Diagnostic Accuracy of Cone-Beam CT for Acute Intracranial Hemorrhage: A Systematic Review and Meta-analysis.

OBJECTIVE: Our purpose was to synthesize evidence in the literature to determine the diagnostic accuracy of Cone-Beam CT (CBCT) for detection of intracranial hemorrhage (ICH) and hemorrhage types, including intraparenchymal (IPH), subarachnoid (SAH), and intraventricular (IVH). METHODS: We performed a meta-analysis following the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines. Our protocol was registered with International Prospective Register of Systematic Reviews (PROSPERO-CRD42021261915). Systematic searches were last performed on April 30, 2024 in EMBASE, PubMed, Web-of-Science, Scopus, and CINAHL databases. Inclusion criteria were: (1) Studies reporting diagnostic metrics of CBCT for ICH; (2) Studies using a reference standard to determine ICH. Exclusion criteria were: (1) Case reports, abstracts, reviews; (2) Studies without patient-level data. Pooled-estimates and 95% confidence intervals (CI) were calculated for diagnostic Odds ratio (DOR), sensitivity, and specificity using random-effects and common-effects models. Mixed Methods Appraisal Tool was used to evaluate risk-of-bias. RESULTS: Seven studies were included in the meta-analysis yielding 466 patients. Mean/median age ranged from 54-75 years. Females represented 51.4% (222/432) in reported studies. Multidetector-CT was the reference standard in all studies. DOR, pooled-sensitivity, and pooled-specificity for ICH were 5.28 (95%CI:4.11-6.46), 0.88 (95%CI:0.79-0.97), and 0.99 (95%CI:0.98-1.0). Pooled-sensitivity for IPH, SAH, and IVH were 0.98 (95%CI:0.95-1.0), 0.82 (95%CI:0.57-1.0), and 0.78 (95%CI:0.55-1.0). Pooled-specificity for IPH, SAH, and IVH were 0.99 (95%CI:0.98-1.0), 0.99 (95%CI:0.97-1.0), and 1.0 (95%CI:0.98-1.0). DISCUSSION: CBCT had moderate DOR and high pooled-specificity for ICH and hemorrhage types. However, pooled-sensitivity varied by hemorrhage type, with the highest sensitivity for IPH, followed by SAH and IVH.

Feasibility of a Novel Surface-Guided Setup Technique to Reproduce Neck Curvature Using two Regions of Interest.

PURPOSE: To improve the setup reproducibility of neck curvature using real-time optical surface imaging (OSI) guidance on 2 regions of interest (ROIs) to infer cervical spine (c-spine) curvature for surface-guided radiotherapy (SGRT) of head-and-neck (HN) and c-spine cancer. METHODS: A novel SGRT setup approach was designed to reproduce neck curvature with 2 ROIs: upper-chest ROI and open-face ROI. It was hypothesized that the neck curvature could be reproduced if both ROIs were aligned within ±3 mm/2˚ tolerance. This was tested prospectively in 7 volunteers using real-time 3D-OSI guidance and lateral 2D-photography verification after the 3D and 2D references were captured from the initial conventional setup. Real-time SGRT was performed to align chest-ROI and face-ROI, and the longitudinal distance between them was adjustable using a head-support slider. Verification of neck curvature anteriorly and posteriorly was achieved by overlaying edge-extracted lateral pictures. Retrospectively, the relationship between anterior surface and spinal canal alignment was checked in 11 patients using their simulation CT (simCT) and setup cone-beam CT (CBCT). After the anterior surface was rigidly aligned, the spinal canal alignment was checked and quantified using the mean-distance-to-agreement (MDA) and DICE similarity index, and surface-to-spine correlation was calculated. RESULTS: The reproducibility of neck curvatures using the 2xROI SGRT setup is verified and the mean neck-outline-matching difference is within ±2 mm in lateral photographic overlays. The chest-ROI alignment takes 110 ± 58 s and the face-ROI takes 60 ± 35 s. When the anterior body surface is aligned (MDA = 1.1 ± 0.6 mm, DICE = 0.96 ± 0.02,) the internal spinal canal is also aligned (MDA = 1.0 ± 0.3 mm, DICE = 0.84 ± 0.04) in 11 patients. The surface-to-spine correlation is c = 0.90 (MDA) and c = 0.85 (DICE). CONCLUSION: This study demonstrates the feasibility of the novel 2-ROI SGRT setup technique to achieve reproducible neck and c-spine curvature regardless of neck visibility and availability as ROI. Staff training is needed to adopt this unconventional SGRT technique to improve patient setup.

