Medial placement of trapezoid tunnel leads to higher reduction loss in acute acromioclavicular joint dislocation treated with anatomic coracoclavicular fixation.

Aim: To analyze the association between clavicular tunnel positioning and postoperative reduction loss in patients with acute acromioclavicular (AC) joint dislocation treated with anatomic coracoclavicular (CC) fixation using double clavicular tunnels. Methods: A retrospective review of patients with AC joint dislocation, treated with anatomic CC fixation using double clavicular tunnels, was conducted. Patients with pre-operative, immediate post-operative, and final follow-up Zanca-view X-rays were included. On each X-ray, the obtained measures included: distance from lateral border of clavicle to trapezoid and conoid tunnels, distance between tunnels, clavicle length, and CC distance of affected and un-affected sides. Loss of reduction was calculated as CC distance difference between immediate and final post-operative X-rays. Association between reduction loss and tunnel positioning was analyzed. Results: Conoid, trapezoid and tunnel ratios were 24% ± 4, 15% ± 3, and 9% ± 2, respectively. Significant reduction loss was seen in 21(45.7%) patients. Significantly higher probabilities of reduction loss were associated with trapezoid tunnels placed medial to 24 mm (30.8% vs 65.0%, OR 4.2 (IC95%: 1.2-14.4), p: 0.024) or 15% of the clavicle length (32.1% vs 66.7%, OR 4.2 (IC 95%: 1.2-14.9), p: 0.025). Conclusions: Trapezoid tunnels placed medial to 24 mm or 15% medial to clavicle length could lead to higher probabilities of significant reduction loss. These findings support the importance of clavicular tunnels' proper placement for decreasing significant reduction loss.

Anatomic coracoclavicular ligament reconstruction with triple flip-buttons leads to good functional outcomes and low reduction loss: a case series.

BACKGROUND: The management of acromioclavicular (AC) joint dislocation remains controversial. Recently, anatomic coracoclavicular (CC) fixation with a double clavicular tunnel and three flip-buttons has shown promising results. This study aimed to evaluate functional and radiological outcomes in patients with high-grade AC joint dislocation treated with anatomic CC fixation using double clavicular tunnels and three flip-buttons. METHODS: A retrospective, unicentric study was performed. The study included patients with high-grade AC joint dislocation who underwent surgery with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Demographic data were obtained from medical records. A functional evaluation using subjective shoulder value (SSV), visual analog scale (VAS), and disabilities of the arm, shoulder, and hand (DASH) questionnaires was performed, and an evaluation of preoperative and postoperative comparative Zanca view images was performed. Factors associated with functional outcomes and radiological AC reduction were analyzed. RESULTS: A total of 83 patients completed follow-up and were included in the analysis. The mean SSV, VAS, and DASH scores were 92.8, 0.8, and 6.4, respectively. Patients who had complications experienced significantly worse functional outcomes (DASH: P=0.037). Suboptimal final AC reduction was observed in nine patients (11.1%), and significantly more frequently in patients older than 40 years (P=0.031) and in surgeries performed more than 7 days after injury (P=0.034). There were two reoperations (2.4%). CONCLUSIONS: Anatomic CC fixation with a double clavicular tunnel and three flip-buttons leads to good functional outcomes, low complication rates, and high rates of optimal AC reduction. Level of Evidence: Level IV; Case series.

Clinical and anatomical outcomes of isolated coracoclavicular fixation after acromioclavicular joint injury: is it stable enough or is additional horizontal fixation necessary?

