0D/2D Co-Doping Network Enhancing Thermal Conductivity of Radiative Cooling Film for Electronic Device Thermal Management.

The radiative cooling has great potential for electronic device cooling without requiring any energy consumption. However, a low thermal conductivity of most radiative cooling materials limits their application. Herein, a multishape codoping strategy was proposed to achieve collaborative enhancement of thermal conductivity and radiative properties. The hBN-coated hollow SiO2 particles were prepared based on electrostatic self-assembly technology, which were then mixed with hBN platelets and doped into a poly(vinylidene fluoride-co-hexafluoropropylene) substrate. Discrete dipole approximation theory was employed to reveal the mechanism and optimize the particle size. The results showed that the multishape codoping method can significantly improve the radiative performance, with 94.9% reflectivity and 91.2% emissivity. In addition, this zero-dimensional and two-dimensional composite doping structure facilitated the formation of a thermal conduction network, which enhanced the thermal conductivity of the film up to 1.32 W m-1 K-1. The high thermal conductivity radiative cooling film can decrease the heater temperature from 58.8 to 31.3 °C, with a further reduction of temperature by 7.2 °C compared to the radiative cooling substrates with low thermal conductivity. The net cooling power of the film can reach 102.5 W m-2 under direct sunlight. This work provides a novel strategy for high-efficiency electronic device cooling.

Hybrid convergent procedure with proactive oesophageal cooling for the treatment of long-standing persistent atrial fibrillation: a case series.

Background: The hybrid convergent procedure is approved to treat symptomatic patients with long-standing persistent atrial fibrillation (AF). Despite direct visualization during surgical ablation as well as the use of luminal oesophageal temperature (LET) monitoring, oesophageal injury is still possible. A dedicated device for proactive oesophageal cooling has recently been cleared by the Food and Drug Administration to reduce the likelihood of ablation-related oesophageal injury resulting from radiofrequency cardiac ablation procedures. This report describes the first uses of proactive oesophageal cooling for oesophageal protection during the epicardial ablation portion of hybrid convergent procedures. Case summary: Five patients with long-standing persistent AF underwent hybrid convergent ablations with the use of proactive oesophageal cooling as means of oesophageal protection. All cases were completed successfully with no adverse effects. Most notably, cases were shorter when compared to cases using LET monitoring, likely due to lack of pauses for overheating of the oesophagus that would otherwise be required to prevent damage to the oesophagus. Discussion: This report describes the first uses of proactive oesophageal cooling for oesophageal protection during the epicardial ablation portion of five hybrid convergent procedures. Use of cooling enabled uninhibited deployment of lesions without the need to pause energy delivery due to elevated temperatures in the oesophagus, providing a feasible alternative to LET monitoring.

Three live births after human embryo vitrification with the use of aluminum oxide as an intermediate cooling agent: a case report.

Objective: To study the possibility of increasing the cooling rates of the vitrification procedure in a closed system with the use of aluminum oxide as an intermediate coolant. Design: Case report. Subjects: Six patients undergoing procedures for assisted reproduction. Intervention: Comparative studies of cryopreservation of donor embryos with aluminum oxide as an intermediate cooling agent (experimental group) and without it (control group) have been performed. After thawing, the embryo morphology and its potential to develop to the blastocyst stage have been assessed. The methodology was then applied to clinical practice. Main Outcome Measures: Twenty embryos of 6 patients have been vitrified on day 4 after fertilization with the use of aluminum oxide as an intermediate coolant. Fourteen of them have been thawed. All have displayed normal morphology and 10 have formed blastocysts after 24 hours of culture. Four of the patients received embryo transfer with 2 embryos and the other 2 with single embryos. Results: After preliminary comparative studies of embryos frozen with aluminum oxide and a control group, the results showed no statistically significant difference between their quality and potential to reach to blastocyst stage. That gave us ground to apply the methodology in clinical practice. After the embryo transfer, 3 clinical pregnancies with successful live births have been obtained. Conclusions: Our experience shows that preimplantation embryos can be cryopreserved aseptically, in closed systems, with the help of aluminum oxide as an intermediate coolant.

Mechanisms of action behind the protective effects of proactive esophageal cooling during radiofrequency catheter ablation in the left atrium.

