Improved recycling of a gasification fly ash: An integrated waste management approach within the framework of a Circular Economy.

A Circular Waste Management alternative is considered in this paper in which a complete ash valorization process is proposed for an Integrated Gasification with Combined Cycle fly ash, trying to extract maximum value from this waste before it is discarded. In the paper, germanium, a scarce resource vital in our modern society, is first extracted from fly ash using water, with an extraction yield of 85%, and subsequently, the leached fly ash is used in the manufacture of fire-resistant boards containing 60% ash, thereby avoiding its disposal in a landfill. The potential environmental impact caused by the two stages of the process was analyzed, and the final effluent was considered to achieve a zero-discharge objective. This paper contributes to the development of a more sustainable management alternative for an industrial waste produced in increased amounts and provides the basis for a symbiotic coupling relationship among various industrial sectors.

Enhancing agricultural output: Investigating the impact of advanced organic formulations on crop productivity, nutrient use efficiency, and profitability in a multi-crop system.

The significance of integrating agricultural by-products such as paddy husk ash (PHA) and potato peels with organic fertilizers lies in enhancing soil fertility, increasing crop yields, and reducing reliance on traditional organic fertilizers like farmyard manure (FYM) or compost alone. Grounded in sustainable agriculture and nutrient management frameworks, this study examines the impact of diverse formulations derived from agricultural waste on productivity, nutrient efficiency, and profitability in a pigeon pea-vegetable mustard-okra cropping system. A two-year field experiment (2020-2022) at ICAR-IARI, New Delhi tested seven nutrient sources viz., (T1) control, (T2) 100% RDN through FYM, (T3) 100% RDN through improved RRC, (T4) 100% RDN through PHA based formulation, (T5) 75% RDN through PHA based formulation, (T6) 100% RDN through PPC based formulation and (T7) 75% RDN through PPC based formulation that were tested in RBD and replicated thrice. Treatment T4 had significant effect on seed yield of pigeon pea (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1), leaf yield of vegetable mustard (81.57 ± 4.59 and 82.97 ± 4.17 t ha-1), and fruit yield of okra (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) grown in rotation, followed by treatment T6 and T2 during both the years respectively over control. Enhanced system uptake of N, P and K along with system gross and net returns in T4, showed increases of 78.9%, 83.8%, 72.4%, 54.4% and 56.8% in the first year and 77.5%, 80.8%, 77.7%, 54.8% and 57.4% in the second year, respectively, over control. Treatment T4 significantly improved apparent recovery by 66.3% and 69.2% in pigeon pea, 64.7% and 47.9% in vegetable mustard, and 72.7% and 79.4% in okra over T3, averaged across two years. Based on the above findings, (T4) 100% RDN through PHA-based formulation, and (T6) 100% RDN through PPC-based formulation can be recommended for areas with a shortage of FYM but availability of rice husk ash/potato peels for sustainable agricultural wastes and improved sustainability.

Speciation distribution and leaching behavior of heavy metals in coal gasification fine ash: Influence of particle size, carbon content and mineral composition.

In this study, the occurrence and distribution of heavy metals in coal gasification fine ash (CGFA) with different particle sizes were investigated to ensure safer disposal and utilization strategies for CGFA. These measures are critical to sustainable industrial practices. This study investigates the distribution and leachability of heavy metals in CGFA, analyzing how these factors vary with particle size, carbon content, and mineral composition. The results demonstrated that larger CGFA particles (>1 mm) encapsulated up to 70 % more heavy metals than smaller particles (<0.1 mm). Cr and Zn were present in higher concentrations in larger CGFA particles, whereas volatile elements such as Zn, Hg, Se, and Pb were found in relatively higher contents in finer CGFA particles. At least 70 % of Hg in CGFA was present in an acid-soluble form of speciation, whereas Cd, Zn, and Pb were mostly present in a reducible form of speciation, which could be attributed to the presence of franklinite. More than 40 % of Cd and Zn in fine CGFA particles exist in an acid-soluble form. With the exception of CGFA_1.18, Se in CGFA mainly existed in an oxidizable form at a ratio of 60 %-80 %. This could be attributed to the presence of bassanite particles as well as the higher affinity of Se for S. In contrast, Cr, Cu, and As were mostly present in residual speciation forms owing to their parasitism in quartz, sillimanite, and amorphous Fe solid solution in CGFA. Additionally, the study revealed that there was no significant relationship between heavy metal content, leaching behavior, and carbon content in CGFA. Based on combined analyses using toxicity characteristic leaching procedure (TCLP) leaching concentrations and risk assessment code (RAC) results, it is recommended to focus on the environmental risks posed by Cd, Cr, Pb, Zn, and Hg in CGFA during their modification and utilization processes.