Cone-beam CT with a noncircular (sine-on-sphere) orbit: imaging performance of a clinical system for image-guided interventions.

Purpose: We aim to compare the imaging performance of a cone-beam CT (CBCT) imaging system with noncircular scan protocols (sine-on-sphere) to a conventional circular orbit. Approach: A biplane C-arm system (ARTIS Icono; Siemens Healthineers) capable of circular and noncircular CBCT acquisition was used, with the latter orbit (sine-on-sphere, "Sine Spin") executing a sinusoidal motion with ± 10 deg tilt amplitude over the half-scan orbit. A test phantom was used for the characterization of image uniformity, noise, noise-power spectrum (NPS), spatial resolution [modulation transfer function (MTF) in axial and oblique directions], and cone-beam artifacts. Findings were interpreted using an anthropomorphic head phantom with respect to pertinent tasks in skull base neurosurgery. Results: The noncircular scan protocol exhibited several advantages associated with improved 3D sampling-evident in the NPS as filling of the null cone about the f z spatial frequency axis and reduction of cone-beam artifacts. The region of support at the longitudinal extrema was reduced from 16 to ∼ 12 cm at a radial distance of 6.5 cm. Circular and noncircular orbits exhibited nearly identical image uniformity and quantum noise, demonstrating cupping of - 16.7 % and overall noise of ∼ 27 HU . Although both the radially averaged axial MTF ( f x , y ) and 45 deg oblique MTF ( f x , y , z ) were ∼ 20 % lower for the noncircular orbit compared with the circular orbit at the default full reconstruction field of view (FOV), there was no difference in spatial resolution for the medium reconstruction FOV (smaller voxel size). Differences in the perceptual image quality for the anthropomorphic phantom reinforced the objective, quantitative findings, including reduced beam-hardening and cone-beam artifacts about structures of interest in the skull base. Conclusions: Image quality differences between circular and noncircular CBCT orbits were quantitatively evaluated on a clinical system in the context of neurosurgery. The primary performance advantage for the noncircular orbit was the improved sampling and elimination of cone-beam artifacts.

Semi-automated vertex placement for lattice radiotherapy and dosimetric verification using 3D polymer gel dosimetry.

PURPOSE: To evaluate the feasibility of an open-source, semi-automated, and reproducible vertex placement tool to improve the efficiency of lattice radiotherapy (LRT) planning. We used polymer gel dosimetry with a Cone Beam CT (CBCT) readout to commission this LRT technique. MATERIAL AND METHODS: We generated a volumetric modulated arc therapy (VMAT)-based LRT plan on a 2 L NIPAM polymer gel dosimeter using our Eclipse Acuros version 15.6 AcurosXB beam model, and also recalculated the plan with a pre-clinical Acuros v18.0 dose calculation algorithm with the enhanced leaf modelling (ELM). With the assistance of the MAAS-SFRThelper software, a lattice vertex diameter of 1.5 cm and center-to-center spacing of 3 cm were used to place the spheres in a hexagonal, closed packed structure. The verification plan included four gantry arcs with 15°, 345°, 75°, 105° collimator angles. The spheres were prescribed 20 Gy to 50% of their combined volume. The 6 MV Flattening Filter Free beam energy was used to deliver the verification plan. The dosimetric accuracy of the LRT delivery was evaluated with 1D dose profiles, 2D isodose maps, and a 3D global gamma analysis. RESULTS: Qualitative comparisons between the 1D dose profiles of the Eclipse plan and measured gel showed good consistency at the prescription dose mark. The average diameter measured 13.3 ± 0.2 mm (gel for v15.6), 12.6 mm (v15.6 plan), 13.1 ± 0.2 mm (gel for v18.0), and 12.3 mm (v18.0 plan). 3D gamma analysis showed that all gamma pass percent were > 95% except at 1% and 2% at the 1 mm distance to agreement criteria. CONCLUSION: This study presents a novel application of gel dosimetry in verifying the dosimetric accuracy of LRT, achieving excellent 3D gamma results. The treatment planning was facilitated by publicly available software that automatically placed the vertices for consistency and efficiency.

Efficacy of the CALM® Algorithm in Reducing Motion-Induced Artifacts in CBCT Imaging: A Fractal Dimension Analysis of Trabecular Bone.