Proactive esophageal cooling for the purpose of reducing the likelihood of ablation-related esophageal injury resulting from radiofrequency (RF) cardiac ablation procedures is increasingly being used and has been Food and Drug Administration cleared as a protective strategy during left atrial RF ablation for the treatment of atrial fibrillation. In this review, we examine the evidence supporting the use of proactive esophageal cooling and the potential mechanisms of action that reduce the likelihood of atrioesophageal fistula (AEF) formation. Although the pathophysiology behind AEF formation after thermal injury from RF ablation is not well studied, a robust literature on fistula formation in other conditions (eg, Crohn disease, cancer, and trauma) exists and the relationship to AEF formation is investigated in this review. Likewise, we examine the abundant data in the surgical literature on burn and thermal injury progression as well as the acute and chronic mitigating effects of cooling. We discuss the relationship of these data and maladaptive healing mechanisms to the well-recognized postablation pathophysiological effects after RF ablation. Finally, we review additional important considerations such as patient selection, clinical workflow, and implementation strategies for proactive esophageal cooling.

A configuration for cooling assisted organic solvent coated thin film microextraction after dispersive liquid-liquid microextraction method: A microextraction method for ultra-trace analyzing of volatile sample.

A combination of the dispersive liquid-liquid microextraction (DLLME) method based on the total vaporization procedure and cooling-assisted organic solvent-coated thin film microextraction (TFME) was applied for extracting chlorpyrifos (as the model compound). Based on the high thermal conductivity, a nickel foam thin film with the dimensions of 5.0 mm × 5.0 mm was used as a substrate for holding the organic solvent. Supporting thin film by organic solvent increases the thickness and contact area of the film relative to TFME or single drop microextraction (SDME) alone, resulting in a dramatic increase in the extraction efficiency. To protect the organic solvent and enhance the analyte distribution coefficient between the film and the vapor phase, a cooling system was applied. The proposed design was effective due to condensing the target analyte only on the uniform cooled thin film and not on the other regions in the extraction chamber. A corona discharge ionization source-ion mobility spectrometer was employed to identify the analyte. After optimizing the effective parameters, the limits of quantification (S/N = 10) and detection (S/N = 3) were calculated 0.1 and 0.03 µg L-1, respectively, and the dynamic range was measured between 0.1 and 7.0 µg L-1, with a determination coefficient of 0.9997. For three concentration levels of 0.1, 3.0, and 7.0 µg L-1, the relative standard deviations (n = 3) as the repeatability index were to be 6 %, 5 %, and 4 % for intra-day and 9 %, 6 %, and 5 % for inter-day, respectively. The enrichment factor was also calculated to be 3630 for the analyte concentration of 1.0 µg L-1. Well water, potato, and agricultural wastewater were analyzed as the real samples and the relative recovery values were measured between 92 % and 99 %. The accuracy of the proposed technique was validated by the European Standards EN 12393 method. In this approach, two steps of analyte extraction (DLLME and TFME) were used consecutively, resulting in better preconcentration and reduced matrix interference during cleaning-up.

The efficacy of various interventions as good strategies to reduce pain in botulinum neurotoxin A for wrinkles. A systematic review of the randomized controlled trials (RCTs).

Various topical interventions have been described to minimize botulinum neurotoxin-A (BoNT)-induced pain. The purpose of this study is to conduct a systematic review of relevant randomized controlled trials (RCTs) to compare the efficacy of pain relief methods during BoNT injection. PubMed, Scopus, and Web of Science were searched using "Botox," "Botulinum," or "BTX." We identified RCTs in which BoNT were injected to eliminate wrinkles. The pain score was the study outcome, and pain reduction method was compared with routine one. The meta-analysis was reported using the PRISMA checklist. The Higgins I(I2) statistical model assessed results heterogeneity. Two thousand one hundred and twenty-three articles were identified, thirteen articles eligible. Two hundred and sixty-two healthy volunteers were performed on these RCTs. Meta-analysis evaluated different methods to ease BoNT injection pain, and these methods significantly improved outcomes by 0.23% (95%CI, 0.11-0.46, p = .000). Subgroup analysis based on injection area showed no significant heterogeneity, but heterogeneity decreased when subgroup analysis based on other methods was done (Cochran's Q test = 115.52, p = .0001, I2 = 87.9%). This meta-analysis confirms the effectiveness of pain relief methods during BoNT injection. Evaluation of different methods showed their effectiveness, but finding the best method requires comparative studies, although the role of pH and EMLA has been proven.

Exploratory Feasibility Study of Cerebral Cooling by Transpulmonary Cooling During Cardiac Arrest in a Swine Cardiac Arrest Model.

