Computer-Vision-Oriented Adaptive Sampling in Compressive Sensing.

Compressive sensing (CS) is recognized for its adeptness at compressing signals, making it a pivotal technology in the context of sensor data acquisition. With the proliferation of image data in Internet of Things (IoT) systems, CS is expected to reduce the transmission cost of signals captured by various sensor devices. However, the quality of CS-reconstructed signals inevitably degrades as the sampling rate decreases, which poses a challenge in terms of the inference accuracy in downstream computer vision (CV) tasks. This limitation imposes an obstacle to the real-world application of existing CS techniques, especially for reducing transmission costs in sensor-rich environments. In response to this challenge, this paper contributes a CV-oriented adaptive CS framework based on saliency detection to the field of sensing technology that enables sensor systems to intelligently prioritize and transmit the most relevant data. Unlike existing CS techniques, the proposal prioritizes the accuracy of reconstructed images for CV purposes, not only for visual quality. The primary objective of this proposal is to enhance the preservation of information critical for CV tasks while optimizing the utilization of sensor data. This work conducts experiments on various realistic scenario datasets collected by real sensor devices. Experimental results demonstrate superior performance compared to existing CS sampling techniques across the STL10, Intel, and Imagenette datasets for classification and KITTI for object detection. Compared with the baseline uniform sampling technique, the average classification accuracy shows a maximum improvement of 26.23%, 11.69%, and 18.25%, respectively, at specific sampling rates. In addition, even at very low sampling rates, the proposal is demonstrated to be robust in terms of classification and detection as compared to state-of-the-art CS techniques. This ensures essential information for CV tasks is retained, improving the efficacy of sensor-based data acquisition systems.

External Data Systems Enable Enhanced (and Sustainable) Fourier Transform Mass Spectrometry Imaging for Legacy Hybrid Linear Ion Trap-Orbitrap Platforms.

Legacy Fourier transform (FT) mass spectrometers provide robust platforms for bioanalytical mass spectrometry (MS) yet lack the most modern performance capabilities. For many laboratories, the routine investment in next generation instrumentation is cost prohibitive. Field-based upgrades provide a direct path to extend the usable lifespan of MS platforms which may be considered antiquated based on performance specifications at the time of manufacture. Here we demonstrate and evaluate the performance of a hybrid linear ion trap (LTQ)-Orbitrap mass spectrometer that has been enhanced via an external high-performance data acquisition and processing system to provide true absorption mode FT processing during an experimental acquisition. For the application to mass spectrometry imaging, several performance metrics have been improved including mass resolving power, mass accuracy, and dynamic range to provide an FTMS system comparable to current platforms. We also demonstrate, perhaps, the unexpected ability of these legacy platforms to detect usable time-domain signals up to 5 s in duration to achieve a mass resolving power 8× higher than the original platform specification.

A risk-based approach to the analysis of potential climate change effects on fish communities associated to Posidonia oceanica in the Mediterranean.

The Mediterranean is recognized as a climate change hotspot, with ongoing warming anticipated to impact its habitats and their associated fish fauna. Among these habitats, the seagrass Posidonia oceanica stands out as a foundational species, critical for the stability of coastal fish communities. However, our understanding of climate change consequences on P. oceanica associated fish fauna to date remains limited in part due to a lack of long-term data. This study aimed to highlight potential climate change risks to fish species associated with Posidonia, integrating data on species' thermal envelopes with their habitat and depth preferences into a climate change risk index. Specifically, 9 species, including three pipefish and several wrasse species of the genus Symphodus, emerged as being at higher potential risk from climatic change. A historical time series from Palma Bay (Balearic Islands, Spain), spanning 45 years and providing clear evidence of warming, was employed to evaluate trends in species abundance and occurrence in relation to their relative climate risk score. While certain high-risk species like Symphodus cinereus and Diplodus annularis showed an increase in abundance over time, others, such as the pipefish Syngnathus acus, Syngnathus typhle and Nerophis maculatus experienced declines. The absence of observed declines in some high-risk species could be attributed to several factors, such as acclimation, adaptation, or unmet response thresholds. However, this does not rule out the potential for future changes in these species. Factors such as increased nutrient influx due to growing human populations and changes in fishing regulations may also have contributed to the observed trends. These findings underscore the intricate interplay of environmental and anthropogenic factors and accentuate the pressing need for sustained, long-term data acquisition to fathom the implications of climate change on this highly important marine ecosystem.