OBJECTIVE: The primary goal of this investigation was to ascertain the efficacy of the CALM® motion artifact reduction algorithm in diminishing motion-induced blurriness in Cone Beam Computed Tomography [CBCT] images. The assessment was conducted through Fractal Dimension [FD] analysis of the trabecular bone. METHODS AND MATERIALS: A desiccated human mandible was subjected to Planmeca ProMax 3D® scanning under eight distinct protocols, marked by variations in motion presence [at 5, 10, and 15 degrees] and the deployment of CALM®. In every scan, five distinct regions of interest [ROIs] were designated for FD analysis, meticulously avoiding tooth roots or cortical bone. The FD was computed employing the box-counting method with Image-J 1.53 software. RESULTS: Our findings reveal that a 5-degree motion does not significantly disrupt FD analysis, while a 10-degree motion and beyond exhibit statistical differences and volatility among the sites and groups. A decreased FD value, signifying a less intricate or "rough" bone structure, correlated with amplified motion blurriness. The utilization of CALM® software seemed to counteract this effect in some instances, reconciling FD values to those akin to the control groups. Nonetheless, CALM®'s efficacy differed across sites and motion degrees. Interestingly, at one site, CALM® application in the absence of motion resulted in FD values considerably higher than all other groups. CONCLUSION: The study indicates that motion, particularly at 10 degrees or more, can considerably impact the FD analysis of trabecular bone in CBCT images. In some situations, the CALM® motion artifact reduction algorithm can alleviate this impact, though its effectiveness fluctuates depending on the site and degree of motion. This underscores the necessity of factoring in motion and the employment of artifact reduction algorithms during the interpretation of FD analysis outcomes in CBCT imaging. More research is necessary to refine the application of such algorithms and to comprehend their influence on different sites under varying motion degrees.

Development of a TOPAS Monte Carlo (MC) model extension to simulate the automatic exposure control function of a C-arm CBCT.

PURPOSE: Accurate simulation of organ doses in C-arm CBCT is critical for estimating personalised patient dosimetry. However, system complexities such as automatic exposure control (AEC) and the incorporation of DICOM images into simulations are challenging. The aim of this study was to develop a model for mimicking the operation of an AEC system, which maintains a constant dose to the detector through mA modulation in order to facilitate more accurate MC dosimetry models for C-arm CBCT. METHODS: A Siemens Artis Q Interventional Radiology (IR) C-arm system [Siemens, Erlangen, Germany] was modelled in TOol for PArticle Simulation (TOPAS) by incorporating system specifications such as rotational speed, number of projections and exam protocol parameters. A novel threshold scorer, AECScorer, was developed to model the AEC functionality. MC simulations were performed using a variety of imaged volumes including a CTDI phantom, an anthropomorphic phantom and a patient DICOM dataset. RESULTS: The AECScorer extension provides a framework for a conditional scoring function within TOPAS which allows for the simulation of an AEC system. The AECScorer successfully equalises the dose to the detector for simple phantoms and DICOM imaging datasets by adjusting the number of histories simulated at each CBCT projection. This AECSCorer tool is applicable to other medical imaging systems requiring AEC simulation. CONCLUSIONS: We demonstrate a novel threshold scorer in TOPAS for a C-arm CBCT setup. The presented AECScorer is the first step towards providing a system-, patient- and protocol-specific dose estimates from CBCT dosimetry applications.

Setup errors analysis in iterative kV CBCT: A clinical study of cervical cancer treated with Volumetric Modulated Arc Therapy.

OBJECTIVE: This study aims to analyze setup errors in pelvic Volumetric Modulated Arc Therapy (VMAT) for patients with non-surgical primary cervical cancer, utilizing the onboard iterative kV cone beam CT (iCBCT) imaging system on the Varian Halcyon 2.0 ring gantry structure accelerator to enhance radiotherapy precision. METHOD: We selected 132 cervical cancer patients who underwent VMAT with daily iCBCT imaging guidance. Before each treatment session, a registration method based on the bony structure was employed to acquire iCBCT images with the corresponding planning CT images. Following verification and adjustment of image registration results along the three axes (but not rotational), setup errors in the lateral (X-axis), longitudinal (Y-axis), and vertical (Z-axis) directions were recorded for each patient. Subsequently, we analyzed 3642 iCBCT image setup errors. RESULTS: The mean setup errors for the X, Y, and Z axes were 4.50 ± 3.79 mm, 6.08 ± 6.30 mm, and 1.48 ± 2.23 mm, respectively. Before correction with iCBCT, setup margins based on the Van Herk formula for the X, Y, and Z axes were 6.28, 12.52, and 3.26 mm, respectively. In individuals aged 60 years and older, setup errors in the X and Y axes were significantly larger than those in the younger group (p < 0.05). Additionally, there is no significant linear correlation between setup errors and treatment fraction numbers. CONCLUSION: Data analysis underscores the importance of precise Y-axis setup for cervical cancer patients undergoing VMAT. Radiotherapy centers without daily iCBCT should appropriately extend the planning target volume (PTV) along the Y-axis for cervical cancer patients receiving pelvic VMAT. Elderly patients exhibit significantly larger setup errors compared to younger counterparts. In conclusion, iCBCT-guided radiotherapy is recommended for cervical cancer patients undergoing VMAT to improve setup precision.

