Highly Efficient and Selective Hydrodeoxygenation of Guaiacol Using Ni-Supported Honeycomb-Structured Biochar and Phosphomolybdic Acid.

The sustainable development of energy has always been a concern. Upgrading biomass catalysis into hydrocarbon liquid fuels is one of the effective methods. In order to upgrade biomass derivative guaiacol by Hydrodeoxygenation (HDO) catalysis, this article report a three-dimensional honeycomb structure biochar loaded with Ni nanoparticles and phosphomolybdic acid demonstrating excellent catalytic performance in a short period of time. This is due to the porous structure of biochar, which allows Ni metal nanoparticles to be highly uniformly dispersed on the support, which enhances the catalytic hydrogenation of guaiacol in terms of both rate and efficiency. Furthermore, it was observed that the added phosphomolybdic acid dissolved within the temperature range of 78-90°C, functioning as a homogeneous catalyst in the process. This proves advantageous, as the phosphomolybdic acid becomes accessible at any location within the porous Ni/C catalyst. The detailed characterization data revealed that the carbon support prepared in this study has a high specific surface area of up to 1375.61 m2/g. Additionally, the phosphomolybdic acid exhibited rich acidity, with Brønsted and Lewis acid contents of 2.55 µmol/g and 21.45 µmol/g, respectively. Reaction data demonstrated that at 240°C for 180 minutes, 100% conversion and 97.9% cyclohexane selectivity were achieved.

Metal vacancy-enriched layered double hydroxide for biomass molecule electrooxidation coupled with hydrogen production.

The electrochemical oxidation of biomass molecules coupling with hydrogen production is a promising strategy to obtain both green energy and value-added chemicals; however, this strategy is limited by the competing oxygen evolution reactions and high energy consumption. Herein, we report a hierarchical CoNi layered double hydroxides (LDHs) electrocatalyst with abundant Ni vacancies for the efficient anodic oxidation of 5-hydroxymethylfurfural (HMF) and cathodic hydrogen evolution. The unique hierarchical nanosheet structure and Ni vacancies provide outstanding activity and selectivity toward several biomass molecules because of the finely regulated electronic structure and highly-exposed active sites. In particular, a high faradaic efficiency (FE) at a high current density (99% at 100 mA cm-2) is achieved for HMF oxidation, and a two-electrode electrolyzer is assembled based on the Ni vacancies-enriched LDH, which realized a continuous synthesis of highly-pure 2,5-furandicarboxylic acid products with high yields (95%) and FE (90%).

Electro-oxidation of 5-hydroxymethylfurfural in a low-concentrated alkaline electrolyte by enhancing hydroxyl adsorption over a single-atom supported catalyst.

Electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), a sustainable strategy to produce bio-based plastic monomer, is always conducted in a high-concentration alkaline solution (1.0 mol L-1 KOH) for high activity. However, such high concentration of alkali poses challenges including HMF degradation and high operation costs associated with product separation. Herein, we report a single-atom-ruthenium supported on Co3O4 (Ru1-Co3O4) as a catalyst that works efficiently in a low-concentration alkaline electrolyte (0.1 mol L-1 KOH), exhibiting a low potential of 1.191 V versus a reversible hydrogen electrode to achieve 10 mA cm-2 in 0.1 mol L-1 KOH, which outperforms previous catalysts. Electrochemical studies demonstrate that single-atom-Ru significantly enhances hydroxyl (OH-) adsorption with insufficient OH- supply, thus improving HMF oxidation. To showcase the potential of Ru1-Co3O4 catalyst, we demonstrate its high efficiency in a flow reactor under industrially relevant conditions. Eventually, techno-economic analysis shows that substitution of the conventional 1.0 mol L-1 KOH with 0.1 mol L-1 KOH electrolyte may significantly reduce the minimum selling price of FDCA by 21.0%. This work demonstrates an efficient catalyst design for electrooxidation of biomass working without using strong alkaline electrolyte that may contribute to more economic biomass electro-valorization.

Synergistic Lewis and Brønsted Acid Sites Promote OH* Formation and Enhance Formate Selectivity: Towards High-efficiency Glycerol Valorization.

