Risk factors associated with radiological and clinical recurrences after laparoscopic repair of large hiatal hernia with TiO2Mesh™ reinforcement.

INTRODUCTION: Laparoscopic repair of large para-esophageal hiatal hernias (LPHH) remains controversial. Several meta-analyses suggest hiatus reinforcement with mesh has better outcomes over cruroplasty in terms of less recurrence. The aim of this study was to evaluate the medium-term results of treating LPHH with a biosynthetic monofilament polypropylene mesh coated with titanium dioxide to enhance biocompatibility (TiO2Mesh™). METHODS: A retrospective observational study, using data extracted from a prospectively collected database was performed at XXX from December 2014 to June 2023. Included participants were all patients who underwent laparoscopic repair of large (> 5 cm) type III hiatal hernia in which a TiO2Mesh™ was used. The results of the study, including clinical and radiological recurrences as well as mesh-related morbidity, were analyzed. RESULTS: Sixty-seven patients were finally analyzed. Laparoscopic approach was attempted in all but conversion was needed in one patient because of bleeding in the lesser curvature. With a median follow-up of 41 months (and 10 losses to follow-up), 22% of radiological recurrences and 19.3% of clinical recurrences were described. Regarding complications, one patient presented morbidity associated with the mesh (mesh erosion requiring endoscopic extraction). Recurrent hernia repair was an independent factor of clinical recurrence (OR 4.57 95% CI (1.28-16.31)). CONCLUSION: LPHH with TiO2Mesh™ is safe and feasible with a satisfactory medium-term recurrence and a low complication rate. Prospective randomized studies are needed to establish the standard repair of LPHH.

Customizable, biocompatible implants for dorsal nasal augmentation: An in vivo pilot study of eight polylactic acid scaffold designs.

Augmentation of the nasal dorsum often requires implantation of structural material. Existing methods include autologous, cadaveric or alloplastic materials and injectable hydrogels. Each of these options is associated with considerable limitations. There is an ongoing need for precise and versatile implants that produce long-lasting craniofacial augmentation. Four separate polylactic acid (PLA) dorsal nasal implant designs were 3D-printed. Two implants had internal PLA rebar of differing porosities and two were designed as "shells" of differing porosities. Shell designs were implanted without infill or with either minced or zested processed decellularized ovine cartilage infill to serve as a "biologic rebar", yielding eight total treatment groups. Scaffolds were implanted heterotopically on rat dorsa (N = 4 implants per rat) for explant after 3, 6, and 12 months followed by volumetric, histopathologic, and biomechanical analysis. Low porosity implants with either minced cartilage or PLA rebar infill had superior volume retention across all timepoints. Overall, histopathologic and immunohistochemical analysis showed a resolving inflammatory response with an M1/M2 ratio consistently favoring tissue regeneration over the study course. However, xenograft cartilage showed areas of degradation and pro-inflammatory infiltrate contributing to volume and contour loss over time. Biomechanical analysis revealed all constructs had equilibrium and instantaneous moduli higher than human septal cartilage controls. Biocompatible, degradable polymer implants can induce healthy neotissue ingrowth resulting in guided soft tissue augmentation and offer a simple, customizable and clinically-translatable alternative to existing craniofacial soft tissue augmentation materials. PLA-only implants may be superior to combination PLA and xenograft implants due to contour irregularities associated with cartilage degradation.

Association between skin suture devices and incidence of incisional surgical site infection after gastrointestinal surgery: systematic review and network meta-analysis.

