Microfluidic Rheology: An Innovative Method for Viscosity Measurement of Gels and Various Pharmaceuticals.

Measuring the viscosity of pharmaceutical dosage forms is a crucial process. Viscosity provides information about the stability of the composition, the release rate of the drug, bioavailability, and, in the case of injectable drug formulations, even the force required for injection. However, measuring viscosity is a complex task with numerous challenges, especially for non-Newtonian materials, which include most pharmaceutical formulations, such as gels. Selecting the appropriate shear rate is critical. Since viscosity in many systems is highly temperature-dependent, stable temperature control is necessary during the measurement. Using microfluidics technology, it is now possible to perform rheological characterization and conduct fast and accurate measurements. Small sample volumes (even below 500 µL) are required, and viscosity determination can be carried out over a wide range of shear rates. Nevertheless, the pharmaceutical application of viscometers operating on the principle of microfluidics is not yet widespread. In our work, we compare the results of measurements taken with a microfluidic chip-based viscometer on different pharmaceutical forms (gels, solution) with those obtained using a traditional rotational viscometer, evaluating the relative advantages and disadvantages of the different methods. The microfluidics-based method enables time- and sample-efficient viscosity analysis of the examined pharmaceutical forms.

Chitosan/carbomer nanoparticles- laden in situ gel for improved ocular delivery of timolol: in vitro, in vivo, and ex vivo study.

Due to the small capacity of the eye cavity and the rapid drainage of liquid into the nasolacrimal duct, patients must frequently administer the drops. Nanoparticles (NPs) and in situ gel systems have each proven their ability to achieve eye retention independently. In this study, timolol-loaded chitosan-carbomer NPs were prepared using the polyelectrolyte complexation method, and incorporated into a pH-responsive in situ gel system made of carbomer. The rheological behavior of NPs-laden in situ gel was examined at room and physiological conditions. Characteristics such as zeta potential, surface tension, refractive index, mucoadhesive properties, drug release, transcorneal permeability, and intra-ocular pressure (IOP) lowering activity were investigated on NPS and NPs-laden in situ gel formulations. The optimum gained NPs system had an encapsulation efficiency of about 69% with a particle size of 196 nm. The zeta potential of the NP and NPs-laden in situ gel were - 16 and + 11 mV respectively. NPs-laden in situ gel presented enhanced viscosity at physiological pH. All physicochemical properties were acceptable for both formulations. NPs and NPs-laden in situ gel systems proved to sustain drug release. They showed mucoadhesive properties which were greater for NPs-laden in situ gel. IOP reduction by NPs-laden in situ gel was significantly higher and more long-lasting than the timolol solution and NPs. In conclusion, the developed NPs-laden in situ gel is a promising carrier for ocular drug delivery due to the slow release of drug from nanoparticles, its mucoadhesive properties, and high viscosity acquisition in contact with precorneal film, which lead to improved therapeutic efficacy.

An Insight Into Risk Assessment and Reformulation of Drug Products Manufactured Using Benzene Grade Carbomer: A Regulatory Perspective.

Cancer has been an enormous pain point for patients and regulatory bodies across the globe. In Dec. 2023, the US FDA released guidance on benzene-grade carbomer formulations, which triggered pharmaceutical manufacturers to assess risk, test finished products, and reformulate drug products with benzene-grade carbomer. The immediate implementation of the stoppage of finished products with benzene-grade carbomers has threatened pharmaceutical excipients and finished product manufacturers. The gravity of this situation prompted the US Pharmacopeia to extend the deadline for discontinuation from August 1, 2025, to August 1, 2026, allowing manufacturers ample time for reformulation and regulatory compliance.There is an immediate need to understand the guidance and to learn how manufacturers should do the risk assessment and approach reformulation. This review provides an in-depth analysis of the risk assessment and reformulation processes involved in various dosage forms utilizing benzene-grade carbomer, supported by specific case studies.This review offers insights into navigating the USFDA guidelines to ensure formulation safety and compliance, thus enabling pharmaceutical practitioners to uphold the highest standards of patient care and tackle life cycle management challenges.The decision of the USFDA to restrict the usage of high benzene content of carbomer in the formulation is a welcome move. This article has shown a way for researchers to see opportunities in the path and provide best-in-class medicines to patients with a better formulation safety profile.

