High dissolved oxygen tension triggers outer membrane vesicle formation by Neisseria meningitidis.

BACKGROUND: Outer membrane vesicles (OMVs) are nanoparticles released by Gram-negative bacteria and can be used as vaccines. Often, detergents are used to promote release of OMVs and to remove the toxic lipopolysaccharides. Lipopolysaccharides can be detoxified by genetic modification such that vesicles spontaneously produced by bacteria can be directly used as vaccines. The use of spontaneous OMVs has the advantage that no separate extraction step is required in the purification process. However, the productivity of spontaneous OMVs by bacteria at optimal growth conditions is low. One of many methods for increasing OMV formation is to reduce the linkage of the outer membrane to the peptidoglycan layer by knocking out the rmpM gene. A previous study showed that for Neisseria meningitidis this resulted in release of more OMVs. Furthermore, cysteine depletion was found to trigger OMV release and at the same time cause reduced growth and oxidative stress responses. Here we study the effect of growth rate and oxidative stress on OMV release. RESULTS: First, we identified using chemostat and accelerostat cultures of N. meningitidis that increasing the growth rate from 0.03 to 0.18 h-1 has a limited effect on OMV productivity. Thus, we hypothesized that oxidative stress is the trigger for OMV release and that oxidative stress can be introduced directly by increasing the dissolved oxygen tension of bacterial cultures. Slowly increasing oxygen concentrations in a N. meningitidis changestat showed that an increase from 30 to 150% air saturation improved OMV productivity four-fold. Batch cultures controlled at 100% air saturation increased OMV productivity three-fold over batch cultures controlled at 30% air saturation. CONCLUSION: Increased dissolved oxygen tension induces the release of outer membrane vesicles in N. meningitidis cultures. Since oxygen concentration is a well-controlled process parameter of bacterial cultures, this trigger can be applied as a convenient process parameter to induce OMV release in bacterial cultures. Improved productivity of OMVs not only improves the production costs of OMVs as vaccines, it also facilitates the use of OMVs as adjuvants, enzyme carriers, or cell-specific drug delivery vehicles.

Proteome Analysis Is a Valuable Tool to Monitor Antigen Expression during Upstream Processing of Whole-Cell Pertussis Vaccines.

Physicochemical and immunochemical assays were applied to substantiate the relation between upstream processing and the quality of whole-cell pertussis vaccines. Bordetella pertussis bacteria were cultured on a chemically defined medium using a continuous cultivation process in stirred tank reactors to obtain uniform protein expression. Continuous culture favors the consistent production of proteins known as virulence factors. Magnesium sulfate was added during the steady state of the culture in order to diminish the expression of virulence proteins. Changes in gene expression and antigen composition were measured by microarrays, mass spectrometry and ELISA. Transcriptome and proteome data revealed high similarity between the biological triplicates demonstrating consistent cultivation of B. pertussis. The addition of magnesium sulfate resulted in an instant downregulation of the virulence genes in B. pertussis, but a gradual decrease of virulence proteins. The quantity of virulence proteins concurred highly with the potency of the corresponding whole-cell pertussis vaccines, which were determined by the Kendrick test. In conclusion, proteome analysis provided detailed information on the composition and proportion of virulence proteins present in the whole-cell preparations of B. pertussis. Moreover, proteome analysis is a valuable method to monitor the production process of whole-cell biomass and predict the product quality of whole-cell pertussis vaccines.

HPAEC-PAD quantification of Haemophilus influenzae type b polysaccharide in upstream and downstream samples.

Due to the rapidly increasing introduction of Haemophilus influenzae type b (Hib) and other conjugate vaccines worldwide during the last decade, reliable and robust analytical methods are needed for the quantitative monitoring of intermediate samples generated during fermentation (upstream processing, USP) and purification (downstream processing, DSP) of polysaccharide vaccine components. This study describes the quantitative characterization of in-process control (IPC) samples generated during the fermentation and purification of the capsular polysaccharide (CPS), polyribosyl-ribitol-phosphate (PRP), derived from Hib. Reliable quantitative methods are necessary for all stages of production; otherwise accurate process monitoring and validation is not possible. Prior to the availability of high performance anion exchange chromatography methods, this polysaccharide was predominantly quantified either with immunochemical methods, or with the colorimetric orcinol method, which shows interference from fermentation medium components and reagents used during purification. Next to an improved high performance anion exchange chromatography-pulsed amperometric detection (HPAEC-PAD) method, using a modified gradient elution, both the orcinol assay and high performance size exclusion chromatography (HPSEC) analyses were evaluated. For DSP samples, it was found that the correlation between the results obtained by HPAEC-PAD specific quantification of the PRP monomeric repeat unit released by alkaline hydrolysis, and those from the orcinol method was high (R(2)=0.8762), and that it was lower between HPAEC-PAD and HPSEC results. Additionally, HPSEC analysis of USP samples yielded surprisingly comparable results to those obtained by HPAEC-PAD. In the early part of the fermentation, medium components interfered with the different types of analysis, but quantitative HPSEC data could still be obtained, although lacking the specificity of the HPAEC-PAD method. Thus, the HPAEC-PAD method has the advantage of giving a specific response compared to the orcinol assay and HPSEC, and does not show interference from various components that can be present in intermediate and purified PRP samples.

