Optimizing chitosan derived from Metapenaeus affinis: a novel anti-biofilm agent against Pseudomonas aeruginosa.

Pseudomonas aeruginosa is a commonly found Gram-negative bacterium in healthcare facilities and is renowned for its ability to form biofilms and its virulence factors that are controlled by quorum sensing (QS) systems. The increasing prevalence of multidrug-resistant strains of this bacterium poses a significant challenge in the field of medicine. Consequently, the exploration of novel antimicrobial agents has become a top priority. This research aims to optimize chitosan derived from white shrimp (Metapenaeus affinis) using the Response Surface Methodology (RSM) computational approach. The objective is to investigate chitosan's potential as a solution for inhibiting QS activity and biofilm formation in P. aeruginosa ATCC 10,145. Under optimized conditions, chitin was treated with NaOH (1.41 M) for 15.75 h, HCl (7.49% vol) for 2.01 h, and at a deacetylation temperature of 81.15 °C. The resulting chitosan exhibited a degree of deacetylation (DD%) exceeding 93.98%, as confirmed by Fourier-transform infrared (FTIR) spectral analysis, indicating its high purity. The extracted chitosan demonstrated a significant synergistic antibiotic effect against P. aeruginosa when combined with ceftazidime, enhancing its bactericidal activity by up to 15-fold. In addition, sub-MIC (minimum inhibitory concentration) concentrations of extracted chitosan (10 and 100 µg/mL) successfully reduced the production of pyocyanin and rhamnolipid, as well as the swimming motility, protease activity and biofilm formation ability in comparison to the control group (P < 0.05). Moreover, chitosan treatment downregulated the RhlR and LasR genes in P. aeruginosa when compared to the control group (P < 0.05). The optimized chitosan extract shows significant potential as a coating agent for surgical equipment, effectively preventing nosocomial infections caused by P. aeruginosa pathogens.

Structure-based chemical ontology improves chemometric prediction of antibacterial essential oils.

Plants are valuable resources for drug discovery as they produce diverse bioactive compounds. However, the chemical diversity makes it difficult to predict the biological activity of plant extracts via conventional chemometric methods. In this research, we propose a new computational model that integrates chemical composition data with structure-based chemical ontology. For a model validation, two training datasets were prepared from literature on antibacterial essential oils to classify active/inactive oils. Random forest classifiers constructed from the data showed improved prediction performance in both test datasets. Prior feature selection using hierarchical information criterion further improved the performance. Furthermore, an antibacterial assay using a standard strain of Staphylococcus aureus revealed that the classifier correctly predicted the activity of commercially available oils with an accuracy of 83% (= 10/12). The results of this study indicate that machine learning of chemical composition data integrated with chemical ontology can be a highly efficient approach for exploring bioactive plant extracts.

Application of metal-organic frameworks in infectious wound healing.

Metal-organic frameworks (MOFs) are metal-organic skeleton compounds composed of self-assembled metal ions or clusters and organic ligands. MOF materials often have porous structures, high specific surface areas, uniform and adjustable pores, high surface activity and easy modification and have a wide range of prospects for application. MOFs have been widely used. In recent years, with the continuous expansion of MOF materials, they have also achieved remarkable results in the field of antimicrobial agents. In this review, the structural composition and synthetic modification of MOF materials are introduced in detail, and the antimicrobial mechanisms and applications of these materials in the healing of infected wounds are described. Moreover, the opportunities and challenges encountered in the development of MOF materials are presented, and we expect that additional MOF materials with high biosafety and efficient antimicrobial capacity will be developed in the future.

NIR-responsive electrospun nanofiber dressing promotes diabetic-infected wound healing with programmed combined temperature-coordinated photothermal therapy.

