Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 219
Filter
1.
Ortho Sci., Orthod. sci. pract ; 17(65): 12-17, 2024. ilus
Article in Portuguese | BBO - Dentistry | ID: biblio-1556208

ABSTRACT

O palato é uma região considerada ideal para a inserção de dispositivos de ancoragem temporária (DAT's). É conhecido por possuir áreas com boa quantidade e qualidade óssea, longe das raízes dos dentes, com uma gengiva de boa qualidade, e dispor de um fácil acesso para uma correta instalação. O objetivo desse artigo é apresentar uma miniplaca palatina com mecânica originada na Coréia do Sul (BOS ­ Biocreative Orthodontic Strategy) como uma alternativa de ancoragem esquelética, por meio de um caso clínico e a demonstração de um passo a passo de sua instalação. Ela se mostra muito útil e eficiente em casos de distalização de molares superiores, mesialização ou intrusão dos mesmos. Por esta versatilidade, aqui no Brasil esta miniplaca recebe o nome de miniplaca palatina versátil (MPV). A MPV representa uma alternativa bastante eficaz em casos onde é necessário ancoragem esquelética sem incisão, se destacando em pontos como: simplicidade de instalação; estética; controle biomecânico; versatilidade e valor acessível. (AU)


The palate is a region considered ideal for the insertion of temporary anchorage devices (DAT's). It is known for having areas with good bone quantity and quality, away from the roots of the teeth, with good quality gums, and having easy access for correct installation. The objective of this article is to present a mini palatal plate with mechanics originated in South Korea (BOS ­ Biocreative Orthodontic Strategy) as an alternative for skeletal anchorage, through a clinical case and a step-by-step and the installation procedure. It proves to be very useful and efficient in cases of maxillary molar distalization, mesialization or intrusion of the same. Due to this versatility, here in Brazil this miniplate is called versatile mini-palatal plate (MPV). The MPV represents a very effective alternative in cases where skeletal anchorage without incision is required, standing out in points such as: simplicity of installation; aesthetics; biomechanical control; versatility and affordable value (AU)


Subject(s)
Palatal Expansion Technique , Suture Anchors , Malocclusion, Angle Class III
2.
Ortho Sci., Orthod. sci. pract ; 17(65): 56-64, 2024. ilus, tab
Article in Portuguese | BBO - Dentistry | ID: biblio-1556257

ABSTRACT

A expansão rápida do palato assistida por mini-implantes (Mini-Implant Assisted Rapid Palatal Expansion - MARPE) é uma alternativa para tratar a deficiência esquelética transversal da maxila em pacientes adultos. O objetivo deste relato de caso foi verificar, por meio de Tomografia Computadorizada de Feixe Cônico (TCFC), os possíveis incrementos dimensionais e volumétricos na via aérea superior (VAS) após a utilização deste dispositivo em uma paciente adulta com má oclusão de Classe III e atresia maxilar transversa. Método: Foi realizado um protocolo de disjunção palatina com o dispositivo MARPE. TCFC foram obtidas antes (T0) e logo após finalizar o procedimento de expansão óssea transversa da maxila (T1). Resultados: Ocorreram mudanças dimensionais significativas da VAS em T1, incluindo um aumento na largura (77,5%) e comprimento do espaço retropalatal (51%), bem como no espaço retrolingual (33,7%). Além disso, observou-se um aumento no volume total (41%) e no volume da orofaringe (51,9%) da VAS. Conclusão: Este relato destaca ganhos dimensionais significativos na VAS após o uso do MARPE, enfatizando sua eficácia como abordagem terapêutica que contribui para aumentos importantes na VAS.(AU)


The Mini-Implant Assisted Rapid Palatal Expansion (MARPE) is an alternative for treating maxillary skeletal transverse deficiency in adult patients. The aim of this case report was to verify, through Cone Beam Computed Tomography (CBCT), the possible dimensional and volumetric increments in the upper airway (UA) after using this device in an adult patient with Class III malocclusion and transverse maxillary atresia. Method: A palatal disjunction protocol was performed with the MARPE device. CBCT scans were obtained before (T0) and immediately after completing the maxillary bone expansion procedure (T1). Results: Significant dimensional changes occurred in the UA at T1, including an increase in width (77.5%) and length (51%) of the retropalatal space, as well as in the length of the retrolingual space (33.7%). Additionally, there was an increase in total volume (41%) and oropharyngeal volume (51.9%) of the UA. Conclusion: This report highlights significant dimensional gains in the UA following MARPE use, emphasizing its efficacy as a therapeutic approach that contributes to significant increases in UA dimensions.(AU)


Subject(s)
Humans , Female , Adult , Orthodontic Anchorage Procedures , Cone-Beam Computed Tomography , Malocclusion
3.
RFO UPF ; 27(1)08 ago. 2023. ilus
Article in Portuguese | LILACS, BBO - Dentistry | ID: biblio-1516329

ABSTRACT

Atualmente é evidente a demanda contínua por padrões de beleza, cada vez mais impecáveis, um sorriso alinhado e harmônico com dentes brancos para se sorrir com confiança. O tratamento odontológico interdisciplinar tem como intuito proporcionar uma boa saúde periodontal, restabelecer a estética e a função do sistema estomatognático. Objetivo: apresentar um relato de caso clínico envolvendo harmonização do sorriso como cirurgia plástica periodontal para alinhamento da margem gengival na região anterior e restaurações diretas em resina composta após a finalização do tratamento ortodôntico, evidenciando a importância da abordagem conservadora e multidisciplinar no âmbito do tratamento estético. Relato de caso: Realizamos o tratamento ortodôntico com aparelho autoligado cerâmico para alinhamento do arco dental e intrusão do elemento 13, em sequência executamos um recorte gengival nos elementos 12 e 22, clareamento dental associado após 15 dias, subsequentemente, reanatomização dentária no elemento 44 para que o elemento 13 não voltasse a extruir pela falta de contato oclusal, e por fim, remodelação dental fazendo uso de resina composta nos elementos 12, 21 e 22 devido a manchas de hipocalcificação dental. Conclusão: Contudo, a estética bucal tem a capacidade de possibilitar a melhoria na autoestima, devolvendo à função, proporcionando satisfação e bem-estar ao indivíduo, enaltecendo o sorriso.


Currently, the continuous demand for increasingly impeccable beauty standards is evident, an aligned and harmonic smile with white teeth to smile with confidence. Interdisciplinary dental treatment aims to provide good periodontal health, restore the aesthetics and function of the stomatognathic system. Objective: to present a clinical case report involving smile harmonization as periodontal plastic surgery for aligning the gingival margin in the anterior region and direct composite resin restorations after completion of orthodontic treatment, highlighting the importance of a conservative and multidisciplinary approach in the field of aesthetic treatment . Case report: We performed orthodontic treatment with a self-ligating ceramic appliance for aligning the dental arch and intruding element 13, then performed a gingival cutout on elements 12 and 22, associated tooth whitening after 15 days, subsequently, dental reanatomization on element 44 to that element 13 would not extrude again due to the lack of occlusal contact, and finally, dental remodeling using composite resin in elements 12, 21 and 22 due to dental hypocalcification stains. Conclusion: However, oral aesthetics has the ability to improve self-esteem, returning to function, providing satisfaction and well-being to the individual, enhancing the smile.


