Limitations of glycated albumin standardization when applied to the assessment of diabetes patients.

OBJECTIVES: Glycated albumin (GA) has potential value in the management of people with diabetes; however, to draw meaningful conclusions between clinical studies it is important that the GA values are comparable. This study investigates the standardization of the Norudia Glycated Albumin and Lucica Glycated Albumin-L methods. METHODS: The manufacturer reported imprecision was verified by performing CLSI-EP15-A3 protocol using manufacturer produced controls. The Japanese Clinical Chemistry Reference Material (JCCRM)611-1 was measured 20 times to evaluate the accuracy of both methods. GA was also measured in 1,167 patient samples and results were compared between the methods in mmol/mol and %. RESULTS: Maximum CV for Lucica was ≤0.6 % and for Norudia ≤1.8 % for control material. Results in mmol/mol and % of the JCCRM611-1 were within the uncertainty of the assigned values for both methods. In patient samples the relative difference in mmol/mol between the two methods ranged from -10.4 % at a GA value of 183 mmol/mol to +8.7 % at a GA value of 538 mmol/mol. However, the relative difference expressed in percentage units ranged from of 0 % at a GA value of 9.9 % to +1.7 % at a GA value of 30 %. CONCLUSIONS: The results in mmol/mol between the two methods for the patient samples were significantly different compared to the results in %. It is not clear why patient samples behave differently compared to JCCRM611-1 material. Valuable lessons can be learnt from comparing the standardization process of GA with that of HbA1c.

Stepping-up accurate quantification of chlorinated paraffins: Successful certification of the first matrix reference material.

BACKGROUND: Chlorinated paraffins (CPs) are industrial chemicals categorised as persistent organic pollutants because of their toxicity, persistency and tendency to long-range transport, bioaccumulation and biomagnification. Despite having been the subject of environmental attention for decades, analytical methods for CPs still struggle reaching a sufficient degree of accuracy. Among the issues negatively impacting the quantification of CPs, the unavailability of well-characterised standards, both as pure substances and as matrix (certified) reference materials (CRMs), has played a major role. The focus of this study was to provide a matrix CRM as quality control tool to improve the comparability of CPs measurement results. RESULTS: We present the process of certification of ERM®-CE100, the first fish reference material assigned with certified values for the mass fraction of short-chain and medium-chain chlorinated paraffins (SCCPs and MCCPs, respectively). The certification was performed in accordance with ISO 17034:2016 and ISO Guide 35:2017, with the value assignment step carried out via an intercomparison of laboratories of demonstrated competence in CPs analysis and applying procedures based on different analytical principles. After confirmation of the homogeneity and stability of the CRM, two certified values were assigned for SCCPs, depending on the calibrants used: 31 ± 9 µg kg-1 and 23 ± 7 µg kg-1. The MCCPs certified value was established as 44 ± 17 µg kg-1. All assigned values are relative to wet weight in the CRM that was produced as a fish paste to enhance similarity to routine biota samples. SIGNIFICANCE AND NOVELTY: The fish tissue ERM-CE100 is the first matrix CRM commercially available for the analysis of CPs, enabling analytical laboratories to improve the accuracy and the metrological traceability of their measurements. The certified CPs values are based on results obtained by both gas and liquid chromatography coupled with various mass spectrometric techniques, offering thus a broad validity to laboratories employing different analytical methods and equipment.

Development of 3ß,4α-dihydroxy-5α-androstan-17-one standard solution for doping analyses.