Studies on targeted temperature management for postcardiac arrest syndrome have shown no difference in outcomes between normothermia and hypothermia in patients with postcardiac arrest brain injury. Therefore, further development of therapeutic methods for temperature control in cardiac arrest patients is desirable. Although animal studies have shown that inducing hypothermia during cardiac arrest improves outcomes, no clinically effective method has yet been reported. We investigated whether intra-arrest lung cooling (IALC) effectively lowers brain temperature. A device capable of cooling oxygen was developed. The pigs were subjected to cardiac arrest using the device, ventilated, cooled during cardiopulmonary resuscitation, and resuscitated for 1 hour, with changes in brain temperature closely monitored. A device capable of cooling oxygen to -30°C was used to cool the lungs during cardiac arrest. Through this approach, IALC successfully reduced the brain temperature. Optimal cooling efficiency was observed when chest compressions and ventilation were synchronized at a ratio of 5:1, resulting in an approximate brain temperature reduction of 1.5°C/h. Our successful development of an oxygen-cooling device underscores the potential for lowering brain temperature through IALC using inhaled oxygen cooling.

Optimization of cooling rate of Q-P treated 42SiCr steel using AI digital twinning.

In the continuously advancing field of mechanical engineering, digitalization is bringing a major transformation, specifically with the concept of digital twins. Digital twins are dynamic digital models of real-world systems and processes, crucial for Industry 4.0 and the emerging Industry 5.0, which are changing how humans and machines work together in manufacturing. This paper explores the combination of physics-based and data-driven modeling using advanced Artificial Intelligence (AI) and Machine Learning (ML) techniques. This approach provides a comprehensive understanding of mechanical systems, improving materials design and manufacturing processes. The focus is on the advanced 42SiCr alloy, where AI-driven digital twinning is used to optimize cooling rates during Quenching and Partitioning (Q-P) treatments. This leads to significant improvements in the mechanical properties of 42SiCr steel. Given its complex properties influenced by various factors, this alloy is perfect for digital twinning. The Q-P heat treatment process not only restores the material's deformability but also gives it advanced high-strength steel (AHSS) properties. The findings show how AI and ML can effectively guide the development of high-strength steels and enhance their treatment processes. Additionally, integrating digital twins with new technologies like the Metaverse offers exciting possibilities for simulated production, remote monitoring, and collaborative design. By establishing a clear workflow from physical to digital twins and presenting empirical results, this paper connects theoretical modeling with practical applications, paving the way for smarter manufacturing solutions in mechanical engineering. Furthermore, this paper analyzes how digital twins can be integrated into advanced technologies like the Metaverse, opening up new possibilities for simulated production, remote monitoring, design collaboration, training simulations, analytics, and complete supply chain visibility. This integration is a crucial step toward realizing the full potential of digitalization in mechanical engineering.

An arctic breeding songbird overheats during intense activity even at low air temperatures.

Birds maintain some of the highest body temperatures among endothermic animals. Often deemed a selective advantage for heat tolerance, high body temperatures also limits birds' thermal safety margin before reaching lethal levels. Recent modelling suggests that sustained effort in Arctic birds might be restricted at mild air temperatures, which may require reductions in activity to avoid overheating, with expected negative impacts on reproductive performance. We measured within-individual changes in body temperature in calm birds and then in response to an experimental increase in activity in an outdoor captive population of Arctic, cold-specialised snow buntings (Plectrophenax nivalis), exposed to naturally varying air temperatures (- 15 to 36 °C). Calm buntings exhibited a modal body temperature range from 39.9 to 42.6 °C. However, we detected a significant increase in body temperature within minutes of shifting calm birds to active flight, with strong evidence for a positive effect of air temperature on body temperature (slope = 0.04 °C/ °C). Importantly, by an ambient temperature of 9 °C, flying buntings were already generating body temperatures ≥ 45 °C, approaching the upper thermal limits of organismal performance (45-47 °C). With known limited evaporative heat dissipation capacities in these birds, our results support the recent prediction that free-living buntings operating at maximal sustainable rates will increasingly need to rely on behavioural thermoregulatory strategies to regulate body temperature, to the detriment of nestling growth and survival.

Effect of the Cooling Liquid on the Milled Interface in the Combined Process of Milling and Direct Metal Deposition.

