DNA profiling in India: Addressing issues of sample preservation, databasing, marker selection, & statistical approaches.

DNA technology is the gold standard with respect to the identification of individuals from biological evidence. The technology offers the convenience of a universally similar approach and methodology for analysis across the globe. However, the technology has not realised its full potential in India due to the lack of a DNA database and lacunae in sample collection and preservation from the scene of crime and victims (especially those of sexual assault). Further, statistical interpretation of DNA results is non-existent in the majority of cases. Though the latest technologies and developments in the field of DNA analysis are being adopted and implemented,very little has been enacted practically to improve optimise sample collection and preservation. This article discusses current casework scenarios that highlight the pitfalls and ambiguous areas in the field of DNA analysis, especially with respect DNA databases, sampling, andstatistical approaches to genetic data analysis. Possible solutions and mitigation measures are suggested.

Recovery of DNA from acetaminophen exploring physical state and sampling methods.

Research into the recovery of DNA from illicit drug samples has shown it is possible to get forensically useful profiles from such substrates. However, it is not yet known if the different physical states that drugs can be found in influences the quantity and quality of DNA that can be recovered or what is the best sampling method to adopt for powdered samples. This research used acetaminophen in four different states - large crystalline, powder, in solution, or residue - to determine the efficacy of current DNA technology in recovery and analysis of the resulting sample. Five replicates of each were prepared. Human blood was deposited on or mixed with the drug and left for 1 hour. The surface of the drug was sampled by wet/dry swabbing (where appropriate), or the entire sample was deposited in a tube, and the DNA then extracted using DNA-IQ™. The amount of DNA recovered (ng), degradation index, number of PCR cycles (Ct) required for the IPC to reach threshold, number of alleles in the DNA profile and average peak height (APH) were assessed. All samples, irrespective of the physical state they were collected from, returned full DNA profiles that corresponded to the DNA profile of the blood donor, with no degradation or inhibition detected. It was also found the wet/dry swabbing method returned higher levels of DNA than inclusion of the entire sample into the tube for powdered acetaminophen and the appropriate method to use will be dependent on casework circumstances. The findings of this research further develops our understanding of the recovery of DNA from drugs, and supports the need for further investigation to understand under what conditions DNA can be recovered from illicit substances.

Emerging use of air eDNA and its application to forensic investigations - A review.

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Improvements in DNA technologies allow collection and profiling of trace samples, comprised of few cells, significantly expanding the types of exhibits targeted for DNA analysis to include touched surfaces. However, success rates from trace and touch DNA samples tend to be poorer compared to other biological materials such as blood. Simultaneously, there have been recent advances in the utility of environmental DNA collection (eDNA) in identification and tracking of different biological organisms and species from bacteria to naked mole rats in different environments, including, soil, ice, snow, air and aquatic. This paper examines the emerging methods and research into eDNA collection, with a special emphasis on the potential forensic applications of human DNA collection from air including challenges and further studies required to progress implementation.

Up in the air: Presence and collection of DNA from air and air conditioner units.

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Touch or trace DNA samples from surfaces and objects deemed to have been contacted are frequently collected. However, a person of interest may not leave any traces on contacted surfaces, for example, if wearing gloves. A novel means of sampling human DNA from air offers additional avenues for DNA collection. In the present study, we report on the results of a pilot study into the prevalence and persistence of human DNA in the air. The first aspect of the pilot study investigates air conditioner units that circulate air around a room, by sampling units located in four offices and four houses at different time frames post-cleaning. The second aspect investigates the ability to collect human DNA from the air in rooms, with and without people, for different periods of time and with different types of collection filters. Results of this pilot study show that human DNA can be collected on air conditioner unit surfaces and from the air, with air samples representing the more recent occupation while air conditioner units showing historic use of the room.

DNA recovery after sequential processing of latent fingerprints on black polyethylene plastic.