Development of an application programming interface to automate downloading and processing of precision livestock data.

Advancements in technology have ushered in a new era of sensor-based measurement and management of livestock production systems. These sensor-based technologies have the ability to automatically monitor feeding, growth, and enteric emissions for individual animals across confined and extensive production systems. One challenge with sensor-based technologies is the large amount of data generated, which can be difficult to access, process, visualize, and monitor information in real time to ensure equipment is working properly and animals are utilizing it correctly. A solution to this problem is the development of application programming interfaces (APIs) to automate downloading, visualizing, and summarizing datasets generated from precision livestock technology (PLT). For this methods paper, we develop three APIs and accompanying processes for rapid data acquisition, visualization, systems tracking, and summary statistics for three technologies (SmartScale, SmartFeed, and GreenFeed) manufactured by C-Lock Inc (Rapid City, SD). Program R markdown documents and example datasets are provided to facilitate greater adoption of these techniques and to further advance PLT. The methodology presented successfully downloaded data from the cloud and generated a series of visualizations to conduct systems checks, animal usage rates, and calculate summary statistics. These tools will be essential for further adoption of precision technology. There is huge potential to further leverage APIs to incorporate a wide range of datasets such as weather data, animal locations, and sensor data to facilitate decision-making on time scales relevant to researchers and livestock managers.

Development of potential dysgraphia handwriting dataset.

This report presents a dataset of offline handwriting samples among Malaysian schoolchildren with potential dysgraphia. The images contained Malay sentences written by primary school students and children under intervention by the Malaysia Dyslexia Association (PDM). Students were expected to copy and write the sentences provided on the paper form that was used to gather data. Students were required to write three sets of sentences. The paper was digitalized by scanning it and converting it into digital form. Furthermore, the images were pre-processed using image processing techniques by converting the images into binary format and interchanging the foreground and background colors. The images were then classified into two categories, namely potential dysgraphia and low potential dysgraphia. The dataset comprised a total of 249 handwriting images, obtained from a sample of 83 participants who were selected in the data collection process, with 114 for potential dysgraphia and 135 for low potential dysgraphia. Both categories of handwriting images were prepared in black and white images.

Development of a machine vision-based weight prediction system of butterhead lettuce (Lactuca sativa L.) using deep learning models for industrial plant factory.

Introduction: Indoor agriculture, especially plant factories, becomes essential because of the advantages of cultivating crops yearly to address global food shortages. Plant factories have been growing in scale as commercialized. Developing an on-site system that estimates the fresh weight of crops non-destructively for decision-making on harvest time is necessary to maximize yield and profits. However, a multi-layer growing environment with on-site workers is too confined and crowded to develop a high-performance system.This research developed a machine vision-based fresh weight estimation system to monitor crops from the transplant stage to harvest with less physical labor in an on-site industrial plant factory. Methods: A linear motion guide with a camera rail moving in both the x-axis and y-axis directions was produced and mounted on a cultivating rack with a height under 35 cm to get consistent images of crops from the top view. Raspberry Pi4 controlled its operation to capture images automatically every hour. The fresh weight was manually measured eleven times for four months to use as the ground-truth weight of the models. The attained images were preprocessed and used to develop weight prediction models based on manual and automatic feature extraction. Results and discussion: The performance of models was compared, and the best performance among them was the automatic feature extraction-based model using convolutional neural networks (CNN; ResNet18). The CNN-based model on automatic feature extraction from images performed much better than any other manual feature extraction-based models with 0.95 of the coefficients of determination (R2) and 8.06 g of root mean square error (RMSE). However, another multiplayer perceptron model (MLP_2) was more appropriate to be adopted on-site since it showed around nine times faster inference time than CNN with a little less R2 (0.93). Through this study, field workers in a confined indoor farming environment can measure the fresh weight of crops non-destructively and easily. In addition, it would help to decide when to harvest on the spot.