BACKGROUND: Surgical site infections (SSIs) are common complications after abdominal surgery. AIM: To compare which suture devices could reduce the incidence of incisional surgical site infections (SSIs) after gastrointestinal surgery using a systematic review and network meta-analysis. METHODS: The CENTRAL, PubMed, and ICHUSHI-Web databases were searched from January 1st, 2000, to December 31st, 2022, for randomized clinical trials (RCTs) comparing the incidence of incisional SSI after gastrointestinal surgery among patients treated with different surgical suture devices, including non-absorbable sutures, absorbable sutures, skin staplers, and tissue adhesives (last searched in August 23th, 2023). The risk of bias was assessed using the criteria of the Cochrane Handbook for Systematic Reviews of Interventions. To estimate the pooled odds ratios (ORs) for each comparison, a fixed-effect inverse-variance model based on the Mantel-Haenszel approach was employed. FINDINGS: A total of 18 RCTs with 5496 patients were included in this study. The overall SSIs in absorbable sutures were significantly lower than those in skin staplers (OR: 0.77; 95% confidence intervals (CI): 0.63-0.95) and non-absorbable sutures (OR: 0.62; 95% CI: 0.39-0.99), whereas SSIs in absorbable sutures were not significantly different from the SSIs in tissue adhesive. The highest P-score was 0.91 for absorbable sutures. A funnel plot for estimating the heterogeneity of the studies revealed that a publication bias would be minimal (Egger test, P = 0.271). CONCLUSION: This study showed that absorbable sutures reduced incisional SSIs in gastrointestinal surgical operations compared to any other suture devices.

Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes.

Biodegradable (BP) poly(D,L-lactic acid) (PDLLA) membranes are widely used in tissue engineering. Here, we investigate the effects of varying concentrations of PDLLA/gelatin membranes electrospun in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP; C3H2F6O) solvent on their mechanical and physical properties as well as their biocompatibility. Regardless of the environmental conditions, increasing the gelatin content resulted in elevated stress and reduced strain at membrane failure. There was a remarkable difference in strain-to-failure between dry and wet PDLLA/gelatin membranes, with wet strains consistently higher than those of the dry membranes because of the hydrophilic nature of gelatin. A similar wet strain (εw = 2.7-3.0) was observed in PDLLA/gelatin membranes with a gelatin content between 10 and 40%. Both dry and wet stresses increased with increasing gelatin content. The dry stress on PDLLA/gelatin membranes (σd = 6.7-9.7 MPa) consistently exceeded the wet stress (σw = 4.5-8.6 MPa). The water uptake capacity (WUC) improved, increasing from 57% to 624% with the addition of 40% gelatin to PDLLA. PDLLA/gelatin hybrid membranes containing 10 to 20 wt% gelatin exhibited favorable wet mechanical properties (σw = 5.4-6.3 MPa; εw = 2.9-3.0); WUC (337-571%), degradability (11.4-20.2%), and excellent biocompatibility.

Usefulness of multiple bioabsorbable Mg screws/K­wires for comminuted radial head fractures.

PURPOSE: We hypothesized that multiple absorbable screws/K-wires would be effective for native head preservation in comminuted radial head fracture fixation (com-RHFs). METHODS: Seventeen patients who met the inclusion criteria between 2018 and 2020 were included. Radiologic findings indicating proper union and clinical outcomes such as the range of elbow motion, visual analog scale score, and Mayo Elbow Performance Score were assessed prospectively after surgery and at least three years of follow-up. RESULTS: The mean follow-up period was 4.6 years. Eleven, one, three, and two patients presented with isolated com-RHFs, type 2 (accompanied injury of medial collateral ligament), type 4 ("terrible triad") fractures, and type 5 posterior olecranon fracture-dislocations, respectively. Union was achieved after a mean of nine weeks postoperatively. The head and shaft angles did not differ significantly from the contralateral normal values (p = 0.778 and 0.872, coronal and sagittal, respectively). At the final follow-up, the mean flexion-extension/pronation-supination arcs were 126.47 ± 4.92°/135.59 ± 10.13°, and thus were significantly different from those on the contralateral side (p < 0.001, both), however the arcs were functional ranges for ordinary daily life. Also, functional status was satisfactory in all individuals. The arthritis grade and extent of heterotrophic ossification were satisfactory in all cases, and there were no serious complications requiring revision surgery. CONCLUSIONS: Absorbable screw/K-wire fixation for com-RHFs is an option before radial head arthroplasty associated with a low complication rate and no need for revision.

Absorbable vs. non-absorbable suture: which one gives better results?