Engineering Titanium-Hydroxyapatite Nanocomposite Hydrogels for Enhanced Antibacterial and Wound Healing Efficacy.

External factors often lead to predictable damage, such as chemical injuries, burns, incisions, and wounds. Bacterial resistance to antibiotics at wound sites underscores the importance of developing hydrogel composite systems with inorganic nanoparticles possessing antibacterial properties to treat infected wounds and expedite the skin regeneration process. In this study, a promising TiO2-HAp@PF-127@CBM inorganic and organic integrated hydrogel system was designed to address challenges associated with bacterial resistance and wound healing. The synthesized TiO2-hydroxyapatite (HAp) nanocomposites were coated with an FDA-approved PluronicF-127 polymer and combined with a carbomer hydrogel (CBM) to accomplish the final product. The synthesized nanoparticles exhibit enhanced biocompatibility against L929 and HUVECs and cell proliferation effects. To mitigate oxidative stress caused by TiO2-induced reactive oxygen species in dark environments for effective antibacterial effects, HAp promotes cell proliferation, expediting wound skin layer formation. CBM binds to inorganic nanoparticles, facilitating their gradual release and promoting wound healing. The reduced inflammation and enhanced tissue regeneration observed in the TiO2-HAp@PF-127@CBM group suggest a favorable environment for wound repair. These results align with prior findings highlighting the biocompatibility and wound-healing properties of titanium-HAp-based materials. The ability of the TiO2-HAp@PF-127@CBM hydrogel dressing to promote granulation tissue formation and facilitate epidermal regeneration underscores its potential for promoting antibacterial effects and wound healing applications.

Moldable Tissue-Sealant Hydrogels Composed of In Situ Cross-Linkable Polyethylene Glycol via Thiol-Michael Addition and Carbomers.

Moldable tissue-sealant hydrogels were developed herein by combining the yield stress fluidity of a Carbomer and in situ cross-linking of 3-arm PEG-thiol (PEG-SH) and 4-arm PEG-acrylate (PEG-AC). The Carbomer was mixed with each PEG oligomer to form two aqueous precursors: Carbomer/PEG-SH and Carbomer/PEG-AC. The two hydrogel precursors exhibited sufficient yield stress (>100 Pa) to prevent dripping from their placement on the tissue surface. Moreover, these hydrogel precursors exhibited rapid restructuring when the shear strain was repeatedly changed. These rheological properties contribute to the moldability of these hydrogel precursors. After mixing these two precursors, they were converted from yield-stress fluids to chemically cross-linked hydrogels, Carbomer/PEG hydrogel, via thiol-Michael addition. The gelation time was 5.0 and 11.2 min at 37 and 25 °C, respectively. In addition, the Carbomer/PEG hydrogels exhibited higher cellular viability than the pure Carbomer. They also showed stable adhesiveness and burst pressure resistance to various tissues, such as the skin, stomach, colon, and cecum of pigs. The hydrogels showed excellent tissue sealing in a cecum ligation and puncture model in mice and improved the survival rate due to their tissue adhesiveness and biocompatibility. The Carbomer/PEG hydrogel is a potential biocompatible tissue sealant that surgeons can mold. It was revealed that the combination of in situ cross-linkable PEG oligomers and yield stress fluid such as Carbomer is effective for developing the moldable tissue sealant without dripping of its hydrogel precursors.

Carbomer Hydrogels with Microencapsulated α-Tocopherol: Focus on the Biocompatibility of the Microcapsules, Topical Application Attributes, and In Vitro Release Study.

