Scaling up BiVO4 Photoanodes on Porous Ti Transport Layers for Solar Hydrogen Production.

Commercialization of photoelectrochemical (PEC) water-splitting devices requires the development of large-area, low-cost photoanodes with high efficiency and photostability. Herein, we address these challenges by using scalable fabrication techniques and porous transport layer (PTLs) electrode supports. We demonstrate the deposition of W-doped BiVO4 on Ti PTLs using successive-ionic-layer-adsorption-and-reaction methods followed by boron treatment and chemical bath deposition of NiFeOOH co-catalyst. The use of PTLs that facilitate efficient mass and charge transfer allowed the scaling of the photoanodes (100 cm2 ) while maintaining ~90 % of the performance obtained with 1 cm2 photoanodes for oxygen evolution reaction, that is, 2.10 mA cm-2 at 1.23 V vs. RHE. This is the highest reported performance to date. Integration with a polycrystalline Si PV cell leads to bias-free water splitting with a stable photocurrent of 208 mA for 6 h and 2.2 % solar-to-hydrogen efficiency. Our findings highlight the importance of photoelectrode design towards scalable PEC device development.

Observation and rationalization of nitrogen oxidation enabled only by coupled plasma and catalyst.

Heterogeneous catalysts coupled with non-thermal plasmas (NTP) are known to achieve reaction yields that exceed the contributions of the individual components. Rationalization of the enhancing potential of catalysts, however, remains challenging because the background contributions from NTP or catalysts are often non-negligible. Here, we first demonstrate platinum (Pt)-catalyzed nitrogen (N2) oxidation in a radio frequency plasma afterglow at conditions at which neither catalyst nor plasma alone produces significant concentrations of nitric oxide (NO). We then develop reactor models based on reduced NTP- and surface-microkinetic mechanisms to identify the features of each that lead to the synergy between NTP and Pt. At experimental conditions, NTP and thermal catalytic NO production are suppressed by radical reactions and high N2 dissociation barrier, respectively. Pt catalyzes NTP-generated radicals and vibrationally excited molecules to produce NO. The model construction further illustrates that the optimization of productivity and energy efficiency involves tuning of plasma species, catalysts properties, and the reactor configurations to couple plasma and catalysts. These results provide unambiguous evidence of synergism between plasma and catalyst, the origins of that synergy for N2 oxidation, and a modeling approach to guide material selection and system optimization.

Plasma Driven Exsolution for Nanoscale Functionalization of Perovskite Oxides.

Perovskite oxides with dispersed nanoparticles on their surface are considered instrumental in energy conversion and catalytic processes. Redox exsolution is an alternative method to the conventional deposition techniques for directly growing well-dispersed and anchored nanoarchitectures from the oxide support through thermochemical or electrochemical reduction. Herein, a new method for such nanoparticle nucleation through the exposure of the host perovskite to plasma is shown. The applicability of this new method is demonstrated by performing catalytic tests for CO2 hydrogenation over Ni exsolved nanoparticles prepared by either plasma or conventional H2 reduction. Compared to the conventional thermochemical H2 reduction, there are plasma conditions that lead to the exsolution of a more than ten times higher Ni amount from a lanthanum titanate perovskite, which is similar to the reported values of the electrochemical method. Unlike the electrochemical method, however, plasma does not require the integration of the material in an electrochemical cell, and is thus applicable to a wide range of microstructures and physical forms. Additionally, when N2 plasma is employed, the nitrogen species are stripping out oxygen from the perovskite lattice, generating a key chemical intermediate, such as NO, rendering this technology even more appealing.

Electrochemical Activation of Atomic Layer-Deposited Cobalt Phosphate Electrocatalysts for Water Oxidation.

