Combined replantation of the posterior arch of the atlas and bilateral axial lamina in the treatment of intradural schwannoma: a case report.

Background: Laminotomy and laminar replantation have emerged as novel treatment modalities for intraspinal tumors, aiming to minimize postoperative complications and retain spinal mobility. However, existing research predominantly emphasizes their application in the thoracolumbar spine. The unique anatomy of the atlantoaxial segments necessitates surgical techniques that differ from those used in other spinal regions, and the clinical effect of such procedure remains unknown. Case presentation: A 61-year-old male patient with intradural schwannoma at the atlantoaxial level was operated on. The patient underwent posterior laminectomy, as well as a combined replantation of the posterior arch of the atlas and bilateral axial laminae. Postoperatively, the patient experienced significant neurological improvement, with no deformities or instability on the radiological assessments during the follow-up. Conclusion: Laminotomy with combined replantation of the posterior arch of the atlas and bilateral axial lamina emerges as an effective approach for managing intraspinal tumors at the atlantoaxial level. This technique not only offers ample operating space but also restores the stability of the spinal canal. Moreover, it preserves the mobility of the atlantoaxial segment, minimizes impact on adjacent segments, and mitigates the formation of postoperative fibrosis.

Two-level Anterior Cervical Corpectomy and Fusion versus Posterior Open-door Laminoplasty for the Treatment of Cervical Ossification of Posterior Longitudinal Ligament: A Comparison of the Clinical Impact on the Occipito-Atlantoaxial Complex.

OBJECTIVE: Both two-level anterior cervical corpectomy and fusion (t-ACCF) and posterior open-door laminoplasty (ODLP) are effective surgical procedures for the treatment of ossification of the posterior longitudinal ligament (OPLL). Previous studies have identified different effects of different surgical procedures on the upper and subaxial cervical spine (UCS, SCS), however, there are no studies on the effects of t-ACCF and ODLP on the occipito-atlantoaxial complex. Therefore, the purpose of this study is to compare the changes in sagittal parameters and range of motion (ROM) of the occipito-atlantoaxial complex in OPLL patients treated with t-ACCF and ODLP. METHODS: This was a retrospective study that included 74 patients who underwent t-ACCF or ODLP for the treatment of OPLL from January 2012 to August 2022 at our institution. Preoperative, 3-month, and 1-year postoperative cervical neutral, flexion-extension, and lateral flexion radiographs were taken. Sagittal parameters including Cobb angle of C2-7, C0-2, C0-1, C1-2, C2 slope, and the ROM were measured. The clinical outcome was assessed using the JOA, VAS, and NDI scores preoperatively and at 3 and 12 months postoperatively. Multiple linear regression was employed to identify factors influencing changes in UCS. RESULTS: In the ODLP group, the SCS (C2-7) Cobb angle was significantly reduced (12.85 ± 10.0 to 7.68 ± 11.27; p < 0.05), and the UCS (C0-2) Cobb angle was significantly compensated for at 1 year postoperatively compared with the t-ACCF group (3.05 ± 4.09 vs 0.79 ± 2.62; p < 0.01). The SCS and lateral flexion ROM of the ODLP group was better maintained than t-ACCF (14.51 ± 6.00 vs 10.72 ± 3.79; 6.87 ± 4.56 vs 3.81 ± 1.67; p < 0.01). The compensatory increase in C0-2, C0-1, and C1-2 ROM was pronounced in both groups, especially in the ODLP group. The results of multiple linear regression showed that only the surgical procedure was a significant factor influencing UCS. CONCLUSION: The loss of the SCS Cobb angle was more pronounced in ODLP relative to t-ACCF, resulting in a significant compensatory increase in UCS and atlantoaxial Cobb angle. The ROM of the UCS, atlantooccipital, and atlantoaxial joints was significantly increased in both groups, this may accelerate degenerative changes in the occipital-atlantoaxial complex, may leading to poorer outcomes in the long-term; of these, ODLP should receive more attention. In contrast, t-ACCF better maintains normal curvature of the SCS and occipito-atlantoaxial complex but loses more ROM.

Atlantooccipital assimilation associated with combined atlas arch defect: a radiological case report.

In this report, atlantooccipital assimilation (AS), anterior arch defect (AAD), and posterior arch defect (PAD) of the atlas, and several variations around the craniocervical junction were identified on computed tomography (CT) of a patient of unknown sex and age. Coronal and sagittal CT scans showed AS and bilateral fusion of the atlas and the base of occipital bone. Axial CT scan at the atlas revealed PAD type B on the left side and midline AAD. Morphometric measurements indicated a potential ventral spinal cord compression. In addition, mid-sagittal CT revealed the presence of fossa navicularis magna and incomplete formation of the transverse foramen on the right side. This study reports an extremely rare AS associated with AAD, PAD, and other variations of the clivus and the atlas. To our knowledge, no similar case has been reported in the literature.

