Impact of a High-Fat Meal on the Pharmacokinetics of Sotorasib, a KRAS G12C Inhibitor.

Sotorasib is a small molecule drug that specifically and irreversibly inhibits the KRAS p.G12C mutant protein. This analysis investigated the impact of a high-calorie high-fat meal on the pharmacokinetics, safety, and tolerability of sotorasib in both healthy volunteers and patients with KRAS G12C advanced solid tumors. Each subject received a single oral dose of 360 or 960 mg of sotorasib under fasted conditions or with a high-fat meal (fed conditions). The geometric least squares means (GLSM) ratios (fed/fasted) for 360 mg of sotorasib Cmax and AUCinf were 1.03 and 1.38, respectively, in healthy volunteers (N = 14). The GLSM ratios (fed/fasted) for Cmax and AUC0-24h were 1.38 and 1.75, respectively, with 360 mg of sotorasib in cancer patients (N = 2). The GLSM ratios (fed/fasted) for Cmax and AUC0-24h were 0.660 and 1.25, respectively, with 960 mg of sotorasib in cancer patients (N = 8). Sotorasib was well tolerated in fast and fed conditions. The impact of a high-fat meal on sotorasib exposure is less than a 2-fold increase or decrease in Cmax and AUCs.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Fexofenadine.

In this monograph, the potential use of methods based on the Biopharmaceutics Classification System (BCS) framework to evaluate the bioequivalence of solid immediate-release (IR) oral dosage forms containing fexofenadine hydrochloride as a substitute for a pharmacokinetic study in human volunteers is investigated. We assessed the solubility, permeability, dissolution, pharmacokinetics, pharmacodynamics, therapeutic index, bioavailability, drug-excipient interaction, and other properties using BCS recommendations from the ICH, FDA and EMA. The findings unequivocally support fexofenadine's classification to BCS Class IV as it is neither highly soluble nor highly permeable. Further impeding the approval of generic equivalents through the BCS-biowaiver pathway is the reference product's inability to release ≥ 85 % of the drug substance within 30 min in pH 1.2 and pH 4.5 media. According to ICH rules, BCS class IV drugs do not qualify for waiving clinical bioequivalence studies based on the BCS, even though fexofenadine has behaved more like a BCS class I/III than a class IV molecule in pharmacokinetic studies to date and has a wide therapeutic index.

Bridging the gap: The future of biosimilars regulations.

Biosimilar vaccines and immunotherapeutic are innovative approaches in medical research. This commentary addresses the current disparities in regulations of biosimilar vaccines and immunotherapeutic products across different nations. It also navigates the benefits of global regulatory alignment and challenges that may be encountered. The current discrepancies in regulations across different countries, which pose significant challenges for the development and approval of biosimilar vaccines and immunotherapeutic products. These disparities often lead to delayed market access, increased development costs, and hindered innovation. The commentary stresses that such obstacles could be mitigated through harmonized regulations, resulting in faster approvals, reduced healthcare costs, and improved patient outcomes. Moreover, the commentary explores the specific complexities associated with biosimilar vaccines and immunotherapeutic, such as the intricate evaluation of biosimilarity due to their molecular composition and immunogenic properties. In conclusion, the editorial advocates for collaborative efforts to overcome the challenges in achieving global regulatory harmonization for biosimilars. This includes establishing uniform standards, fostering international cooperation among regulatory agencies, and promoting educational initiatives for healthcare providers and regulators. The ultimate goal is to ensure that patients worldwide have timely access to safe, effective, and affordable biosimilar treatments.

Qualification of In Vitro Dissolution Absorption System 2 (IDAS2) with Caco-2 and MDCK Cell Monolayers: Dose Sensitivity Study Using BCS Class I and III Drugs.

