ABSTRACT
Prostate cancer patients with an enlarged prostate and/or excessive pubic arch interference (PAI) are generally considered non-eligible for high-dose-rate (HDR) brachytherapy (BT). Steerable needles have been developed to make these patients eligible again. This study aims to validate the dosimetric impact and performance of steerable needles within the conventional clinical setting. HDR BT treatment plans were generated, needle implantations were performed in a prostate phantom, with prostate volume > 55 cm3 and excessive PAI of 10 mm, and pre- and post-implant dosimetry were compared considering the dosimetric constraints: prostate V100 > 95 % (13.50 Gy), urethra D0.1cm3 < 115 % (15.53 Gy) and rectum D1cm3 < 75 % (10.13 Gy). The inclusion of steerable needles resulted in a notable enhancement of the dose distribution and prostate V100 compared to treatment plans exclusively employing rigid needles to address PAI. Furthermore, the steerable needle plan demonstrated better agreement between pre- and post-implant dosimetry (prostate V100: 96.24 % vs. 93.74 %) compared to the rigid needle plans (79.13 % vs. 72.86 % and 87.70 % vs. 81.76 %), with no major changes in the clinical workflow and no changes in the clinical set-up. The steerable needle approach allows for more flexibility in needle positioning, ensuring a highly conformal dose distribution, and hence, HDR BT is a feasible treatment option again for prostate cancer patients with an enlarged prostate and/or excessive PAI.
Subject(s)
Brachytherapy , Needles , Prostatic Neoplasms , Radiometry , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted , Male , Brachytherapy/instrumentation , Humans , Prostatic Neoplasms/radiotherapy , Phantoms, Imaging , Prostate/radiation effectsABSTRACT
BACKGROUND: The operating room (OR) department is one of the most energy-intensive departments of a hospital. The majority of ORs in the Netherlands have an air-handling installation with an ultra-clean ventilation system. However, not all surgeries require an ultra-clean OR. AIM: To determine the effect of reducing the air change rate on the ventilation effectiveness in ultra-clean ORs. METHODS: Lower air volume ventilation effectiveness (VELv) of conventional ventilation (CV), controlled dilution ventilation (cDV), temperature-controlled airflow (TcAF) and unidirectional airflow (UDAF) systems were evaluated within a 4 × 4 m measuring grid of 1 × 1 m. The VELv was defined as the recovery degree (RD), cleanliness recovery rate (CRR) and air change effectiveness (ACE). FINDINGS: The CV, cDVLv and TcAFLv ventilation systems showed a comparable mixing character in all areas (A, B and AB) when reducing the air change rate to 20/h. Ventilation effectiveness decreased when the air change rate was reduced, with the exception of the ACE. At all points for the UDAF-2Lv and at the centre point (C3) of the TcAFLv, higher RD10Lv and CRRLv were measured when compared with the other examined ventilation systems. CONCLUSIONS: The ventilation effectiveness decreased when an ultra-clean OR with an ultra-clean ventilation air-supply system was switched to an air change rate of 20/h. Reducing the air change rate in the OR from an ultra-clean OR to a generic OR will reduce the recovery degree (RD10) by a factor of 10-100 and the local air change rate (CRR) by between 42% and 81%.
Subject(s)
Operating Rooms , Ventilation , Ventilation/methods , Humans , Netherlands , Air ConditioningABSTRACT
Conformity of tumour volumes and dose plans in prostate brachytherapy (BT) can be constrained by unwanted needle deflections, needle access restrictions and visualisation limitations. This work validates the feasibility of teleoperated robotic control of an active steerable needle using magnetic resonance (MR) for guidance. With this system, perturbations can be counteracted and critical structures can be circumvented to access currently inaccessible areas. The system comprises of (1) a novel steerable needle, (2) the minimally invasive robotics in an MR environment (MIRIAM) system, and (3) the daVinci Research Kit (dVRK). MR scans provide visual feedback to the operator controlling the dVRK. Needle steering is performed along curved trajectories to avoid the urethra towards targets (representing tumour tissue) in a prostate phantom with a targeting error of 1.2 ± 1.0 mm. This work shows the potential clinical applicability of active needle steering for prostate BT with a teleoperated robotic system in an MR environment.
