Copy Number Variations of Plasmodium vivax DBP1, EBP/DBP2, and RBP2b in Duffy-positive and Duffy-negative Ethiopians.

Recent evidence challenges the belief that Duffy-negative individuals are resistant to Plasmodium vivax due to lacking Duffy Antigen Receptor for Chemokines (DARC). Erythrocyte Binding Protein (EBP/DBP2) has shown moderate binding to Duffy-negative erythrocytes in vitro. Reticulocyte Binding Protein 2b (RBP2b) interactions with Transferrin Receptor 1 (TfR1) suggest involvement in Duffy-negative infections. Gene copy number variations (CNVs) in PvDBP1, PvEBP/DBP2, and PvRBP2b were investigated in Duffy-positive and Duffy-negative P. vivax-infected individuals from Ethiopia. Among Duffy-positive samples, 34% displayed PvDBP1 duplications (Cambodian-type). In Duffy-negative infections, 30% showed duplications, mostly Cambodian-type. For PvEBP/DBP2 and PvRBP2b, Duffy-positive samples exhibited higher duplication rates (1-8 copies for PvEBP/DBP2, 1-5 copies for PvRBP2b 46% and 43% respectively) compared to Duffy-negatives (20.8% and 26% respectively). The range of CNVs was lower in Duffy-negative infections. Demographic and clinical factors associated with gene multiplications in both Duffy types were explored, enhancing understanding of P. vivax evolution in Duffy-negative Africans.

Indicator displacement-based colorimetric assay for dibutyl phthalate in pharmaceutical products with titanium(IV)-pyridylazo resorcinol (PAR).

Taking advantage of the competitive binding affinity towards Ti(IV) between 4-(2-pyridylazo) resorcinol (PAR) and phthalate, a simple indicator displacement (ID)-based colorimetric assay was designed for indirect determination of a well-known phthalic acid ester, dibutyl phthalate (DBP). The indicator PAR and Ti(IV) formed a purplish-red-colored Ti(IV)-PAR complex (λmax = 540 nm) at a 1:1 ratio. In the presence of pre-hydrolyzed DBP, colorless complex formation of phthalate ion (emerging from alkaline hydrolysis of DBP) with Ti(IV) resulted in a hypsochromic shift in absorbance maximum, accompanying a color change from purplish-red to yellowish-orange (λmax = 390 nm) by the release of PAR from Ti(IV)-PAR system. Based on this mechanism, the linear response range of the system for DBP was found to lie between 0.16 and 0.37 mmol L-1 with an experimental detection limit of 11.6 µmol L-1. The recommended Ti(IV)-PAR system was successfully applied to DBP-containing pharmaceutical products (as real sample) after a simple clean-up process for removing possible water-soluble interferents. The analytical results obtained from the recommended method (by applying the standard addition approach) and the reference liquid chromatography-tandem mass spectrometric (LC-MS/MS) method were statistically compared using DBP-extract of the drug samples. Consequently, a simple and selective colorimetric ID strategy was proposed for the analysis of DBP in pharmaceuticals for the first time.

The Characteristics of Adsorption of Di-n-Butyl Phthalate by Surface Sediment from the Three Gorges Reservoir.

Phthalic acid esters (PAEs), recognized as endocrine disruptors, are identified as predominant organic pollutants in the Three Gorges Reservoir (TGR). Di-n-butyl phthalate (DBP), a representative PAE, has been extensively studied for its sources, distribution and ecological risks. However, there are few studies on the adsorption of DBP by sediment from the TGR, and the adsorption characteristics of surface sediment on DBP are not clear. Therefore, based on the actual sediment contents and particle sizes in the TGR, the kinetics and isothermal adsorption characteristics of surface sediment on DBP were investigated in this study. The results showed that the equilibrium time was 120 min, the adsorption kinetics were more in line with the pseudo-second-order kinetic model, and the sediment in water from the Yangtze River exhibited a higher adsorption rate and maximum adsorption amount on DBP than that observed in deionized water. Additionally, a decrease in DBP adsorption was observed with increasing sediment content, while sediment particle size and specific surface area had a slight influence. Analysis using SEM, TGA and FTIR revealed that organic matter on the sediment surface significantly contributed to DBP adsorption. This study contributes valuable insights into the adsorption characteristics of DBP by the surface sediment from the TGR, providing a scientific foundation for understanding the migration and transformation of DBP in this critical reservoir in China.

