Effect of cortical bone thickness on shear stress and force in orthodontic miniscrew-bone interface - A finite element analysis.

Miniscrews are widely used in orthodontics as an anchorage device while aligning teeth. Shear stress in the miniscrew-bone interface is an important factor when the miniscrew makes contact with the bone. The objective of this study was to analyze the shear stress and force in the screw-bone interface for varying Cortical Bone Thickness (CBT) using Finite Element Analysis (FEA). Varying CBT of 1.09 mm (1.09CBT) and 2.66 mm (2.66CBT) with miniscrews of Ø1.2 mm, 10 mm length (T1), Ø1.2 mm, 6 mm length (T2) and Ø1.6 mm, 8 mm length (T3) were analyzed. Six Finite Element (FE) models were developed with cortical, cancellous bone, miniscrews and gingiva as a prism. A deflection of 0.1 mm was applied on the neck of the miniscrews at 0°, +30° and -30° angles. The shear stress and force in the screw-bone interface were assessed. The results showed that the CBT affects the shear stress and force in the screw-bone interface region in addition to the screw dimensions and deflection angulations. T1 screw generated lesser shear stress in 1.09CBT and 2.66CBT compared to T2 and T3 screws. Higher CBT is preferred for better primary stability in shear aspect. Clinically applied forces of 200 gms to 300 gms to an anchorage device induces shear stress in the miniscrew-bone interface region might cause stress shielding. Thus, clinicians need to consider the effect of varying CBT and the size of the miniscrews for the stability, reduced stress shielding and better anchorage during orthodontic treatment.

A Novel Two-Step Method for Converting Lumbar Cortical Screw to Pedicle Screw: A Case Report.

The cortical bone trajectory (CBT) technique has emerged as a minimally invasive approach for lumbar fusion but may result in pseudoarthrosis and hardware failure. This report presents a case of successful pedicle screw revision in a patient with previous failed L2 and L3 fusion using a novel "two-step" technique, including (1) drilling a new trajectory with Medtronic EM800N Stealth MIDAS Navigated MR8 drill system (Medtronic, Dublin, Ireland) and (2) placement of Solera 4.75 ATS (awl-tapped screws) with navigated POWEREASE™ (Medtronic), described here for the first time. This method involves utilizing neuronavigation and specialized instruments to safely place pedicle screws through the path of the old cortical screw trajectory, addressing the challenges associated with CBT hardware failure.

Direct activation of PI3K in osteoblasts and osteocytes strengthens murine bone through sex-specific actions on cortical surfaces.

Intracellular phosphoinositide 3-kinase (PI3K) signaling is activated by multiple bone-active receptors. Genetic mutations activating PI3K signaling are associated with clinical syndromes of tissue overgrowth in multiple organs, often including the skeleton. Bone formation is increased by removing the PI3K inhibitor PTEN, but the effect of direct PI3K in the osteoblast lineage has not been reported. We introduced a known gain-of-function mutation in Pik3ca, the gene encoding the p110α catalytic subunit of PI3K, in osteocytes and late osteoblasts using the dentin matrix protein-1 Cre (Dmp1Cre) mouse and assessed the skeletal phenotype. Femur shape was grossly normal, but cortical thickness was significantly greater in both male and female Dmp1Cre.Pik3caH1047R mice, leading to almost doubled bone strength at 12 weeks of age. Both sexes had smaller marrow areas from 6 weeks of age. Female mice also exhibited greater cross sectional area, which continued to increase until 24 weeks of age, resulting in a further increase in bone strength. While both male and female mice had increased endocortical mineralizing surface, only female mice had increased periosteal mineralizing surface. The bone formed in the Dmp1Cre.Pik3caH1047R mice showed no increase in intracortical remodeling nor any defect in cortical bone consolidation. In contrast, on both endocortical and periosteal surfaces, there was a greater extent of lamellar bone formation with highly organized osteocyte networks extending along the entire surface at a greater thickness than in control mice. In conclusion, direct activation of PI3Kα in cells targeted by Dmp1Cre leads to high cortical bone mass and strength with abundant lamellar cortical bone in female and male mice with no increase in intracortical remodeling. This differs from the effect of PTEN deletion in the same cells, suggesting that activating PI3Kα in osteoblasts and osteocytes may be a more suitable target to promote formation of lamellar bone.