The microencapsulation of α-tocopherol based on the complex coacervation of low-molecular-weight chitosan (LMWC) and sodium lauryl ether sulphate (SLES) without harmful crosslinkers can provide biocompatible carriers that protect it from photodegradation and air oxidation. In this study, the influence of the microcapsule wall composition on carrier performance, compatibility with a high-water-content vehicle for topical application, and release of α-tocopherol were investigated. Although the absence of aldehyde crosslinkers decreased the encapsulation efficiency of α-tocopherol (~70%), the variation in the LMWC/SLES mass ratio (2:1 or 1:1) had no significant effect on the moisture content and microcapsule size. The prepared microcapsule-loaded carbomer hydrogels were soft semisolids with pseudoplastic flow behavior. The integrity of microcapsules embedded in the hydrogel was confirmed by light microscopy. The microcapsules reduced the pH, apparent viscosity, and hysteresis area of the hydrogels, while increasing their spreading ability on a flat inert surface and dispersion rate in artificial sweat. The in vitro release of α-tocopherol from crosslinker-free microcapsule-loaded hydrogels was diffusion-controlled. The release profile was influenced by the LMWC/SLES mass ratio, apparent viscosity, type of synthetic membrane, and acceptor medium composition. Better data quality for the model-independent analysis was achieved when a cellulose nitrate membrane and ethyl alcohol 60% w/w as acceptor medium were used.

Liquiritin Carbomer Gel Cold Paste Promotes Healing of Solar Dermatitis in Mice.

Ultraviolet radiation (UVR) has various effects on human cells and tissues, which can lead to a variety of skin diseases and cause inconvenience to people's lives. Among them, solar dermatitis is one of the important risk factors for malignant melanoma, so prevention and treatment of solar dermatitis is very necessary. Additionally, liquiritin (LQ) has anti-inflammatory effects. In this study, we aimed to evaluate the anti-inflammatory and pro-wound healing effects of liquiritin carbomer gel cold paste (LQ-CG-CP) in vitro and in vivo. The results of MTT experiments showed no cytotoxicity of LQ at concentrations of 40 µg/mL and below and cell damage at UVB irradiation doses above 60 mJ/cm2. Moreover, LQ can promote cell migration. ELISA results also showed that LQ inhibited the elevation of the inflammatory factors tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), and interleukin-6 (IL-6) after UVB irradiation. In the mouse model of solar dermatitis, 2% LQ-CG-CP showed the best therapeutic efficacy for wound healing and relief of itching compared to MEIBAO moist burn moisturizer (MEBO). What is more, the results of skin histopathological examination show that LQ-CG-CP promotes re-epithelialization, shrinks wounds, and promotes collagen production, thus promoting wound healing. Simultaneously, LQ-CG-CP reduced TNF-α, IL-1ß, and IL-6 expression. In addition, LQ-CG-CP was not observed to cause histopathological changes and blood biochemical abnormalities in mice. Overall, LQ-CG-CP has great potential for the treatment of solar dermatitis.

Mechanical Properties of Nano-Crystalline Glass-Carbomer Cements Used in Dentistry.

The main aim of this study was to assess the impact of the environment on the mechanical and tribological properties of glass-carbomer cements used in dentistry. The properties of the Glass Cements Polyalkene (GCP) Glass Fill material, belonging to glass-polyalkene cements, were tested after placing it in various environments: air, distilled water, artificial saliva simulating a neutral environment (pH = 7), and simulating inflammation (pH = 4). The research material included four samples and a two-year reference material. The analysis of volumetric consumption and the assessment of the impact of solubility on the stability of glass-carbomer cements were carried out using tribological measurements and Vickers hardness measurements. In addition, microstructural characterization of the materials was performed using scanning electron microscopy (SEM). It was observed that the lowest wear (0.04%), the most stable microstructure, and the lowest average hardness (21.52 HV 0.1) were exhibited by the material stored in artificial saliva simulating a neutral environment (pH = 7). The least stable microstructure and statistically the highest hardness (77.3 HV 0.1) was observed in the test sample, which was stored in air for two years and then in distilled water. The highest consumption (0.11%) was recorded in the case of cement placed in artificial saliva simulating inflammation (pH = 4). The results obtained in this study indicate specific trends in the influence of the environment in which the tested cement is located, such as air, distilled water, air/distilled water, artificial saliva simulating a neutral environment, and simulating inflammation, on its structure, hardness, and wear.

Highly Absorbent Egg White/Carbomer-940 Hydrofilm as a Potential Diabetic Wound Dressing.