The impact of PAC-loaded polymer membrane thickness on chloroform removal and comparison of solvent and thermal membrane regeneration methods.

Powdered activated carbon (PAC) has better adsorption performance than granular activated carbon (GAC) and is widely used in water purification. In most cases, PAC is dosed into water directly, then precipitated as sludge, and landfilled. In this study, PAC was mixed with a polymer and dissolved in dimethylformamide (DMF) solvent to form a PAC-loaded membrane, which was then tested for chloroform removal. The chloroform adsorption capacity of the PAC membrane increased with increasing membrane thickness because of higher carbon loading. However, regardless of membrane thickness, the flux of the PAC membranes was similar since flux resistance predominantly occurred at the top dense polymer surface. This dense surface can be removed by sandpaper polishing, where the adsorption capacity of the polished PAC membranes was 20% higher than the unpolished membranes because of more even distribution of feed water on the polished surface. Removal of the dense surface via polishing increased the flux by 97% to 130%, exceeding the flux of typical household carbon block filters. Using DMF to regenerate the membrane recovered 48% to 66% of the initial adsorption capacity. Thermal regeneration of the exhausted PAC membrane at 250°C was more effective than DMF regeneration (both in terms of cost and performance), with 83% to 94% PAC membrane regeneration efficiency over four regeneration recycles. After four thermal regeneration cycles, flux increased by 300% and the membrane became brittle because of thermal aging of the polymer, indicating that a total of 6 h of regeneration time (equivalent to three cycles in this study) was the limit for effective PAC membrane performance. PRACTITIONER POINTS: Powdered activated carbon was immobilized on a membrane to remove chloroform from water. Thicker membranes increased adsorption capacity but did not impact flux. Flux and capacity increased using polishing to remove the dense polymer surface and more evenly distribute flow across the membrane. Thermal regeneration of the membrane at 250°C was effective for up to three cycles and outperformed solvent-based regeneration. PAC-loaded filters are relevant for applications such as household carbon block filtration.

An Improved Helper Plasmid Containing Deletions Within the E4 and E2a Genes Results in Increased Adeno-Associated Virus Productivity.

The use of a helper plasmid to replace adenovirus infection for adeno-associated virus (AAV) manufacturing has been common practice for decades. Adenovirus E4, E2a, and VA RNA genes are sufficient to support efficient AAV replication. In an effort to ensure that all transfected DNA has a functional role in AAV production, deletions were introduced to the E4 and E2a genes to determine if any portions were dispensable. Although a 900 bp deletion in the E2a intron did not have an impact, the removal of open reading frames (orf) 1-4 from the E4 gene resulted in a doubling of AAV productivity. The E4Δorf1-4 deletion was associated with a reduction in E4orf6 transcripts, along with an increase in Rep and Cap transcripts and protein levels, which corresponded to increased AAV productivity in crude lysate. The final product of these studies was a helper plasmid, termed OXB-Helper_3, that is >3.4 kb smaller than the original control plasmid and resulted in ∼2× improvement in vector genome productivity across multiple capsid serotypes, genome designs, and transfection platforms.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning.

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Evaluation of electrokinetic-assisted phytoremediation efficiency of dibutyl phthalate contaminated soil by maize (Zea mays L.) under different electric field intensities.

The excessive accumulation of dibutyl phthalate (DBP) in soil poses a serious threat to soil ecosystems and crop safety production. Electrokinetic-assisted phytoremediation (EKPR) has been considered as a potential technology for remediating organic contaminated soils. In order to investigate the effect of different electric fields on removal efficiency of DBP, three kinds of electric fields were set up in this study (1 V·cm-1, 2 V·cm-1 and 3 V·cm-1). The results showed that 59 % of DBP in soil was removed by maize (Zea mays L.) within 20 d in low-intensity electric field (1 V·cm-1), and the accumulation of DBP in maize tissues decreased significantly compared to the non-electrified treatment group. Interestingly, it could be observed that the low-intensity electric field could maintain ion homeostasis and improve the photosynthetic efficiency of the plant, thereby relieving the inhibition of DBP on plant growth and increasing the chlorophyll content (94.1 %) of maize. However, the removal efficiency of DBP by maize decreased significantly under the medium-intensity (2 V·cm-1) and high-intensity electric field (3 V·cm-1). Moreover, the important roles of soil enzyme and rhizosphere bacterial community in low-electric field were also investigated and discussed. This study provided a new perspective for exploring the mechanism of removing DBP through EKPR.

