Safety of anterior cervical corpectomy and fusion (ACCF) for the treatment of subaxial cervical spine injuries, a single center comparative matched analysis.

INTRODUCTION: Anterior Cervical Discectomy and Fusion (ACDF) and Anterior Cervical Corpectomy and Fusion (ACCF) are both common surgical procedures in the management of pathologies of the subaxial cervical spine. While recent reviews have demonstrated ACCF to provide better decompression results compared to ACDF, the procedure has been associated with increased surgical risks. Nonetheless, the use of ACCF in a traumatic context has been poorly described. The aim of this study was to assess the safety of ACCF as compared to the more commonly performed ACDF. METHODS: All patients undergoing ACCF or ACDF for subaxial cervical spine injuries spanning over 2 disc-spaces and 3 vertebral-levels, between 2006 and 2018, at the study center, were eligible for inclusion. Patients were matched based on age and preoperative ASIA score. RESULTS: After matching, 60 patients were included in the matched analysis, where 30 underwent ACDF and ACCF, respectively. Vertebral body injury was significantly more common in the ACCF group (p = 0.002), while traumatic disc rupture was more frequent in the ACDF group (p = 0.032). There were no statistically significant differences in the rates of surgical complications, including implant failure, wound infection, dysphagia, CSF leakage between the groups (p ≥ 0.05). The rates of revision surgeries (p > 0.999), mortality (p = 0.222), and long-term ASIA scores (p = 0.081) were also similar. CONCLUSION: Results of both unmatched and matched analyses indicate that ACCF has comparable outcomes and no additional risks compared to ACDF. It is thus a safe approach and should be considered for patients with extensive anterior column injury.

Pott's Spine Unveiled: A Comprehensive Case Report and Surgical Intervention.

This case report describes the presentation, diagnosis, and surgical management of a 61-year-old female admitted to a tertiary care hospital with a two-month history of neck pain and weakness in all four limbs. Despite the absence of a clear history of trauma, a detailed examination revealed restricted neck flexion, paraspinal muscle spasm, and neurological deficits. Contrast-enhanced MRI indicated vertebral osteomyelitis and discitis at the C5-C6 level, with a suspected infective etiology, possibly tuberculosis spondylitis. The patient underwent anterior cervical decompression, corpectomy of C5-C6, and fusion of C4-C7. Postoperative management included intravenous antibiotics, physiotherapy, and anti-tubercular treatment. The patient exhibited satisfactory recovery, and this case underscores the importance of comprehensive evaluation and prompt intervention in managing complex spinal infections.

Does the novel artificial cervical joint complex resolve the conflict between stability and mobility after anterior cervical surgery? a finite element study.

Background and objective: Our group has developed a novel artificial cervical joint complex (ACJC) as a motion preservation instrument for cervical corpectomy procedures. Through finite element analysis (FEA), this study aims to assess this prosthesis's mobility and stability in the context of physiological reconstruction of the cervical spine. Materials and methods: A finite element (FE)model of the subaxial cervical spine (C3-C7) was established and validated. ACJC arthroplasty, anterior cervical corpectomy and fusion (ACCF), and two-level cervical disc arthroplasty (CDA) were performed at C4-C6. Range of motion (ROM), intervertebral disc pressure (IDP), facet joint stress (FJS), and maximum von Mises stress on the prosthesis and vertebrae during loading were compared. Results: Compared to the intact model, the ROM in all three surgical groups demonstrated a decline, with the ACCF group exhibiting the most significant mobility loss, and the highest compensatory motion in adjacent segments. ACJC and artificial cervical disc prosthesis (ACDP) well-preserved cervical mobility. In the ACCF model, IDP and FJS in adjacent segments increased notably, whereas the index segments experienced the most significant FJS elevation in the CDA model. The ROM, IDP, and FJS in both index and adjacent segments of the ACJC model were intermediate between the other two. Stress distribution of ACCF instruments and ACJC prosthesis during the loading process was more dispersed, resulting in less impact on the adjacent vertebrae than in the CDA model. Conclusion: The biomechanical properties of the novel ACJC were comparable to the ACCF in constructing postoperative stability and equally preserved physiological mobility of the cervical spine as CDA without much impact on adjacent segments and facet joints. Thus, the novel ACJC effectively balanced postoperative stability with cervical motion preservation.