Subject(s)
Humans , Female , Adult , Orthodontics, Corrective/methods , Smiling , Esthetics, Dental , Treatment Outcome , Patient Satisfaction , Dental Restoration, Permanent/methods , Orthodontic Appliances, Fixed , Gingivectomy
4.
Dental press j. orthod. (Impr.) ; 28(4): e232338, 2023. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1514054

ABSTRACT

ABSTRACT Objective: This study was designed to analyze and compare the cusp and apex movements of the maxillary canines and first molars during canine retraction in the first step of extraction space closure, and to evaluate if these teeth follow a curvilinear (acceleration and/or deceleration) movement rate. Material and Methods: Twenty-five patients (23.3 ± 5.1 years of age) were enrolled. The retraction of the maxillary canines was accomplished using nickel-titanium closed coil springs (100gf) on 0.020-in stainless steel archwire. Oblique cephalograms were traced and superimposed on the anatomic best fit of the maxilla (before the retraction [T0], and after one month [T1], three [T3], five [T5] and seven [T7] months). Statistics was based in a normally distributed data. Multilevel procedures were used to derive polynomials for each of the measurements. Student's t-test and one-way repeated measures ANOVA were conducted. The level of significance of 5% was adopted. Results: Canine cusps and apexes did not follow a quadratic curve regarding horizontal movement (neither accelerate nor decelerate). Canine and molar cusps showed more horizontal movement than apexes (4.80 mm vs. 2.78 mm, and 2.64 mm vs. 2.17 mm, respectively). Conclusions: Canine did not accelerate or decelerate overtime horizontally; the cusps and apexes of the canines and molars showed more horizontal movement and larger rate at the beginning of canine retraction, followed by significantly smaller and constant movement rate after the first month.


RESUMO Objetivo: O objetivo deste estudo foi analisar a movimentação das cúspides e dos ápices de caninos e primeiros molares superiores durante a retração de caninos na primeira fase do fechamento do espaço pós-extração, e avaliar se esses dentes apresentam mudança na taxa de movimentação (aceleração e/ou desaceleração). Material e Métodos: Vinte e cinco pacientes (idade = 23,3 ± 5,1 anos) foram incluídos. A retração dos caninos superiores foi realizada com molas helicoidais fechadas de níquel-titânio (100gf) em arco 0,020" de aço inoxidável. Foram feitos traçados cefalométricos de telerradiografias oblíquas e sobrepostos ao melhor ajuste anatômico da maxila (antes da retração [T0]; após um mês [T1], três meses [T3], cinco meses [T5] e sete meses [T7]). A estatística foi baseada em dados com distribuição normal. Procedimentos multiníveis foram usados para derivar polinômios para cada uma das medidas. Teste t de Student e ANOVA de uma via para medidas repetidas foram realizados, adotando-se um nível de significância de 5%. Resultados: As cúspides e os ápices dos caninos não seguiram uma curva quadrática em relação ao movimento horizontal (sem aceleração ou desaceleração). As cúspides dos caninos e molares apresentaram mais movimento horizontal do que os ápices (4,80 mm vs. 2,78 mm e 2,64 mm vs. 2,17mm, respectivamente). Conclusões: A movimentação horizontal dos caninos não acelerou ou desacelerou ao longo do tempo; as cúspides e os ápices dos caninos e molares apresentaram maior movimento horizontal e maior taxa de movimentação no início da retração dos caninos, seguida por uma taxa de movimentação significativamente menor e constante após o primeiro mês.

5.
Dental press j. orthod. (Impr.) ; 28(4): e2322220, 2023. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1514056

ABSTRACT

ABSTRACT Objective: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. Methods: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. Results: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. Conclusions: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.


RESUMO Objetivo: O objetivo deste ensaio clínico randomizado foi avaliar e comparar, durante a primeira semana de expansão rápida da maxila (ERM), o impacto causado por dois tipos de aparelhos: Hyrax e Hyrax Híbrido. Métodos: Quarenta e dois pacientes que atendiam aos critérios de seleção (idade de 11 a 14 anos, com deficiência transversal da maxila, mordida cruzada posterior e presença de primeiros pré-molares e primeiros molares permanentes superiores) foram selecionados e divididos aleatoriamente em dois grupos: Grupo DOS (expansor dento-osseossuportado), tratado com Hyrax Híbrido (12 mulheres e 9 homens, idade média 13,3 ± 1,3 anos), e Grupo DS (expansor dentossuportado), tratado com Hyrax (5 mulheres e 16 homens, idade média de 13,3 ± 1,4 anos). A dor e o desconforto foram avaliados em dois momentos: após o primeiro dia de ativação (T1) e após quatro dias, por meio da escala de frequência numérica e do instrumento MFIQ (Questionário de Limitação Funcional Mandibular). A estatística descritiva e o teste de Mann-Whitney foram utilizados para comparação entre os grupos e entre os sexos. Adotou-se nível de significância de 5%. Resultados: Ambos os aparelhos tiveram impacto negativo, gerando dor e desconforto e reduzindo a capacidade funcional. No entanto, os escores obtidos foram de baixa intensidade e não foram observadas diferenças significativas entre os grupos. Considerando os sexos, houve diferenças estatisticamente significativas, com o sexo feminino apresentando maiores escores para dor e limitação funcional. Conclusões: Apesar de causar impacto na dor e aumento na limitação funcional, essas alterações foram de baixa intensidade, sem diferença estatística entre os grupos. As mulheres foram mais sensíveis ao impacto causado pela ERM.

6.
Dental press j. orthod. (Impr.) ; 28(5): e232388, 2023. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1520820

ABSTRACT

ABSTRACT Objective: The present study was conducted to investigate the effects of leukocyte-platelet-rich fibrin (L-PRF) on the rate of maxillary canine retraction for a period of 5 months. Methods: A split-mouth study was conducted on 16 subjects (9 males and 7 females; age range 17-25 years; mean age, 21.85±2.45 years) who required therapeutic extraction of bilateral maxillary first premolars. After the initial leveling and alignment, L-PRF plugs were placed in a randomly selected extraction socket (Experimental Group), and the other side served as a control (Control Group). Canine retraction was carried out by the activation of nickel-titanium (NiTi) closed-coil springs delivering 150 g of force. The rates of canine movement, canine rotation, tipping, root resorption, and molar movement were assessed at monthly intervals for five months (T0-T5). Pain, swelling and discomfort accompanying the procedure were assessed using a Likert scale. Results: The study revealed a significant increase in the rate of canine movement on the experimental side in the first two months, and significant molar anchorage loss was observed only in the first month for control side. There were no statistically significant differences between the groups regarding canine rotation, tipping, probing depth, root resorption, and pain perception. Conclusions: The use of L-PRF plugs in extraction sockets considerably enhanced the rate of canine movement only in the first two months, and long-term efficacy was not observed in this study.