Doping analyses are essential for sporting events because some athletes might use prohibited substances to win games. To obtain reliable results from doping analyses, it is important to use both reliable standard solutions and validated analytical methods at accredited laboratories. Among the focused compounds related to prohibited substances listed by the World Anti-Doping Agency, we developed a certified reference material (CRM) for 3ß,4α-dihydroxy-5α-androstan-17-one (DHAS), a metabolite of formestane that is used to conceal prohibited anabolic steroids, in methanol solution (NMIJ CRM 6212-a). To develop a CRM traceable to the International System of Units (SI), we newly applied different analytical methods with an SI-traceable internal standard for quantitative NMR (qNMR) instead of mass balance approach because this CRM solution was required to develop rapidly using a limited amount of high-purity DHAS. One method was gravimetric blending using the purity of DHAS powder evaluated by both qNMR and a combination of qNMR and high-performance liquid chromatography (HPLC), and the other was direct quantification of the DHAS mass fraction in the candidate solution CRM by both qNMR and qNMR/HPLC. Because the values obtained by gravimetric blending and direct quantification of the mass fraction were comparable, the arithmetic mean was applied to obtain the certified value. Considering homogeneity and stability according to ISO Guide 35: 2017, the certified values with expanded uncertainties (coverage factor k = 2, approximate 95% confidence interval) were (135.2 ± 9.5) µg/g for the mass fraction and (107.0 ± 7.5) µg/ml for the mass concentration.

Development of a corn flour certified reference material for the accurate determination of zearalenone.

A certified reference material (CRM, KRISS 108-01-002) for zearalenone in corn flour was developed to assure reliable and accurate measurements in testing laboratories. Commercially available corn flour underwent freeze-drying, pulverization, sieving, and homogenization. The final product was packed in amber bottles, approximately 14 g per unit, and preserved at -70 °C. 13C18-Zearalenone was used as an internal standard (IS) for the certification of zearalenone by isotope-dilution liquid chromatography-tandem mass spectrometry (ID-LC‒MS/MS) and for the analysis of α-zearalenol, ß-zearalenol, and zearalanone by LC‒MS/MS. The prepared CRM was sufficiently homogeneous, as the among-unit relative standard deviation for each mycotoxin ranged from 2.2 to 5.7 %. Additionally, the stability of the mycotoxins in the CRM was evaluated under different temperature conditions and scheduled test periods, including storage at -70°C, -20°C, and 4°C and room temperature for up to 12 months, 6 months, and 1 month, respectively. The content of each target mycotoxin in the CRM remained stable throughout the monitoring period at each temperature. Zearalenone content (153.6 ± 8.0 µg/kg) was assigned as the certified value. Meanwhile, the contents of α-zearalenol (1.30 ± 0.17 µg/kg), ß-zearalenol (4.75 ± 0.33 µg/kg), and zearalanone (2.09 ± 0.16 µg/kg) were provided as informative values.

Batch-to-batch reproducibility for the primary pH method for the example of NMIJ carbonate buffer solutions.

At present, the National Metrology Institute of Japan provides six national primary pH buffers under the Japan Calibration Service System. Each batch of these buffers is certified by the primary pH method using a Harned cell. On the basis of these primary buffers, the designated laboratories supply the secondary and working pH standards using a high-precision pH meter. This paper provides an estimate of the batch-to-batch reproducibility of the primary pH standard production based on the history of the certification of primary carbonate buffers in NMIJ. This buffer, which was chosen as the subject of the study because of the relative difficulty of its measurements (and thus a greater dispersion of results), is nominally the 0.025 mol kg-1 equimolal solution of disodium carbonate and sodium hydrogen carbonate. As its pH value is significantly affected by the purity of the reagents used, the evaluation of their source materials is made by both pH measurements and acidimetric gravimetric back titrations. Considering the experimentally determined pH reproducibility of ca. 0.010, potential risks to the pH accuracy are discussed when using recipe-based carbonate pH standards.

Assessment of the long-term stability of pesticide residues under freezing conditions in brown rice and soybean certified reference materials.

The objective of this study was to assess the long-term stability of pesticide residues in brown rice and soybean. The long-term stability of pesticide residues in brown rice and soybean was assessed for 5415 days (over 14 years) and 1801 days (about 5 years), respectively. The samples-certified reference materials (CRMs) 7504-a (brown rice) and 7509-a (soybean) -were prepared by freeze-pulverization. Two target pesticides (etofenprox and fenitrothion) were selected for brown rice and four (chlorpyrifos, diazinon, fenitrothion, and permethrin) for soybean. Our analytical results for long-term stability based on highly reliable isotope dilution mass spectrometry were in the range of expanded uncertainty (k=2) for the certified values of each CRM. The concentration showed a decreasing trend in none of the target pesticides when the samples were stored at temperatures between -20 °C and -30 °C, which indicated that the target pesticides were stable for the tested long terms.