Latent fingerprints on plastic substrates can be visualized by using sequential treatments to enhance the contrast between the fingerprint residues and underlying substrate; however, the extent to which these processes affect subsequent DNA analysis is mostly unknown. Latent fingerprints deposited on black plastic by one donor were visualized with single-process fingerprint powders (i.e., white powder, bichromatic powder, or bichromatic magnetic powder) or sequential treatments (i.e., laser → reflected ultraviolet imaging system (RUVIS) → CA fuming → RUVIS → Rhodamine 6G, Ardrox, and MBD (RAM) or CA fuming → RAM/laser → bichromatic magnetic powder). Samples were examined after the addition of each treatment. DNA was collected using cotton swabs, extracted, quantified, and amplified. DNA yields, peak heights, number of alleles obtained, and percentage of DNA profiles eligible for CODIS upload were examined. Latent fingerprints processed with the laser and up to three sequential treatments generated DNA profiles with significantly higher peaks heights than those of the untreated samples. Fingerprints processed with the laser and up to two sequential treatments generated DNA profiles with significantly more alleles. All methods beginning with laser enhancement generated more CODIS-eligible profiles. Additional research is needed to determine the extent to which initial laser enhancement impacts the success of downstream DNA profiling results. Although DNA profile development is not guaranteed due to the variable quantities of DNA contained within latent fingerprints, the selection of an appropriate latent fingerprint visualization method could maximize both fingerprint detection and the generation of CODIS-eligible DNA profiles.

Cross-species amplification from non-human primate DNAs in commercial human DNA assay kits.

Species specificity of commercial human DNA quantification kits and short tandem repeat (STR) profiling kits was examined using primate DNA samples. These samples comprised 33 individuals from eight primate species, each with gender and kinship data, including human (Homo sapiens), chimpanzee (Pan troglodytes), gorilla (Gorilla gorilla), and orangutan (Pongo pygmaeus) of Hominidae family, and Japanese macaque (Macaca fuscata), long-tailed macaque (Macaca fascicularis), hamadryas baboon (Papio hamadryas), and savannah monkey (Chlorocebus sp.) of Cercopithecidae family. The findings revealed varying levels of cross-species amplifications in all non-human DNA samples that correlated with their evolutionary proximity to humans, both kit types. Moreover, cross-species amplification, including female DNA samples, was observed in a Y-chromosomal STR profiling kit. Additionally, species specificity differed among the commercial kits examined. The cross-species amplification data presented in this study offer valuable assistance in interpreting the results of individual human identification in forensic cases involving non-human primates.

Droplet-based optical trapping for cell separation in mock forensic samples.

Optical tweezers have a wide range of uses for mechanical manipulation of objects in the microscopic range. This includes both living and static cells in a variety of biomedical and research applications. Single-focus optical tweezers, formed by focusing a laser beam through a high numerical aperture immersion objective, create a significant force, which enables controlled transport of a variety of different cell types and morphologies in three dimensions. Optical tweezers have been previously reported to capture and separate spermatozoa from a reconstituted simulated postcoital sample. We report herein the development of a simplified, more efficient cell transfer protocol that can separate and isolate both spermatozoa as well as leukocytes, with similar efficiencies as those previously reported. The new cell transfer method was used to separate sperm cells from a reconstituted mixture of spermatozoa and vaginal epithelial cells, with complete STR profiles developed from 50 cells with little evidence of contribution from the female contributor to the mixture. This modified protocol was then used to separate 21 samples of enriched leukocytes, with trapped cells ranging from 5 to 22 cells. Complete STR profiles were developed from as few as 10 leukocytes. Thus, with minimal sample preparation and a short trapping time, this method has the potential to provide an alternative to traditional differential extraction methods for separation of sperm:nonsperm mixtures while also providing versatility for separation of cells with differing morphologies.

A comparison of six adhesive tapes as tape lifts for efficient trace DNA recovery without the transfer of PCR inhibitors.