Patients with genetic activation of an enzyme called phosphoinositide-3 kinase (PI3K) have tissue overgrowth syndromes, where parts of the body become enlarged, sometimes including the skeleton. There are two types of mutations that cause these problems: one that directly causes the PI3K enzyme to be more active, or one that removes the normal brake on PI3K signaling (called PTEN). We studied the effect of directly activating PI3K enzyme specifically in osteoblasts (the cells that form bone) and osteocytes (osteoblasts that make a network inside the bone tissue itself). We found mice with these mutations formed normally shaped bones that were very strong because the outer shell was thicker than usual. In both male and female mice, it became thicker on the inside of the shell, but in female mice it also became thicker on the outside, making the bones even stronger over time. The new bone was well-organized bone, which likely helped make the increase in bone strength so profound. This is very different to what has previously been shown in mice with the other type of mutation in their bone forming cells; those mice had a shell that contained many large holes (pores). This indicates that directly stimulating PI3K enzyme is more beneficial for bone than removing the PTEN brake.

Cortical Trajectory Versus Traditional Pedicle Screw Trajectory in Open Transforaminal Lumbar Interbody Fusion: Meta-analysis of Complications and Clinical Outcomes.

BACKGROUND: Lumbar degenerative disease imposes a substantial burden on global healthcare expenditures. Transforaminal lumbar interbody fusion (TLIF) utilizing either traditional trajectory (TT) pedicle screws or cortical bone trajectory (CT) pedicle screws have become increasingly common. This meta-analysis evaluates the outcomes and safety of open TLIF with TT compared to CT. METHODS: PubMed, Cochrane, and Google Scholar (pages 1-20) were explored until April 2024. The studied outcomes included complications, revision surgeries, operative room (OR) time, estimated blood loss (EBL), length of hospital stay (LOS), incision length, Visual Analog Scale (VAS), Oswestry Disability Index (ODI), and the Japanese Orthopedic Association (JOA) score. RESULTS: Five studies were included in this meta-analysis. A total of 770 patients undergoing TLIF were included, with 415 in the CT group and 355 in the TT group. No statistically significant differences were found in the rate of overall complications, including specific complications, the rate of revision surgeries, PROMS scores, OR time, and EBL. However, the CT group demonstrated shorter LOS (p=0.05), and shorter incision lengths (p<.001) compared to the TT group. CONCLUSION: Both TT and CT techniques in TLIF procedures demonstrated comparable rates of complications, reoperations, and PROMs. Despite similar OR times and EBL, the CT group exhibited shorter incision lengths, and shorter LOS compared to the TT group. Both cortical and traditional trajectory pedicle screws are safe and effective options for TLIF. There are potential benefits to CT such as shorter incision and LOS, although TT remains an essential tool for spinal instrumentation techniques.

Degradation of the mechanical properties of cortical bone due to long duration storage.

Understanding the behaviour and material properties of bone is critical in predicting the failure and fracture of bones in humans. To address this, mechanical tests have traditionally been conducted to characterize bone material and this has resulted in large body of literature. However, there appears to be a lack of complete information regarding the storage protocols used for bone specimens prior to conducting mechanical tests. For example, while storage methods are well described, parameters such as the time between donor death and bone retrieval, as well as time between specimen machining and testing, are seldom reported. As biological materials undergo degradation in storage after being removed from the donor, a clear understanding of this degradation behaviour would identify critical time frames in which previously stored cortical bone specimens should be tested such that they can still be considered representative of an in-vivo condition. In this paper, the results of an investigation to determine the effects of long duration storage on the measured mechanical properties of bovine cortical bone are reported. Three different storage protocols are compared; namely machined-refrigerated, machined-frozen and frozen-machined-frozen. Degradation effects are evident for both refrigerated and frozen specimens and the results demonstrate that testing bone specimens after more than one week in storage may not provide representative in-vivo properties. In addition, specimens exhibit severe degradation after six months in storage regardless of the storage protocol.

