Effect of gamma irradiation on properties of the synthesized PANI-Cu nanoparticles assimilated into PS polymer for electromagnetic interference shielding application.

Conductive polymer nanocomposites for electromagnetic interference (EMI) shielding are important materials that can be combat the increasingly dangerous radiation pollution arising from electronic equipment and our surrounding environment. In this work, we have synthesized polyaniline-copper nanoparticles (PANI-Cu NPs) by the copper salt based oxidative polymerization method at room temperature and then added with different concentration (0, 1, 3 and 5 wt%) in polystyrene polymer forming PS/ PANI-Cu nanocomposites films by means of the traditional solution casting technique. The formed PANI-Cu NPs were investigated by UV/Vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and SEM/EDX elemental mapping techniques. On the other hand, the prepared PS/PANI-Cu nanocomposites films were evaluated by UV and SEM, the mechanical properties of the nanocomposites films were evaluated and showed an improvement by added PANI-Cu NPs up to 3 wt% and 50 kGy gamma exposure dose. The PS/PANI-Cu nanocomposites films were examined as electromagnetic interference shielding material. Electromagnetic shielding effectiveness of the produced nanocomposites were tested in the X-band of the radio frequency range namely from 8 to 12 GHz using the vector network analyzer (VNA) and a proper wave guide. All samples were studied before and after 50 kGy gamma-ray irradiation under the same condition of pressure and temperature. The results showed that the nanocomposites have improved shielding properties.

Trace elements in pancreatic cancer.

BACKGROUND: Pancreatic cancer (PCA) is an extremely aggressive malignant cancer with an increasing incidence and a low five-year survival rate. The main reason for this high mortality is that most patients are diagnosed with PCA at an advanced stage, missing early treatment options and opportunities. As important nutrients of the human body, trace elements play an important role in maintaining normal physiological functions. Moreover, trace elements are closely related to many diseases, including PCA. REVIEW: This review systematically summarizes the latest research progress on selenium, copper, arsenic, and manganese in PCA, elucidates their application in PCA, and provides a new reference for the prevention, diagnosis and treatment of PCA. CONCLUSION: Trace elements such as selenium, copper, arsenic and manganese are playing an important role in the risk, pathogenesis, diagnosis and treatment of PCA. Meanwhile, they have a certain inhibitory effect on PCA, the mechanism mainly includes: promoting ferroptosis, inducing apoptosis, inhibiting metastasis, and inhibiting excessive proliferation.

The impact of copper on bone metabolism.

Copper is an essential trace element for the human body. Abnormalities in copper metabolism can lead to bone defects, mainly by directly affecting the viability of osteoblasts and osteoclasts and their bone remodeling function, or indirectly regulating bone metabolism by influencing enzyme activities as cofactors. Copper ions released from biological materials can affect osteoblasts and osteoclasts, either directly or indirectly by modulating the inflammatory response, oxidative stress, and rapamycin signaling. This review presents an overview of recent progress in the impact of copper on bone metabolism. Translational potential of this article: The impact of copper on bone metabolism can provide insights into clinical application of copper-containing supplements and biomaterials.

Heterogeneous CuxO Nano-Skeletons from Waste Electronics for Enhanced Glucose Detection.

Electronic waste (e-waste) and diabetes are global challenges to modern societies. However, solving these two challenges together has been challenging until now. Herein, we propose a laser-induced transfer method to fabricate portable glucose sensors by recycling copper from e-waste. We bring up a laser-induced full-automatic fabrication method for synthesizing continuous heterogeneous CuxO (h-CuxO) nano-skeletons electrode for glucose sensing, offering rapid (< 1 min), clean, air-compatible, and continuous fabrication, applicable to a wide range of Cu-containing substrates. Leveraging this approach, h-CuxO nano-skeletons, with an inner core predominantly composed of Cu2O with lower oxygen content, juxtaposed with an outer layer rich in amorphous CuxO (a-CuxO) with higher oxygen content, are derived from discarded printed circuit boards. When employed in glucose detection, the h-CuxO nano-skeletons undergo a structural evolution process, transitioning into rigid Cu2O@CuO nano-skeletons prompted by electrochemical activation. This transformation yields exceptional glucose-sensing performance (sensitivity: 9.893 mA mM-1 cm-2; detection limit: 0.34 µM), outperforming most previously reported glucose sensors. Density functional theory analysis elucidates that the heterogeneous structure facilitates gluconolactone desorption. This glucose detection device has also been downsized to optimize its scalability and portability for convenient integration into people's everyday lives.