RESUMO Objetivo: O presente estudo foi realizado para investigar os efeitos da fibrina rica em leucócitos e plaquetas (L-PRF) na taxa de retração do canino superior, durante um período de cinco meses. Métodos: Um estudo de boca dividida foi realizado em 16 indivíduos (9 homens e 7 mulheres; faixa etária de 17 a 25 anos; idade média de 21,85 ± 2,45 anos) que precisavam de extração terapêutica dos primeiros pré-molares superiores de ambos os lados. Após o nivelamento e o alinhamento iniciais, os plugs de L-PRF foram colocados em um alvéolo pós-extração, selecionado aleatoriamente (Grupo Experimental), e o outro lado serviu como controle (Grupo Controle). A retração do canino foi realizada pela ativação de molas fechadas de níquel-titânio (NiTi) com 150 g de força. As taxas de movimentação do canino, rotação, inclinação e reabsorção radicular do canino e movimentação do molar foram avaliadas em intervalos mensais durante cinco meses (T0-T5). A dor, o inchaço e o desconforto após o procedimento foram avaliados por meio de uma escala de Likert. Resultados: O estudo revelou um aumento significativo na taxa de movimentação do canino no lado experimental nos dois primeiros meses, e uma perda significativa de ancoragem do molar foi observada apenas no primeiro mês no lado controle. Não houve diferenças estatisticamente significativas entre os grupos, com relação à percepção da dor e rotação, inclinação, profundidade de sondagem e reabsorção radicular do canino. Conclusões: O uso de plugs de L-PRF em alvéolos pós-extração aumentou consideravelmente a taxa de movimentação do canino apenas nos dois primeiros meses, não sendo observada uma eficácia em longo prazo.

7.
Dental press j. orthod. (Impr.) ; 28(5): e2323183, 2023. tab
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1520822

ABSTRACT

ABSTRACT Introduction: Artificial Intelligence (AI) is a tool that is already part of our reality, and this is an opportunity to understand how it can be useful in interacting with patients and providing valuable information about orthodontics. Objective: This study evaluated the accuracy of ChatGPT in providing accurate and quality information to answer questions on Clear aligners, Temporary anchorage devices and Digital imaging in orthodontics. Methods: forty-five questions and answers were generated by the ChatGPT 4.0, and analyzed separately by five orthodontists. The evaluators independently rated the quality of information provided on a Likert scale, in which higher scores indicated greater quality of information (1 = very poor; 2 = poor; 3 = acceptable; 4 = good; 5 = very good). The Kruskal-Wallis H test (p< 0.05) and post-hoc pairwise comparisons with the Bonferroni correction were performed. Results: From the 225 evaluations of the five different evaluators, 11 (4.9%) were considered as very poor, 4 (1.8%) as poor, and 15 (6.7%) as acceptable. The majority were considered as good [34 (15,1%)] and very good [161 (71.6%)]. Regarding evaluators' scores, a slight agreement was perceived, with Fleiss's Kappa equal to 0.004. Conclusions: ChatGPT has proven effective in providing quality answers related to clear aligners, temporary anchorage devices, and digital imaging within the context of interest of orthodontics.


RESUMO Introdução: A Inteligência Artificial (IA) é uma ferramenta que já faz parte de nossa realidade, e esta é uma oportunidade de entendermos como ela pode ser útil na interação com os pacientes e no fornecimento de informações valiosas sobre Ortodontia. Objetivo: O objetivo deste estudo foi avaliar a precisão do ChatGPT em responder a perguntas sobre Alinhadores transparentes, Dispositivos de ancoragem temporária, e Imagens digitais em Ortodontia. Métodos: 45 perguntas e respostas foram geradas pelo ChatGPT 4.0 e analisadas separadamente por cinco ortodontistas que, de forma independente, avaliaram a qualidade das informações fornecidas, usando uma escala de Likert, na qual pontuações mais altas indicavam uma maior qualidade das informações (1 = muito ruim; 2 = ruim; 3 = aceitável; 4 = bom; 5 = muito bom). Aplicou-se o teste H de Kruskal-Wallis (p < 0,05) e comparações pareadas post-hoc com correção de Bonferroni. Resultados: Das 225 avaliações dos cinco avaliadores diferentes, 11 (4,9%) foram consideradas como muito ruins, 4 (1,8%) como ruins, e 15 (6,7%) como aceitáveis. A maioria foi considerada boa [34 (15,1%)] ou muito boa [161 (71,6%)]. Com relação às pontuações dos avaliadores, percebeu-se uma leve concordância, com o Kappa de Fleiss igual a 0,004. Conclusões: O ChatGPT mostrou eficácia em fornecer respostas de qualidade para questões relacionadas a Alinhadores transparentes, Dispositivos de ancoragem temporária e Imagens digitais.

8.
Dental press j. orthod. (Impr.) ; 28(3): e2321302, 2023. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1448116

ABSTRACT

ABSTRACT Objective: The aim of the study was to investigate the influence of facemask treatment with skeletal anchorage on the temporomandibular joint (TMJ) using magnetic resonance imaging (MRI), in patients with Class III malocclusion, accompanied by maxillary retrusion. Methods: Fifteen patients with a mean age of 12.1±1.43 years were included in the study. All patients were treated using facemask with skeletal anchorage after eight weeks of Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol. Magnetic resonance imaging was performed before and immediately after facemask treatment for TMJ evaluation. Disc position, condylar translation, degenerative changes of the condyles, and joint effusion were evaluated. To assess whether the alterations associated with the treatment were statistically significant, McNemar and marginal homogeneity tests were used. Results: After facemask treatment, a statistically significant change was observed in the disc position (an anterior disc displacement with/without reduction in five TMJs) (p<0.05). The alteration in the condylar translation was not statistically significant (p>0.05). This treatment did not cause degenerative changes of the condyles or effusion in any of the TMJs. Conclusion: Facemask treatment with skeletal anchorage following the Alt-RAMEC protocol had a minimal influence on the TMJ, only by means of disc position, which was not negligible. Long-term results of such treatment are required for following up the changes observed in the TMJs.