Disinfection by-product formation potential in response to variability in dissolved organic matter and nutrient inputs: Insights from a mesocosm study.

Changes in rainfall patterns driven by climate change affect the transport of dissolved organic matter (DOM) and nutrients through runoff to freshwater systems. This presents challenges for drinking water providers. DOM, which is a heterogeneous mix of organic molecules, serves as a critical precursor for disinfection by-products (DBPs) which are associated with adverse health effects. Predicting DBP formation is complex due to changes in DOM concentration and composition in source waters, intensified by altered rainfall frequency and intensity. We employed a novel mesocosm approach to investigate the response of DBP precursors to variability in DOM composition and inorganic nutrients, such as nitrogen and phosphorus, export to lakes. Three distinct pulse event scenarios, mimicking extreme, intermittent, and continuous runoff were studied. Simultaneous experiments were conducted at two boreal lakes with distinct DOM composition, as reflected in their color (brown and clear lakes), and bromide content, using standardized methods. Results showed primarily site-specific changes in DBP precursors, some heavily influenced by runoff variability. Intermittent and daily pulse events in the clear-water mesocosms exhibited higher haloacetonitriles (HANs) formation potential linked to freshly produced protein-like DOM enhanced by light availability. In contrast, trihalomethanes (THMs), associated with humic-like DOM, showed no significant differences between pulse events in the brown-water mesocosms. Elevated bromide concentration in the clear mesocosms critically influenced THMs speciation and concentrations. These findings contribute to understanding how changing precipitation patterns impact the dynamics of DBP formation, thereby offering insights for monitoring the mobilization and alterations of DBP precursors within catchment areas and lake ecosystems.

Structure-dependent degradation of phthalate esters with persulfate oxidation activated by thermal in soil.

Phthalate esters (PAEs) have become one of the most concerned emerging organic pollutants in the world, due to the toxicity to human health, and hard to remove it efficiently. In this study, the degradation performance of DBP and DEHP in the soil by water bath heating activated sodium persulfate (PS) method under different factors were studied, in which the degradation rate of DBP and DEHP were improved with the increasing of temperature, PS concentration and water/soil ratio, and higher diffusion efficiency treatments methods, due to the improved mass transfer from organic phase to aqueous media. However, the degradation rate of DEHP was much lower than that of DBP, because DEHP in the soil was more difficult to contact with SO4•- for reaction on soil surface, and the degradation rate of PAEs in soil was significantly lower than that in water. Redundancy analysis of degradation rate of DBP and DEHP in water demonstrated that the key factors that determine the degradation rate is time for DBP, and cosolvent dosage for DEHP, indicating that the solubility and diffusion rate of PAEs from soil to aqueous are predominance function. This study provides comprehensive scenes in PAEs degradation with persulfate oxidation activated by thermal in soil, reveal the difference of degradation between DBP and DEHP is structure-dependent. So that we provide fundamental understanding and theoretical operation for subsequent filed treatment of various structural emerging pollutants PAEs contaminated soil with thermal activated persulfate.

Exploring the genetic diversity pattern of PvEBP/DBP2: A promising candidate for an effective Plasmodium vivax vaccine.

Malaria remains a public health challenge. Since many control strategies have proven ineffective in eradicating this disease, new strategies are required, among which the design of a multivalent vaccine stands out. However, the effectiveness of this strategy has been hindered, among other reasons, by the genetic diversity observed in parasite antigens. In Plasmodium vivax, the Erythrocyte Binding Protein (PvEBP, also known as DBP2) is an alternate ligand to Duffy Binding Protein (DBP); given its structural resemblance to DBP, EBP/DBP2 is proposed as a promising antigen for inclusion in vaccine design. However, the extent of genetic diversity within the locus encoding this protein has not been comprehensively assessed. Thus, this study aimed to characterize the genetic diversity of the locus encoding the P. vivax EBP/DBP2 protein and to determine the evolutionary mechanisms modulating this diversity. Several intrapopulation genetic variation parameters were estimated using 36 gene sequences of PvEBP/DBP2 from Colombian P. vivax clinical isolates and 186 sequences available in databases. The study then evaluated the worldwide genetic structure and the evolutionary forces that may influence the observed patterns of genetic variation. It was found that the PvEBP/DBP2 gene exhibits one of the lowest levels of genetic diversity compared to other vaccine-candidate antigens. Four major haplotypes were shared worldwide. Analysis of the protein's 3D structure and epitope prediction identified five regions with potential antigenic properties. The results suggest that the PvEBP/DBP2 protein possesses ideal characteristics to be considered when designing a multivalent effective antimalarial vaccine against P. vivax.