BACKGROUND: There is no ideal suture material or ideal sewing technique. The type of suture material affects the quality of the scars. Patient and surgeon satisfaction with the quality and comfort of the scar is one of the main goals of modern surgery. AIMS: This study aims to compare the quality of scars and patient satisfaction after using two different types of sutures. METHODS: This research was conducted as a prospective study that included 64 patients whose surgical wounds were closed with intradermal suture using different suturing materials according to which the patients were divided into two groups: absorbable - Monocryle (32) and non-absorbable - DemeLENE suture (32). POSAS scale and an ultrasound machine were used to assess the scars. The doctor and the patient evaluated seven parameters on two occasions, after 2 and 6 weeks after the surgery. RESULTS: The statistically significant advantage was found after 2 weeks in scars sewn with non-resorptive suture in terms of elasticity, doctor's general impression, pain, itching, color, stiffness, thickness, irregularity, and patient's general impression. After 6 weeks, statistically significantly better results were shown on scars sewn with non-resorptive thread for the parameters doctor's general impression, itching, irregularity, and patient's general impression. CONCLUSIONS: Non-resorptive sutures show statistically significantly better results, especially after 2 weeks from the patient's point of view so we consider them more comfortable and convenient to use.

Multicentric observational study of the possible side effects of the COVID-19 vaccine in relation to absorbable thread insertion.

Background: Coronavirus disease 2019 (COVID-19) vaccination programs in Europe began in December 2020, and as the number of vaccinated people increased, more information emerged about the possible side effects of vaccines. Recently, some reports appeared around the association of adverse reactions following soft-tissue filler injections and the COVID-19 vaccines. This fact raised the concerns of esthetic practitioners regarding the possibility of the association of the COVID-19 vaccine and adverse effects in other esthetic treatments. Many of us wonder if botox injection, biostimulation, or other procedure could trigger the same or other adverse reactions after the COVID-19 vaccination. Many colleagues postpone esthetic treatments, canceling the appointments. Objective: The objective of our investigation was to understand if any adverse reactions have been observed in the patients who underwent threads implantation before and after the vaccination. Materials and Methods: Four medical centers have collected the data of the patients treated with absorbable threads before the vaccination and after vaccination for COVID-19. The dossiers of 190 patients with a mean age of 50.4 years were evaluated. Three questionnaires were administered 1 week, 1 month, and 3 months after thread implantation. Results: There were no adverse reactions in the groups of patients under monitoring. Only one patient presented signs of inflammation and infection, but they are more probably attributable to the contamination during thread insertion. Conclusions: No patients treated with absorbable threads developed adverse events in relation to the COVID-19 vaccine. The only case of inflammation is attributable probably to the contamination of the thread during the procedure.

Synergistic Machine Learning Accelerated Discovery of Nanoporous Inorganic Crystals as Non-Absorbable Oral Drugs.

Machine learning (ML) has taken drug discovery to new heights, where effective ML training requires vast quantities of high-quality experimental data as input. Non-absorbable oral drugs (NODs) have unique safety advantage for chronic diseases due to their zero systemic exposure, but their empirical discovery is still time-consuming and costly. Here, a synergistic ML method, integrating small data-driven multi-layer unsupervised learning, in silico quantum-mechanical computations, and minimal wet-lab experiments is devised to identify the finest NODs from massive inorganic materials to achieve multi-objective function (high selectivity, large capacity, and stability). Based on this method, a NH4-form nanoporous zeolite with merlinoite (MER) framework (NH4-MER) is discovered for the treatment of hyperkalemia. In three different animal models, NH4-MER shows a superior safety and efficacy profile in reducing blood K+ without Na+ release, which is an unmet clinical need in chronic kidney disease and Gordon's syndrome. This work provides a synergistic ML method to accelerate the discovery of NODs and other shape-selective materials.

Remodeling and Regenerative Properties of Fully Absorbable Meshes for Abdominal Wall Defect Repair: A Systematic Review and Meta-Analysis of Animal Studies.

