Color variations in PMMA acrylic resins after thermocycling and mouthwash simulation / Variações de cor em resinas acrílicas de PMMA após termociclagem e simulação de enxaguatório bucal

Estabilidade de cor é um requisito estético fundamental das resinas acrílicas provisórias, em especial quando esses materiais são submetidos a longos períodos na cavidade oral. Embora resinas acrílicas temporárias novas e aprimoradas estejam disponíveis, os efeitos da variação térmica e de soluções antissépticas na estabilidade de cor de resinas acrílicas provisórias ainda não foram completamente elucidados. Portanto, este estudo avaliou a coloração de resinas autopolimerizáveis polimetilmetacrilato (PMMA) e bis-acrilo submetidas à termociclagem e imersão em clorexidina. Amostras padronizadas (n=10) foram preparadas de duas resinas acrílicas temporárias a base de PMMA (Alike® e Duralay®). Foram realizadas três avaliações de cor (T1 ­ 24h após o preparo da amostra, T2 ­ após termociclagem e T3 ­ após termociclagem e imersão em clorexidina) por meio de espectrofotômetro eletrônico de seleção de sombra (Vita Easy Shade). Os dados obtidos foram analisados por ANOVA e teste t (α=0,05). As resinas de PMMA Alike e Duralay apresentaram alteração de cor após a termociclagem e também após a imersão em clorexidina.

Color stability is a fundamental aesthetic requirement for temporary acrylic resins, especially when these materials are subjected to long periods in the oral cavity. Although new and improved temporary acrylic resins are available, the effects of thermal variation and antiseptic solutions on the color stability of temporary acrylic resins have not yet been fully elucidated. Therefore, this study evaluated the color of self-polymerizing resins polymethyl methacrylate (PMMA) and bis-acryl subjected to thermocycling and immersion in chlorhexidine. Standardized samples (n=10) were prepared from two PMMA-based temporary acrylic resins (Alike® and Duralay®). Three color evaluations were carried out (T1 ­ 24h after sample preparation, T2 ­ after thermocycling and T3 ­ after thermocycling and immersion in chlorhexidine) using an electronic shade selection spectrophotometer (Vita Easy Shade). The data obtained were analyzed by ANOVA and t test (α=0.05). PMMA Alike and Duralay resins showed color changes after thermocycling and also after immersion in chlorhexidine.

Microbiological and physicochemical evaluation of chicken cuts submitted to peracetic acid application during the slaughter.

Large-scale poultry slaughter is a highly automated process, which makes cross-contamination possible during the process due to failures in the cleaning and maintenance of automatic equipment, line speed, among other control parameters. To this end, using organic acids to decontaminate poultry meat is a unique strategy for reducing foodborne illnesses. Given the above, this work investigated the application of peracetic acid (PAA) in chicken breast and thigh cuts, to (a) evaluate the effectiveness of PAA as an antimicrobial against Enterobacteriaceae and aerobic mesophilic count (b) evaluate the impact of PAA on the color, texture and cooking loss of skinless chicken breast and chicken thighs with skin. Through the Central Composite Rotational Design (CCRD) with 11 trials and 3 replicates of the central point, the best conditions variable's concentration and time of application of PAA in the cuts were determined. In cuts treated with 1500 PAA solution, a reduction of 2.90 for Enterobacteriaceae in chicken breast was possible with conditions in the central point region and a reduction of 3.65 for Enterobacteriaceae in chicken thigh, when concentrations above 1800 ppm were applied. Peracetic acid (PAA) did not influence the physicochemical characteristics of chicken meat, since it did not change the appearance of fresh meat evaluated by objective analyses (color, texture, and cooking loss), which could impact consumer preference and acceptability.

Assessment of Surface Roughness, Color, and Bonding Efficacy: Self-Adhesive vs. Conventional Flowable Resin.