The Development of a Series of Genomic DNA Reference Materials with Specific Copy Number Ratios for The Detection of Genetically Modified Maize DBN9936.

The genetically modified (GM) maize DBN9936 with a biosafety certificate will soon undergo commercial application. To monitor the safety of DBN9936 maize, three genomic DNA (gDNA) reference materials (RMs) (DBN9936a, DBN9936b, and DBN9936c) were prepared with nominal copy number ratios of 100%, 3%, and 1% for the DBN9936 event, respectively. DBN9936a was prepared from the leaf tissue gDNA of DBN9936 homozygotes, while DBN9936b and DBN9936c were prepared by the quantitative mixing of gDNA from the leaf tissues of DBN9936 homozygotes and non-GM counterparts. Validated DBN9936/zSSIIb duplex droplet digital PCR was demonstrated to be an accurate reference method for conducting homogeneity study, stability study, and collaborative characterization. The minimum intake for one measurement was determined to be 2 µL, and the gDNA RMs were stable during transport at 37 °C for 14 days and storage at -20 °C for 18 months. Each gDNA RM was certified for three property values: DBN9936 event copy number concentration, zSSIIb reference gene copy number concentration, and DBN9936/zSSIIb copy number ratio. The measurement uncertainty of the certified values took the uncertainty components related to possible inhomogeneity, instability, and characterization into account. This batch of gDNA RMs can be used for calibration and quality control when quantifying DBN9936 events.

Development of Pure Certified Reference Material of Cannabidiol.

Cannabidiol (CBD) is the major functional component in hemp and has a broad range of pharmacological applications, such as analgesic, anti-epileptic, anti-anxiety, etc. Currently, CBD is widely used in pharmaceuticals, cosmetics, and food. To ensure the quality and safety of the products containing CBD, more and more related sample testing is being conducted, and the demand for CBD-certified reference material (CRM) has also sharply increased. However, there is currently a lack of relevant reference materials. In this paper, a simple method for preparing CBD CRM was established based on preparative liquid chromatography using crude hemp extract as a raw material. A qualitative analysis of CBD was performed using techniques such as ultraviolet absorption spectroscopy (UV), infrared spectroscopy (IR), mass spectrometry (MS), nuclear magnetic resonance spectroscopy (NMR), and differential scanning calorimetry (DSC). High-performance liquid chromatography (HPLC) was used for the homogeneity and stability tests, and the data were analyzed using an F-test and a T-test, respectively. Then, eight qualified laboratories were chosen for the determination of a certified value using HPLC. The results show that the CBD CRM had excellent homogeneity and good stability for 18 months. The certified value was 99.57%, with an expanded uncertainty of 0.24% (p = 0.95, k = 2). The developed CBD CRM can be used for the detection and quality control of cannabidiol products.

[Quantitative 31P-NMR for Purity Determination of Organophosphorus Compounds (Pharmaceuticals)].

Quantitative NMR (qNMR), particularly 1H-qNMR, is useful for determining the absolute purity of organic molecules. However, identifying the target signal(s) for quantification is difficult, because of the overlap and complexity of organic molecules. Therefore, we focused on the 31P nucleus, owing to the simplicity of its signals, and investigated the 31P-qNMR absolute determination method by using organophosphorus drugs, water-soluble cyclophosphamide hydrate (CP), and water-insoluble sofosbuvir (SOF). The optimized and reproducible 31P-qNMR conditions, such as qNMR sample preparation [i.e., selecting suitable deuterated solvents and a reference standard (RS) for 31P-qNMR], hygroscopicity and solution stability of the analyte and RS, and qNMR measurements-such as acquisition time, relaxation delay time, and spectral width-were examined. The CP purities determined using 31P-qNMR agreed well with those for the established 1H-qNMR method in D2O. In contrast, the SOF purity determined using 31P-qNMR was 1.6% higher than that for 1H-qNMR in the protic solvent CD3OD. Therefore, using a protic solvent, such as CD3OD, was not suitable for 31P-qNMR; the deuterium exchange with the RS for 31P-qNMR (i.e., phosphonoacetic acid) resulted in a small integrated intensity. Consequently, the aprotic solvent DMSO-d6 was employed to determine the SOF purity. The data revealed that the SOF purities determined using 31P-qNMR agreed well with the established 1H-qNMR values, indicating that the absolute quantification of SOF using both 31P-qNMR and 1H-qNMR is possible in DMSO-d6. Thus, we established an optimized and reproducible 31P-qNMR method in validation study across multiple laboratories.