RESUMO Objetivo: O objetivo desse estudo foi investigar a influência do tratamento com máscara facial com ancoragem esquelética na articulação temporomandibular (ATM), por meio de ressonância magnética (RM), em pacientes com má oclusão de Classe III acompanhada de retrusão maxilar. Métodos: Quinze pacientes com idade média de 12,1±1,43 anos foram incluídos no estudo. Todos os pacientes foram tratados com máscara facial com ancoragem esquelética após oito semanas de protocolo de Expansão Rápida da Maxila e Constrição Alternadas (Alt-RAMEC). Os exames de ressonância magnética foram realizados antes e imediatamente após o tratamento com máscara facial, para avaliação da ATM. Foram avaliados posição do disco, translação condilar, alterações degenerativas dos côndilos e derrame articular. Os testes de McNemar e de homogeneidade marginal foram utilizados para avaliar se as alterações associadas ao tratamento foram estatisticamente significativas. Resultados: Após o tratamento com máscara facial, uma mudança estatisticamente significativa foi observada na posição do disco (deslocamento anterior do disco com/sem redução em cinco ATMs) (p<0,05). A alteração na translação condilar não foi estatisticamente significativa (p>0,05). Esse tratamento não causou alterações degenerativas dos côndilos ou derrame em qualquer das ATMs. Conclusão: O tratamento com máscara facial com ancoragem esquelética ápós o protocolo Alt-RAMEC teve uma influência mínima na ATM, apenas quanto à posição do disco, que não foi desprezível. Resultados em longo prazo desse tratamento são necessários para acompanhar as mudanças observadas nas ATMs.

9.
São Paulo; s.n; s.n; 2023. 131 p. tab, graf, ilus.
Thesis in Portuguese | LILACS | ID: biblio-1437606

ABSTRACT

myrsine coriacea (Sw.) R. Br. ex Roem. & Schult. (Primulaceae) conhecida popularmente como capororoquinha ou capororoca, é amplamente distribuída nas regiões sul e sudeste do Brasil. As espécies desse gênero apresentam um potencial antioxidante e anti-inflamatório, que pode ser acessado na busca de novos ativos para o tratamento de desordens pigmentares da pele. Desta forma, este trabalho teve como objetivos avaliar o potencial antitirosinase e antioxidante de extratos e frações de M. coriacea e identificar os possíveis compostos responsáveis por essas atividades. Foram realizados ensaios para avaliar o potencial antioxidante das amostras através do método do DPPH, enquanto a capacidade hipopigmentante das amostras foi avaliado pela inibição da enzima tirosinase. Como complemento, foram determinados os teores de compostos fenólicos totais e flavonoides através dos métodos colorimétricos empregando o reagente Folin-Ciocalteau e AlCl3. Adicionalmente, os extratos de M. coriacea tiveram avaliados seus potenciais citotóxicos utilizando diferentes linhagens tumorais humanas. O perfil fitoquímico de M. coriacea foi analisado por cromatografia a gás acoplada com espectrometria de massas (CG-EM) e cromatografia em camada delgada (CCD) com padrões. Nessas análises foram identificados 34 compostos, sendo o ácido palmítico e o palmitato de etila os compostos majoritários nas amostras de M. coriacea. O extrato bruto das folhas apresentou o maior teor de fenólicos totais, enquanto a fração de acetato de etila das folhas teve o maior teor de flavonoides. Contudo, o extrato bruto dos frutos apresentou a melhor atividade antioxidante de todas as amostras analisadas, apresentando também a melhor atividade antitirosinase. Dentre os compostos anotados, mandenol, ácido -linoleico e o linolenato de etila foram os compostos considerados como possíveis inibidores da tirosinase, com boa interação molecular com a enzima nas análises de ancoragem molecular in silico. Das amostras analisadas com relação a inibição de crescimento frente as células tumorais, a amostra da fração de clorofórmio das folhas foi a que apresentou potencial antitumoral frente as células de adenocarcinoma de cólon (HCT116)


myrsine coriacea (Sw.) R. Br. ex Roem. & Schult. (Primulaceae) popularly known as capororoquinha or capororoca, is widely distributed in southern and southeastern Brazil. Myrsine species have an antioxidant and anti-inflammatory potential, which can be accessed in the search for new actives for the treatment of skin pigmentation disorders. Thus, this work aimed to evaluate the antityrosinase and antioxidant potential from extracts and fractions of M. coriacea and to identify the probable compounds responsible for these activities. Assays were performed to evaluate the antioxidant potential of the samples using the DPPH method, while the hypopigmentation capacity of the samples was evaluated by the tyrosinase inhibition. As a complement, the amounts of total phenolic compounds and flavonoids were determined through colorimetric methods using the Folin-Ciocalteau reagent and AlCl3. Additionally, M. coriacea extracts had their cytotoxic potential evaluated using different human tumor cell lines. M. coriacea phytochemical profile was obtained by gas chromatography coupled with mass spectrometry (GC-MS) and thin layer chromatography (TLC) with standards. In these analyses, 34 compounds were identified, with palmitic acid and ethyl palmitate as the major compounds in M. coriacea samples. The leaf crude extract presented the highest total phenolics contents, while the leaf ethyl acetate fraction had the highest flavonoid amounts. However, the fruit crude extract showed the best antioxidant and antityrosinase activities of all analyzed samples. Among the annotated compounds, mandenol, -linoleic acid and ethyl linolenate were the compounds considered as putative tyrosinase inhibitors, presenting good molecular interaction with the enzyme active site in the in silico molecular docking analysis. The leaf chloroform fraction was the only sample that showed an antitumor potential against colon adenocarcinoma cells (HCT116)


Subject(s)
Monophenol Monooxygenase/analysis , Primulaceae/metabolism , Myrsine/classification , Fruit/classification , Antioxidants/analysis , Mass Spectrometry/methods , Skin Pigmentation/immunology , Chromatography, Thin Layer/methods , Hypopigmentation/pathology
10.
São Paulo; s.n; s.n; 2023. 153 p. tab, graf.
Thesis in Portuguese | LILACS | ID: biblio-1437804

ABSTRACT

Proteínas tirosina-fosfatase (PTPs) possuem papel fundamental na regulação da transdução de sinais e estão envolvidas em diversos processos fundamentais do ciclo celular. As Cdc25 (Cell Division Cycle 25) são fosfatases duais encontradas em todos os organismos eucarióticos e atuam em checkpoints do ciclo celular, permitindo ou inibindo o prosseguimento deste. Este grupo de proteínas pertence à classe de PTPs com atividade baseada em cisteína, apresenta domínio catalítico altamente conservado assim como o motivo catalítico, P-loop. Devido sua função, as Cdc25 são consideradas possíveis alvos terapêuticos para tratamento de câncer e sua interação com pequenas moléculas e inibidores tem sido investigada de forma que análises estruturais e de ligação das Cdc25 com inibidores podem elucidar aspectos importantes do mecanismo de ação destes além de direcionar para o desenho racional de fármacos. Interações cátion-π são interações intra ou intermoleculares não-covalentes que ocorrem entre uma espécie química catiônica, como o grupo guanidino de argininas, e uma das faces de um sistema π rico em elétrons, como dos anéis indólicos de triptofanos. Apesar de pouco discutidas na literatura, quando em comparação às interações não-covalentes mais convencionais, do ponto de vista energético as interações cátion-π são tão importantes na estruturação de proteínas quanto às ligações de hidrogênio ou pontes salinas. De fato estas interações são observadas com frequência em estruturas proteicas resolvidas. O domínio catalítico da Cdc25B possui diversas argininas expostas em sua superfície e um único resíduo de triptofano localizado na região C-terminal flexível, muito próximo do sítio catalítico da proteína. A flexibilidade de proteínas ou de regiões proteicas apresenta importante papel no reconhecimento entre biomoléculas participantes de vias de sinalização e tem sido muito estudada atualmente. Aqui, simulações de dinâmica molecular, experimentos de 1H-15N HSQC RMN, ensaios de cinética de inibição e de ancoragem molecular, evidenciam a existência de contatos cátion-π transientes na superfície de um importante membro da família das Cdc25, a Cdc25B, e de sítios de interação entre inibidores testados e a proteína com destaque a sítios na proximidades do P-loop, região próxima ao C-terminal desordenado, onde se demonstra estabilidade da interação com os pequenos ligantes