This in vitro study aimed to analyze the surface roughness (Ra) and color stability (ΔEab, ΔE00) following simulated mechanical brushing and to evaluate the microtensile (µTBS) of self-adhering resin flowable (SARF) to dentin. The selected materials were Constic, Yflow AS, and Tetric N flow (TNF/control). Thirty composite resin cylinders were fabricated for surface property evaluation. Ra and color were assessed both before and after simulated brushing. The thresholds of 50:50% perceptibility and acceptability of color differences in the evaluated resins were assessed. For µTBS analysis, fifteen molars were selected, sectioned to expose flat dentin surfaces, and restored according to the manufacturers' instructions for microtensile testing. There were statistically significant differences in Ra among the groups, with Constic exhibiting the highest Ra value (0.702 µm; p < 0.05), whereas Yflow AS presented the lowest Ra value (0.184 µm). No statistically significant difference in color was observed among the groups (p > 0.05). The 50:50% perceptibility and acceptability thresholds were set at 1.2 and 2.7 for ΔEab and 0.8 and 1.8 for ΔE 00. All the results fell within the acceptable limits. The mean µTBS values of Constic, Yflow AS, and TNF were 10.649 MPa, 8.170 MPa, and 33.669 MPa, respectively. This study revealed increased Ra and comparable color stability among all the tested composite resins after abrasion. However, the SARF exhibited lower µTBS compared to conventional using an adhesive system.

Physicochemical properties of starch of four varieties of native potatoes.

The limited industrial use of indigenous varieties of native potatoes has caused a decrease in its cultivation, restricting it to the self-consumption of the Andean population. The present study analyzed the physicochemical, thermal, and structural properties of the starches extracted from four of these varieties Aq'hu Pukucho, Yurakk Kkachun Wakkachi, Yurac Anca, and Huarmi Mallco, as a potential source of be used in industries such as food, pharmaceutical and, bioplastics. The percentage yield in wet extraction ranged between 14.53 and 20.26 %. The luminosity L* and whiteness index (WI) values were observed in ranges of 90.75-92.71 and 90.05-91.50, respectively. The Finding revealed various techno-functional properties, since the level of amylose varied between 36.29 and 43.97 %, an average zeta potential of -22 mV, and a maximum viscosity between 19,450-14,583 cP. The starches showed consistent thermal behavior since the TGA curves showed three stages with gelatinization temperatures that ranged between 54.9 and 59.75 °C, an enthalpy of 3.60-6.62 J/g, and various shapes of particles such as circular, elliptical, and oval. In conclusion, the relationships between variables such as water absorption index, swelling power, viscosity, crystallinity, enthalpy, and gelatinization temperature reveal different characteristics of each type of starch, which can influence its use.

The Impact of Modeling Liquids on Surface Roughness and Color Properties of Bulkfill Resin Composites After Simulated Tooth Brushing: An in Vitro Study. Part I.

OBJECTIVE: To evaluate the effect of different modeling agents on color changes, surface roughness, and translucency parameters over time in Bulkfill resin composites. MATERIAL AND METHODS: Sixty specimens were prepared using three Bulkfill resin composites (Tetric N-Ceram Bulkfill, Filtek One Bulkfill and Opus Bulkfill) and three modeling agents (Wetting Resin, Optibond FL and Ambar APS). All specimens were subjected to a simulated tooth-brushing (Baseline, 50.000 cycles, 100.000 cycles), and surface roughness was measured at each interval. Surface topography was evaluated. The translucency parameter and color changes were assessed after 24-h, 7-, 14- and 30-day immersion in water, wine, and coffee. Data was analyzed using ANOVA and Bonferroni test. RESULTS: All specimens increased roughness after simulated tooth-brushing (p < 0.05). Wetting Resin decreased roughness on Tetric N-Ceram Bulkfill (p < 0.05). The translucency parameter remained unaltered for all groups. All groups changed color after 30-days of immersion in wine and coffee (p < 0.05). Ambar APS and Wetting Resin on Tetric N-Ceram Bulkfill showed higher color changes when immersed in coffee (p < 0.05). CONCLUSION: The use of modeling agents does not jeopardize translucency properties but may affect surface roughness and color properties of Bulkfill resin composites depending on their composition. CLINICAL SIGNIFICANCE: The findings of this study suggest that surface roughness and color properties are affected by the differences in the composition between modeling agents and Bulkfill resins composites.

Enhancing the Opacity of Glass Ceramics by Applying Opaque Stains to the Intaglio Surface.

