ABSTRACT
An on-line sequential injection titration system for the determination of the concentration of concentrated hydrochloric acid as final product from a hydrochloric acid production plant is described. The system involves on-line dilution of the concentrated hydrochloric acid solution to an acceptable range for direct measurement by merging the sample stream with a de-ionized water diluent stream, followed by mixing in a dilution coil, before aspiration into the sequential injection system. Concentrated standard solutions were treated in exactly the same way as the samples. The system was evaluated for reproducibility, linearity, accuracy, and sample throughput. A linear relationship between peak width and logarithm of acid concentration was found in the range 5.934-8.995 mol l(-1) and a concentration of 0.005 mol l(-1) NaOH solution was used as titrant. Samples from the production plant showed excellent agreement when compared with the manual and automated batchwise titrations. The relative standard deviation was found to be less than 0.4% with a sample frequency of 30 samples per hour.
ABSTRACT
A simple method for the rapid determination of paracetamol in pharmaceutical formulations is described. The method involves oxidation of paracetamol by potassium hexacyanoferrate(III) and a subsequent reaction with phenol in the presence of ammonia. The blue complex formed is measured at 630 nm. The system has a sample frequency of 27 samples per h with a detection limit of 0.2 mg l(-1). The calibration curve is linear up to 60 mg l(-1) with a relative standard deviation of 1.2% (n=10).
ABSTRACT
A simple and reliable sequential injection analysis (SIA) system is described for the determination of boron as boric acid in eye lotions. This method is based on the complexation reaction between d-sorbitol and boric acid followed by the acid-base reaction with methyl orange (MO). The colour change reaction is monitored at 520 nm. The system is able to monitor boron at a frequency of 30 samples per h with a relative standard deviation of less than 0.6%. The calibration graph is linear up to 12-mg l(-1). The system has a detection limit of 0.06-mg l(-1). No significant differences (at 95% probability level) were found between the proposed SIA method and the reference method.
ABSTRACT
A potentiometric SI titration system for the determination of total acidity in soft drinks is proposed. The concept is based on the aspiration of the acid soft drink sample between two base zones into a holding coil with the volume of the first base zone twice to that of the second one and channelled by flow reversal through a reaction coil to a potentiometric sensor. A solution of 0.1 mol l(-1) sodium chloride is used as ionic strength adjustment buffer in the carrier stream. The system has been applied to the analysis of some South African soft drinks having a total acidity level of about 0.2-0.3% (w/v). The method has a sample frequency of 45 samples per h with a linear range of 0.1 and 0.6% (w/v). It is easy to use, fully computerised, and gives the results that are comparable to both automated batch titration and manual titration.
ABSTRACT
A dialyser unit, equipped with a passive neutral membrane, was incorporated into the conduits of a sequential injection (SI) system for the on-line removal of suspended solids and simultaneous dilution of the analyte before reaction and detection of the analyte. The system was applied to the determination of zinc(II) in fertilisers. The fully automated system is able to analyse zinc at a sampling frequency of ten samples per hour at a %R.S.D. of better than 0.55. The calibration graph was linear between 10 and 50 mg l(-1). The detection limit was found to be 4.75 mg l(-1). The results obtained with the proposed SI analyser compared favourably with the standard manual flame atomic absorption spectrometric method.
