Secondary metabolic profiling of Serratia marcescens NP10 reveals new stephensiolides and glucosamine derivatives with bacterial membrane activity.

Secondary metabolic profiling, using UPLC-MSE and molecular networking, revealed the secondary metabolites produced by Serratia marcescens NP10. The NP10 strain co-produced cyclic and open-ring stephensiolides (i.e., fatty acyl chain linked to Thr-Ser-Ser-Ile/Leu-Ile/Leu/Val) and glucosamine derivatives (i.e., fatty acyl chain linked to Val-glucose-butyric/oxo-hexanoic acid), with the structures of sixteen new stephensiolides (L-Y) and three new glucosamine derivatives (L-N) proposed. Genome mining identified sphA (stephensiolides) and gcd (glucosamine derivatives) gene clusters within Serratia genomes available on NBCI using antiSMASH, revealing specificity scores of the adenylation-domains within each module that corroborates MSE data. Of the nine RP-HPLC fractions, two stephensiolides and two glucosamine derivatives exhibited activity against Staphylococcus aureus (IC50 of 25-79 µg/mL). 1H NMR analysis confirmed the structure of the four active compounds as stephensiolide K, a novel analogue stephensiolide U, and glucosamine derivatives A and C. Stephensiolides K and U were found to cause membrane depolarisation and affect the membrane permeability of S. aureus, while glucosamine derivatives A and C primarily caused membrane depolarisation. New members of the stephensiolide and glucosamine derivative families were thus identified, and results obtained shed light on their antibacterial properties and mode of membrane activity.

Antimicrobial nano-assemblies of tryptocidine C, a tryptophan-rich cyclic decapeptide, from ethanolic solutions.

Tryptocidine C (TpcC), a Trp-rich cyclodecapeptide is a minor constituent in the antibiotic tyrothricin complex from Brevibacillus parabrevis. TpcC possesses a high tendency to oligomerise in aqueous solutions and dried TpcC forms distinct self-assembled nanoparticles. High-resolution scanning electron microscopy revealed the influence of different ethanol:water solvent systems on TpcC self-assembly, with the TpcC, dried from a high concentration in 15% ethanol, primarily assembling into small nanospheres with 24.3 nm diameter and 0.05 polydispersity. TpcC at 16 µM, near its CMC, formed a variety of structures such as small nanospheres, large dense nanospheroids and facetted 3-D-crystals, as well as sheets and coarse carpet-like structures which depended on ethanol concentration. Drying 16 µM TpcC from 75% ethanol resulted in highly facetted 3-D crystals, as well as small nanospheres, while those in 10% ethanol preparation had less defined facets. Drying from 20 to 50% ethanol led to polymorphic architectures with a few defined nanospheroids and various small nanoparticles, imbedded in carpet- and sheet-like structures. These polymorphic surface morphologies correlated with maintenance of fluorescence properties and the surface-derived antibacterial activity against Staphylococcus aureus over time, while there was a significant change in fluorescence and loss in activity in the 10% and 75% preparations where 3-D crystals were observed. This indicated that TpcC oligomerisation in solutions with 20-50% ethanol leads to metastable structures with a high propensity for release of antimicrobial moieties, while those leading to crystallisation limit active moieties release. TpcC nano-assemblies can find application in antimicrobial coatings, surface disinfectants, food packaging and wound healing materials.

Creating Robust Antimicrobial Materials with Sticky Tyrocidines.

Modified antimicrobial and antifouling materials and surfaces can be used to limit the propagation of microorganisms on various surfaces and minimise the occurrence of infection, transfer, and spoilage. Increased demand for 'green' solutions for material treatment has pushed the focus towards to naturally produced antimicrobials. Tyrocidines, cyclo-decapeptides naturally produced by a soil bacterium Brevibacillus parabrevis, have a broad spectrum of activity against Gram-positive and Gram-negative bacteria, filamentous fungi, and yeasts. Continual losses in tyrocidine production highlighted the possible association of peptides to surfaces. It was found in this study that tyrocidines readily associates with many materials, with a selectivity towards polysaccharide-type materials, such as cellulose. Peptide-treated cellulose was found to remain active after exposure to a broad pH range, various temperatures, salt solutions, water washes, and organic solvents, with the sterilising activity only affected by 1% SDS and 70% acetonitrile. Furthermore, a comparison to other antimicrobial peptides showed the association between tyrocidines and cellulose to be unique in terms of antimicrobial activity. The robust association between the tyrocidines and various materials holds great promise in applications focused on preventing surface contamination and creating self-sterilising materials.

The Influence of Cellulose-Type Formulants on Anti-Candida Activity of the Tyrocidines.

