Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Longevity of acrylic and cobalt-chromium removable partial dentures-A ten-year retrospective survival analysis of 1246 denture-wearing patients.

OBJECTIVES: to assess the survival rates of removable partial dentures (RPDs) and identify factors impacting their longevity. METHODS: electronic health records were retrieved of patients aged ≥18 who received RPDs between 2010 - 2021 with a follow-up of ≥ three months. Data extracted included demographics, medical history, dental charting, periodontal screening and recording scores, prostheses details and related interventions, including new dentures/denture remakes, and maintenance. Multivariate Mixed-Effect Cox regression was performed to identify potential RPD survival risk factors. Reduced model selection was reached using a backward step-down by comparing the performance of these multivariable models using the ANOVA test. RESULTS: 1893 RPDs from 1246 patients were included, with a median follow-up of 21.8 months (range from 3 to 131.3 months). Three hundred and twelve patients received a maxillary RPD, 460 received a mandibular RPD, and the remaining 474 patients received both maxillary and mandibular RPDs. Metal-based RPDs had a median survival of 73 months (95%CI: 70 - 82) versus 45 months (95% CI: 37-67) for acrylic ones. Multivariable mixed effects Cox model showed that the lifespans of RPDs were longer amongst patients receiving more maintenance care within three months [Hazards Ratio (HR)=0.89 (0.83, 0.96)] and after three months [HR=0.53 (0.46, 0.61)] of denture delivery, patients wearing both maxillary and mandibular RPDs [HR=0.67 (0.52, 0.87)], and patients receiving metal-based RPDs [HR=0.31 (0.23, 0.42)]. CONCLUSIONS: Metal-based dentures, dual arch restoration, and increased maintenance positively impact the survival of RPDs. CLINICAL SIGNIFICANCE: Adapting consent and warranty practices is advised to reflect RPD performance variations.

Factors associated with toothbrushing performance among children: An observational cohort study.

BACKGROUND: Effective removal of dental plaque is essential factor for prevention of caries, gingival, and periodontal diseases in children and adults. AIM: To evaluate factors associated with improving toothbrushing performance (TB-P) among children. DESIGN: An observational cohort study analyzed all paediatric patients receiving regular examinations in a single dental clinic between 2009 and 2017 and regularly brushing their teeth with a triple-headed toothbrush (TH-TB). At every periodic follow-up, the TB-P of the child/parent was evaluated using the TB-P Skill Index (TB-PS-I); that is, did the child reach all five teeth segments within each arch and did he/she perform 10 back-and-forth stocks in each segment. When not optimal, they received instructions for improving TB-P and subsequently were asked to re-demonstrate. TB-PS-I was calculated and analyzed for correlation with other explanatory variables. RESULTS: A total of 1737 children with 7399 follow-up appointments were analyzed. Older age, female gender, higher number of follow-up appointments, and compliance with twice-daily toothbrushing significantly improved TB-P. The most typical mistakes in their performance were not reaching the canine segments and not performing enough strokes in each segment. Instructions given after imperfect TB-P significantly improved the TB-P. The magnitude of improvement, however, did not correlate with the performers' age, gender, or the number of follow-up visits. CONCLUSIONS: A significant percentage of children >8 years did not perform optimal toothbrushing even when using TH-TB.

Comparison of digital study model superimposition methods using implant-supported crowns and best-fit algorithms.

