Pneumococcal Surface Protein A-Hybrid Nanoparticles Protect Mice from Lethal Challenge after Mucosal Immunization Targeting the Lungs.

Pneumococcal disease remains a global burden, with current conjugated vaccines offering protection against the common serotype strains. However, there are over 100 serotype strains, and serotype replacement is now being observed, which reduces the effectiveness of the current vaccines. Pneumococcal surface protein A (PspA) has been investigated as a candidate for new serotype-independent pneumococcal vaccines, but requires adjuvants and/or delivery systems to improve protection. Polymeric nanoparticles (NPs) are biocompatible and, besides the antigen, can incorporate mucoadhesive and adjuvant substances such as chitosans, which improve antigen presentation at mucosal surfaces. This work aimed to define the optimal NP formulation to deliver PspA into the lungs and protect mice against lethal challenge. We prepared poly(glycerol-adipate-co-ω-pentadecalactone) (PGA-co-PDL) and poly(lactic-co-glycolic acid) (PLGA) NPs using an emulsion/solvent evaporation method, incorporating chitosan hydrochloride (HCl-CS) or carboxymethyl chitosan (CM-CS) as hybrid NPs with encapsulated or adsorbed PspA. We investigated the physicochemical properties of NPs, together with the PspA integrity and biological activity. Furthermore, their ability to activate dendritic cells in vitro was evaluated, followed by mucosal immunization targeting mouse lungs. PGA-co-PDL/HCl-CS (291 nm) or CM-CS (281 nm) NPs produced smaller sizes compared to PLGA/HCl-CS (310 nm) or CM-CS (299 nm) NPs. Moreover, NPs formulated with HCl-CS possessed a positive charge (PGA-co-PDL +17 mV, PLGA + 13 mV) compared to those formulated with CM-CS (PGA-co-PDL -20 mV, PLGA -40 mV). PspA released from NPs formulated with HCl-CS preserved the integrity and biological activity, but CM-CS affected PspA binding to lactoferrin and antibody recognition. PspA adsorbed in PGA-co-PDL/HCl-CS NPs stimulated CD80+ and CD86+ cells, but this was lower compared to when PspA was encapsulated in PLGA/HCl-CS NPs, which also stimulated CD40+ and MHC II (I-A/I-E)+ cells. Despite no differences in IgG being observed between immunized animals, PGA-co-PDL/HCl-CS/adsorbed-PspA protected 83% of mice after lethal pneumococcal challenge, while 100% of mice immunized with PLGA/HCl-CS/encapsulated-PspA were protected. Therefore, this formulation is a promising vaccine strategy, which has beneficial properties for mucosal immunization and could potentially provide serotype-independent protection.

Pneumococcal surface protein a-hybrid nanoparticles protect mice from lethal challenge after mucosal immunization targeting the lungs

Pneumococcal disease remains a global burden, with current conjugated vaccines offering protection against the common serotype strains. However, there are over 100 serotype strains, and serotype replacement is now being observed, which reduces the effectiveness of the current vaccines. Pneumococcal surface protein A (PspA) has been investigated as a candidate for new serotype-independent pneumococcal vaccines, but requires adjuvants and/or delivery systems to improve protection. Polymeric nanoparticles (NPs) are biocompatible and, besides the antigen, can incorporate mucoadhesive and adjuvant substances such as chitosans, which improve antigen presentation at mucosal surfaces. This work aimed to define the optimal NP formulation to deliver PspA into the lungs and protect mice against lethal challenge. We prepared poly(glycerol-adipate-co-ω-pentadecalactone) (PGA-co-PDL) and poly(lactic-co-glycolic acid) (PLGA) NPs using an emulsion/solvent evaporation method, incorporating chitosan hydrochloride (HCl-CS) or carboxymethyl chitosan (CM-CS) as hybrid NPs with encapsulated or adsorbed PspA. We investigated the physicochemical properties of NPs, together with the PspA integrity and biological activity. Furthermore, their ability to activate dendritic cells in vitro was evaluated, followed by mucosal immunization targeting mouse lungs. PGA-co-PDL/HCl-CS (291 nm) or CM-CS (281 nm) NPs produced smaller sizes compared to PLGA/HCl-CS (310 nm) or CM-CS (299 nm) NPs. Moreover, NPs formulated with HCl-CS possessed a positive charge (PGA-co-PDL +17 mV, PLGA + 13 mV) compared to those formulated with CM-CS (PGA-co-PDL −20 mV, PLGA −40 mV). PspA released from NPs formulated with HCl-CS preserved the integrity and biological activity, but CM-CS affected PspA binding to lactoferrin and antibody recognition. PspA adsorbed in PGA-co-PDL/HCl-CS NPs stimulated CD80+ and CD86+ cells, but this was lower compared to when PspA was encapsulated in PLGA/HCl-CS NPs, which also stimulated CD40+ and MHC II (I-A/I-E)+ cells. Despite no differences in IgG being observed between immunized animals, PGA-co-PDL/HCl-CS/adsorbed-PspA protected 83% of mice after lethal pneumococcal challenge, while 100% of mice immunized with PLGA/HCl-CS/encapsulated-PspA were protected. Therefore, this formulation is a promising vaccine strategy, which has beneficial properties for mucosal immunization and could potentially provide serotype-independent protection.