Comparative effectiveness of cortical bone trajectory screws and pedicle screws in the treatment of adjacent segment degeneration after lumbar fusion surgery: a systematic review and meta-analysis.

PURPOSE: To compare the efficacy and safety of cortical bone trajectory (CBT) screw and pedicle screw (PS) internal fixation in the treatment of adjacent segment degeneration (ASD) after lumbar fusion. METHODS: This study was registered on International Prospective Register of Systematic Reviews (PROSPERO) (ID: CRD42023484937). We searched PubMed, Embase, Web of Science, Cochrane Library, China National Knowledge Infrastructure (CNKI), Wan Fang Database, and Wei Pu Database by computer to collect controlled clinical studies on the efficacy and safety of cortical bone trajectory (CBT) screw and pedicle screw (PS) internal fixation in the treatment of adjacent segment degeneration (ASD) after lumbar fusion from database establishment to November 2023. Two researchers screened the literature, extracted data and evaluated the risk of bias of the included studies, recorded the authors, and sample size, and extracted the intraoperative blood loss, operation time, Oswestry disability index (ODI), Visual analogue scale (VAS), disc height (DH), hospital length stay and complications in each study. Meta-analysis was performed using Revman 5.4 software provided by Cochrane Library. RESULTS: A total of 6 cohort studies (CS) and 1 randomized controlled study with a total of 420 patients were included in this study, including 188 patients in the CBT group and 232 patients in the PS group. The CBT group had lower intraoperative blood loss than the PS group [mean difference (MD) = -129.38, 95% CI (-177.22, -81.55), P < 0.00001] and operation time was shorter than that of the PS group [MD = -1.42, 95% CI (-2.63, -0.20), P = 0.02]. Early postoperative back and leg pain improved more significantly in the CBT group [MD = -0.77, 95% CI (-1.35, -0.19), P = 0.01; MD = -0.24, 95% CI (-0.37, -0.10), P = 0.0005]. CONCLUSION: Compared with PS, CBT for adjacent segment degeneration after lumbar fusion has the advantages of less intraoperative blood loss, shorter operation time, and less back and leg pain in the early postoperative period.

Erythropoietin as promoter of engraftment for treatment of radius/ulnar non-union fracture in a dog: Case report.

Background: Fractures with large bone defects and non-unions are a great challenge for veterinary orthopaedists. In small dog breeds, this complication is commonly encountered in fractures of the radius and ulna due to poorer vascularisation of the distal antebrachium region. Case Description: A case of radius/ulnar non-union in a 1.5-year-old Pinscher occurring after trauma and two successive unsuccessful osteosyntheses is described. During the operative revision, after the removal of existing bone implants, the bone defect was filled with cortical autologous bone graft. Autocancellous bone mixed with erythropoietin was applied proximally and distally to the cortical autograft for stimulation of bone healing. The post-operative period was without complications. As early as the 9th post-operative week, the animal was able to bear weight on the limb, without signs of lameness, pain, and swelling. Radiologically, a very good bridging of the graft was observed. Fifteen weeks after the operative revision, the fracture was completely healed with excellent clinical outcome. Conclusion: The application of autogenous cortical bone graft and cancellous autograft mixed with erythropoietin demonstrated an excellent therapeutic effect and resulted in complete regeneration of the large bone defect over a 15-week period.

Glucocorticoids disrupt longitudinal advance of cortical bone basic multicellular units in the rabbit distal tibia.