Diabetic foot ulcer (DFU) is the most critical problem in diabetic patients. Managing exudate in this kind of wound presents significant challenges in clinics. Advanced wound dressings serve as the most effective approach to managing DFU. Herein, a highly absorbent hydrofilm is presented through a combination of egg white (EW) and Carbomer-940, benefiting from the bioactivity of the EW component and superabsorption capacity of Carbomer-940. The crystallinity of samples rises due to the presence of Carbomer-940. Regarding the high water absorption capacity of Carbomer-940, the swelling ratio and water-holding capacity of samples are also improved via its incorporation of up to 1005%. In contrast, the transmission of water vapor and in vitro degradation rate decreases as Carbomer-940 powers the crystallinity of hydrofilms. Carbomer-940 incorporation in the EW structure accelerates protein release during the time, while this acceleration is partially compensated by the crystallization effect. The cell viability assay demonstrates no toxicity as well as high human foreskin fibroblast cell proliferation for the hybrid hydrofilm sample, where the cell migration is positively affected in the presence of the bioactive components extracted from the dressing. Taken together, the optimized hybrid hydrofilm could be suggested as a promising wound dressing for managing DFUs.

Effect of biological amniotic membrane soaked in pirfenidone on scar formation after glaucoma filtration surgery in rabbit eyes / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To investigate the application of biological amniotic membrane soaked in pirfenidone(PFD)and to evaluate its anti-scarring effect and toxic side effects on glaucoma model of rabbit eyes.METHODS: The right eyes of 72 healthy New Zealand white rabbits were randomly divided into 0.5%PFD+ biological amniotic membrane group, biological amniotic membrane group, mitomycin C(MMC)group and blank control group after the glaucoma model was established by anterior chamber injection of compound carbomer solution, and 18 rabbits in each group underwent trabeculectomy, in which the 0.5% PFD+ biological amniotic membrane group was placed with 0.5% PFD solution-soaked biological amniotic membrane under the scleral flap, and the biological amniotic membrane group was placed with normal saline-soaked rehydrated biological amniotic membrane under the scleral flap. In the MMC group, a cotton pad soaked in MMC was placed under the scleral flap for 3 min and immediately rinsed with normal saline, while the blank control group received no implant after the scleral flap was made. The intraocular pressure(IOP), filtration blebs, toxic side effects and complications were evaluated, and the histopathological changes in the filtration area were observed by hematoxylin-eosin(HE), Masson staining and immunohistochemical staining.RESULTS: The mean IOP at 14, 21 and 28 d after trabeculectomy were 0.5%PFD+ biological amniotic membrane group<MMC group<biological amniotic membrane group<blank control group(all P<0.05). At 28 d after trabeculectomy, 0.5%PFD+ biological amniotic membrane group had the best effect of anti-inflammatory hyperplasia and inhibition of collagen formation, the highest survival rate of filtration blebs, and the inflammatory reaction was mild.CONCLUSION: Biological amniotic membrane soaked in pirfenidone has more obvious anti-scarring effect on glaucoma model, with less toxic side effects and good safety.

N-acetylcysteine attenuates the incidence of phlebitis induced by carbomer/vinorelbine gel.

Background: The high incidence and severe clinical manifestations of phlebitis pose a complex and urgent clinical challenge. The rapid and simple establishment of animal phlebitis models and the development of preventive strategies are crucial to resolving this problem. Methods: In this study, we established such models by mixing vinorelbine ditartrate (VNR) and carbomer to form a sustained-release gel carrier, and then injected it around the veins rather than inside the vessels. Furthermore, we analyzed the efficacy of the carbomer/VNR gel in inducing phlebitis by monitoring the morphology of the veins using HE staining, immunohistochemical and immunofluorescence staining, and western blotting. Reactive oxygen species (ROS) and lipid peroxidation levels were determined using flow cytometry. Finally, we evaluated the inhibitory effect of N-acetylcysteine (NAC) on VNR-induced phlebitis in rabbits and rats. Results: Our findings suggested that the carbomer/VNR gel rapidly and easily induced phlebitis due to by retention of the gel in situ, wrapping the veins, and the prolonged release of VNR. NAC alleviated the VNR-induced oxidative stress response and expression of inflammatory cytokines by attenuating mitochondrial damage in venous endothelial cells, thereby preventing the occurrence of phlebitis in rabbits and rats. Conclusion: The in situ carbomer/VNR gel provides a rapid and simple method for establishing an animal model to study the pathogenesis of phlebitis. Furthermore, the observed therapeutic effect of NAC highlights its novel and efficacious role in preventing and treating phlebitis.