INTRODUCTION: Research regarding orthodontic changes using the superimposition of digital study models (DSMs) is commonplace. Information regarding the accuracy of data processing by superimposition software is limited. The study aimed to compare different methods of superimposing DSMs using implant-supported crowns (ISC) as a stable reference structure. METHODS: DSMs containing ISCs were sourced from a database of patients treated with clear aligner therapy. The DSM representing the planned treatment outcome was superimposed on the pretreatment DSM. Three tooth points were selected for comparison on the contralateral side of each ISC. Differences in Cartesian coordinates for each tooth point for each arch superimposition method, used by the Geomagic Control X (3D systems, Rock Hill, NC) software system, were recorded. Paired t tests for the reference standard superimposition method best-fit high-resolution using the entire dental arch compared with initial, best-fit low-resolution, and best-fit high-resolution using the ISC only were calculated. RESULTS: The DSMs of 54 dental arches containing ISCs were evaluated. All mean differences for displacements of selected points on the contralateral side to the ISC in the 3 Cartesian planes were <0.05 mm (P <0.05) and below the threshold of clinical significance. In addition, the standard superimposition techniques (initial, best-fit low-resolution, and best-fit high-resolution) resulted in nonstatistically significant and nonclinically significant differences in the position of the ISC. CONCLUSIONS: Researchers can be confident that the described superimposition methodologies, with and without ISCs as a stable reference structure, are a valid method for accurately assessing most intraarch dental changes.

Implementation of Patient-Individualized 3D-Printed Models in Undergraduate Students' Education for Various Prosthetic Treatments: A Cross-Sectional Survey Study.

BACKGROUND: Due to rapid changes in dental practice, digital technologies have become prominent in undergraduate dental education at German universities in recent years. This shift has prompted a re-evaluation of content as well as teaching methods, particularly in courses where students are prepared for patient treatment. Traditional training on standardized models with resin teeth cannot cover the complexity of individual dental arch configuration encountered in patient situations. This study explores the use of 3D printing technology to create individualized models for prosthetic treatment simulations, aiming to evaluate students' feedback towards their experience with this training setting. METHODS: First, the study describes the design and fabrication of individualized models with exchangeable teeth based on intraoral scans, mounted on connected plates with distance holders that can be fixed to standard phantom heads. Second, students provided feedback through a questionnaire, assessing various aspects such as the effectiveness of the 3D-printed models compared to traditional frasaco models for preparation exercises. RESULTS: The results indicated that the design of the realized models was feasible for preparation training (question no. 4: 93% positive rating) and showed positive perceptions of the 3D-printed models, with students finding them effective for preparation exercises and beneficial in bridging the gap between simulation and real patient situations (question no. 6: 69% positive rating). CONCLUSIONS: The study suggests that 3D printing technology offers a valuable tool in dental education, providing realistic and patient-specific scenarios for students to enhance their skills and readiness for clinical practice. Further improvements in material properties in hand with cost-effective approaches are essential for widespread implementation.

Visualisation of dental anatomy in CBCT scans: Part 1.

To the trained eye, every tooth is different. An in-depth understanding of dental anatomy in cross-sectional images is a fundamental basic skill required when interpreting cone beam computed tomography (CBCT) scans. The conventional orthogonal planes of axial, coronal, and sagittal are not always the best planes in which to assess teeth because every tooth is at a slightly different angle to all these planes. In this chapter, the author demonstrates the characteristic anatomy of upper and lower incisors, canines, premolars, and molars in longitudinal and transverse sections, using carefully uprighted images. Some of these teeth are also shown in transverse section at various levels in the crown and root. The chronology of permanent teeth is shown. Developing teeth are discussed and incremental growth lines are mentioned.The author describes three well-known dental notation systems (Palmer, FDI, hybrid).There are four videos accompanying this chapter, including one fascinating video showing a scroll-through of all the cross-arch sections of a synthetic panoramic (curved multiplanar reconstruction) image that includes all the upper and lower teeth in a 16-year-old.

Three-Dimensional Anthropometric Analysis of the Effect of Lip Reconstructive Surgery on Children with Cleft Lip and Palate at Three Different Times.