The development of efficient and stable earth-abundant water oxidation catalysts is vital for economically feasible water-splitting systems. Cobalt phosphate (CoPi)-based catalysts belong to the relevant class of nonprecious electrocatalysts studied for the oxygen evolution reaction (OER). In this work, an in-depth investigation of the electrochemical activation of CoPi-based electrocatalysts by cyclic voltammetry (CV) is presented. Atomic layer deposition (ALD) is adopted because it enables the synthesis of CoPi films with cobalt-to-phosphorous ratios between 1.4 and 1.9. It is shown that the pristine chemical composition of the CoPi film strongly influences its OER activity in the early stages of the activation process as well as after prolonged exposure to the electrolyte. The best performing CoPi catalyst, displaying a current density of 3.9 mA cm-2 at 1.8 V versus reversible hydrogen electrode and a Tafel slope of 155 mV/dec at pH 8.0, is selected for an in-depth study of the evolution of its electrochemical properties, chemical composition, and electrochemical active surface area (ECSA) during the activation process. Upon the increase of the number of CV cycles, the OER performance increases, in parallel with the development of a noncatalytic wave in the CV scan, which points out to the reversible oxidation of Co2+ species to Co3+ species. X-ray photoelectron spectroscopy and Rutherford backscattering measurements indicate that phosphorous progressively leaches out the CoPi film bulk upon prolonged exposure to the electrolyte. In parallel, the ECSA of the films increases by up to a factor of 40, depending on the initial stoichiometry. The ECSA of the activated CoPi films shows a universal linear correlation with the OER activity for the whole range of CoPi chemical composition. It can be concluded that the adoption of ALD in CoPi-based electrocatalysis enables, next to the well-established control over film growth and properties, to disclose the mechanisms behind the CoPi electrocatalyst activation.

High-Throughput Computational Screening of Cubic Perovskites for Solid Oxide Fuel Cell Cathodes.

It is a present-day challenge to design and develop oxygen-permeable solid oxide fuel cell (SOFC) electrode and electrolyte materials that operate at low temperatures. Herein, by performing high-throughput density functional theory calculations, oxygen vacancy formation energy, Evac, data for a pool of all-inorganic ABO3 and AI0.5AII0.5BO3 cubic perovskites is generated. Using Evac data of perovskites, the area-specific resistance (ASR) data, which is related to both oxygen reduction reaction activity and selective oxygen ion conductivity of materials, is calculated. Screening a total of 270 chemical compositions, 31 perovskites are identified as candidates with properties that are between those of state-of-the-art SOFC cathode and oxygen permeation components. In addition, an intuitive approach to estimate Evac and ASR data of complex perovskites by using solely the easy-to-access data of simple perovskites is shown, which is expected to boost future explorations in the perovskite material search space for genuinely diverse energy applications.

Charge carrier dynamics and photocatalytic activity of {111} and {100} faceted Ag3PO4 particles.

Silver orthophosphate is a highly promising visible light photocatalyst with high quantum yield for solar driven water oxidation. Recently, the performance of this material has been further enhanced using facet-controlled synthesis. The tetrahedral particles with {111} exposed facets demonstrate higher photocatalytic performance than the cubic particles with {100} exposed facets. However, the reason behind this large difference in photocatalytic performance is still not understood. In this work, we study the free charge carrier dynamics, such as mobility, lifetime, and diffusion lengths, for the {111}-faceted tetrahedral and the {100}-faceted cubic particles using time-resolved microwave conductivity measurements. An order of magnitude higher charge carrier mobility and diffusion length are found for the tetrahedral particles as compared to the cubic particles. The differences in crystal structure, surface composition, and optical properties are investigated in order to understand how these properties impact the charge carrier dynamics and the photocatalytic performance of differently faceted particles.

Solar Hydrogen Generation from Ambient Humidity Using Functionalized Porous Photoanodes.

Solar hydrogen is a promising sustainable energy vector, and steady progress has been made in the development of photoelectrochemical (PEC) cells. Most research in this field has focused on using acidic or alkaline liquid electrolytes for ionic transfer. However, the performance is limited by (i) scattering of light and blocking of catalytic sites by gas bubbles and (ii) mass transport limitations. An attractive alternative to a liquid water feedstock is to use the water vapor present as humidity in ambient air, which has been demonstrated to mitigate the above problems and can expand the geographical range where these devices can be utilized. Here, we show how the functionalization of porous TiO2 and WO3 photoanodes with solid electrolytes-proton conducting Aquivion and Nafion ionomers-enables the capture of water from ambient air and allows subsequent PEC hydrogen production. The optimization strategy of photoanode functionalization was examined through testing the effect of ionomer loading and the ionomer composition. Optimized functionalized photoanodes operating at 60% relative humidity (RH) and Tcell = 30-70 °C were able to recover up to 90% of the performance obtained at 1.23 V versus reverse hydrogen electrode (RHE) when water is introduced in the liquid phase (i.e., conventional PEC operation). Full performance recovery is achieved at a higher applied potential. In addition, long-term experiments have shown remarkable stability at 60% RH for 64 h of cycling (8 h continuous illumination-8 h dark), demonstrating that the concept can be applicable outdoors.

