Programmable passive Talbot optical waveform amplifier.

We introduce and experimentally demonstrate a new design for passive Talbot amplification of repetitive optical waveforms, in which the gain factor can be electrically reconfigurable. The amplifier setup is composed of an electro-optic phase modulator followed by an optical dispersive medium. In contrast to conventional Talbot amplification, here we achieve different amplification factors by using combinations of fixed dispersion and programmable temporal phase modulation. To validate the new design, we experimentally show tunable, passive amplification of picosecond optical pulses with gain factors from m = 2 to 30 using a fixed dispersive line (a linearly chirped fiber Bragg grating).

Lossless fractional repetition-rate multiplication of optical pulse trains.

We propose and experimentally demonstrate repetition-rate multiplication of picosecond optical pulse trains by a fractional factor based on temporal self-imaging, involving temporal phase modulation and first-order dispersion. Multiplication factors of 1.25, 1.33, 1.5, 1.6, 1.75, 2.25, 2.33, and 2.5 are achieved with high fidelity from a mode-locked laser with an input repetition-rate between 10 and 20 GHz.

Noiseless intensity amplification of repetitive signals by coherent addition using the temporal Talbot effect.

Amplification of signal intensity is essential for initiating physical processes, diagnostics, sensing, communications and measurement. During traditional amplification, the signal is amplified by multiplying the signal carriers through an active gain process, requiring the use of an external power source. In addition, the signal is degraded by noise and distortions that typically accompany active gain processes. We show noiseless intensity amplification of repetitive optical pulse waveforms with gain from 2 to ~20 without using active gain. The proposed method uses a dispersion-induced temporal self-imaging (Talbot) effect to redistribute and coherently accumulate energy of the original repetitive waveforms into fewer replica waveforms. In addition, we show how our passive amplifier performs a real-time average of the wave-train to reduce its original noise fluctuation, as well as enhances the extinction ratio of pulses to stand above the noise floor. Our technique is applicable to repetitive waveforms in any spectral region or wave system.

Soliton Self-Frequency Shift: Experimental Demonstrations and Applications.

Soliton self-frequency shift (SSFS), a consequence of Raman self-pumping that continuously red-shifts a soliton pulse, has been widely studied recently for applications to fiber-based sources and signal processing. In this paper, the fundamentals of SSFS are reviewed. Various fiber platforms for SSFS (single-mode fiber, microstructured fiber, and higher order mode fiber) are presented and experimental SSFS demonstrations in these fibers are discussed. Observation of Cerenkov radiation in fibers exhibiting SSFS is also presented. A number of interesting applications of SSFS, such as wavelength-agile lasers, analog-to-digital conversion, and slow light, are briefly discussed.

Generation of 3.5 nJ femtosecond pulses from a continuous-wave laser without mode locking.

Using time-lens compression in a loop configuration, we generate 516 fs pulses at 3.5 nJ pulse energy from a continuous-wave 1.55 mum source without mode locking. Just as a spatial lens can expand or focus a beam in space, so can a time-lens broaden or compress a pulse in time. By placing a time-lens in a loop, we maximize the efficiency of bandwidth generation by using one time-lens driven at low power to emulate a stack of many lenses. Our system is compact, is all fiber, and allows large tuning of the repetition rate and continuous tuning of the pulse width and center wavelength.

Generation of femtosecond pulses at 1350 nm by Cerenkov radiation in higher-order-mode fiber.

We demonstrate a method of generating short pulses at 1350 nm by exciting Cerenkov radiation in a higher-order-mode fiber with a 1064 nm femtosecond fiber laser. We measure a 106 fs, 0.66 nJ output pulse. Cerenkov radiation in fibers allows for energy transfer between a soliton and a dispersive wave, providing an effective and engineerable platform to shift the wavelength of a femtosecond source. With appropriate design of the higher-order-mode fiber, this method of generating short pulses at 1350 nm can be extended to other wavelengths and to higher pulse energies.

Demonstration of soliton self-frequency shift below 1300 nm in higher-order mode, solid silica-based fiber.