Fully absorbable meshes can repair abdominal wall defects and effectively reduce the incidence of complications, but different types of fully absorbable meshes have different remodeling and regeneration effects. In order to investigate and compare the effects of different fully absorbable meshes on remodeling and regeneration in animals and reduce the biological risk of clinical translation, SYRCLE was adopted to evaluate the methodological quality of the included studies, and GRADE and ConQual were used to evaluate the quality of evidence. According to the inclusion and exclusion criteria, a total of 22 studies related to fully absorbable meshes were included in this systematic review. These results showed that fiber-based synthetic materials and fiber-based natural materials exhibited better restorative and regenerative effects indicated by infiltration and neovascularization, when compared with a porcine acellular dermal matrix. In addition, the human acellular dermal matrix was found to have a similar regenerative effect on the host extracellular matrix and scaffold degradation compared to the porcine acellular dermal matrix, porcine intestinal submucosa, and fiber-based natural materials, but it offered higher tensile strength than the other three. The quality of the evidence in this field was found to be poor. The reasons for downgrading were analyzed, and recommendations for future research included more rigor in study design, more transparency in result reporting, more standardization of animal models and follow-up time for better evaluation of the remodeling and regenerative performance of abdominal wall hernia repair meshes, and less biological risk in clinical translation.

Maxillary bone healing and CT value after Le Fort I osteotomy using absorbable plate system: A retrospective study.

This study aimed to evaluate maxillary bone healing and computed tomography (CT) values after Le Fort I osteotomy with sagittal split ramus osteotomy in patients with class II and III malocclusion. Four absorbable plates and screws were used to fix the maxillary segments in all patients. For 112 sides (58 patients), the bone defect areas at the anterior and posterior sites between the maxillary segments were measured using 3-dimensional CT views reconstructed over a constant CT value at 1 week and 1 year postoperatively. Subsequently, CT values at the upper, middle, and lower sites around the osteotomy line in the medial, middle, and lateral regions were measured. The bone defect area after 1 year increased at the anterior site in class III and at both the anterior and posterior sites in class II (P < 0.05). This study suggests that the increase in bone defect area was affected by lower CT values at the middle site of the middle and lateral regions in class II, and that bony defects between fragments in the maxilla could partially remain in both classes II and III within 1 year after Le Fort I osteotomy.

Stable fixation using absorbable sutures in craniofacial surgery in patients over 24 months of age-a retrospective study.

PURPOSE: In craniofacial surgery, the stable fixation of transposed bone segments is crucial in order to ensure good long-term results. The use of absorbable material in fixation avoids the need for a second surgery, which would otherwise be required to remove osteosynthesis material. The authors of the present manuscript have already demonstrated that absorbable sutures ensure the stable fixation of bone segments in patients up to 24 months of age. However, it has thus far remained unclear whether stable fixation is possible in older patients by using only absorbable sutures due to the slower bone remodelling and prolonged healing time in this cohort. METHOD: For the present study, osteosynthesis was performed in 50 patients ranging from 25.7 to 192.1 months of age (mean, 61.4 ± 21.7 months) using solely absorbable sutures (PDS II®, Ethicon, Germany). Post-operative stability and possible restrictions-such as foreign body reactions-were evaluated within clinical and radiological routine follow-ups. RESULTS: All children demonstrated clinically and radiologically stable osteosynthesis both directly post-operatively and in follow-ups. No significant foreign body reaction could be seen. CONCLUSION: The present study demonstrates-for the first time-that absorbable sutures with a longer absorption period are also very well suited for the fixation of bone segments in patients over 24 months of age. The sole use of absorbable sutures in children over 24 months of age is a safe procedure with nearly no foreign body reactions. The procedure enables stable and highly cost-effective osteosynthesis without altering the osteotomy design.

Evaluation of Efficacy of Different Plating Systems in ZMC Fractures: An Original Research.

Objective: This study's objective was to assess and contrast the performance of several plating techniques in the treatment of zygomaticomaxillary complex (ZMC) fractures. Group A (Microplate System), Group B (Titanium Mesh System), and Group C (Absorbable Plate System) plating systems were the ones that were studied. Materials and Methods: With 10 patients in each group, a retrospective analysis of 30 patients with ZMC fractures was done. The following information was gathered: fracture reduction, stable fixation, complications, and patient satisfaction. Analysis was done on patient-reported outcomes, surgical outcomes, and demographic factors. Results: Group B (Titanium Mesh System) came in second with rates of 70% and 80%, respectively, while Group A (Microplate System) showed the highest rates of fracture reduction (90%) and stable fixation (100%). For fracture reduction and stable fixation, Group C (Absorbable Plate System) demonstrated rates of 80% and 90%, respectively. For Groups A, B, and C, the complication rates were 20%, 30%, and 10%, respectively. For Groups A, B, and C, the patient satisfaction levels were 90%, 80%, and 70%, respectively. Conclusion: According to the results, the Microplate System (Group A) is better than the Titanium Mesh System (Group B) and the Absorbable Plate System (Group C) in terms of fracture reduction and stable fixation when treating ZMC fractures. All plating systems had acceptable complication rates, and overall patient satisfaction ratings were high. Fracture features and patient-specific considerations should be taken into account while making individualized treatment options.