As a sustainable valorization route, electrochemical glycerol oxidation reaction (GOR) involves in formation of key OH* and selective adsorption/cleavage of C-C(O) intermediates with multi-step electron transfer, thus suffering from high potential and poor formate selectivity for most non-noble-metal-based electrocatalysts. So, it remains challenging to understand the structure-property relationship as well as construct synergistic sites to realize high-activity and high-selectivity GOR. Herein, we successfully achieve dual-high performance with low potentials and superior formate selectivity for GOR by forming synergistic Lewis and Brønsted acid sites in Ni-alloyed Co-based spinel. The optimized NiCo oxide solid-acid electrocatalyst exhibits low reaction potential (1.219 V@10 mA/cm2) and high formate selectivity (94.0 %) toward GOR. In situ electrochemical impedance spectroscopy and pH-dependence measurements show that the Lewis acid centers could accelerate OH* production, while the Brønsted acid centers are proved to facilitate high-selectivity formation of formate. Theoretical calculations reveal that NiCo alloyed oxide shows appropriate d-band center, thus balancing adsorption/desorption of C-O intermediates. This study provides new insights into rationally designing solid-acid electrocatalysts for biomass electro-upcycling.

Cross-linked α-Ni(OH)2 nanosheets with a Ni3+-rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural.

Electrochemical oxidation of biomass-based 5-hydroxymethylfurfural (HMF) is an effective approach for achieving the high-value products of 2,5-furandicarboxylic acid (FDCA). However, the restricted formation of high-valence metal active species for electrocatalysts results in a sluggish kinetic process of HMF oxidation reaction (HMFOR). Herein, we fabricated the Ni3+-rich cross-linked α-Ni(OH)2 nanosheets for accelerating the HMFOR through an anion-mediated strategy. It is identified that the Cl- ions with strong penetrability replace a portion of lattice oxygen atoms in α-Ni(OH)2 to form Ni-Cl bonds, contributing to breaking the inherent lattice order and generating a special Ni3+-rich structure. Owing to the promoted adsorption and accelerated oxidation of hydroxyl and aldehyde groups by the affluent Ni3+ active species, the large oxidation current density of 116.5 mA cm-2 and HMFOR kinetic constant of 0.067 min-1 has been achieved at 1.45 V (vs. RHE). By analyzing the oxidation products, the FDCA yield and Faradic efficiency are both higher than 99.25 % and 99.36 % for five successive determinations. Therefore, this work provides an insightful anion-mediated strategy for designing high-performance electrocatalysts for biomass conversion application.

Integrated Tandem Electrochemical-chemical-electrochemical Coupling of Biomass and Nitrate to Sustainable Alanine.

Alanine is widely employed for synthesizing polymers, pharmaceuticals, and agrochemicals. Electrocatalytic coupling of biomass molecules and waste nitrate is attractive for the nitrate removal and alanine production under ambient conditions. However, the reaction efficiency is relatively low due to the activation of the stable substrates, and the coupling of two reactive intermediates remains challenging. Herein, we realize the integrated tandem electrochemical-chemical-electochemical synthesis of alanine from the biomass-derived pyruvic acid (PA) and waste nitrate (NO3 - ) catalyzed by PdCu nano-bead-wires (PdCu NBWs). The overall reaction pathway is demonstrated as a multiple-step catalytic cascade process via coupling the reactive intermediates NH2 OH and PA on the catalyst surface. Interestingly, in this integrated tandem electrochemical-chemical-electrochemical catalytic cascade process, Cu facilitates the electrochemical reduction of nitrate to NH2 OH intermediates, which chemically couple with PA to form the pyruvic oxime, and Pd promotes the electrochemical reduction of pyruvic oxime to the desirable alanine. This work provides a green strategy to convert waste NO3 - to wealth and enriches the substrate scope of renewable biomass feedstocks to produce high-value amino acids.

Highly Efficient Biomass Upgrading by a Ni-Cu Electrocatalyst Featuring Passivation of Water Oxidation Activity.

Electricity-driven organo-oxidations have shown an increasing potential recently. However, oxygen evolution reaction (OER) is the primary competitive reaction, especially under high current densities, which leads to low Faradaic efficiency (FE) of the product and catalyst detachment from the electrode. Here, we report a bimetallic Ni-Cu electrocatalyst supported on Ni foam (Ni-Cu/NF) to passivate the OER process while the oxidation of 5-hydroxymethylfurfural (HMF) is significantly enhanced. A current density of 1000 mA cm-2 can be achieved at 1.50 V vs. reversible hydrogen electrode, and both FE and yield keep close to 100 % over a wide range of potentials. Both experimental results and theoretical calculations reveal that Cu doping impedes the OH* deprotonation to O* and hereby OER process is greatly passivated. Those instructive results provide a new approach to realizing highly efficient biomass upgrading by regulating the OER activity.