Tape-lifting is a non-destructive method employed in the laboratory to recover and collect trace DNA evidence from crime scene exhibits with porous surfaces. The success of tape-lifting is a balance between capturing the biological material and compatibility with downstream DNA extraction processes to ensure efficient release of the tape-lifted material during DNA extraction. In this study, six commercially available low-, regular- and high-tack adhesive tapes were evaluated. The low-tack S183 tape and the highly adhesive S-Hold tape were compared for DNA recovery efficiency from different materials commonly encountered in casework. All tape-lifts were processed using PrepFiler Express™ BTA and AutoMate Express™ Forensic DNA extraction systems, DNA samples quantitated by Quantifiler TRIO, amplified using Powerplex® 21 and VeriFiler™ PLUS (VFP), and analysed on a 3500xl genetic analyser to evaluate the quality of the resultant STR profiles obtained. The more adhesive S-Hold tape recovered comparable or more DNA than the low-tack S183 tape from the majority of materials tested. However, STR profiles obtained from S183 tape-lifts were of markedly higher quality compared to S-Hold tape-lifts. This was most evident for towel, denim and printed chiffon, where S-Hold samples exhibited severe PCR inhibition, with VFP internal quality markers confirming the presence of inhibitors. The findings suggest that strong adhesion is not necessarily beneficial for tape-lifting, as the low tack S183 tape was able to efficiently recover cellular material from the surface of porous substrates commonly encountered in casework, while avoiding the co-transfer of PCR-inhibitory substances from the sampled material.

Machine learning applications in forensic DNA profiling: A critical review.

Machine learning (ML) is a range of powerful computational algorithms capable of generating predictive models via intelligent autonomous analysis of relatively large and often unstructured data. ML has become an integral part of our daily lives with a plethora of applications, including web, business, automotive industry, clinical diagnostics, scientific research, and more recently, forensic science. In the field of forensic DNA, the manual analysis of complex data can be challenging, time-consuming, and error-prone. The integration of novel ML-based methods may aid in streamlining this process while maintaining the high accuracy and reproducibility required for forensic tools. Due to the relative novelty of such applications, the forensic community is largely unaware of ML capabilities and limitations. Furthermore, computer science and ML professionals are often unfamiliar with the forensic science field and its specific requirements. This manuscript offers a brief introduction to the capabilities of machine learning methods and their applications in the context of forensic DNA analysis and offers a critical review of the current literature in this rapidly developing field.

'Is your accuser me, or is it the software?' Ambiguity and contested expertise in probabilistic DNA profiling.

What happens when an algorithm is added to the work of an expert group? This study explores how algorithms pose a practical problem for experts. We study the introduction of a Probabilistic DNA Profiling (PDP) software into a forensics lab through interviews and court admissibility hearings. While meant to support experts' decision-making, in practice it has destabilized their authority. They respond to this destabilization by producing alternating and often conflicting accounts of the agency and significance of the software. The algorithm gets constructed alternately either as merely a tool or as indispensable statistical backing; the analysts' authority as either independent of the algorithm or reliant upon it to resolve conflict and create a final decision; and forensic expertise as resting either with the analysts or with the software. These tensions reflect the forensic 'culture of anticipation', specifically the experts' anticipation of ongoing litigation that destabilizes their control over the deployment and interpretation of expertise in the courtroom. The software highlights tensions between the analysts' supposed impartiality and their role in the courtroom, exposing legal and narrative implications of the changing nature of expertise and technology in the criminal legal system.

DNA and scale reading to identify repeat spawning in Atlantic salmon: Unique insights into patterns of iteroparity.

Iteroparity represents an important but often overlooked component of life history in anadromous Atlantic salmon. Here, we combined individual DNA profiling and scale reading to identify repeat spawners among ~8000 adult salmon captured in a fish trap in the river Etne, Norway, in the period 2015-2019. Additionally, 171 outward migrating kelts were captured in the spring of 2018-2020 and identified using molecular methods to estimate weight loss since ascending the river to spawn. The overall frequency of repeat spawners identified using molecular methods and scale reading combined was 7% in females and 3% in males (5% in total). Most of these (83%) spent one full year reconditioning at sea before returning for their second spawning, with a larger body size compared with their size at first spawning, gaining on average 15.9 cm. A single female migrating back into the river for a fifth breeding season was also identified. On average, kelts lost 40% bodyweight in the river, and more female than male kelts were captured during outward migration. The date of arrival in the upstream fish trap was significantly but moderately correlated between maiden and second entry to the river for alternate and consecutive spawners. The estimated contribution from repeat spawners to the total number of eggs deposited in the river each year varied between 2% and 17% (average 12%). Molecular-based methods marginally underestimated the number of repeat spawners compared with scale reading (5% vs 7%) likely due to a small number of returning spawners not being trapped and sampled. Differences between the methods were most evident when classifying the spawning strategy (alternate or consecutive-year repeat spawners), where the scale method identified proportionally more consecutive-year repeat spawners than the molecular method. This unique data set reveals previously unstudied components of this life history strategy and demonstrates the importance of repeat spawners in population recruitment.