The possible application of fly ash (FA) to ameliorate acid mine water (AMD) for irrigation of potato (Solanum tuberosum L.).

Some areas in Johannesburg abounds with mine wastes namely, acid mine drainage (AMD) as well as fly ash (FA), which are by-products of gold mining and coal burning, respectively. Studies show that a solution formed through mixing these wastes neutralises the acidity of AMD and is an alternative source of irrigation. While studies show improved growth and yield of plants irrigated with fly ash-amended AMD, there are rarely sufficient studies conducted in South Africa showing evidence of altered pH of AMD and that food crops irrigated with fly ash-amended AMD exhibit improved concentration of essential nutrient elements. In this study, AMD was sourced from a gold mine in Johannesburg and fly ash collected from a coal-burning power station in the Mpumalanga Province, mixed at 1:0, 1:1, and 3:1 (w/v) of fly ash to AMD and used to irrigate potatoes. The objective was to assess whether the solutions of FA-amended AMD alter the pH of the AMD and to evaluate if irrigating potatoes with the aforementioned improve the concentration of essential nutrient elements and heavy metals in the tubers. Results show that the pH of AMD was increased in the 1:0 and 1:1 solutions but decreased in the 3:1 solution. The concentrations of Pb and Co were decreased in tubers irrigated with the 50 % AMD and 75 % AMD while that of Ni and Cd were markedly increased in tubers irrigated with solutions of fly ash-amended AMD. In the main, the potato tubers exhibited significantly higher concentrations of Al, Mo, Cu, Ca, Mg, and Zn when irrigated with fly-ash-amended AMD. The pH range levels from FA-AMD treated samples were within the acceptable pH range (5.5-6.5) which is acceptable for water that could be used for irrigation of crops. Also, the decreased Co and Pb and improved concentration of essential nutrient elements indicate that the constituents absorbed large quantities of the heavy metals while releasing the nutrients. In conclusion, the selected fly ash has proven as an alternative low-cost readily-available, affordable, and accessible adsorbent that neutralize the acidity of AMD, decrease the concentration of heavy metals, and increase the concentration of essential nutrient elements. Importantly, the liming potential among other traits of the fly ash improved the quality of the AMD such that the wastes were proven in this study suitable to irrigate potatoes.

Fruit and vegetable waste used as bacterial growth media for the biocementation of two geomaterials.

This paper investigates the feasibility of using randomly collected fruit and vegetable (FV) waste as a cheap growing medium of bacteria for biocementation applications. Biocementation has been proposed in the literature as an environmentally-friendly ground improvement method to increase the stability of geomaterials, prevent erosion and encapsulate waste, but currently suffers from the high costs involved, such as bacteria cultivation costs. After analysis of FV waste of varied composition in terms of sugar and protein content, diluted FV waste was used to grow ureolytic (S. pasteurii, and B.licheniformis) and also an autochthonous heterotrophic carbonic anhydase (CA)-producing B.licheniformis strain, whose growth in FV media had not been attempted before. Bacterial growth and enzymatic activity in FV were of appropriate levels, although reduced compared to commercial media. Namely, the CA-producing B.licheniformis had a maximum OD600 of 1.799 and a CA activity of 0.817 U/mL in FV media. For the ureolytic pathway, B. licheniformis reached a maximum OD600 of 0.986 and a maximum urease activity of 0.675 mM urea/min, and S. pasteurii a maximum OD600 = 0.999 and a maximum urease activity of 0.756 mM urea/min. Biocementation of a clay and locomotive ash, a geomaterial specific to UK railway embankments, using precultured bacteria in FV was then proven, based on recorded unconfined compressive strengths of 1-3 MPa and calcite content increases of up to 4.02 and 8.62 % for the clay and ash respectively. Scanning Electron Microscope (SEM) and energy dispersive X-ray spectroscopy (EDS), attested the formation of bioprecipitates with characteristic morphologies and elementary composition of calcite crystals. These findings suggest the potential of employing FV to biocement these problematic geomaterials and are of wider relevance for environmental and geoenvironmental applications involving bioaugmentation. Such applications that require substrates in very large quantities can help tackle the management of the very voluminous fruit and vegetable waste produced worldwide.