BACKGROUND: Diabetic wounds present significant challenges, specifically in terms of bacterial infection and delayed healing. Therefore, it is crucial to address local bacterial issues and promote accelerated wound healing. In this investigation, we utilized electrospinning to fabricate microgel/nanofiber membranes encapsulating MXene-encapsulated microgels and chitosan/gelatin polymers. RESULTS: The film dressing facilitates programmed photothermal therapy (PPT) and mild photothermal therapy (MPTT) under near-infrared (NIR), showcasing swift and extensive antibacterial and biofilm-disrupting capabilities. The PPT effect achieves prompt sterilization within 5 min at 52 °C and disperses mature biofilm within 10 min. Concurrently, by adjusting the NIR power to induce local mild heating (42 °C), the dressing stimulates fibroblast proliferation and migration, significantly enhancing vascularization. Moreover, in vivo experimentation successfully validates the film dressing, underscoring its immense potential in addressing the intricacies of diabetic wounds. CONCLUSIONS: The MXene microgel-loaded nanofiber dressing employs temperature-coordinated photothermal therapy, effectively amalgamating the advantageous features of high-temperature sterilization and low-temperature promotion of wound healing. It exhibits rapid, broad-spectrum antibacterial and biofilm-disrupting capabilities, exceptional biocompatibility, and noteworthy effects on promoting cell proliferation and vascularization. These results affirm the efficacy of our nanofiber dressing, highlighting its significant potential in addressing the challenge of diabetic wounds struggling to heal due to infection.

New flavanone and other constituents from erythrina senegalensis A. DC. (fabaceae).

The chemical investigation of the methanol trunk bark extract of Erythrina senegalensis led to the isolation of a new flavanone, 5,7,4'-trihydroxy-3',5'-bis(3-methylbutadienyl)flavanone (trivially named senegalensisnone) (1), together with seven known compounds, abyssinone-V-4'-O-methyl ether (2), abyssinone V (3), Calopocarpin (4), genistein (5) mixture of stigmasterol (6) and ß-sitosterol (7) and ß-sitosterol-3-O-ß-D-glucopyranoside (8). The structures of the isolates were elucidated by extensive spectroscopic and spectrometric analyses (1D and 2D NMR, ESI-MS) and by comparison with previously reported data. The absolute configuration of 1 was deduced based on comparison of its experimental CD with that of similar compound. All the compounds were tested for their antibacterial, antifungal and antioxidant activities. Compound 4 displayed weak antibacterial activity against Salmonella enteritidis with MIC value of 62.5 µg/mL. All the isolates were found to be inactive as antioxidant agents in the DPPH, ABTS and FRAP assays.

Recent advances in the development of bacterial response regulators inhibitors as antibacterial and/or antibiotic adjuvant agent: A new approach to combat bacterial resistance.

The number of new antibacterial agents currently being discovered is insufficient to combat bacterial resistance. It is extremely challenging to find new antibiotics and to introduce them to the pharmaceutical market. Therefore, special attention must be given to find new strategies to combat bacterial resistance and prevent bacteria from developing resistance. Two-component system is a transduction system and the most prevalent mechanism employed by bacteria to respond to environmental changes. This signaling system consists of a membrane sensor histidine kinase that perceives environmental stimuli and a response regulator which acts as a transcription factor. The approach consisting of developing response regulators inhibitors with antibacterial activity or antibiotic adjuvant activity is a novel approach that has never been previously reviewed. In this review we report for the first time, the importance of targeting response regulators and summarizing all existing studies carried out from 2008 until now on response regulators inhibitors as antibacterial agents or / and antibiotic adjuvants. Moreover, we describe the antibacterial activity and/or antibiotic adjuvants activity against the studied bacterial strains and the mechanism of different response regulator inhibitors when it's possible.

Relevance of genetic causes and environmental adaptation of Cronobacter spp. isolated from infant and follow-up formula production factories and retailed products in China: A 7-year period of continuous surveillance based on genome-wide analysis.