61Cu-PSMA-Targeted PET for Prostate Cancer: From Radiotracer Development to First-in-Human Imaging.

The demand for PET tracers that target prostate-specific membrane antigen (PSMA) continues to increase. Meeting this demand with approved 68Ga- and 18F-labeled PSMA tracers is challenging outside of major urban centers. This is because the short physical half-life of these radionuclides makes it necessary to produce them near their sites of usage. To overcome this challenge, we propose cyclotron-produced 61Cu for labeling PSMA PET tracers. 61Cu can be produced on a large scale, and its 3.33-h half-life allows shipping over considerably longer distances than possible for 68Ga and 18F. Production of true theranostic twins using 61Cu and the ß--emitter 67Cu is also feasible. Methods: PSMA-I&T (DOTAGA-(l-y)fk(sub-KuE)) and its derivative in which the DOTAGA chelator was replaced by NODAGA (NODAGA-(l-y)fk(sub-KuE)), herein reported as DOTAGA-PSMA-I&T and NODAGA-PSMA-I&T, respectively, were labeled with 61Cu and compared with [68Ga]Ga-DOTAGA-PSMA-I&T, [68Ga]Ga-NODAGA-PSMA-I&T, [68Ga]Ga-PSMA-11, and [18F]PSMA-1007. In vitro (lipophilicity, affinity, cellular uptake, and distribution) and in vivo (PET/CT, biodistribution, and stability) studies were performed in LNCaP cells and xenografts. Human dosimetry estimates were calculated for [61Cu]Cu-NODAGA-PSMA-I&T. First-in-human imaging with [61Cu]Cu-NODAGA-PSMA-I&T was performed in a patient with metastatic prostate cancer. Results: [61Cu]Cu-DOTAGA-PSMA-I&T and [61Cu]Cu-NODAGA-PSMA-I&T were synthesized with radiochemical purity of more than 97%, at an apparent molar activity of 24 MBq/nmol, without purification after labeling. In vitro, natural Cu (natCu)-DOTAGA-PSMA-I&T and natCu-NODAGA-PSMA-I&T showed high affinity for PSMA (inhibitory concentration of 50%, 11.2 ± 2.3 and 9.3 ± 1.8 nM, respectively), although lower than the reference natGa-PSMA-11 (inhibitory concentration of 50%, 2.4 ± 0.4 nM). Their cellular uptake and distribution were comparable to those of [68Ga]Ga-PSMA-11. In vivo, [61Cu]Cu-NODAGA-PSMA-I&T showed significantly lower uptake in nontargeted tissues than [61Cu]Cu-DOTAGA-PSMA-I&T and higher tumor uptake (14.0 ± 5.0 percentage injected activity per gram of tissue [%IA/g]) than [61Cu]Cu-DOTAGA-PSMA-I&T (6.06 ± 0.25 %IA/g, P = 0.0059), [68Ga]Ga-PSMA-11 (10.2 ± 1.5 %IA/g, P = 0.0972), and [18F]PSMA-1007 (9.70 ± 2.57 %IA/g, P = 0.080) at 1 h after injection. Tumor uptake was also higher for [61Cu]Cu-NODAGA-PSMA-I&T at 4 h after injection (10.7 ± 3.3 %IA/g) than for [61Cu]Cu-DOTAGA-PSMA-I&T (4.88 ± 0.63 %IA/g, P = 0.0014) and [18F]PSMA-1007 (6.28 ± 2.19 %IA/g, P = 0.0145). Tumor-to-nontumor ratios of [61Cu]Cu-NODAGA-PSMA-I&T were superior to those of [61Cu]Cu-DOTAGA-PSMA-I&T and comparable to those of [68Ga]Ga-PSMA-11 and [18F]PSMA-1007 at 1 h after injection and increased significantly between 1 and 4 h after injection in most cases. Human dosimetry estimates for [61Cu]Cu-NODAGA-PSMA-I&T were similar to the ones reported for 18F-PSMA ligands. First-in-human imaging demonstrated multifocal osseous and hepatic metastases. Conclusion: [61Cu]Cu-NODAGA-PSMA-I&T is a promising PSMA radiotracer that compares favorably with [68Ga]Ga-PSMA-11 and [18F]PSMA-1007, while allowing delayed imaging.