A Unique Presentation of Vertebral Body Osteochondroma of Sixth Cervical Spine Causing Myelopathic Symptoms: Management with En bloc Excision and Cervical Fusion.

Introduction: Vertebral body osteochondroma presenting with myelopathic symptoms is exceptionally rare entity of spinal osteochondroma which arises from the posterior surface of vertebral body and leading to spinal canal stenosis and cord compression. Early definitive diagnosis and subsequent successful treatment is necessary in such cases to prevent life threatening complications. Case Report: In this context, we report a case of a 20-years old female presented with mechanical neck pain, unsteady gait, giddiness with neurological deficit for the past 3 months. An MRI of the cervical spine revealed a mass growing from the posterior aspect of the C6 vertebral body and extending toward the vertebral canal, causing marked spinal cord compression. Conclusion: The following case report not only describes the rare presentations of vertebral body osteochondroma but also emphasizes on surgical management by en bloc resection of tumor and anterior cervical fusion, resulting in a favorable outcome without any recurrence.

Management Considerations for Cervical Corpectomy: Updated Indications and Future Directions.

Together, lower back and neck pain are among the leading causes of acquired disability worldwide and have experienced a marked increase over the past 25 years. Paralleled with the increasing aging population and the rise in chronic disease, this trend is only predicted to contribute to the growing global burden. In the context of cervical neck pain, this symptom is most often a manifestation of cervical degenerative disc disease (DDD). Traditionally, multilevel neck pain related to DDD that is recalcitrant to both physical and medical therapy can be treated with a procedure known as cervical corpectomy. Presently, there are many flavors of cervical corpectomy; however, the overarching goal is the removal of the pain-generating disc via the employment of the modern anterior approach. In this review, we will briefly detail the pathophysiological mechanism behind DDD, overview the development of the anterior approach, and discuss the current state of treatment options for said pathology. Furthermore, this review will also add to the current body of literature surrounding updated indications, surgical techniques, and patient outcomes related to cervical corpectomy. Finally, our discussion ends with highlighting the future direction of cervical corpectomy through the introduction of the "skip corpectomy" and distractable mesh cages.

Challenges and outcomes of upper cervical spinal tuberculosis surgery in pandemic-Case series study.

INTRODUCTION AND IMPORTANCE: Tuberculosis is a bacterial infection caused by Mycobacterium tuberculosis, primarily affecting the lungs. Conversely, the incidence of spinal tuberculosis (TB) was limited to a mere 6 % of cases of extrapulmonary tuberculosis. Upper cervical spinal TB is an exceptionally uncommon condition, with an incidence rate of approximately 0.3-1 % among all cases of spinal tuberculosis. CASE DESCRIPTION: Three patients diagnosed with upper cervical spinal tuberculosis who underwent Anterior Cervical Corpectomy Fusion (ACCF) or Occipitocervical fusion surgery were reviewed retrospectively. The data was obtained during the pandemic period in Indonesia. The patients were evaluated using pre-operative and post-operative Cobb's angles, Visual Analog Scale (VAS), Frankel scale, and Neck Pain and Disability (NPAD) scale. CLINICAL DISCUSSION: The ACCF surgery was more favourable when the compression was extended to the vertebral body; it showed good clinical and radiological outcomes. Multilevel ACCF and pathologies affecting bone quality seemed to be risk factors for material subsidence and instability. In this case, all the patients had performed ACCF surgery. The mean Cobb's angle pre-operative was 15.30, and Cobb's angle post-operative was 6.50. The mean pre-operative VAS value was 6.3, and the post-operative VAS value was 3. Compared to the post-operative scale, the pre-operative Frankel scale experienced an average increase of 2 levels. In contrast, the mean value of good post-operative NPAD is 29.3. CONCLUSION: Operative procedures on upper cervical spinal tuberculosis cases can improve patient's quality of life significantly, clinically and radiologically.