Development of an Antigen Delivery Platform Using Lactobacillus acidophilus Decorated With Heterologous Proteins: A Sheep in Wolf's Clothing Story.

S-layers are bacterial structures present on the surface of several Gram-positive and Gram-negative bacteria that play a role in bacterial protection. In Lactobacillus acidophilus (L. acidophilus ATCC 4356), the S-layer is mainly composed of the protein SlpA. A tandem of two copies of the protein domain SLP-A (pfam: 03217) was identified at the C-terminal of SlpA, being this double SLP-A protein domain (in short dSLP-A) necessary and sufficient for the association of the protein to the L. acidophilus cell wall. A variety of proteins fused to the dSLP-A domain were able to spontaneously associate with high affinity to the cell wall of L. acidophilus and Bacillus subtilis var. natto, in a process that we termed decoration. Binding of dSLP-A-containing-proteins to L. acidophilus was stable at conditions that mimic the gastrointestinal transit in terms of pH, proteases, and bile salts. To evaluate if protein decoration of L. acidophilus can be adapted to generate an oral vaccine platform, a chimeric antigen derived from the bacterial pathogen Shiga-toxin-producing Escherichia coli (STEC) was constructed by fusing the sequences encoding the polypeptides EspA36-192, Intimin653-953, Tir240-378, and H7 flagellin352-374 (EITH7) to the dSLP-A domain (EITH7-dSLP-A). Recombinantly expressed EITH7-dSLP-A protein was affinity purified and combined with L. acidophilus cultures to allow the association of the chimeric antigen to the bacterial surface. EITH7-decorated L. acidophilus was orally administered to BALB/c mice and the induction of anti-EITH7 specific antibodies in sera and feces determined by ELISA. Mice presenting significantly higher anti-EITH7 antibodies titers were able to control more efficiently an experimental STEC infection than mice that received the non-decorated L. acidophilus carrier, indicating that antigen-decorated L. acidophilus can be adapted as a mucosal immunization delivery platform to elicit a protective immune response for vaccine purposes.

Induction of adaptive immune response by self-aggregating peptides.

INTRODUCTION: Recently, subunit vaccines are replacing some of the traditional vaccines because they offer a higher margin of safety. However, generally subunit vaccines have low antigenicity. Adjuvants are used in vaccine formulations to increase their immunogenicity, but current research suggests that adjuvants could induce serious side effects in susceptible individuals; therefore, the improvement of antigens and adjuvants is important. AREAS COVERED: Here we reviewed some self-aggregating peptides (SAPs) used as antigen delivery systems. SAPs are based on a short sequence of amino acids, which have self-aggregating properties, inducing self-interaction among peptide molecules by means of non-covalent interactions to generate nanoparticles (NPs). EXPERT COMMENTARY: SAPs increase the immunogenicity of fused/conjugated antigens because they can interact with antigen-presenting cells and induce adaptive immunity based on both humoral and cellular responses. As an example, we report an antigen delivery system based on SAPs forming NPs. These NPs are synthesized using a recombinant baculovirus. We fused the green fluorescent protein to the first 110 amino acids of polyhedrin protein from Autographa californica nucleopolyhedrovirus, which has self-aggregating properties. We showed that these NPs prompt high antibody levels without inducing inflammation, similarly to some SAPs reported here.