Subject(s)
Brachytherapy , Neoplasms , Robotic Surgical Procedures , Male , Humans , Needles , Prostate/diagnostic imaging , Prostate/surgery , Robotic Surgical Procedures/methods , Magnetic Resonance SpectroscopyABSTRACT
BACKGROUND: Entrainment test methods are described in most European standards and guidelines to determine the protected area for ultra-clean ventilation (UCV) systems. New UCV systems, such as temperature-controlled airflow (TcAF) and controlled dilution ventilation (cDV) systems, claim the whole operating room (OR) to be ultra-clean. However, current test standards were not developed to assess ventilation effectiveness outside the standard protected area. AIM: To assess and compare the ventilation effectiveness of four types of OR ventilation systems in the ultra-clean area using a uniform test grid. METHODS: Ventilation effectiveness of four ventilation systems was evaluated for three different ultra-clean (protected) areas: the standard protected area (A); the area outside the standard protected area (B); and a large protected area (AB). Ventilation effectiveness was assessed using recovery degree (RD), cleanliness recovery rate (CRR) and air change effectiveness (ACE). FINDINGS: RD, CRR and ACE were significantly higher for the unidirectional air flow (UDAF) system compared with the other systems in area A. In area B, the UDAF and cDV systems were comparable for RD and CRR, and the UDAF and conventional ventilation (CV) systems were comparable for ACE. In area AB, the UDAF and cDV systems were comparable for CRR and ACE, but significant differences were found in RD. CONCLUSION: In area A, the ventilation effectiveness of the UDAF system outperformed other ventilation systems. In area B, the cDV system was best, followed by the UDAF, TcAF and CV systems. In area AB, the UDAF system was best, followed by the cDV, TcAF and CV systems.
Subject(s)
Air Microbiology , Operating Rooms , Air Conditioning , Humans , Temperature , Ventilation/methodsABSTRACT
Background: Newly developed techniques for minimally invasive abdominal wall reconstruction (AWR) for complex ventral hernia are continuously evolving. In order to achieve hernia defect closure, the aponeurotic edges of the hernia defect need to be approximated. Currently, surgeons have no way to objectively measure and quantify the traction required to approximate these edges. This study presents minimally invasive tensiometry (MINT), a novel technology for measuring fascial tension, as well as initial experiences and results using it. Methods: The MINT device was designed using rapid prototyping principles. It was designed as an add-on tool for any existing laparoscopic instrument, enabling objective assessment of abdominal wall tension by the use of a manually operated linear spring. Pre-clinical measurements of medialization at 10 and 20 N of tension during AWR were performed on fresh-frozen Post-Mortem Human Specimens (PMHS). Results: Three specimens were included, and a total number of 36 measurements of medialization at three different levels of the abdominal wall were performed under structured and similar circumstances. Median total medialization with 20 Newton (N) of applied tension was 25 mm (mm) cranially, 37.5 mm at the umbilicus and 27.5 mm at the caudal level. The highest rate of medialization was seen at the umbilical level (2.25 mm/N). Conclusion: MINT is a novel non-invasive technique, which allows surgeons to intraoperatively measure fascial tension when performing AWR. The MINT device is easy to use and reproduce. The next step is to start performing clinical measurements applying MINT during AWR.
ABSTRACT
Steerable instruments allow for precise access to deeply-seated targets while sparing sensitive tissues and avoiding anatomical structures. In this study we present a novel omnidirectional steerable instrument for prostate high-dose-rate (HDR) brachytherapy (BT). The instrument utilizes a needle with internal compliant mechanism, which enables distal tip steering through proximal instrument bending while retaining high axial and flexural rigidity. Finite element analysis evaluated the design and the prototype was validated in experiments involving tissue simulants and ex-vivo bovine tissue. Ultrasound (US) images were used to provide visualization and shape-reconstruction of the instrument during the insertions. In the experiments lateral tip steering up to 20 mm was found. Manually controlled active needle tip steering in inhomogeneous tissue simulants and ex-vivo tissue resulted in mean targeting errors of 1.4 mm and 2 mm in 3D position, respectively. The experiments show that steering response of the instrument is history-independent. The results indicate that the endpoint accuracy of the steerable instrument is similar to that of the conventional rigid HDR BT needle while adding the ability to steer along curved paths. Due to the design of the steerable needle sufficient axial and flexural rigidity is preserved to enable puncturing and path control within various heterogeneous tissues. The developed instrument has the potential to overcome problems currently unavoidable with conventional instruments, such as pubic arch interference in HDR BT, without major changes to the clinical workflow.
Subject(s)
Brachytherapy/instrumentation , Finite Element Analysis/statistics & numerical data , Needles/standards , Phantoms, Imaging , Prostate/surgery , Ultrasonography/methods , Animals , Brachytherapy/methods , Cattle , Equipment Design , Humans , Male , Prostate/diagnostic imagingABSTRACT
This study reports on the effects of insertion velocity, needle tip geometry and needle diameter on tissue deformation and maximum insertion force. Moreover, the effect of multiple insertions with the same needle on the maximum insertion force is reported. The tissue deformation and maximum insertion force strongly depend on the insertion velocity and the tip geometry. No correlation was found between the outer diameter and the maximum insertion force for small needles (30G - 32G). The endurance experiments showed no remarkable difference in the maximum insertion force during 100 insertions.