The possible contamination routes, environmental adaptation, and genetic basis of Cronobacter spp. in infant and follow-up formula production factories and retailed products in mainland China have been determined by laboratory studies and whole-genome comparative analysis in a 7-year nationwide continuous surveillance spanning from 2012 to 2018. The 2-year continuous multicenter surveillance of the production process (conducted in 2013 and 2014) revealed that the source of Cronobacter spp. in the dry-blending process was the raw dry ingredients and manufacturing environment (particularly in the vibro sieve and vacuum cleaner), while in the combined process, the main contamination source was identified as the packing room. It is important to note that, according to the contamination control knowledge obtained from the production process surveillance, the contamination rate of retail powdered infant formula (PIF) and follow-up formula (FUF) products in China decreased significantly from 2016 onward, after improving the hygiene management practices in factories. The prevalence of Cronobacter spp. in retailed PIF and FUF in China in 2018 was dramatically reduced from 1.55 % (61/3925, in 2012) to an average as low as 0.17 % (13/7655 in 2018). Phenotype determination and genomic analysis were performed on a total of 90 Cronobacter spp. isolates obtained from the surveillance. Of the 90 isolates, only two showed resistance to either cefazolin or cefoxitin. The multilocus sequence typing results revealed that C. sakazakii sequence type 1 (ST1), ST37, and C. malonaticus ST7 were the dominant sequence types (STs) collected from the production factories, while C. sakazakii ST1, ST4, ST64, and ST8 were the main STs detected in the retailed PIF and FUF nationwide. One C. sakazakii ST4 isolate (1.1 %, 1/90) had strong biofilm-forming ability and 13 isolates (14.4 %, 13/90) had weak biofilm-forming ability. Genomic analysis revealed that Cronobacter spp. have a relatively stable core-genome and an increasing pan-genome size. Plasmid IncFIB (pCTU3) was prevalent in this genus and some contained 14 antibacterial biocide- and metal-resistance genes (BMRGs) including copper, silver, and arsenic resistant genes. Plasmid IncN_1 was predicted to contain 6 ARGs. This is the first time that a multi-drug resistance IncN_1 type plasmid has been reported in Cronobacter spp. Genomic variations with respect to BMRGs, virulence genes, antimicrobial resistance genes (ARGs), and genes involved in biofilm formation were observed among strains of this genus. There were apparent differences in copies of bcsG and flgJ between the biofilm-forming group and non-biofilm-forming group, indicating that these two genes play key roles in biofilm formation. The findings of this study have improved our understanding of the contamination characteristics and genetic basis of Cronobacter spp. in PIF and FUF and their production environment in China and provide important guidance to reduce contamination with this pathogen during the production of PIF and FUF.

Modified chitosan: Insight on biomedical and industrial applications.

Chitosan (CS), a by -product of chitin deacetylation can be useful in a broad range of purposes, to mention agriculture, pharmaceuticals, material science, food and nutrition, biotechnology and of recent, in gene therapy. Chitosan is a highly desired biomolecule due to the existence of many sensitive functional groups inside the molecule and also because of its net cationicity. The latter provides flexibility for creating a wide range of derivatives for particular end users across various industries. This overview aims to compile some of the most recent research on the bio-related applications that chitosan and its derivatives can be used for. However, chitosan's reactive functional groups are amendable to chemical reaction. Modifying the material to show enhanced solubility, a greater range of application options and pH-sensitive targeting and others have been a major focus of chitosan research. This review describes the modifications of chitosan that have been made to improve its water solubility, pH sensitivity, and capacity to target chitosan derivatives. Applying the by-products of chitosan as antibacterial, in targeting, extended release and as delivery systems is also covered. The by-products of chitosan will be important and potentially useful in developing new biomedical drugs in time to come.

Nationwide Analysis of Antimicrobial Prescription in Korean Hospitals between 2018 and 2021: The 2023 KONAS Report.

BACKGROUND: Data on antimicrobial use at the national level are crucial for establishing domestic antimicrobial stewardship policies and enabling medical institutions to benchmark each other. This study aimed to analyze antimicrobial use in Korean hospitals. MATERIALS AND METHODS: We investigated antimicrobials prescribed in Korean hospitals between 2018 and 2021 using data from the Health Insurance Review and Assessment. Primary care hospitals (PCHs), secondary care hospitals (SCHs), and tertiary care hospitals (TCHs) were included in this analysis. Antimicrobials were categorized according to the Korea National Antimicrobial Use Analysis System (KONAS) classification, which is suitable for measuring antimicrobial use in Korean hospitals. RESULTS: Among over 1,900 hospitals, PCHs constituted the highest proportion, whereas TCHs had the lowest representation. The most frequently prescribed antimicrobials in 2021 were piperacillin/ß-lactamase inhibitor (9.3%) in TCHs, ceftriaxone (11.0%) in SCHs, and cefazedone (18.9%) in PCHs. Between 2018 and 2021, the most used antimicrobial classes according to the KONAS classification were 'broad-spectrum antibacterial agents predominantly used for community-acquired infections' in SCHs and TCHs and 'narrow spectrum beta-lactam agents' in PCHs. Total consumption of antimicrobials decreased from 951.7 to 929.9 days of therapy (DOT)/1,000 patient-days in TCHs and 817.8 to 752.2 DOT/1,000 patient-days in SCHs during study period; however, no reduction was noted in PCHs (from 504.3 to 527.2 DOT/1,000 patient-days). Moreover, in 2021, the use of reserve antimicrobials decreased from 13.6 to 10.7 DOT/1,000 patient-days in TCHs and from 4.6 to 3.3 DOT/1,000 patient-days in SCHs. However, in PCHs, the use increased from 0.7 to 0.8 DOT/1,000 patient-days. CONCLUSION: This study confirmed that antimicrobial use differed according to hospital type in Korea. Recent increases in the use of total and reserve antimicrobials in PCHs reflect the challenges that must be addressed.

