Maxillomandibular advancement in edentulous patients as a treatment option for obstructive sleep apnea: report of two cases and a proposed treatment protocol.

Obstructive sleep apnea (OSA) is a common disease that often causes debilitating symptoms. In its most severe form, OSA increases the risk of cardiovascular disease and mortality. OSA is characterized by repeated episodes of pharyngeal collapse leading to airway obstruction. The treatment options available in severe cases are limited to continuous positive airway pressure ventilation and maxillomandibular advancement (MMA). OSA is particularly difficult to treat successfully in edentulous patients. Two cases are presented here to illustrate use of MMA in edentulous patients with OSA. Our learning points based on these cases are shared, and a treatment and follow-up protocol is proposed for this specific patient group.

Accuracy of Computer-Assisted Template-Guided Autotransplantation of Teeth With Custom Three-Dimensional Designed/Printed Surgical Tooling: A Cadaveric Study.

PURPOSE: The aim of the present cadaveric study was to assess the accuracy of computer-assisted template-guided autotransplantation of teeth with custom 3-dimensional (3D) designed/printed surgical tooling. MATERIALS AND METHODS: Ten partially edentulous human mandibular cadavers were scanned using a cone-beam computed tomography (CBCT) system and an intraoral scanning system. The 3D data of these cadavers were imported to specialized software and used to analyze the region of the recipient sites, and the donor teeth were selected. Subsequently, congruent to the donor teeth, custom surgical tooling and surgical-guided templates were designed and 3D printed. The guided osteotomies were performed and the donor teeth transplanted. To evaluate the planned donor teeth positions compared with the transplanted donor teeth positions, the mandibles were scanned again using the CBCT system, and software matching was applied to measure the accuracy of the procedure. RESULTS: The mean angular deflection of the transplanted donor teeth with the planned donor teeth positions was 5.6 ± 5.4°. Comparing the 3D positions of the shoulders, a mean deviation of 3.15 ± 1.16 mm and a mean apical deviation of 2.61 ± 0.78 mm were found. CONCLUSIONS: The described method of computer-assisted template-guided autotransplantation of teeth with custom 3D designed/printed surgical tooling could potentially provide a relatively accurate alternative for the currently available treatment approaches. Further research should focus on improving the accuracy of this technique and evaluating the clinical success and advantages of this method.

Neuropathic Pain Due to Iatrogenic Lingual Nerve Lesion: Nerve Grafting to Reduce Otherwise Untreatable Pain.

Iatrogenic lingual nerve lesion is a well-known and unfortunate complication after mandibular third molar removal. Occasionally, the nerve injury can cause severe neuropathic pain.Here, the authors present the history of 2 patients with lingual nerve injury due to mandibular third molar removal, and with severe neuropathic pain in the craniomandibular region. Pharmacotherapy and physiotherapy did not reduce the pain, and ultimately, the lingual nerve was surgically explored. Scar tissue and a lingual nerve neuroma were observed and resected in both patients.In the first patient, the gap between the nerve stumps was bridged with an autologous sural nerve graft. In the second patient, some continuity of the lingual nerve was preserved and the resected part was substituted with an autologous sural nerve graft. Significant pain reduction was achieved in both patients and no further medical treatment was necessary at the end of follow-up.These reports show that lingual nerve reconstruction can be a successful therapy in patients experiencing severe neuropathic pain after iatrogenic lingual nerve injury. Different treatment options for neuropathic pain due to lingual nerve injury are discussed.

A Novel Approach for Computer-Assisted Template-Guided Autotransplantation of Teeth With Custom 3D Designed/Printed Surgical Tooling. An Ex Vivo Proof of Concept.

PURPOSE: The aim of this study was to introduce a novel method for accurate autotransplantation with computer-assisted guided templates and assembled custom-designed surgical tooling and to test the feasibility and accuracy of this method ex vivo. MATERIALS AND METHODS: A partially edentulous human mandibular cadaver was scanned with a cone-beam computed tomography (CBCT) system and an intraoral scan system. The 3-dimensional (3D) data of this cadaver were imported into specialized software and used to analyze the region of the recipient site and the donor tooth was selected. Subsequently, congruent to the donor tooth, custom surgical tools and a surgical guided template were designed and 3D printed. The guided osteotomy was performed and the donor tooth was transplanted. To evaluate the planned position of the donor tooth in relation to the position of the transplanted donor tooth, the mandible with the transplanted donor tooth was rescanned with the CBCT system and software matching was applied to measure the accuracy of the procedure. RESULTS: The angular deflection of the transplanted donor tooth in relation to the planned donor tooth position was 3.1°. When comparing the 3D positions of the shoulder, there was a deviation of 1.25 mm and an apical deviation of 0.89 mm. CONCLUSION: With the use of currently available technology, it is feasible to accurately plan and create in a virtual simulation a donor tooth position with congruent custom surgical tools and to transfer this to a clinical setting with 3D printing. However, further research on multiple levels is needed to explore this novel approach.