Two-level Anterior Cervical Corpectomy and Fusion versus Posterior Open-door Laminoplasty for the Treatment of Cervical Ossification of Posterior Longitudinal Ligament: A Comparison of the Clinical Impact on the Occipito-Atlantoaxial Complex.

OBJECTIVE: Both two-level anterior cervical corpectomy and fusion (t-ACCF) and posterior open-door laminoplasty (ODLP) are effective surgical procedures for the treatment of ossification of the posterior longitudinal ligament (OPLL). Previous studies have identified different effects of different surgical procedures on the upper and subaxial cervical spine (UCS, SCS), however, there are no studies on the effects of t-ACCF and ODLP on the occipito-atlantoaxial complex. Therefore, the purpose of this study is to compare the changes in sagittal parameters and range of motion (ROM) of the occipito-atlantoaxial complex in OPLL patients treated with t-ACCF and ODLP. METHODS: This was a retrospective study that included 74 patients who underwent t-ACCF or ODLP for the treatment of OPLL from January 2012 to August 2022 at our institution. Preoperative, 3-month, and 1-year postoperative cervical neutral, flexion-extension, and lateral flexion radiographs were taken. Sagittal parameters including Cobb angle of C2-7, C0-2, C0-1, C1-2, C2 slope, and the ROM were measured. The clinical outcome was assessed using the JOA, VAS, and NDI scores preoperatively and at 3 and 12 months postoperatively. Multiple linear regression was employed to identify factors influencing changes in UCS. RESULTS: In the ODLP group, the SCS (C2-7) Cobb angle was significantly reduced (12.85 ± 10.0 to 7.68 ± 11.27; p < 0.05), and the UCS (C0-2) Cobb angle was significantly compensated for at 1 year postoperatively compared with the t-ACCF group (3.05 ± 4.09 vs 0.79 ± 2.62; p < 0.01). The SCS and lateral flexion ROM of the ODLP group was better maintained than t-ACCF (14.51 ± 6.00 vs 10.72 ± 3.79; 6.87 ± 4.56 vs 3.81 ± 1.67; p < 0.01). The compensatory increase in C0-2, C0-1, and C1-2 ROM was pronounced in both groups, especially in the ODLP group. The results of multiple linear regression showed that only the surgical procedure was a significant factor influencing UCS. CONCLUSION: The loss of the SCS Cobb angle was more pronounced in ODLP relative to t-ACCF, resulting in a significant compensatory increase in UCS and atlantoaxial Cobb angle. The ROM of the UCS, atlantooccipital, and atlantoaxial joints was significantly increased in both groups, this may accelerate degenerative changes in the occipital-atlantoaxial complex, may leading to poorer outcomes in the long-term; of these, ODLP should receive more attention. In contrast, t-ACCF better maintains normal curvature of the SCS and occipito-atlantoaxial complex but loses more ROM.

[Application of self-stabilizing zero-profile three-dimensional printed artificial vertebral bodies for treatment of cervical spondylotic myelopathy].

Objective: To evaluate the safety and effectiveness of applying self-stabilizing zero-profile three-dimensional (3D) printed artificial vertebral bodies in anterior cervical corpectomy and fusion (ACCF) for cervical spondylotic myelopathy. Methods: A retrospective analysis was conducted on 37 patients diagnosed with cervical spondylotic myelopathy who underwent single-level ACCF using either self-stabilizing zero-profile 3D-printed artificial vertebral bodies ( n=15, treatment group) or conventional 3D-printed artificial vertebral bodies with titanium plates ( n=22, control group) between January 2022 and February 2023. There was no significant difference in age, gender, lesion segment, disease duration, and preoperative Japanese Orthopedic Association (JOA) score between the two groups ( P>0.05). Operation time, intraoperative bleeding volume, hospitalization costs, JOA score and improvement rate, incidence of postoperative prosthesis subsidence, and interbody fusion were recorded and compared between the two groups. Results: Compared with the control group, the treatment group had significantly shorter operation time and lower hospitalization costs ( P<0.05); there was no significant difference in intraoperative bleeding volume between the two groups ( P>0.05). All patients were followed up, with a follow-up period of 6-21 months in the treatment group (mean, 13.7 months) and 6-19 months in the control group (mean, 12.7 months). No dysphagia occurred in the treatment group, while 5 cases occurred in the control group, with a significant difference in the incidence of dysphagia between the two groups ( P<0.05). At 12 months after operation, both groups showed improvement in JOA scores compared to preoperative scores, with significant differences ( P<0.05); however, there was no significant difference in the JOA scores and improvement rate between the two groups ( P>0.05). Radiographic examinations showed the interbody fusion in both groups, and the difference in the time of interbody fusion was not significant ( P>0.05). At last follow-up, 2 cases in the treatment group and 3 cases in the control group experienced prosthesis subsidence, with no significant difference in the incidence of prosthesis subsidence ( P>0.05). There was no implant displacement or plate-screw fracture during follow-up. Conclusion: The use of self-stabilizing zero-profile 3D-printed artificial vertebral bodies in the treatment of cervical spondylotic myelopathy not only achieves similar effectiveness to 3D-printed artificial vertebral bodies, but also reduces operation time and the incidence of postoperative dysphagia.