This study aimed to validate the In vitro Dissolution Absorption System 2 (IDAS2) containing a biological barrier of Caco-2 or Madin-Darby canine kidney (MDCK) cell monolayer through dose sensitivity studies. Metoprolol and propranolol were selected as Biopharmaceutics Classification System (BCS) Class I model drugs, and atenolol as a Class III model drug. The IDAS2 is comprised of a dissolution vessel (500 mL) and two permeation chambers (2 × 8.0 mL) mounted with Caco-2 or MDCK cell monolayer. One or two immediate-release tablet(s) of the model drug were added to the dissolution vessel, and the time profiles of dissolution and permeation were observed. Greater than 85% of metoprolol and propranolol (tested at two dosing concentrations) were dissolved by 15 min, and all drugs were fully dissolved by 30 min. All three drugs were more permeable across Caco-2 cells than MDCK cells with a linear increase in permeation across both cells at both dose concentrations. Thus, the dose sensitivity of the IDAS2 was demonstrated using both cell barriers. These results indicate a successful qualification of IDAS2 for the development/optimization of oral formulations and that MDCK cells can be utilized as a surrogate for Caco-2 cells.

Physiologically Based Biopharmaceutics Modeling for Gefapixant IR Formulation Development and Defining the Bioequivalence Dissolution Safe Space.

Gefapixant is a weakly basic drug which has been formulated as an immediate release tablet for oral administration. A physiologically based biopharmaceutics model (PBBM) was developed based on gefapixant physicochemical properties and clinical pharmacokinetics to aid formulation selection, bioequivalence safe space assessment and dissolution specification settings. In vitro dissolution profiles of different free base and citrate salt formulations were used as an input to the model. The model was validated against the results of independent studies, which included a bioequivalence and a relative bioavailability study, as well as a human ADME study, all meeting acceptance criteria of prediction errors ≤ 20% for both Cmax and AUC.  PBBM was also applied to evaluate gastric pH-mediated drug-drug-interaction potential with co-administration of a proton pump inhibitor (PPI), omeprazole. Model results showed good agreement with clinical data in which omeprazole lowered gefapixant exposure for the free base formulation but did not significantly alter gefapixant pharmacokinetics for the citrate based commercial drug product. An extended virtual dissolution bioequivalence safe space was established.  Gefapixant drug product batches are anticipated to be bioequivalent with the clinical reference batch when their dissolution is > 80% in 60 minutes. PBBM established a wide dissolution bioequivalence space as part of assuring product quality.

Investigation of real-life drug intake behaviour in older adults and geriatric patients in Northern Germany - A biopharmaceutical perspective.

Dosing conditions (type and amount of accompanying fluid, the type of food, the time of administration, and dosage form modifications such as crushing tablets) are critical and affect the performance of oral dosage forms in the gastrointestinal tract and thus bioavailability. Because older adults are the primary users of medications and are more susceptible to adverse effects, it is important to understand how they take their medications in order to reduce risks and increase benefits of the pharmacotherapy. The aim of the study was to investigate the real-life drug intake behaviour in geriatric patients and older adults and discuss their influence on drug absorption after oral administration. The data from two settings home vs. hospital and genders women vs. men were presented. A questionnaire study was performed among people aged at least 65 years from two settings (hospital vs. home), recruited mostly from community pharmacies and a regional hospital in Mecklenburg - Western Pomerania. The obtained data demonstrates that older adults and geriatric patients take their medications in the same way regardless of the setting and gender. There were no significant differences. Interviewed participants were mostly adherent to the doctor's recommendations and mostly took their medications in the same way every day. Medications are most commonly taken with a small (100 mL) or large (200 mL) glass of noncarbonated water, after food (during or after breakfast 64 % of intakes in the morning and during or after dinner 81 % of intakes in the evening). Meal usually consisted of bread, either with jam or honey (breakfast), or ham and cheese (dinner). All reported dosage form modifications were made to tablets. In almost all cases it was splitting the tablet, which was performed due to doctor's indication.

Physiologically Based Biopharmaceutics Modeling (PBBM): Best Practices for Drug Product Quality, Regulatory and Industry Perspectives: 2023 Workshop Summary Report.