Glucocorticoids (GCs) are the leading cause of secondary osteoporosis. The emerging perspective, derived primarily from 2D histological study of trabecular bone, is that GC-induced bone loss arises through the uncoupling of bone formation and resorption at the level of the basic multicellular units (BMUs), which carry out bone remodeling. Here we explore the impact of GCs on cortical bone remodeling in the rabbit model. Based upon the rapid reduction of bone formation and initial elevation of resorption caused by GCs, we hypothesized that the rate of advance (longitudinal erosion rate; LER) of cortical BMUs would be increased. To test this hypothesis we divided 20 female New Zealand White rabbits into four experimental groups: ovariohysterectomy (OVH), glucocorticoid (GC), OVH + GC and SHAM controls (n = 5 animals each). Ten weeks post-surgery (OVH or sham), and two weeks after the initiation of dosing (daily subcutaneous injections of 1.5 mg/kg of methylprednisolone sodium succinate in the GC-treated groups and 1 ml of saline for the others), the right tibiae were scanned in vivo using Synchrotron Radiation (SR) in-line phase contrast micro-CT at the Canadian Light Source. After an additional 2 weeks of dosing, the rabbits were euthanized and ex vivo images were collected using desktop micro-CT. The datasets were co-registered in 3D and LER was calculated as the distance traversed by BMU cutting-cones in the 14-day interval between scans. Counter to our hypothesis, LER was greatly reduced in GC-treated rabbits. Mean LER was lower in GC (4.27 µm/d; p < 0.001) and OVH + GC (4.19 µm/d; p < 0.001), while similar in OVH (40.13 µm/d; p = 0.990), compared to SHAM (40.44 µm/d). This approximately 90 % reduction in LER with GCs was also associated with an overall disruption of BMU progression, with radial expansion of the remodeling space occurring in all directions. This unexpected outcome suggests that GCs do not simply uncouple formation and resorption within cortical BMUs and highlights the value of the time-lapsed 4D approach employed.

Optimal untwisting of the orbital bandeau in unicoronal craniosynostosis correction: A finite element analysis.

BACKGROUND: Surgical correction of unicoronal craniosynostosis (UCS) is highly complex due to its asymmetric appearance. Although fronto-orbital advancement (FOA) is a versatile technique for craniosynostosis correction, harmonization of the orbital bandeau in UCS is difficult to predict. This study evaluates the biomechanics of the orbital bandeau using different patterns and varying characteristics of inner cortical bone layer osteotomies in a finite element (FE) analysis. METHOD: An FE model was created using the computed tomography (CT) scan of a 6.5-month-old male infant with a right-sided UCS. The unaffected side of the orbital bandeau was virtually mirrored, and anatomical correction of the orbital bandeau was simulated. Different combinations of osteotomy patterns, numbers, depths, and widths were examined (n = 48) and compared to an uncut model. RESULTS: Reaction forces and maximum stress values differed significantly (p < 0.01) among osteotomy patterns and between each osteotomy characteristic. Regardless of the osteotomy pattern, higher numbers of osteotomies significantly (p < 0.05) correlated with reductions in reaction force and maximum stress. An X-shaped configuration with three osteotomies deep and wide to the bone was biomechanically the most favorable model. CONCLUSION: Inner cortical bone layer osteotomy might be an effective modification to the conventional FOA approach in terms of predictable shaping of the orbital bandeau.

Medial cortical bone thickness of the tibial diaphysis in osteoarthritis is related to lower extremity alignment and tibial morphology.

BACKGROUND: The purpose of this study was to clarify (1) the differences in cortical bone thickness (CBT) of the tibial diaphysis between healthy and osteoarthritic knees and (2) the influences of the femorotibial angle (FTA) and inclination of the medial compartment of the proximal tibia (MCT) on tibial CBT. METHODS: The study assessed 60 subjects with varus knee osteoarthritis (OA) (22 males and 38 females; mean age, 74 ± 7 years) and 53 healthy elderly subjects (28 males and 25 females; mean age, 70 ± 6 years). Three-dimensional estimated CBT of the tibial diaphysis was automatically calculated for 2752-11,296 points using high-resolution measurements from CT. The standardized CBT was assessed in 24 regions by combining six heights and four areas. Additionally, the association between the CBT, each FTA, and MCT inclination was investigated. RESULTS: The OA group showed a thicker CBT in the medial areas than in the lateral areas of the proximal tibia, while the healthy group had a thicker lateral CBT. The medial-to-lateral ratio of the proximal tibia was significantly higher in the OA group than in the healthy group. The proximal-medial CBT correlated with FTA and MCT inclinations in the OA group. CONCLUSIONS: This study demonstrated that varus osteoarthritic knees showed a different trend of proximal-medial CBT with associations in FTA and MCT inclination from healthy knees, possibly due to medial load concentration.