In Situ Observation of Nanoparticle Exsolution from Perovskite Oxides: From Atomic Scale Mechanistic Insight to Nanostructure Tailoring.

Understanding and controlling the formation of nanoparticles at the surface of functional oxide supports is critical for tuning activity and stability for catalytic and energy conversion applications. Here, we use a latest generation environmental transmission electron microscope to follow the exsolution of individual nanoparticles at the surface of perovskite oxides, with ultrahigh spatial and temporal resolution. Qualitative and quantitative analysis of the data reveals the atomic scale processes that underpin the formation of the socketed, strain-inducing interface that confers exsolved particles their exceptional stability and reactivity. This insight also enabled us to discover that the shape of exsolved particles can be controlled by changing the atmosphere in which exsolution is carried out, and additionally, this could also produce intriguing heterostructures consisting of metal-metal oxide coupled nanoparticles. Our results not only provide insight into the in situ formation of nanoparticles but also demonstrate the tailoring of nanostructures and nanointerfaces.

Electrochemistry of Sputtered Hematite Photoanodes: A Comparison of Metallic DC versus Reactive RF Sputtering.

The water splitting activity of hematite is sensitive to the film processing parameters due to limiting factors such as a short hole diffusion length, slow oxygen evolution kinetics, and poor light absorptivity. In this work, we use direct current (DC) magnetron sputtering as a fast and cost-effective route to deposit metallic iron thin films, which are annealed in air to obtain well-adhering hematite thin films on F:SnO2-coated glass substrates. These films are compared to annealed hematite films, which are deposited by reactive radio frequency (RF) magnetron sputtering, which is usually used for depositing metal oxide thin films, but displays an order of magnitude lower deposition rate. We find that DC sputtered films have much higher photoelectrochemical activity than reactive RF sputtered films. We show that this is related to differences in the morphology and surface composition of the films as a result of the different processing parameters. This in turn results in faster oxygen evolution kinetics and lower surface and bulk recombination effects. Thus, fabricating hematite thin films by fast and cost-efficient metallic iron deposition using DC magnetron sputtering is shown to be a valid and industrially relevant route for hematite photoanode fabrication.

Vibrational Kinetics in Plasma as a Functional Problem: A Flux-Matching Approach.

A new approach to calculate the vibrational distribution function of molecules in a medium providing energy for vibrational excitation is proposed and demonstrated. The approach is an improvement of solution methods based on the drift-diffusion Fokker-Planck (FP) equation for a double differentiable function representing the vibrational populations on a continuum internal energy scale. A self-consistent numerical solution avoids approximations used in previous analytical solutions. The dissociation flux, a key parameter in the FP equation, is fixed using the kinetics of molecular dissociation from near-continuum levels, so that the vibrational kinetics becomes a functional problem. The approach is demonstrated for the kinetics of asymmetric stretching of CO2, showing that it represents an alternative, potentially much more efficient in computational terms, to the presently usual state-to-state approach which is based on the kinetics of the populations of individual levels, and gives complementary insight into the dissociation process.

Zeolites for CO2-CO-O2 Separation to Obtain CO2-Neutral Fuels.

Carbon dioxide release has become an important global issue due to the significant and continuous rise in atmospheric CO2 concentrations and the depletion of carbon-based energy resources. Plasmolysis is a very energy-efficient process for reintroducing CO2 into energy and chemical cycles by converting CO2 into CO and O2 utilizing renewable electricity. The bottleneck of the process is that CO remains mixed with O2 and residual CO2. Therefore, efficient gas separation and recuperation are essential for obtaining pure CO, which, via water gas shift and Fischer-Tropsch reactions, can lead to the production of CO2-neutral fuels. The idea behind this work is to provide a separation mechanism based on zeolites to optimize the separation of carbon dioxide, carbon monoxide, and oxygen under mild operational conditions. To achieve this goal, we performed a thorough screening of available zeolites based on topology and adsorptive properties using molecular simulation and ideal adsorption solution theory. FAU, BRE, and MTW are identified as suitable topologies for these separation processes. FAU can be used for the separation of carbon dioxide from carbon monoxide and oxygen and BRE or MTW for the separation of carbon monoxide from oxygen. These results are reinforced by pressure swing adsorption simulations at room temperature combining adsorption columns with pure silica FAU zeolite and zeolite BRE at a Si/Al ratio of 3. These zeolites have the added advantage of being commercially available.

Analysis of temporal evolution of quantum dot surface chemistry by surface-enhanced Raman scattering.