Characteristic Evaluation of Gas Chromatography with Different Detectors for Accurate Determination of Sulfur Hexafluoride.

Sulfur hexafluoride (SF6), which survives in the atmosphere for an extremely long period of time, is the most potent greenhouse gas regulated under the Kyoto Protocol. So, the accurate monitoring of atmospheric SF6 plays an important role in the study of the control policies for reducing greenhouse gas emissions. The instruments for SF6 measurement are typically calibrated using certified reference materials. The concentrations of the commercially available SF6 reference materials usually have a broad range, from 1 µmol/mol to 6000 µmol/mol. Some characteristics including sensitivity, linear range, relative standard deviation, and accuracy are crucial for the determination of SF6 in such a broad concentration range. Therefore, the selection of a proper detector for the accurate determination of SF6 with such a broad range is extremely important to establish a gas chromatography (GC) method for developing SF6 reference materials. In this paper, several typical GC methods with different detectors, including a thermal conductivity detector (TCD), a pulsed discharge helium ionization detector (PDHID), and a flame photometric detector (FPD), were carefully established for the accurate determination of SF6 with different concentrations. The results show that an FPD detector has a relatively narrow linearity range, thus a quadratic equation should be established for building a calibration curve. The PDHID and TCD have good linearity with coefficients of 1.0000 in the concentration range of 10-100 µmol/mol (using a PDHID), and 100-1000 µmol/mol (using a TCD), respectively. Further considering the measurement errors of indication results, the PDHID is suitable for SF6 measurement when the concentrations are below 100 µmol/mol, whereas the TCD is suitable for SF6 measurement when the concentrations are over 100 µmol/mol. These results provide useful guidance in choosing an appropriate GC detector for the accurate determination of SF6, which are especially very helpful for developing SF6 reference materials.

Certification of New Selenium-Enriched Yeast and Supplement Reference Materials for Selenomethionine Using Two Independent Measurement Strategies.

Selenium-enriched yeast possesses the unique ability of transforming chemical selenium, such as sodium selenite, into a biologically active form, which mitigates its toxic effects on the human body. The transformation product of this process, selenomethionine, can be safely and effectively absorbed and utilized by the human body; hence, it has been spiked into a selenium-enriched supplement. This study employs two distinct measurement strategies to determine the selenomethionine content in two candidate reference materials, a selenium-enriched yeast powder and supplement, using both organic and inorganic mass spectrometry. The concentrations of selenomethionine in the selenium-enriched yeast were determined using HPLC-ICP-MS and HPLC- ESI-MS/MS, with mass fractions measured at 718 mg SeMet kg-1 and 715 mg SeMet kg-1, respectively. Notably, both methods yielded consistent results for the selenium supplement, with a selenomethionine mass fraction of 59 mg SeMet kg-1. Ultimately, the certified values of these candidate reference materials were determined as 716 mg kg-1 and 59 mg SeMet kg-1 with expanded uncertainties of 36 mg SeMet kg-1 (k = 2) and 5 mg SeMet kg-1 (k = 2), respectively. The development of these candidate reference materials serves as a valuable reference for diverse methods aiming to determine the value of organic selenium speciation in complex food substrates.

Production and certification of BOTS-1: bovine muscle-certified reference material for incurred veterinary drug residues.