Comparison of No Tap (two-step) and tapping robotic assisted cortical bone trajectory screw insertion.

Workflow for cortical bone trajectory (CBT) screws includes tapping line-to-line or under tapping by 1 mm. We describe a non-tapping, two-step workflow for CBT screw placement, and compare the safety profile and time savings to the Tap (three-step) workflow. Patients undergoing robotic assisted 1-3 level posterior fusion with CBT screws for degenerative conditions were identified and separated into either a No-Tap or Tap workflow. Number of total screws, screw-related complications, estimated blood loss, operative time, robotic time, and return to the operating room were collected and analyzed. There were 91 cases (458 screws) in the No-Tap and 88 cases (466 screws) in the Tap groups, with no difference in demographics, revision status, ASA grade, approach, number of levels fused or diagnosis between cohorts. Total robotic time was lower in the No-Tap (26.7 min) versus the Tap group (30.3 min, p = 0.053). There was no difference in the number of malpositioned screws identified intraoperatively (10 vs 6, p = 0.427), screws converted to freehand (3 vs 3, p = 0.699), or screws abandoned (3 vs 2, p = 1.000). No pedicle/pars fracture or fixation failure was seen in the No-Tap cohort and one in the Tap cohort (p = 1.00). No patients in either cohort were returned to OR for malpositioned screws. This study showed that the No-Tap screw insertion workflow for robot-assisted CBT reduces robotic time without increasing complications.

Osteomodulin deficiency in mice causes a specific reduction of transversal cortical bone size.

Skeletal growth, modeling and remodeling are regulated by various molecules, one of them being the recently identified osteoanabolic factor WNT1. We have previously reported that WNT1 transcriptionally activates the expression of Omd, encoding Osteomodulin (OMD), in a murine mesenchymal cell line, which potentially explained the skeletal fragility of mice with mutational WNT1 inactivation, since OMD has been shown to regulate type I collagen fibril formation in vitro. In the present study we confirmed the strong induction of Omd expression in a genome-wide expression analysis of transfected cells, and we obtained further evidence for Omd being a direct target gene of WNT1. To assess the in vivo relevance of this regulation, we crossed Omd-deficient mice with a mouse line harboring an inducible, osteoblast-specific Wnt1 transgene. After induction of Wnt1 expression for 1 or 3 weeks, the osteoanabolic potency of WNT1 was not impaired despite the Omd deficiency. Since current knowledge regarding the in vivo physiological function of OMD is limited, we next focused on skeletal phenotyping of wild-type and Omd-deficient littermates, in the absence of a Wnt1 transgene. Here we did not observe an impact of Omd deficiency on trabecular bone parameters by histomorphometry and µCT either. Importantly, however, male and female Omd-deficient mice at the ages of 12 and 24 weeks displayed a slender bone phenotype with significantly smaller long bones in the transversal dimension, while the longitudinal bone growth remained unaffected. Although mechanical testing revealed no significant changes explained by impaired bone material properties, atomic force microscopy of the femoral bone surface of Omd-deficient mice revealed moderate changes at the nanostructural level, indicating altered regulation of collagen fibril formation and aggregation. Taken together, our data demonstrate that, although OMD is dispensable for the osteoanabolic effect of WNT1, its deficiency in mice specifically modulates transversal cortical bone morphology.