Candida species are highly adaptable to environmental changes with their phenotypic flexibility allowing for the evasion of most host defence mechanisms. Moreover, increasing resistance of human pathogenic Candida strains has been reported against all four classes of available antifungal drugs, which highlights the need for combinational therapies. Tyrocidines are cyclic antimicrobial peptides that have shown synergistic activity with antifungal drugs such as caspofungin and amphotericin B. However, these cyclodecapeptides have haemolytic activity and cytotoxicity, but they have been used for decades in the clinic for topical applications. The tyrocidines tend to form higher-order structures in aqueous solutions and excessive aggregation can result in variable or diminished activity. Previous studies have shown that the tyrocidines prefer ordered association to celluloses. Therefore, a formulation with soluble cellulose was used to control the oligomer stability and size, thereby increasing the activity against Candida spp. Of the formulants tested, it was found that commercial hydroxy-propyl-methyl cellulose, E10M, yielded the best results with increased stability, increased anti-Candida activity, and improved selectivity. This formulation holds promise in topical applications against Candida spp. infections.

High throughput method to determine the surface activity of antimicrobial polymeric materials.

Surface colonization by microorganisms, combined with the rise in antibiotic resistance, is the main cause of production failures in various industries. Self-sterilising materials are deemed the best prevention of surface colonization. However, current screening methods for these sterilising materials are laborious and time-consuming. The disk diffusion antimicrobial assay and the Japanese industrial standard method for antimicrobial activity on solid surfaces, JIS Z 2801, were compared to our modified solid surface antimicrobial assay in terms of detecting the activity of antibiotic-containing cellulose disks against four bacterial pathogens. Our novel assay circumvents the long incubation times by utilising the metabolic active dye, resazurin, to shorten the time in which antibacterial results are obtained to less than 4 h. This assay allows for increased screening to identify novel sterilising materials for combatting surface colonisation.•Disk diffusion assay could only detect the activity of small compounds that leached from the material over 20-24 h.•JIS Z 2801 was also able to detect the surface activity of non-polar compounds, thought to be inactive based on the disk diffusion results.•The resazurin solid surface antimicrobial assay could obtain the same results as the JIS Z 2801, within a shorter time and in a high-throughput 96-well plate setup.

Tyrocidine A interactions with saccharides investigated by CD and NMR spectroscopies.

Tyrocidines are a family of cyclic decapeptides produced by the soil bacterium, Brevibacillus parabrevis. These antibiotic peptides can be used to prevent infections in agriculture and food industry but also to prepare antimicrobial lozenges, creams, and dressings for medical applications. It has been observed that the tyrocidines interact with saccharides such as cellulose from their soil environment, as well as sugars in culture media and glycans in fungal cell walls. Here, we investigated the interactions of tyrocidines with glucose, sucrose, and cellotetraose (as cellulose model) in a quantitative fashion utilising CD and NMR spectroscopy. The CD and NMR spectra of tyrocidine A (TrcA) were analysed as a function of solvent composition, and the spectral properties agree with the formation of oligomeric structures that are governed by ß-sheet secondary structures once the acetonitrile content of the solvent is increased. Saccharides seem to also induce TrcA spectral changes reverting those induced by organic solvents. The CD spectral changes of TrcA in the presence of glucose agree with new ordered H-bonding, possibly ß-sheet structures. The amides involved in intramolecular H-bonding remained largely unaffected by the environmental changes. In contrast, amides exposed to the exterior and/or involved in TrcA intermolecular association show the largest 1 H chemical shift changes. CD and NMR spectroscopic investigations correlated well with TrcA-glucose interactions characterized by a dissociation constant around 200 µM. Interestingly, the association of cellotetraose corresponds closely to the additive effect from four glucose moieties, while a much higher dissociation constant was observed for sucrose. Similar trends to TrcA for binding to the three saccharides were observed for the analogous tyrocidines, tyrocidine B, and tyrocidine C. These results therefore indicate that the tyrocidine interactions with the glucose monosaccharide unit are fairly specific and reversible.

The Multifaceted Antibacterial Mechanisms of the Pioneering Peptide Antibiotics Tyrocidine and Gramicidin S.

Cyclic ß-sheet decapeptides from the tyrocidine group and the homologous gramicidin S were the first commercially used antibiotics, yet it remains unclear exactly how they kill bacteria. We investigated their mode of action using a bacterial cytological profiling approach. Tyrocidines form defined ion-conducting pores, induce lipid phase separation, and strongly reduce membrane fluidity, resulting in delocalization of a broad range of peripheral and integral membrane proteins. Interestingly, they also cause DNA damage and interfere with DNA-binding proteins. Despite sharing 50% sequence identity with tyrocidines, gramicidin S causes only mild lipid demixing with minor effects on membrane fluidity and permeability. Gramicidin S delocalizes peripheral membrane proteins involved in cell division and cell envelope synthesis but does not affect integral membrane proteins or DNA. Our results shed a new light on the multifaceted antibacterial mechanisms of these antibiotics and explain why resistance to them is virtually nonexistent.IMPORTANCE Cyclic ß-sheet decapeptides, such as tyrocidines and gramicidin S, were among the first antibiotics in clinical application. Although they have been used for such a long time, there is virtually no resistance to them, which has led to a renewed interest in this peptide class. Both tyrocidines and gramicidin S are thought to disrupt the bacterial membrane. However, this knowledge is mainly derived from in vitro studies, and there is surprisingly little knowledge about how these long-established antibiotics kill bacteria. Our results shed new light on the antibacterial mechanism of ß-sheet peptide antibiotics and explain why they are still so effective and why there is so little resistance to them.