Genome-Wide DNA Changes Acquired by Candida albicans Caspofungin-Adapted Mutants.

Drugs from the echinocandin (ECN) class are now recommended 'front-line' treatments of infections caused by a prevailing fungal pathogen, C. albicans. However, the increased use of ECNs is associated with a rising resistance to ECNs. As the acquisition of ECN resistance in C. albicans is viewed as a multistep evolution, determining factors that are associated with the decreased ECN susceptibility is of importance. We have recently identified two cohorts of genes that are either up- or downregulated in concert in order to control remodeling of cell wall, an organelle targeted by ECNs, in laboratory mutants with decreased ECN susceptibility. Here, we profiled the global DNA sequence of four of these adapted mutants in search of DNA changes that are associated with decreased ECN susceptibility. We find a limited number of 112 unique mutations representing two alternative mutational pathways. Approximately half of the mutations occurred as hotspots. Approximately half of mutations and hotspots were shared by ECN-adapted mutants despite the mutants arising as independent events and differing in some of their phenotypes, as well as in condition of chromosome 5. A total of 88 mutations are associated with 43 open reading frames (ORFs) and occurred inside of an ORF or within 1 kb of an ORF, predominantly as single-nucleotide substitution. Mutations occurred more often in the 5'-UTR than in the 3'-UTR by a 1.67:1 ratio. A total of 16 mutations mapped to eight genomic features that were not ORFs: Tca4-4 retrotransposon; Tca2-7 retrotransposon; lambda-4a long terminal repeat; mu-Ra long terminal repeat; MRS-7b Major Repeat Sequence; MRS-R Major Repeat Sequence; RB2-5a repeat sequence; and tL (CAA) leucine tRNA. Finally, eight mutations are not associated with any ORF or other genomic feature. Repeated occurrence of single-nucleotide substitutions in non-related drug-adapted mutants strongly indicates that these DNA changes are accompanying drug adaptation and could possibly influence ECN susceptibility, thus serving as factors facilitating evolution of ECN drug resistance due to classical mutations in FKS1.

Comparative analysis of two Rapid DNA technologies for the processing of blood and saliva-based samples.

Rapid DNA technologies recently gained significant momentum as a means to generate DNA profiles faster than with standard laboratory workflows. Initially developed for the analysis of buccal reference samples, applications are being considered for other types of forensic samples. In this study, an identical set of 150 blood and saliva-based samples was processed using two different Rapid DNA technologies, the Applied BioSystems™ RapidHIT™ ID System using the RapidINTEL™ sample cartridge and the ANDE™ 6C Rapid DNA Analysis™ System using the I-Chip. A subset of samples were subjected to alternative collection methods or sample pre-treatments to determine the optimal strategy for each instrument. An equivalent sample set was also processed using a conventional DNA analysis workflow. The sensitivity range of the two Rapid DNA technologies was comparable based on blood and saliva dilution series, with both technologies able to generate full profiles from samples typically yielding 5-10 ng of DNA when processed using conventional DNA analysis. The brand of cotton swabs used for Rapid DNA analysis had an impact on the results for both systems. Differences were observed in success rate between the two systems when processing blood (on fabrics, FTA paper or hard surfaces) and saliva-based samples (drink containers, FTA paper, chewing gum, cigarette butt filter paper) and depended on the sample type. Importantly, deviating from the manufacturer's instructions for sample collection and pre-treatment was more detrimental to the ANDE 6C results. The quality of DNA profiles, as assessed using heterozygote peak height ratios, interloci balance and artifact presence, confirmed the results to be reliable and acceptable for single source samples. Profiling results were obtained when samples were reprocessed using the same Rapid DNA technology or conventional DNA analysis. Secondary analysis using a substitute software (GeneMapper ID-X v1.5) to recover additional genetic information was shown to be feasible. Finally, a comparison between the Applied Biosystems™ RapidHIT™ ID System Software v1.3.1 and v1.3.2 was also performed. Findings of this study could assist those interested in using Rapid DNA technology for blood or saliva-based samples, in various settings and for different applications.