Enantioselective Copper-Catalyzed Sequential Hydrosilylation of Arylmethylenecyclopropanes.

Despite impressive advances in the construction of enantioenriched silacarbocycles featuring silicon-stereogenic centers via a selection of well-defined sila-synthons, the development of a more convenient and economic method with readily available starting materials is significantly less explored and remains a considerable challenge. Herein, we report the first example of copper-catalyzed sequential hydrosilylation of readily accessible methylenecyclopropanes (MCPs) and primary silanes, affording an efficient and convenient route to a wide range of chiral silacyclopentanes bearing consecutive silicon- and carbon-stereogenic centers with excellent enantio- and diastereoselectivities (generally ≥98% ee, > 25:1 dr). Mechanistic studies reveal that these reactions combine copper-catalyzed intermolecular ring-opening hydrosilylation of aryl MCPs and intramolecular asymmetric hydrosilylation of the resultant Z/E mixture of homoallylic silanes.

An in-vivo study of the safety of copper-containing intrauterine devices in 3.0 Tesla magnetic resonance imaging.

PURPOSE: The aim of this study is to prospectively evaluate whether women with copper-containing intrauterine devices (Cu-IUD), currently listed as MR conditional, can safely undergo 3.0 Tesla (3 T) magnetic resonance imaging (MRI). METHODS: 73 women, age 18-54 years old, with a Cu-IUD who were undergoing MRI for any reason were included consecutively. Pre- and post-MRI standard pelvic ultrasound examinations were completed to determine the appropriate pre- and post-MRI positioning of the Cu-IUD. Displaced IUDs were defined by IUD crossbars not in the fundal portion of the endometrial cavity, a visualized tip in the mid or lower uterus, any part of the device located in the cervical canal or outside of the endometrial canal, a fractured device, or a non-visualized IUD. Additionally, a questionnaire was completed by participants to determine the level of pre- and post-MRI pelvic pain. RESULTS: There were zero observed displaced Cu-IUDs on post-MRI pelvic ultrasounds (p = 0/70, 95% CI 0, .043). Three participants were dropped from the study due to malpositioned IUDs on pre-MRI pelvic ultrasound. Six patients reported new or worsening pelvic pain/discomfort during or after their MRI examination. CONCLUSION: Our results suggest that performing 3 T MRI using a low SAR setting does not cause displacement of Cu-IUDs, with zero out of 70 patients demonstrating IUD displacement.

Enhancing Performance and Stability of p-i-n Perovskite Solar Cells with Ag-Cu Codeposited Alloy Electrodes.