[Treatment of cervical ossification of posterior longitudinal ligament with titanium alloy trabecular bone three-dimensional printed artificial vertebral body].

Objective: To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods: A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C 2-7Cobb angle ( P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C 2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results: The operation time and incidence of complications were significantly lower in the study group than in the control group ( P<0.05), while the difference in intraoperative blood loss between the two groups was not significant ( P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference ( t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences ( P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group ( P<0.05); but there was no significantly difference in VAS score and NDI between the two groups ( P>0.05). Imaging re-examination showed that the vertebral height and C 2-7Cobb angle of the two groups significantly increased at 3 and 12 months after operation ( P<0.05), and there was no significant difference between 3 and 12 months after operation ( P>0.05). At each time point, the vertebral height and C 2-7Cobb angle of the study group were significantly higher than those of the control group ( P<0.05), and the implant subsidence rate was significantly lower than that of the control group ( P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups ( P>0.05). Conclusion: Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.

Comparison of Three Grafting Options for Anterior Cervical Corpectomy and Fusion: A Retrospective 3-Arms Case Control Study.

BACKGROUND: Anterior cervical corpectomy and fusion achieves foraminal radicular and central medullary decompression and spinal stabilization in staged lesions. Many bone graft materials have been developed for the reconstruction of cervical lordosis and the restoration of intervertebral height after corpectomy. The PolyEtherKetoneEtherKetoneKetone (PEKEKK) is a semicrystalline thermoplastic polymer that can be reinforced with carbon fibers to create long and highly fenestrated rectangular cervical cages for corpectomy. This study aimed to evaluate the radiological outcomes of an innovative PEKEEKK cage compared with others grafting options. METHODS: Forty-five consecutive patients who underwent surgery with PEKEKK cages between 2017 and 2019 at a spine institution, were matched with 15 patients with a titanium mesh cylindrical cage (TMC) and 15 patients with a tricortical structural iliac bone graft. The restoration of vertebral height and cervical lordosis postoperatively, and subsidence of the construct were evaluated. Complications were reported. RESULTS: The minimal follow-up was 5.1±2years. A better, but nonsignificant, postoperative gain in height was observed for PEKEKK (+8.1 ± 20%) and TMC cages (+8.2 ± 16%) than for iliac crest autograft reconstruction (+2.3 ± 15%, P = 0.119). The mean subsidence at the last follow-up was greater for TMC cages (-10.2 ± 13%), but was not significant, with -6.1 ± 10% for PEKEKK cages and -4.1 ± 7% for iliac crest autografts (P = 0.223). The gain in segmental cervical lordosis was significant (P < 0.001) and remained stable in all the groups. CONCLUSIONS: Although an improvement in radiologic anatomical parameters can be achieved with all cage groups, the PEKEKK cage can be considered as a safe alternative for reducing subsidence.

A diagnostic challenge in cervical spine mass of spinal giant cell tumor mimicking tuberculosis: Case report.