We demonstrate soliton self-frequency shift of more than 12% of the optical frequency in a higher-order mode solid, silica-based fiber below 1300nm. This new class of fiber shows great promise for supporting Raman-shifted solitons below 1300nm in intermediate energy regimes of 1 to 10nJ that cannot be reached by index-guided photonic crystal fibers or air-core photonic bandgap fibers. By changing the input pulse energy of 200fs pulses from 1.36 to 1.63nJ we observe Raman-shifted solitons between 1064 and 1200nm with up to 57% power conversion efficiency and compressed output pulse widths less than 50fs. Furthermore, due to the dispersion characteristics of the HOM fiber, we observe redshifted Cerenkov radiation in the normal dispersion regime for appropriately energetic input pulses.

Compensation of self-phase modulation in fiber-based chirped-pulse amplification systems.

We demonstrate a simple, all-fiber technique for removing nonlinear phase due to self-phase modulation in fiber-based chirped-pulse amplification (CPA) systems. Using a LiNbO3 electro-optic phase modulator to emulate a negative nonlinear index of refraction, we are able to remove 1.0 pi rad of self-phase modulation acquired by pulses during amplification and eliminate nearly all pulse distortion. Our technique is high speed, removes nonlinear phase on a pulse-to-pulse basis, and can be readily integrated into existing CPA systems.

Ultrafast optical delay line by use of a time-prism pair.

We demonstrate an all-fiber, programmable, ultrafast optical delay line based on reversible frequency conversion by use of a time-prism pair. Using electro-optic phase modulators to provide the time-prism phase profile, we show a record scanning rate of 0.5 GHz and a delay range of 19.0 ps. Computer modeling suggests that aberration correction in the time-prism system can extend the delay range to 28.0 ps. Finally, limitations and potential improvement of our techniques are discussed.

Ultrafast optical delay line using soliton propagation between a time-prism pair.

Through theoretical analysis and experiment, we show that the performance of an ultrafast optical delay line using a time-prism pair is significantly improved when solition propagation is used between time-prisms. The enhancement is most dramatic for short pulses where dispersive pulse broadening in a linear propagation regime between time-prisms is large and limits perfomance. Experimentally, we demonstrate an optical delay line using soliton propagation in an all-fiber configuration allowing us to achieve a scan rate of 0.5 GHz, a delay range of 33.0 ps, no pre- and post-dispersion compensation, and a delay-to-pulse-width ratio of 6.0.

Simultaneous spatial and temporal focusing of femtosecond pulses.

We study and demonstrate the technique of simultaneous spatial and temporal focusing of femtosecond pulses, with the aim to improve the signal-to-background ratio in multiphoton imaging. This concept is realized by spatially separating spectral components of pulses into a "rainbow beam" and recombining these components only at the spatial focus of the objective lens. Thus, temporal pulse width becomes a function of distance, with the shortest pulse width confined to the spatial focus. We developed analytical expressions to describe this method and experimentally demonstrated the feasibility. The concept of simultaneous spatial and temporal focusing of femtosecond pulses has the great potential to significantly reduce the background excitation in multiphoton microscopy, which fundamentally limits the imaging depth in highly scattering biological specimens.

All-optical, wavelength and bandwidth preserving, pulse delay based on parametric wavelength conversion and dispersion.

We demonstrate an all-optical tunable delay in fiber based on wavelength conversion, group-velocity dispersion, and wavelength reconversion. The device operates near 1550 nm and generates delays greater than 800 ps. Our delay technique has the combined advantages of continuous control of a wide range of delays from picoseconds to nanoseconds, for a wide range of signal pulse durations (ps to 10 ns), and an output signal wavelength and bandwidth that are the same as that of the input. The scheme can potentially produce fractional delays of 1000 and is applicable to both amplitude- and phase-shift keyed data.

Multiwavelength pulse generator using time-lens compression.

We demonstrate a novel method of generating a multiwavelength pulse train by use of time-lens compression. In addition to pulse compression, this time lens simultaneously displaces the pulses according to their center wavelengths, resulting in a temporally evenly spaced multiwavelength pulse train. We further demonstrate a new aberration-correction technique based on the temporal analog of a spatial correction lens to improve the quality of the compressed pulses. Through the use of cw distributed-feedback lasers and electro-optic phase modulators, the all-fiber system allows complete tunability of temporal spacing, spectral profile, and repetition rate.