Frecuencia de Ponticulus posticus en Telerradiografías Laterales de Cráneo / Frequency of Ponticulus posticus in Digital Lateral Cephalograms

En el arco posterior del atlas se describe una variación de tejido óseo denominada Ponticulus posticus (PP), la cual se ha relacionado con el desarrollo de dolor cervical. El objetivo de este estudio fue determinar la frecuencia de PP en telerradiografías laterales digitales. Este estudio correspondió a un estudio observacional descriptivo, donde se analizaron 450 telerradiografías laterales digitales obtenidas de la base de datos del Servicio de Imagenología Oral y Maxilofacial de la Facultad de Odontología de la Universidad Andrés Bello, Viña del Mar, Chile. Se analizó la presencia de PP en cada cefalograma, y se utilizó la clasificación de Cederberg y Stubbs para determinar los grados de osificación. Se aplicó la prueba de Chi-cuadrado para establecer una asociación entre la presencia de PP con el sexo y la edad. De las 450 telerradiografías laterales el 42,4 % presenta PP, con una mayor prevalencia entre el rango de 21-40 años. En cuanto al grado de osificación, el grado 2 fue el tipo más prevalente (25 %), seguido del grado 4 (9,5 %), el grado 3 (8 %). No se encontró asociación entre la presencia de PP con edad y género (P > 0,05). La PP es frecuente en la población y se observa a diferentes edades sin predilección por sexo.

SUMMARY: A bony tissue variation called Ponticulus posticus (PP) is described in the posterior arch of the atlas, which has been associated with the development of cervical pain. The aim of this study was to determine the frequency of PP in digital lateral cephalograms. This study was an observational descriptive study, in which 450 digital lateral cephalograms obtained from the database of the Oral and Maxillofacial Imaging Service of the Faculty of Dentistry of the Andrés Bello University, Viña del Mar, Chile, were analyzed. The presence of PP was analyzed in each cephalogram, and the Cederberg and Stubbs classification was used to determine the degrees of ossification. The Chi-square test was applied to establish an association between the presence of PP with gender and age. Of the 450 lateral cephalograms, 42.4 % presented PP, with a higher prevalence in the 21-40 year range. In terms of the degree of ossification, grade 2 was the most prevalent type (25 %), followed by grade 4 (9.5 %), and grade 3 (8 %). No association was found between the presence of PP with age and gender (P > 0.05). PP is common in the population and is observed at different ages without a sex preference.

C2 Superior Facetal Osteotomy: A Novel Technique in Complex Craniovertebral Junction Surgery for C1 Lateral Mass Screw Placement.

Complex craniovertebral junction (CVJ) defects account for a considerable proportion of CVJ diseases. Given the heavily assimilated C1, an unfavorable C1-C2 joint orientation, an overriding C2 superior facet, a low-hanging occiput, and an abnormal vertebral artery course with a high-riding vertebral artery, placement of C1 lateral mass screws might be difficult. To address this, a novel technique for placing C1 lateral mass screws that avoid vertebral artery injury, low-hanging occiput, and overriding C2 superior facet was developed in this study. This approach enables firm fixation of C1-C2 even in difficult situations where the placement of the C1 lateral mass is challenging.

Radiological Study of Atlas Arch Defects with Meta-Analysis and a Proposed New Classification.

This study consists of a retrospective cohort study, a systematic review, and a meta-analysis which were separately conducted. This study aimed to investigate the prevalence of atlas arch defects, generate an evidence-based synthesis, and propose a common classification system for the anterior and combined atlas arch defects. Atlas arch defects are well-corticated gaps in the anterior or posterior arch of the atlas. When both arches are involved, it is known as a combined arch defect. Awareness of these defects is essential for avoiding complications during surgical procedures on the upper spine. The prevalence of arch defects was investigated in an open-access OPC-Radiomics (Radiomic Biomarkers in Oropharyngeal Carcinoma) dataset comprising 606 head and neck computed tomography scans from oropharyngeal cancer patients. A systematic review and meta-analysis were performed to generate prevalence estimates of atlas arch defects and propose a classification system for the anterior and combined atlas arch defects. The posterior arch defect was found in 20 patients (3.3%) out of the 606 patients investigated. The anterior arch defect was not observed in any patient, while a combined arch defect was observed in one patient (0.2%). A meta-analysis of 13,539 participants from 14 studies, including the present study, yielded a pooled-posterior arch defect prevalence of 2.07% (95% confidence interval [CI], 1.22%-2.92%). The prevalences of anterior and combined arch defects were 0.00% (95% CI, 0.00%-0.10%) and 0.14% (95% CI, 0.04%-0.25%), respectively. The anterior and combined arch defects were classified into five subtypes based on their morphology and frequency. The present study showed that atlas arch defects were present in approximately 2% of the general population. For future studies, larger sample sizes should be used for studying arch defects to avoid the small-study effect and to predict the prevalence accurately.

[Posterior cervical pedicle screw rod short-segment internal fixation for the treatment of atlantoaxial fracture and dislocation].