High Hydrophilic and Antibacterial Efficient UV-Curable Silicone-Containing Choline Chloride Quaternary Ammonium Salts Functionalized Materials.

Antibacterial materials with high hydrophobicity have drawbacks such as protein adsorption, bacterial contamination, and biofilm formation, which are responsible for some serious adverse health events. Therefore, antibacterial materials with high hydrophilicity are highly desired. In this paper, UV-curable antibacterial materials are prepared from silicone-containing Choline chloride (ChCl) functionalized hyperbranched quaternary ammonium salts (QAS) and tri-hydroxylethyl acrylate phosphate (TAEP). The materials show high hydrophilic performance because their water contact angle is as low as 19.3°. The materials also exhibit quite high antibacterial efficiency against S. aureus over 95.6%, fairly high transmittance over 90%, and good mechanical performance with tensile strength as high as 6.5 MPa. It reveals that it is a feasible strategy to develop antibacterial materials with low hydrophobicity from silicone-modified ChCl-functionalized hyperbranched QAS.

Fruit Extract and Phenolic Compounds of Phyllanthus emblica Fruits as Bioactivity Enhancer of Chloramphenicol Against Bacterial Species.

Phyllanthus emblica L. (syn. Emblica officinalis) fruits have been traditionally exploited to enhance the immune system and provide protection against bacterial and fungal diseases. The present study aimed to evaluate the synergistic interactions between chloramphenicol and several phenolic compounds found in P. emblica fruits against bacterial strains. The combination of P. emblica fruit extracts and its phenolic compounds demonstrated synergistic antibacterial activity when used in conjunction with chloramphenicol against both Gram-positive and Gram-negative bacteria. The combination of MICGA with ½MICChl exhibited a significant increase in bioactivity, with a 333.33-fold enhancement against B. subtilis. Similarly, the combination of MICGA with 2MICChl displayed a bioactivity enhancement of 16.02 folds against S. aureus. The co-administration of ½MICQ and ½MICChl resulted in a significant 35.71-fold increase in bioactivity against P. aeruginosa. Similarly, the combination of MIC GA and ½MICChl exhibited a remarkable 166.66-fold enhancement in bioactivity against E. coli. The combinations of 2MICFPE and ½MICChloramphenicol, as well as ½MICGA and ½MICChl demonstrated the highest bioactivity enhancement of 17.85 folds for K. pneumoniae. This study claimed that the fruit extracts of P. emblica and its phenolic compounds could be utilized to augment the effectiveness of conventional antibiotics, which have acquired resistance to bacterial infections.

Valorization of sesame seed coat waste: phenolic composition, antibacterial efficacy, and nanoemulsion encapsulation for food preservation.

The study highlighted the potential of sesame seed coat (SSC), typically discarded during sesame paste processing, as a valuable resource for valorization through extracting bioactive compounds. It examined the phenolic composition and antioxidant activity of SSC, and evaluated its antibacterial properties against foodborne pathogens such as Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella Typhimurium. Additionally, SSC underwent nanoemulsion coating, analyzed using dynamic light scattering and scanning electron microscopy, to enhance its application as a natural preservative. The research specifically focused on incorporating SSC nanoemulsion into milk to determine its effectiveness as a preservative. SSC demonstrated considerable antioxidant activity and phenolic content, with catechin identified as the predominant polyphenol. GC-MS analysis revealed seven major compounds, led by oleic acid. Notably, SSC effectively inhibited L. monocytogenes in broth at 100 mg/ml. The application of SSC and its nanoemulsion resulted in changes to bacterial morphology and a significant reduction in bacterial counts in milk, highlighting its potential as an effective natural antibacterial agent. The findings of this study highlight the potential use of SSC as a valuable by-product in the food industry, with significant implications for food preservation.