Genetic structure of the population of wild-growing vines of the Utrish Nature Reserve.

Grapes are one of the most common agricultural crops in the world. Currently, the analysis of genotypes directly at the DNA level is considered to be the most accurate method for studying the plant gene pool. The study of wild vines and ancient varieties in various regions of viticulture is an important direction of research in this field. The purpose of this work was to study the population of wild grapes growing on the territory of the Utrish Nature Reserve on the Black Sea coast of Krasnodar Region. The territory of the reserve is of interest as it is a site of ancient settlements, and the environmental conditions are suitable for the growth of wild grapes. During the survey of the territory, 24 samples of wild grapes were found, which were described according to the main morphological characteristics and analyzed by the molecular genetic method. The found vines were genotyped using 15 DNA markers, including nine commonly used for DNA fingerprinting (VVS2, VVMD5, VVMD7, VVMD25, VVMD27, VVMD28, VVMD32, VrZAG62, VrZAG79) and VVIb23, which allows determining hermaphrodite and dioecious vines. Statistical processing of microsatellite loci polymorphism data was carried out using the GenAlEx 6.5 program. The genetic relationships of the studied vines were evaluated using the PAST 2.17c program. The samples were found to be morphologically and genetically polymorphic. The number of alleles identified in the sample varied from 5 to 18 and averaged 8 alleles per locus. Statistical processing of DNA analysis data made it possible to identify two genetically different populations among the wild discovered vines. An assessment of genetic similarity of the found vines with some local varieties of geographically close viticulture regions, rootstocks and representatives of Vitis sylvestris from other territories was made. One of the populations found in the Utrish Nature Reserve is close to a number of V. sylvestris genotypes, the DNA profiles of which are presented in the Vitis International Variety Catalogue.

Impact on touch DNA of an alcohol-based hand sanitizer used in COVID-19 prevention.

In the last years, forensic research has been focused on touch DNA in order to improve its evidential value in criminal activity investigations as well as to understand the variables impacting touch DNA. One of the emerging variables is represented by the use of alcohol-based sanitizers, which was suggested for hand hygiene during the COVID-19 pandemic. The aims of the present study were to assess the effect of a hand sanitizer on touch DNA deposition, transfer, and recovery and also to evaluate STR typing success, quality of DNA profiles, and personal identification. Before and after the use of an alcohol-based hand sanitizer, 20 volunteers deposited on glass surfaces 120 fingerprints, containing skin-derived or salivary DNA. Samples were quantified by real-time quantitative PCR (q-PCR), and 76 samples yielding > 15 pg/µl were typed for 21 autosomal STRs by GlobalFiler® PCR Amplification Kit. DNA profiles were classified into single source, mixed, and inconclusive profiles, and a LR assessment was performed by comparison to the reference samples using LRmix Studio software. After the use of hand sanitizer, samples yielded lower quantities of recovered transferred DNA, especially considering samples containing salivary DNA (p < 0.05 by Friedman test). All the 76 amplified samples (63.3% of the total) showed at least 10 typed loci, and 83-100% of profiles were consistent with the reference ones on the basis of a LR value ≥ 106. Results showed that, although the hand sanitizer reduces the DNA recovering, touch DNA samples might still be useful for forensic personal identification even when hand sanitizers are used.

Quantifying DNA loss in laboratory-created latent prints due to fingerprint processing.