Prospective, multi-centric, international, single-arm, cohort study to assess a synthetic polyamide suture material in oral surgery to close the mucosa - MUCODA study.

OBJECTIVES: The aim was to collect different clinical parameters systematically and proactively regarding safety, effectiveness, and performance of a nylon monofilament suture under routine clinical practice for oral surgery. METHODS: The study design was prospective, bicentric, international, single-armed, and observational. A non-absorbable suture was applied to close the mucosa after different dental surgical interventions. Main objective was the incidence of combined postoperative complications until suture removal. The 95 % Confidence Interval (Agresti-Coull method) was used to prove the non-inferiority with a pre-specified upper margin of 21.9 %. Secondary variables were intraoperative suture handling, patient pain and satisfaction, wound healing, aesthetic appearance, and bacterial contamination. RESULTS: 105 patients were enrolled. Complication rate was low (1.9 %), 2 swellings occurred. Pain was present for 1.61 days ± 1.42 after various dental interventions with an average pain level of 20.98 ± 22.60 (VAS). Patients with impacted third molar extraction showed the longest pain duration (6 days) combined with the highest mean pain level of 35.33 ± 30.45 (VAS). Intraoperative suture handling was very good to excellent. Suture removal was done after an average duration of 7.56 ± 2.09 days. Patient's satisfaction was high, and an excellent wound healing was reported by the dentists. Aesthetic appearance only performed in implant patients was rated by oral surgeons with an average of 96.19 ± 3.79 points [min. 80 - max. 100] at 5 months postoperatively. Thread bacterial analysis showed that F. nucleatum was the most present species. CONCLUSIONS: Our findings indicate that the non-absorbable, nylon-based monofilament suture used is safe and quite suitable for oral mucosal closure after various dental surgical interventions such as tooth extraction, implant placement and impacted third molar extraction. CLINICAL SIGNIFICANCE: This study showed the safe use of a non-absorbable, nylon-based monofilament suture for different oral surgical interventions under daily routine clinical practice.

Tension band high-strength suture combined with absorbable cannulated screws for treating transverse patellar fractures: finite element analysis and clinical study.

Objective: Few reports exist on the treatment of transverse patellar fractures (TPFs) using absorbable cannulated screws and high-strength sutures, and most screws and sutures lack good biomechanics and clinical trials. Therefore, this study aimed to demonstrate the biomechanical stability and clinical efficacy of tension-band high-strength sutures combined with absorbable cannulated screws (TBSAS) in treating TPFs (AO/OTA 34 C1). Methods: Finite element models of five internal fixation schemes were established: tension-band wire with K-wire (TBW), TBW with cerclage wire (TBWC), TBW with headless pressure screws (TBWHS), TBW with full-thread screws (TBWFS), and TBSAS. We comprehensively compared the biomechanical characteristics of the TBSAS treatment scheme during knee flexion and extension. Forty-one patients with TPFs in our hospital between January 2020 and August 2022 were retrospectively enrolled and divided into the TBSAS (n = 22) and TBWC (n = 19) groups. Clinical and follow-up outcomes, including operative time, visual analog scale (VAS) pain score, postoperative complications, Bostman score, and final knee range of motion, were compared between both groups. Results: Finite element analysis (FEA) showed that TBWHS and TBWFS achieved the minimum mean fracture interface relative displacement during knee flexion (45°, 0-500 N bending load) and full extension (0°, 0-500 N axial load). There was no significant difference between TBSAS (0.136 mm) and TBWC (0.146 mm) during knee flexion (500 N); however, TBSAS displacement was smaller (0.075 mm) during full extension (500 N). Furthermore, the stress results for the internal fixation and the patella were generally lower when using TBSAS. Retrospective clinical studies showed that the TBSAS group had a shorter operative time, lower VAS pain score at 1 and 2 months postoperatively, better Bostman knee function score at 3 and 9 months postoperatively, and better final knee joint motion than the TBWC group (all p < 0.05). There were five cases (26.3%) of internal fixation stimulation complications in the TBWC group. Conclusion: TBSAS demonstrated excellent safety and effectiveness in treating TPFs. It is sufficient to meet the needs of TPF fixation and early functional exercise and effectively reduces metal internal fixation-induced complications and secondary surgery-induced trauma.