Temporal evolution of surface chemistry during oxidation of silicon quantum dot (Si-QD) surfaces were probed using surface-enhanced Raman scattering (SERS). A monolayer of hydrogen and chlorine terminated plasma-synthesized Si-QDs were spin-coated on silver oxide thin films. A clearly enhanced signal of surface modes, including Si-Clx and Si-Hx modes were observed from as-synthesized Si-QDs as a result of the plasmonic enhancement of the Raman signal at Si-QD/silver oxide interface. Upon oxidation, a gradual decrease of Si-Clx and Si-Hx modes, and an emergence of Si-Ox and Si-O-Hx modes have been observed. In addition, first, second and third transverse optical modes of Si-QDs were also observed in the SERS spectra, revealing information on the crystalline morphology of Si-QDs. An absence of any of the abovementioned spectral features, but only the first transverse optical mode of Si-QDs from thick Si-QD films validated that the spectral features observed from Si-QDs on silver oxide thin films are originated from the SERS effect. These results indicate that real-time SERS is a powerful diagnostic tool and a novel approach to probe the dynamic surface/interface chemistry of quantum dots, especially when they involve in oxidative, catalytic, and electrochemical surface/interface reactions.

Characterization of Nanocrystal Size Distribution using Raman Spectroscopy with a Multi-particle Phonon Confinement Model.

Analysis of the size distribution of nanocrystals is a critical requirement for the processing and optimization of their size-dependent properties. The common techniques used for the size analysis are transmission electron microscopy (TEM), X-ray diffraction (XRD) and photoluminescence spectroscopy (PL). These techniques, however, are not suitable for analyzing the nanocrystal size distribution in a fast, non-destructive and a reliable manner at the same time. Our aim in this work is to demonstrate that size distribution of semiconductor nanocrystals that are subject to size-dependent phonon confinement effects, can be quantitatively estimated in a non-destructive, fast and reliable manner using Raman spectroscopy. Moreover, mixed size distributions can be separately probed, and their respective volumetric ratios can be estimated using this technique. In order to analyze the size distribution, we have formulized an analytical expression of one-particle PCM and projected it onto a generic distribution function that will represent the size distribution of analyzed nanocrystal. As a model experiment, we have analyzed the size distribution of free-standing silicon nanocrystals (Si-NCs) with multi-modal size distributions. The estimated size distributions are in excellent agreement with TEM and PL results, revealing the reliability of our model.

Surface modifications induced by high fluxes of low energy helium ions.

Several metal surfaces, such as titanium, aluminum and copper, were exposed to high fluxes (in the range of 10(23) m(-2) s(-1)) of low energy (<100 eV) Helium (He) ions. The surfaces were analyzed by scanning electron microscopy and to get a better understanding on morphology changes both top view and cross sectional images were taken. Different surface modifications, such as voids and nano pillars, are observed on these metals. The differences and similarities in the development of surface morphologies are discussed in terms of the material properties and compared with the results of similar experimental studies. The results show that He ions induced void growth and physical sputtering play a significant role in surface modification using high fluxes of low energy He ions.

Nanostructuring of iron surfaces by low-energy helium ions.

The behavior of iron surfaces under helium plasma exposure is investigated as a function of surface temperature, plasma exposure time, and He ion flux. Different surface morphologies are observed for a large process parameter range and discussed in terms of temperature-related surface mechanisms. Surface modification is observed under low-He ion flux (in the range of 10(20) m(-2) s(-1)) irradiation, whereas fiberlike iron nanostructures are formed by exposing the surface to a high flux (in the range of 10(23) m(-2) s(-1)) of low-energy He ions at surface temperatures of 450-700 °C. The effects of surface temperature and plasma exposure time on nanostructures are studied. The results show that surface processing by high-flux low-energy He ion bombardment provides a size-controlled nanostructuring on iron surfaces.

Efficient plasma route to nanostructure materials: case study on the use of m-WO3 for solar water splitting.

One of the main challenges in developing highly efficient nanostructured photoelectrodes is to achieve good control over the desired morphology and good electrical conductivity. We present an efficient plasma-processing technique to form porous structures in tungsten substrates. After an optimized two-step annealling procedure, the mesoporous tungsten transforms into photoactive monoclinic WO3. The excellent control over the feature size and good contact between the crystallites obtained with the plasma technique offers an exciting new synthesis route for nanostructured materials for use in processes such as solar water splitting.