OBJECTIVE: The aim of this study was to assess the effect of opaque stain application to the intaglio surface of lithium disilicate glass ceramics on the masking ability of discolored substrates and bond strength to a resin-based luting agent (depending on etching time); the stain film-thickness was also assessed. MATERIALS AND METHODS: Ceramic specimens were produced with CAD-CAM blocks of lithium disilicate (IPS e.max CAD). Two opaque stains were tested at ceramic intaglio surface: opaque glassy stain for titanium frameworks (OP-ti) and low-fusion glassy stain for ceramic characterization (LFG-iv). Non-stained ceramic specimens served as controls. For optical and colorimetric analyses, A2-shaded ceramics of medium and low-translucencies were tested, in thicknesses of 1.0- and 1.5-mm (n = 10), with two coupling agents (non-shaded-glycerin and A2-shaded try-in paste). CIEDE2000 formula was used for calculation of translucency parameter (TP00) and color differences (ΔE00). Whiteness index for dentistry (WID) was also reported. ΔE00 were assessed over discolored substrates (tooth-shaded A2-reference, A4, C3, and C4; coppery metal, silvery metal, white zirconia, and PEEK). Microshear bond strength of stained and non-stained ceramic specimens to a resin-based luting agent was evaluated. Film-thickness of stains was assessed by scanning electron microscopy. RESULTS: The application of opaque stains to the intaglio surface of lithium disilicate ceramics resulted in significant reduction of TP00 (p < 0.001) and WID (p < 0.001) and differences in L*, C*, and ho color coordinates (especially with OP-ti) (p < 0.001). ΔE00 was significantly reduced in stained ceramic groups in comparison with the control, for all discolored substrates (p < 0.001). Acceptable color matching was obtained with stained ceramic specimens for all discolored substrates, depending on the type of stain, ceramic thickness, ceramic translucency, and coupling agent. The application of stains to the ceramic intaglio surface was not detrimental to bond strength to a resin-based luting agent, but depended on the time of hydrofluoric acid-etching (20 s for OP-ti and 60 s for LFG-iv) (p < 0.001). Film-thickness of stains presented mean values <70 µm. CONCLUSION: The application of opaque stains to the intaglio surface of lithium disilicate glass ceramics was effective to mask severely discolored substrates, presenting adequate bond strength to the luting agent and thin film-thicknesses. CLINICAL SIGNIFICANCE: For indirect restorations over severely discolored substrates, the application of opaque stain to the intaglio surface of lithium disilicate glass ceramic ensures acceptable color matching, with adequate bond strength to resin-based luting agents and clinically acceptable stain film-thickness.

Effects of different beverages on the color stability and fluorescence of resin composites: in situ study.

OBJECTIVE: To evaluate the color change (ΔE) and fluorescence (FL) of resin composites after the consumption of beverages. MATERIALS AND METHODS: One hundred and sixty disc-shaped specimens (6 × 2 mm) of Filtek Z350 XT (FZX) and Forma (FOR) resin composites were randomized for use in devices by five volunteers who ingested 100 ml daily of red wine (RW), beer (BE), energy drink (ED) and water (WT) over 15 days. The data were collected from digital photographs and analyzed using the CIE-Lab and RGB scales to obtain ΔE and FL and statistics via two-way ANOVA (for ΔE) and ANOVA for repeated measures (for FL), α = 0.05. RESULTS: The highest ΔE values were obtained for FZX and FOR in the RW (ΔE = 10.5 for FZX and ΔE = 9.90 for FOR) and BE (ΔE = 6.3 for FZX and ΔE = 6.1 for FOR) drinks. For FL, there were different levels of change between the composites, with a much more significant reduction in FL intensity with RW. CONCLUSION: Beverages have the potential to stain the composites evaluated, especially alcoholic beverages. CLINICAL SIGNIFICANCE: Before carrying out an esthetic treatment with resin composites, it is ideal to investigate the types of drinks consumed by patients, for greater predictability of treatment.

A baited trap for kissing bugs (Hemiptera: Reduviidae: Triatominae).