Expression of the VP40 antigen from the Zaire ebolavirus in tobacco plants.

MAIN CONCLUSION: The plant cell is able to produce the VP40 antigen from the Zaire ebolavirus , retaining the antigenicity and the ability to induce immune responses in BALB/c mice. The recent Ebola outbreak evidenced the need for having vaccines approved for human use. Herein we report the expression of the VP40 antigen from the Ebola virus as an initial effort in the development of a plant-made vaccine that could offer the advantages of being cheap and scalable, which is proposed to overcome the rapid need for having vaccines to deal with future outbreaks. Tobacco plants were transformed by stable DNA integration into the nuclear genome using the CaMV35S promoter and a signal peptide to access the endoplasmic reticulum, reaching accumulation levels up to 2.6 µg g-1 FW leaf tissues. The antigenicity of the plant-made VP40 antigen was evidenced by Western blot and an initial immunogenicity assessment in test animals that revealed the induction of immune responses in BALB/c mice following three weekly oral or subcutaneous immunizations at very low doses (125 and 25 ng, respectively) without accessory adjuvants. Therefore, this plant-based vaccination prototype is proposed as an attractive platform for the production of vaccines in the fight against Ebola virus disease outbreaks.

Preparation and in vitro characterization of chitosan nanoparticles containing Mesobuthus eupeus scorpion venom as an antigen delivery system

Hydrophilic nanoparticles have been widely investigated in recent years as delivery systems for therapeutic macromolecules such as antigens. In the present study Mesobuthus eupeus venom-loaded chitosan nanoparticles were prepared via ionic gelation of tripolyphosphate (TPP) and chitosan. The optimum encapsulation efficiency (91.1 percent) and loading capacity (76.3 percent) were obtained by a chitosan concentration of 2 mg/mL, chitosan-to-TPP mass ratio of 2 and M. eupeus venom concentration of 500 µg/mL. The average nanoparticle size at optimum conditions was determined by Zetasizer (Malvern Instruments, UK). The nanoparticle size was about 370 nm (polydispersity index: 0.429) while the zeta potential was positive. Transmission electron microscope (TEM) imaging showed a spherical, smooth and almost homogenous structure for nanoparticles. Fourier transform infrared (FTIR) spectroscopy confirmed tripolyphosphoric groups of TPP linked with ammonium groups of chitosan in the nanoparticles. The in vitro release of nanoparticles showed an initial burst release of approximately 60 percent in the first ten hours, followed by a slow and much reduced additional release for about 60 hours. It is suggested that the chitosan nanoparticles fabricated in our study may provide a suitable alternative to traditional adjuvant systems.(AU)

Preparation and in vitro characterization of chitosan nanoparticles containing Mesobuthus eupeus scorpion venom as an antigen delivery system

Hydrophilic nanoparticles have been widely investigated in recent years as delivery systems for therapeutic macromolecules such as antigens. In the present study Mesobuthus eupeus venom-loaded chitosan nanoparticles were prepared via ionic gelation of tripolyphosphate (TPP) and chitosan. The optimum encapsulation efficiency (91.1 percent) and loading capacity (76.3 percent) were obtained by a chitosan concentration of 2 mg/mL, chitosan-to-TPP mass ratio of 2 and M. eupeus venom concentration of 500 µg/mL. The average nanoparticle size at optimum conditions was determined by Zetasizer (Malvern Instruments, UK). The nanoparticle size was about 370 nm (polydispersity index: 0.429) while the zeta potential was positive. Transmission electron microscope (TEM) imaging showed a spherical, smooth and almost homogenous structure for nanoparticles. Fourier transform infrared (FTIR) spectroscopy confirmed tripolyphosphoric groups of TPP linked with ammonium groups of chitosan in the nanoparticles. The in vitro release of nanoparticles showed an initial burst release of approximately 60 percent in the first ten hours, followed by a slow and much reduced additional release for about 60 hours. It is suggested that the chitosan nanoparticles fabricated in our study may provide a suitable alternative to traditional adjuvant systems.(AU)