Protein tyrosine phosphatase (PTPs) play a fundamental role in the regulation of signal transduction and are involved in several fundamental processes of the cell cycle. Cdc25 (Cell Division Cycle 25) are dual phosphatases found in all eukaryotic organisms and act at checkpoints of the cell cycle, allowing or inhibiting its progression. This group of proteins belongs to the class of PTPs with cysteine-based activity, presenting a highly conserved catalytic domain as well as the catalytic motif, P-loop. Due to their function, Cdc25 are considered possible therapeutic targets for cancer treatment and their interaction with small molecules and inhibitors has been investigated so that structural and binding analyzes of Cdc25 with inhibitors can elucidate important aspects of their mechanism of action besides directing to rational drug design. Cation-π interactions are non-covalent intra- or intermolecular interactions that occur between a cationic chemical species, such as the guanidino group of arginines, and one of the faces of an electron-rich system, such as the indole rings of tryptophans. Although little discussed in the literature, when compared to more conventional non-covalent interactions, from the energetic point of view, cation-π interactions are as important in the structuring of proteins as hydrogen bonds or salt bridges. In fact, these interactions are frequently observed in solved protein structures. The catalytic domain of Cdc25B has several arginines exposed on its surface and a single tryptophan residue located in the flexible C-terminal region, very close to the catalytic site of the protein. The flexibility of proteins or protein regions plays an important role in the recognition between biomolecules participating in signaling pathways and has been extensively studied today. Here, molecular dynamics simulations, 1H-15N HSQC NMR experiments, inhibition kinetics and molecular anchoring assays, evidence the existence of transient cation-π contacts on the surface of an important member of the Cdc25 family, Cdc25B, and of sites of interaction between tested inhibitors and the protein, with emphasis on sites in the vicinity of the P-loop, a region close to the disordered C-terminus, where stability of the interaction with the small ligands is demonstrated


Subject(s)
cdc25 Phosphatases/analysis , Molecular Docking Simulation/methods , Molecular Dynamics Simulation/classification
11.
Dental press j. orthod. (Impr.) ; 28(2): e23spe2, 2023. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1439989

ABSTRACT

ABSTRACT Introduction: Class III malocclusion should be intercepted and treated at early age, to prevent the necessity of future complex and expensive procedures. The orthopedic facemask therapy has the goal to achieve skeletal changes, minimizing side effects on dentition. The use of skeletal anchorage, combined with Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol, may be effective in treating a greater number of growing Class III patients. Objective: To summarize the existing evidence-based literature on Class III malocclusion treatment in young adult patients, and to illustrate its application and effectiveness, by presenting an emblematic case report. Conclusion: The resolution of the present case, its long-term follow up, along with the studies conducted on a larger sample, demonstrate the effectiveness of the strategic combination of orthopedic and orthodontic treatments by using an hybrid rapid palatal expander and Alt-RAMEC protocol for treating Class III malocclusions in adult patients.


RESUMO Introdução: A má oclusão de Classe III deve ser interceptada e tratada em idade precoce, a fim de evitar uma futura necessidade de procedimentos complexos e invasivos. O tratamento com máscara facial ortopédica tem o objetivo de obter alterações esqueléticas, minimizando os efeitos colaterais na dentição. O uso de ancoragem óssea em mini-implantes, associada ao protocolo Alt-RAMEC (Alternate Rapid Maxillary Expansion and Constriction) pode ser eficaz no tratamento de um grande número de pacientes Classe III em crescimento. Objetivo: Realizar uma síntese da literatura baseada em evidência sobre o tratamento da má oclusão de Classe III em pacientes adultos jovens, e ilustrar sua aplicação e eficácia por meio do relato de um caso emblemático. Conclusão: A resolução e o acompanhamento em longo prazo do caso apresentado, juntamente com estudos conduzidos em uma amostra maior, demonstram a eficácia da combinação estratégica dos tratamentos ortopédico e ortodôntico usando um expansor palatal híbrido e o protocolo Alt-RAMEC para corrigir a má oclusão de Classe III em pacientes adultos.

12.
Braz. dent. sci ; 26(1): 1-9, 2023. tab, ilus
Article in English | BBO - Dentistry , LILACS | ID: biblio-1411432

ABSTRACT

Objective: to analyze the stress distribution in a 3D model that simulates second molar mesialization using two different types of mini-implants. Material and Methods: a mandible bone model was obtained by recomposing a computed tomography performed by a software program. The cortical and trabecular bone, a lower second molar, periodontal ligament, orthodontic tube, resin cement and the mini-implants were designed and modeled using the Rhinoceros 4.0 software program. The characteristics of self-drilling orthodontic mini-implants were: one with 7 mm length, 1 mm transmucosal neck section and 1.6 mm diameter and another with 5 mm length and 1.5 mm diameter. A total of 235.161 and 224.505 elements were used for the mesh. These models were inserted into the bone block and then subjected to loads of 200 cN (centinewton). The results were calculated and analyzed by the Ansys 17.0 software program for qualitative verification through displacement and maximum principal stress maps. Results: it was possible to observe that the periodontal ligament presented low displacement and stress values. However, the physiological values presented are among those capable to provide orthodontic movement, with compression and tensile area visualization staggered between 0.1 and -0.1 MPa (megapascal). Conclusion: within the limitations of the study, the mini-implants tested showed similar results where the load on the tooth allowed dental displacement (molar mesialization), with a tendency to rotate it, theoretically allowing the second molar to take the location of the first molar. (AU)