Chagas disease is a key vector-borne disease. This illness is caused by Trypanosoma cruzi Chagas, which is transmitted by triatomine bugs. Largely, the control of this disease relies on reducing such contact. We optimized the performance of a box trap in laboratory conditions to capture four triatomine species: Triatoma pallidipennis (Stål), Triatoma infestans Klug, Triatoma phyllosoma (Burmeister), and Rhodnius prolixus Stål. We varied four components for a box trap: material, color, height, and bait attractants. All species were captured more in corrugated cardboard traps than in other trap material. Moreover, T. infestans and R. prolixus were also captured in plywood traps. T. pallidipennis preferred traps of 15 × 15 × 4 cm and 20 × 20 × 4 cm, while T. phyllosoma and T. infestans were more captured in traps of 10 × 10 × 4 cm, and 15 × 15 × 4 cm. Rhodnius prolixus was more captured to 10 × 10 × 4 cm traps. T. pallidipennis was trapped with traps of any color tested, T. phyllosoma and T. infestans were captured more in red and yellow traps, and R. prolixus was mostly captured in blue, violet, and yellow traps. Triatoma pallidipennis was captured at any height above the ground, while T. phyllosoma, T. infestans, and R. prolixus were mostly captured 50, 100, and 150 cm above the ground. Regarding the lure, T. pallidipennis was trapped with four aldehydes + lactic acid + ammonia; T. infestans and R. prolixus were trapped with a blend of four aldehydes + lactic acid, a blend of the four aldehydes + ammonia, and a blend of four aldehydes + lactic acid + ammonia. Triatoma phyllosoma was trapped with any lure tested. These results showed that the trap boxes offer an alternative method for controlling Chagas disease.

Color Stability of Single-Shade Resin Composites in Direct Restorations: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Ethnic-racial disparities in poisoning cases: analysis of drugs of abuse, medicines and pesticides in Brazil.

In Brazil, ethnic-racial inequalities exist in all fields, obstructing access to goods, services, and opportunities, including healthcare services. However, there are no apparent studies that assess, at a national level, ethnic-racial disparities in poisoning cases, emphasizing skin color as a determining factor. The study aimed to examine the relationship between race/ethnicity and general poisoning cases, by medications, pesticides, and drug of abuse in Brazilian states. Poisoning cases data were extracted for the years 2017, 2018, and 2019. Notification data for general poisoning cases and toxic agents were collected: medications, pesticides, and drugs of abuse. Data were categorized between whites and non-whites (blacks, browns, and indigenous) and without information on skin color/ethnicity. Rates of poisonings amongst ethnic-racial groups and cases of not declared skin color as well as relative risk (RR) of poisoning among non-whites were calculated. All states in the North, Northeast (states with the worst Human Development Index), Midwest, and 2 states in the Southeast exhibited higher rates of poisoning cases per 100,000 inhabitants among non-whites. The RR values for nonwhite individuals were higher in the North and Northeast regions for all types of poisonings. The type of poisoning cases that presented the highest RR for non-whites over the 3 years was drugs of abuse (2-2.44), when compared to other types of poisonings from pesticides (2-2.33) and medications (1.5-1.91). The spatial distribution of poisoning cases rates and RR of nonwhite population support public policies to reduce socioeconomic and environmental inequalities.

A High Andean Hydrocolloid Extracted by Microatomization: Preliminary Optimization in Aqueous Stability.

Aqueous suspensions rely on electrostatic interactions among suspended solids, posing a significant challenge to maintaining stability during storage, particularly in the food and pharmaceutical industries, where synthetic stabilizers are commonly employed. However, there is a growing interest in exploring new materials derived from natural and environmentally friendly sources. This study aimed to optimize the stability parameters of a novel Altoandino Nostoc Sphaericum hydrocolloid (NSH) extracted via micro atomization. Suspensions were prepared by varying the pH, gelatinization temperature and NSH dosage using a 23 factorial arrangement, resulting in eight treatments stored under non-controlled conditions for 20 days. Stability was assessed through turbidity, sedimentation (as sediment transmittance), ζ potential, particle size, color and UV-Vis scanning. Optimization of parameters was conducted using empirical equations, with evaluation based on the correlation coefficient (R2), average relative error (ARE) and X2. The suspensions exhibited high stability throughout the storage period, with optimized control parameters identified at a pH of 4.5, gelatinization temperature of 84.55 °C and NSH dosage of 0.08 g/L. Simulated values included turbidity (99.00%), sedimentation (72.34%), ζ potential (-25.64 mV), particle size (300.00 nm) and color index (-2.00), with simulated results aligning with practical application. These findings suggest the potential use of NSH as a substitute for commercial hydrocolloids, albeit with consideration for color limitations that require further investigation.