Physical properties of experimental light-curing pattern resins based on poly (n-butyl methacrylate) or poly(iso-butyl methacrylate).

Experimental light-curing pattern resins were fabricated to produce pattern resin materials with adequate dimensional stability. The light-curing pattern resins consisted of poly(n-butyl methacrylate) or poly(iso-butyl methacrylate) (PiBMA) polymers and methacrylate monomers. The physical properties, amount of residual ash after burning, Vickers hardness, flexural strength, and volumetric polymerization shrinkage of each material were determined. The data obtained for the prepared resins were compared with those of a commercially available pattern resin, Palavit G (PG). A lower amount of residual ash was observed for some of the prepared resins than for PG. The Vickers hardness and flexural strength values of all experimental resins were lower than those of PG. The volumetric polymerization shrinkage of all the experimental resins based on PiBMA was lower than that of PG. These results suggest that acrylic light-curing resin materials based on PiBMA may be useful for patterning and indexing during soldering.

Mechanical Properties and Durability of Composite Cement Pastes Containing Phase-Change Materials and Nanosilica.

Escalating global surface temperatures are highlighting the urgent need for energy-saving solutions. Phase-change materials (PCMs) have emerged as a promising avenue for enhancing thermal comfort in the construction sector. This study assessed the impact of incorporating PCMs ranging from 1% to 10% by mass into composite Portland cement partially replaced by fly ash (FA) and nanosilica particles (NS). Mechanical and electrochemical techniques were utilized to evaluate composite cements. The results indicate that the presence of PCMs delayed cement hydration, acting as a filler without chemically interacting within the composite. The combination of FA and PCMs reduced compressive strength at early ages, while thermal conductivity decreased after 90 days due to the melting point and the latent heat of PCMs. Samples with FA and NS showed a significant reduction in the CO2 penetration, attributed to their pozzolanic and microfiller effects, as well as reduced water absorption due to the non-absorptive nature of PCMs. Nitrogen physisorption confirmed structural changes in the cement matrix. Additionally, electrical resistivity and thermal behavior assessments revealed that PCM-containing samples could reduce temperatures by an average of 4 °C. This suggested that PCMs could be a viable alternative for materials with thermal insulation capacity, thereby contributing to energy efficiency in the construction sector.

Morphological and biochemical responses of Vicia faba (faba beans) grown on fly ash amended soil in the presence of Rhizobium leguminosarum and arbuscular mycorrhizal fungus.

An experiment was conducted in the greenhouse to investigate the feasibility of Vicia faba grown on different fly ash concentrations (0-30%) and dual inoculation with Rhizobium and arbuscular mycorrhizal fungi (AMF). Sampling was done 45 days after sowing to analyse the plant growth parameters, photosynthetic attributes (total chlorophyll and carotenoids content), protein content, nitrogen (N) and phosphorus (P) content, defensive factors (antioxidant activity and proline content) and damage markers (lipid peroxidation, reactive oxygen species and cell viability). The results revealed that the application of fly ash (FA) alone did not result in any significant improvement in growth, biochemical and physiological parameters. However, dual inoculation showed a synergistic impact on legume growth, photosynthetic pigments, protein, proline, and cell viability. Rhizobium, AMF and 10% FA showed maximum enhancement in all attributes mentioned. 20% and 30% fly doses showed a reduction in growth, photosynthesis and antioxidants and caused oxidative stress via lipid peroxidation. The results showed that the synergistic or combined interactions between all three variables of the symbiotic relationship (Rhizobium-legume-AMF) boosted plant productivity.

The formation of gold in woody biomass combustion ashes.