Physiologically based biopharmaceutics modeling (PBBM) is used to elevate drug product quality by providing a more accurate and holistic understanding of how drugs interact with the human body. These models are based on the integration of physiological, pharmacological, and pharmaceutical data to simulate and predict drug behavior in vivo. Effective utilization of PBBM requires a consistent approach to model development, verification, validation, and application. Currently, only one country has a draft guidance document for PBBM, whereas other major regulatory authorities have had limited experience with the review of PBBM. To address this gap, industry submitted confidential PBBM case studies to be reviewed by the regulatory agencies; software companies committed to training. PBBM cases were independently and collaboratively discussed by regulators, and academic colleagues participated in some of the discussions. Successful bioequivalence "safe space" industry case examples are also presented. Overall, six regulatory agencies were involved in the case study exercises, including ANVISA, FDA, Health Canada, MHRA, PMDA, and EMA (experts from Belgium, Germany, Norway, Portugal, Spain, and Sweden), and we believe this is the first time such a collaboration has taken place. The outcomes were presented at this workshop, together with a participant survey on the utility and experience with PBBM submissions, to discuss the best scientific practices for developing, validating, and applying PBBMs. The PBBM case studies enabled industry to receive constructive feedback from global regulators and highlighted clear direction for future PBBM submissions for regulatory consideration.

Validation of a Caco-2 microfluidic Chip model for predicting intestinal absorption of BCS Class I-IV drugs.

Oral delivery is considered the most patient preferred route of drug administration, however, the drug must be sufficiently soluble and permeable to successfully formulate an oral formulation. There have been advancements in the development of more predictive solubility and dissolution tools, but the tools that has been developed for permeability assays have not been validated as extensively as the gold-standard Caco-2 Transwell assay. Here, we evaluated Caco-2 intestinal permeability assay in Transwells and a commercially available microfluidic Chip using 19 representative Biopharmaceutics Classification System (BCS) Class I-IV compounds. For each selected compound, we performed a comprehensive viability test, quantified its apparent permeability (Papp), and established an in vitro in vivo correlation (IVIVC) to the human fraction absorbed (fa) in both culture conditions. Permeability differences were observed across the models as demonstrated by antipyrine (Transwell Papp: 38.5 ± 6.1 × 10-8 cm/s vs Chip Papp: 32.9 ± 11.3 × 10-8 cm/s) and nadolol (Transwell Papp: 0.6 ± 0.1 × 10-7 cm/s vs Chip Papp: 3 ± 1.2 × 10-7 cm/s). The in vitro in vivo correlation (IVIVC; Papp vs. fa) of the Transwell model (r2 = 0.59-0.83) was similar to the Chip model (r2 = 0.41-0.79), highlighting similar levels of predictivity. Comparing to historical data, our Chip Papp data was more closely aligned to native tissues assessed in Ussing chambers. This is the first study to comprehensively validate a commercial Gut-on-a-Chip model as a predictive tool for assessing oral absorption to further reduce our reliance on animal models.

The Use of Global Sensitivity Analysis to Assess the Oral Absorption of Weakly Basic Compounds: A Case Example of Dipyridamole.

OBJECTIVE: To utilize the global system analysis (GSA) in oral absorption modeling to gain a deeper understanding of system behavior, improve model accuracy, and make informed decisions during drug development. METHODS: GSA was utilized to give insight into which drug substance (DS), drug product (DP), and/or physiological parameter would have an impact on peak plasma concentration (Cmax) and area under the curve (AUC) of dipyridamole as a model weakly basic compound. GSA guided the design of in vitro experiments and oral absorption risk assessment using FormulatedProducts v2202.1.0. The solubility and precipitation profiles of dipyridamole in different bile salt concentrations were measured. The results were then used to build a mechanistic oral absorption model. RESULTS: GSA warranted further investigation into the precipitation kinetics and its link to the levels of bile salt concentrations. Mechanistic modeling studies demonstrated that a precipitation-integrated modeling approach appropriately predicted the mean plasma profiles, Cmax, and AUC from the clinical studies. CONCLUSIONS: This work shows the value of GSA utilization in early development to guide in vitro experimentation and build more confidence in identifying the critical parameters for the mathematical models.

The myeloperoxidase inhibitor mitiperstat (AZD4831) does not prolong the QT interval at expected therapeutic doses.