OBJECTIVES: This investigation aimed to assess the optimal timing for lip repair in children with cleft lip and palate via 3D anthropometric analysis to evaluate their maxillofacial structures. METHODS: The sample comprised 252 digitized dental models, divided into groups according to the following timing of lip repair: G1 (n = 50): 3 months; G2 (n = 50): 5 and 6 months; G3 (n = 26): 8 and 10 months. Models were evaluated at two-time points: T1: before lip repair; T2: at 5 years of age. Linear measurements, area, and Atack index were analyzed. RESULTS: At T1, the intergroup analysis revealed that G1 had statistically significant lower means of I-C', I-C, C-C', and the sum of the segment areas compared to G2 (p = 0.0140, p = 0.0082, p = 0.0004, p < 0.0001, respectively). In addition, there was a statistically significant difference when comparing the cleft area between G2 and G3 (p = 0.0346). At T2, the intergroup analysis revealed that G1 presented a statistically significant mean I-C' compared to G3 (p = 0.0461). In the I-CC' length analysis, G1 and G3 showed higher means when compared to G2 (p = 0.0039). The I-T' measurement was statistically higher in G1 than in G2 (p = 0.0251). In the intergroup growth rate analysis, G1 and G2 showed statistically significant differences in the I-C' measurement compared to G3 (p = 0.0003). In the analysis of the Atack index, there was a statistically significant difference between G1 and the other sample sets (p < 0.0001). CONCLUSION: Children who underwent surgery later showed better results in terms of the growth and development of the dental arches.

Evaluation of treatment outcomes with passive presurgical infant orthopaedics in patients with non-syndromic cleft lip and or palate: A systematic review conducted according to PRISMA guidelines and the Cochrane Handbook for Systematic Reviews of Interventions.

AIM: The primary goal of the present comprehensive systematic review is to assess the treatment results attained through PSIO in individuals with NSCLP, as well as to explore its effectiveness. This will be accomplished by examining a range of existing published studies that focus on patient groups who have undergone PPIO. MATERIALS: A comprehensive search strategy was devised by a single author for each database without language restrictions. The databases searched were PubMed, Cochrane library Google Scholar, Web of Science and Scopus. The search period was limited to the years 2001 to 2023. Duration and study design filter was used. Furthermore, conference proceedings, abstracts, and reference lists of relevant studies were sought to obtain additional records. CONCLUSION: The examined protocols for passive presurgical infant orthopaedics (PPIO) in individuals with CLP typically did not reveal notable treatment outcomes when compared to a lack of treatment across a range of domains. These domains encompass feeding patterns, facial aesthetics, maxillary dentoalveolar factors, cephalometric measurements, speech and language-related aspects, dental arch alignments, economic assessments, as well as occurrences of adverse effects or complications associated with applied appliances or procedures.

3D-printed shell complete dentures as a diagnostic aid for implant planning and fabricating interim restorations for complete arch rehabilitations: A case series.

3D-printed shell complete dentures generated from a scan of the patient's existing prostheses can simplify and expedite the surgical planning and interim restoration design for complete arch rehabilitations. Three patients were rehabilitated with endosteal implants, and interim restorations were generated from the contours of the 3D-printed shell complete dentures used as diagnostic aids. This case series report presents the recommended protocol and its clinical progression, in addition to clinical and radiographic images of the treatment outcomes.

Reliability of predictive models based on the mesiodistal and buccolingual diameters of permanent canine teeth for sex estimation in forensic contexts: A systematic review and meta-analysis.

This study aimed to assess the reliability of predictive models for sex estimation based on permanent canine size. A systematic literature review was performed by following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA). Six electronic databases were searched as the primary source of information. As a secondary source of information, a manual search was performed to identify additional relevant studies not captured in the initial search. After assessing the methodological quality and risk of bias with the Joanna Briggs Institute Critical Appraisal Tools for Systematic Reviews, the data were subjected to statistical tests for a meta-analysis of diagnostic test accuracy and Higgin's I2 statistic to evaluate the heterogeneity between the eligible studies. The systematic search resulted in 21 studies for qualitative synthesis, and 13 of them were selected for quantitative analysis. The analysis of 25 univariate predictive models showed an estimated sensitivity of 77.2 % and specificity of 67.1 %. Meta-regression analyses were performed for dental arch, the type of diameter and dental region outcomes for these univariate predictive models. Dental arch (p = 0.029) and the dental region of measurement (p = 0.001) were significant modifiers. The analysis of 25 multivariate predictive models showed an estimated sensitivity of 82.6 % and specificity of 70.1 %. There were significant methodological limitations and substantial heterogeneity among the included studies. Based on the results, there is insufficient high-quality scientific evidence to support the safe use of predictive models based on permanent canine measurements as the exclusive method for sex estimation in forensic settings.