A Smart, Data-Driven Approach to Qualify Additively Manufactured Steel Samples for Print-Parameter-Based Imperfections.

With additive manufacturing (AM) processes such as Wire Arc Additive Manufacturing (WAAM), components with complex shapes or with functional properties can be produced, with advantages in the areas of resource conservation, lightweight construction, and load-optimized production. However, proving component quality is a challenge because it is not possible to produce 100% defect-free components. In addition to this, statistically determined fluctuations in the wire quality, gas flow, and their interaction with process parameters result in a quality of the components that is not 100% reproducible. Complex testing procedures are therefore required to demonstrate the quality of the components, which are not cost-effective and lead to less efficiency. As part of the project "3DPrintFEM", a sound emission analysis is used to evaluate the quality of AM components. Within the scope of the project, an approach was being developed to determine the quality of an AM part dependent not necessarily on its geometry. Samples were produced from WAAM, which were later cut and milled to precision. To determine the frequencies, the samples were put through a resonant frequency test (RFM). The unwanted modes were then removed from the spectrum produced by the experiments by comparing it with FEM simulations. Later, defects were introduced in experimental samples in compliance with the ISO 5817 guidelines. In order to create a database of frequencies related to the degree of the sample defect, they were subjected to RFM. The database was further augmented through frequencies from simulations performed on samples with similar geometries, and, hence, a training set was generated for an algorithm. A machine-learning algorithm based on regression modelling was trained based on the database to sort samples according to the degree of flaws in them. The algorithm's detectability was evaluated using samples that had a known level of flaws which forms the test dataset. Based on the outcome, the algorithm will be integrated into an equipment developed in-house to monitor the quality of samples produced, thereby having an in-house quality assessment routine. The equipment shall be less expensive than conventional acoustic equipment, thus helping the industry cut costs when validating the quality of their components.

Live Intersection Data Acquisition for Traffic Simulators (LIDATS).

Real-time traffic signal acquisition and network transmission are essential components of intelligent transportation systems, facilitating real-time traffic monitoring, management, and analysis in urban environments. In this paper, we introduce a comprehensive system that incorporates live traffic signal acquisition, real-time data processing, and secure network transmission through a combination of hardware and software modules, called LIDATS. LIDATS stands for Live Intersection Data Acquisition for Traffic Simulators. The design and implementation of our system are detailed, encompassing signal acquisition hardware as well as a software platform that is used specifically for real-time data processing. The performance evaluation of our system was conducted by simulation in the lab, demonstrating its capability to reliably capture and transmit data in real time, and to effectively extract the relevant information from noisy and complex traffic data. Supporting a variety of intelligent transportation applications, such as real-time traffic flow management, intelligent traffic signal control, and predictive traffic analysis, our system enables remote data analysis and decisionmaking, providing valuable insights and enhancing the traffic efficiency while reducing the congestion in urban environments.

Quality Analysis of 3D Point Cloud Using Low-Cost Spherical Camera for Underpass Mapping.