INTRODUCTION AND IMPORTANCE: There were many reported cases that misdiagnosed cervical tuberculosis because cervical tuberculosis can mimic the characteristics of benign tumours. In this case report, we are reporting a case of a giant cell tumor (GCT) that was misdiagnosed with cervical tuberculosis. CASE PRESENTATION: A 24-year-old male came with a chief complaint of being unable to move his hands and feet four months before admission. Total collapse/ destruction of C3 vertebrae body. The MRI non-contrast result showed an anterior translation of VC2-3 and bilateral stenosis of the foraminal canal. The patient was suspected of cervical tuberculosis, and then the patient was planned for an Anterior Cervical Corpectomy and Fusion (ACCF). The gene X-pert MTB result is negative, and the histopathologic result showed the domination of multinucleated giant cells. The patient was reassessed with cervical GCT. The neurological function was significantly improved from Frankel B to Frankel D in the follow-up. CLINICAL DISCUSSION: Spinal GCT was imitated both clinical and radiological of the spinal tuberculosis. Gene X-pert is the definitive diagnosis in cases of tuberculosis. The histopathologic analysis and Gene X-pert should be the main tools used to evaluate a lesion miming spinal tuberculosis. CONCLUSION: With the availability of a wide range of diagnostic options, the appropriate selection of a diagnostic approach is one of the most important steps in patients with spinal tumours and mimicking lesions.

Does Preoperative Radiation Therapy Performed for Metastatic Spine Cancer at the Cervical Spine Increase Perioperative Complications of Anterior Cervical Surgery?

Background: Radiation therapy (RT) performed before anterior cervical spine surgery (ACSS) may cause fascial plane fibrosis, decreased soft-tissue vascularity, and vertebral body weakness, which could increase the risk of esophageal and major vessel injuries, wound complications, and construct subsidence. Therefore, this study aimed to evaluate whether preoperative RT performed for metastatic spine cancer (MSC) at the cervical spine increases perioperative morbidity for ACSS. Methods: Forty-nine patients who underwent ACSS for treatment of MSC at the cervical spine were retrospectively reviewed. All the patients underwent anterior cervical corpectomy via the anterior approach. Patient demographics, surgical factors, operative factors, and complications were recorded. Results of patients who were initially treated with RT before ACSS (RT group) were compared with those who did not receive RT before ACSS (non-RT group). Results: Eighteen patients (36.7%) were included in the RT group, while the remaining 31 (63.3%) were included in the non-RT group. Surgery-related factors, including operation time (p = 0.109), estimated blood loss (p = 0.246), amount of postoperative drainage (p = 0.604), number of levels operated (p = 0.207), and number of patients who underwent combined posterior fusion (p = 0.768), did not significantly differ between the 2 groups. Complication rates, including esophageal injury, dural tear, infection, wound dehiscence, and mechanical failure, did not significantly differ between the RT and non-RT groups. Early subsidence was significantly greater in the non-RT group compared to that in the RT group (p = 0.012). Conclusions: RT performed before surgery for MSC does not increase the risk of wound complication, mechanical failure, or vital structure injury during ACSS. The surgical procedural approach was not complicated by previous RT history. Therefore, surgeons can safely choose the anterior approach when the number of levels or location of MSC favors anterior surgery, and performing a posterior surgery is unnecessary due to a concern that previous RT may increase complication rates of ACSS.

Surgical tactics of two-segmental cervical degenerative diseases: risk factors retrospective assessment and preoperative planning.