Subject(s)
Mechanical Phenomena , Needles , Gravitation , TongueABSTRACT
Microbrachytherapy with radioactive holmium-166 (166Ho) microspheres (MS) has the potential to be an effective treatment method for brain malignancies. Direct intratumoural delivery of 166Ho-MS and dose coverage of the whole tumour are crucial requirements. However, currently no dedicated instruments for controlled intratumoural delivery exist. This study presents an administration device that facilitates this novel magnetic resonance imaging (MRI) -guided intervention. The bioceramic alumina oxide cannula creates a straight channel for a superelastic nitinol precurved stylet to control spatial deposition of Ho-MS. End-point accuracy of the stylet was measured during insertions in phantoms. Imaging tests were performed in a 3 Tesla MRI-scanner to quantify instrument-induced artefacts. Additionally, the feasibility of non-radioactive holmium-165 (165Ho)-MS delivery with the administration device was evaluated in a brain tumour simulant. Absolute stylet tip error was 0.88 ± 0.61 mm, instrument distortion in MRI depended on needle material and orientation and dose delivery of 165Ho-MS in a brain tumour phantom was possible. This study shows that the administration device can accurately place the stylet for injection of Ho-MS and that visualization can be performed with MRI.
Subject(s)
Holmium , Magnetic Resonance Imaging , Brain/diagnostic imaging , Microspheres , Phantoms, ImagingABSTRACT
PURPOSE: To investigate the performance of two microwave ablation (MWA) systems regarding ablation volume, ablation shape and variability. MATERIALS AND METHODS: In this ex vivo study, the Emprint and Amica MWA systems were used to ablate porcine livers at 4 different settings of time and power (3 and 5 minutes at 60 and 80 Watt). In total, 48 ablations were analysed for ablation size and shape using Vitrea Advanced Visualization software after acquisition of a 7T MRI scan. RESULTS: Emprint ablations were smaller (11,1 vs. 21,1 mL p < 0.001), more spherical (sphericity index of 0.89 vs. 0.59 p < 0.001) and showed less variability than Amica ablations. In both systems, longer ablation time and higher power resulted in significantly larger ablation volumes. CONCLUSION: Emprint ablations were more spherical, and the results showed a lower variability than those of Amica ablations. This comes at the price of smaller ablation volumes.
Subject(s)
Ablation Techniques/methods , Liver/surgery , Animals , Catheter Ablation/methods , Microwaves , Models, Animal , Reproducibility of Results , SwineABSTRACT
BACKGROUND: Surgical Process Modelling (SPM) offers the possibility to automatically gain insight in the surgical workflow, with the potential to improve OR logistics and surgical care. Most studies have focussed on phase recognition modelling of the laparoscopic cholecystectomy, because of its standard and frequent execution. To demonstrate the broad applicability of SPM, more diverse and complex procedures need to be studied. The aim of this study is to investigate the accuracy in which we can recognise and extract surgical phases in laparoscopic hysterectomies (LHs) with inherent variability in procedure time. To show the applicability of the approach, the model was used to automatically predict surgical end-times. METHODS: A dataset of 40 video-recorded LHs was manually annotated for instrument use and divided into ten surgical phases. The use of instruments provided the feature input for building a Random Forest surgical phase recognition model that was trained to automatically recognise surgical phases. Tenfold cross-validation was performed to optimise the model for predicting the surgical end-time throughout the procedure. RESULTS: Average surgery time is 128 ± 27 min. Large variability within specific phases is seen. Overall, the Random Forest model reaches an accuracy of 77% recognising the current phase in the procedure. Six of the phases are predicted accurately over 80% of their duration. When predicting the surgical end-time, on average an error of 16 ± 13 min is reached throughout the procedure. CONCLUSIONS: This study demonstrates an intra-operative approach to recognise surgical phases in 40 laparoscopic hysterectomy cases based on instrument usage data. The model is capable of automatic detection of surgical phases for generation of a solid prediction of the surgical end-time.