Neurotoxicity of dibutyl phthalate in zebrafish larvae: Decreased energy acquisition by neurons.

This work was designed to investigate the neurotoxic effects of the typical plasticizer dibutyl phthalate (DBP) using zebrafish larvae as a model. The results of exhibited that zebrafish larvae exposed to DBP at concentrations of 5 µg/L and 10 µg/L exhibited brain malformations (24 h) and behavioral abnormalities (72 h). After 72 h of exposure to DBP, microglia in the brain were over-activated, reactive oxygen species (ROS) formation was increased, and apoptosis was observed. Meanwhile, it was found that neurons exhibited impaired mitochondrial structure, absent mitochondrial membrane potential and up-regulated autophagy. Further comprehensive biochemical analyses and RNA-Seq, validated by RT-qPCR, glutamate metabolism and PPAR signaling pathway were significantly enriched in the DBP stress group, this may be the main reason for the disruption of glycolysis/gluconeogenesis processes and the reduction of energy substrates for the astrocyte-neuron lactate shuttle (ANLS). In addition, the DBP-exposed group showed aberrant activation of endoplasmic reticulum (ER) stress signaling pathway, which may be related to ROS as well as neuronal apoptosis and autophagy. In conclusion, DBP-induced neurotoxicity may be the combined result of insufficient neuronal energy acquisition, damage to mitochondrial structure, apoptosis and autophagy. These results provide a theoretical basis for understanding the neurotoxic effects of DBP.

Identification of sensitive endpoints for the assessment of phthalates-induced reproductive and developmental toxicity: A literature mining study.

Dibutyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP), two common types of phthalates, are known to cause reproductive and developmental toxicity in animals and humans. The reference doses (RfD) of DBP and DEHP should be determined by sensitive endpoints. We here aimed to identify sensitive endpoints for DBP- and DEHP-induced such toxicity using published literatures. By examining the impacts of maternal exposure to DBP or DEHP on anogenital distance (AGD) and semen quality of offspring, we discovered that DBP or DEHP caused AGD decline in boys but increase in girls with DBP being more potent and the first 14weeks of pregnancy being more susceptible, suggesting a chemical- and time-dependent phenomenon. We also identified AGD shortening and total sperm count reduction as two sensitive endpoints for DBP- or DEHP-induced reproductive and developmental toxicity, respectively. Based upon these two endpoints and the employment of the Bayesian benchmark dose approach with an uncertainty factor of 3,000, we estimated the RfD values of DBP and DEHP were 15 µg/kg/day and 36 µg/kg/day, respectively. Thus, we uncover previously unrecognized phenomena of DBP- or DEHP-induced reproductive and developmental toxicity and establish new and comparable or more conservative RfDs for the risk assessment of phthalates exposure in humans.

Vaccines and monoclonal antibodies: new tools for malaria control.

SUMMARYMalaria remains one of the biggest health problems in the world. While significant reductions in malaria morbidity and mortality had been achieved from 2000 to 2015, the favorable trend has stalled, rather significant increases in malaria cases are seen in multiple areas. In 2022, there were 249 million estimated cases, and 608,000 malaria-related deaths, mostly in infants and children aged under 5 years, globally. Therefore, in addition to the expansion of existing anti-malarial control measures, it is critical to develop new tools, such as vaccines and monoclonal antibodies (mAbs), to fight malaria. In the last 2 years, the first and second malaria vaccines, both targeting Plasmodium falciparum circumsporozoite proteins (PfCSP), have been recommended by the World Health Organization to prevent P. falciparum malaria in children living in moderate to high transmission areas. While the approval of the two malaria vaccines is a considerable milestone in vaccine development, they have much room for improvement in efficacy and durability. In addition to the two approved vaccines, recent clinical trials with mAbs against PfCSP, blood-stage vaccines against P. falciparum or P. vivax, and transmission-blocking vaccine or mAb against P. falciparum have shown promising results. This review summarizes the development of the anti-PfCSP vaccines and mAbs, and recent topics in the blood- and transmission-blocking-stage vaccine candidates and mAbs. We further discuss issues of the current vaccines and the directions for the development of next-generation vaccines.