Deep learning segmentation of mandible with lower dentition from cone beam CT.

OBJECTIVES: This study aimed to train a 3D U-Net convolutional neural network (CNN) for mandible and lower dentition segmentation from cone-beam computed tomography (CBCT) scans. METHODS: In an ambispective cross-sectional design, CBCT scans from two hospitals (2009-2019 and 2021-2022) constituted an internal dataset and external validation set, respectively. Manual segmentation informed CNN training, and evaluations employed Dice similarity coefficient (DSC) for volumetric accuracy. A blinded oral maxillofacial surgeon performed qualitative grading of CBCT scans and object meshes. Statistical analyses included independent t-tests and ANOVA tests to compare DSC across patient subgroups of gender, race, body mass index (BMI), test dataset used, age, and degree of metal artifact. Tests were powered for a minimum detectable difference in DSC of 0.025, with alpha of 0.05 and power level of 0.8. RESULTS: 648 CBCT scans from 490 patients were included in the study. The CNN achieved high accuracy (average DSC: 0.945 internal, 0.940 external). No DSC differences were observed between test set used, gender, BMI, and race. Significant differences in DSC were identified based on age group and the degree of metal artifact. The majority (80%) of object meshes produced by both manual and automatic segmentation were rated as acceptable or higher quality. CONCLUSION: We developed a model for automatic mandible and lower dentition segmentation from CBCT scans in a demographically diverse cohort including a high degree of metal artifacts. The model demonstrated good accuracy on internal and external test sets, with majority acceptable quality from a clinical grader.

Dedicated Breast CT: Getting Ready for Prime Time.

Dedicated breast CT is an imaging modality that provides true 3D imaging of the breast with many advantages over current conventional breast imaging modalities. The addition of intravascular contrast increases the sensitivity of breast CT substantially. As such, there are immediate potential applications in the clinical workflow. These include using breast CT to replace much of the traditional diagnostic workup when faced with indeterminate breast lesions. Contrast-enhanced breast CT may be appropriate as a supplemental screening tool for women at high risk of breast cancer, similar to breast MRI. In addition, emerging studies are demonstrating the utility of breast CT in neoadjuvant chemotherapy tumor response monitoring as well as planning for surgical treatment options. While short exam times and fully 3D imaging in a noncompressed position are advantages of this modality, limited coverage of chest wall/axilla due to prone positioning and use of ionizing radiation are drawbacks. To date, several studies have reported on the performance characteristics of this promising modality.

Stroke Evaluation in the Interventional Suite Using Dual-Layer Detector Cone-Beam CT: a First-in-human Prospective Cohort Study (the Next Generation X-ray Imaging System Trial).

PURPOSE: Cone-beam CT in the interventional suite could be an alternative to CT to shorten door-to-thrombectomy time. However, image quality in cone-beam CT is limited by artifacts and poor differentiation between gray and white matter. This study compared non-contrast brain dual-layer cone-beam CT in the interventional suite to reference standard CT in stroke patients. METHODS: A prospective single-center study enrolled consecutive participants with ischemic or hemorrhagic stroke. The hemorrhage detection accuracy, per-region ASPECTS accuracy and subjective image quality (Likert scales for gray-white matter differentiation, structure perception and artifacts) were assessed by three neuroradiologists blinded to clinical data on dual-layer cone-beam CT 75 keV monoenergetic images compared to CT. Objective image quality was assessed by region-of-interest metrics. Non-inferiority for hemorrhage detection and ASPECTS accuracy was determined by the exact binomial test with a one-sided lower performance boundary prospectively set to 80% (98.75% CI). RESULTS: 27 participants were included (74 years ± 9; 19 female) in the hyperacute or acute stroke phase. One reader missed a small bleeding, but all hemorrhages were detected in the majority analysis (100% accuracy, CI lower boundary 86%, p = 0.002). ASPECTS majority analysis showed 90% accuracy (CI lower boundary 85%, p < 0.001). Sensitivity was 66% (individual readers 67%, 69%, and 76%), specificity was 97% (97%, 96%, 89%). Subjective and objective image quality were inferior to CT. CONCLUSION: In a small single-center cohort, dual-layer cone-beam CT showed non-inferior hemorrhage detection and ASPECTS accuracy to CT. Despite inferior image quality, the technique may be useful for stroke evaluation in the interventional suite. TRIAL REGISTRATION NUMBER: NCT04571099 (clinicaltrials.gov). Prospectively registered 2020-09-04.