Background: Currently, in the specialized literature there are no substantiated clinical and radiological indications for differentiated use of anterior cervical discectomy and fusion (ACDF) and anterior cervical corpectomy and fusion (ACCF) in the treatment of patients with two-segmental cervical degenerative diseases. The objectives of this study were to (I) identify risk factors that were associated with unsatisfactory results of two-level ACDF and one-level ACCF in the treatment of patients with cervical degenerative diseases despite current perioperative management, and (II) develop a clinical and radiological algorithm for personalized surgical tactics. Methods: We retrospectively identified risk factors for the development of unsatisfactory clinical postoperative results after two-level ACDF (n=81) and one-level ACCF (n=78), operated in the period of 2009-2019 for two-segmental cervical degenerative disease. Results: Satisfactory clinical results after two-level ACDF were noted in cases with total kyphotic deformity of less than 15°; local kyphotic deformity less than 10˚; the absence of circumferential spondylotic cervical stenosis; the absence of a myelopathic lesion at the level of the vertebral body; absence of migrating intervertebral disk (IVD) hernia more than 1/3 of the vertebral body; T1 slope vertebra less than 15°; IVD degeneration according to Suzuki A. 0-II; facet joint (FJ) degeneration according to Okamoto A. I-III; interbody height (IH) more than 2 mm. Satisfactory clinical results after single-level ACCF were registered in cases with IVD degeneration according to Suzuki A. III; FJ degeneration according to Okamoto A. IV-V; IH 3 mm or less; regardless of the cervical lordosis, the angle of local kyphotic deformity and T1 slope, the presence of circumferential spondylotic cervical stenosis, the localization of the myelopathic lesion and the distance of migration IVD herniation. Conclusions: Individual planning and differentiated implementation of ACDF and ACCF in patients with two-segmental cervical degenerative disease, taking into account a comprehensive preoperative clinical and radiological assessment, contributes to the effective elimination of existing neurological symptoms, reducing the intensity of neck pain and upper limbs pain, restoring the functional state and quality of patients' lives in the minimum 24 months postoperative period, as well as reducing the number of postoperative complications and reoperations.

Use of Recombinant Human Bone Morphogenetic Protein-2 After Anterior Cervical Corpectomy and Fusion for the Treatment of Vertebral Osteomyelitis.

OBJECTIVE: To report the operative outcomes after treating vertebral osteomyelitis patients with an anterior cervical corpectomy and fusion procedure using recombinant human bone morphogenetic protein-2 (rhBMP-2) as graft material. METHODS: A retrospective review of electronic medical records of 26 adult patients who underwent an anterior cervical corpectomy and fusion procedure for cervical osteomyelitis using rhBMP-2 at the University of Puerto Rico University District Hospital was performed. Indication, preoperative laboratory results, levels of corpectomy, preoperative American Spinal Injury Association Impairment Scale (ASIA) score, complications, fusion evaluation at 12 months, and ASIA score at 12 months were reviewed. RESULTS: For the cohort of patients, mean age was 47 ± 13 years and 65% were male. Spinal instability was present in 54%. The levels of corpectomy were: 1 level in 2 cases, 2 levels in 15 cases, 3 levels in 8 cases, and 5 levels in 1 case. Four patients had complications and, of these, 2 experienced dysphagia. The fusion rate was 100% and no reoperations were performed. An improvement in ASIA score was seen for 54% patients at 12-month follow-up. CONCLUSIONS: This study demonstrates a fusion rate of 100% with no reoperations reported. Recombinant human bone morphogenetic protein-2 could be considered and further researched as grafting material for anterior cervical corpectomy and fusion procedures in cervical osteomyelitis patients.

Delayed postoperative erosion of hypopharynx after anterior hardware extrusion: A case report.

Background: Esophageal breach or pharynx perforations are serious and potentially fatal complications of anterior cervical corpectomy/fusion (ACF). They are either recognized intraoperatively or are diagnosed within several postoperative days. Here, a 76-year-old male presented with the retropharyngeal extrusion of an anterior cervical expandable cage that occurred two years postoperatively. Case Description: A 76-year-old male with a history of an anterior corpectomy/fusion (C3-C6, corpectomy C4, C5) performed two years ago presented with persistent dysphagia for three months. Cervical X-rays showed anterior migration of the expandable cage and that was also confirmed by computed tomography (CT) scans. During intubation, the anesthesiologist observed that the cage had directly penetrated the hypopharynx. Following routine removal of the cage, ENT could not identify (using the operating microscope) any direct perforation of the esophagus or hypopharynx; presumably, the esophageal breach was small, and the esophageal wall spontaneously closed the gap following cage excision. Conclusion: Pharyngeal perforation after ACF is typically associated with significant morbidity and mortality. Stringent preoperative assessment, utilizing X-rays, magnetic resonance/CT studies, and ENT specialists to perform indirect laryngoscopy, may optimize postoperative outcomes.