Objetivo: analisar a distribuição de tensões em um modelo 3D que simula a mesialização do segundo molar usando dois tipos diferentes de mini-implantes. Material e Métodos: um modelo de osso mandibular foi obtido por recomposição de uma tomografia computadorizada realizada por um software. O osso cortical e trabecular, um segundo molar inferior, ligamento periodontal, tubo ortodôntico, cimento resinoso e os mini-implantes foram projetados e modelados no software Rhinoceros 4.0. As características dos mini-implantes ortodônticos auto perfurantes foram: um com 7 mm de comprimento, 1 mm de secção transmucosa e 1,6 mm de diâmetro e outro com 5 mm de comprimento e 1,5 mm de diâmetro. Para a malha, foram utilizados 235.161 e 224.505 elementos. Esses modelos foram inseridos no bloco ósseo e então submetidos a cargas de 200 cN (centinewton). Os resultados foram calculados e analisados pelo software Ansys 17.0 para verificação qualitativa por meio de mapas de deslocamento e tensões máximas principais. Resultados: foi possível observar que o ligamento periodontal apresentou baixos valores de deslocamento e tensões. Porém, os valores fisiológicos apresentados são capazes de proporcionar movimentação ortodôntica, com visualização da área de compressão e tração escalonada entre 0,1 e -0,1 MPa (megapascal). Conclusão: dentro das limitações do estudo, os mini-implantes testados apresentaram resultados semelhantes onde a carga sobre o dente permitiu o deslocamento dentário (mesialização do molar), com tendência a girá-lo, permitindo teoricamente que o segundo molar ocupe do lugar do primeiro molar (AU)


Subject(s)
Tooth Avulsion , Dental Implants , Finite Element Analysis , Orthodontic Anchorage Procedures , Orthodontic Appliances, Fixed
13.
Ortho Sci., Orthod. sci. pract ; 16(61): 26-33, 2023. ilus
Article in Portuguese | BBO - Dentistry | ID: biblio-1452575

ABSTRACT

Resumo O objetivo deste trabalho é relatar o caso clínico de uma paciente de 21 anos, dolicofacial, classe II com impacção de incisivo lateral superior esquerdo e queixa de inclinação do plano oclusal em vista frontal do sorriso. O tratamento ortodôntico foi realizado com aparelho fixo da prescrição Roth e alinhamento e nivelamento com fios de NiTi. Ao chegar no fio retangular, um mini-implante interradicular foi instalado entre incisivo lateral e canino superior direito (dentes 12 e 13) como ancoragem para mecânica intrusiva nessa região. Ainda durante essa fase, foi realizada a extrusão do dente 23 para nivelamento da margem gengival em relação aos incisivos. Após 11 meses, a inclinação do plano oclusal em vista frontal sorrindo foi corrigida e iniciada a fase de finalização. Ao final do tratamento, foi realizada a reanatomização do dente 23 transformando-o em incisivo lateral, o que resultou em um sorriso estético e harmônico. Por meio desse caso clínico, conclui-se que a inclinação frontal do plano oclusal de origem dentoalveolar pode ser corrigida com a ajuda da ancoragem esquelética em casos onde haja boa exposição gengival na região anterior (AU)


Abstract The objective of this study is to report a clinical case of 21-year-old female, hyperdivergent Class II patient with impaction of the maxillary left lateral incisor and a complaint of inclination of the occlusal plane in a frontal view of the smile. Orthodontic treatment was performed with a Roth prescription fixed appliance and alignment and leveling with NiTi wires. Upon reaching the rectangular wire, an interradicular mini-implant was inserted between the maxillary right lateral incisor and the maxillary right canine (teeth 12 and 13) as an anchorage for intrusive mechanics in this region. Also, during this phase, the extrusion of tooth 23 was performed to level the gingival margin in relation to the incisors. After 11 months, the inclination of the occlusal plane in a smiling frontal view was corrected and the finishing phase began. At the end of the treatment, tooth 23 was re-anatomized, transforming it into a lateral incisor, which resulted in an aesthetic and harmonious smile. Through this clinical case, it is concluded that the frontal inclination of the occlusal plane of dentoalveolar origin can be corrected with the help of skeletal anchorage in cases where there is good gingival exposure in the anterior region. (AU)


Subject(s)
Humans , Adult , Orthodontics , Tooth, Impacted , Dental Occlusion , Orthodontic Anchorage Procedures
14.
Ortho Sci., Orthod. sci. pract ; 16(61): 34-43, 2023. ilus
Article in Portuguese | BBO - Dentistry | ID: biblio-1509239

ABSTRACT

Resumo Objetivo: Demonstrar a confecção de um hyrax híbrido apoiado em mini-implante, para o tratamento da classe III. Caso clínico: Paciente D. B. S, sexo masculino, 07 anos de idade, com mordida anterior de topo e mordida cruzada posterior unilateral direita, apinhamento leve nos incisivos inferiores, perda precoce decorrente de cárie dos elementos dentários 54 e 64 e atresia maxilar, contribuindo para a diminuição do perímetro do arco. Discussão: Em pacientes que possuem deficiência maxilar o tratamento deve englobar a estimulação e o direcionamento maxilar através de forças ortopédicas. A terapia com a Expansão Rápida da Maxila (ERM) em associação com a Máscara Facial (MF) é o tratamento mais habitual para a má oclusão classe III sendo utilizada para o tratamento da maxila retruída e também para que se acelere o crescimento maxilar. A utilização da ancoragem esquelética como forma de tratamento precoce da classe III resulta em efeitos ortopédicos fundamentalmente maiores se comparado com o tratamento convencional, desta forma, permite que não haja deslocamento dentário provocado pela força exercida durante a protração maxilar e evitando perda de espaço no perímetro do arco. Conclusão: a ancoragem esquelética vem ampliando as fronteiras dos tratamentos ortodônticos e ortopédicos, aumentando, com isso, a época de início da terapia sem efeitos dentários adversos, sendo a modificação de um hyrax convencional para um híbrido uma opção de melhor custo benefício e biológico. (AU)


Abstract Objective: To demonstrate the construction of a mini-implant-supported hybrid hyrax for the treatment of class III. Case report: Patient DB S, male, 07 years old, with upper anterior bite and right unilateral posterior crossbite, light crowding of the lower incisors, early loss due to caries of the teeth 54 and 64 and maxillary atresia, contributing to the decrease in the perimeter of the arch. Discussion: In patients who have maxillary deficiency, treatment should include maxillary stimulation and direction through orthopedic forces. Therapy with Rapid Maxillary Expansion (RME) in association with Facial Mask (MF) is the most common treatment for class III malocclusion and is used for the treatment of retruded maxilla and also to accelerate maxillary growth. The use of skeletal anchorage as a form of early class III treatment results in fundamentally greater orthopedic effects compared to conventional treatment, thus allowing for no tooth displacement caused by the force exerted during maxillary protraction and avoiding loss of space in the perimeter of the bow. Conclusion: skeletal anchorage has been expanding the frontiers of orthodontic and orthopedic treatments, thereby increasing the time to start therapy without adverse dental effects, with the modification of a conventional hyrax to a hybrid being a more cost-effective and biological option. (AU)


Subject(s)
Humans , Male , Child , Orthotic Devices , Orthodontic Anchorage Procedures , Malocclusion , Malocclusion, Angle Class III
15.
Ortho Sci., Orthod. sci. pract ; 16(62): 12-19, 2023. ilus, tab
Article in Portuguese | BBO - Dentistry | ID: biblio-1444682