Preparation and characterization of tea tree essential oil microcapsule-coated packaging paper with bacteriostatic effect.

We prepared tea tree essential oil microcapsules, and the microcapsules and pullulan were coated on kraft paper to prepare an antibacterial paper. The antibacterial activity, structural characterization, and thermal stability of the prepared microcapsules and packaging paper were then tested. We found that the retention rate of microcapsules reached 87.1% after a 70 min of high-temperature treatment. The minimum inhibitory concentrations of microcapsules to S. aureus and E. coli were 112 mg/mL and 224 mg/mL, and the bacteriostatic zones of the packaging paper to E. coli and S. aureus were 17.49 mm and 22.75 mm, respectively. The prepared microcapsules were irregular. The paper coating was formed via hydrogen bonding, which filled the pores of paper fibers. When compared with the base paper, the roughness of the paper was reduced to 7.16 nm (Rq) and 5.61 nm (Ra), and no thermal decomposition occurred at <288 °C, which together implies a good application prospect.

Synthesis, pharmacological evaluation, and in silico study of new 3-furan-1-thiophene-based chalcones as antibacterial and anticancer agents.

New 3-furan-1-thiophene-based chalcones were synthesized, characterized and pharmacologically evaluated as antibacterial and anticancer agents against two bacterial species; Gram-positive (Streptococcus pyogenes) and Gram-negative (Pseudomonas aeruginosa). All tested final compounds were active against the two bacterial species; S. pyogenes and P . aeruginosa. Especially compound AM4 showed large inhibition zone (27.13 and 23.30 mm), respectively. Using the DPPH assay, the new chalcones were evaluated for their free radical scavenging activity and found to reach up to 90 %, accomplished at a test concentration of 200 µg/mL. Furthermore, the chalcone derivatives were investigated against two breast cell lines; MCF-7 (cancerous) and MCF-10A (non-cancerous). Compound AM4 showed potent anticancer activity (IC50 = 19.354 µg/mL) in comparison to the other tested chalcone derivatives. In silico study was achieved using the PyRx AutoDock Vina software (0.8) to study the interaction types between the new hits and the binding sites of targeted proteins; glucosamine-6-phosphate synthase and tubulin, the target for antibacterial and anticancer drugs, respectively. Based on the molecular docking results the tested chalcones bind to the active pocket of the respective proteins, which support the in vitro results. In conclusion, 3-furan-1-thiophene-based chalcones could serve as new hits in the discovery of novel anticancer and/or antibacterial drugs.

Facile fabrication of linezolid/strontium coated hydroxyapatite/graphene oxide nanocomposite for osteoporotic bone defect.

Hydroxyapatite (HAp) coatings currently have limited therapeutic applications because they lack anti-infection, osteoinductivity, and poor mechanical characteristics. On the titanium substrate, electrochemical deposition (ECD) was used to construct the strontium (Sr)-featuring hydroxyapatite (HAp)/graphene oxides (GO)/linezolid (LZ) nanomaterial coated with antibacterial and drug delivery properties. The newly fabricated nanomaterials were confirmed by X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis and morphological features were examined by scanning electron microscope (SEM) analysis. The results reveal multiple nucleation sites for SrHAp/GO/LZ composite coatings due to oxygen-comprising moieties on the 2D surface of GO. It was shown to be favorable for osteoblast proliferation and differentiation. The elastic modulus and hardness of LZ nanocomposite with SrHAp/GO/LZ coatings were increased by 67 % and 121 %, respectively. An initial 5 h burst of LZ release from the SrHAp/GO/LZ coating was followed by 14 h of gradual release, owing to LZ's physical and chemical adsorption. The SrHAp/GO/LZ coating effectively inhibited both S. epidermidis and S. aureus, and the inhibition lasted for three days, as demonstrated by the inhibition zone and colony count assays. When MG-63 cells are coated with SrHAp/GO/LZ composite coating, their adhesion, proliferation, and differentiation greatly improve when coated with pure titanium. A novel surface engineering nanomaterial for treating and preventing osteoporotic bone defects, SrHAp/GO/LZ, was shown to have high mechanical characteristics, superior antibacterial abilities, and osteoinductivity.