Impact of vertical alveoloplasty on changes in keratinized mucosa width following full-arch immediate implant placement and rehabilitations: A prospective case series.

PURPOSE: This prospective case series aimed to investigate the effect of vertical alveoloplasty on the changes in keratinized mucosa width (KMW) following full-arch immediate implant placement and rehabilitation. MATERIALS AND METHODS: A total of 17 potential edentulous patients were enrolled and received implant placement and full-arch implant-supported immediate rehabilitations. The main outcome was to analyze the effect of vertical alveoloplasty on the changes in KMW. The amount of vertical alveoloplasty during implant surgery as well as the changes in KMW at buccal aspects from the day of surgery to 6 months post-surgery were recorded on the implant-level using a periodontal probe. The secondary outcome was to analyze the other possible factors that affected the changes in KMW. The included factors were the initial KMW, the distribution of implants in the maxilla and mandible, the distribution of implants in the anterior and posterior regions, the distribution of implants in extraction sockets and healed ridges, and gender. Mann-Whitney non-parametric tests and multiple linear regression adjusted by generalized estimating equations (GEE) were used to statistically analyze the data. RESULTS: A total of 121 implant positions were analyzed. The KMW was 4.1± 2.0 mm on the day of the surgery and 4.1± 1.7 mm 6 months post-surgery. The mean changes in KMW following 6 months were -0.1± 1.6 mm (p = 0.824). From the results of GEE, the vertical amount of alveoloplasty had no significant effect on changes in KMW. Both initial KMW and the distribution of implants in the anterior and posterior regions had significant impacts on the changes in KMW (p < 0.0001). CONCLUSION: The amount of vertical alveoloplasty during implant surgery has no significant impact on the KMW. The KMW remained stable from baseline to 6 months after alveoloplasty, implant placement, and immediate rehabilitations in potential edentulous arches. The initial KMW and the distribution of implants in the anterior and posterior regions were the possible factors affecting changes in KMW.

Enhancing scanning accuracy of digital implant scans: A systematic review on application methods of scan bodies.

STATEMENT OF PROBLEM: Scan bodies play a crucial role in the accuracy of digital implant scans by serving as implant-positioning transfer devices. Previous literature has demonstrated the effects of scan body characteristics on the accuracy of digital implant scans. However, the optimal application methods of scan bodies to enhance scanning accuracy remain unclear. PURPOSE: The purpose of this systematic review was to determine the optimal application methods of scan bodies to enhance the accuracy of digital implant scans. MATERIAL AND METHODS: An electronic search was conducted by using the PubMed (MEDLINE), Web of Science, Cochrane Library, and Embase databases from November 2018 to 2023. Relevant references from the included studies were further screened manually for eligibility. Following the population, intervention, comparison, and outcome (PICO) criteria, a research question focused on identifying the optimal application method for effectively using scan bodies to enhance scanning accuracy was developed. Specific inclusion criteria involved in vitro and in vivo studies. The Checklist for Reporting In Vitro Studies (CRIS) guidelines were followed and the assessment of the risk of bias in the included studies was conducted. RESULTS: Sixteen articles that met the eligibility criteria were included in this systematic review. Two studies investigated the effect of scan body bevel orientation on the accuracy of digital implant scans, and 3 examined the impact of tightening torque on scan bodies. Among the studies focusing on completely edentulous arches, 5 recommended the use of auxiliary geometric devices on the dental arch to enhance scanning accuracy. However, 2 studies reported no improvements in accuracy after splinting scan bodies with thread. CONCLUSIONS: Different techniques for applying scan bodies, such as configuring bevel orientation, adjusting tightening torque, and attaching auxiliary geometric devices, influence the accuracy of digital implant scans. For scanning completely edentulous arches, attaching auxiliary devices to scan bodies to cover the edentulous ridge effectively enhances scanning accuracy.