Electrochemical Aldehyde Oxidation at Gold Electrodes: gem-Diol, non-Hydrated Aldehyde, and Diolate as Electroactive Species.

To date the electroactive species of selective aldehyde oxidation to carboxylates at gold electrodes is usually assumed to be the diolate. It forms with high concentration only in very alkaline electrolytes, when OH- binds to the carbonyl carbon atom. Accordingly, the electrochemical upgrading of biomass-derived aldehydes to carboxylates is believed to be limited to very alkaline electrolytes at many electrode materials. However, OH- -induced aldehyde decomposition in these electrolytes prevents application of electrochemical aldehyde oxidation for the sustainable upgrading of biomass to value-added chemicals at industrial scale. Here, we demonstrate the successful oxidation of aliphatic aldehydes at a rotating gold electrode at pH 12, where only 1 % of the aldehyde resides as the diolate species. This concentration is too small to account for the observed current, which shows that also other aldehyde species (i. e., the geminal diol and the non-hydrated aldehyde) are electroactive. This insight allows developing strategies to omit aldehyde decomposition while achieving high current densities for the selective aldehyde oxidation, making its future industrial application viable.

Rechargeable Biomass Battery for Electricity Storage/generation and Concurrent Valuable Chemicals Production.

The development of a rechargeable battery that can produce valuable chemicals in both electricity storage and generation processes holds great promise for increasing the electron economy and economic value. However, this battery has yet to be explored. Herein, we report a biomass flow battery that generates electricity while producing furoic acid, and store electricity while yielding furfuryl alcohol. The battery is composed of a rhodium-copper (Rh1 Cu) single-atom alloy as anode, a cobalt-doped nickel hydroxide (Co0.2 Ni0.8 (OH)2 ) as cathode, and furfural-containing anolyte. In a full battery evaluation, this battery displays an open circuit voltage (OCV) of 1.29 V and a peak power density up to 107 mW cm-2 , surpassing most catalysis-battery hybrid systems. As a proof-of-concept, we demonstrate that this battery produces 1 kg furoic acid with 0.78 kWh electricity output, and yields 0.62 kg furfuryl alcohol when 1 kWh electricity is stored. This work may shed light on the design of rechargeable batteries with value-added functionality such as chemicals production.

Comprehensive Study Addressing the Challenge of Efficient Electrocatalytic Biomass Upgrading of 5-(Hydroxymethyl)Furfural (HMF) with a CH3 NH2 Ionic Liquid on Metal-Embedded Mo2 B2 MBene Nanosheets.

Amine-containing derivatives are important intermediates in drug manufacturing; sustainable synthesis of amine compounds from green carbon-based biomass derivatives has attracted increasing attention, especially the reductive amination of biomass molecules via electrochemical upgrading. To achieve efficient reductive amination of 5-(hydroxymethyl)furfural (HMF) via electrocatalytic biomass upgrading, this work proposes a new HMF biomass upgrading strategy based on metal supported on Mo2 B2 MBene nanosheets using a density functional theory comprehensive study. HMF and methylamine (CH3 CH2 ) can be reduced to 5-(hydroxymethyl) aldiminefurfural (HMMAMF) via electrocatalytic biomass upgrading, which is identified as a promising technology to produce pharmaceutical intermediates. Based on the proposed reaction mechanisms of HMF reductive amination, this work performs a systematic study of HMF amination to HMMAMF using an atomic model simulation method. This study aims to design a high-efficiency catalyst based on Mo2 B2 @TM nanosheets via the reductive amination of 5-HMF and provide insights into the intrinsic relation between thermochemical and material electronic properties and the role of dopant metals. This work establishes the Gibbs free energy profiles of each reaction HMF Biomass Upgrading on Mo2 B2 systems and obtained the limiting potentials of the rate-determining step, which included the kinetic stability of dopants, HMF adsorbability, and the catalytic activity and selectivity of the hydrogen evolution reaction or surface oxidation. Furthermore, charge transfer, d-band center (εd ), and material property (φ) descriptors are applied to establish a linear correlation to determine promising candidate catalysts for reductive amination of HMF. The candidates Mo2 B2 @Cr, Mo2 B2 @Zr, Mo2 B2 @Nb, Mo2 B2 @Ru, Mo2 B2 @Rh, and Mo2 B2 @Os are suitable high-efficiency catalysts for HMF amination. This work may contribute to the experimental application of biomass upgrading catalysts for biomass energy and guide the future development of biomass conversion strategies and utilization.