Association of Pre-PCI Blood Pressure and No-Reflow in Patients with Acute ST-Elevation Coronary Infarction.

Background: Previous studies have established blood pressure (BP) as a pivotal factor influencing no-reflow following primary percutaneous coronary intervention (PCI) in patients with ST-elevation acute coronary infarction (STEMI). However, no relevant study has been conducted to investigate the optimal range of BP associated with the lowest risk of no-reflow among STEMI patients so far. Therefore, our objective was to evaluate the association between pre-PCI BP and the occurrence of no-reflow in patients with STEMI. Method: We included 1025 STEMI patients undergoing primary PCI. The BP pre-PCI was categorized into 20-mmHg increments. Logistic models were employed to assess the association of no-reflow with systolic blood pressure (SBP) or diastolic blood pressure (DBP). Three sensitivity analyses were conducted to further confirm the robustness of the association between blood pressure and no-reflow. Results: SBP or DBP exhibited a U-shaped curve association with no-reflow. No-reflow was higher in patients with lower SBP (<100 mmHg) (adjusted hazard ratio (OR) 3.64, 95% confidence interval (CI) 1.84,7.21; p < 0.001) and lower DBP (<60 mmHg) (OR 3.28, 95% CI 1.63,6.49; p < 0.001) [reference: 120 ≤SBP <140; 80 ≤DBP <100 mmHg], respectively. Furthermore, no-reflow was higher in patients with higher SBP (≥160 mmHg) (OR 2.07, 95% CI 1.27,3.36; p = 0.003) and DBP (≥100 mmHg) (OR 3.36, 95% CI 2.07,5.46; p < 0.001), respectively. The results of sensitivity analyses were consistent with the above findings. Conclusion: Maintaining a pre-PCI SBP within the range of 120 to 140 mmHg and a DBP within the range of 80 to 100 mmHg may be confer benefits to patients with STEMI in no-reflow.

Combined effect of polystyrene nanoplastic and di-n-butyl phthalate on testicular health of male Swiss albino mice: analysis of sperm-related parameters and potential toxic effects.

Plastics, especially polystyrene nanoplastic particles (PSNPs), are known for their durability and absorption properties, allowing them to interact with environmental pollutants such as di-n-butyl phthalate (DBP). Previous research has highlighted the potential of these particles as carriers for various pollutants, emphasizing the need to understand their environmental impact comprehensively. This study focuses on the subchronic exposure of male Swiss albino mice to PSNP and DBP, aiming to investigate their reproductive toxicity between these pollutants in mammalian models. The primary objective of this study is to examine the reproductive toxicity resulting from simultaneous exposure to PSNP and DBP in male Swiss albino mice. The study aims to analyze sperm parameters, measure antioxidant enzyme activity, and conduct histopathological and morphometric examinations of the testis. By investigating the individual and combined effects of PSNP and DBP, the study seeks to gain insights into their impact on the reproductive profile of male mice, emphasizing potential synergistic interactions between these environmental pollutants. Male Swiss albino mice were subjected to subchronic exposure (60 days) of PSNP (0.2 mg/m, 50 nm size) and DBP (900 mg/kg bw), both individually and in combination. Various parameters, including sperm parameters, antioxidant enzyme activity, histopathological changes, and morphometric characteristics of the testis, were evaluated. The Johnsen scoring system and histomorphometric parameters were employed for a comprehensive assessment of spermatogenesis and testicular structure. The study revealed non-lethal effects within the tested doses of PSNP and DBP alone and in combination, showing reductions in body weight gain and testis weight compared to the control. Individual exposures and the combination group exhibited adverse effects on sperm parameters, with the combination exposure demonstrating more severe outcomes. Structural abnormalities, including vascular congestion, Leydig cell hyperplasia, and the extensive congestion in tunica albuginea along with both ST and Leydig cell damage, were observed in the testis, underscoring the reproductive toxicity potential of PSNP and DBP. The Johnsen scoring system and histomorphometric parameters confirmed these findings, providing interconnected results aligning with observed structural abnormalities. The study concludes that simultaneous exposure to PSNP and DBP induces reproductive toxicity in male Swiss albino mice. The combination of these environmental pollutants leads to more severe disruptions in sperm parameters, testicular structure, and antioxidant defense mechanisms compared to individual exposures. The findings emphasize the importance of understanding the interactive mechanisms between different environmental pollutants and their collective impact on male reproductive health. The use of the Johnsen scoring system and histomorphometric parameters provides a comprehensive evaluation of spermatogenesis and testicular structure, contributing valuable insights to the field of environmental toxicology.