Subject(s)
Decision Trees , Hysterectomy/methods , Laparoscopy/methods , Operating Rooms/organization & administration , Workflow , Female , Humans , Operative Time , Video RecordingABSTRACT
Operating Room (OR) scheduling is crucial to allow efficient use of ORs. Currently, the predicted durations of surgical procedures are unreliable and the OR schedulers have to follow the progress of the procedures in order to update the daily planning accordingly. The OR schedulers often acquire the needed information through verbal communication with the OR staff, which causes undesired interruptions of the surgical process. The aim of this study was to develop a system that predicts in real-time the remaining procedure duration and to test this prediction system for reliability and usability in an OR. The prediction system was based on the activation pattern of one single piece of equipment, the electrosurgical device. The prediction system was tested during 21 laparoscopic cholecystectomies, in which the activation of the electrosurgical device was recorded and processed in real-time using pattern recognition methods. The remaining surgical procedure duration was estimated and the optimal timing to prepare the next patient for surgery was communicated to the OR staff. The mean absolute error was smaller for the prediction system (14 min) than for the OR staff (19 min). The OR staff doubted whether the prediction system could take all relevant factors into account but were positive about its potential to shorten waiting times for patients. The prediction system is a promising tool to automatically and objectively predict the remaining procedure duration, and thereby achieve optimal OR scheduling and streamline the patient flow from the nursing department to the OR.
Subject(s)
Appointments and Schedules , Cholecystectomy, Laparoscopic/statistics & numerical data , Efficiency, Organizational , Operating Rooms/organization & administration , Personnel Staffing and Scheduling/organization & administration , Humans , Reproducibility of Results , Time FactorsABSTRACT
New surgical techniques and technology have simplified laparoscopic hysterectomy and have enhanced the safety of this procedure. However, the surgical colpotomy step has not been addressed. This study evaluates the surgical colpotomy step in laparoscopic hysterectomy with respect to difficulty and duration. Furthermore, it proposes an alternative route that may simplify this step in laparoscopic hysterectomy. A structured interview, a prospective cohort study, and a problem analysis were performed regarding experienced difficulty and duration of surgical colpotomy in laparoscopic hysterectomy. Sixteen experts in minimally invasive gynecologic surgery from 12 hospitals participated in the structured interview using a 5-point Likert scale. The colpotomy in LH received the highest scores for complexity (2.8 ± 1.2), compared to AH and VH. Colpotomy in LH was estimated as more difficult than in AH (2.8 vs 1.4, p < .001). In the cohort study, 107 patients undergoing LH were included. Sixteen percent of the total procedure time was spent on colpotomy (SD 7.8 %). BMI was positively correlated with colpotomy time, even after correcting for longer operation time. No relation was found between colpotomy time and blood loss or uterine weight. The surgical colpotomy step in laparoscopic hysterectomy should be simplified as this study demonstrates that it is time consuming and is considered to be more difficult than in other hysterectomy procedures. A vaginal approach to the colpotomy is proposed to achieve this simplification.
ABSTRACT
BACKGROUND: The aim of this study was to examine the influence of training under direct vision prior to training with indirect vision on the learning curve of the laparoscopic suture task. METHODS: Novices were randomized in two groups. Group 1 performed three suturing tasks in a transparent laparoscopic box trainer under direct vision followed by three suturing tasks in a standard non-transparent laparoscopic box trainer equipped with a 0° laparoscope. Group 2 performed six suturing tasks in a standard laparoscopic box trainer. Performance time, motion analysis parameters (economy of movements) and interaction force parameters (tissue handling) were measured. Participants completed a questionnaire assessing: self-perceived dexterity before and after the training, their experienced frustration and the difficulty of the training. RESULTS: A total of 34 participants were included, one was excluded because of incomplete training. Group 1 used significantly less time to complete the total of six tasks (27 %). At the end of the training, there were no differences in motion or force parameters between the two groups. Group 2 rated their self-perceived dexterity after the training significantly lower than before the training and also reported significantly higher levels of frustration compared to group 1. Both groups rated the difficulty of the training similar. CONCLUSION: Novices benefit from starting their training of difficult basic laparoscopic skills, e.g., suturing, in a transparent box trainer without camera. It takes less time to complete the tasks, and they get less frustrated by the training with the same results on their economy of movements and tissue handling skills.