Mitiperstat is a myeloperoxidase inhibitor in clinical development for treatment of patients with heart failure and preserved or mildly reduced ejection fraction, non-alcoholic steatohepatits and chronic obstructive pulmonary disease. We aimed to assess the risk of QT-interval prolongation with mitiperstat using concentration-QT (C-QT) modeling. Healthy male volunteers were randomized to receive single oral doses of mitiperstat 5, 15, 45, 135, or 405 mg (n = 6 per dose) or matching placebo (n = 10) in a phase 1 study (NCT02712372). Time-matched pharmacokinetic and digital electrocardiogram data were collected at the baseline (pre-dose) and at 11 time-points up to 48 h post-dose. C-QT analysis was prespecified as an exploratory objective. The prespecified linear mixed effects model used baseline-adjusted QT interval corrected for the heart rate by Fridericia's formula (ΔQTcF) as a dependent variable and plasma mitiperstat concentration as an independent variable. Initial exploratory analyses indicated that all model assumptions were met (no effect on heart rate; appropriate use of QTcF; no hysteresis; linear concentration-response relationship). Model-predicted mean baseline-corrected and placebo-adjusted ΔΔQTcF was +0.73 ms (90% confidence interval [CI]: -1.73, +3.19) at the highest anticipated clinical exposure (0.093 µmol/L) during treatment with mitiperstat 5 mg once daily. The upper 90% CI was below the established threshold of regulatory concern. The 16-fold margin to the highest observed exposure was high enough to mean that a positive control was not needed. Mitiperstat is not associated with risk of QT-interval prolongation at expected therapeutic concentrations.

Lack of Effect of Antioxidants on Biopharmaceutics Classification System (BCS) Class III Drug Permeability.

The addition of antioxidants to pharmaceutical products is a potential approach to inhibit nitrosamine formation, particularly in solid oral dosage forms like tablets and capsules. The objective was to assess the effect of ten antioxidants on the permeability of four Biopharmaceutics Classification System (BCS) Class III drugs. Bi-directional drug permeability studies in the absence and presence of antioxidants were performed in vitro across MDCK-II monolayers. No antioxidant increased drug permeability, while the positive control sodium lauryl sulfate always increased drug permeability. Results support that any of the ten antioxidants, up to at least 10 mg, can be added to a solid oral dosage form without modulating passive drug intestinal permeability. Additional considerations are also discussed.

Development of an extemporaneous preparation formulation using a simple and non-solubilizing matrix for first in human clinical study.

Extemporaneous preparation (EP) formulation is an attractive strategy to accelerate the formulation development of new chemical entities for first entry into human study. In this work, an EP suspension formulation for a development drug candidate GDC-6599 was successfully developed. The formulation spanned a wide concentration range from 0.1 to 2.0 mg/mL. A non-solubilizing vehicle, 0.6 % (w/v) methylcellulose solution was used to suspend GDC-6599. An aversive agent denatonium benzoate at an extremely low level (6 ppm) was applied as a taste masking agent. This enabled a simple matrix for the analysis of related substances from GDC-6599 during all stability studies. Microcrystalline cellulose at 10 mg/mL concentration was added to the EP formulation to generate a suspension appearance, leading to the success of using a single placebo for matching active formulation at all concentrations. The developed formulation demonstrated excellent homogeneity, sufficient stability and passed microbiological enumeration test. Rinsing performance test demonstrated that greater than 99.8 % amount of drug was successfully recovered by rinsing with water twice, providing guidance for clinical dosing. Biopharmaceutical assessment was conducted by both in silico simulation and in vitro tests. Greater than 90 % bioaccessibility of the EP suspension formulation was obtained via an in vitro system mimicking the human gastrointestinal absorption, consistent with the result from the in silico modeling. The developed EP formulation was successfully used to support the early single ascending dose (SAD) cohorts of GDC-6599 Phase I clinical study. The formulation matrix and assessment workflow developed in this work are generalizable as a platform for EP formulation development of new chemical entities for early phase clinical studies.

Understanding the In Vitro-In Vivo Nexus: Advanced correlation models predict clinical performance of liposomal doxorubicin.