OBJECTIVE: To investigate the clinical efficacy of posterior cervical pedicle screw short-segment internal fixation for the treatment of atlantoaxial fracture and dislocation. METHODS: The clinical data of 60 patients with atlantoaxial vertebral fracture and dislocation underwent surgery between January 2015 and January 2018 were retrospectively analyzed. The patients were divided into study group and control group according to different surgical methods. There were 30 patients in study group, including 13 males and 17 females, with an average age of (39.32±2.85) years old, were underwent short-segment internal fixation with posterior cervical pedicle screws. There were 30 patients in control group, including 12 males and 18 females, with an average age of (39.57±2.90) years old, were underwent posterior lamina clip internal fixation of the atlas. The operation time, intraoperative blood loss, postoperative ambulation time, hospitalization time and complications between two groups were recorded and compared. The pain visual analogue scale(VAS), Japanese Orthopedic Association(JOA) score of neurological function, and fusion status were evaluated between two groups. RESULTS: All patients were followed up for at least 12 months. The study group was better than control group in operation time, intraoperative blood loss, postoperative off-bed activity time, and hospital stay (P=0.000). One case of respiratory tract injury occurred in study group. In control group, 2 cases occurred incision infection, 3 cases occurred respiratory tract injury, and 3 cases occurred adjacent segmental joint degeneration. The incidence of complications in study group was lower than that in control group (χ2=4.705, P=0.030). At 1, 3, 7 days after operation, VAS of study group was lower than that of control group(P=0.000). At 1, 3 months after operation, JOA score of study group was higher than that of control group(P=0.000). At 12 months after operation, all the patients in the study group achieved bony fusion. In control group, there were 3 cases of poor bony fusion and 3 cases of internal fixation fracture, the incidence rate was 20.00%(6/30). The difference between two groups was statistically significant (χ2=4.629, P=0.031). CONCLUSION: Posterior cervical short-segment pedicle screw fixation for atlantoaxial fracture and dislocation has the advantages of less trauma, shorter operation time, fewer complications, and less pain, and can promote the recovery of nerve function as soon as possible.

Biomechanical evaluation of four surgical techniques for ventral stabilization of the atlantoaxial joint in dogs

ABSTRACT Purpose: This study compared, through biomechanical evaluation under ventral flexion load, four surgical techniques for ventral stabilization of the atlantoaxial joint in dogs. Methods: In total, 28 identical atlantoaxial joint models were created by digital printing from computed tomography images of a dog, and the specimens were divided into four groups of seven. In each group, a different technique for ventral stabilization of the atlantoaxial joint was performed: transarticular lag screws, polyaxial screws, multiple screws and bone cement (polymethylmethacrylate-PMMA), and atlantoaxial plate. After the stabilization technique, biomechanical evaluation was performed under ventral flexion load, both with a predefined constant load and with a gradually increasing load until stabilization failure. Results: All specimens, regardless of stabilization technique, were able to support the predefined load without failing. However, the PMMA method provided significant more rigidity (p ≤ 0.05) and also best resisted the gradual increase in load, supporting a significantly higher maximum force (p ≤ 0.05). There was no statistical difference in flexural strength between the transarticular lag screws and plate groups. The polyaxial screws method was significantly less resistant to loading (p ≤ 0.05) than the other groups. Conclusions: The PMMA technique had biomechanical advantages in ventral atlantoaxial stabilization over the other evaluated methods.

A new classification of atlas fracture based on CT reconstruction and its clinical significance / 中华骨科杂志

Objective:To investigate the clinical significance of a new classification system for atlas fractures based on pre- and post-treatment CT features, with a focus on diagnosis and treatment.Methods:A retrospective analysis was conducted on 75 cases of cervical vertebra fractures treated at the Sixth Hospital of Ningbo City between January 2015 and December 2020. The study included 44 males and 31 females, with an average age of 53.3±13.0 years (range: 27-81 years). The fractures were classified according to the Landells classification, resulting in 12 cases of type I, 13 cases of type II, 33 cases of type III, 9 cases that were difficult to classify due to fracture lines located at anatomical junctions, and 8 cases that could not be classified using the Landells classification due to diverse injury mechanisms. To establish a new preliminary classification for cervical vertebra fractures, the researchers considered whether the fracture line in the CT images involved the facet joint surface of the atlas, the impact on bilateral half-rings, and the displacement distance of the fracture ends. Five spinal surgeons were randomly selected to classify the CT images of the 75 patients using the new classification method. After one month, the imaging data of the 75 cases of cervical vertebra fractures were randomized and reclassified to assess the reliability and repeatability of the classification.Results:The new cervical vertebra fracture classification method comprised three types based on whether the fracture line involved the facet joint surface of the atlas: type A (no involvement of the facet joint surface of the atlas), type B (involvement of one side of the facet joint surface with intact contralateral half-ring), and type C (involvement of one side of the facet joint surface with fractured contralateral half-ring). Additionally, based on the maximum displacement distance between the fracture ends (>4 mm), six subtypes were identified: subtype 1 (≤4 mm displacement) and subtype 2 (>4 mm displacement). Consequently, the subtypes were classified as A1, A2, B1, B2, C1, and C2. According to the new classification method, the 75 patients included 17 cases of A1, 12 cases of A2, 7 cases of B1, 13 cases of B2, 12 cases of C1, and 14 cases of C2. The classification demonstrated excellent consistency, as assessed by the five doctors, with Kappa values of 0.85 and 0.91 for reliability and repeatability, respectively. At the final follow-up, all conservatively treated patients achieved bone healing, while four surgically treated patients experienced non-union of the fracture ends but exhibited good fusion between the atlas and axis. The remaining surgically treated patients achieved bony union without complications such as loosening or fracture of internal fixation.Conclusion:The new cervical vertebra fracture classification method, based on CT imaging features, comprehensively covers common clinical cases of cervical vertebra fractures and demonstrates excellent consistency. It provides valuable clinical guidance for the diagnosis and treatment of cervical vertebra fractures.