The applicability of the urine color scale in pediatric urology.

AIMS: To determine the level of agreement between healthcare professionals, patients and their parents/guardians in the interpretation of the urine color scale (UCS) in cases of urinary dysfunction, analyzing the applicability of the scale as a diagnostic tool determining the hydration status. METHODS: This was a cross-sectional study involving 5-17-year-old patients with lower urinary tract symptoms (LUTS) and enuresis. The study was conducted in a public healthcare referral center for pediatric urology in the Brazilian state of Bahia between October 2019 and March 2020. The Kolmogorov-Smirnov test was used to assess the distribution of the variables. Agreement was assessed using the kappa coefficient and weighted kappa. The z-test was used to determine significant differences between the kappa and weighted kappa. The statistical analysis was conducted using SPSS, version 14, and significance was established at p < 0.05. RESULTS: Forty-four patients were included. The kappa value was 32.4% (p = 0.000) for the agreement between healthcare professionals and patients, 41.9% (p = 0.000) for agreement between healthcare professionals and parents/guardians, and 25.0% (p = 0.001) for agreement between patients and parents/guardians. The weighted kappa was 70.6% (p = 0.000) for agreement between healthcare professionals and patients, 82.4% (p = 0.000) for agreement between healthcare professionals and parents/guardians, and 51.5% (p = 0.001) for agreement between patients and parents/guardians. There was a statistically significant difference in kappa values when the healthcare professionals were compared with the other groups. CONCLUSIONS: Although there were some inconsistencies in interpretation, the UCS proved to be a useful tool with which to evaluate patients' hydration status.

Effect of polishing and bleaching on color, whiteness, and translucency of CAD/CAM monolithic materials.

OBJECTIVE: To evaluate the effect of polishing and bleaching on the recovery of lightness, color, whiteness, and relative translucency parameter (RTP) in CAD/CAM materials and changes in these properties when another staining in coffee was conducted after the treatments. MATERIALS AND METHODS: Disks of Lava Ultimate (LU), Vita Enamic (VE), IPS Empress CAD (EMP), IPS e.max CAD (EMAX), and Vita Suprinity (VS) were (1) not treated (control), (2) polished with Proxyt or (3) Ceramisté, (4) bleached with Opalescence PF or (5) Whiteness HP Blue, and (6) air polished with Clinpro Prophy Powder. CIE L*a*b* color coordinates were registered at baseline (R0), after staining with coffee for 30 min daily for 36.5 days and treatment (R1), and after another staining (R2). Differences (R1-R0 and R2-R0) in lightness (ΔL00), color (ΔE00), RTP (ΔRTP00), and whiteness (ΔWID) were evaluated by mixed repeated measures ANOVA and 95% confidence intervals (α = 0.05) and interpreted in function of their respective 50:50% PT and AT thresholds. Topography was evaluated by scanning electron microscopy (SEM). RESULTS: In LU, Opalescence PF and Proxyt decreased Δ L 00 R 1 - R 0 $$ {\Delta L}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , Δ E 00 R 1 - R 0 $$ {\Delta E}_{00\left({R}_1\hbox{--} {\mathrm{R}}_0\right)} $$ , and ΔWI D R 1 - R 0 $$ {\Delta \mathrm{WI}}_{\mathrm{D}\left({R}_1\hbox{--} {R}_0\right)} $$ and showed lower Δ L 00 R 2 - R 0 $$ {\Delta L}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ , Δ E 00 R 2 - R 0 $$ {\Delta E}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ , and ΔWI D R 2 - R 0 $$ {\Delta \mathrm{WI}}_{\mathrm{D}\left({R}_2\hbox{--} {R}_0\right)} $$ . In VE, all treatments decreased Δ L 00 R 1 - R 0 $$ {\Delta L}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , Δ E 00 R 1 - R 0 $$ {\Delta E}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , and ΔWI D R 1 - R 0 $$ {\Delta \mathrm{WI}}_{\mathrm{D}\left({R}_1\hbox{--} {R}_0\right)} $$ , whereas Δ L 00 R 2 - R 0 $$ {\Delta L}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ , Δ E 00 R 2 - R 0 $$ {\Delta E}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ , and ΔWI D R 2 - R 0 $$ {\Delta \mathrm{WI}}_{\mathrm{D}\left({R}_2\hbox{--} {R}_0\right)} $$ were lower in Opalescence PF than in the control group. In both moments, ΔE00 and ΔWID in EMP (also ΔL00) and EMAX were higher in Opalescence PF than in the control group, from which the other treatments did not differ in R1-R0. In EMP, Δ E 00 R 2 - R 0 $$ {\Delta E}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ in Whiteness HP Blue (also Δ L 00 R 2 - R 0 $$ {\Delta L}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ ) and Proxyt were also higher in comparison to the control group and in VS, Ceramisté decreased Δ L 00 R 1 - R 0 $$ {\Delta L}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , Δ E 00 R 1 - R 0 $$ {\Delta E}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , and Δ R T P 00 R 1 - R 0 $$ \varDelta RT{P}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ , whereas Opalescence PF increased ΔRTP 00 R 1 - R 0 $$ {\Delta \mathrm{RTP}}_{00\left({R}_1\hbox{--} {R}_0\right)} $$ . Δ E 00 R 2 - R 0 $$ {\Delta E}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ of Ceramisté and ΔWI D R 2 - R 0 $$ {\Delta \mathrm{WI}}_{\mathrm{D}\left({R}_2\hbox{--} {R}_0\right)} $$ and Δ R T P 00 R 2 - R 0 $$ \varDelta RT{P}_{00\left({R}_2\hbox{--} {R}_0\right)} $$ of Proxyt were lower than those of the control group. CONCLUSIONS: The most suitable treatment to recover the lightness, color, whiteness, and RTP without changing these properties after another coffee exposure is material-dependent. CLINICAL SIGNIFICANCE: Although the effectiveness of the treatment was material-dependent, Proxyt was the only treatment that promoted clinically acceptable changes for both LU and VE, while for purely ceramic materials, this condition was observed with Ceramisté and Clinpro Prophy Powder.