Surgical management of ventrally located cervical epidural abscess: A comparative analysis between patients aged 18-64 years and ≥65 years.

Background: We aimed to compare the clinical course of patients aged 18-65 years and ≥65years who underwent anterior cervical discectomy and fusion (ACDF) or corpectomy for ventrally located CSEA. Methods: Clinical and imaging data were retrospectively collected from the institutional database between September 2005 and December 2021. Results: A total of 35 and 26 patients aged 18-64 and ≥ 65 years, respectively who were diagnosed with ventrally located CSEA were included. The overall mean age was 63.9 ± 3.2 years, with a predominance of the male sex (n = 43/61, 70.5%). Patients aged ≥65 years presented with significantly higher rates of comorbidities (10.3 ± 2.8), as indicated by the CCI, than their younger counterparts (18-64 years: 6.2 ± 2.6; p < 0.001). No differences in the surgical approach or characteristics were observed among the groups. Notably, patients aged ≥65 years had a significantly longer intensive care unit as well as overall hospital stay. In-hospital and 90-day mortality were similar across both groups. Following both types of surgery, a significant improvement was observed in the blood infection parameters and neurological status at discharge compared with the baseline measurements. Older age, higher rates of comorbidities, and higher grades of disability were significant predictors for mortality. Conclusions: Emergency surgical evacuation should be undertaken for CSEA in the presence of acute neurological deterioration regardless of the age. Factors, such as age, comorbidities, and neurological status on admission appear to be important predictors of disease outcomes. However, the risk profile of younger patients should not be underestimated.

Anterior retropharyngeal approach (ARPA) for high cervical spine.

BACKGROUND: One of the major challenges in operating on the spine lies in taking an anterior approach for the high cervical spine. In patients with a short neck, Klippel-Fiel syndrome or when the C3 vertebra is high in relation to the hyoid bone, it will be difficult to access the C3 body. The transoral route is a highly contaminated zone, and therefore, no instrumentation or grafts can be placed through it. METHOD: The anterior retropharyngeal approach (ARPA) for the high cervical spine. CONCLUSION: The anterior retropharyngeal approach is an excellent approach for the high cervical spine where instrumentation is needed. This route provides wide exposure of the C1-C3 region, avoiding the contaminated of the oral cavity.

Single- and Multilevel Corpectomy and Vertebral body replacement for treatment of spinal infections. A retrospective single-center study of 100 cases.

Background: The optimal operative approach for treating spinal infections remains a subject of debate. Corpectomy and Vertebral Body Replacement (VBR) have emerged as common modalities, yet data on their feasibility and complication profiles are limited. Methods: This retrospective single-center study examined 100 consecutive cases (2015-2022) that underwent VBR for spinal infection treatment. A comparison between Single-level-VBR and Multi-level-VBR was performed, evaluating patient profiles, revision rates, and outcomes. Results: Among 360 cases treated for spinal infections, 100 underwent VBR, located in all spinal regions. Average clinical and radiologic follow-up spanned 1.5 years. Single-level-VBR was performed in 60 cases, Two-level-VBR in 37, Three-level-VBR in 2, and Four-level-VBR in one case.Mean overall sagittal correction reached 10° (range 0-54°), varying by region. Revision surgery was required in 31 cases. Aseptic mechanical complications (8% pedicle screw loosening, 3% cage subsidence, 6% aseptic adjacent disc disease) were prominent reasons for revision. Longer posterior constructs (>4 levels) had significantly higher revision rates (p < 0.01). General complications (wound healing, hematoma) followed, along with infection relapse and adjacent disc infection (9%) and neurologic impairment (1%).Multilevel-VBR (≥2 levels) displayed no elevated cage subsidence rate compared to Single-level-VBR. Three deaths occurred (43-86 days post-op), all in the Multi-level-VBR group. Conclusion: This study, reporting the largest number of VBR cases for spinal infection treatment, affirmed VBR's effectiveness in sagittal imbalance correction. The overall survival was high, while reinfection rates matched other surgical studies. Anterior procedures have minimal implant related risks, but extended dorsal instrumentation elevates revision surgery likelihood.