Edible Gels with Cranberry Extract: Evaluation of Anthocyanin Release Kinetics.

The bioactive compounds found in cranberry fruit are natural antioxidants, and their consumption reduces the risk of diabetes, cardiovascular disease, cancers, and urinary tract infections. Oral gels with cranberry fruit extract are a promising product that can ensure accurate dosage and release of the active compounds and are suitable for people with dysphagia. The aim of this study was to determine the effect of polymeric materials on the dissolution kinetics of cranberry fruit anthocyanins from gel formulations. Gel formulations were prepared using freeze-dried cranberry fruit extract with different gelling excipients: chitosan (G1-G3), sodium carboxymethylcellulose (G4-G6), and sodium carboxymethylcellulose combined with carbomers (G7-G9). The dissolution test showed that the release of anthocyanins from gel formulations G1-G6 and G9 was most intense within the first 10 min, with little change in the anthocyanin content of the acceptor medium afterwards. For the formulations based on carboxymethyl cellulose and carbomers G7 and G8, the amount of anthocyanins released into the acceptor medium gradually increased, which prolonged the release time of the active compounds. The test for the release of anthocyanins from the semi-solid systems through a hydrophilic membrane revealed that within the first hour, the total amount of anthocyanins released from the modeled gel formulations (G1-G9) was within the range of 6.02%-13.50%. The 1% chitosan (G1) gel formulation released the fastest and highest amount of anthocyanins (70% within 6 h). The other formulations showed a slower release of anthocyanins, and after 6 h, the amount of anthocyanins released from formulations G2-G9 was <57%.

Efficacy of Apremilast Gels in Mouse Model of Imiquimod-Induced Psoriasis Skin Inflammation.

Apremilast (APM) is a novel drug for the treatment of psoriasis and psoriatic arthritis. APM is a phosphodiesterase 4 (PDE4) inhibitor, raising intracellular cAMP levels and thereby decreasing the inflammatory response by modulating the expression of TNF-α, IL-17, IL-23, and other inflammatory cytokines. The goal of this study is to develop APM gels as a new pharmaceutical formulation for the treatment of topical psoriasis. APM was solubilized in Transcutol-P and incorporated into Pluronic F127, Sepigel, and carbomer bases at different proportions. All formulations were characterized physiochemically. A biopharmaceutical study (release profile) was performed, and ex vivo permeation was evaluated using a human skin model. A toxicity assay was carried out on the HaCaT cell line. A mouse model of imiquimod-induced psoriasis skin inflammation was carried out to determine its efficacy by histological analysis, RNA extraction, and RT-qPCR assays. APM gel formulations showed good physicochemical characteristics and a sustained release profile. There was no permeation of any gel measured through human skin, indicating a high retained amount of APM on the skin. Cell viability was greater than 80% at most dilution concentrations. APM gels treated the psoriasis mouse model, and it shows a reduction in the proinflammatory cytokines (IL-8, IL-17A, IL-17F, and IL-23). APM gels could be a new approach for the treatment of topical psoriasis.

Multifunctional Drugs-Loaded Carbomol Hydrogel Promotes Diabetic Wound Healing via Antimicrobial and Immunoregulation.

Diabetic wound healing poses a significant clinical dilemma. Bacterial infection and immune dysregulation are the predominant reasons. However, conventional wound dressings with a single treatment approach often limit therapeutic efficacy and continue working with difficulty. These limitations cause high treatment failure for diabetic wounds. In this study, we developed a multiple drug-loaded carbomer hydrogel containing Que/Van/Rif (QVR-CBMG) for the simultaneous treatment of infection and immune dysregulation. Honeycomb-like QVR-CBMG hydrogel exhibits excellent abilities to eliminate bacterial infection and biofilms in vitro. Moreover, QVR-CBMG hydrogel possesses an immunomodulatory capacity via affecting the Sirt3/SOD2 signaling pathway to promote M2 macrophages. Furthermore, QVR-CBMG hydrogel effectively promotes wound healing in diabetic rats through several mechanisms. The multidrug-loaded wound dressing not only eliminates bacterial infection and facilitated angiogenesis but also promotes collagen deposition and remodulates the local immune microenvironment in the areas of wounds. In summary, this synthetic strategy to eliminate infection and regulate immune disorders has potential translational value for the prevention and management of diabetic wounds.