Evaluating malocclusion patterns in children with autism spectrum disorder using the index of complexity, outcome and need: a cross-sectional study.

BACKGROUND: The purpose of this study was to evaluate the complexity of malocclusion and existing patterns in children with autism spectrum disorders (ASD) using the index of complexity, outcome and need (ICON). METHODS: This cross-sectional study included children diagnosed with ASD, aged 9-15 years. A group of healthy children with the same demographic characteristics was randomly selected as the control group. Malocclusion was assessed according to ICON scoring protocol. The following parameters were recorded: dental aesthetics, upper arch crowding/spacing, presence of crossbite, anterior-vertical relationship (open and deep bite) and buccal segment anterior-posterior relationship. Finally, an overall ICON score was derived and reported for each patient. Descriptive analysis was performed for all investigated variables. Significance level was set at p < 0.05. RESULTS: A total of 324 children, divided into ASD (162) and control (162) groups, comprised the study population. Our results demonstrated that the average overall ICON score was significantly higher in the ASD group compared to the control group (38.77 vs. 27.43, p < 0.001). ASD children also obtained significantly higher scores regarding the dental aesthetics component (3.84 vs 2.78, p < 0.001). Study groups were significantly different in terms of the prevalence of incisor overbite and open bite (p = 0.002 and p < 0.001, respectively). Patients in the ASD group showed a higher prevalence of Class II and Class III malocclusions (p < 0.001). CONCLUSION: ASD children obtained significantly higher overall ICON scores, indicating more complex and severe malocclusions. These children also exhibited a greater tendency towards Class II and III malocclusions.

Impact of Invisalign® first system on molar width and incisor torque in malocclusion during the mixed dentition period.

In orthodontic treatment of patients during the mixed dentition period, arch expansion and opening deep overbite are one of the objectives to achieve proper alignment of the teeth and correction of sagittal and vertical discrepancies. However, the expected outcomes of most therapeutic regimens are not clear, making it impossible to standardize early treatment effects. Therefore, this study was designed to evaluate the impact of the Invisalign® First System on the dental arch circumference and incisor inclination in patients during the mixed dentition period. A total of 21 children during the mixed dentition period (10 females and 11 males, with an average age of 8.76 years) were included in this study. The patients received non-extraction treatment through Invisalign® First System clear aligners, and no other auxiliary devices were used except Invisalign® accessories. Subsequently, the cooperation degree of patients during treatment and the oral measurement parameters at the beginning (T1) and the end (T2) of treatment were collected. All patients showed moderate/good cooperation degree during treatment. Besides, horizontal width of the maxillary first molar increased significantly; the designed arch expansion was 4.1 mm (±1.4 mm), while the actual arch expansion was 3.0 mm (±1.7 mm). Furthermore, the torque expression rate of upper anterior teeth reached 56.53%. Invisalign® First System clear aligners can effectively correct the teeth of patients during the mixed dentition period, widen the circumference of dental arch, and control the torque of incisors.

Knowledge, attitudes, and practice related to tooth loss and dentures among patients with dental arch deficiencies.