Fingerprints, which are associated with touch samples, typically contain a limited amount of DNA. The amount of available DNA can be further reduced when the same touch samples undergo fingerprint processing [1]. The fingerprint development process consists of high-powered lighting (inherent luminescence and UV light) and chemical compounds (ninhydrin, black powder, cyanoacrylate, and rhodamine 6 G) which could reduce DNA quality and quantity. Therefore, forensic scientists often must select one type of analysis over the other due to the destructive nature of processing. DNA and latent fingerprinting are both useful sources for identification, although both can produce partial results. A partial DNA profile may only contain a few alleles, limiting the ability to identify a potential suspect to perform comparisons. A partial fingerprint generally means that only a very small part of the fingerprint is present, which makes comparisons difficult. Because partial results are common, combining data from both fingerprinting and DNA analysis would increase the confidence of an identification of a person. Significant research has been performed to determine if a DNA profile can be obtained from latent processed fingerprints; however, there has yet to be research done in a standardized manner. In this study, we used standardized mock "fingerprints" in order to reduce fingerprint DNA variability and specifically focused on DNA quantitation after each step in the fingerprinting process. Results suggest that latent print processing techniques used on non-porous surfaces (plastic, duct-tape, metal, and rubber) do not affect DNA quantity or quality. In contrast, ninhydrin, a chemical used for processing fingerprints present on porous surfaces (wood and paper), significantly reduced DNA recovery. Together these results suggest that DNA can still be performed on latent print processed items, unless ninhydrin has been used.

Preliminary investigation into isolation and extraction of DNA recovered from drug residues.

It is a commonly held belief that drug residues may affect the integrity of DNA and/or interfere with DNA analysis, and therefore DNA on drug paraphernalia and the associated drugs may be overlooked as a source of evidence. This study investigated whether DNA could be isolated from a drug residue-bearing surface to ascertain whether a forensically useful DNA profile could be obtained. Human blood and pre-extracted "naked" DNA were deposited on samples of acetaminophen, codeine, morphine, oxycodone, ketamine, and synthetic cannabinoids and left for an hour before DNA extraction using DNA-IQ™. To investigate DNA integrity, the absolute amount of DNA recovered, degradation index, and number of PCR cycles required for the IPC to reach threshold (Ct), number of reportable alleles and average peak height (APH) in the DNA profile, were examined. The samples were also qualitatively analysed using LC:MS to determine if any residual drugs were present in the samples post-DNA extraction. Overall, the drugs had no to minimal degradation or inhibitory effects on the DNA with sufficient DNA recovered to generate a partial or full DNA profile in 80% of naked DNA samples and 100 % of blood samples. The amount of DNA collected was sufficient for further analysis in 86% of naked DNA samples, and 100% of blood samples, with all median APH values being over the 175 RFU standard. Chemical analysis showed that traces of the drug were still present in the samples after DNA extraction was performed. Therefore, this study demonstrates forensically useful DNA can be recovered from surfaces bearing drug residues, even when sampling directly from the samples of drugs.

Evaluation of the detection of the homologous transfusion of a red blood cell concentrate in vivo for antidoping.

Two doping cases of homologous blood transfusion (HBT) during Tokyo 2020 Summer Olympics have shown that more controls are needed. The method of detection using flow cytometry to evaluate the expression of minor blood group antigens from red blood cells (RBCs) and identify different RBC populations is efficient but still complex to perform with multiple antigens detection. Recently, the interest of using forensic DNA analysis was also highlighted as a potential new method to detect HBT, with possibility to start from dried blood spots (DBS) instead of fresh blood. After a first phase of development, a protocol was validated for HBT detection using DNA analysis after extraction from DBS. Presence of a second DNA was clear down to 2% of donor blood in vitro. A flow cytometry protocol was also developed with preparation and analysis in 96-well plates and detection of two different antigens per well using two secondary antibodies with distinct fluorophores. The objective of the project was to evaluate the window of detection of an HBT performed in vivo with 150 mL of RBC concentrate. Blood samples obtained over 7 weeks post-transfusion were analyzed. DNA profiling from DBS was not sensitive enough to detect the presence of a second DNA even 1 day after transfusion. On the contrary, the flow cytometry protocol was very efficient and allowed identification of several double populations of RBC (expressing/non-expressing several antigens) until day 50 post-transfusion. This protocol can be fully validated for a future application to doping control samples.