In the century of precision medicine and predictive modeling, addressing quality-related issues in the medical supply chain is critical, with 62 % of the disruptions being attributable to quality challenges. This study centers on the development and safety of liposomal doxorubicin, where animal studies alone often do not adequately explain the complex interplay between critical quality attributes and in vivo performances. Anchored in our aim to elucidate this in vitro-in vivo nexus, we compared TLD-1, a novel liposomal doxorubicin delivery system, against the established formulations Doxil® and Lipodox®. Robust in vitro-in vivo correlations (IVIVCs) with excellent coefficients of determination (R2 > 0.98) were obtained in the presence of serum under dynamic high-shear conditions. They provided the foundation for an advanced characterization and benchmarking strategy. Despite the smaller vesicle size and reduced core crystallinity of TLD-1, its release behavior closely resembled that of Doxil®. Nevertheless, subtle differences between the dosage forms observed in the in vitro setting were reflected in the bioavailabilities observed in vivo. Data from a Phase-I clinical trial facilitated the development of patient-specific IVIVCs using the physiologically-based nanocarrier biopharmaceutics model, enabling a more accurate estimation of doxorubicin exposure. This advancement could impact clinical practice by allowing for more precise dose estimation and aiding in the assessment of the interchangeability of generic liposomal doxorubicin.

Formulation, optimization and evaluation of ocular gel containing nebivolol Hcl-loaded ultradeformable spanlastics nanovesicles: In vitro and in vivo studies.

The study aims to improve the ocular delivery of Nebivolol HCL (NBV) belonging to the Biopharmaceutics classification system (BCSII) by using spanlastic nanovesicles (SNVs) for ophthalmic delivery and incorporating them into hydroxypropyl methylcellulose gel with ketorolac tromethamine (KET) as an anti-inflammatory to improve glaucoma complications like Conjunctivitis. SNVs were prepared by ethanol injection technique using span (60) as a surfactant and labrasol as an edge activator (EA). The impact of formulation factors on SNVs properties was investigated using a Box-Behnken design. In vitro evaluations showed that the formulations (F1, F4, and F14), containing Span 60 and labrasol as EA (25%, 50%, and 25%), exhibited high EE% with low PS and high ZP and DI. Additionally, 61.72 ± 0.77%, 58.97 ± 1.44%, and 56.20 ± 2.32% of the NBV amount were released from F1, F4, and F14 after 5 h, compared to 93.94 ± 1.21% released from drug suspension. The selected formula (G1), containing F1 in combination with KET and 2% w/w HPMC, exhibited 76.36 ± 0.90% drug release after 12 h. Ex vivo Confocal laser scanning revealed a high penetration of NBV-SNVs gel that ascertained the results of the in-vitro study. In vivo studies showed a significant decrease in glaucoma compared to drug suspension, and histopathological studies showed improvement in glaucomatous eye retinal atrophy. G1 is considered a promising approach to improving ocular permeability, absorption, and anti-inflammatory activity, providing a safer alternative to current regimens.

A Design-Conversed Strategy Establishes the Performance Safe Space for Doxorubicin Nanosimilars.

Nanomedicines exhibit multifaceted performances, yet their biopharmaceutics remain poorly understood and present several challenges in the translation from preclinical to clinical research. To address this issue and promote the production of high-quality nanomedicines, a systematic screening of the design space and in vivo performance is necessary. Establishing formulation performance specifications early on enables an informed selection of candidates and promotes the development of nanosimilars. The deconvolution of the pharmacokinetics enables the identification of key characteristics that influence their performances and disposition. Using an in vitro-in vivo rank-order relationship for doxorubicin nanoformulations, we defined in vitro release specifications for Doxil/Caelyx-like follow-on products. Additionally, our model predictions were used to establish the bioequivalence of Lipodox, a nanosimilar of Doxil/Caelyx. Furthermore, a virtual safe space was established, providing crucial insights into expected disposition kinetics and informing formulation development. By addressing bottlenecks in biopharmaceutics and formulation screening, our research advances the translation of nanomedicine from bench to bedside.

Drug solubility in biorelevant media in the context of an inhalation-based biopharmaceutics classification system (iBCS).