BACKGROUND: Tooth loss is a common problem that affects many people worldwide. Exploring knowledge, attitude, and practice (KAP) among patients can identify barriers and challenges in following recommended practices, providing valuable insights for dental healthcare providers, policymakers, and researchers. This study aimed to explore the KAP of patients with dental arch deficiencies regarding tooth loss and dentures. METHODS: This web-based, cross-sectional study was conducted among patients with dental arch deficiencies using a self-designed questionnaire. RESULT: 3166 valid questionnaires were included. Participants' mean KAP scores were 6.84 ± 2.27 (possible range: 0 ~ 12), 39.4 ± 3.72 (possible range: 9 ~ 45), and 27.7 ± 4.36 (possible range: 8 ~ 40), respectively. Multivariable logistic regression analysis showed that knowledge (OR = 1.383), employed (OR = 1.805), family history (OR = 2.158), and treatment (OR = 1.683) were independently associated with attitude. Moreover, knowledge (OR = 1.239), attitude (OR = 1.250), female (OR = 0.619), age (OR = 0.967), college/bachelor (OR = 0.373), and master and above degree (OR = 0.418), employed (OR = 0.554) or student (OR = 0.434), with 10,001-20,000 Yuan household income per month (OR = 0.492), have been married (OR = 0.609), smoking (OR = 0.595), drinking (OR = 0.397), disease duration (OR = 0.972), with family history (OR = 1.676), and with treatment (OR = 3.492) were independently associated with practice (all P < 0.05). CONCLUSION: Patients with dental arch deficiencies have insufficient knowledge, positive attitudes, and moderate practice toward tooth loss and dentures, which might be affected by multiple demographic factors.

Esthetic Rehabilitation with No-Preparation Veneers Applying BOPT: A Case Report with a 12-Month Follow-Up.

A 45-year-old female patient was referred to the Department of Cosmetic Dentistry, Damascus University, seeking to improve dental aesthetics. The clinical examination showed a low smile line and microdontia in the maxillary arch. The treatment plan consisted of applying no-prep veneers with gingival modification, which is described in the biologically oriented preparation technique (BOPT) as a gingitage technique. The gingitage of the sulcus was performed using a yellow ring diamond flame with an inclination of 45 degrees, which causes it to bleed and creates a space between the internal wall of the sulcus and the axial wall of the tooth. After a 12-month follow-up, the gingiva was free of inflammation, recession, and plaque, and there was no increase in probing depth, according to the modified gingival index (MGI), gingival recession index (GRI), Silness-Loe plaque index (PI), and the community periodontal index of treatment needs (CPITN), respectively. The porcelain veneers were intact, with no chippings, cracks, and marginal discoloration. The patient was satisfied with her new smile.

Prevalence of Zygomatic Air Cell defects in a sample of 6-18-year-old patients in Saudi Arabia and Yemen: a retrospective study.

OBJECTIVES: This study aimed to comprehensively analyze the prevalence and influencing factors of Zygomatic Air Cell Defects (ZACD) among pediatric and adolescent populations in Saudi Arabia and Yemen. MATERIALS AND METHODS: A cross-sectional retrospective study was conducted, utilizing digital panoramic radiographs of dental outpatients aged 6 to 18 years. The data were collected from registered digital databases of dental clinics in Al-Qassim, Saudi Arabia, and an oral and maxillofacial radiology center in Sana'a, Yemen, covering the period from July 2018 to September 2022. The radiographs were evaluated based on inclusion and exclusion criteria, and ZACD was assessed using standardized descriptions. Statistical analysis, including logistic regression, was employed to examine the impact of the associated factors. RESULTS: The study encompassed a total of 3,169 participants, revealing an overall ZACD prevalence of 28.5%. Age emerged as a significant predictor (p ≤ 0.0001), with the likelihood of ZACD increasing as the age of the individual advances. Gender and geographic region did not exhibit statistically significant differences in ZACD prevalence. CONCLUSION: This study provides crucial insights into the prevalence of Zygomatic Air Cell Defects among pediatric and adolescent populations in Saudi Arabia and Yemen. It underscores the prevalence of ZACD and the notable influence of age on its occurrence. Additionally, the research challenges prior notions of gender and regional variations in ZACD prevalence, emphasizing the complexity of the factors involved. Early detection is essential to avoid unwanted complications during any surgical intervention in this area.