A rapid prototyped atmospheric non-thermal plasma-activated aerosol device and anti-bacterial characterisation.

Non-plasma technologies are being extensively investigated for their potential to mitigate microbial growth through the production of various reactive species. Predominantly, studies utilise atmospheric non-thermal plasma to produce plasma-activated liquids. The advancement of plasma-liquid applications has led to the investigation of plasma-activated aerosols (PAAs). This study aimed to produce a rapid-prototyped plasma-activated aerosol setup and perform chemical and anti-bacterial characterisation on the resultant activated aerosols. The setup was produced using stereolithography 3D printing, and air was used as the carrier gas. The novel design of the device allowed for the direct production of PAAs without the prior generation of plasma-activated water and subsequent aerosolisation. The generated PAAs were assessed for nitrite, hydrogen peroxide and ozone content using colourimetric assays. Anti-bacterial efficacy was tested against three human pathogenic strains: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica. It was observed that nitrite and ozone contact concentration increased with exposure time, yet no hydrogen peroxide was detected. The generated PAAs showed significant zones of no growth for all bacterial strains. These devices, therefore, show potential to be used as anti-bacterial disinfection technologies.

Biosynthesis of zinc oxide nanoparticles via neem extract and their anticancer and antibacterial activities.

In the present study, zinc oxide nanoparticles (ZnO-NPs) were synthesized using neem leaf aqueous extracts and characterized using transmission electron microscopy (TEM), ultraviolet visible spectroscopy (UV-Vis), and dynamic light scattering (DLS). Then compare its efficacy as anticancer and antibacterial agents with chemically synthesized ZnO-NPs and the neem leaf extract used for the green synthesis of ZnO-NPs. The TEM, UV-vis, and particle size confirmed that the developed ZnO-NPs are nanoscale. The chemically and greenly synthesized ZnO-NPs showed their optical absorbance at 328 nm and 380 nm, respectively, and were observed as spherical particles with a size of about 85 nm and 62.5 nm, respectively. HPLC and GC-MS were utilized to identify the bioactive components in the neem leaf aqueous extract employed for the eco-friendly production of ZnO-NPs. The HPLC analysis revealed that the aqueous extract of neem leaf contains 19 phenolic component fractions. The GC-MS analysis revealed the existence of 21 bioactive compounds. The antiproliferative effect of green ZnO-NPs was observed at different concentrations (31.25 µg/mL-1000 µg/mL) on Hct 116 and A 549 cancer cells, with an IC50 value of 111 µg/mL for A 549 and 118 µg/mL for Hct 116. On the other hand, the antibacterial activity against gram-positive and gram-negative bacteria was estimated. The antibacterial result showed that the MIC of green synthesized ZnO-NPs against gram-positive and gram-negative bacteria were 5, and 1 µg/mL. Hence, they could be utilized as effective antibacterial and antiproliferative agents.

Antibacterial activity and mechanism of chelerythrine against Streptococcus agalactiae.

Streptococcus agalactiae (S.agalactiae), also known as group B Streptococcus (GBS), is a highly infectious pathogen. Prolonged antibiotic usage leads to significant issues of antibiotic residue and resistance. Chelerythrine (CHE) is a naturally occurring benzophenidine alkaloid and chelerythrine chloride (CHEC) is its hydrochloride form with diverse biological and pharmacological activities. However, the antibacterial mechanism of CHEC against GBS remains unclear. Thus, this study aims to investigate the in vitro antibacterial activity of CHEC on GBS and elucidate its underlying mechanism. The antibacterial effect of CHEC on GBS was assessed using inhibitory zone, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays, as well as by constructing a time-kill curve. The antibacterial mechanism of CHEC was investigated through techniques such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM), measurement of alkaline phosphatase (AKP) activity, determination of Na+ K+, Ca2+ Mg2+-adenosine triphosphate (ATP) activity, observation of membrane permeability, and analysis of intracellular reactive oxygen species (ROS) and mRNA expression levels of key virulence genes. The results demonstrated that the inhibition zone diameters of CHEC against GBS were 14.32 mm, 12.67 mm, and 10.76 mm at concentrations of 2 mg/mL, 1 mg/mL, and 0.5 mg/mL, respectively. The MIC and MBC values were determined as 256 µg/mL and 512 µg/mL correspondingly. In the time-kill curve, 8 × MIC, 4 × MIC and 2 × MIC CHEC could completely kill GBS within 24 h. SEM and TEM analyses revealed significant morphological alterations in GBS cells treated with CHEC including shrinkage, collapse, and leakage of cellular fluids. Furthermore, the antibacterial mechanism underlying CHEC's efficacy against GBS was attributed to its disruption of cell wall integrity as well as membrane permeability resulting in extracellular release of intracellular ATP, AKP, Na+ K+, Ca2+ Mg2+. Additionally CHEC could increase the ROS production leading to oxidative damage and downregulating mRNA expression levels of key virulence genes in GBS cells. In conclusion, CHEC holds potential as an antimicrobial agent against GBS and further investigations are necessary to elucidate additional molecular mechanisms.