Three-dimensional point cloud evaluation is used in photogrammetry to validate and assess the accuracy of data acquisition in order to generate various three-dimensional products. This paper determines the optimal accuracy and correctness of a 3D point cloud produced by a low-cost spherical camera in comparison to the 3D point cloud produced by laser scanner. The fisheye images were captured from a chessboard using a spherical camera, which was calibrated using the commercial Agisoft Metashape software (version 2.1). For this purpose, the results of different calibration methods are compared. In order to achieve data acquisition, multiple images were captured from the inside area of our case study structure (an underpass in Wiesbaden, Germany) in different configurations with the aim of optimal network design for camera location and orientation. The relative orientation was generated from multiple images obtained by removing the point cloud noise. For assessment purposes, the same scene was captured with a laser scanner to generate a metric comparison between the correspondence point cloud and the spherical one. The geometric features of both point clouds were analyzed for a complete geometric quality assessment. In conclusion, this study highlights the promising capabilities of low-cost spherical cameras for capturing and generating high-quality 3D point clouds by conducting a thorough analysis of the geometric features and accuracy assessments of the absolute and relative orientations of the generated clouds. This research demonstrated the applicability of spherical camera-based photogrammetry to challenging structures, such as underpasses with limited space for data acquisition, and achieved a 0.34 RMS re-projection error in the relative orientation step and a ground control point accuracy of nearly 1 mm. Compared to the laser scanner point cloud, the spherical point cloud reached an average distance of 0.05 m and acceptable geometric consistency.

Three-Dimensional-Scanning of Pipe Inner Walls Based on Line Laser.

In this study, an innovative laser 3D-scanning technology is proposed to scan pipe inner walls in order to solve the problems of the exorbitant expenses and operational complexities of the current equipment for the 3D data acquisition of the pipe inner wall, and the difficulty of both the efficiency and accuracy of traditional light stripe-center extraction methods. The core of this technology is the monocular-structured light 3D scanner, the image processing strategy based on tracking speckles, and the improved gray barycenter method. The experimental results demonstrate a 52% reduction in the average standard error of the improved gray barycenter method when compared to the traditional gray barycenter method, along with an 83% decrease in the operation time when compared to the Steger method. In addition, the size data of the inner wall of the pipe obtained using this technology is accurate, and the average deviation of the inner diameter and length of the pipe is less than 0.13 mm and 0.41 mm, respectively. In general, it not only reduces the cost, but also ensures high efficiency and high precision, providing a new and efficient method for the 3D data acquisition of the inner wall of the pipe.

A Narrative Review on Different Novel Machine Learning Techniques for Detecting Pathologies in Infants From Born Baby Cries.

This paper reviews the research work on the analysis and classification of pathological infant cries in the last 50 years. The literature review mainly covers the need and role of early clinical diagnosis, pathologies detected from cry samples, challenges in pathological cry signal data acquisition, signal processing techniques, and signal classifiers. The signal processing techniques include preprocessing, feature extraction from domains, such as time, spectral, time-frequency, prosodic, wavelet, etc, and feature selection for selecting dominant features. Literature covers traditional machine learning classifiers, such as Bayesian networks, decision trees, K-nearest neighbor, support vector machine, Gaussian mixture model, etc, and recently added neural network models, such as convolutional neural networks, regression neural networks, probabilistic neural networks, graph neural networks, etc. Significant experimental results of pathological cry identification and classification are listed for comparison. Finally, it suggests future research in the direction of database preparation, feature analysis and extraction, neural network classifiers to provide a non-invasive and robust automatic infant cry analysis model.

Stratum Corneum Hydration Measurements with a Bluetooth Wireless Probe: A Real-Life Study at Home Compared to Measurements under Laboratory Conditions.

INTRODUCTION: Non-invasive measurement of the stratum corneum hydration (SCH) with capacitance-based instrumentation is established in dermatological and cosmetic studies. We wanted to test the reliability of non-invasive self-measurements for SCH performed under real-life conditions by volunteers with a Bluetooth-based (wireless) probe Corneometer® (CM 825i) transmitting the data via a smartphone application to a central server. Probes and smartphones communicated using Bluetooth Low Energy. Data from the smartphone were securely transferred to a remote server in a different country with TLS encryption using HTTPS protocols. CM 825i values were correlated with the established CM 825 under laboratory conditions. The primary endpoint was the correlation of the two probes. Secondary endpoints were the coefficient of variation (CV) and delta values (before and after treatment). METHODS: Eighteen healthy volunteers (f: 8; m: 10) participated in the prospective observational study. The real-world home use of the wireless CM 825i was performed before and after treatments with base cream DAC for 7 days. RESULTS: Both instruments showed a significant and relevant correlation (p < 0.0001; Spearman coefficient of r = 0.8647). CM 825i and CM 825 differentiate significantly between normal and high SCH. Both devices showed comparable robustness in repeated measurements with a CV between 5.6% and 9.2%. CONCLUSION: We could show a significant correlation between both devices and a comparable differentiation between low and high SCH and comparable CVs. The real-life use demonstrated adequate acquiring and transmitting of in vivo data to a smartphone and subsequently transmitting to the secure server with low numbers of missed transmissions (<0.2%) and missed measurements (<5%).