Two-Year Preclinical Evaluation of Long-Term Absorbable Poly-4-hydroxybutyrate Scaffold for Surgical Correction of Pelvic Organ Prolapse.

INTRODUCTION AND HYPOTHESIS: Fully absorbable implants may be an alternative to permanent meshes in the correction pf pelvic organ prolapse (POP) as they may reduce adverse events by promoting tissue regeneration and collagen metabolism. This study was aimed at evaluating the long-term host and biomechanical response to a fully absorbable poly-4-hydroxybutyrate (P4HB) scaffold in comparison with polypropylene (PP) mesh. METHODS: Poly-4-hydroxybutyrate scaffold (n = 16) and PP mesh (n = 16) were surgically implanted in the posterior vaginal wall of parous female Dohne Merino sheep. Vaginal explants were evaluated in terms of gross necropsy, host response (immune response, collagen deposition, tissue regeneration), biomechanics, and degradation of P4HB at 12 and 24 months post-implantation. RESULTS: Gross necropsy revealed no infection or fluid collection using P4HB or PP. At 12 months, exposures were observed with both P4HB (3 out of 8) and PP (4 out of 8), whereas at 24 months, exposures were observed only with PP (4 out of 8). The tensile stiffness of the P4HB explants was maintained over time despite complete absorption of P4HB. The collagen amount of the vaginal tissue after P4HB implantation increased over time and was significantly higher than PP at 24 months. P4HB scaffolds exhibited significantly lower myofibroblast differentiation than PP meshes at 24 months. CONCLUSIONS: The P4HB scaffold allowed for gradual load transfer to the vaginal wall and resulted in mechanically self-sufficient tissue. P4HB scaffold had a more favorable host response than PP mesh, with higher collagen content, lower myofibroblastic differentiation, and no exposures at 24 months. P4HB scaffolds have potential as an alternative to permanent implants in treating POP.

Increased symptoms of stiffness after opening-wedge high tibial osteotomy are associated with worse postoperative knee function outcomes and lower patient satisfaction rate.

BACKGROUND: Symptoms of knee stiffness after open wedge high tibial osteotomy (OW-HTO) can significantly affect surgical effectiveness, but no studies have reported risk factors for knee stiffness after OW-HTO. METHODS: Patients treated with OW-HTO for the first time between 2018 and 2021 were included. Data were collected on patient demographics, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Short Form (SF) 12 scores, hip-knee-ankle angle (HKA) and patient satisfaction before and after surgery. Patients with worse WOMAC stiffness scores at 1 year were defined as the 'increased stiffness' group and the other cohort as the 'non-stiffness' group. The primary outcome of the study was to compare postoperative knee function scores (WOMAC and SF-12), HKA and patient satisfaction rate between the two groups. The secondary outcome was the use of logistic regression to analyze independent predictors of increased postoperative stiffness symptoms. RESULTS: At 1 year postoperatively, 95 (11.3%) patients had a significant increase in stiffness. Patients had significantly (p < .001) less improvement in pain, function, and total WOMAC scores, and SF-12 score than those in the non-stiffness group (n = 745). However, the differences in WOMAC and SF-12 scores in increased stiffness group at 1 year post-operatively were statistically significant (p < .001) compared to the non-stiffness group. There was no statistically significant difference in HKA in the increased stiffness group (172.9° ± 2.3°) compared to non-stiffness group (173.4° ± 2.6°) at 1 year postoperatively (p = .068). Patient satisfaction was significantly lower in the increased stiffness group (p < .001). Logistic regression analysis showed that diabetes (odds ratio (OR) 1.809, p = .034) and preoperative WOMAC stiffness score of 44 or less (OR 4.255 p < .001) were predictors of increased stiffness. CONCLUSIONS: Patients with increased stiffness after OW-HTO had worse functional outcomes and lower patient satisfaction rates and patients at risk of being in this group should be informed pre-operatively.