In the development of back electrodes for perovskite solar cells (PSCs), the major challenges are stability and cost. To address this, we present an innovative approach: Simultaneous evaporation of two independently controlled sources of metal materials was performed to achieve a uniform distribution of the alloy electrodes. In this study, Ag-Cu alloys (the molar ratio of Ag/Cu is 7/3) with a high-index crystal face (111) and a work function matching perovskite were prepared using a codeposition technique. These properties mitigate nonradiative carrier recombination at the interface and reduce the energy barrier for carrier migration. Consequently, compared to Ag based PSCs (22.77%), the implementation of Ag-Cu alloy (Ag/Cu is 7/3)-based PSCs resulted in a power conversion efficiency of 23.72%. In a 1500 h tracking test in ambient air, the Ag-Cu alloy (Ag/Cu is 7/3)-based PSCs maintained their initial efficiency of 86%. This can be attributed to almost no migration of elements from the Ag-Cu alloy electrode to the perovskite layer. Our work presents a vital strategy for improving the stability of PSCs and reducing the costs associated with the back electrode in PSCs.

Life cycle assessment of chemically treated and copper coated sustainable biocomposites.

The current demand for composites reinforced with renewable fibers is greater than it has ever been. In comparison to glass fibers, natural fibers yield the advantages of lesser density and cost. Although comparable specific properties exist between glass and natural fibers, the latter shows lower strength. However, with the copper coating and chemical treatment of natural fibers, the strength of the composites can be increased nowadays. The current research investigation focuses on the life cycle assessment of the raw, chemically treated, and copper coated fiber reinforced bagasse and banana composites to compare the emissions on the environment of these samples to prove their applicability. The study includes all the processes, from the extraction of fibers to the formation of composites, i.e., from cradle to gate, and detailed inventory. The ReCiPe H midpoint method has been utilized in SimaPro software to quantify the emissions. The results indicate that the maximum global warming emission is due to the energy consumption used during the manufacturing of these composites. Electricity contribution for chemically treated and copper coated composites in global warming contribution is slightly greater than that of raw composites i.e., 73.275 % in C- BG/P, 73.06 % in Cu- BG/P, 73.65 % in C- BN/P and 74.28 % in Cu- BN/P which is comparatively higher than 63.8 % in R- BG/P and 64.97 % in R- BN/P. The next major contributions come from polylactic acid for all the three samples of bagasse fiber reinforced PLA composite and banana fiber reinforced PLA composite. The raw samples also show improved fiber strength compared to chemical and copper coated samples.

Induction of necrosis symptoms by potato virus X in AGO2-silenced tomato plants associates with reduced transcript accumulation of copper chaperon for superoxide dismutase gene.

RNA silencing is a prominent antiviral defense mechanism in plants. When infected with a virus, RNA silencing-deficient plants tend to show exacerbated symptoms along with increased virus accumulation. However, how symptoms are exacerbated is little understood. Here, we investigated the role of the copper chaperon for superoxide dismutase (CCS) 1, in systemic necrosis observed in Argonaute (AGO)2-silenced tomato plants infected with potato virus X (PVX). While infection with the UK3 strain of PVX induced mosaic symptoms in tomato plants, systemic necrosis occurred when AGO2 was silenced. The CCS1 mRNA level was reduced and micro RNA398 (miR398), which potentially target CCS1, was increased in AGO2-knockdown tomato plants infected with PVX-UK3. Ectopic expression of CCS1 using recombinant PVX attenuated necrosis, suggesting that CCS1 alleviates systemic necrosis by activating superoxide dismutases to scavenge reactive oxygen species. Previous reports have indicated a decrease in the levels of CCS1 and superoxide dismutases along with an increased level of miR398 in plants infected with other viruses and viroids, and thus might represent shared regulatory mechanisms that exacerbate symptoms in these plants.

Copper exposure promotes ferroptosis of chicken (Gallus gallus) kidney cells and causes kidney injury.