We explored the physiological relevance of the protein Osteomodulin (OMD) that we previously found to be induced by the osteoanabolic molecule WNT1. While other studies have shown that OMD is involved in the regulation of collagen fibril formation in vitro, its function in vivo has not been investigated. We confirmed that OMD is directly regulated by WNT1 but surprisingly, when we bred mice lacking OMD with mice engineered to highly express WNT1, we found that the osteoanabolic effect of WNT1 was unaffected by the absence of OMD. Interestingly, mice lacking OMD did show differences in the shape of their bones, particularly in their width, despite no significant changes in bone density or length. Investigation of the bone matrix of mice lacking OMD at the nanostructural level indicated moderate differences in the organization of collagen fibrils. This study provided further insights into the effect of WNT1 on bone metabolism and highlighted a specific function of OMD in skeletal morphology.

Comparison of minimally invasive transforaminal lumbar interbody fusion and midline lumbar interbody fusion in patients with spondylolisthesis.

BACKGROUND: This study aimed to compare surgical outcomes, clinical outcomes, and complications between minimally invasive transforaminal lumbar interbody fusion (MIS TLIF) and midline lumbar interbody fusion (MIDLIF) in patients with spondylolisthesis. METHODS: This study retrospectively compared the patients who underwent MIS TLIF (n = 37) or MIDLIF (n = 50) for spinal spondylolisthesis. Data of surgical outcomes (postoperative one-year fusion rate and time to bony fusion), clinical outcomes (visual analog scale [VAS] for pain and Oswestry Disability Index [ODI] for spine function), and complications were collected and analyzed. RESULTS: There was more 2-level fusion in MIDLIF (46% vs. 24.3%, p = 0.038). The MIS TLIF and MIDLIF groups had similar one-year fusion rate and time to fusion. The MIDLIF group had significantly lower VAS at postoperative 3-months (2.2 vs. 3.1, p = 0.002) and postoperative 1-year (1.1 vs. 2.1, p = < 0.001). ODI was not significantly different. The operation time was shorter in MIDLIF (166.1 min vs. 196.2 min, p = 0.014). The facet joint violation is higher in MIS TLIF (21.6% vs. 2%, p = 0.009). The other complications were not significantly different including rate of implant removal, revision, and adjacent segment disease. CONCLUSION: In this study, postoperative VAS, operation time, and the rate of facet joint violation were significantly higher in the MIS TLIF group. Comparable outcomes were observed between MIDLIF and MIS TLIF in terms of fusion rate, time to fusion, and postoperative ODI score.

Efficacy and Safety of Cortical Bone Trajectory Screws versus Pedicle Screws in Lumbar Fusion: A Systematic Review and Meta-Analysis.

OBJECTIVE: A systematic review and meta-analysis was conducted to compare the efficacy and safety of cortical bone trajectory (CBT) screws and traditional pedicle screws in lumbar fusion. METHODS: Randomized controlled studies and cohort studies on CBT versus pedicle screws in lumbar fusion were searched in China Biology Medicine, China National Knowledge Infrastructure, Wanfang, VIP Database for Chinese Technical and Science Periodicals, PubMed, Cochrane Library, and Web of Science databases. The search period spanned from the establishment of the databases to December 2023. The Cochrane bias risk assessment tool and Newcastle-Ottawa scale were applied to assess the quality of the literature included. Clinical and imaging data as well as surgical outcomes, recovery, and postoperative complications were extracted from the relevant literature. RESULTS: A total of 6 randomized controlled trials and 26 cohort studies were included after screening by inclusion and exclusion criteria with a total of 2478 patients. The meta-analysis demonstrated significant discrepancies between the CBT and TPS groups in Japanese Orthopaedic Association score at 3 and 6 months and final follow-up. Moreover, the TPS group exhibited a higher Oswestry disability index at final follow-up, a greater VAS for low back pain at both 1 week and final follow-up, as well as a higher VAS for leg pain at 1 month. Differences were also noted in surgical and recovery outcomes. However, there was no significant difference between the 2 groups in postoperative complications. CONCLUSIONS: CBT and TPS have analogous safety profiles when applied to lumbar fusion, but the clinical efficacy of CBT is superior to that of TPS to some extent, and the procedure is less invasive with faster recovery.