Improved Data Acquisition Settings on Q Exactive HF-X and Fusion Lumos Tribrid Orbitrap-Based Mass Spectrometers for Proteomic Analysis of Limited Samples.

Deep proteomic profiling of complex biological and medical samples available at low nanogram and subnanogram levels is still challenging. Thorough optimization of settings, parameters, and conditions in nanoflow liquid chromatography-tandem mass spectrometry (MS)-based proteomic profiling is crucial for generating informative data using amount-limited samples. This study demonstrates that by adjusting selected instrument parameters, e.g., ion injection time, automated gain control, and minimally altering the conditions for resuspending or storing the sample in solvents of different compositions, up to 15-fold more thorough proteomic profiling can be achieved compared to conventionally used settings. More specifically, the analysis of 1 ng of the HeLa protein digest standard by Q Exactive HF-X Hybrid Quadrupole-Orbitrap and Orbitrap Fusion Lumos Tribrid mass spectrometers yielded an increase from 1758 to 5477 (3-fold) and 281 to 4276 (15-fold) peptides, respectively, demonstrating that higher protein identification results can be obtained using the optimized methods. While the instruments applied in this study do not belong to the latest generation of mass spectrometers, they are broadly used worldwide, which makes the guidelines for improving performance desirable to a wide range of proteomics practitioners.

Machine learning for hand pose classification from phasic and tonic EMG signals during bimanual activities in virtual reality.

Myoelectric prostheses have recently shown significant promise for restoring hand function in individuals with upper limb loss or deficiencies, driven by advances in machine learning and increasingly accessible bioelectrical signal acquisition devices. Here, we first introduce and validate a novel experimental paradigm using a virtual reality headset equipped with hand-tracking capabilities to facilitate the recordings of synchronized EMG signals and hand pose estimation. Using both the phasic and tonic EMG components of data acquired through the proposed paradigm, we compare hand gesture classification pipelines based on standard signal processing features, convolutional neural networks, and covariance matrices with Riemannian geometry computed from raw or xDAWN-filtered EMG signals. We demonstrate the performance of the latter for gesture classification using EMG signals. We further hypothesize that introducing physiological knowledge in machine learning models will enhance their performances, leading to better myoelectric prosthesis control. We demonstrate the potential of this approach by using the neurophysiological integration of the "move command" to better separate the phasic and tonic components of the EMG signals, significantly improving the performance of sustained posture recognition. These results pave the way for the development of new cutting-edge machine learning techniques, likely refined by neurophysiology, that will further improve the decoding of real-time natural gestures and, ultimately, the control of myoelectric prostheses.

A Wireless Data Acquisition System Based on MEMS Accelerometers for Operational Modal Analysis of Bridges.

This paper illustrates a novel and cost-effective wireless monitoring system specifically developed for operational modal analysis of bridges. The system employs battery-powered wireless sensors based on MEMS accelerometers that dynamically balance power consumption with high processing features and a low-power, low-cost Wi-Fi module that ensures operation for at least five years. The paper focuses on the system's characteristics, stressing the challenges of wireless communication, such as data preprocessing, synchronization, system lifetime, and simple configurability, achieved through the integration of a user-friendly, web-based graphical user interface. The system's performance is validated by a lateral excitation test of a model structure, employing dynamic identification techniques, further verified through FEM modeling. Later, a system composed of 30 sensors was installed on a concrete arch bridge for continuous OMA to assess its behavior. Furthermore, emphasizing its versatility and effectiveness, displacement is estimated by employing conventional and an alternative strategy based on the Kalman filter.