This paper investigates the enrichment of gold through combustion and ash-leaching techniques utilizing woody biomass as a fuel source. It delves into the formation of gold in ashes derived from the fixed grate combustion of pelletized woody biomass containing noble metals, conducted at a pilot-scale boiler. The biomass sample was gathered from a brownfield land at an abandoned mining area, avoiding induced phytoextraction. The fuel contained <0.05 mg/kg gold, while the bottom ash, after heat exchanger ash, deposited ash, and fly ash contained 1.52 mg/kg, 1.99 mg/kg, 2.64 mg/kg, and 3.52 mg/kg of gold, respectively. Although the amount of fly ash is lower compared to bottom ash, the concentration of gold is the highest in fly ash, which follows the after heat exchanger ash and bottom ash. The concentration of gold was enriched by a three-stage procedure of water leaching, acid leaching (10 % HCl), and alkaline leaching (5 % NaOH), after which 12.1 mg/kg and 12.6 mg/kg gold was found in the residues obtained from leached bottom ash and deposited ash, respectively. SEM was utilized to depict the morphology of gold, which appears in bottom ash as individual neat particles with a purity higher than 98 %. Pure gold particles in the size of 1-2 µm are presented in the after heat exchanger ash; meanwhile, gold in fly ash is primarily associated with potassium, sodium, sulfur, and oxygen. The findings in this study pave the way for reclaiming gold from bio-ores as well as assist in better understanding the formation of this precious metal in these secondary resources.

Optimizing agricultural sustainability: enriched organic formulations for growth, yield, and soil quality in a multi-crop system.

Utilizing agricultural and industrial wastes, potent reservoirs of nutrients, for nourishing the soil and crops through composting embodies a sustainable approach to waste management and organic agriculture. To investigate this, a 2-year field experiment was conducted at ICAR-IARI, New Delhi, focusing on a pigeon pea-vegetable mustard-okra cropping system. Seven nutrient sources were tested, including a control (T1), 100% recommended dose of nitrogen (RDN) through farmyard manure (T2), 100% RDN through improved rice residue compost (T3), 100% RDN through a paddy husk ash (PHA)-based formulation (T4), 75% RDN through PHA-based formulation (T5), 100% RDN through a potato peel compost (PPC)-based formulation (T6), and 75% RDN through PPC-based formulation (T7). Employing a randomized block design with three replications, the results revealed that treatment T4 exhibited the significantly highest seed (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1) and stover (7.83 ± 0.41 and 8.03 ± 0.58 t ha-1) yield of pigeon pea, leaf yield (81.57 ± 4.69 and 82.97 ± 4.17 t ha-1) of vegetable mustard, and fruit (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) and stover (21.64 ± 1.31 and 22.03 ± 1.30 t ha-1) yield of okra during both study years compared to the control (T1). Treatment T4 was on par with T2 and T6 for seed and stover yield in pigeon pea, as well as okra, and leaf yield in vegetable mustard over both years. Moreover, T4 demonstrated notable increase of 124.1% and 158.2% in NH4-N and NO3-N levels in the soil, respectively, over the control. The enhanced status of available nitrogen (N) and phosphorus (P) in the soil, coupled with increased soil organic carbon (0.41%), total bacteria population (21.1%), fungi (37.2%), actinomycetes (44.6%), and microbial biomass carbon (28.5%), further emphasized the positive impact of T4 compared to the control. Treatments T2 and T6 exhibited comparable outcomes to T4 concerning changes in available N, P, soil organic carbon, total bacteria population, fungi, actinomycetes, and microbial biomass carbon. In conclusion, treatments T4 and T6 emerge as viable sources of organic fertilizer, particularly in regions confronting farmyard manure shortages. These formulations offer substantial advantages, including enhanced yield, soil quality improvement, and efficient fertilizer utilization, thus contributing significantly to sustainable agricultural practices.

A new strategy for utilization of gasification ash: Manganese oxides-modified activated carbon for efficient copper citrate removal.