Immediate implant placement in a dialysis patient. A case report.

Implant-supported rehabilitation in high-risk patients poses significant challenges for the dental team. The presence of comorbidities and increased infection risk can, for example, lead to a higher risk of implant loss. For the therapy to be completed with as few complications as possible, special anamnesis, detailed diagnostics, and a risk analysis based on those findings are indispensable. The aim of all considerations is to keep the risk of infection for the patient with a disease history to a minimum and to strive for an appropriate functional and esthetic therapeutic success. Particularly in the esthetic zone, in addition to the general health risks of the surgical procedure, esthetic aspects are increasingly taken into account in planning. The present article describes the implant-prosthetic replacement of a single anterior tooth in a dialysis patient. Several aspects (regular dialysis, missing buccal lamella, high smile line, functional risk) increased the risk of complications in this case.

Giant Cells, Giant Impact: A Case of Aggressive Central Giant Cell Granuloma in the Mandible.

Central giant cell granuloma (CGCG) is a bone lesion characterized by fibrous tissue containing areas of bleeding, giant cells with multiple nuclei, and trabeculae of woven bone. It is considered to be a local bone repair response, possibly triggered by inflammation, bleeding, or local injury. CGCG is more prevalent in females and can occur across a wide age range, typically diagnosed at a young age. Mandibular involvement is more common than maxillary involvement, with most lesions in the posterior region often extending into the ascending ramus. Management of aggressive CGCG can involve non-surgical (medical) and surgical treatment modalities. Surgical approaches vary from simple curettage to en bloc resection depending on various factors discussed in this case report.

Fracture behavior of human cortical bone with high glycation content under dynamic loading.

The present study simulates the fracture behavior of diabetic cortical bone with high levels of advanced glycation end-products (AGEs) under dynamic loading. We consider that the increased AGEs in diabetic cortical bone degrade the materials heterogeneity of cortical bone through a reduction in critical energy release rates of the microstructural features. To simulate the initiation and propagation of cracks, we implement a phase field fracture framework on 2D models of human tibia cortical microstructure. The simulations show that the mismatch between the fracture properties (e.g., critical energy release rate) of osteons and interstitial tissue due to high AGEs contents can change crack growth trajectories. The results show crack branching in the cortical microstructure under dynamic loading is affected by the mismatches related to AGEs. In addition, we observe cortical features such as osteons and cement lines can prevent multiple cracking under dynamic loading even with changing the mismatches due to high AGEs. Furthermore, under dynamic loading, some toughening mechanisms can be activated and deactivated with different AGEs contents. In conclusion, the current findings present that the combination of the loading type and materials heterogeneity of microstructural features can change the fracture response of diabetic cortical bone and its fragility.

Cortical and Trabecular Bone Modeling and Implications for Bone Functional Adaptation in the Mammalian Tibia.

Bone modeling involves the addition of bone material through osteoblast-mediated deposition or the removal of bone material via osteoclast-mediated resorption in response to perceived changes in loads by osteocytes. This process is characterized by the independent occurrence of deposition and resorption, which can take place simultaneously at different locations within the bone due to variations in stress levels across its different regions. The principle of bone functional adaptation states that cortical and trabecular bone tissues will respond to mechanical stimuli by adjusting (i.e., bone modeling) their morphology and architecture to mechanically improve their mechanical function in line with the habitual in vivo loading direction. This principle is relevant to various research areas, such as the development of improved orthopedic implants, preventative medicine for osteopenic elderly patients, and the investigation of locomotion behavior in extinct species. In the present review, the mammalian tibia is used as an example to explore cortical and trabecular bone modeling and to examine its implications for the functional adaptation of bones. Following a short introduction and an exposition on characteristics of mechanical stimuli that influence bone modeling, a detailed critical appraisal of the literature on cortical and trabecular bone modeling and bone functional adaptation is given. By synthesizing key findings from studies involving small mammals (rodents), large mammals, and humans, it is shown that examining both cortical and trabecular bone structures is essential for understanding bone functional adaptation. A combined approach can provide a more comprehensive understanding of this significant physiological phenomenon, as each structure contributes uniquely to the phenomenon.