Colorimetric Evaluation of a Reintegration via Spectral Imaging-Case Study: Nasrid Tiling Panel from the Alhambra of Granada (Spain).

Color reintegration is a restoration treatment that involves applying paint or colored plaster to an object of cultural heritage to facilitate its perception and understanding. This study examines the impact of lighting on the visual appearance of one such restored piece: a tiled skirting panel from the Nasrid period (1238-1492), permanently on display at the Museum of the Alhambra (Spain). Spectral images in the range of 380-1080 nm were obtained using a hyperspectral image scanner. CIELAB and CIEDE2000 color coordinates at each pixel were computed assuming the CIE 1931 standard colorimetric observer and considering ten relevant illuminants proposed by the International Commission on Illumination (CIE): D65 plus nine white LEDs. Four main hues (blue, green, yellow, and black) can be distinguished in the original and reintegrated areas. For each hue, mean color difference from the mean (MCDM), CIEDE2000 average distances, volumes, and overlapping volumes were computed in the CIELAB space by comparing the original and the reintegrated zones. The study reveals noticeable average color differences between the original and reintegrated areas within tiles: 6.0 and 4.7 CIEDE2000 units for the yellow and blue tiles (with MCDM values of 3.7 and 4.5 and 5.8 and 7.2, respectively), and 16.6 and 17.8 CIEDE2000 units for the black and green tiles (with MCDM values of 13.2 and 12.2 and 10.9 and 11.3, respectively). The overlapping volume of CIELAB clouds of points corresponding to the original and reintegrated areas ranges from 35% to 50%, indicating that these areas would be perceived as different by observers with normal color vision for all four tiles. However, average color differences between the original and reintegrated areas changed with the tested illuminants by less than 2.6 CIEDE2000 units. Our current methodology provides useful quantitative results for evaluation of the color appearance of a reintegrated area under different light sources, helping curators and museum professionals to choose optimal lighting.

Case report: "Fur stole and turtleneck" and "halter-back" signs: an expanded wardrobe for dermatomyositis.