Processing renewable and waste-based feedstocks with fluid catalytic cracking: Impact on catalytic performance and considerations for improved catalyst design.

Refiners around the globe are either considering or are actively replacing a portion of their crude oil inputs originating from fossil sources with alternative sources, including recycled materials (plastics, urban waste, mixed solid waste) and renewable materials (bio-mass waste, vegetable oils). In this paper, we explore such replacement, specifically focusing on the fluid catalytic cracking (FCC) operation. Five pyrolysis oils, obtained from municipal solid waste (MSW) and biogenic material (olive stones/pits), were fully characterized and tested at 10% loading against a standard fluid catalytic cracking (FCC) vacuum gasoil (VGO) feed in a bench scale reactor using an industrially available fluid catalytic cracking catalyst based on ultrastable Y zeolite to simulate fluid catalytic cracking co-processing. Despite having unique feed properties, including high Conradson carbon (e.g., up to 19.41 wt%), water (e.g., up to 5.7 wt%), and contaminants (e.g., up to 227 ppm Cl) in some cases, the five pyrolysis oils gave similar yield patterns as vacuum gasoil. Gasoline was slightly (ca. 1 wt%) higher in all cases and LPG slightly (ca. 1 wt%) lower. Olefinicity in the LPG streams were unchanged, bottoms and light cycle oil (LCO) showed no significant changes, while dry gas was slightly (up to -0.2 wt%) lower. Coke selectivity was also unchanged (maximum -7.7 wt%, relatively), suggesting minimal to no heat balance concerns when co-processing in an industrial fluid catalytic cracking unit. The results demonstrate the applicability of municipal solid waste and biogenic originating pyrolysis oils into a refinery. A catalyst design concept is explored, based on higher rare Earth oxide exchange and/or utilization of ZSM-5 zeolite, that would further minimize the impacts of replacing fossil oils with pyrolysis oils, namely one that shifts the 1% higher gasoline into LPG.

Environmental life cycle assessment (E-LCA) and social impact assessment (SIA) of small-scale biorefineries implemented in rural zones: the avocado (Persea Americana var. Americana) case in Colombia.

The objective of this study is to compare the environmental and social performance of two small-scale avocado biorefineries implanted in a rural zone in the North of Colombia. Two small-scale biorefineries were proposed. Small-B1 addressed to produce avocado oil and animal feed, and Small-B2 focused on the guacamole production. The environmental analysis was done by applying the life cycle assessment methodology. Then, agronomic information and process simulation were required to complete the analysis. Moreover, the water footprint of the avocado crops was estimated. Both biorefineries were compared with the direct avocados production and commercialization. The social assessment was achieved by the estimation of quantitative indicators related to wages, jobs, and working hours. The agricultural carbon and water footprints of the creole avocado crop were 0.59 kg CO2-eq/kg and 2.13 m3/kg. In the same way, Small-B1 and Small-B2 obtained a carbon and water footprints of 8.99 kg CO2-eq/kg and 6.63 m3/kg and 0.72 kg CO2-eq/kg and 1.38 m3/kg, respectively. The hotspots of the creole avocado crop are related to the use of fertilizers and fungicides. Then, new strategies should be implemented to reduce the farmer's dependency. The social analysis exhibit a high resilience of the Small-B1 biorefinery since a salary increase to worker about 50% can be proposed. In addition, the installation of this biorefinery can create more than ten jobs. A disjunction was found between the economic, environmental, and social analyses. Thus, the need to establish a multidimensional strategy to design sustainable biorefineries is presented.

Advances in Selective Electrochemical Oxidation of 5-Hydroxymethylfurfural to Produce High-Value Chemicals.

The conversion of biomass is a favorable alternative to the fossil energy route to solve the energy crisis and environmental pollution. As one of the most versatile platform compounds, 5-hydroxymethylfural (HMF) can be transformed to various value-added chemicals via electrolysis combining with renewable energy. Here, the recent advances in electrochemical oxidation of HMF, from reaction mechanism to reactor design are reviewed. First, the reaction mechanism and pathway are summarized systematically. Second, the parameters easy to be ignored are emphasized and discussed. Then, the electrocatalysts are reviewed comprehensively for different products and the reactors are introduced. Finally, future efforts on exploring reaction mechanism, electrocatalysts, and reactor are prospected. This review provides a deeper understanding of mechanism for electrochemical oxidation of HMF, the design of electrocatalyst and reactor, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications.