Automated segmentation and deep learning classification of ductopenic parotid salivary glands in sialo cone-beam CT images.

PURPOSE: This study addressed the challenge of detecting and classifying the severity of ductopenia in parotid glands, a structural abnormality characterized by a reduced number of salivary ducts, previously shown to be associated with salivary gland impairment. The aim of the study was to develop an automatic algorithm designed to improve diagnostic accuracy and efficiency in analyzing ductopenic parotid glands using sialo cone-beam CT (sialo-CBCT) images. METHODS: We developed an end-to-end automatic pipeline consisting of three main steps: (1) region of interest (ROI) computation, (2) parotid gland segmentation using the Frangi filter, and (3) ductopenia case classification with a residual neural network (RNN) augmented by multidirectional maximum intensity projection (MIP) images. To explore the impact of the first two steps, the RNN was trained on three datasets: (1) original MIP images, (2) MIP images with predefined ROIs, and (3) MIP images after segmentation. RESULTS: Evaluation was conducted on 126 parotid sialo-CBCT scans of normal, moderate, and severe ductopenic cases, yielding a high performance of 100% for the ROI computation and 89% for the gland segmentation. Improvements in accuracy and F1 score were noted among the original MIP images (accuracy: 0.73, F1 score: 0.53), ROI-predefined images (accuracy: 0.78, F1 score: 0.56), and segmented images (accuracy: 0.95, F1 score: 0.90). Notably, ductopenic detection sensitivity was 0.99 in the segmented dataset, highlighting the capabilities of the algorithm in detecting ductopenic cases. CONCLUSIONS: Our method, which combines classical image processing and deep learning techniques, offers a promising solution for automatic detection of parotid glands ductopenia in sialo-CBCT scans. This may be used for further research aimed at understanding the role of presence and severity of ductopenia in salivary gland dysfunction.

CT in musculoskeletal imaging: still helpful and for what?

Computed tomography (CT) is a common modality employed for musculoskeletal imaging. Conventional CT techniques are useful for the assessment of trauma in detection, characterization and surgical planning of complex fractures. CT arthrography can depict internal derangement lesions and impact medical decision making of orthopedic providers. In oncology, CT can have a role in the characterization of bone tumors and may elucidate soft tissue mineralization patterns. Several advances in CT technology have led to a variety of acquisition techniques with distinct clinical applications. These include four-dimensional CT, which allows examination of joints during motion; cone-beam CT, which allows examination during physiological weight-bearing conditions; dual-energy CT, which allows material decomposition useful in musculoskeletal deposition disorders (e.g., gout) and bone marrow edema detection; and photon-counting CT, which provides increased spatial resolution, decreased radiation, and material decomposition compared to standard multi-detector CT systems due to its ability to directly translate X-ray photon energies into electrical signals. Advanced acquisition techniques provide higher spatial resolution scans capable of enhanced bony microarchitecture and bone mineral density assessment. Together, these CT acquisition techniques will continue to play a substantial role in the practices of orthopedics, rheumatology, metabolic bone, oncology, and interventional radiology.

A rotating beam-blocker method for cone beam CT scatter correction.