An inhalation-based Biopharmaceutics Classification System for pulmonary drugs (iBCS) holds the perspective to allow for scientifically sound prediction of differences in the in vivo performance of orally inhaled drug products (OIDPs). A set of nine drug substances were selected, that are administered via both the oral and pulmonary routes. Their solubility was determined in media representative for the oral (Fasted State Simulated Intestinal Fluid (FaSSIF)) and pulmonary (Alveofact medium and Simulated Lung Fluid (SLF)) routes of administration to confirm the need for a novel approach for inhaled drugs. The complexity of these media was then stepwise reduced with the purpose of understanding the contribution of their components to the solubilizing capacity of the media. A second reason for varying the complexity was to identify a medium that would allow robust but accurate dissolution testing. Hence, Hank's balanced salt solution (HBSS) as a medium used in many in vitro biological tests, non-buffered saline solution, and water were included. For some drug substances (salbutamol sulfate, tobramycin, isoniazid, and tiotropium bromide), no significant differences were observed between the solubility in the media used. For other drugs, however, we observed either just small (rifampicin, budesonide, salmeterol) or unexpectedly large differences (beclomethasone dipropionate). Based on the minimum theoretical solubility required for their common pulmonary dose in 10 ml of lung lining fluid, drug solubility was classified as either high or low. Two high solubility and two low solubility compounds were then selected for refined solubility testing in pulmonary relevant media by varying their content of phospholipids, surfactant proteins and other proteins. The solubility of drug substances in simulated lung lining fluids was found to be dependent on the physicochemical properties of the drug substance and the composition of the media. While a pulmonary dissolution medium that would fit all drugs could not be established, our approach may provide guidance for finding the most suitable dissolution medium for a given drug substance and better designing in vitro tests for predicting the in vivo performance of inhalable drug products.

Revolutionizing Psoriasis Topical Treatment: Enhanced Efficacy Through Ceramide/Phospholipid Composite Cerosomes Co-Delivery of Cyclosporine and Dithranol: In-Vitro, Ex-Vivo, and in-Vivo Studies.

Purpose: Improving the treatment of psoriasis is a serious challenge today. Psoriasis is an immune-mediated skin condition affecting 125 million people worldwide. It is commonly treated with cyclosporine-A (CsA) and dithranol (DTH). CsA suppresses the activation of T-cells, immune cells involved in forming psoriatic lesions. Meanwhile, DTH is a potent anti-inflammatory and anti-proliferative drug that effectively reduces the severity of psoriasis symptoms such as redness, scaling, and skin thickness. CsA and DTH belong to BCS class II with limited oral bioavailability. We aim to develop a drug delivery system for topical co-delivery of CsA and DTH, exploring its therapeutic potential. Methods: Firstly, we developed a niosomal drug delivery system based on ceramide IIIB to form Cerosomes. Cerosomes were prepared from a mixture of Ceramide, hyaluronic acid, and edge activator using a thin-film hydration technique. To co-deliver CsA and DTH topically for the treatment of psoriasis. These two hydrophobic drugs encapsulated into our synthesized positively charged particle cerosomes. Results:  Cerosomes had an average particle size of (222.36 nm± 0.36), polydispersity index of (0.415±0.04), Entrapment Efficiency of (96.91%± 0.56), and zeta potential of (29.36±0.38mV) for selected formula. In vitro, In silico, in vivo, permeation, and histopathology experiments have shown that cerosomes enhanced the skin penetration of both hydrophobic drugs by 66.7% compared to the CsA/DTH solution. Imiquimod (IMQ) induced psoriatic mice model was topically treated with our CsA/DTH cerosomes. We found that our formulation enhances the skin penetration of both drugs and reduces psoriasis area and severity index (PASI score) by 2.73 times and 42.85%, respectively, compared to the CsA/DTH solution. Moreover, it reduces the levels of proinflammatory cytokines, TNF-α, IL-10, and IL-6 compared to CsA/DTH solution administration. Conclusion: The Cerosomes nano-vesicle-containing CsA/DTH represents a more promising topical treatment for psoriasis, giving new hope to individuals with psoriasis, compared to commercial and other conventional alternatives.

Food-Drug Effects and Pediatric Drug Development Studies Submitted to the US Food and Drug Administration, 2012-2022.