Physicochemical and immunochemical assays for monitoring consistent production of tetanus toxoid.

The detoxification of tetanus toxin by formaldehyde is a crucial step in the production of tetanus toxoid. The inactivation results in chemically modified proteins and it determines largely the ultimate efficacy and safety of the vaccine. Currently, the quality of tetanus toxoid lots is evaluated in potency and safety tests performed in animals. As a possible alternative, this article describes a panel of in vitro methods, which provides detailed information about the quality of tetanus toxoid. Ten experimental lots of tetanus toxoid were prepared using increasing concentrations of formaldehyde and glycine to obtain tetanus toxoids having differences in antigenicity, immunogenicity, residual toxicity and protein structure. The structural properties of each individual toxoid were determined using immunochemical and physicochemical methods, including biosensor analysis, ELISA, circular dichroism, TNBS assay, differential scanning calorimetry, fluorescence and SDS-PAGE. The quality of a tetanus toxoid lot can be assessed by these set of analytical techniques. Based on antigenicity, immunogenicity and residual toxicity data, criteria are formulated that tetanus toxoids lot have to meet in order to have a high quality. The in vitro methods are a valuable selection of techniques for monitoring consistency of production of tetanus toxoid, especially for the detoxification process of tetanus toxin.

Cysteine depletion causes oxidative stress and triggers outer membrane vesicle release by Neisseria meningitidis; implications for vaccine development.

Outer membrane vesicles (OMV) contain immunogenic proteins and contribute to in vivo survival and virulence of bacterial pathogens. The first OMV vaccines successfully stopped Neisseria meningitidis serogroup B outbreaks but required detergent-extraction for endotoxin removal. Current vaccines use attenuated endotoxin, to preserve immunological properties and allow a detergent-free process. The preferred process is based on spontaneously released OMV (sOMV), which are most similar to in vivo vesicles and easier to purify. The release mechanism however is poorly understood resulting in low yield. This study with N. meningitidis demonstrates that an external stimulus, cysteine depletion, can trigger growth arrest and sOMV release in sufficient quantities for vaccine production (±1500 human doses per liter cultivation). Transcriptome analysis suggests that cysteine depletion impairs iron-sulfur protein assembly and causes oxidative stress. Involvement of oxidative stress is confirmed by showing that addition of reactive oxygen species during cysteine-rich growth also triggers vesiculation. The sOMV in this study are similar to vesicles from natural infection, therefore cysteine-dependent vesiculation is likely to be relevant for the in vivo pathogenesis of N. meningitidis.

Identification and optimization of critical process parameters for the production of NOMV vaccine against Neisseria meningitidis.

Outer membrane vesicles (OMV) are used as a vaccine against Neisseria meningitidis serogroup B and are traditionally produced with detergent-extraction to remove toxic lipopolysaccharide. Engineered strains with attenuated lipopolysaccharide allowed the use of native vesicles (NOMV) with improved stability and immunogenicity. In the NOMV production process detergents are omitted and vesicle release is stimulated with EDTA extraction (a chelating agent) to enable a higher yield. Many process parameters may change the EDTA extraction efficiency, but it is unknown what the optimal ranges for these parameters are in terms of quality. The present study systematically optimized EDTA extraction and was representative for production at large-scale. Two critical process parameters were identified, harvest point of the cultivation (harvest) and pH of the extraction buffer (pH), which significantly affected yield (7-fold) and bacterial lysis (35-fold). The other quality attributes remained unchanged. Optimization of harvest and pH revealed that the desired low bacterial lysis coincided with intermediate but sufficient yield. High functional immunogenicity and low toxicity of the optimized vaccine were also confirmed. The EDTA extraction is therefore a robust process step which produces high quality OMV if harvest and pH are controlled accurately.

Scaling-up vaccine production: implementation aspects of a biomass growth observer and controller.