BACKGROUND: Cone beam CT (CBCT) is widely utilized in clinics. However, the scatter artifact degrades the CBCT image quality, hampering the expansion of CBCT applications. Recently, beam-blocker methods have been used for CBCT scatter correction and proved their high cost-effectiveness. PURPOSE: A rotating beam-blocker (RBB) method for CBCT scatter correction was proposed to complete scatter correction and image reconstruction within a single scan in both full- and half-fan scan scenarios. METHODS: The RBB consisted of two open regions and two blocked regions, and was designed as a centrosymmetric structure. The open and blocked projections could be alternatively obtained within one single rotation. The open projections were corrected with the scatter signal calculated from the blocked projections, and then used to reconstruct the 3D image via the Feldkamp-Davis-Kress algorithm. The performance of the RBB method was evaluated on head and pelvis phantoms in scenarios with and without a bowtie filter. The images obtained from nine repeated scans in each scenario were used to calculate the evaluation metrics including the CT number error, spatial nonuniformity (SNU) and contrast-to-noise ratio (CNR). RESULTS: For the head phantom, the CT number error was decreased to <5 after scatter correction from >200 HU before correction when scanned without a bowtie filter, and to <4 from >160 HU when scanned with a full bowtie filter. For the pelvis phantom, the CT number error was reduced to <12 after scatter correction from >250 HU before correction when scanned without a bowtie filter, and to <10 from >190 HU when scanned with a half bowtie filter. After scatter correction, the uniformity and contrast were both improved, resulting in an SNU of >79% decrease and CNR of >2 times increase, respectively. CONCLUSIONS: High-quality CBCT images could be obtained in a single scan after using the proposed RBB method for scatter correction, enabling more accurate image guidance for surgery and radiation therapy applications. With almost no time delay between the successive open and blocked projections, the RBB method could eliminate the motion-induced anatomical mismatches between the corresponding open and blocked projections and could find particular usefulness in thoracic and abdominal imaging.

Clinical applicability of Linac-integrated CBCT based NIPAM 3D dosimetry: a dual-institutional investigation.

Objective.To develop and benchmark a novel 3D dose verification technique consisting of polymer gel dosimetry (PGD) with cone-beam-CT (CBCT) readout through a two-institution study. The technique has potential for wide and robust applicability through reliance on CBCT readout.Approach. Three treatment plans (3-field, TG119-C-shape spine, 4-target SRS) were created by two independent institutions (Institutions A and B). A Varian Truebeam linear accelerator was used to deliver the plans to NIPAM polymer gel dosimeters produced at both institutions using an identical approach. For readout, a slow CBCT scan mode was used to acquire pre- and post-irradiation images of the gel (1 mm slice thickness). Independent gel analysis tools were used to process the PGD images (A: VistaAce software, B: in-house MATLAB code). Comparing planned and measured doses, the analysis involved a combination of 1D line profiles, 2D contour plots, and 3D global gamma maps (criteria ranging between 2%1 mm and 5%2 mm, with a 10% dose threshold).Main results. For all gamma criteria tested, the 3D gamma pass rates were all above 90% for 3-field and 88% for the SRS plan. For the C-shape spine plan, we benchmarked our 2% 2 mm result against previously published work using film analysis (93.4%). For 2%2 mm, 99.4% (Institution A data), and 89.7% (Institution B data) were obtained based on VistaAce software analysis, 83.7% (Institution A data), and 82.9% (Institution B data) based on MATLAB.Significance. The benchmark data demonstrate that when two institutions follow the same rigorous procedures gamma passing rates up to 99%, for 2%2 mm criteria can be achieved for substantively different treatment plans. The use of different software and calibration techniques may have contributed to the variation in the 3D gamma results. By sharing the data across institutions, we observe the gamma passing rate is more consistent within each pipeline, indicating the need for standardized analysis methods.

Cone-Beam CT Images as an Indicator of QACT During Adaptive Proton Therapy of Extremity Sarcomas.

Purpose: Periodic quality assurance CTs (QACTs) are routine in proton beam therapy. In this study, we tested whether the necessity for a QACT could be determined by evaluating the change in beam path length (BPL) on daily cone-beam CT (CBCT). Patients and Methods: In this Institutional Review Board-approved study, we retrospectively analyzed 959 CBCT images from 78 patients with sarcomas treated with proton pencil-beam scanning. Plans on 17 QACTs out of a total of 243 were clinically determined to be replanned for various reasons. Daily CBCTs were retrospectively analyzed by automatic ray-tracing of each beam from the isocenter to the skin surface along the central axis. A script was developed for this purpose. Patterns of change in BPL on CBCT images were compared to those from adaptive planning using weekly QACTs. Results: Sixteen of the 17 adaptive replans showed BPL changes ≥4 mm for at least 1 of the beams on 3 consecutive CBCT sessions. Similarly, 43 of 63 nonadaptively planned patients had BPL changes <4 mm for all of the beams. A new QACT criterium of a BPL change of any beam ≥4 mm on 3 consecutive CBCT sessions resulted in a sensitivity of 94.1% and a specificity of 68.3%. Had the BPL change been used as the QACT predictor, a total of 37 QACTs would have been performed rather than 243 QACTs in clinical practice. Conclusion: The use of BPL changes on CBCT images represented a significant reduction (85%) in total QACT burden while maintaining treatment quality and accuracy. QACT can be performed only when it is needed, but not in a periodic manner. The benefits of reducing QACT frequency include reducing imaging dose and optimizing patient time and staff resources.