Semi-Solid Dosage Forms Containing Pranoprofen-Loaded NLC as Topical Therapy for Local Inflammation: In Vitro, Ex Vivo and In Vivo Evaluation.

Pranoprofen (PRA)-loaded nanostructured lipid carriers (NLC) have been dispersed into blank gels composed of 1% of Carbomer 940 (PRA-NLC-Car) and 3% of Sepigel® 305 (PRA-NLC-Sep) as a novel strategy to refine the biopharmaceutical profile of PRA, for dermal administration in the treatment of skin inflammation that may be caused by possible skin abrasion. This stratagem intends to improve the joining of PRA with the skin, improving its retention and anti-inflammatory effect. Gels were evaluated for various parameters such as pH, morphology, rheology, and swelling. In vitro drug release research and ex vivo permeation through the skin were carried out on Franz diffusion cells. Additionally, in vivo assays were carried out to evaluate the anti-inflammatory effect, and tolerance studies were performed in humans by evaluating the biomechanical properties. Results showed a rheological profile common of semi-solid pharmaceutical forms for dermal application, with sustained release up to 24 h. In vivo studies using PRA-NLC-Car and PRA-NLC-Sep in Mus musculus mice and hairless rats histologically demonstrated their efficacy in an inflammatory animal model study. No signs of skin irritation or modifications of the skin's biophysical properties were identified and the gels were well tolerated. The results obtained from this investigation concluded that the developed semi-solid formulations represent a fitting drug delivery carrier for PRA's transdermal delivery, enhancing its dermal retention and suggesting that they can be utilized as an interesting and effective topical treatment for local skin inflammation caused by a possible abrasion.

Emulsion-Based Gel Loaded with Ibuprofen and Its Derivatives.

The aim of this study was to evaluate the effect of vehicle and chemical modifications of the structure of active compounds on the skin permeation and accumulation of ibuprofen (IBU). As a result, semi-solid formulations in the form of an emulsion-based gel loaded with ibuprofen and its derivatives, such as sodium ibuprofenate (IBUNa) and L-phenylalanine ethyl ester ibuprofenate ([PheOEt][IBU]), were developed. The properties of the obtained formulations were examined, including density, refractive index, viscosity, and particle size distribution. The parameters of release and permeability through the pig skin of the active substances contained in the obtained semi-solid formulations were determined. The results indicate that an emulsion-based gel enhanced the skin penetration of IBU and its derivatives compared to two commercial preparations in the form of a gel and a cream. The average cumulative mass of IBU after a 24 h permeation test from an emulsion-based gel formulation through human skin was 1.6-4.0 times higher than for the commercial products. Ibuprofen derivatives were evaluated as chemical penetration enhancers. After 24 h of penetration, the cumulative mass was 1086.6 ± 245.8 for IBUNa and 948.6 ± 87.5 µg IBU/cm2 for [PheOEt][IBU], respectively. This study demonstrates the perspective of the transdermal emulsion-based gel vehicle in conjunction with the modification of the drug as a potentially faster drug delivery system.

Clinical comparison of different glass ionomer-based restoratives and a bulk-fill resin composite in Class I cavities: A 48-month randomized split-mouth controlled trial.