Background: Recently, an emphasis has been put on anatomical reduction of acromioclavicular (AC) joint both in vertical and hortizontal planes for management of AC joint injuries due to persisting horizontal instability. Therefore, an additional AC fixation in horizontal plane has been recommended. However, relation between horizontal AC joint instability and clinical outcomes is still controversial. This study aims to evaluate outcomes of isolated coraco-clavicular fixation using arthroscopic assisted single coraco-clavicular tunnel technique in grade III and V AC joint injuries and to investigate the correlation between anatomical and clinical outcomes. Methods: This study was conducted with 19 patients with grade III or V AC joint injury. Clinical outcomes included postoperative pain intensity and functional outcomes (Constant Score, American Shoulder and Elbow Surgeons, and Subjective Shoulder Value). Radiological evaluations were performed using radiographs and postoperative computed tomography scans. Degree of initial injury and postoperative stability both on axial and coronal planes were evaluated after radiological assessment. Correlations between anatomical and clinical outcomes were investigated using Pearson's correlation test. Results: At the final follow-up assessment, the mean pain score was 1.8 ± 1.8, mean American Shoulder and Elbow Surgeons score was 81.0 ± 15.4, mean Subjective Shoulder Value was 81.3 ± 19.6, and mean Constant Score was 86.3 ± 14.8. The mean loosening ratio and AC distance were 43.5 ± 30.6% and 4.3 ± 12.4 mm, respectively. No correlation was observed between postoperative anatomical and clinical outcomes (P > .05). Conclusion: Additional AC fixation on horizontal plane is not a prerequisite for all injuries, there is no significant association between horizontal instability and clinical outcomes and indications of an additional AC fixation needs to be determined.

[Effectiveness analysis of Endobutton plate combined with high-strength suture Nice knot fixation in the treatment of distal clavicle fractures].

OBJECTIVE: To investigate the effectiveness of Endobutton plate coracoclavicular fixation combined with fracture site high-strength suture Nice knot cerclage fixation in the treatment of distal clavicle fracture with coracoclavicular ligament injury. METHODS: The clinical data of 33 cases of distal clavicular fracture with coracoclavicular ligament injury treated by Endobutton coracoclavicular plate fixation between January 2017 and December 2020 were analyzed retrospectively. According to the fixation methods of fracture site, they were divided into two groups: the high-strength suture Nice knot fixation group (study group, 16 cases) and the transacromial Kirschner wire fixation group (control group, 17 cases). There was no significant difference between the two groups in common data such as age, gender, injury side, cause of injury, Craig type, combined injury, time from injury to operation, and preoperative visual analogue scale (VAS) score and Constant-Murley score ( P>0.05). Postoperative fracture healing and complications were observed, and the increase rate of coracoclavicular space on the affected side was calculated at last follow-up. VAS score was used to evaluate shoulder pain before operation, at 1 week, 1 month, 3 months after operation, and at last follow-up. The shoulder function was evaluated according to Constant-Murley shoulder score before operation, at 1 month, 3 months after operation, and at last follow-up. RESULTS: The operations were successfully completed in both groups without severe complications such as vascular nerve injury and coracoid fracture. In the control group, 1 case (5.9%) had slight pin tract infection and 1 case (5.9%) had Kirschner wire displacement; there was no obvious complication in the study group. The patients in both groups were followed up 9-36 months (mean, 22.9 months). The fracture healing time of the study group and the control group were (12.56±0.73) weeks and (13.59±0.87) weeks, respectively, and the difference was significant ( t=-3.661, P=0.001). At last follow-up, the increase rates of coracoclavicular space on the affected side of the study group and the control group were 8.88%±1.19% and 8.55%±1.07%, respectively, showing no significant difference ( t=0.837, P=0.409). The postoperative VAS score and Constant-Murley score of the two groups significantly improved when compared with those before operation, and the two scores gradually improved with the extension of time after operation ( P<0.05). Except that the VAS score at 1 week and 1 month after operation and the Constant-Murley score at 1 month after operation in the study group were significantly better than those in the control group ( P<0.05), there was no significant difference between the two groups at other time points after operation ( P>0.05). CONCLUSION: For oblique fracture or combined with butterfly fracture in the distal clavicle fracture with coracoclavicular ligament injury, the fracture site high-strength suture Nice knot fixation is a good supplement to the Endobutton plate coracoclavicular fixation. It can stabilize the fracture end, reduce the complications of Kirschner wire fixation, and is more conducive to fracture healing. The effectiveness is satisfactory.

[Coraco-clavicular loop and tension band suture in type II and type V distal-third clavicle fractures]. / Cerclaje coracoclavicular y banda de tensión con sutura en el tratamiento de fracturas del tercio externo de la clavícula tipos II y V.