The combination of Direct Metal Deposition (DMD) with milling offers numerous advantages for the manufacturing of complex geometry parts demanding high dimensional accuracy and surface quality. To reach this, a process strategy alternation between both processes is often required, leaving the milled surface with a layer of cooling fluid before adding material by DMD. This paper investigates the effect of cooling liquid on the milled interface in the combined process of milling and DMD. Five different interface conditions were examined, employing four distinct cleaning techniques to assess their impact on the quality of the interface. Key metrics analysed included hydrogen content, carbon content, and porosity levels at the interface. Cleaning techniques were evaluated to determine their necessity in enhancing the interface quality in the combined DMD and milling production process. Results from this study provide essential insights into the optimal cleaning requirements for improving the interface integrity in hybrid manufacturing processes, which could lead to more reliable and efficient production methods in industrial applications.

Overview of Multi-Scale Simulation Techniques for Three Typical Steel Manufacturing Processes.

Steel products typically undergo intricate manufacturing processes, commencing from the liquid phase, with casting, hot rolling, and laminar cooling being among the most crucial processes. In the background of carbon neutrality, thin-slab casting and direct rolling (TSCR) technology has attracted significant attention, which integrates the above three processes into a simpler and more energy-efficient sequence compared to conventional methods. Multi-scale computational modeling and simulation play a crucial role in steel design and optimization, enabling the prediction of properties and microstructure in final steel products. This approach significantly reduces the time and cost of production compared to traditional trial-and-error methodologies. This study provides a review of cross-scale simulations focusing on the casting, hot-rolling, and laminar cooling processes, aiming at presenting the key techniques for realizing cross-scale simulation of the TSCR process.

An Active Strategy to Reduce Residual Alkali for High-Performance Layered Oxide Cathode Materials of Sodium-Ion Batteries.

Residual alkali is one of the biggest challenges for the commercialization of sodium-based layered transition metal oxide cathode materials since it can even inevitably appear during the production process. Herein, taking O3-type Na0.9Ni0.25Mn0.4Fe0.2Mg0.1Ti0.05O2 as an example, an active strategy is proposed to reduce residual alkali by slowing the cooling rate, which can be achieved in one-step preparation method. It is suggested that slow cooling can significantly enhance the internal uniformity of the material, facilitating the reintegration of Na+ into the bulk material during the calcination cooling phase, therefore substantially reducing residual alkali. The strategy can remarkably suppress the slurry gelation and gas evolution and enhance the structural stability. Compared to naturally cooled cathode materials, the capacity retention of the slowly cooled electrode material increases from 76.2% to 85.7% after 300 cycles at 1 C. This work offers a versatile approach to the development of advanced cathode materials toward practical applications.

Robust, stable cooling cellulose composite: Coupling nano-SiO2 and cellulose acetate in natural cellulose.

Passive radiative cooling material of cellulose by coupling inorganic nanoparticles, have demonstrated competitive advantages in sustainably cooling buildings and constructions due to their voluminous availability, biodegradability, renewability, and natural origin. However, the weak stability of cellulose-inorganic nanoparticle materials when exposed to water or external forces remains a significant challenge that impedes their practical application. In this study, we proposed an easy-to-prepare, scalable, and robust cooling cellulose composite by coupling nano-SiO2 and cellulose acetate (CA) within cellulose fibers, using the mature pulping and paper process (filling of inorganic particles of nano-SiO2 and subsequent sizing of polymer of CA). More importantly, the CA molecules form the strong bonding with the cellulose molecules due to the high similarity of their molecular structure, which makes CA function as a "glue" to effectively fasten nano-SiO2 on the cellulose fibers. Correspondingly, our cellulose composite features desirable robustness and structural stability even undergoing mechanical beating and water-soaking treatments, demonstrating its excellent robustness and desirable adaptability to natural environments, such as wind and rain. As a result, despite undergoing water-soaking (for 40 days) or environmental exposure (for 90 days), the cooling cellulose composite still exhibits excellent solar reflectance (>95 %) and infrared thermal emissivity (>0.95 at 8-13 µm), enabling sub-ambient temperature (∼6.5 °C during daytime and ∼8 °C at nighttime) throughout the day. Our cooling cellulose composite demonstrates promising potential as an environmentally friendly, low-cost, and stable cooling material in our low-carbon society.

Post-exercise hot or cold water immersion does not alter perception of effort or neuroendocrine responses during subsequent moderate-intensity exercise.

