Capillary electrophoresis with on-chip four-electrode capacitively coupled conductivity detection for application in bioanalysis.

Microchip capillary electrophoresis (CE) with integrated four-electrode capacitively coupled conductivity detection is presented. Conductivity detection is a universal detection technique that is relatively independent on the detection pathlength and, especially important for chip-based analysis, is compatible with miniaturization and on-chip integration. The glass microchip structure consists of a 6 cm etched channel (20 microm x 70 microm cross section) with silicon nitride covered walls. In the channel, a 30 nm thick silicon carbide layer covers the electrodes to enable capacitive coupling with the liquid inside the channel as well as to prevent interference of the applied separation field. The detector response was found to be linear over the concentration range from 20 microM up to 2 mM. Detection limits were at the low microM level. Separation of two short peptides with a pI of respectively 5.38 and 4.87 at the 1 mM level demonstrates the applicability for biochemical analysis. At a relatively low separation field strength (50 V/cm) plate numbers in the order of 3500 were achieved. Results obtained with the microdevice compared well with those obtained in a bench scale CE instrument using UV detection under similar conditions.

New approaches for fabrication of microfluidic capillary electrophoresis devices with on-chip conductivity detection.

In practice, microfluidic systems are based on the principles of capillary electrophoresis (CE), for a large part due to the simplicity of electroosmotic pumping. In this contribution, a universal conductivity detector is presented that allows detection of charged species down to the microM level. Additionally, powderblasting is presented as a novel technique for direct etching of microfluidic networks. This method allows creation of features down to 50 microm with a total processing time (design to device) of less than one day. The performance of powderblasted devices with integrated conductivity detection is illustrated by the separation of lithium, sodium, and potassium ions and that of fumaric, malic, and citric acid.