Many surgical techniques have been used to address unstable distal third clavicle fractures. Complications and the need for hardware removal are still a concern. We propose a surgical technical using high-strength sutures to restore vertical and horizontal stability in Neer type II and Neer type V distal-third clavicle fractures. It has been used in three cases; two type V and one type II. In all cases, bone healing was achieved uneventfully and all patients resumed their pre-injury activities including sports at sixmonths postoperatively. The coraco-clavicular loop and tension band suture technique is a simple procedure that allows vertical and horizontal stabilization of the fracture. It achieves good clinical results and it may be a costeffective alternative to other techniques although a longer series and longterm followup is required to adequately assess the results.

Se han descrito diferentes técnicas quirúrgicas para el tratamiento de las fracturas inestables del tercio distal de la clavícula. Las complicaciones asociadas y la necesidad de retirar los implantes siguen siendo motivo de preocupación. Proponemos una técnica quirúrgica que utiliza suturas de alta resistencia para restaurar la estabilidad vertical y horizontal en las fracturas del tercio distal de la clavícula de tipo II y V de la clasificación de Neer. Esta técnica se ha utilizado en tres casos; dos de tipo V y uno de tipo II. En todos se obtuvo la consolidación ósea y todos reanudaron sus actividades previas a la lesión, incluyendo actividad deportiva, a los seis meses de la cirugía. La técnica de cerclaje coracoclavicular y banda de tensión con sutura es un procedimiento sencillo que permite la estabilización vertical y horizontal de la fractura. Permite obtener buenos resultados clínicos y puede ser una alternativa coste-efectiva eficaz en el tratamiento de estas lesiones aunque se requiere una serie más larga y un seguimiento a largo plazo para evaluar adecuadamente los resultados.

There is direct relationship between bone bridge length and coracoclavicular fixation resistance to failure: Biomechanical study in a porcine model.

BACKGROUND: This study aims to evaluate the relation between coracoclavicular resistance to failure and the distance between clavicular tunnels. The hypothesis is that a greater clavicular bone bridge between tunnels achieves a stronger coracoclavicular fixation. METHODS: Descriptive Laboratory Study. Thirty-six (36) coracoclavicular models were constructed utilizing porcine metatarsals. Coracoclavicular stabilizations were performed using a subcoracoid loop fixation configuration through two clavicular tunnels, tied at the clavicle's superior cortex using a locking knot. Models were randomly assigned to 1 of 3 experimental groups of variable bone bridge length between clavicular tunnels: 5 mm, 10 mm, and 15 mm. Each group had 12 models. Fixation resistance was assessed through the ultimate failure point under an axial load to failure trial. Failure patterns were documented. A one-way ANOVA test was used, and a Tukey post hoc as needed (P < 0.05). FINDINGS: Mean strength per bone bridge length: 5 mm = 312 N (Range: 182-442 N); 10 mm = 430 N (Range: 368-595 N); 15 mm = 595 N (Range: 441-978 N). The 15 mm group had a significantly higher ultimate failure point than the other two groups: 5 mm (P < 0.001) and 10 mm (P < 0.001). All fixations systematically failed by a superior cortex clavicle fracture at the midpoint between tunnels. INTERPRETATION: A direct relationship between bone bridge length and coracoclavicular resistance to failure was demonstrated, being the 15 mm length a significantly higher strength construct in a tied loop model.

Cerclaje coracoclavicular y banda de tensión con sutura en el tratamiento de fracturas del tercio externo de la clavícula tipos II y V / Coraco-clavicular loop and tension band suture in type II and type V distal-third clavicle fractures

Resumen: Se han descrito diferentes técnicas quirúrgicas para el tratamiento de las fracturas inestables del tercio distal de la clavícula. Las complicaciones asociadas y la necesidad de retirar los implantes siguen siendo motivo de preocupación. Proponemos una técnica quirúrgica que utiliza suturas de alta resistencia para restaurar la estabilidad vertical y horizontal en las fracturas del tercio distal de la clavícula de tipo II y V de la clasificación de Neer. Esta técnica se ha utilizado en tres casos; dos de tipo V y uno de tipo II. En todos se obtuvo la consolidación ósea y todos reanudaron sus actividades previas a la lesión, incluyendo actividad deportiva, a los seis meses de la cirugía. La técnica de cerclaje coracoclavicular y banda de tensión con sutura es un procedimiento sencillo que permite la estabilización vertical y horizontal de la fractura. Permite obtener buenos resultados clínicos y puede ser una alternativa coste-efectiva eficaz en el tratamiento de estas lesiones aunque se requiere una serie más larga y un seguimiento a largo plazo para evaluar adecuadamente los resultados.