To address the challenges posed by solid waste generated from coal gasification ash, a pyrolysis self-activation method was employed to prepare activated carbon by gasification ash, followed by the modification with manganese oxide to enhance its adsorption performance. Subsequently, the removal efficiency and mechanism for copper citrate were investigated. The results demonstrated the successful preparation of manganese oxides modified gasification ash-derived activated carbon (GAC-MnOx), exhibiting a specific surface area of 158.3 m2/g and a pore volume of 0.1948 cm³/g. The kinetic process could be described by the pseudo-second-order kinetic model (R2 = 0.958). High removal efficiency and low concentration of dissolved Mn were observed within the pH range of 3-10, where the adsorption capacity of GAC-MnOx for copper citrate exhibited an inverse relationship with pH. Notably, the fitting results of the Langmuir model demonstrated that the maximum adsorption capacity of GAC-MnOx for copper citrate is determined to be 7.196 mg/g at pH 3. The adsorption capacity of GAC-MnOx was found to be significantly reduced to 0.26 mg/g as the pH decreased below 2, potentially attributed to the dissolution of Mn. The findings of the Dual-Mode model demonstrated that the copper citrate removal mechanism by GAC-MnOx involved both surface adsorption and precipitation processes as follows: the porous structure of activated carbon enables physical adsorption of copper citrate, the MnOx or oxygen-containing functional groups establish chemical bonds with copper citrate and subsequently precipitate onto the surface of the adsorbent. The physical adsorption remains predominant in the removal of copper citrate, despite a gradual decrease in its proportion with increasing pH and equilibrium concentrations. Moreover, the X-ray photoelectron spectroscopy results indicated that copper citrate might be oxidized by MnOx to release copper ions and be retained on the surface of the adsorbent, meaning the adsorption efficiency of Cu(II)-Cit by GAC was enhanced through MnOx oxidation. This study could provide a new strategy for the high-value resource utilization of gasification ash.

Selection of an alternate cementitious mortar using ceramic tile dust waste: a hybrid MCDM approach.

Selection of a suitable alternative material from a pool of alternatives with many conflicting criteria becomes a Multi-Criteria Decision Making (MCDM) problem. In the present study, ternary blended mortars were prepared using ceramic tile dust waste (CTD), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as binder components. Crusher dust (CD) was used as a fine aggregate component. Binder to aggregate ratios of 1:3 and 1:1 were prepared considering suitable flow. A total of 16 mortar mixes were cast. These mortars were tested for various conflicting criteria compressive strength, flexural strength, porosity, water absorption, bulk density, thermal conductivity, specific heat, thermal diffusivity, and thermal effusivity whose weightages obtained were 29.09%, 20.08%, 12.77%, 10.60%, 8.74%, 6.74%, 5.54%, 4.47%, and 1.97%, respectively, as per AHP analysis. Later, considering these different criteria and alternate mortars, it was observed that a 1:1 mortar with 20% CTD, 30% FA, and 50% GGBFS (RC20F30G50) is found to be the suitable mortar with the highest relative closeness coefficient of 0.861 and the highest net outranking flow of 0.316 with respect to MCDM techniques: technique for order of preference by similarity to ideal solution (TOPSIS) and preference ranking organization method for enrichment of evaluations (PROMETHEE-II), respectively. The ranking of the mortar in both methods complies with the relative weightages of the criteria and the performance of the mortars with respect to the above criteria.

Effect of fly ash and curing temperature on the properties of magnesium phosphate repair mortar.

This article is aimed at discussing the combined effect of mineral admixture and servicing temperature, especially in cold environment, on the properties of magnesium phosphate repair mortar (MPM). The influence mechanism of fly ash content on the microstructure and performance of MPM were firstly investigated, and then the evolution rules in properties of fly ash modified MPM cured at - 20 °C, 0 °C, 20 °C and 40 °C were further revealed. The results show that the incorporation of fly ash has no significant effect on the setting time and fluidity of MPM. When MPM is modified with 10 wt% and 15 wt% fly ash, its mechanical properties, adhesive strength, water resistance, and volume stability are effectively improved. Fly ash reduces the crystallinity and continuity of struvite enriched in hardened MPM, and its particles are embedded among struvite and unreacted MgO. The compressive strength of MPM-10 cured for various ages increases with the elevating of curing temperature, while the flexural strength, interfacial bonding strength, strength retention and linear shrinkage exhibits the opposite laws. When cured at 0 °C and - 20 °C, MPM-10 still has good early strength, water resistance and interfacial bonding properties, which indicates that MPM-10 provides with an ability of emergency repair of cracked components served in cold environments.

A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline.