Journey of unidentified bodies towards DNA identification: A social, medico-legal and forensic perspective from New Delhi in India.

INTRODUCTION: According to studies undertaken in numerous nations, alarming increase in the number of unidentified bodies is a global concern. The population worldwide is increasing, and so is the population of the developing Indian subcontinent. Interestingly, a portion of this population is made up of individuals who have flocked from different states in search of employment, etc. Such people die under unfortunate circumstances, and under a police inquest, the process of their identification begins with an autopsy surgeon and a forensic scientist playing a larger role in it. DNA profiling provides an efficient tool in identification of such unidentified bodies. In addition, the authors have attempted to put together a background narrative of the ill-fated individuals; divulging into their standing in the urban society. MATERIALS & METHODS: A total of 100 case files related to unidentified bodies were selected from total cases received between 2017 and 2021 at Regional Forensic Science Laboratory. The various parameters were reviewed, followed by DNA profiling of all exhibits. An attempt was made to correlate the said parameters with respect to DNA profiles and vice-versa to comprehend how these parameters, coupled with DNA profiling, help in identification of unidentified bodies. RESULTS: The majority of the unknown deceased were males in the age range of 3-90 years old. The unknown deceased died of natural or unnatural causes, with majority dying of injury or trauma. The approximate time since death ranged from same day up to 6 months. Exhibits like dried blood gauzes, liquid blood samples in EDTA vials, teeth, and bones were able to generate DNA profiles in most of the cases for identity of deceased. Blood gauze was the most common source of exhibits submitted at the laboratory. CONCLUSION: The study's findings revealed that besides age, sex or cause and manner of death of decedent, the type of exhibit (blood gauze, tooth, etc.) for DNA examination, the appropriate exhibit, if collected and preserved properly, can play a vital role in identification. A systematised action plan is required by law enforcement agencies in order to minimise the social and legal burden of unidentified dead bodies. In such a plan, medical experts must note down all possible findings at the time of post-mortem and collect suitable exhibits for DNA profiling. Further DNA profiling of the exhibits by forensic DNA experts should be done to preserve the unaltered identity of the deceased for a longer term in a DNA database.

The effect of NucleoSpin® Forensic Filters on DNA recovery from trace DNA swabs.

Forensic DNA profiling is a globally accepted method for human identification, however, obtaining full DNA profiles from trace DNA can be challenging. The optimal recovery of DNA from trace DNA swabs is therefore crucial. Methods for extracting DNA from swabs often make use of a spin basket combined with a centrifugation step, to enhance the release of cells from the swab prior to DNA extraction. The NucleoSpin® Forensic Filter (Macherey-Nagel, Düren) is a type of spin basket, but it has not been thoroughly assessed on trace DNA samples. This study aimed to assess if the inclusion of the NucleoSpin® Forensic Filter significantly improved DNA recovery and DNA profiling success from cotton and flocked swabs used to collect trace DNA and buccal cells (control). Buccal cells and trace DNA samples were collected from 25 volunteers using each swab type (cotton and flocked) in duplicate. DNA was extracted from the samples using the NucleoSpin® DNA Forensic kit, one set with, and the other set without, NucleoSpin® Forensic Filters. DNA concentration was assessed using real time PCR, and DNA profiling was done using the PowerPlex® ESX 16 system. The inclusion of the NucleoSpin® Forensic Filters significantly improved DNA concentration for buccal cells that were collected using flocked swabs (p = 0.035). However, no significant differences were noted for trace DNA samples for either swab type. There was also no significant difference in DNA profiling success when NucleoSpin® Forensic Filters were used, regardless of swab and sample type. These results may be helpful for laboratories that are considering the NucleoSpin® Forensic Filters in the DNA extraction workflow, particularly for trace DNA samples.