Surgical strategies in the management of aggressive spinal haemangiomas: Retrospective case series with literature review and a practical treatment algorithm.

Purpose: We studied the clinico-radiological features and treatment outcomes of patients with aggressive spinal haemangiomas. Methods: We undertook a retrospective review of 24 patients with aggressive spinal haemangiomas managed at our centre from 2004 to 2016. The cohort was divided into two groups. Group1 included patients managed from 2004 to 2009 while Group 2 was those treated between 2010 and 2016. Clinicoradiological features and treatment outcomes were studied. Results: Back pain (24/24) and myelopathy (18/24) were the most common presenting complaints. Over 80% (20/24) of patients, had involvement of the thoracic spine and more than 50% (13/24) had severe spasticity, being Nurick grade 4&5 at presentation. The various treatment modalities used were laminectomy with or without instrumented posterior fusion (10/24), corpectomy with instrumented fusion (10/24) and alcohol injection alone (4/24). Patients who were treated with surgery had significant clinical improvement at follow-up in both groups. Patients who underwent alcohol injection did not have any improvement in symptoms at follow-up. There was a change in our strategy in the later part of the series from a two staged anterior and posterior approach to a single staged posterior-only approach to address vertebral body disease with preoperative angioembolization. Conclusion: Haemangiomas are benign lesions with locally aggressive behavior in some cases. Results of conservative approaches such as alcohol injection in management of these lesions are discouraging. Aggressive surgical decompression combined with preoperative adjuncts such as angioembolization with or without stabilization reduces intra operative blood loss and results in good neurological recovery even in patients with severe myelopathy.

[Development and in vivo biomechanics of goat mobile artificial lumbar spine complex].

OBJECTIVE: Mobile artificial lumbar complex (MALC) which suitable for reconstruction after subtotal lumbar resection in goats was developed,and to test stability of the complex and postoperative lumbar segmental motor function. METHODS: Eighteen male boer goats aged from 1 to 2 years old (weighted from 35 to 45 kg) were selected and divided into control group,fusion group and non-fusion group,with 6 goats in each group. According to preoperative CT scans and MRI examinations of lumbar,the goat MALC was designed and performed by 3D printed for non-fusion group. Operation was performed on three groups respectively,and only vertebral body and disc were exposed in control group. In fusion group,L4 part of vertebral body and the upper and lower complete disc tissues were removed,and the lumbar spine bone plate fixation was performed with titanium mesh bone grafting. In non-fusion group,vertebral body and disc were removed in the same way,and MALC was implanted. AP and lateral X-rays of lumbar vertebrae in goat were taken at 6 months after surgery,in order to understand whether the plant was dislocated,displaced and fractured. Biomechanical tests were performed on the specimens by mechanical instrument to measure range of motion (ROM) of L2,3,L3,4,L4,5 intervertebral space and the overall ROM of L2-5 lumbar vertebrae. RESULTS: MALC of lumbar vertebra was designed by 3D printing,and its component artificial vertebrae and upper and lower artificial end plates were manufactured. The semi-spherical structure was fabricated by precision lathe using high-crosslinked polyethylene material,and the prosthesis was assembled. Postoperative AP and lateral X-rays of lumbar vertebra at 6 months showed the implant position of implant and MALC were good without displacement and dislocation. In vitro biomechanical test of lumbar vertebrae specimens:(1) There were no statistical significance in ROM of lumbar intervertebral space flexion and extension,lateral flexion and rotation on L3,4 and L4,5,between non-fusion group and control group (P>0.05),while ROM of fusion group was significantly reduced compared with the other two groups (P<0.05). There were no significant difference in ROM of L2,3 intervertebral flexion and extension,lateral flexion and rotation between non-fusion group and control group (P>0.05),while fusion group was significantly increased compared with the other two groups (P<0.001). (2) There was no significant difference in overall lumbar ROM of L2-5 (P> 0.05). CONCLUSION: The individual MALC could restore intervertebral height of lumbar vertebra while maintaining the stability of lumbar vertebra and re-establishing motor function of lumbar space.