Experiencing your own orthognathic surgery: a personal case report.

There has been much research on minimizing the side effects of orthognathic surgery. However, there are very few doctors and researchers who themselves have undergone this surgery. This case report describes the findings of a maxillofacial surgeon who underwent combined orthodontic and orthognathic treatment for correction of Class II malocclusion. In March 2012, the surgeon was referred to an orthodontist, and an orthodontic examination revealed a Class II, division 2, malocclusion with a traumatic palatal bite and attrition of the lower front teeth. The patient underwent alignment of the upper and lower arches, followed by a bilateral sagittal split osteotomy. During this treatment, he made many interesting observations and learned much as a patient, which can have implications in improving the outcomes and quality of care for patients receiving such treatment. Thus, this case report aims to provide a critical perspective of the surgical procedure and treatment from the viewpoint of a maxillofacial surgeon who himself experienced the surgery as a patient.

Neurosensory disturbances one year after bilateral sagittal split osteotomy of the mandibula performed with separators: a multi-centre prospective study.

Bilateral sagittal split osteotomy (BSSO) is an effective and commonly used treatment to correct mandibular hypo- and hyperplasia. Hypoesthesia of the inferior alveolar nerve (IAN) is a common complication of this surgical procedure. This prospective multi-centre study aimed to determine the incidence of neurosensory disturbances of the IAN after BSSO procedures performed without the use of chisels. Our study group comprised 158 patients, with a follow-up period of 1 year, who underwent BSSO (with or without Le Fort I) that incorporated the use of sagittal split separators and splitters but no chisels. The percentage of BSSO split procedures that resulted in IAN damage was 5.1%. The percentage of patients (without genioplasty) who experienced IAN damage was 8.9%. The concomitant genioplasty in combination with BSSO was significantly associated with hypoesthesia. Peri-operative removal of the wisdom tooth or a Le Fort I procedure did not influence post-operative hypoesthesia. We believe that the use of splitting forceps and elevators without chisels leads to a lower incidence of persistent post-operative hypoesthesia 1 year after BSSO of the mandible, without increasing the risk of a bad split.

HSPG-deficient zebrafish uncovers dental aspect of multiple osteochondromas.

Multiple Osteochondromas (MO; previously known as multiple hereditary exostosis) is an autosomal dominant genetic condition that is characterized by the formation of cartilaginous bone tumours (osteochondromas) at multiple sites in the skeleton, secondary bursa formation and impingement of nerves, tendons and vessels, bone curving, and short stature. MO is also known to be associated with arthritis, general pain, scarring and occasional malignant transformation of osteochondroma into secondary peripheral chondrosarcoma. MO patients present additional complains but the relevance of those in relation to the syndromal background needs validation. Mutations in two enzymes that are required during heparan sulphate synthesis (EXT1 or EXT2) are known to cause MO. Previously, we have used zebrafish which harbour mutations in ext2 as a model for MO and shown that ext2⁻/⁻ fish have skeletal defects that resemble those seen in osteochondromas. Here we analyse dental defects present in ext2⁻/⁻ fish. Histological analysis reveals that ext2⁻/⁻ fish have very severe defects associated with the formation and the morphology of teeth. At 5 days post fertilization 100% of ext2⁻/⁻ fish have a single tooth at the end of the 5(th) pharyngeal arch, whereas wild-type fish develop three teeth, located in the middle of the pharyngeal arch. ext2⁻/⁻ teeth have abnormal morphology (they were shorter and thicker than in the WT) and patchy ossification at the tooth base. Deformities such as split crowns and enamel lesions were found in 20% of ext2⁺/⁻ adults. The tooth morphology in ext2⁻/⁻ was partially rescued by FGF8 administered locally (bead implants). Our findings from zebrafish model were validated in a dental survey that was conducted with assistance of the MHE Research Foundation. The presence of the malformed and/or displaced teeth with abnormal enamel was declared by half of the respondents indicating that MO might indeed be also associated with dental problems.