PURPOSE: While copper (Cu) is essential for biological organisms, excessive Cu can be harmful. Ferroptosis is a programmed cell death pathway, but the role of ferroptosis in renal injury induced by Cu is limited. The aim of this study was to investigate the role of ferroptosis in kidney injury in chickens and the molecular mechanism by which Cu promotes renal ferroptosis. MATERIALS AND METHODS: Chicken were subjected to Cu treatment by artificially adding excess Cu to the basal diet (the Cu concentration in the diet was supplemented to 110-330 mg/kg), and the impact on kidney fibrosis, tissue structure, and ferroptosis-related molecular markers was studied. Then, the expression levels of genes and proteins related to ferroptosis, iron metabolism and ferroautophagy were detected to explore the promoting effect of Cu on ferroptosis in chicken kidney. MAIN FINDINGS: Cu treatment resulted in significant fibrosis and tissue structure damage in chicken kidneys. Molecular analysis revealed a significant upregulation of LC3Ⅱ, P62, ATG5, and NCOA4, along with a decrease in FTH1 and FTL protein levels. Additionally, crucial markers of ferroptosis, including the loss of GPX4, SLC7A11, and FSP1, and an increase in PTGS2 and ACSL4 protein levels, were observed in chicken kidneys after Cu exposure. CONCLUSION: Our study showed that dietary Cu excess caused kidney injury in brochickens and exhibited ferroptosis-related features, including lipid peroxidation, reduction of ferritin, and downregulation of FSP1 and GPX4. These results indicate that excess Cu can induce renal ferroptosis and lead to kidney injury in chickens. This study highlights the complex interplay between Cu ions and ferroptosis in the context of renal injury and provides a new perspective for understanding the mechanism of Cu-induced renal injury.

Focus on cuproptosis: Exploring new mechanisms and therapeutic application prospects of cuproptosis regulation.

Cuproptosis is a novel form of regulated cell death, which plays an important role in the physiological and pathological processes of the human body. Despite the increasing research on cuproptosis-related genes (CRGs) and their correlation with diseases, the pathogenesis of cuproptosis-related diseases remains unclear. Furthermore, there is a lack of reviews on the emerging technologies for regulating cuproptosis in disease treatment. This study delves into the copper-induced cell death mechanism, distinguishing cuproptosis from mechanisms like oxidative stress, glutathione synthesis inhibition, and ubiquitin-proteasome system inhibition. Several long-standing mysteries of diseases such as Wilson's disease and Menkes disease may be attributed to the occurrence of cuproptosis. In addition, we also review the detection indicators related to cuproptosis, providing targets for the diagnosis of cuproptosis-related diseases, and summarize the application value of cuproptosis in tumor therapy to better elucidate the impact of copper in cell death and diseases, and thus to promote the application prospects and possible strategies of cuproptosis-related substances, such as copper ion chelators, copper ion carriers, and copper nanomaterials, in disease therapy.

Copper-mediated Synthesis of N-Aryl-oxamic Acids.

The Cu-catalyzed Ullmann-Goldberg cross-coupling between aryl iodides and oxamates is shown to afford the corresponding N-aryloxamates with yields ranging from moderate to excellent, when the oxamate precursor incorporates a bulky tertiary alkyl group effectively preventing product degradation under the strongly basic reaction conditions. The final oxamic acids are then generated through the acid hydrolysis of the oxamate in high yields. These acids were then converted into urethanes using PIDA under thermal conditions or a visible-light Fe-LMCT process. While electron-deficient N-aryl oxamic acids provide urethanes with high efficiencies, electron-rich counterparts led to diminished yields due to aryl group over-oxidation induced by PIDA.

Cu-Catalyzed Enantioselective Borylative Desymmetrization of 1-Vinyl Cyclobutanols and Axial-to-Point Chirality Transfer in a Diastereoconvergent/Stereoretentive Allylation Scenery.