Post-exercise hot (HWI) and cold (CWI) water immersion are popular strategies used by athletes in a range of sporting contexts, such as enhancing recovery or adaptation. However, prolonged heating bouts increase neuroendocrine responses that are associated with perceptions of fatigue. Fourteen endurance-trained runners performed three trials consisting of two 45-min runs at 95% lactate threshold on a treadmill separated by 6 h of recovery. Following the first run, participants completed one of HWI (30 min, 40°C), CWI (15 min, 14°C) or control (CON, 30 min rest in ambient conditions) in a randomised order. Perceived effort and recovery were measured using ratings of perceived exertion (RPE) and the Acute Recovery and Stress Scale (ARSS), whilst physiological responses including venous concentrations of a range of neuroendocrine markers, superficial femoral blood flow, heart rate and rectal temperature were measured. Exercise increased neuroendocrine responses of interleukin-6, adrenaline and noradrenaline (all P < 0.001). Additionally, perceptions of overall recovery (P < 0.001), mental performance capacity (P = 0.02), physical performance capability (P = 0.01) and emotional balance (P = 0.03) were reduced prior to the second run. However, there was no effect of condition on these variables (P > 0.05), nor RPE (P = 0.68), despite differences in rectal temperature, superficial femoral blood flow following the first run, and participants' expected recovery prior to the intervention (all P < 0.001). Therefore, athletes may engage in post-exercise hot or cold-water immersion without negatively impacting moderate-intensity training sessions performed later the same day.

Assessing the cooling potential of climate change adaptation measures in rural areas.

Atmospheric heat has become a major public concern in a rapidly warming world. Evapotranspiration, however, provides effective land surface cooling during the vegetation period. Adversely, modern cultural landscapes - due to both water and potential evapotranspiration pathways lacking - are increasingly incapable of offering this important benefit. We hypothesised that concerted measures for a revived landscape water retention can fuel plant transpiration, especially during dry periods, and thus contribute to climate change adaptation by stabilising the regional climate. Seeking nature-based ways to an improved landscape water retention, we used the land surface temperature (LST) as a proxy for landscape mesoclimate. For our drought-prone rural study area, we identified potential candidate environmental predictors for which we established statistical relationships to LST. We then, from a set of potential climate change adaptation measures, mapped selected items to potential locations of implementation. Building on that, we evaluated a certain measures' probable cooling effect using (i) the fitted model and (ii) the expected expression of predictors before and after a hypothetical measure implementation. In the modelling, we took into account the spatial and temporal autocorrelation of the LST data and thus achieved realistic parameter estimates. Using the candidate predictor set and the model, we were able to establish a ranking of the effectiveness of climate adaptation measures. However, due to the spatial variability of the predictors, the modelled LST is site-specific. This results in a spatial differentiation of a measure's benefit. Furthermore, seasonal variations occur, such as those caused by plant growth. On average, the afforestation of arable land or urban brownfields, and the rewetting of former wet meadows have the largest cooling capacities of up to 3.5 K. We conclude that heat countermeasures based on fostering both evapotranspiration and landscape water retention, even in rural regions, offer promising adaptation ways to atmospheric warming.

Unveiling the Effect of Cooling Rate on Grown-in Defects Concentration in Polycrystalline Perovskite Films for Solar Cells with Improved Stability.

Numerous efforts are devoted to reducing the defects at perovskite surface and/or grain boundary; however, the grown-in defects inside grain is rarely studied. Here, the influence of cooling rate on the point defects concentration in polycrystalline perovskite film during heat treatment processing is investigated. With the combination of theoretical and experimental studies, this work reveals that the supersaturated point defects in perovskite films generate during the cooling process and its concentration improves as the cooling rate increases. The supersaturated point defects can be minimized through slowing the cooling rate. As a result, the optimized FAPbI3 polycrystalline films achieve a superior carrier lifetime of up to 12.6 µs and improved stability. The champion device delivers a 25.47% PCE (certified 24.7%) and retain 90% of their initial value after >1100 h of operation at the maximum power point. These results provide a fundamental understanding of the mechanisms of grown-in defects formation in polycrystalline perovskite film.

New Perspective to Evaluate the Carbon Offsetting by Urban Blue-Green Infrastructure: Direct Carbon Sequestration and Indirect Carbon Reduction.