OBJECTIVE: The aim of this study is to compare the retention rates (primary outcome) of high-viscosity glass ionomer (GI), glass carbomer (GC), zirconia-reinforced GI (ZIR), and bulk-fill (BF) composite resin restorations. Secondary outcomes included anatomical form, marginal adaptation, marginal discoloration, color match, surface texture, post-operative sensitivity and secondary caries. METHODS: Two calibrated operators placed 128 restorations in 30 patients with a mean age of 21 years. The restorations were evaluated by one examiner at baseline and at 6, 12, 18, 24, and 48 months using the modified US Public Health Service criteria. The data were statistically analyzed using Friedman test. Differences between restorations were analyzed using Kruskal-Wallis test. RESULTS: After 48 months, 23 patients and 97 restorations (23 GI, 25 GC, 24 ZIR, and 25 BF) were evaluated. Patient recall rate was 77%. No significant difference was observed between the retention rates of the restorations (p > 0.05). GC showed significantly lower results than the other three fillings in terms of anatomical form (p < 0.05). There was no significant difference in the anatomical form and retention between GI, ZIR, and BF (p > 0.05). No significant change was observed in the postoperative sensitivity or secondary caries for any of the restorations (p > 0.05). CONCLUSIONS: GC restorations showed statistically lower anatomical form values, indicating lower wear resistance than the other materials. However, no significant difference was observed in the retention rates (as primary outcome) as well as the other secondary outcomes of the four different restorative materials after 48 months. CLINICAL SIGNIFICANCE: GI-based restorative materials and BF composite resin restorations in Class I cavities yielded satisfactory clinical performance after 48 months.

An inventory of adjuvants used for vaccination in horses: the past, the present and the future.

Vaccination is one of the most widely used strategies to protect horses against pathogens. However, available equine vaccines often have limitations, as they do not always provide effective, long-term protection and booster injections are often required. In addition, research efforts are needed to develop effective vaccines against emerging equine pathogens. In this review, we provide an inventory of approved adjuvants for equine vaccines worldwide, and discuss their composition and mode of action when available. A wide range of adjuvants are used in marketed vaccines for horses, the main families being aluminium salts, emulsions, polymers, saponins and ISCOMs. We also present veterinary adjuvants that are already used for vaccination in other species and are currently evaluated in horses to improve equine vaccination and to meet the expected level of protection against pathogens in the equine industry. Finally, we discuss new adjuvants such as liposomes, polylactic acid polymers, inulin, poly-ε-caprolactone nanoparticles and co-polymers that are in development. Our objective is to help professionals in the horse industry understand the composition of marketed equine vaccines in a context of mistrust towards vaccines. Besides, this review provides researchers with a list of adjuvants, either approved or at least evaluated in horses, that could be used either alone or in combination to develop new vaccines.

Effect of Hydrogel Substrate Components on the Stability of Tetracycline Hydrochloride and Swelling Activity against Model Skin Sebum.

Due to its high instability and rapid degradation under adverse conditions, tetracycline hydrochloride (TC) can cause difficulties in the development of an effective but stable formulation for the topical treatment of acne. The aim of the following work was to propose a hydrogel formulation that would ensure the stability of the antibiotic contained in it. Additionally, an important property of the prepared formulations was the activity of the alcoholamines contained in them against the components of the model sebum. This feature may help effectively cleanse the hair follicles in the accumulated sebum layer. A series of formulations with varying proportions of anionic polymer and alcoholamine and containing different polymers have been developed. The stability of tetracycline hydrochloride contained in the hydrogels was evaluated for 28 days by HPLC analysis. Formulations containing a large excess of TRIS alcoholamine led to the rapid degradation of TC from an initial concentration of about 10 µg/mL to about 1 µg/mL after 28 days. At the same time, these formulations showed the highest activity against artificial sebum components. Thanks to appropriately selected proportions of the components, it was possible to develop a formulation that assured the stability of tetracycline for ca. one month, while maintaining formulation activity against the components of model sebum.

[Use of dexpanthenol in corneal damage]. / Primenenie dekspantenola pri povrezhdenii rogovitsy.

Issues of regeneration of the cornea, which is the most vulnerable structure of the eyeball, suffering from various diseases and injuries, burns, when wearing contact lenses and glaucoma, are highly relevant for ophthalmologists. It is also necessary to minimize damage and stimulate corneal epithelization during and after the use of steroidal and non-steroidal anti-inflammatory drugs, antibacterial drugs and antiseptics, which have a cytotoxic effect and often inhibit regeneration processes, potentially even leading to the development of corneal epithelial defects. This review analyzes the effectiveness of a promising drug 5% dexpanthenol in terms of improving the reparative processes and the function of epithelial cells.