Heavy metal ions and antibiotics were simultaneously detected in authentic water systems. This research, for the first time, employed synthesized sophorolipid-modified fly ash(SFA) to eliminate tetracycline(TC) and lead(Pb2+) from wastewater. Various characterization techniques, including SEM-EDS, FTIR, XPS, BET, and Zeta, were employed to investigate the properties of the SFA. The results showed that the sophorolipid modification significantly improved the fly ash's adsorption capacities for the target pollutants. The static adsorption experiments elucidated the adsorption behaviors of SFA towards TC and Pb2+ in single and binary systems, highlighting the effects of different Environmental factors on the adsorption behavior in both types of systems. In single systems, SFA exhibited a maximum adsorption capacity of 128.96 mg/g for Pb2+ and 55.57 mg/g for TC. The adsorption of Pb2+ and TC followed pseudo-second-order kinetics and Freundlich isotherm models. The adsorption reactions are endothermic and occur spontaneously. SFA demonstrates varying adsorption mechanisms for two different types of pollutants. In the case of Pb2+, the primary mechanisms include ion exchange, electrostatic interaction, cation-π interaction, and complexation, while TC primarily engages in hydrogen bonding, π-π interaction, and complexion. The interaction between Pb2+ and TC has been shown to improve adsorption efficiency at low concentrations. Additionally, adsorption-desorption experiments confirm the reliable cycling performance of modified fly ash, highlighting its potential as a cost-effective and efficient adsorbent for antibiotics and heavy metals.

Investigation and performance analysis of eco-friendly coco fiber concrete hybridized with CNT blend.

With the development of the technical trend, concrete using waste alternate material instead of sand material found economic potential for good structural behaviour. Besides, the susceptible crack, low strength-to-weight ratio, and low compressive strength are the reasons for shrinkage. Due to this reason, the investigation aims to limit the shrinkage under live load and increase the compression and flexural strength by the introduction of coconut waste chopped fiber (wCF), waste fly ash (wFA), and carbon nanotube powder (CNT) blended with conventional Portland paste. The developed concrete consists of 5 wt% wCF, 10 wt% wFA, and 0, 5, 10, and 15 wt% of CNT and is subjected to X-ray diffraction analysis, bulk density, compression and flexural strength, and water absorption studies. The X-ray diffraction pattern revealed the wCF, wFA, CNT, and matrix compositions. The concrete developed with 5 wt% wCF, 10 wt% wFA, and 15 wt% CNT cured within 28 days recorded maximum behaviour of compression strength (47 ± 1.8 MPa), flexural strength (4.9 ± 0.19 MPa), and water absorption of (2.8 ± 0.05 %).

Forecasting residual mechanical properties of hybrid fibre-reinforced self-compacting concrete (HFR-SCC) exposed to elevated temperatures.

The use of hybrid fibre-reinforced Self-compacting concrete (HFR-SCC) has escalated recently due to its significant advantages in contrast to normal concrete such as increased ductility, crack resistance, and eliminating the need for compaction etc. The process of determining residual strength properties of HFR-SCC after a fire event requires rigorous experimental work and extensive resources. Thus, this study presents a novel approach to develop equations for reliable prediction of compressive strength (cs) and flexural strength (fs) of HFR-SCC using gene expression programming (GEP) algorithm. The models were developed using data obtained from internationally published literature having eight inputs including water-cement ratio, temperature, fibre content etc. and two output parameters i.e., cs and fs. Also, different statistical error metrices like mean absolute error (MAE), coefficient of determination ( R 2 ) and objective function (OF) etc. were employed to assess the accuracy of developed equations. The error evaluation and external validation both approved the suitability of developed models to predict residual strengths. Also, sensitivity analysis was performed on the equations which revealed that temperature, water-cement ratio, and superplasticizer are some of the main contributors to predict residual compressive and flexural strength.

Enhancing the properties of swelling soils with lime, fly ash, and expanded polystyrene -A review.

This paper discusses efforts made by past researchers to steady the expansive (problematic) soils using mechanical and chemical techniques - specifically with EPS beads, lime and fly ash. Administering swelling of problematic soils is critical for civil engineers to prevent structural distress. This paper summarizes studies on reduction of swelling potential using EPS, lime and fly ash individually. Chemical stabilization with lime and fly ash are conventional methods for expansive soil stabilization, with known merits and demerits. This paper explores the suitability of different materials under various conditions and stabilization mechanisms, including cation exchange, flocculation, and pozzolanic reactions. The degree of stabilization is influenced by various factors such as the type and amount of additives, soil mineralogy, curing temperature, moisture content during molding, and the presence of nano-silica, organic matter, and sulfates. Additionally, expanded polystyrene (EPS) improves structural integrity by compressing when surrounded clay swells, reducing overall swelling. Thus, EPS addresses limitations of chemicals by mechanical means. Combining EPS, lime and fly ash creates a customized system promoting efficient, long-lasting, cost-effective and eco-friendly soil stabilization. Chemicals address EPS limitations like poor stabilization. This paper benefits civil engineers seeking to control expansive soil swelling and prevent structural distress. It indicates potential of an EPS-lime-fly ash system and concludes by identifying research gaps for further work on such combinatorial stabilizer systems.