Cu-catalyzed asymmetric allylic borylation of 3,3'-disubstituted 1-vinylcyclobutan-1-ols renders axially chiral allylborane systems, with high asymmetric induction for both enantiomers, by precise selection of the cis or trans substrate. The enantioenriched alkylidenecyclobutanes served as chiral platform to prove the conceptually challenging transference of the axial-to-point chirality through two new stereocenters and one pseudoasymmetric carbon generated via diastereoconvergent allylation of aldehydes, without enantioselective erosion.

Metallomic analysis of brain tissues distinguishes between cases of dementia with Lewy bodies, Alzheimer's disease, and Parkinson's disease dementia.

Background: Dementia with Lewy bodies (DLB) can be difficult to distinguish from Alzheimer's disease (AD) and Parkinson's disease dementia (PDD) at different stages of its progression due to some overlaps in the clinical and neuropathological presentation of these conditions compared with DLB. Metallomic changes have already been observed in the AD and PDD brain-including widespread decreases in Cu levels and more localised alterations in Na, K, Mn, Fe, Zn, and Se. This study aimed to determine whether these metallomic changes appear in the DLB brain, and how the metallomic profile of the DLB brain appears in comparison to the AD and PDD brain. Methods: Brain tissues from ten regions of 20 DLB cases and 19 controls were obtained. The concentrations of Na, Mg, K, Ca, Zn, Fe, Mn, Cu, and Se were determined using inductively coupled plasma-mass spectrometry (ICP-MS). Case-control differences were evaluated using Mann-Whitney U tests. Results were compared with those previously obtained from AD and PDD brain tissue, and principal component analysis (PCA) plots were created to determine whether cerebral metallomic profiles could distinguish DLB from AD or PDD metallomic profiles. Results: Na was increased and Cu decreased in four and five DLB brain regions, respectively. More localised alterations in Mn, Ca, Fe, and Se were also identified. Despite similarities in Cu changes between all three diseases, PCA plots showed that DLB cases could be readily distinguished from AD cases using data from the middle temporal gyrus, primary visual cortex, and cingulate gyrus, whereas DLB and PDD cases could be clearly separated using data from the primary visual cortex alone. Conclusion: Despite shared alterations in Cu levels, the post-mortem DLB brain shows very few other similarities with the metallomic profile of the AD or PDD brain. These findings suggest that while Cu deficiencies appear common to all three conditions, metal alterations otherwise differ between DLB and PDD/AD. These findings can contribute to our understanding of the underlying pathogenesis of these three diseases; if these changes can be observed in the living human brain, they may also contribute to the differential diagnosis of DLB from AD and/or PDD.

Numerical examination of expanding the effectiveness of thermal photovoltaic framework by changing the level of heat transfer conveyance.

In photovoltaic systems, only a tiny portion of solar radiation reaches the module's surface and is converted to electrical energy. The remaining solar radiation is wasted, which raises cell temperature and reduces electrical efficiency. This research focused on examining the effects of different factors on nanofluids. In the simulations performed in this thesis, the inlet temperature of the water fluid changes from 5 °C to 30 °C. The radiation intensity equals 600 W per square meter, and the input speed is 0.07452 m per second. The innovation of this article is the use of two nanofluids of aluminum oxide and copper together with a mixture of water to investigate the effect of effective parameters on the electrical, thermal, and overall efficiency of photovoltaic systems, such as the amount of incoming radiation to the surface of the panel, the temperature of the fluid inlet in mountainous areas, the temperature of the absorber. , so that the thermal efficiency of copper and aluminum oxide is investigated and compared. As a result, copper nanofluid can increase the ratio more than aluminum oxide and pure water. There is a direct relationship between the output fluid temperature and the input temperature. With an increase in the input fluid temperature, the output temperature also increases proportionally. Increasing the inlet temperature affects the temperature of the absorber surface, which, in turn, reduces the electrical efficiency of the photovoltaic system. These changes are reduced by adding nanofluids to the photovoltaic system.Although the increase of nanoparticles causes a decrease in the temperature of the absorber plate, and this temperature decrease for copper nanofluid is 10 % higher than that of aluminum oxide and pure water until the volume fraction is reached.