Abstract: Many surgical techniques have been used to address unstable distal third clavicle fractures. Complications and the need for hardware removal are still a concern. We propose a surgical technical using high-strength sutures to restore vertical and horizontal stability in Neer type II and Neer type V distal-third clavicle fractures. It has been used in three cases; two type V and one type II. In all cases, bone healing was achieved uneventfully and all patients resumed their pre-injury activities including sports at six-months postoperatively. The coraco-clavicular loop and tension band suture technique is a simple procedure that allows vertical and horizontal stabilization of the fracture. It achieves good clinical results and it may be a cost-effective alternative to other techniques although a longer series and long-term follow-up is required to adequately assess the results.

Under Coracoid-through Clavicle Suture Fixation in Type 2 Distal Clavicle Fracture.

INTRODUCTION: Surgical management of Neer type 2 distal clavicle fractures may include tension band wiring, pre-contoured plate, hook plate or indirect fixation of coracoclavicular space by Endobutton, suture anchors, or Tightrope devices. We present our technique of suture and Mersilene tape fixation by passing them through the clavicle and under the coracoid which is a form of indirect fixation. TECHNIQUE: The fracture and the coracoid are exposed through a horizontal skin incision. The Mersilene tape and Ethibond suture are looped under the coracoid and then one limb of each is passed through the medial hole and then through the lateral hole to exit inferiorly and then tied underneath the clavicle, while the fracture is reduced. CONCLUSION: Direct fixation by means of plate has good outcomes though high complication rate. Indirect fixation by means of Endobutton and Tightrope devices has shown successful outcome with less side effects. Our method of fixation by Ethibond suture and Mersilene tape is inexpensive while having the same principles of internal fixating the clavicle to the coracoid while the fracture heals.

Surgical techniques for management of acromioclavicular joint separations: review and update for radiologists.

Imaging plays a central role in the postoperative management of acromioclavicular (AC) joint separations. There are more than 150 described techniques for the surgical management of AC joint injuries. These procedures can be categorized as varying combinations of the following basic techniques: a) soft-tissue repair, b) trans-articular AC joint fixation, c) coracoclavicular (CC) fixation, d) non-anatomic reconstruction of the CC ligaments, e) anatomic reconstruction of the CC ligaments, f) distal clavicle resection, and g) dynamic muscle transfer. The goals of this article are to describe the basic techniques for the surgical management of AC joint separations with an emphasis on technique-specific complications and postoperative imaging assessment.

Single coracoclavicular suture fixation with Mersilene tape versus hook plate in the treatment of acute type V acromioclavicular dislocation: a retrospective analysis.

BACKGROUND: Here, we compared the clinical and radiographic outcomes between coracoclavicular (CC) fixation with Mersilene tape and hook plate for acute unstable acromioclavicular (AC) joint dislocation treatment. METHODS: We enrolled 49 patients with unstable acute AC dislocation who, between January 2010 and January 2014, underwent surgery with single CC suture fixation with Mersilene tape (M group, 25 cases) or clavicle hook plate (H group, 24 cases). In M and H groups, the average age was 43.7 (range 18-72) and 42.0 (range 17-84) years, the male to female ratio of each group was 15:20 and 19:5, and the injured side left to right ratio was 12:13 and 11:13, respectively. All patients were right-handed. We retrospectively compared the operation time, complication rate, visual analog scale (VAS), University of California at Los Angeles (UCLA) shoulder rating scale, Oxford shoulder scores, and the radiographic outcomes based on reduction loss of CC distance on postoperative follow-up. RESULTS: No significant difference in patient demographics between the two groups in age (p = 0.709), gender (p = 0.217), time from injury to surgery (p = 0.863), and injured side (p = 1.000). The mean follow-up was 26.2 months (range 24-35 months). Nine cases of reduction loss (36%) and one of distal clavicle osteolysis (4%) were noted in the M group. CC distance improvement in the H group was significantly superior to that in the M group at 3 months (before hook plate removal, p < 0.001) and 12 months postoperatively (after hook plate removal, p = 0.004), while subacromial erosions were revealed in nine cases (37.5%) in the H group. No significant difference in operative time (p = 0.846), complication rate (p = 1.000), VAS (p = 0.199), mean UCLA shoulder rating scale (p = 0.353), and Oxford shoulder (p = 0.224) scores between the two groups. CONCLUSIONS: Both hook plate and Mersilene tape fixations provided temporary stabilization of acute type V AC dislocation and yielded comparable clinical outcomes. The hook plate provided better maintenance of reduction of radiographic outcomes. CC suture fixation with Mersilene tape may serve as an alternative method of stabilization which provides acceptable outcome without the need of implant removal.