Antibacterial and preventive effects of newly developed modified nano-chitosan/glass-ionomer restoration on simulated initial enamel caries lesions: An in vitro study.

BACKGROUND: Despite the superiority of glass-ionomer cements (GICs) over composites in treating white spot lesions (WSLs), there is still a concern about their preventive and antibacterial properties. Efforts have been made to improve the strength of their bond to demineralized enamel, fluoride release and antibacterial properties by adding nanoparticles of chitosan, which seems to be a promising method. OBJECTIVES: The aim of the present study was to assess the antibacterial effect, the microshear bond strength (µSBS) to enamel at the WSL area, and the fluoride and nano-chitosan release after modifying the polyacrylic acid liquid phase of a traditional GIC with different nano-chitosan volumes. MATERIAL AND METHODS: A total of 120 samples were prepared, and then divided into 4 groups (n = 30): G1 - non-modified GIC, which served as a control group, while G2, G3 and G4 were modified with different nano-chitosan volumes (50%, 100% and 150%, respectively). Microshear bond strength was assessed using a universal testing machine (UTM) after storage in distilled water for 24 h. Fluoride and nanochitosan release was measured with the use of spectrophotometers at different time points (initially, and at 1 h, 24 h, 48 h, 72 h, 1 week, 2 weeks, 3 weeks, and 6 weeks) after storage in distilled water. The antibacterial effect against the Streptococcus aureus strain was assessed with the agar diffusion test. The data was statistically analyzed. RESULTS: After 24-hour storage, G2 recorded a slight, yet non-significant, increase in the µSBS values (4.1 ±0.94 MPa) as compared to G1 (3.9 ±1.30 MPa). With regard to fluoride release, the amount recorded for G1 was significantly greater at the end of the 24-hour storage period (0.70 ±0.30 µmf/cm2) than modified nano-chitosan GIC groups; G1 was followed by G4 (0.54 ±0.34 µmf/cm2). The highest amount of nano-chitosan release after 24-hour storage was noted for G3 (0.85 ±0.00 µmf/cm2). The highest inhibition zone value was recorded for G2. CONCLUSIONS: Glass-ionomer cement modified with 50% nano-chitosan was shown to positively affect µSBS and the antibacterial effect, while modification with 150% nano-chitosan significantly increased fluoride release.

Antibacterial activity and mechanism of luteolin isolated from Lophatherum gracile Brongn. against multidrug-resistant Escherichia coli.

Infections caused by multidrug-resistant (MDR) bacteria have become a major challenge for global healthcare systems. The search for antibacterial compounds from plants has received increasing attention in the fight against MDR bacteria. As a medicinal and edible plant, Lophatherum gracile Brongn. (L. gracile) has favorable antibacterial effect. However, the main antibacterial active compound and its antimicrobial mechanism are not clear. Here, our study first identified the key active compound from L. gracile as luteolin. Meanwhile, the antibacterial effect of luteolin was detected by using the broth microdilution method and time-kill curve analysis. Luteolin can also cause morphological structure degeneration and content leakage, cell wall/membrane damage, ATP synthesis reduction, and downregulation of mRNA expression levels of sulfonamide and quinolones resistance genes in multidrug-resistant Escherichia coli (MDR E. coli). Furthermore, untargeted UPLC/Q-TOF-MS-based metabolomics analysis of the bacterial metabolites revealed that luteolin significantly changed riboflavin energy metabolism, bacterial chemotaxis cell process and glycerophospholipid metabolism of MDR E. coli. This study suggests that luteolin could be a potential new food additive or preservative for controlling MDR E. coli infection and spread.