High-Performance Pomegranate-Like CuF2 Cathode Derived from Spent Lithium-Ion Batteries.

With the large-scale application of lithium-ion batteries (LIBs), a huge amount of spent LIBs will be generated each year and how to realize their recycling and reuse in a clean and effective way poses a challenge to the society. In this work, using the electrolyte of spent LIBs as solvent, we in-situ fluorinate the conductive three-dimensional porous copper foam by a facile solvent-thermal method and then coating it with a cross-linked sodium alginate (SA) layer. Benefiting from the solid-electrolyte interphase (SEI) that accommodating the volume change of internal CuF2 core and SA layer that inhibiting the dissolution of CuF2, the synthesized CuF2@void@SEI@SA cathode with a pomegranate-like structure (yolk-shell) exhibits a large reversible capacity of ~535 mAh g-1 at 0.05 A g-1 and superb cycling stability. This work conforms to the development concept of green environmental protection and comprehensively realizes the unity of environmental, social and economic benefits.

Copper-Graphene Composite (CGC) Conductors: Synthesis, Microstructure, and Electrical Performance.

Improving the electrical performance of copper, the most widely used electrical conductor in the world is of vital importance to the progress of key technologies, including electric vehicles, portable devices, renewable energy, and power grids. Copper-graphene composite (CGC) stands out as the most promising candidate for high-performance electrical conductor applications. This can be attributed to the superior properties of graphene fillers embedded in CGC, including excellent electrical and thermal conductivity, corrosion resistance, and high mechanical strength. This review highlights the recent progress of CGC conductors, including their fabrication processes, electrical performances, mechanisms of copper-graphene interplay, and potential applications.

Acetylcholinesterase and butyrylcholinesterase co-immobilized on a copper containing Prussian blue modified electrode for the broad screening of insecticides.

We have developed a bienzymatic biosensor that contains acetylcholinesterase together with butyrylcholinesterase co-immobilized on the same electrode modified with a stabilized copper containing Prussian blue electrodeposited on electrodes coated with 4-aminothiophenol monolayer using diazonium chemistry and copper nanoparticles for improved sensitivity. There are organophosphorus and carbamate neurotoxic insecticides that inhibit only one of the two enzymes, e.g., pirimicarb inhibits butyrylcholinesterase at much lower concentrations than acetylcholinesterase while methomyl inhibits only acetylcholinesterase. Our system is simple and in a single measurement provides a sensitive signal for insecticides' presence based on the inhibition of the enzyme with the highest affinity for each toxic compound. The limits of detection are 50 ng/mL pirimicarb for the bienzymatic biosensor in comparison with 400 ng/mL pirimicarb for the acetylcholinesterase biosensor and 6 ng/mL methomyl for the bienzymatic biosensor, while inhibition is obtained for the butyrylcholinesterase biosensor at 700 ng/mL.

A Terbium Ion-Based Dual-Ligand Fluorescent Probe for Highly Selective and Sensitive Detection of Cu2+ Ions.

In this study, a fluorescent probe (GMP-Tb-SSA) utilizing lanthanide coordination polymer nanoparticles, GMP-Tb, as a sensing platform, and 5-sulfosalicylic acid (SSA) as a cofactor ligand was proposed for the detection of copper ions (Cu2+). GMP-Tb was synthesized by the self-assembly of guanine monophosphate (GMP) and terbium ion (Tb3+), and SSA was introduced as a sensitizer into the GMP-Tb network. Cu2+ could efficiently inhibit the electron transfer from the ligand GMP to the central ion, Tb3+, leading to a significant quench of fluorescence of Tb3+. The method is highly selective with a linear range of 0 to 21 µM and a detection limit of 300 nM. It is not interfered by metal ions, amino acids, and other species, and can be successfully applied to the detection of Cu2+ in real water samples.