This study considers two aspects of the implementation of a biomass growth observer and specific growth rate controller in scale-up from small- to pilot-scale bioreactors towards a feasible bulk production process for whole-cell vaccine against whooping cough. The first is the calculation of the oxygen uptake rate, the starting point for online monitoring and control of biomass growth, taking into account the dynamics in the gas-phase. Mixing effects and delays are caused by amongst others the headspace and tubing to the analyzer. These gas phase dynamics are modelled using knowledge of the system in order to reconstruct oxygen consumption. The second aspect is to evaluate performance of the monitoring and control system with the required modifications of the oxygen consumption calculation on pilot-scale. In pilot-scale fed-batch cultivation good monitoring and control performance is obtained enabling a doubled concentration of bulk vaccine compared to standard batch production.

Improving the cellular pertussis vaccine: increased potency and consistency.

Although Europe, Canada and the US have switched from cellular to acellular pertussis vaccines, most developing countries will continue to use the more cost effective cellular vaccine. Consistency of production however is the typical problem inherent to cellular vaccines. Optimising the production process of cellular pertussis bulk suspensions using product potency as a measure is not possible, since the mandatory animal test to measure potency has little discriminatory power. To circumvent this problem, this study focussed on measuring process parameters related to consistency and potency instead, even though the extent of those relationships could not be quantified. Critical evaluation and modification of individual process steps lead to 2 optimised production processes, NVP-96 and NVP-THIJS. These were compared to the original NVP production process in terms of antigen and biomass content, potency, toxicity and immunogenicity in mice. The batch to batch variation for both optimised products was clearly less than the original product for all parameters tested. The biomass content of the NVP-THIJS product was 15% lower than that of the NVP-96 product, while the immunogenicity in mice was twofold to threefold higher. The stability of the NVP-THIJS product remained higher than the NVP-96 product over a period of 2 years, while the decline of the potency of both suspensions was comparable.

Fed-batch cultivation of Bordetella pertussis: metabolism and Pertussis Toxin production.

The production of acellular pertussis in comparison with whole cell pertussis vaccines demands 5-25 times the amount of Bordetella pertussis' virulence factors, such as Pertussis Toxin (PT), to produce the same number of vaccine doses. An increase in the volumetric productivity by employing fed-batch rather than the currently used batch cultivations of B. pertussis could reduce the cost price of acellular pertussis vaccines. This study defined the conditions that enable fed-batch cultivations at high specific PT production. A solution containing lactate and glutamate was fed to the cultures at various rates. The feed rate and whether or not the fed substrates were completely consumed, significantly influenced cellular metabolism. If lactate was detectable in the culture broth while glutamate was not, poly-hydroxy-butyrate (PHB) was formed. Any PHB present was metabolized when glutamate became detectable again in the culture liquid. At higher lactate and glutamate concentrations, free fatty acids were produced. Though toxic, free fatty acids were not the reason the cultures stopped growing. By choosing appropriate conditions, a cell density of 6.5 g/L dry weight was reached, i.e. a 7-fold increase compared to batch culture. The metabolic mechanisms behind the formation of PHB and fatty acids are discussed, as well as how to increase the cell density further. The PT production stopped at 12 mg/L, well before growth stopped, indicating that regulatory mechanisms of PT production may be involved.

Effect of relevant culture parameters on Pertussis Toxin expression by Bordetella pertussis.

Whooping cough vaccines are produced using different ranges of cultivation conditions and medium compositions, which are known to influence growth rate, virulence factor production and degradation, as well as the virulence factors' association to the cell. This study quantifies the impact of individual parameters on Pertussis Toxin (PT) production, using an optimized chemically defined medium as starting point, rather than a complex medium. A number of chemicals that are identified affect both growth rate and virulence factor production, which occur at similar levels in various commonly used production media. Also, degradation by proteolytic activity is shown to be an important parameter to monitor, since it significantly affects the PT yield. Low sodium concentrations, i.e. 50-75 mM rather than the conventional 100-140 mM, significantly increase the growth rate of the organism, the final optical density, as well as the association of PT to the cells. The absolute amount of biomass produced measured as dry weight, is similar for all sodium concentrations tested, contrary to earlier work. While it is known that high iron concentrations inhibit virulence factor production, it is shown here that iron-limited growth results in very high specific PT production. This finding may be used to produce a whole-cell vaccine with little biomass per dose, reducing whole-cell vaccine toxicity. The Bordetella pertussis strain 509 used here produces 30% more PT at 34 than at 37 degrees C, a commonly used cultivation temperature. The data in this study show that existing production processes for cellular and acellular vaccines can in principle be optimised considerably by taking simple measures.