Long-term outcomes of PGA-TMC absorbable synthetic scaffold in both clean and contaminated ventral hernia repairs.

BACKGROUND: Biosynthetic meshes afford the cost advantages of being made from fully synthetic material, but are also biodegradable, making them a versatile option that can be used in both clean and contaminated cases. The aim of this study is to evaluate the safety profile and long-term outcomes of using GORE BIO-A (BIO-A) as an adjunct to abdominal wall reconstruction in all wound classes. METHODS: A retrospective review identified patients undergoing abdominal hernia repair using BIO-A from October 2008 to June 2018. The primary outcome was hernia recurrence rate. Only patients with at least 6-month follow-up were included when looking at recurrence rates. Secondary outcomes included 30-day morbidity categorized according to CDC Surgical Site Infection Criteria, return to operating/procedure room (RTOR), 30-day readmission, length of stay (LOS), and mortality. RESULTS: A total of 207 patients were identified, CDC Wound Classification breakdown was 127 (61.4%), 41 (19.8%), 14 (6.8%), and 25 (12.1%) for wound classes I, II, III, and IV, respectively. Median follow-up was 55.4 months (range 0.2-162.4). Overall recurrence rate was 17.4%. Contaminated cases experienced higher recurrence rates (28.8% versus 10.4%, p = 0.002) at a mean follow up of 46.9 and 60.8 months for contaminated and clean patients, respectively. Recurrent patients had higher BMI (32.4 versus 28.4 kg/m2, p = 0.0011), larger hernias (162.2 versus 106.7 cm2, p = 0.10), higher LOS (11.1 versus 5.6 days, p = 0.0051), and higher RTOR rates (16.7% versus 5.6%, p = 0.053). 51 (24.5%) patients experienced some morbidity, including 19 (9.2%) surgical site occurences, 7 (3.4%) superficial surgical site infections, 16 (7.7%) deep surgical site infections, and 1 (0.5%) organ space infection. CONCLUSION: This study affirms the use of biosynthetic mesh as a cost-effective alternative in all wound classifications, yielding good outcomes, limited long-term complications, and low recurrence. rates.

Effect of Gelatin Content on Degradation Behavior of PLLA/Gelatin Hybrid Membranes.

BACKGROUND: Poly(L-lactic acid) (PLLA) is a biodegradable polymer (BP) that replaces conventional petroleum-based polymers.  The hydrophobicity of biodegradable PLLA periodontal barrier membrane in wet state can be solved by alloying it with natural polymers. Alloying PLLA with gelatin imparts wet mechanical properties, hydrophilicity, shrinkage, degradability and biocompatibility to the polymeric matrix. METHODS: To investigate membrane performance in the wet state, PLLA/gelatin membranes were synthesized by varying the gelatin concentration from 0 to 80 wt%. The membrane was prepared by electrospinning. RESULTS: At the macroscopic scale, PLLA containing gelatin can tune the wet mechanical properties, hydrophilicity, water uptake capacity (WUC), degradability and biocompatibility of PLLA/gelatin membranes. As the gelatin content increased from 0 to 80 wt%, the dry tensile strength of the membranes increased from 6.4 to 38.9 MPa and the dry strain at break decreased from 1.7 to 0.19. PLLA/gelatin membranes with a gelatin content exceeding 40% showed excellent biocompatibility and hydrophilicity. However, dimensional change (37.5% after 7 days of soaking), poor tensile stress  in wet state (3.48 MPa) and rapid degradation rate (73.7%) were observed. The highest WUC, hydrophilicity, porosity, suitable mechanical properties and biocompatibility were observed for the PLLA/40% gelatin membrane. CONCLUSION: PLLA/gelatin membranes with gelatin content less than 40% are suitable as barrier membranes for absorbable periodontal tissue regeneration due to their tunable wet mechanical properties, degradability, biocompatibility and lack of dimensional changes.