Vessel-targeted compensation of deformable motion in interventional cone-beam CT.

The present standard of care for unresectable liver cancer is transarterial chemoembolization (TACE), which involves using chemotherapeutic particles to selectively embolize the arteries supplying hepatic tumors. Accurate volumetric identification of intricate fine vascularity is crucial for selective embolization. Three-dimensional imaging, particularly cone-beam CT (CBCT), aids in visualization and targeting of small vessels in such highly variable anatomy, but long image acquisition time results in intra-scan patient motion, which distorts vascular structures and tissue boundaries. To improve clarity of vascular anatomy and intra-procedural utility, this work proposes a targeted motion estimation and compensation framework that removes the need for any prior information or external tracking and for user interaction. Motion estimation is performed in two stages: (i) a target identification stage that segments arteries and catheters in the projection domain using a multi-view convolutional neural network to construct a coarse 3D vascular mask; and (ii) a targeted motion estimation stage that iteratively solves for the time-varying motion field via optimization of a vessel-enhancing objective function computed over the target vascular mask. The vessel-enhancing objective is derived through eigenvalues of the local image Hessian to emphasize bright tubular structures. Motion compensation is achieved via spatial transformer operators that apply time-dependent deformations to partial angle reconstructions, allowing efficient minimization via gradient backpropagation. The framework was trained and evaluated in anatomically realistic simulated motion-corrupted CBCTs mimicking TACE of hepatic tumors, at intermediate (3.0 mm) and large (6.0 mm) motion magnitudes. Motion compensation substantially improved median vascular DICE score (from 0.30 to 0.59 for large motion), image SSIM (from 0.77 to 0.93 for large motion), and vessel sharpness (0.189 mm-1 to 0.233 mm-1 for large motion) in simulated cases. Motion compensation also demonstrated increased vessel sharpness (0.188 mm-1 before to 0.205 mm-1 after) and reconstructed vessel length (median increased from 37.37 to 41.00 mm) on a clinical interventional CBCT. The proposed anatomy-aware motion compensation framework presented a promising approach for improving the utility of CBCT for intra-procedural vascular imaging, facilitating selective embolization procedures.

Accuracy of Volumetric Bone Mineral Density Measurement in Weight Bearing, Cone Beam Computed Tomography.

BACKGROUND: Weight bearing computed tomography (WBCT) utilizes cone beam CT technology to provide assessments of lower limb joint structures while they are functionally loaded. Grey-scale values indicative of X-ray attenuation that are output from cone beam CT are challenging to calibrate, and their use for bone mineral density (BMD) measurement remains debatable. To determine whether WBCT can be reliably used for cortical and trabecular BMD assessment, we sought to establish the accuracy of BMD measurements at the knee using modern WBCT by comparing them to measurements from conventional CT. METHODS: A hydroxyapatite phantom with three inserts of varying densities was used to systematically quantify signal uniformity and BMD accuracy across the acquisition volume. We evaluated BMD in vivo (n = 5, female) using synchronous and asynchronous calibration techniques in WBCT and CT. To account for variation in attenuation along the height (z-axis) of acquisition volumes, we tested a height-dependent calibration approach for both WBCT and CT images. RESULTS: Phantom BMD measurement error in WBCT was as high as 15.3% and consistently larger than CT (up to 5.6%). Phantom BMD measures made under synchronous conditions in WBCT improved measurement accuracy by up to 3% but introduced more variability in measured BMD. We found strong correlations (R = 0.96) as well as wide limits of agreement (-324 mgHA/cm3 to 183 mgHA/cm3) from Bland-Altman analysis between WBCT and CT measures in vivo that were not improved by height-dependent calibration. CONCLUSION: Whilst BMD accuracy from WBCT was found to be dependent on apparent density, accuracy was independent of the calibration technique (synchronous or asynchronous) and the location of the measurement site within the field of view. Overall, we found strong correlations between BMD measures from WBCT and CT and in vivo measures to be more accurate in trabecular bone regions. Importantly, WBCT can be used to distinguish between anatomically relevant differences in BMD, however future work is necessary to determine the repeatability and sensitivity of BMD measures in WBCT.