Subject(s)
Laparoscopy/education , Learning Curve , Suture Techniques/education , Adult , Female , Humans , Male , Students, Medical , Time and Motion Studies , Young AdultABSTRACT
BACKGROUND: A study was performed to determine differences in applied interaction force between conventional open surgery and laparoscopic surgery during suturing in a non-clinical setting. METHODS: In a laparoscopic box trainer set-up, experts performed two intracorporeal and two extracorporeal sutures on an artificial skin model. They also performed two instrument-tie knots and two one-hand square knots in a similar conventional training set-up. The force exerted on the artificial tissue (mean force, mean non-zero, maximum, and volume) and the time to complete a task were measured. For analysis purposes, sutures are divided in a needle driving phase (Phase 1) and knot-tying phase (Phase 2). RESULTS: Phase 1: Force values in laparoscopic suturing are significantly higher than in conventional suturing, except for the force volume during extracorporeal suturing versus the one-hand square knot. Phase 2: The mean force non-zero and maximum force during the intracorporeal knot are significantly higher than during the instrument-tie knot. The mean and maximum force during the extracorporeal knot are significantly higher than during the one-hand square knot. Furthermore, laparoscopic suturing takes longer time than conventional suturing. CONCLUSION: Expert surgeons apply significantly higher force during laparoscopic surgery compared to conventional surgery even though the same strategy is used. Aspects such as the limited visual and haptic feedback, and movement possibilities hamper surgeons' ability to assess the applied interaction force. Therefore it can be useful to provide additional force feedback about the applied interaction force during training in non-clinical settings.
Subject(s)
Laparoscopy/methods , Suture Techniques , Humans , Laparotomy/methods , Models, Anatomic , Needles , Surgeons , SuturesABSTRACT
Over the years, the design of the tip of available catheters and guidewires has evolved into various shapes whose geometry is mostly based on common sense and experimentation. However, while the tip shape of conventional instruments can be easily modified and tested, the length of the tip of a deflectable guidewire cannot. Hence, other approaches are necessary in order to determine the proper dimensions of original instruments. In this paper, we formulate the length of the different parts of the deflectable tip of a guidewire as an optimization problem with the objective to obtain a design that is suitable for cannulating several target bifurcations of the peripheral vasculature. A direct relationship between the design of the deflectable tip and the geometry of the target bifurcations was found and the optimal dimension of the tip of the instrument was computed. Following the length specifications defined by the optimization, a new prototype was assembled, and evaluated. The deflectable guidewire could successfully cannulate most of the pre-selected branches except those bifurcations with an angle α>70°. The latter limitation could be ascribed to the mechanical properties of the instrument.
Subject(s)
Catheterization/instrumentation , Endovascular Procedures/instrumentation , Blood Vessels/anatomy & histology , Catheters , Equipment Design , HumansABSTRACT
Information technology, such as real-time location (RTL) systems using Radio Frequency IDentification (RFID) may contribute to overcome patient safety issues and high costs in healthcare. The aim of this work is to study if a RFID specific Participatory Design (PD) approach supports the design and the implementation of RTL systems in the Operating Room (OR). A RFID specific PD approach was used to design and implement two RFID based modules. The Device Module monitors the safety status of OR devices and the Patient Module tracks the patients' locations during their hospital stay. The PD principles 'multidisciplinary team', 'participation users (active involvement)' and 'early adopters' were used to include users from the RFID company, the university and the hospital. The design and implementation process consisted of two 'structured cycles' ('iterations'). The effectiveness of this approach was assessed by the acceptance in terms of level of use, continuity of the project and purchase. The Device Module included eight strategic and twelve tactical actions and the Patient Module included six strategic and twelve tactical actions. Both modules are now used on a daily basis and are purchased by the hospitals for continued use. The RFID specific PD approach was effective in guiding and supporting the design and implementation process of RFID technology in the OR. The multidisciplinary teams and their active participation provided insights in the social and the organizational context of the hospitals making it possible to better fit the technology to the hospitals' (future) needs.
Subject(s)
Operating Rooms/organization & administration , Patient Safety , Radio Frequency Identification Device , Communication , Computer Systems , Confidentiality , Humans , Inservice Training , Leadership , Patient Care Team , Time FactorsABSTRACT
BACKGROUND: Force feedback might improve surgical performance during minimally invasive surgery. This study sought to determine whether training with force feedback shortened the tissue-handling learning curve, and examined the influence of real-time visual feedback compared with postprocessing feedback. METHODS: Medical students without experience of minimally invasive surgery were randomized into three groups: real-time force feedback, postprocessing force feedback and no force feedback (control). All performed eight suturing tasks consecutively, of which the first and eighth were the premeasurement and postmeasurement tasks respectively (no feedback). Depending on randomization, either form of feedback was given during the second to seventh task. Time, mean force non-zero and maximum force were measured with a force sensor. Results of the groups were compared with one-way ANOVA, and intragroup improvement using a paired-samples t test. RESULTS: A total of 72 students took part. Both intervention groups used significantly lower interaction forces than the control group during the knot-tying phase of the postmeasurement task and improved their interaction forces significantly during the knot-tying phase. The form of feedback did not influence its effectiveness. CONCLUSION: The tissue-handling skills of medical students improved significantly when they were given force feedback of their performance. This effect was seen mainly during the knot-tying phase of the suturing task.