[Research on the method of loading exosomes onto absorbable stents].

Objective: To explore a method of loading exosomes onto absorbable stents. Methods: By building a stent-(3-aminopropyl) triethoxysilane-1, 2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol) 5000]-exosomes connection, the exosomes were loaded onto absorbable stents to obtained the exosome-eluting absorbable stents. The surface conditions of the stents and absorption of exosomes were observed by scanning electron microscope and identified through the time-of-flight mass spectrometry; the roughness of the stents' surfaces was observed by atomic force microscope; the appearances and sizes of the stents were observed by stereomicroscope; and the radial force was tested by tensile test machine. The absorbable stents were used as control. Results: The scanning electron microscope observation showed that the exosome-eluting absorbable stents had some small irregular cracks on the surface where many exosomes could be seen. The atomic force microscopy observation showed that within the range of 5 µm 2, the surface roughness of the absorbable stents was ±20 nm, while the surface roughness of the exosome-eluting absorbable stents was ±70 nm. In the results of time-of-flight mass spectrometry, both the exosome-eluting absorbable stents and exosomes had a peak at the mass charge ratio of 81 (m/z 81), while the absorbable stents did not have this peak. The peak of exosome-eluting absorbable stents at m/z 73 showed a significant decrease compared to the absorbable stents. The stereomicroscope observation showed that the sizes of exosome-eluting absorbable stents met standards and the surfaces had no cracks, burrs, or depressions. The radial force results of the exosome-eluting absorbable stents met the strength standards of the original absorbable stent. Conclusion: By applying the chemical connection method, the exosomes successfully loaded onto the absorbable stents. And the sizes and radial forces of this exosome-eluting absorbable stents meet the standards of the original absorbable stents.

Anatomical Brushite-Coated Mg-Nd-Zn-Zr Alloy Cage Promotes Cervical Fusion: One-Year Results in Goats.

In this study, an anatomical brushite-coated Mg-Nd-Zn-Zr alloy cage was fabricated for cervical fusion in goats. The purpose of this study was to investigate the cervical fusion effect and degradation characteristics of this cage in goats. The Mg-Nd-Zn-Zr alloy cage was fabricated based on anatomical studies, and brushite coating was prepared. Forty-five goats were divided into three groups, 15 in each group, and subjected to C2/3 anterior cervical decompression and fusion with tricortical bone graft, Mg-Nd-Zn-Zr alloy cage, or brushite-coated Mg-Nd-Zn-Zr alloy cage, respectively. Cervical radiographs and computed tomography (CT) were performed 3, 6, and 12 months postoperatively. Blood was collected for biocompatibility analysis and Mg2+ concentration tests. The cervical spine specimens were obtained at 3, 6, and 12 months postoperatively for biomechanical, micro-CT, scanning electron microscopy coupled with energy dispersive spectroscopy, laser ablation-inductively coupled plasma-time-of-flight mass spectrometry, and histological analysis. The liver and kidney tissues were obtained for hematoxylin and eosin staining 12 months after surgery for biosafety analysis. Imaging and histological analysis showed a gradual improvement in interbody fusion over time; the fusion effect of the brushite-coated Mg-Nd-Zn-Zr alloy cage was comparable to that of the tricortical bone graft, and both were superior to that of the Mg-Nd-Zn-Zr alloy cage. Biomechanical testing showed that the brushite-coated Mg-Nd-Zn-Zr alloy cage achieved better stability than the tricortical bone graft at 12 months postoperatively. Micro-CT showed that the brushite coating significantly decreases the corrosion rate of the Mg-Nd-Zn-Zr alloy cage. In vivo degradation analysis showed higher Ca and P deposition in the degradation products of the brushite-coated Mg-Nd-Zn-Zr alloy cage, and no hyperconcentration of Mg was detected. Biocompatibility analysis showed that both cages were safe for cervical fusion surgery in goats. To conclude, the anatomical brushite-coated Mg-Nd-Zn-Zr alloy cage can promote cervical fusion in goats, and the brushite-coated Mg-Nd-Zn-Zr alloy is a potential material for developing absorbable fusion cages.