Diagnosis and treatment of atlantoaxial dislocation / 中华骨科杂志

Atlantoaxial dislocation is a pathological anatomical condition caused by the loss of stability between the atlantoaxial joints, which is a serious disabling disease in spine surgery, and may even endanger the patient's life. The causes of atlantoaxial dislocation include traumatic, congenital, inflammatory, degenerative, tumor, and other factors. Since the symptoms and signs are not specific in clinic, imaging examination is particularly important. Atlantoaxial dislocation is mainly classified according to the etiology, the relative position of atlas and axis, and the difficulty of reduction. Accurate classification is of great significance for the selection of treatment options. There is no popular guideline for surgical indications of atlantoaxial dislocation. Patients presenting with related symptoms or spinal cord dysfunction are generally recognized surgical indications in clinical practice. With the continuous improvement and optimization of atlantoaxial screw placement, reduction and fusion technology, supplemented by new equipment in spine surgery, the surgery-related risks and complications have been greatly reduced, and the surgical treatment of atlantoaxial dislocation can obtain good reduction and fusion results. This tutorial summariz the etiology, diagnosis, classification, treatment, complications, and prognosis of atlantoaxial dislocation, in order to provide a more complete and refined reference for clinical diagnosis and treatment.

Anterior cervical release and posterior fixation for the treatment of irreducible atlantoaxial dislocation with retropharyngeal internal carotid artery / 中华骨科杂志

Objective:To investigate the clinical effect of anterior cervical release and posterior fixation in the treatment of irreducible atlantoaxial dislocation with retropharyngeal internal carotid artery.Methods:Thirteen patients with irreducible atlantoaxial dislocation of retropharyngeal internal carotid artery from January 2015 to July 2019 were treated with anterior cervical release and posterior fixation. There were 8 males and 5 females, aged from 34 to 65 years with an average of 46.1±12.6 years. Positive, lateral and dynamic X-ray films, MR and CTA were performed before operation. There were 4 cases with bilateral retropharyngeal internal carotid artery and 9 cases with unilateral retropharyngeal internal pharyngeal artery. The time of operation, the amount of bleeding and intraoperative and postoperative complications were recorded. The main observations were Japanese Orthopaedic Association (JOA) score, atlantodental interval (ADI), Chamberlain line (CL), and changes in the morphology of the retropharyngeal internal carotid artery and implant fusion.Results:All the operations completed successfully. The operation time was 210-260 min, the average was 245±21 min; the blood loss was 350-600 ml, the average blood loss was 490±107 ml. There was no injury of internal carotid artery, vertebral artery, spinal cord or nerve root during the operation. All patients were followed up for 9 to 24 months, with an average of 15.1±6.2 months. Preoperative JOA score was 6.9±2.3 points, 1 month after operation was 13.5±2.5 points, and the last follow-up was 14.3±2.1 points. The difference was statistically significant ( F=30.91, P<0.001). The difference between 1 month after operation and before operation was statistically significant ( P<0.001), and the improvement rate of JOA score was 75.6%±15.2%. There was no significant difference between the last follow-up and 1 month after operation ( P>0.05). The preoperative ADI was 8.9±2.2 mm, 1 month after operation was 1.1±0.8 mm, and the last follow-up was 1.2±0.9 mm. The difference was statistically significant ( F=114.69, P<0.001). The difference between 1 month after operation and before operation was statistically significant ( P<0.001), and ADI had returned to normal level. There was no significant difference between the last follow-up and 1 month after operation ( P>0.05). The preoperative CL was 11.7±4.8 mm, 1 month after operation was 1.6±2.1 mm, and the last follow-up was 1.8±2.3 mm. The difference was statistically significant ( F=34.19, P<0.001). The difference between 1 month after operation and before operation was statistically significant ( P<0.001), and the position of odontoid process returned to normal level. There was no significant difference between the last follow-up and 1 month after operation ( P>0.05). Bone graft fusion was received at 6 to 12 months after operation, with an average of 10.2 months. Conclusion:CTA examination should be performed before anterior release of atlantoaxial dislocation to understand the position and shape of internal carotid artery. Anterior cervical release combined with posterior bone graft fusion is an effective method for the treatment of irreducible atlantoaxial dislocation with retropharyngeal internal carotid artery without increasing the risk of internal carotid artery injury.

The clinical characteristics and treatment of "sandwich" atlantoaxial dislocation / 中华骨科杂志