Development of a Time Projection Chamber Readout with Hybrid Pixel Sensors for Beam Monitoring.

To monitor the position and profile of therapeutic carbon beams in real-time, in this paper, we proposed a system called HiBeam-T. The HiBeam-T is a time projection chamber (TPC) with forty Topmetal-II- CMOS pixel sensors as its readout. Each Topmetal-II- has 72 × 72 pixels with the size of 83 µm × 83 µm. The detector consists of the charge drift region and the charge collection area. The readout electronics comprise three Readout Control Modules and one Clock Synchronization Module. This Hibeam-T has a sensitive area of 20 × 20 cm and can acquire the center of the incident beams. The test with a continuous 80.55 MeV/u 12C6+ beam shows that the measurement resolution to the beam center could reach 6.45 µm for unsaturated beam projections.

Smart Sensor-Based Monitoring Technology for Machinery Fault Detection.

Rotary machines commonly use rolling element bearings to support rotation of the shafts. Most machine performance imperfections are related to bearing defects. Thus, reliable bearing condition monitoring systems are critically needed in industries to provide early warning of bearing fault so as to prevent machine performance degradation and reduce maintenance costs. The objective of this paper is to develop a smart monitoring system for real-time bearing fault detection and diagnostics. Firstly, a smart sensor-based data acquisition (DAQ) system is developed for wireless vibration signal collection. Secondly, a modified variational mode decomposition (MVMD) technique is proposed for nonstationary signal analysis and bearing fault detection. The proposed MVMD technique has several processing steps: (1) the signal is decomposed into a series of intrinsic mode functions (IMFs); (2) a correlation kurtosis method is suggested to choose the most representative IMFs and construct the analytical signal; (3) envelope spectrum analysis is performed to identify the representative features and to predict bearing fault. The effectiveness of the developed smart sensor DAQ system and the proposed MVMD technique is examined by systematic experimental tests.

Inserting Pre-analytical Chromatographic Priming Runs Significantly Improves Targeted Pathway Proteomics with Sample Multiplexing.

GoDig, a platform for targeted pathway proteomics without the need for manual assay scheduling or synthetic standards, is a powerful, flexible, and easy-to-use method that uses tandem mass tags to increase sample throughput up to 18-fold relative to label-free methods. Though the protein-level success rates of GoDig are high, the peptide-level success rates are more limited, hampering assays of harder-to-quantify proteins and site-specific phenomena. To guide the optimization of GoDig assays as well as improvements to the GoDig platform, we created GoDigViewer, a new stand-alone software that provides detailed visualizations of GoDig runs. GoDigViewer guided the implementation of "priming runs," an acquisition mode with significantly higher success rates. In this mode, two or more chromatographic priming runs are automatically performed to improve the accuracy and precision of target elution orders, followed by analytical runs which quantify targets. Using priming runs, success rates exceeded 97% for a list of 400 peptide targets and 95% for a list of 200 targets that are usually not quantified using untargeted mass spectrometry. We used priming runs to establish a quantitative assay of 125 macroautophagy proteins that had a >95% success rate and revealed differences in macroautophagy expression profiles across four human cell lines.

Autonomous Sensor System for Low-Capacity Wind Turbine Blade Vibration Measurement.

This paper presents the design, implementation, and validation of an on-blade sensor system for remote vibration measurement for low-capacity wind turbines. The autonomous sensor system was deployed on three wind turbines, with one of them operating in harsh weather conditions in the far south of Chile. The system recorded the acceleration response of the blades in the flapwise and edgewise directions, data that could be used for extracting the dynamic characteristics of the blades, information useful for damage diagnosis and prognosis. The proposed sensor system demonstrated reliable data acquisition and transmission from wind turbines in remote locations, proving the ability to create a fully autonomous system capable of recording data for monitoring and evaluating the state of health of wind turbine blades for extended periods without human intervention. The data collected by the sensor system presented in this study can serve as a foundation for developing vibration-based strategies for real-time structural health monitoring.