Comparative evaluation of transverse width indices for diagnosing maxillary transverse deficiency.

OBJECTIVES: This study aimed to compare and evaluate different transverse width indices for diagnosing maxillary transverse deficiency (MTD), a common malocclusion characterized by uncoordinated dental arches, crossbites, and tooth crowding. MATERIALS AND METHODS: Sixty patients aged 7-12 years were included in the study, with 20 patients diagnosed with MTD and 40 normal controls. Transverse width indices, including maxillary width at the buccal alveolar crest and lingual midroot level, as well as at the jugal process width, were measured. Differences between these indices and their corresponding mandibular indices were used as standardized transverse width indices. The reference range of these indices was determined and evaluated. Receiver operating characteristic (ROC) analysis was performed to evaluate their diagnostic ability. RESULTS: The transverse width indices and standardized transverse width indices of the MTD group were significantly smaller than those of the control group, except for the jugal process width. The evaluation of the reference range and ROC analysis revealed that the difference of the maxillomandibular width at buccal alveolar crest was the most accurate diagnostic method. CONCLUSIONS: The jugal point analysis method may not be suitable for diagnosing MTD. Instead, measuring the difference in maxillomandibular width at the buccal alveolar crest proves to be a more reliable and accurate diagnostic method for MTD.

Immediate full-arch fixed rehabilitation of a narrow mandible with newly conceived connection system implants: A case report.

Rehabilitating thin jaws without reconstructive surgery entails using narrow implants. The proposed treatment adopted an innovative implant system, allowing the mini-screws to be parallel and immediately loaded. A mandible, wearing an overdenture, was functionalized contextually to the residual dental extraction and the placement of six 2.4-mm thick one-piece implants. Low-profile intermediate abutments, the LEMs, able to rotate over the spherical heads of the fixtures, were connected after suturing, oriented, and blocked in a mutual parallel position. The copings, engaging with a tapered juncture of the LEMs, resulted in their alignment to be intraorally wedged together. The provisional superstructure enclosed the copings and was immediately connected to the implants, and the definitive prosthesis was delivered after three months. No clinical signs of peri-implantitis or radiographically evident bone loss were recorded after a two-year follow-up without any prosthetic complication. No cases have been published regarding mini-implants bearing fixed prosthesis rehabilitation.

Prevalence of impacted and transmigrated canines in orthodontic patients - A radiographic study.

Background: The canine plays a vital role in dentofacial aesthetics and function. It supports the base of the alar and upper lip, which are crucial for smile aesthetics. When impacted, these functions are lost, leading to low self-esteem and overall poor health-related quality of life. The present study was conducted to find the prevalence of impacted and transmigrated canines in orthodontic patients and also to find the most prevalent type of canine impaction. Materials and Methods: This retrospective study was conducted in a hospital setting at Dental College. A total of 3050 OPGs (Orthopantomagram) of patients who visited dental hospitals for orthodontic treatment constituted the final sample. Demographic details regarding age, gender, and place of residence were collected from the patients. Evaluation of sample radiographs on the standard light box was performed to collect data regarding impacted and transmigrated canines. Statistical analysis was performed using descriptive statistics and Chi-square test. Results: Prevalence of impacted canine was found to be 2.46%. Impacted canine prevalence of 1.53% and 2.85% was reported in males and females, respectively. Only two female patients had transmigrated mandibular impacted canines. Comparison of arch showed a statistically significant (P value 0.02) higher prevalence in the maxillary arch, which was 1.54%, and in the mandibular arch, it was 0.92%. The present study reported significantly more unilateral impactions (P value 0.00) than bilateral impactions. Conclusion: The overall prevalence for impacted canine was 2.46%. Prevalence was higher in female patients. Early diagnosis of impacted canines is vital for planning orthodontic treatment in such patients.