Objective:To evaluate the specialty of the clinical features, treatment procedure, clinical outcome, and prognosis in the patients with "sandwich" atlantoaxial dislocation (AAD).Methods:From 2008 to 2018, 160 cases with "sandwich" AAD were retrospectively selected from the case series of AAD in Peking University Third Hospital. The case series had 80 males and 80 females. The mean age at the initial visit was 35.5±14.6 years (range, 5-77). The clinical courses, treatment methodology and prognosis were reviewed. And the surgical approach, posterior fixation segment and the recovery of neurological function were mainly summarized. The atlantodental interval (ADI), the distance by which the odontoid exceeded the Chamberlain line and the cervical-medullary angle were analyzed.Results:The most common symptoms included weakness or numbness of the limbs (67.5%, 108/160), unstable gait (30%, 48/160) and vertigo (20%, 32/160). Among all, 130 cases (81.3%, 130/160) had myelopathy, with the Japanese Orthopaedic Association (JOA) scores from 4 to 16 (mean JOA scores 13.5±2.5). Cranial neuropathy was involved in 20 cases (12.5%). Radiological findings showed brainstem and/or cervical-medullar in 130 cases (81.3%), syringomyelia in 37 cases (23.1%) and Chiari malformation in 30 cases (18.8%). Computed tomography angiography (CTA) was performed in 90 cases, which showed vertebral artery anomalies in 55 cases (61.0%) and excessive medialized internal carotid artery in 5 cases (5.6%). All cases had no spinal cord or vertebral artery injury. The surgery included posterior occipito-cervical fusion (reducible dislocation, 145 cases), and transoral release followed by posterior fusion (irreducible dislocation, 15 cases). Fifty-seven cases were treated using alternative fixation technique. The average follow-up time was 50.5±22.4 months (range, 24 to 120 months). All of 152 cases (95.0%) achieved solid atlantoaxial fusion; there was no obvious osseous fusion formation on postoperative images in 6 cases (3.8%), but no atlantoaxial instability was found on dynamic radiographs; screw loosening happened in 2 patients (1.2%). Nine patients (5.6%) suffered complications, including 4 cases with recurrent dislocation, 2 screw loosening, 2 cases with bulbar paralysis and 1 wound infection. The mean postoperative JOA was 15.1±1.8 (range, 5-17), and the mean neurological improvement rate was 42.9%±33.3% in the patients with myelopathy.Conclusion:"Sandwich" AAD, a subgroup of AAD, has unique clinical features: earlier onset age and more severe myelopathy. The incidence of bone and vascular malformation is higher. So alternative surgical plan and hybrid fixation should be prepared for this subgroup of AAD.

Subclassification and clinical treatment options of refractory atlantoaxial dislocation / 中华骨科杂志

Objective:To subdivide clinical classification of refractory atlantoaxial dislocation, and evaluate the reliability of new subdivide clinical classification of refractory atlantoaxial dislocation.Methods:From January 2010 to December 2018, 48 patients with refractory atlantoaxial dislocation were treated, including 19 males and 29 females, aged 16 to 65 years, with an average of 39.2±13.3 years. According to the changes of relative anatomical position of C 1 and C 2 under general anesthesia with heavy traction of 1/6 body weight, subdivide clinical classification of refractory atlantoaxial dislocation were proposed, and refractory atlantoaxial dislocation was divided into traction loosening type (atlantoaxial angle≥5°) and traction stabilization type (atlantoaxial angle<5°). The traction loosening type was directly reduced by posterior atlantoaxial screw-rod fixation and fusion without anterior or posterior soft tissue release. For traction stabilization type, transoral soft tissue release was performed first, and then transoral anterior reduction plate fixation and fusion or posterior atlantoaxial screw-rod fixation and fusion were performed. Atlantodental interval (ADI) and atlantoaxial angle (AAA) were measured and collected before and after surgery to evaluate atlantoaxial reduction. The space available for the spinal cord (SAC) were measured to evaluate spinal cord compression. Visual analogue score (VAS) was used to evaluate the neck pain levels, and Japanese Orthopaedic Association (JOA) scores was used to evaluate the neurological function. American Spinal Cord Injury Association impairment scale (AIS) was used to evaluate the degree of spinal cord injury. One week, 3, 6, 12 months postoperatively and the annual review of the X-ray and CT scan were checked, in order to evaluate the reduction, internal fixation and bone graft fusion. Results:Among all 48 cases, 22 cases were traction loosening type, of which posterior atlantoaxial screw-rod fixation and fusion were performed in 16 cases and occipitocervical fixation and fusion in 6 cases. 26 cases were traction stabilization type, and they all underwent anterior transoral release, and then, anterior TARP fixation and fusion were performed in 24 cases and posterior screw-rod fixation and fusion in the other 2 cases. X-ray, CT and MRI images and of all patients 1 week after surgery showed good atlantoaxial reduction and decompression of spinal cord. In each of the two types, there was one case lost to follow-up. For 46 cases in follow-up, the follow-up time ranged from 6 to 72 months, with an average of 38.0±17.2 months. Among 46 cases, 21 cases of traction loosening type showed that, ADI reduced from preoperative 9.9±2.2 mm to 2.3±0.9 mm at 3 months after surgery and 2.3±1.0 mm at the last follow-up, AAA increased from preoperative 57.9°±12.3° to 91.0°±2.2° at 3 months after surgery and 90.9°±2.2° at the last follow-up, SAC increased from preoperative 9.8±1.3 mm to 15.1±0.7 mm at 3 months after surgery and 14.9±0.7 mm at the last follow-up, VAS score reduced from preoperative 1.5±2.1 to 0.7±1.0 at 3 months after surgery and 0.3±0.6 at the last follow-up, and JOA score increased from preoperative 10.2±1.7 to 13.3±1.3 at 3 months after surgery and 14.9±1.5 at the last follow-up. Twenty-five cases of traction stabilization type presented that, ADI reduced from preoperative 9.7±2.0 mm to 2.1±1.4 mm at 3 months after surgery and 2.1±1.3 mm at the last follow-up, AAA increased from preoperative 55.8°±9.2° to 90.9°±1.4° at 3 months after surgery and 90.9°±1.3° at the last follow-up, SAC increased from preoperative 10.5±1.0 mm to 15.4±0.5 mm at 3 months after surgery and 14.8±2.8 mm at the last follow-up, VAS score reduced from preoperative 1.7±2.1 to 0.7±0.9 at 3 months after surgery and 0.3±0.5 at the last follow-up, and JOA score increased from preoperative 10.1±1.3 to 12.9±1.5 at 3 months after surgery and 14.4±1.3 at the last follow-up. In the traction loosening type, all the 10 grade D patients were improved to grade E at the last follow-up. In the 2 grade C patients of traction stabilization type before surgery, 1 patient was improved to grade E, 1 patient was improved to grade D, and all 11 patients with grade D were improved to grade E at the last follow-up. Bony fusion was obtained in all patients from 3 to 6 months, with an average of 4.4±1.5 months. During follow-up period, no looseness of internal fixation or redislocation happened.Conclusion:Refractory atlantoaxial dislocation can be divided into traction loosening type and traction stabilization type. For traction loosening type, satisfactory reduction can be achieved by using posterior atlantoaxial screw-rod system without soft tissue release. For traction stabilization type, anterior release is preferable, and then anterior TARP or posterior screw-rod can be used to achieve satisfactory reduction.