A freeze-dried bovine muscle-certified reference material (CRM), known as BOTS-1 (DOI: https://doi.org/10.4224/crm.2018.bots-1 ), containing incurred residues of commonly used veterinary drugs was produced and certified for the mass fraction of eight veterinary drug residues. Value assignment was carried out using liquid chromatography tandem mass spectrometry (LC-MS/MS) methods in conjunction with isotope dilution and standard addition approaches involving stable isotope internal standards. Data from the National Research Council of Canada (NRC), Canadian Food Inspection Agency (CFIA), United States Department of Agriculture (USDA), and the Federal Office of Consumer Protection and Food Safety in Germany (BVL) were used for value assignment. Results for two drug residues were also obtained through an international inter-laboratory comparison CCQM-K141/P178 organized under the auspices of the International Bureau of Weights and Measures (BIPM). Quantitative NMR (1H-qNMR) was used to characterize primary standards of all veterinary drugs certified. The certified mass fractions of the veterinary drug residues were 490 ± 100 µg/kg for chlorpromazine, 44 ± 4.4 µg/kg for ciprofloxacin, 3.3 ± 1.4 µg/kg for clenbuterol, 9.5 ± 0.8 µg/kg for dexamethasone, 57 ± 4.8 µg/kg for enrofloxacin, 3.0 ± 0.4 µg/kg for meloxicam, 12.4 ± 1.2 µg/kg for ractopamine, and 2290 ± 120 µg/kg for sulfadiazine with expanded uncertainties quoted (95% confidence) which include the effects due to between-bottle inhomogeneity, instability during long-term storage and transportation, and characterization.

Improvement of the quantitativeness of the thermal desorption-GC/MS method and development of polystyrene certified reference material for the quantification of decabromodiphenyl ether (BDE 209) by using isotope dilution mass spectrometry.

A polystyrene (PS) certified reference material (CRM) for the analysis of decabromodiphenyl ether (BDE 209) was issued. PS disk was prepared by injection molding of the mixture of versine PS and BDE 209. The certification of the PS CRM was conducted by two analytical methods with different sample preparation methods using isotope dilution mass spectrometry (IDMS). The certified value, wCRM, was 978 mg/kg, and this value coincided with the regulation value of BDE 209 in the Restriction of Hazardous Substances directive (1000 mg/kg). The uncertainties related to certification, uwmean, inhomogeneity, uhom, and long- and short-term instability, usts and ults, respectively, were evaluated based on the mass fraction of BDE 209. The uwmean, uhom, usts, and ults were 0.0265, 0.0046, 0.0061, and 0.0099 (relative), respectively, and the expanded uncertainty for this CRM was determined as 57 mg/kg (coverage factor is 2). Additionally, the quantitative capability of the thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS) method was evaluated. In TD-GC/MS, the analytical values of the developed CRM obtained by the external and internal standard methods with matrix-free calibrants were out of the range of the wCRM (almost 10% larger or smaller), whereas those with matrix-matched calibrants agreed with the wCRM. In contrast to these results, the analytical values obtained by TD-GC/MS using IDMS were consistent with the wCRM no matter if matrix-free or matrix-matched calibrants were used. These results indicated that, for quantification of BDE 209 in PS, the trueness and precision of TD-GC/MS can be enhanced by applying IDMS without matrix-matched calibrants.

Development of a coffee bean certified reference material (KRISS CRM 108-10-023) for elemental analysis.

The development of a novel coffee bean matrix certified reference material (CRM) for elemental analysis is described. The CRM was prepared by processing green coffee beans into a dry homogeneous powder. Mass fractions of elements in the CRM were measured using double isotope dilution inductively coupled plasma mass spectrometry (double ID-ICP-MS), and measurement results for eight elements (Mg, Ca, Fe, Cu, Zn, Cd, Hg, and Pb) of sufficient quality were certified. The mass fraction range was from 0.09476 mg/kg (Cd) to 1908 mg/kg (Mg), with relative expanded uncertainty range of 0.66% (Cd) to 12% (Pb). Measurement results of two elements (Cr and Ni) with insufficient quality were provided for information only. During characterization, an effective approach for the measurement of isotopic abundances and molar masses of elements with high natural isotopic variations for double ID-ICP-MS was developed and applied. The CRM developed in the present study is expected to be a useful measurement standard for assuring the quality of measurement procedures for coffee beans or related materials.