Electrocatalytic Biomass Upgrading of Furfural using Transition-Metal Borides via Density Functional Theory Investigation.

Electrocatalytic biomass upgrading has proven to be an effective technique for generating value-added products. Herein, the design and development of furfural upgrading using transition-metal borides (MBenes) with simultaneous production of hydrogen are presented. Using density functional theory, the stabilities, selectivities, and activities of 13 MBene candidates are systematically evaluated for furfural upgrading. This research suggests that Fe2 B2 can serve as a promising electrocatalyst for the formation of furoic acid (FAC), with a limiting potential of -0.15 V, and 5-hydroxy-2(5H)-furanone (HFO), with a limiting potential of -0.93 V. Furthermore, Fe2 B2 and Mn2 Fe2 are shown to exhibit favorable limiting potentials of -1.35 and -1.36 V, respectively, for producing 6-hydroxy-2.3-dihydro-6H-pyrano-3-one (HDPO), indicating that they may also serve as electrocatalysts. Based on Sabatier's principle, a descriptor (φ) of material properties is developed for screening catalysts with high catalytic activity considering the electronegativities and d-electron number of metals. Additionally, surface redox potential, electronic properties, and charge-density differences are determined for Fe2 B2 , which is estimated to exhibit high catalytic activity for the oxidation of furfural to FAC and HFO.

Heterogeneous-Interface-Enhanced Adsorption of Organic and Hydroxyl for Biomass Electrooxidation.

Electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) provides an efficient way to obtain high-value-added biomass-derived chemicals. Compared with other transition metal oxides, CuO exhibits poor oxygen evolution reaction performance, leading to high Faraday efficiency for HMF oxidation. However, the weak adsorption and activation ability of CuO to OH- species restricts its further development. Herein, the CuO-PdO heterogeneous interface is successfully constructed, resulting in an advanced onset-potential of the HMF oxidation reaction (HMFOR), a higher current density than CuO. The results of open-circuit potential, in situ infrared spectroscopy, and theoretical calculations indicate that the introduction of PdO enhances the adsorption capacity of the organic molecule. Meanwhile, the CuO-PdO heterogeneous interface promotes the adsorption and activation of OH- species, as demonstrated by zeta potential and electrochemical measurements. This work elucidates the adsorption enhancement mechanism of heterogeneous interfaces and provides constructive guidance for designing efficient multicomponent electrocatalysts in organic electrocatalytic reactions.

Electrocatalytic Hydrogenation of 5-Hydroxymethylfurfural Promoted by a Ru1 Cu Single-Atom Alloy Catalyst.

Electrochemical reduction of biomass-derived 5-hydroxymethylfurfural (HMF) represents an elegant route toward sustainable value-added chemicals production that circumvents the use of fossil fuel and hydrogen. However, the reaction efficiency is hampered by the high voltage and low activity of electrodes (Cu, Bi, Pb). Herein, we report a Ru1 Cu single-atom alloy (SAA) catalyst with isolated Ru atoms on Cu nanowires that exhibits an electrochemical reduction of HMF to 2,5-dihydroxymethylfuran (DHMF) with promoted productivity (0.47 vs. 0.08 mmol cm-2 h-1 ) and faradic efficiency (FE) (85.6 vs. 71.3 %) at -0.3 V (vs. RHE) compared with Cu counterpart. More importantly, the FE (87.5 %) is largely retained at high HMF concentration (100 mM). Kinetic studies by using combined electrochemical techniques suggest disparate mechanisms over Ru1 Cu and Cu, revealing that single-atom Ru promotes the dissociation of water to produce H* species that effectively react with HMF via an electrocatalytic hydrogenation (ECH) mechanism.

Electroreductive CO coupling of benzaldehyde over SACs Au-NiMn2O4 spinel synergetic composites.

Electroreductive CO coupling provides a prospective strategy for biomass derivative upgrading via reducing the number of oxygen-containing functional groups and increasing their molecular weight. However, exploring superior electrocatalysts with effective reactivity and high selectivity for target products are still a challenge. In this work, single atom Au surface derived NiMn2O4 (SACs Au-NiMn2O4) spinel synergetic composites were fabricated by a versatile adsorption-deposition method and applied in electroreductive self-coupling of benzaldehyde to dibenzyl ether. The SACs Au-NiMn2O4 spinel synergetic composites enhanced electroreductive coupling of benzaldehyde, significantly improved the yield and selectivity of dibenzyl ether. Systematic characterizations and density functional theory calculation revealed that atomically dispersed Au occupied surface Ni2+ vacancies, which played a dominated role in CO coupling of benzaldehyde. Detailed calculation results showed that benzaldehyde preferred to adsorb on Ni octa-hedral sites of NiMn2O4 spinel synergetic structure, single atom Au surficial derivation over NiMn2O4 further reduced the adsorption energy (Eads) of benzaldehyde on SACs Au-NiMn2O4, thus the CO coupling of benzaldehyde to dibenzyl ether was promoted. Moreover, single atom Au surficial derivation lowered the energy barrier of rate-determining step, facilitated the formation of dibenzyl ether species. Our work also paves an avenue for rational design single atom materials using spinel as support.