Evidence-based guideline for clinical diagnosis and treatment of acute combination fractures of the atlas and axis in adults (version 2023) / 中华创伤杂志

The acute combination fractures of the atlas and axis in adults have a higher rate of neurological injury and early death compared with atlas or axial fractures alone. Currently, the diagnosis and treatment choices of acute combination fractures of the atlas and axis in adults are controversial because of the lack of standards for implementation. Non-operative treatments have a high incidence of bone nonunion and complications, while surgeries may easily lead to the injury of the vertebral artery, spinal cord and nerve root. At present, there are no evidence-based Chinese guidelines for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults. To provide orthopedic surgeons with the most up-to-date and effective information in treating acute combination fractures of the atlas and axis in adults, the Spinal Trauma Group of Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field of spinal trauma to develop the Evidence-based guideline for clinical diagnosis and treatment of acute combination fractures of the atlas and axis in adults ( version 2023) by referring to the "Management of acute combination fractures of the atlas and axis in adults" published by American Association of Neurological Surgeons (AANS)/Congress of Neurological Surgeons (CNS) in 2013 and the relevant Chinese and English literatures. Ten recommendations were made concerning the radiological diagnosis, stability judgment, treatment rules, treatment options and complications based on medical evidence, aiming to provide a reference for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults.

Posterior cervical pedicle screw rod short-segment internal fixation for the treatment of atlantoaxial fracture and dislocation / 中国骨伤

OBJECTIVE@#To investigate the clinical efficacy of posterior cervical pedicle screw short-segment internal fixation for the treatment of atlantoaxial fracture and dislocation.@*METHODS@#The clinical data of 60 patients with atlantoaxial vertebral fracture and dislocation underwent surgery between January 2015 and January 2018 were retrospectively analyzed. The patients were divided into study group and control group according to different surgical methods. There were 30 patients in study group, including 13 males and 17 females, with an average age of (39.32±2.85) years old, were underwent short-segment internal fixation with posterior cervical pedicle screws. There were 30 patients in control group, including 12 males and 18 females, with an average age of (39.57±2.90) years old, were underwent posterior lamina clip internal fixation of the atlas. The operation time, intraoperative blood loss, postoperative ambulation time, hospitalization time and complications between two groups were recorded and compared. The pain visual analogue scale(VAS), Japanese Orthopedic Association(JOA) score of neurological function, and fusion status were evaluated between two groups.@*RESULTS@#All patients were followed up for at least 12 months. The study group was better than control group in operation time, intraoperative blood loss, postoperative off-bed activity time, and hospital stay (P=0.000). One case of respiratory tract injury occurred in study group. In control group, 2 cases occurred incision infection, 3 cases occurred respiratory tract injury, and 3 cases occurred adjacent segmental joint degeneration. The incidence of complications in study group was lower than that in control group (χ2=4.705, P=0.030). At 1, 3, 7 days after operation, VAS of study group was lower than that of control group(P=0.000). At 1, 3 months after operation, JOA score of study group was higher than that of control group(P=0.000). At 12 months after operation, all the patients in the study group achieved bony fusion. In control group, there were 3 cases of poor bony fusion and 3 cases of internal fixation fracture, the incidence rate was 20.00%(6/30). The difference between two groups was statistically significant (χ2=4.629, P=0.031).@*CONCLUSION@#Posterior cervical short-segment pedicle screw fixation for atlantoaxial fracture and dislocation has the advantages of less trauma, shorter operation time, fewer complications, and less pain, and can promote the recovery of nerve function as soon as possible.

Accuracy of Palpation Procedures for Locating the C1 Transverse Process and Masseter Muscle as Confirmed by Computed Tomography Images.

OBJECTIVE: The purpose of this study was to examine the accuracy of palpation methods for locating the transverse processes of the first cervical vertebra and masseter muscle using radiographic images as the gold-standard method and the association between personal characteristics with the observed accuracy. METHODS: This was a single-blinded, diagnostic accuracy study. Ninety-five participants (49 women, 58 ± 16 years of age) were enrolled in this study. A single examiner palpated the neck and face region of all participants to identify the transverse processes of the first cervical vertebra and masseter muscles bilaterally. In sequence, participants underwent a multislice computed tomography scan for assessment of the superimposed inner body structure. Two radiologists assessed the computed tomography images using the same criteria and were blinded regarding each other's assessment and the anatomic landmarks under investigation. The palpation accuracy was calculated as the proportion of the correctly identified landmarks in the studied sample. The correlation of the palpation outcome (correct = 1; incorrect = 0) with age, sex (male = 1; female = 0), and body mass index was investigated using the point-biserial correlation coefficient. RESULTS: The right and left transverse processes were correctly located in 76 (80%) and 81 (85%) participants, respectively, and bilaterally in 157 events (83%), as evaluated by the consensus of the 2 radiologists. The masseter muscles were correctly localized bilaterally in 95 of 95 (100%) participants. Body mass showed statistical evidence of a weak, positive correlation with the correct location of the transverse processes of the first cervical vertebra at the right body side (r = .219; 95% confidence interval, 0.018-0.403; P = .033). CONCLUSION: Palpation methods used in this study accurately identified the location of the first cervical vertebra spinous processes and the masseter muscles.