ABSTRACT

Resumo Atualmente temos pacientes mais preocupados com a estética facial, e essa tem sido o principal motivo para a procura do tratamento ortodôntico, sendo a linha média facial um fator importante na análise morfológica do sorriso do ponto de vista estético. O desvio da linha média dentária atinge o complexo dentoalveolar, e ocorre quando existe um desequilíbrio entre os dentes e a base apical, do hemiarco direito e esquerdo ou entre os dentes superiores e os inferiores. A utilização de microparafusos como unidades de ancoragem, além de anular os efeitos colaterais indesejáveis, simplifica a mecânica ortodôntica, fornece uma maior previsibilidade ao resultado do tratamento, proporciona maior conforto e estética ao paciente, reduz o tempo de tratamento e possibilita a correção de casos com perdas dentárias, já que fornece uma ancoragem direta. O objetivo principal deste trabalho foi demonstrar através de um relato de caso clínico a correção da assimetria de desvio da linha média e uma melhor harmonia facial com a utilização de exodontias assimétricas de pré-molares e o uso de microparafusos ortodônticos de titânio como ancoragem (AU)


Abstract Currently, patients are more concerned with facial aesthetics, and this has been the main reason for seeking orthodontic treatment, with the facial midline being an important factor in the morphological analysis of the smile from an aesthetic point of view. Deviation from the dental midline affects the dentoalveolar complex, and occurs when there is an imbalance between the teeth and the apical base, of the right and left hemiarch or between the upper and lower teeth. The use of microscrews as anchorage units, in addition to canceling undesirable side effects, simplifies orthodontic mechanics, provides greater predictability of treatment results, provides greater comfort and aesthetics to the patient, reduces treatment time and allows for correction of cases with tooth loss, as it provides direct anchorage. The main objective of this work was to demonstrate, through a clinical case report, the correction of midline deviation asymmetry and better facial harmony with the use of asymmetric extraction of premolars and the use of titanium orthodontic microscrews as anchorage(AU)


Subject(s)
Humans , Female , Adult , Esthetics, Dental , Orthodontic Anchorage Procedures , Facial Asymmetry
16.
J. Health Biol. Sci. (Online) ; 10(1): 1-6, 01/jan./2022. tab, ilus
Article in English | LILACS | ID: biblio-1370924

ABSTRACT

Objective: to evaluate the molecular interaction of silibinin with the targets ALS3 and SAP5. Methodology: Molecular docking protocols were conducted to analyze the binding interaction of silibinin with ALS3 and SAP5. Results: Eleven interactions of ALS3 with silibinin and four with fluconazole were found, while six interactions were observed of SAP5 with silibinin and four with fluconazole. Conclusion: Molecular docking between silibinin and ALS3 identified important interactions, but no significant interactions were observed with SAP5, even though silibinin can exhibit affinity and interactions with other SAP5 sites.


Objetivo: Avaliar a interação molecular da silibinina com os alvos ALS3 e SAP5. Metodologia: Protocolos de docking molecular foram conduzidos para analisar a interação de ligação da silibinina com ALS3 e SAP5. Resultados: Foram encontradas onze interações de ALS3 com silibinina e quatro com fluconazol, enquanto seis interações foram observadas de SAP5 com silibinina e quatro com fluconazol. Conclusão: Docking molecular entre silibinina e ALS3 identificou interações importantes, mas não foram observadas interações significativas com SAP5, embora a silibinina possa apresentar afinidade e interações com outros sítios SAP5.


Subject(s)
Candida albicans , Silymarin , Proteins , Invasive Fungal Infections
17.
J. Health Biol. Sci. (Online) ; 10(1): 1-10, 01/jan./2022. tab, ilus
Article in English | LILACS | ID: biblio-1378456

ABSTRACT

Objective: This study aimed to evaluate the interactions of di- and tri-terpenes from Stillingia loranthacea with the enzyme NSP16-NSP10 of SARS-CoV-2, important for viral replication. Methods: The molecular docking technique was used to evaluate this interaction. Results: The analysis showed that the evaluated compounds obtained RMSD values of 0.888 to 1.944 Å and free energy of -6.1 to -9.4 kcal/mol, with the observation of hydrogen bonds, salt bridges, and pi-sulfur, pi-alkyl, and hydrophobic interactions. Conclusion: Thus, the results obtained show the potential of the compounds analyzed against the selected target. Since computer simulations are only an initial step in projects for the development of antiviral drugs, this study provides important data for future research.


Objetivo: avaliar as interações de di- e tri-terpenos de Stillingia loranthacea com a enzima NSP16-NSP10 de SARS-CoV-2, importante para a replicação viral. Métodos: A técnica de docking molecular foi utilizada para avaliar essa interação. Resultados: A análise mostrou que os compostos avaliados obtiveram valores de RMSD de 0,888 a 1,944 Å e energia livre de -6,1 a -9,4 kcal/mol, observando-se ligações de hidrogênio, pontes salinas e pi-enxofre, pi-alquil, e interações hidrofóbicas. Conclusão: Assim, os resultados obtidos mostram o potencial dos compostos analisados frente ao alvo selecionado. Como as simulações computacionais são apenas um passo inicial nos projetos de desenvolvimento de medicamentos antivirais, este estudo fornece dados importantes para pesquisas futuras.


Subject(s)
SARS-CoV-2 , Antiviral Agents , Terpenes , Virus Replication , Enzymes , Molecular Docking Simulation
18.
Subj. procesos cogn ; 26(1): 119-151, ago. 2022.
Article in Spanish | LILACS, UNISALUD, BINACIS | ID: biblio-1392729

ABSTRACT

Las Representaciones Sociales son un conjunto de conocimientos, opiniones e imágenes que nos permiten evocar un evento, persona u objeto en particular. Estas representaciones son el resultado de la interacción social, que son comunes a un determinado grupo de individuos. El representante principal de la Teoría de las Representaciones Sociales es Serge Moscovici. Este artículo tiene como objetivo discutir la Representación Social a partir de una revisión de la literatura sobre la a) Historia de la Psicología Social y de las Representaciones Sociales; b) Teoría de las Representaciones Sociales como una forma de conocerse a sí mismo; c) Representación social, historia y memoria colectiva del sujeto; d) Objetivación y anclaje: la dinámica sociocognitiva de las representaciones sociales; e) La Teoría de las Representaciones Sociales como metodología de investigación; y f) Teoría de las Representaciones Sociales y la superación de algunas dicotomías AU