A diagnosis of dermatomyositis requires recognition of distinct patterns of skin disease in combination with, and sometimes without, muscle weakness. Often, a striking contrast between involved and uninvolved areas is observed. Familiar patterns include eyelid and midfacial eruptions, Gottron papules/sign, and upper back (shawl sign), central chest (V/open collar sign), and lateral thigh (holster sign) involvement. More recently, new specific antibody/phenotype-associated patterns have been reported. We describe a case series of two distinct patterns of skin involvement in six adult patients with both classical and amyopathic dermatomyositis. Three had paraneoplastic disease. All had intermediate to richly pigmented skin; five were of Afro-Caribbean and one was of Asian-Caribbean descent. Four were men, and two were women. Ages ranged from 41 to 89 years. All patients had concomitant hallmark signs (facial, hand, and/or trunk signs). Three were amyopathic. The first pattern involved a sharply demarcated, horizontally oriented hyperpigmented patch/thin plaque across the shoulders and upper chest, extending up the anterior neck. The second was the combination of the classical upper back shawl distribution with distinct mid-back sparing and diffuse involvement of the lower back. Named patterns help with the recognition of skin rashes in dermatomyositis. Based on the current lexicon describing items of apparel, we liken the first pattern to a "fur stole and turtleneck" sign and the latter to a "halter-back" or "reflected-shawl" sign. Biopsies revealed hyperkeratosis and interface dermatitis, often with epidermal atrophy, compatible with dermatomyositis. These patterns perhaps represent the coalescence of already well-described signs, photo-exacerbation, koebnerization, mechanical stretch, and other currently unclear factors contributing to patterning in dermatomyositis. Pattern distribution recognition is particularly valuable in individuals with richly pigmented skin who may lack typical violaceous erythema. The distinct demarcation led to the initial misdiagnosis of allergic contact dermatitis or other exogenous dermatitis in most of our patients. Further work involves evaluation of antibody phenotype and internal involvement associations. Limitations include lack of specific antibody panels and longitudinal follow-up data.

Prediction of compost organic matter via color sensor.

Composted materials serve as an effective soil nutrient amendment. Organic matter in compost plays an important role in quantifying composted materials overall quality and nutrient content. Measuring organic matter content traditionally takes considerable time, resources, and various laboratory equipment (e.g., oven, muffle furnace, crucibles, precision balance). Much like the quantitative color indices (e.g., sRGB R, sRGB G, sRGB B, CIEL*a* b*) derived from the low-cost NixPro2 color sensor have proven adept at predicting soil organic matter in-situ, the NixPro2 color sensor has the potential to be effective for predicting organic matter in composted materials without the need for traditional laboratory methods. In this study, a total of 200 compost samples (13 different compost types) were measured for organic matter content via traditional loss-on-ignition (LOI) and via the NixPro2 color sensor. The NixPro2 color sensor showed promising results with an LOI-prediction model utilizing the CIEL*a* b* color model through the application of the Generalized Additive Model (GAM) algorithm yielding an excellent prediction accuracy (validation R2 = 0.87, validation RMSE = 4.66 %). Moreover, the PCA scoreplot differentiated the three lowest organic matter compost types from the remaining 10 compost types. These results have valuable practical significance for the compost industry by predicting compost organic matter in real time without the need for laborious, time-consuming methods.

How to train your dragon: absolute conditioning in larval dragonflies.

Insects, despite possessing relatively small brains, exhibit noteworthy adaptive behaviors, making them intriguing subjects for understanding learning mechanisms. This study explores the learning capabilities of dragonfly larvae (Anisoptera: Aeshnidae) in conditioning experiments, shedding light on the cognitive processes that underpin their remarkable abilities. As apex predators, dragonflies play a crucial role in ecosystems, necessitating a diverse range of learning behaviors for survival and reproductive success. We addressed whether dragonfly larvae can differentiate between different colored stimuli and associate color with prey. Our experimental design demonstrated that dragonfly larvae are able to recognize conditioning stimuli. The findings contribute valuable insights into the cognitive abilities of dragonflies, suggesting that these insects can learn and discriminate colors of stimuli. Overall, this research broadens our understanding of insect learning and cognition, contributing to the broader field of animal behavior and memory.