Radiation Exposure During Lumbar Interbody Fusion Surgery Can Be Reduced by Using a Three-Dimensional Patient-Specific Template Guide.

BACKGROUND: The use of posterior lumber interbody fusion (PLIF) using cortical bone trajectory (CBT) with a patient-specific 3D template guide is increasingly widespread. To our knowledge, no studies have extensively evaluated the reduction of radiation exposure when using patient-specific drill template guides. The purpose of this study is to compare the intra-operative radiation dose and surgeon's exposure to radiation in CBT-PLIF when using a patient-specific drill guide with that in traditional minimally invasive (MIS)-PLIF. METHODS: In this observational study, we retrospectively compared data from five patients who were treated with single-level CBT-PLIF using a patient-specific drill guide (G group) and five patients who were treated with single-level traditional MIS-PLIF (M group). We compared the surgical time, surgeon's exposure to radiation, and intra-operative radiation time and dose between the two groups of patients. RESULTS: The mean age of the patients was 67.0 years in the M group and 74.2 years in the G group. The average surgical time was 242.8 min in the M group and 189.6 min in the G group (p = 0.020). The surgeon's exposure to radiation was 373.7 µSv in the M group and 81.75 µSv in the G group at chest level outside the protector (p = 0.00092); 42.0 µSv (M group) and 3.6 µSv (G group) at chest level inside the protector (p = 0.0000062); and 4.33 µSv (M group) and 1.20 µSv (G group) at the buttocks of the surgeon (p = 0.0013). Radiation time was 269.8 s (M group) and 56.6 s (G group) (p = 0.0097), and radiation dose was 153.7 mGy (M group) and 30.42 mGy (G group) (p = 0.00057). CONCLUSION: The patient-specific drill template guide is an invaluable tool that facilitates the safe insertion of CBT screws with a low radiation dose from the outset.

Bone collagen tensile properties of the aging human proximal femur.

Despite the dominant role of bone mass in osteoporotic fractures, aging bone tissue properties must be thoroughly understood to improve osteoporosis management. In this context, collagen content and integrity are considered important factors, although limited research has been conducted on the tensile behavior of demineralized compact bone in relation to its porosity and elastic properties in the native mineralized state. Therefore, this study aims (i) at examining the age-dependency of mineralized bone and collagen micromechanical properties; (ii) to test whether, and if so to which extent, collagen properties contribute to mineralized bone mechanical properties. Two cylindrical cortical bone samples from fresh frozen human anatomic donor material were extracted from 80 proximal diaphyseal sections from a cohort of 24 female and 19 male donors (57 to 96 years at death). One sample per section was tested in uniaxial tension under hydrated conditions. First, the native sample was tested elastically (0.25 % strain), and after demineralization, up to failure. Morphology and composition of the second specimen was assessed using micro-computed tomography, Raman spectroscopy, and gravimetric methods. Simple and multiple linear regression were employed to relate morphological, compositional, and mechanical variables with age and sex. Macro-tensile properties revealed that only elastic modulus of native samples was age dependent whereas apparent elastic modulus was sex dependent (p < 0.01). Compositional and morphological analysis detected a weak but significant age and sex dependency of relative mineral weight (r = -0.24, p < 0.05) and collagen disorder ratio (I∼1670/I∼1640, r = 0.25, p < 0.05) and a strong sex dependency of bone volume fraction while generally showing consistent results in mineral content assessment. Young's modulus of demineralized bone was significantly related to tissue mineral density and Young's modulus of native bone. The results indicate that mechanical properties of the organic phase, that include collagen and non-collagenous proteins, are independent of donor age. The observed reduction in relative mineral weight and corresponding overall stiffer response of the collagen network may be caused by a reduced number of mineral-collagen connections and a lack of extrafibrillar and intrafibrillar mineralization that induces a loss of waviness and a collagen fiber pre-stretch.