Impact of storm events on disinfection byproduct precursors in a drinking water source in the Northeastern United States.

Storm events play a crucial role in organic matter transport within watersheds and can increase the concentration and alter the composition of NOMs and DBP formation potential. To assess the impact that storm events can have on drinking water quality, samples were collected and analyzed across four storm events in the Neversink River, Catskill region, New York in 2019 and 2022. Source water natural organic matter (NOM) was characterized, and the change of NOM quality was evaluated due to storm impacts. During storm events, a high level of NOM mobilization is initiated by heavy precipitation causing overland flow and a rise in the water table. In this way, storms result in increased access to stored NOM pools that are generated during inter-storm periods. A significant correlation was observed between several organic water quality parameters such as UV absorbance (UV254), dissolved organic carbon (DOC) and chlorine demand. Precursors for the total trihalomethanes (TTHM), dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) exhibited comparable patterns with UV254, DOC, and chlorine demand for four storms. Despite the potential for increased dilution resulting from higher discharges, all organic water quality parameters, including yields of disinfection byproducts (i.e., DBP precursors), exhibited elevated concentrations during periods of higher flows. Three of the four storms showed hysteresis patterns with higher observed concentrations of organic constituents in the falling limb of the hydrographs. Precursors for the nitrogenous DBPs (N-DBPs) were proportional to the DOC for all four storms. The coefficient of determination (R2) for TTHM, DCAA, TCAA with UV254 is higher (R2 0.92-0.98) than corresponding correlations with DOC (R2 0.89-0.92). The R2 for UV254 showed the following hierarchy: DCAA≈TCAA>TTHM. Additionally, the R2 for DOC and specific ultraviolet absorbance (SUVA) had the following hierarchy: DCAA>TCAA>TTHM and TCAA>DCAA>TTHM respectively. A significant correlation between UV254 and DOC (R = 0.99) for all storms was observed. Chlorine demand also yielded a strong correlation (R = 0.91∼0.98) with UV254 and DOC. This research indicates that a significant and disproportionate export of NOM to source waters occurs during storm events compared to baseflow conditions. Consequently, it is recommended for drinking water treatment facilities to reassess chlorine dosages during these events. Treatment plants can employ UV254 as a tool to determine appropriate chlorine dosages, aiming to mitigate DBP formation in treated waters.

Disinfection by-products control in wastewater effluents treated with ozone and biological activated carbon followed by UV/Chlor(am)ine processes.

Sequential utilization of ozone (O3) and biological activated carbon (BAC) followed by UV/chlor(am)ine advanced oxidation process (AOP) has drawn attention in water reuse. However, the formation of disinfection by-products (DBPs) in this process is less evaluated. This study investigated the DBP formation and the relevant toxicity during the O3-BAC-UV/chlor(am)ine treatment of sand-filtered municipal secondary effluent. DBP formation in UV/chlorine and UV/dichloramine (NHCl2) processes were compared, where the impact of key operational parameters (e.g., UV wavelength, pH) on DBP formation were comprehensively evaluated. O3-BAC significantly reduced DBP formation potential (DBPFP) (58.2 %). Compared to UV/chlorine AOP, UV/NHCl2 AOP reduced DBP formation by 29.7 % in short-time treatment, while insignificantly impacting on DBPFP (p > 0.05). UV/NHCl2 AOP also led to lower calculated cytotoxicity (67.7 %) and genotoxicity (55.9 %) of DBPs compared to UV/chlorine AOP. Compared to 254 nm UV light, the utilization of 285 nm UV light decreased the formation of DBPs in wastewater treated with the UV/chlorine AOP and UV/NHCl2 AOP by 31.3 % and 19.2 %, respectively. However, the cytotoxicity and genotoxicity in UV/NHCl2 AOP using 285 nm UV light increased by 83.4 % and 58.5 %, respectively, compared to 254 nm. The concentration of DBPs formed in the UV/NHCl2 AOP at pH 8 was 54.3 % lower than that at pH 7, suggesting a better control of DBPs at alkaline condition. In the presence of bromide, UV/NHCl2 AOP tended to generate more brominated DBPs than UV/chlorine AOP. Overall, UV/NHCl2 AOP resulted in lower concentration and toxicity of DBPs compared to UV/chlorine AOP.