Mineral transformation and solidification of heavy metals during co-melting of MSWI fly ash with coal fly ash.

Melting is an efficient method to turn municipal solid waste incineration (MSWI) fly ash (FA) into non-hazardous material. Coal fly ash (CFA) was selected as the silica-alumina source to carry out co-melting research with MSWI FA in this work. The effects of the temperature and the CFA content on mineral transformation and the migration characteristics of heavy metals were analyzed. The results showed that the mixtures of MSWI FA and CFA reacted at high temperatures to mainly generate Ca2Al2SiO7, Ca2SiO4, and CaAl2Si2O8 primarily and then melted and formed the amorphous-phase vitreous body when the CFA content was more than 40% and the temperature was higher than 1300 °C. During the melting process, Cd and Pb were almost volatilized, while Cr, Mn, and Ni were almost retained. Besides, the volatilization rates of Cu and Zn fluctuated with the temperature and the CFA content. Suitable treatment temperature and CFA content were conducive to the transformation of the heavy metals in the FA into stable forms, and the melting products were no longer hazardous wastes because the vitreous body could effectively encapsulate heavy metals. This study aims to help reuse the FA and CFA collaboratively and be more environmentally friendly.

Evolution of physicochemical and leaching characteristics of municipal solid waste incineration fly ash in China under ultra-low emission standard.

The physical and chemical characteristics of fly ash has changed significantly under ultra-low emission system and the current leaching system is no longer suitable for high alkalinity fly ash. This work investigated the pH values and evolution of physical and chemical characteristics of fly ash from 24 typical municipal solid waste incineration plants in China. The pH value of the leaching solution obtained by HJ/T 300-2007 presented two different acid and alkali characteristics, where high and low alkalinity fly ash accounted for 54.17% and 45.83%, respectively. The alkali content in fly ash increased significantly after ultra-low emission standard, increasing by 18.24% compared with before the implementation of GB 18485-2014. The leaching behavior of high alkalinity fly ash showed the illusion that they could enter the landfill only by the addition of a small amount of chelating agent or even without stabilization treatment, and its long-term landfill risk is significant. The phase change of high alkalinity fly ash and pH value change of the leaching solution after carbonation were the key factors for the leaching concentration change of heavy metals. Therefore, it is recommended to improve the existing leaching system or conduct accelerated carbonization experiments to scientifically evaluate the long-term leaching characteristics of high alkalinity fly ash, and to reduce the risk of heavy metal release from high alkalinity FA after entering the landfill site.

Extraction of phosphorus from sewage sludge ash by electrodialysis combined with wet-chemical extraction.

Phosphorus (P) recovery from sewage sludge ash (SSA) is considered to be an effective method for P recovery. In this work, P extraction and the removal of heavy metals were realized by electrodialysis. Low-cost, easily available, and environmentally friendly plant extracts were applied as suspension to reduce the inevitable secondary pollution. And the feasibility of using plant extracts was analysed by comparing with using deionized water (DI) and oxalic acid (OA) solution. When SSA was suspended in different solutions (DI, OA, and three plant extracts - Hovenia acerba (HA), Saponin (SA) and Portulaca oleracea (PO)), the effects of reaction time and plant extract concentration on P extraction and heavy metal separation of SSA under ED treatment were compared. After the process of electrodialysis, compared to other experimental groups, electrodialysis with plant extracts obtained more P released from SSA, but less P migrated to the anode chamber. However, when SSA was suspended in PO at a concentration of 80 g/L, the proportion of P transferred from SSA to the anode chamber can still reached 37.86%. In addition, the use of plant extracts as suspension had a positive effect on the removal of heavy metals, but its effect was lower than that of the oxalic acid-treated experimental group. The results indicated that the use of plant extracts for wet-chemical extraction combined with electrodialysis promoted the removal of heavy metals and the extraction of P from SSA, which is a feasible option.