Improved soft-tissue visibility on cone-beam computed tomography with an image-generating artificial intelligence model using a cyclic generative adversarial network.

OBJECTIVES: The objective of this study was to enhance the visibility of soft tissues on cone-beam computed tomography (CBCT) using a CycleGAN network trained on CT images. METHODS: Training and evaluation of the CycleGAN were conducted using CT and CBCT images collected from Aichi Gakuin University (α facility) and Osaka Dental University (ß facility). Synthesized images (sCBCT) output by the CycleGAN network were evaluated by comparing them with the original images (oCBCT) and CT images, and assessments were made using histogram analysis and human scoring of soft-tissue anatomical structures and cystic lesions. RESULTS: The histogram analysis showed that on sCBCT, soft-tissue anatomical structures showed significant shifts in voxel intensity toward values resembling those on CT, with the mean values for all structures approaching those of CT and the specialists' visibility scores being significantly increased. However, improvement in the visibility of cystic lesions was limited. CONCLUSIONS: Image synthesis using CycleGAN significantly improved the visibility of soft tissue on CBCT, with this improvement being particularly notable from the submandibular region to the floor of the mouth. Although the effect on the visibility of cystic lesions was limited, there is potential for further improvement through refinement of the training method.

Radiation dose during transarterial chemoembolization and associated factors.

PURPOSE: To provide detailed reports on radiation doses during transarterial chemoembolization (TACE) in the cone-beam computed tomography (CBCT) era and to identify the associated factors. METHODS: This retrospective study included 385 consecutive patients who underwent initial conventional TACE for hepatocellular carcinoma (HCC) between January 2016 and December 2017. In most cases, CBCT was performed at the common hepatic artery or celiac axis to confirm the location of the tumor and the three-dimensional hepatic artery anatomy. Superselective TACE was performed for all technically feasible cases. Information on total dose area product (DAP), total cumulative air kerma (CAK), fluoroscopy time, and DAP and CAK of each digital subtraction angiography (DSA) and CBCT scan was recorded. Multiple linear regression analysis was performed to identify the factors associated with increased DAP during TACE. RESULTS: The mean values of total DAP and CAK were 165.2 ± 81.2 (Gy·cm²) and 837.1 ± 571.0 (mGy), respectively. The mean fluoroscopy time was 19.1 ± 10.3 min. The mean DAP caused by fluoroscopy, DSA, and CBCT was 51.8 ± 43.9, 28.0 ± 24.1, and 83.9 ± 42.1 Gy·cm², respectively. Male sex, a high body mass index, largest tumor size > 3 cm, presence of aberrant right and left hepatic arteries, and superselective TACE were identified as independent predictors of increased total DAP during TACE. CONCLUSION: We were able to provide detailed reports on radiation doses during TACE and associated factors.

Accuracy of implant height and width measurement with triaxial rotation method based on cone-beam CT.

Objective: To investigate the accuracy of implant height and width measurement in the mandibular and maxillary first molar region based on cone-beam CT (CBCT) data, and to establish an accurate method for bone measurement in the implant region. Materials and methods: CBCT images of 122 patients with implant in mandibular or maxillary first molar region were retrospectively collected. Two methods were used to measure sagittal height (SH), coronal height (CH), sagittal width (SW), and coronal width (CW) of implants. Method 1 (general method): the images were analyzed using the built-in software NNT 9.0 software. SHl, CHl, SWl, and CWl were measured on the reconstructed sagittal and coronal based on the radiologist's own experience. Method 2 (triaxial rotation method): the raw data were demonstrated in Expert mode of NNT 9.0 software, in which the coronal axis and sagittal axis were rotated paralleling to the long axis of the implant for reconstruction, and then SH2, CH2, SW2, and CW2 were measured on the reconstructed sagittal and coronal images. The results of two methods were compared with the actual implant size (H0, W0). Paired T-test was performed for statistical analysis. Dahlberg formula was used to check the measurement error. Results: For method 1, there was no significant differences between SHl and H0 (P > 0.05), but significant differences between CHl and H0, SWl and W0, and CWl and W0 (P < 0.05). For method 2, there were no significant differences between all measurements and actual size (P > 0.05). The random error range measured using Dahlberg formula was 0.157-1.171 mm for general method and 0.017-0.05 mm for triaxial rotation method. Conclusion: The triaxial rotation method is accurate for implant height and width measurements on CBCT images and could be used in pre-operatively bone height and width measurement of potential implant sites.