Hydrogen Spillover-Enhanced Heterogeneously Catalyzed Hydrodeoxygenation for Biomass Upgrading.

Hydrodeoxygenation (HDO) is regarded as a promising technology for biomass upgrading to obtain sustainable and competitive chemicals and fuels. In fact, biomass HDO over heterogeneous solid catalysts is often accompanied by the phenomenon of hydrogen spillover, which further affects the catalytic performance. Thus, it is necessary to gain in-depth understand the promoting effect of hydrogen spillover in the biomass HDO process to obtain desired conversion and selectivity. This Review summarized the extensive research on hydrogen spillover in biomass refining and discussed in detail the regulation mechanism of hydrogen spillover in biomass HDO process, mainly by regulating different active center sites on catalyst supports, such as metal sites, acid sites, surface functional groups, and defective sites, which exhibit independent and synergistic characteristics promoting catalyst activity, selectivity, and stability. Finally, the prospective of hydrogen spillover in biomass HDO applications was critically evaluated, and the key technical challenges in developing "hydrogen-free" HDO and upgrading biofuels were highlighted. The presentation of hydrogen spillover-enhanced catalytic biomass HDO in this Review will hopefully provide insight and guidance for further development of efficient catalysts and preparation of high-value chemicals in the future.

Selective Electrooxidation of Biomass-Derived Alcohols to Aldehydes in a Neutral Medium: Promoted Water Dissociation over a Nickel-Oxide-Supported Ruthenium Single-Atom Catalyst.

The biomass-derived alcohol oxidation reaction (BDAOR) holds great promise for sustainable production of chemicals. However, selective electrooxidation of alcohols to value-added aldehyde compounds is still challenging. Herein, we report the electrocatalytic BDAORs to selectively produce aldehydes using single-atom ruthenium on nickel oxide (Ru1 -NiO) as a catalyst in the neutral medium. For electrooxidation of 5-hydroxymethylfurfural (HMF), Ru1 -NiO exhibits a low potential of 1.283 V at 10 mA cm-2 , and an optimal 2,5-diformylfuran (DFF) selectivity of 90 %. Experimental studies reveal that the neutral electrolyte plays a critical role in achieving a high aldehyde selectivity, and the single-atom Ru boosts HMF oxidation in the neutral medium by promoting water dissociation to afford OH*. Furthermore, Ru1 -NiO can be extended to selective electrooxidation of a series of biomass-derived alcohols to corresponding aldehydes, which are conventionally difficult to obtain in the alkaline medium.

Tailoring Competitive Adsorption Sites by Oxygen-Vacancy on Cobalt Oxides to Enhance the Electrooxidation of Biomass.

The electrooxidation of 5-hydroxymethylfurfural (HMF) offers a promising green route to attain high-value chemicals from biomass. The HMF electrooxidation reaction (HMFOR) is a complicated process involving the combined adsorption and coupling of organic molecules and OH- on the electrode surface. An in-depth understanding of these adsorption sites and reaction processes on electrocatalysts is fundamentally important. Herein, the adsorption behavior of HMF and OH- , and the role of oxygen vacancy on Co3 O4 are initially unraveled. Correspondingly, instead of the competitive adsorption of OH- and HMF on the metal sites, it is observed that the OH- can fill into oxygen vacancy (Vo) prior to couple with organic molecules through lattice oxygen oxidation reaction process, which could accelerate the rate-determining step of the dehydrogenation of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) intermediates. With the modulated adsorption sites, the as-designed Vo-Co3 O4 shows excellent activity for HMFOR with the earlier potential of 90 and 120 mV at 10 mA cm-2 in 1 m KOH and 1 m PBS solution. This work sheds insight on the catalytic mechanism of oxygen vacancy, which benefits designing a novel electrocatalysts to modulate the multi-molecules combined adsorption behaviors.