Quantitative 31P-NMR for the Purity Determination of the Organophosphorus Compound Brigatinib and Its Method Validation.

The spectrum of 31P-NMR is fundamentally simpler than that of 1H-NMR; consequently identifying the target signal(s) for quantitation is simpler using quantitative 31P-NMR (31P-qNMR) than using quantitative 1H-NMR (1H-qNMR), which has been already established as an absolute determination method. We have previously reported a 31P-qNMR method for the absolute determination of cyclophosphamide hydrate and sofosbuvir as water-soluble and water-insoluble organophosphorus compounds, respectively. This study introduces the purity determination of brigatinib (BR), an organophosphorus compound with limited water solubility, using 31P-qNMR at multiple laboratories. Phosphonoacetic acid (PAA) and 1,4-BTMSB-d4 were selected as the reference standards (RSs) for 31P-qNMR and 1H-qNMR, respectively. The qNMR solvents were chosen based on the solubilities of BR and the RSs for qNMR. CD3OH was selected as the solvent for 31P-qNMR measurements to prevent the influence of deuterium exchange caused by the presence of exchangeable intramolecular protons of BR and PAA on the quantitative values, while CD3OD was the solvent of choice for the 1H-qNMR measurements to prevent the influence of water signals and the exchangeable intramolecular protons of BR and PAA. The mean purity of BR determined by 31P-qNMR was 97.94 ± 0.69%, which was in agreement with that determined by 1H-qNMR (97.26 ± 0.71%), thus indicating the feasibility of purity determination of BR by 31P-qNMR. Therefore, the findings of this study may provide an effective method that is simpler than conventional 1H-qNMR for the determination of organophosphorus compounds.

Paving the way for new and challenging matrix reference materials-particle suspensions at the core of material processing providing RMs for method development and method validation.

Sufficient homogeneity of the certified parameter(s) over the whole fill series of a matrix reference material (RM) is a fundamental quality criterion. In practice, the heterogeneity of the target parameter is evaluated, whereby a relative value can be calculated of how much the target parameter is varying over the RM-batch. A high degree of homogeneity (low heterogeneity) is an inherent quality mark of a good RM. Here, we report how challenging matrix RMs were produced by using particle suspensions at the core of the material processing step. The examples of matrix RMs produced span from whole water reference materials for persistent organic pollutants, PM2.5-like atmospheric dust certified for specific ions to microplastic RMs. Most of these RMs were subsequently used in different phases of analytical method development or for method validation. Common to all these matrices is that they cannot be easily mixed, handled, or dosed to prepare larger sample batches. In all cases, a continuously stirred suspension of particles was used during material processing. In general, relative between-bottle heterogeneities from 1.6 to 6% were achieved for the target parameters in these matrix presentations. Concerning developments of new CRMs in emerging fields, the co-dependence between the availability of validated analytical methods with good repeatability and testing materials with a known and high homogeneity of the target parameter(s) becomes particularly challenging. This situation is an RM/Method causality dilemma. To overcome that hurdle, strategies are proposed for stepwise processes where RM producers and a network of analytical method developers could work hand in hand. In addition, development of a portfolio of inexpensive and well-homogenised common samples coupled with a reporting interface is suggested. This would benefit method developers and RM producers alike. As more and more data is compiled for a specific matrix, it paves the way for new and challenging RMs that can later be used by a wider community.

Development of cancer biomarker heat shock protein 90α certified reference material using two different isotope dilution mass spectrometry techniques.