[Research progress of causes and strategies in revision surgery for atlantoaxial dislocation].

Atlantoaxial dislocation (AAD) is a kind of life-threatening atlantoaxial structural instability and a series of neurological dysfunction caused by common multidisciplinary diseases. The operation risk is extremely high because it is adjacent to the medulla oblongata and the location is deep. With the increase of the number of operations in the upper cervical region, postoperative complications such as failure of internal fixation, non fusion of bone graft and poor prognosis gradually increase.Incomplete primary operation, non fusion of bone graft, infection and congenital malformation are the potential causes. In addition, considering the objective factors such as previous graft, scar formation and anatomical marks changes, revision surgery is further difficult. However, there is currently no standard or single effective revision surgery method. Simple anterior surgery is an ideal choice in theory, but it has high risk and high empirical requirements for the operator;simple posterior surgery has some defects, such as insufficient reduction and decompression;anterior decompression combined with posterior fixation fusion is a more reasonable surgical procedure, but many problems such as posterior structural integrity and multilevel fusion need to be considered.This article reviews the causes and strategies of AAD revision surgery.

Direct Internal Fixation for Unstable Atlas Fractures.

PURPOSE: To investigate the radiologic and clinical outcomes of direct internal fixation for unstable atlas fractures. MATERIALS AND METHODS: This retrospective study included 12 patients with unstable atlas fractures surgically treated using C1 lateral mass screws, rods, and transverse connector constructs. Nine lateral mass fractures with transverse atlantal ligament (TAL) avulsion injury and three 4-part fractures with TAL injury (two avulsion injuries, one TAL substance tear) were treated. Radiologic outcomes included the anterior atlantodental interval (AADI) in flexion and extension cervical spine lateral radiographs at 6 months and 1 year after treatment. CT was also performed to visualize bony healing of the atlas at 6 months and 1 year. Visual Analog Scale (VAS) scores for neck pain, Neck Disability Index (NDI) values, and cervical range of motion (flexion, extension, and rotation) were recorded at 6 months after surgery. RESULTS: The mean postoperative extension and flexion AADIs were 3.79±1.56 (mean±SD) and 3.13±1.01 mm, respectively. Then mean AADI was 3.42±1.34 and 3.33±1.24 mm at 6 months and 1 year after surgery, respectively. At 1 year after surgery, 11 patients showed bony healing of the atlas on CT images. Only one patient underwent revision surgery 8 months after primary surgery due to nonunion and instability findings. The mean VAS score for neck pain was 0.92±0.99, and the mean NDI value was 8.08±5.70. CONCLUSION: C1 motion-preserving direct internal fixation technique results in good reduction and stabilization of unstable atlas fractures. This technique allows for the preservation of craniocervical and atlantoaxial motion.

A case of bow hunter's syndrome and a systematic literature review / 中华骨科杂志

Objective:A clinical case of rotational vertebral artery occlusion (bow hunter's syndrome, BHS) caused by left C 1 osteophyte was reported, and the epidemiological characteristics, diagnosis and treatment methods, and clinical outcomes of BHS were further analyzed. Methods:The clinical data, diagnostic methods, treatment options, and clinical outcomes of the above-mentioned BHS patient are described. The literature from 1978 to 2021 was retrieved, the BHS patients involved were taken as the research objects, and the data of onset age, gender, etiology, site of onset, diagnosis method, treatment method, and clinical outcomes of each selected patient were collected. The data were subdivided through systematic analysis.Results:A patient with rotational compression of the left vertebral artery associated with the left osteophyte of the atlas was presented. 3D-CT showed that the vertebral artery was compressed by the left osteophyte of the atlas. Dynamic digital subtraction angiography (dDSA) showed mild stenosis of the distal V2 segment of the left vertebral artery. When his head turned to the left, the distal V2 segment of the left vertebral artery was compressed and the blood flow was interrupted. After his head was in a neutral position, the blood flow was restored. Because the symptoms could not be relieved after conservative treatment, posterior C 1 osteophyte resection was used to decompress the vertebral artery, and the symptoms disappeared after the operation, and the short-term follow-up results were good. All of the 87 articles and 126 patients have been studied. The median age was 55.0 years (IQR: 43.5, 65.0 years) and the peak age of onset was 51 to 60 years old. The gender difference has been uncovered and the sex ratio was 1.9∶1 (male∶female). Among the 126 patients, 65 patients had vertebral artery occlusion or stenosis located in the C 1-C 2 segment; 66 patients involved the left vertebral artery, 45 patients involved the right vertebral artery, and 15 patients involved bilateral vertebral arteries. DSA was used to confirm BHS in 114 of 126 patients. The follow-up time was 0.25-114 months, with an average of 16.6 months. Thirty-six patients were treated conservatively, and 12 patients had residual symptoms; 33 patients underwent fusion surgery, and all patients' symptoms were relieved after surgery; 54 patients underwent simple decompression surgery, and 4 patients had residual symptoms after surgery; 4 patients received endovascular surgery, and their symptoms were relieved after surgery. Conclusion:Patients with BHS are rare clinically, often involving C 1-C 2 and the left vertebral artery is more likely to be involved. The peak age of onset was 51 to 60 years old. DSA is the gold standard for the diagnosis of BHS. For BHS caused by abnormal bone structure, intervertebral disc herniation, joint instability, etc., decompressive surgery of the vertebral artery or C 1-C 2 segment fusion is the most common treatment modality.