Innovative use of single-incision internal fixation of distal clavicle fractures augmented with coracoclavicular stabilisation.

INTRODUCTION: The management of displaced fractures of the distal clavicle remains controversial, particularly in younger patients where there is no consensus as to which surgical intervention is best. Each surgical method has unique surgical complications and rates of persistent pain and post-traumatic arthritis. We report an innovative surgical technique using a plate fixation augmented with minimally invasive tension slide coracoclavicular fixation using a cortical tenodesis button (8.5 mm). METHODS: A single-surgeon series, comprising of eleven cases, underwent retrospective review. A low-profile pre-contoured stainless steel plate that combines locking and non-locking options was used. Secondary fixation to the coracoid, through the plate, was achieved under fluoroscopic guidance eliminating the need for arthroscopy or exposure of the coracoid. An 8.5-mm cortical button loaded with a single FiberTape is inserted with fluoroscopic navigation, flipped under the coracoid and fixed to the plate. Patients followed a standardised rehabilitation protocol and clinical review assessing time to union, complications and Oxford Shoulder Scores. RESULTS: The mean age of the patients was 40 years, 82% male. The majority were day-case admissions with a mean follow-up of 18 months. Although a single patient requested plate removal due to lateral prominance, there were no revisions for implant failure and no surgical site infections or neurovascular injuries. All patients were reviewed at a minimum of 17 weeks and were progressing to union. Mean Oxford Shoulder Score was 43 (28-48, SD 6.5). CONCLUSION: We consider this technique ideal for treating Neer type II distal clavicle fractures or fractures that have poor bone quality laterally, in which it can be difficult to achieve adequate screw fixation. The technique benefits from smaller tunnel diameter (3.7-mm spade-tip drill) and button length (8.5 mm). The procedure has a short learning curve and is both safe and time efficient. LEVEL OF EVIDENCE: IV.

Under-coracoid-around-clavicle (UCAC) loop in type II distal clavicle fractures.

In Neer type II (Robinson type 3B) fractures of the distal clavicle the medial fragment is detached from the coracoclavicular ligaments and displaced upwards, whereas the lateral fragment, which is usually small, maintains its position. Several fixation techniques have been suggested to treat this fracture. The aim of this study was to assess the outcome of patients with type II distal clavicle fractures treated with coracoclavicular suture fixation using three loops of Ethibond. This prospective study included 14 patients with Neer type II fractures treated with open reduction and coracoclavicular fixation. Ethibond sutures were passed under the coracoid and around the clavicle (UCAC loop) without making any drill holes in the proximal or distal fragments. There were 11 men and three women with a mean age of 34.57 years (29 to 41). Patients were followed for a mean of 24.64 months (14 to 31) and evaluated radiologically and clinically using the Constant score. Fracture union was obtained in 13 patients at a mean of 18.23 weeks (13 to 23) and the mean Constant score was 96.07 (91 to 100). One patient developed an asymptomatic fibrous nonunion at one year. This study suggests that open reduction and internal fixation of unstable distal clavicle fractures using UCAC loops can provide rigid fixation and lead to bony union. This technique avoids using metal hardware, preserves the acromioclavicular joint and provides adequate stability with excellent results.