Heat shock protein 90α (HSP90α) has been regarded as an important indicator for judging tumor metastasis and prognosis due to its significant upregulation in various tumors. Therefore, the accurate quantification of HSP90α is of great significance for clinical diagnosis and therapy of cancers. However, the lack of HSP90α certified reference material (CRM) leads to the accuracy and consistency of quantification methods not being effectively evaluated. Besides, quantitative results without traceability make comparisons between different studies difficult. In this study, an HSP90α solution CRM was developed from the recombinant protein raw material. The recombinant protein is a dimer, and the purity of the CRM candidate reached 96.71%. Both amino acid analysis-isotope dilution mass spectrometry (AAA-IDMS) and unique peptide analysis-isotope dilution mass spectrometry (UPA-IDMS) were performed to measure the content of HSP90α in the solution CRM candidate, and the certified value was assessed to be 66.2 ± 8.8 µg/g. Good homogeneity of the CRM was identified, and the stability examination suggested that the CRM was stable for at least 4 months at - 80 °C and for 7 days at 4 °C. With traceability to SI unit (kg), this CRM has potential to help establish a metrological traceability chain for quantification of HSP90α, which will make the quantification results standardized and comparable regardless of the quantitative methods.

Development of a Pure Certified Reference Material of D-Mannitol.

A new certified reference material (CRM) of D-mannitol (GBW(E) 100681) has been developed in this study. We describe the preparation, structure determination, characterization, homogeneity study, stability study, as well as uncertainty estimation. The main component was 99.91% ± 0.01%. The moisture content of the candidate CRM was 0.036% ± 0.002%, as measured by Karl Fischer titration. The nonvolatile and volatile impurities in the candidate CRM were all much less than 0.01%, which was determined by the ICP-MS and headspace GC-FID methods, respectively. The purity of the D-mannitol CRM was 99.9% ± 1.1% (k = 2), as measured by the two independent approaches involving the mass balance method (MB) and quantitative nuclear magnetic resonance technique (qNMR). The D-mannitol CRM was stable during the monitoring period for each temperature. It is stable for up to 48 months at room temperature and 28 days at 50 °C. The uncertainty was evaluated by combining the contributions from characterization, homogeneity, and stability. The developed D-mannitol CRM would effectively support method validation and proficiency testing, as well as effectively guarantee the accuracy, reliability, and comparability of results.

Green synthesis of fluorescent carbon dots from Robinia hispida L. leaves for selective detection of Hg (II).

In this study, Robinia hispida L leaves (RH) was used as a precursor for the first time to synthesize fluorescent carbon dots (CDs) with stable blue fluorescence by a single-step hydrothermal synthesis method. Notably, the innovative approach eliminates the necessity for toxic chemicals or hazardous substances, marking a significant advancement in the field. The synthesized CDs demonstrate CDs demonstrates the predominance of spherical shapes with an average size of 11.63 ± 1.92 nm. The CDs not only exhibit an enhanced fluorescent efficiency with a relatively high quantum yield of up to 6.8%, but they also possess the potential for direct utilization in the selective determination of Hg(II) through fluorescence quenching, even without any functionalization. Under the optimized conditions at a pH of 7.0, a robust linear correlation was found to exist between the fluorescence intensity and the concentration of Hg (II) within the range of 5-17.5µM, exhibiting a detection limit (3σ) of 1.5µM. Additionally, this methodology was effectively employed to successfully detect Hg (II) ions in various aqueous samples, including tap water, spring water, drinking water, and a certified reference material (CRM-SA-C Sandy Soil C). The spike recoveries of 97.6%-101.6% with less than 2.7% variability were performed on all samples.

Developing Amphetamine Certified Reference Materials: From Batch and Continuous-Flow Synthesis to Certification Protocol.

Certified reference materials (CRM) of amphetamine derivatives were produced through a simple, rapid and efficient synthesis in both batch and continuous-flow conditions, accompanied by the development of a comprehensive certification protocol for this class of substances. Our chemistry enabled the synthesis of MDA, MDMA, PMA and PMMA in two steps from safrole and estragole with overall yields of 38-61 % in 48 hours under batch conditions and 61-65 % in 65 minutes under continuous-flow conditions, followed by the development of a certification protocol for these materials through identity checking, homogeneity, stability, and characterization studies. Furthermore, as result of this work, a very pure CRM of MDA.HCl with 99.1±1.4 g/100 g of certified characterization value was produced. Considering the importance of supplying amphetamine calibrants for public security efforts in Forensic Chemistry, the potential therapeutical applications, and responding to the rising demand for the synthesis of CRM, this work presents a pioneering approach for the production of amphetamine and related compounds.