Urban blue-green infrastructure (BGI) offers a multitude of ecological advantages to residents, thereby playing a pivotal role in fortifying urban resilience and fostering the development of climate-resilient cities. Nonetheless, current research falls short of a comprehensive analysis of BGI's overall potential for carbon reduction and its indirect carbon reduction impact. To fill this research gap, we utilized the integrated valuation of ecosystem services and trade-offs model and remote sensing estimation algorithm to quantify the direct carbon sequestration and resultant indirect carbon reduction facilitated by the BGI within the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) (China). To identify the regions that made noteworthy contributions to carbon offsets and outliers, spatial autocorrelation analysis was also employed. The findings of this study reveal that in 2019, the BGI within the study area contributed an overall carbon offset of 1.5 × 108 t·C/yr, of which 3.5 × 107 and 11.0 × 107 t·C/yr were the result of direct carbon sequestration and indirect carbon reduction, respectively. The GBA's total CO2 emissions were 1.1 × 108 t in 2019. While the direct carbon sequestration offset 32.0% of carbon emissions, the indirect carbon reduction mitigated 49.9% of potential carbon emissions. These results highlight the critical importance of evaluating BGI's indirect contribution to carbon reduction. The findings of this study provide a valuable reference for shaping management policies that prioritize the protection and restoration of specific areas, thereby facilitating the harmonized development of carbon offset capabilities within urban agglomerations.

A study of size threshold for cooling effect in urban parks and their cooling accessibility and equity.

Rapid urbanization has led to increasingly prominent urban heat island phenomena and social inequality. It is urgent to quantify the threshold area of urban parks from multiple perspectives to maximize the cooling effect and improve the equity of park cooling services. Using 33 urban parks in Harbin City as research objects, four indices, i.e., park cooling intensity (PCI), park cooling distance (PCD), park cooling area (PCA), and park cooling efficiency (PCE), were used to explore the park cooling effect and the threshold value of efficiency (TVoE) of the size. The OD (origin-destination) matrix model was constructed to assess the spatial accessibility from the community to the cooling range. The Gini coefficient was used to assess the equity of cooling range accessibility. The relative contribution of each influencing factor to the cooling indicator was quantified through regression modeling. The results showed that the average PCI was 3.27 â„ƒ, the average PCD was 277 m, the average PCA was 115.35 ha, and the average PCE was 5.74. Gray space area was the dominant factor for PCI, PCD, and PCA (relative contributions of 100%, 31%, and 19%, respectively). Park area was the dominant factor for PCE (relative contribution of 28%). The TVoE of park sizes based on PCA and PCE were calculated as 82.37 ha and 2.56 ha, respectively. 39.2% and 94.01% of communities can reach cooling ranges within 15 min in walk mode and transit mode, respectively. Approximately 18% of neighborhood residents are experiencing severe inequities in cooling range accessibility. This study can guide park design that maximizes cooling effects, as well as inform city planners on more equitable allocation of urban park resources.

Switchable and Tunable Radiative Cooling: Mechanisms, Applications, and Perspectives.

The cost of annual energy consumption in buildings in the United States exceeds 430 billion dollars ( Science 2019, 364 (6442), 760-763), of which about 48% is used for space thermal management (https://www.iea.org/reports/global-status-report-for-buildings-and-construction-2019), revealing the urgent need for efficient thermal management of buildings and dwellings. Radiative cooling technologies, combined with the booming photonic and microfabrication technologies ( Nature 2014, 515 (7528), 540-544), enable energy-free cooling by radiative heat transfer to outer space through the atmospheric transparent window ( Nat. Commun. 2024, 15 (1), 815). To pursue all-season energy savings in climates with large temperature variations, switchable and tunable radiative coolers (STRC) have emerged in recent years and quickly gained broad attention. This Perspective introduces the existing STRC technologies and analyzes their benefits and challenges in future large-scale applications, suggesting ways for the development of future STRCs.

Thermal Activation of Anti-Stokes Photoluminescence in CsPbBr3 Perovskite Nanocrystals: The Role of Surface Polaron States.

Optically driven cooling of a material, or optical refrigeration, is possible when optical up-conversion via anti-Stokes photoluminescence (ASPL) is achieved with near-unity quantum yield. The recent demonstration of optical cooling of CsPbBr3 perovskite nanocrystals (NCs) has provided a path forward in the development of semiconductor-based optical refrigeration strategies. However, the mechanism of ASPL in CsPbBr3 NCs is not yet settled, and the prospects for cooling technologies strongly depend on details of the mechanism. By analyzing the Arrhenius behavior of ASPL in CsPbBr3 NCs, we investigated the relationship between the average energy gained per photon during up conversion, ΔE, and the thermal activation energy, Ea. We find that Ea is systematically larger than ΔE, and that Ea increases for larger ΔE. We suggest that the additional energetic cost is due to a rearrangement of the crystal lattice as charge carriers pass from surface localized, structurally distinct sub-gap polaron states to the free exciton state during up-conversion. Our interpretation is further corroborated by quantifying the impact of ligand coverage on the NC surface. These findings help inform the development of CsPbBr3 NCs for applications in optical refrigeration.