Biodegradation of phthalate acid esters and whole-genome analysis of a novel Streptomyces sp. FZ201 isolated from natural habitats.

Di-n-butyl phthalate (DBP) is one of the most extensively used phthalic acid esters (PAEs) and is considered to be an emerging, globally concerning pollutant. The genus Streptomyces holds promise as a degrader of various organic pollutants, but PAE biodegradation mechanisms by Streptomyces species remain unsolved. In this study, a novel PAE-degrading Streptomyces sp. FZ201 isolated from natural habitats efficiently degraded various PAEs. FZ201 had strong resilience against DBP and exhibited immediate degradation, with kinetics adhering to a first-order model. The comprehensive biodegradation of DBP involves de-esterification, ß-oxidation, trans-esterification, and aromatic ring cleavage. FZ201 contains numerous catabolic genes that potentially facilitate PAE biodegradation. The DBP metabolic pathway was reconstructed by genome annotation and intermediate identification. Streptomyces species have an open pangenome with substantial genome expansion events during the evolutionary process, enabling extensive genetic diversity and highly plastic genomes within the Streptomyces genus. FZ201 had a diverse array of highly expressed genes associated with the degradation of PAEs, potentially contributing significantly to its adaptive advantage and efficiency of PAE degradation. Thus, FZ201 is a promising candidate for remediating highly PAE-contaminated environments. These findings enhance our preliminary understanding of the molecular mechanisms employed by Streptomyces for the removal of PAEs.

Formation and control of disinfection by-products during the trichloroisocyanuric acid disinfection in swimming pool water.

The increasing demand for trichloroisocyanuric acid (TCCA) in swimming pool disinfection highlights the need to evaluate its applicability in terms of disinfection by-product (DBP) formation. Nevertheless, there is limited understanding of DBP formation and control during TCCA disinfection, particularly concerning the effects of various management parameters. This study aimed to fill this knowledge gap by comprehensively investigating DBP formation during TCCA chlorination, with a particular focus on assessing the contribution and interaction of influencing factors using Box-Behnken Design and response surface methodology. Results indicated that the concentrations of trichloroacetaldehyde, chloroform, dichloroacetic acid, trichloroacetic acid, and dichloroacetonitrile produced by TCCA disinfectant were 42.5%, 74.0%, 48.1%, 94.7% and 42.6% of those by the conventional sodium hypochlorite disinfectant, respectively. Temperature exhibited the most significant impact on chloroform formation (49%), while pH played a major role in trichloroacetaldehyde formation (44%). pH2 emerged as the primary contributor to dichloroacetic acid (90%) and trichloroacetic acid (93%) formation. The optimum water quality conditions were determined based on the minimum total DBPs (pH = 7.32, Temperature = 23.7 °C, [Cl-] = 437 mg/L). Chlorine dosage and contact time exhibited greater influence than precursor concentration on chloroform, dichloroacetonitrile, trichloroacetaldehyde, trichloroacetic acid, and total DBPs. Although the interaction between water quality parameters was weak, the interaction between disinfection operating parameters demonstrated substantial effects on DBP formation (8.56-19.06%). Furthermore, the DBP predictive models during TCCA disinfection were provided for the first time, which provides valuable insights for DBP control and early warning programs.

Repression of MRP51 in cis does not contribute to the synthetic growth defect conferred by an hphMX4-marked deletion of DBP1 in a ded1-ts mutant.

Powers et al. recently demonstrated that the hphMX6 cassette used to delete DPB1 in dbp1Δ::hphMX6 yeast mutants leads to reduced expression in cis of the adjacent gene MRP51, encoding the mitochondrial small subunit (SSU) ribosomal protein Mrp51. Here we provide evidence that elimination of Dbp1, not reduced MRP51 expression, underlies the synthetic growth defect of a dbp1Δ::hphMX6 ded1-ts mutant on glucose-containing medium, where respiration is dispensable, consistent with our previous conclusion that Dbp1 and Ded1 perform overlapping functions in stimulating translation initiation on mRNAs burdened with long or structured 5'UTRs in cells cultured with glucose.