Efficacy comparison of posterior atlas uniaxial and polyaxial screw instrumentation and fusion with bone graft for Gehweiler type IIIb atlas fracture / 中华创伤杂志

Objective:To compare the efficacy of posterior atlas uniaxial and polyaxial screw instrumentation and fusion with bone graft for Gehweiler type IIIb atlas fracture.Methods:A retrospective cohort study was performed to analyze the clinical data of 36 patients with Gehweiler type IIIb atlas fracture admitted to Henan Provincial People′s Hospital from January 2015 to October 2020. There were 29 males and 7 females, with age range of 23-82 years [(48.8±15.5)years]. All patients were treated with posterior atlas screw-rod internal fixation and fusion with bone graft, of which 14 received atlas uniaxial screw internal fixation (uniaxial screw group) and 22 received atlas polyaxial screw internal fixation (polyaxial screw group). The operation time and intraoperative blood loss were compared between the two groups. The atlas fracture union rate and atlantoaxial posterior arch bone fusion rate were compared between the two groups at 3 months and 6 months after operation. The anterior atlantodental interval (ADI), basion-dens interval (BDI) and lateral mass displacement (LMD) were compared between the two groups to evaluate the reduction of fracture fragments before operation, at 1, 3, 6 months after operation and at the last follow-up. At the same time, the visual analogue scale (VAS) and neck dysfunction index (NDI) were compared between the two groups to evaluate neck pain and functional recovery. The postoperative complications were observed.Results:All patients were followed up for 12-44 months [(27.2±9.9)months]. There was no significant difference in operation time or intraoperative blood loss between the two groups (all P>0.05). The atlas fracture union rate and atlantoaxial posterior arch bone fusion rate were 85.7% (12/14) and 78.6% (11/14) in uniaxial screw group at 3 months after operation, insignificantly different from those in polyaxial screw group [72.7% (16/22) and 77.3% (17/22)] (all P>0.05). All patients in the two groups achieved bone union and fusion at 6 months after operation. There was no significant difference in ADI between the two groups before and after operation (all P>0.05). The BDI in the two groups did not differ significantly before operation ( P>0.05), but a significantly higher value was found in uniaxial screw group at 1, 3, and 6 months after operation and at the last follow-up [(5.9±1.3)mm, (5.8±1.3)mm, (5.9±1.2)mm and (5.8±1.2)mm] than in polyaxial screw group [(3.1±0.6)mm, (3.1±0.6)mm, (3.1±0.6)mm and (3.1±0.6)mm] (all P<0.01). The two groups did not differ significantly before operation ( P>0.05), but LMD at 1, 3, and 6 months after operation and at the last follow-up was (1.6±0.8)mm, (1.5±0.8)mm, (1.5±0.7)mm and (1.5±0.9)mm in uniaxial screw group, significantly lower than that in polyaxial screw group [(4.8±1.6)mm, (4.6±1.6)mm, (4.9±1.6)mm and (4.9±1.6)mm] (all P<0.01). There was no significant difference in VAS between the two groups before operation ( P>0.05). The VAS at 1, 3, and 6 months after operation and at the last follow-up was 3.0(3.0, 4.0)points, 2.0(1.0, 2.0)points, 1.0(0.8, 2.0)points and 1.0(0.0, 1.3)points in uniaxial screw group and was 3.5(3.0, 4.0)points, 2.0(2.0, 3.0)points, 2.0(1.0, 2.0)points and 2.0(1.0, 3.0)points in polyaxial screw group. In comparison, the VAS scored much lower in uniaxial screw group than in polyaxial screw group at 6 months after operation and at the last follow-up (all P<0.01). There was no significant difference in NDI between the two groups before operation ( P>0.05). The NDI at 1, 3, and 6 months after operation and at the last follow-up was 34.9±6.3, 23.4±6.2, 13.9±2.7 and 9.4±2.8 in uniaxial screw group and was 33.2±6.1, 24.4±6.3, 18.1±4.1 and 12.7±3.2 in polyaxial screw group, showing a significantly lower NDI in uniaxial screw group than in polyaxial screw group at 6 months after operation and at the last follow-up (all P<0.01). The complication rate was 21.4% (3/14) in uniaxial screw group when compared to 22.7% (5/22) in polyaxial screw group ( P>0.05). Conclusion:For Gehweiler type IIIb atlas fracture, both techniques can attain atlas fracture union and atlantoaxial posterior arch bone fusion, but the posterior atlas uniaxial screw instrumentation and fusion is superior in reduction of atlas fracture displacement and lateral mass separation, neck pain relief and functional improvement.