Food effect (FE) studies characterize food-drug interactions that may alter the efficacy or safety of a drug, but these studies are not conducted in pediatric patients. Pediatric patients have substantial physiologic, anatomic, and dietary differences from adults, which may result in differences in their FE considerations. Therefore, the objective of this study was to identify oral drug products approved for use in pediatric patients aged <6 years with an FE observed in adults. Additional objectives were to summarize the therapeutic areas, pharmacokinetic effects, and labeling instructions that resulted from these studies. Publicly available data were searched for products studied in pediatric patients and approved for use by the United States Food and Drug Administration (FDA) from 2012 to 2022. Of the 102 oral drug products approved for use in patients aged <6 years, 43 recommended the consideration of food intake in the drug labeling. These included drug products recommended to be taken with food (n = 21, 49%) or without food (n = 14, 33%). Each of the 14 drug products recommended to be taken without food are approved for use in pediatric patients aged <2 years. The products approved for use in pediatric patients aged <2 years comprised the highest proportion with area under the plasma concentration-time curve extrapolated to infinity (AUCinf, n = 35, 75%) and maximum serum concentration (Cmax, n = 45, 80%) affected by food. Close monitoring is warranted during the postapproval period for products identified as having a significant FE in adults and that are approved for use in pediatric patients aged <6 years. Promising tools for predicting pediatric FE may include physiologically based pharmacokinetic absorption modeling.

Using molecularly dissolved drug concentrations in PBBMs improves the prediction of oral absorption from supersaturating formulations.

Predicting the absorption of drugs from enabling formulations is still challenging due to the limited capabilities of standard physiologically based biopharmaceutics models (PBBMs) to capture complex absorption processes. Amongst others, it is often assumed that both, molecularly and apparently dissolved drug in the gastrointestinal lumen are prone to absorption. A recently introduced method for measuring concentrations of molecularly dissolved drug in a dynamic in vitro dissolution setup using microdialysis has opened new opportunities to test this hypothesis and refine mechanistic PBBM approaches. In the present study, we compared results of PBBMs that used either molecularly or apparently dissolved concentrations in the simulated gastrointestinal lumen as input parameters. The in vitro dissolution data from three supersaturating formulations of Posaconazole (PCZ) were used as model input. The modeling outcome was verified using PCZ concentration vs. time profiles measured in human intestinal aspirates and in the blood plasma. When using apparently dissolved drug concentrations (i.e., the sum of colloid-associated and molecularly dissolved drug) the simulated systemic plasma exposures were overpredicted, most pronouncedly with the ASD-based tablet. However, if the concentrations of molecularly dissolved drug were used as input values, the PBBM resulted in accurate prediction of systemic exposures for all three PCZ formulations. The present study impressively demonstrated the value of considering molecularly dissolved drug concentrations as input value for PBBMs of supersaturating drug formulations.

iBCS: 3. A Biopharmaceutics Classification System for Orally Inhaled Drug Products.

In this article, we specify for the first time a quantitative biopharmaceutics classification system for orally inhaled drugs. To date, orally inhaled drug product developers have lacked a biopharmaceutics classification system like the one developed to navigate the development of immediate release of oral medicines. Guideposts for respiratory drug discovery chemists and inhalation product formulators have been elusive and difficult to identify due to the complexity of pulmonary physiology, the intricacies of drug deposition and disposition in the lungs, and the influence of the inhalation delivery device used to deliver the drug as a respirable aerosol. The development of an inhalation biopharmaceutics classification system (iBCS) was an initiative supported by the Product Quality Research Institute (PQRI). The goal of the PQRI iBCS working group was to generate a qualitative biopharmaceutics classification system that can be utilized by inhalation scientists as a "rule of thumb" to identify desirable molecular properties and recognize and manage CMC product development risks based on physicochemical properties of the drug and the deposited lung dose. Herein, we define the iBCS classes quantitatively according to the dose number and permeability. The proposed iBCS was evaluated for its ability to categorize marketed inhaled drugs using data from the literature. The appropriateness of the classification of each drug was assessed based on published development, clinical and nonclinical data, and mechanistic physiologically based biopharmaceutics modeling. The inhaled drug product development challenges for each iBCS classification are discussed and illustrated for different classes of marketed inhaled drugs. Finally, it is recognized that discriminatory laboratory methods to characterize regional lung deposition, dissolution, and permeability will be key to fully realizing the benefits of an iBCS to streamline and derisk inhaled drug development.