As Representações Sociais são oconjunto de conhecimentos, opiniões e imagens que nos permitem evocar um determinado acontecimento, pessoa ou objeto. Essas representações são o resultado da interação social, que são comuns aum determinado grupo de indivíduos. O principal representante da Teoria das Representações Sociais é Serge Moscovici. Este artigo tem como objetivo discorrer sobre a Representacao Social a partir de uma revisão da literatura sobre a) História da Psicologia Social e Representações Sociais; b) Teoria das Representações Sociais como forma de se conhecer; c) Representação social, história e memória coletiva do sujeito; d) Objetivação e ancoragem: a dinâmica sociocognitiva das representações sociais; e) A Teoria das Representações Sociais como metodologia de pesquisa; e f) Teoria das Representações Sociais e superação de algumas dicotomias AU


Social Representations are the set of knowledge, opinions and images that allow us to evoke a particular event, person or object. These representations are the result of social interaction, which are common to a certain group of individuals. The main representative of the Theory of Social Representations is Serge Moscovici. This article aims to discuss Social Representation from a literature reviewon a) History of Social Psychology and Social Representations; b) Theory of Social Representations as a way of getting to know each other; c) Social representation, history and collective memory of the subject; d) Objectification and anchoring: the socio-cognitive dynamics of social representations; e) The Theory of Social Representations as a research methodology; and f) Theory of Social Representations and overcoming some dichotomies AU


Subject(s)
Review Literature as Topic , Social Representation/methods , Psychology, Social/history , Social Cognition
19.
Dental press j. orthod. (Impr.) ; 27(5): e222190, 2022. tab, graf
Article in English | LILACS-Express | LILACS, BBO - Dentistry | ID: biblio-1404496

ABSTRACT

ABSTRACT Objective: To investigate the influence of dynamic visualization of cone beam computed tomography (CBCT) scans on orthodontist's assessment of positioning status and prognosis of interradicular mini-implants (MI). Methods: Three MI positions were virtually simulated in thirty CBCT volumes: (1) MI 1 mm from the lamina dura (LD), (2) MI touching the LD and (3) MI overlapping the LD. Each position was exposed to orthodontists (n = 35) as panoramic reconstruction, sagittal reconstruction and a sequence of axial slices. Each orthodontist evaluated the MI position (relationship with the LD) and scored the prognosis using a four-point scale (the higher the score, the better the prognosis). Kappa, Friedman and Nemenyi statistics were used. Results: Statistically significant associations were detected between the prognosis scores and the type of image visualized (p<0.05). The dynamic visualization of the CBCT volume (axial slices) was associated with higher scores for prognosis and more reliable evaluation of MI positioning. Inconsistent outcomes were more frequently associated with panoramic and sagittal reconstructions. Conclusion: The dynamic visualization of axial slices allowed orthodontists to perform better assessment of MI position and considerably affected prognosis judgment.


RESUMO Objetivo: Analisar se a avaliação dinâmica de volumes de tomografia computadorizada de feixe cônico (TCFC) influencia a percepção de ortodontistas quanto à determinação da posição e do prognóstico de mini-implantes (MIs) inter-radiculares. Material e Métodos: Foram selecionados 30 volumes de TCFC, nos quais foram simuladas três formas de instalação de MIs: 1) MI a 1 mm de distância da lâmina dura (LD); 2) MI tocando a LD; e 3) MI sobreposto à LD. As imagens foram examinadas por 35 ortodontistas na forma de reconstruções panorâmicas, reconstruções sagitais e uma sequência de reconstruções axiais. Os examinadores avaliaram a relação entre o MI e a LD, e indicaram o prognóstico dos MIs instalados, usando uma escala de 4 pontos (quanto maior o escore, mais favorável o prognóstico). Os dados foram submetidos à análise estatística, por meio dos testes de Kappa, Friedman e Nemenyi. Resultados: Houve associação significativa entre o prognóstico, os tipos de imagem e as três formas de inserção dos MIs (p<0,05). A visualização dinâmica dos volumes de TCFC (reconstruções axiais) foi associada a maiores escores para o prognóstico e a avaliações mais confiáveis da posição dos MIs. Escores mais inconsistentes e discordantes foram mais associados às reconstruções panorâmicas e sagitais. Conclusão: A análise do volume tomográfico em reconstruções axiais pode melhorar a avaliação do ortodontista quanto à posição dos MIs inter-radiculares, apresentando impacto significativo na determinação do prognóstico do caso.

20.
Braz. dent. sci ; 25(3): 1-8, 2022. tab, ilus
Article in English | LILACS, BBO - Dentistry | ID: biblio-1378432

ABSTRACT

Objetivo: O objetivo deste estudo é avaliar sistematicamente as evidências disponíveis para recidiva do tratamento da mordida aberta esquelética usando dispositivos de ancoragem temporária e cirurgia ortognática. Material e Métodos: Cinco bases de dados eletrônicas como MEDLINE, COCHRANE, SCIELO, GOOGLE SCHOLAR, EMBASE foram pesquisadas sistematicamente até junho de 2020. Os estudos de qualidade metodológica foram classificados por meio da Ferramenta de Avaliação de Qualidade do Projeto de Práticas de Saúde Pública Eficazes (EPHPP). Resultados: No total, 1.005 estudos foram identificados para triagem e 6 estudos foram elegíveis. O instrumento de avaliação da qualidade apresentou qualidade moderada para todos os estudos. A correção imediata pós-tratamento da mordida aberta foi melhor nos estudos cirúrgicos do que nos estudos tratados com TADs. Conclusão: A estabilidade dos resultados do tratamento da mordida aberta anterior foi comparável nos casos tratados em ambas as modalidades de tratamento. A recidiva da mordida aberta anterior foi associada a casos em que a sobremordida pós-tratamento foi mínima. A sobremordida parece ser mais estável quando apenas a maxila foi operada do que com cirurgias bimaxilares. A rotação anti-horária da mandíbula com subsequente redução da altura facial anterior foi melhor na correção cirúrgica do que através de TADs (AU)


Objective: The purpose of this study is to systematically assess the available evidence for relapse of skeletal open bite treatment using temporary anchorage devices and orthognathic surgery. Materials and Methods: Five electronic databases such as MEDLINE, COCHRANE, SCIELO, GOOGLE SCHOLAR, EMBASE were systematically searched up to June 2020. Methodological quality studies were graded by means of the Effective Public Health Practice Project (EPHPP) Quality Assessment Tool. Results: In total, 1005 studies were identified for screening, and 6 studies were eligible. The quality assessment tool showed moderate quality for all the studies. The immediate post treatment correction of open bite was better in the surgical studies than in the studies treated with TADs. Conclusion: Stability of treatment results of anterior openbite was comparable in cases treated in both the treatment modalities. Relapse of anterior open bite was associated with cases in which the posttreatment overbite was minimal. Overbite seems to be more stable when only the maxilla has been operated on than with bi-maxillary surgeries. Counterclockwise rotation of the mandible with subsequent reduction of anterior facial height was better in surgical correction than through TADs. (AU)


Subject(s)
Surgery, Oral , Open Bite , Suture Anchors , Orthognathic Surgery
SELECTION OF CITATIONS
SEARCH DETAIL
...