ABSTRACT
PURPOSE: To compare outcomes after anterior cruciate ligament reconstruction (ACLR) with bone marrow aspirate concentrate (BMAC), demineralized bone matrix (DBM), and suture tape augmentation (STA) vs. ACLR without biologic augmentation or STA. METHODS: A prospective randomized controlled trial at a single institution was performed to compare ACLR with BMAC, DBM, and STA (Group A) vs. ACLR without biologic or STA (Group NA). One hundred patients were required. Skeletally mature patients <25 years old received quadriceps tendon autografts, while patients ≥25 years old received allograft ACLR with an all-inside technique. Concomitant meniscal pathologies were included. Primary outcomes compared were range-of-motion (ROM), limb symmetry, and patient-reported outcomes (PROs). Secondary outcomes included radiographic outcomes and surgical complications. Univariate and mixed-model regression analysis were used to compare outcomes. RESULTS: Fifty-nine patients were included (Group A: 29 patients, 11 females, 38%; Group NA: 30 patients, 15 females, 50%). Early range-of-motion at 6 weeks (125° vs 109° flexion, p<0.0001) and limb symmetry testing at 12 weeks (80.6 % vs. 36.7% [Delta 43.9%], p<0.001) were significantly improved in Group A. At two years, International Knee Documentation (IKDC) scores were similar (91.1 ± 12.7 vs. 85.3 ± 10.8, p=0.109). Knee Injury and Osteoarthritis and Outcome Score (KOOS) Quality of Life (QOL) scores were significantly enhanced in Group A (85.2 ± 20.9 vs. 72.1 ± 20.4, p=0.042). Twenty-two patients (12 Group A, 10 Group NA) underwent CT scans at 6-months to compare bone tunnel healing. Overall, the mean increase in bone tunnel diameter was significantly smaller in Group A vs. NA. No difference in graft re-ruptures or re-operations was observed. Seven of 59 patients (11.9%) underwent re-operation for stiffness (A: 3 (10%) vs. NA: 4 (13%), p=1.0). CONCLUSION: There were no differences in IKDC scores between groups at 2-year follow-up. Functional outcomes including early range-of-motion and limb symmetry were significantly improved in patients who received ACLR with BMAC, DBM, and STA. ACLRACLR.ACLR.
ABSTRACT
Clinical orthopedics continuously aims to improve methods for bone formation. Clinical applications where bone formation is necessary include critical long bone defects in orthopedic trauma or tumor patients. Though some biomaterials combined with autologous stem cells significantly improve bone repair, critical-size damages are still challenged with the suitable implantation of biomaterials and donor cell survival. Extracellular matrix (ECM) is the fundamental structure in tissues that can nest and nourish resident cells as well as support specific functions of the tissue type. ECM also plays a role in cell signaling to promote bone growth, healing and turnover. In the last decade, the use of bone-derived ECMs or ECM-similar biomaterials have been widely investigated, including decellularized and demineralized bone ECM. In this article, we reviewed the current productions and applications of decellularized and demineralized bone matrices. We also introduce the current study of whole limb decellularization and recellularization.
[Box: see text].
Subject(s)
Allografts , Bone Matrix , Humans , Animals , Orthopedics/methods , Extracellular Matrix , Bone Transplantation/methods , Tissue Engineering/methodsABSTRACT
Management of open apex cases in endodontics poses a significant challenge, especially in immature teeth with necrotic pulps. Traditional apexification techniques have been the mainstay of treatment, aiming to induce the formation of a calcific barrier at the root apex. However, newer approaches incorporating biological materials such as platelet-rich fibrin (PRF) and demineralized bone matrix (DMBM) have emerged as promising alternatives. This article presents a case report of an 18-year-old male patient who presented with fractured upper central incisors, with the upper right central incisor displaying an open apex due to trauma sustained eight years prior. The treatment plan involved apexification using a combination of DMBM and PRF, with mineral trioxide aggregate (MTA) utilized as an apical barrier. The procedure was performed under rubber dam isolation, meticulously removing necrotic pulp tissue, irrigating with sodium hypochlorite solution, and placing a calcium hydroxide medicament. Subsequent visits included the placement of DMBM and PRF mixture into the canal space to create an apical barrier, followed by MTA placement and final restoration. Follow-up examinations at 3 and 12 months revealed the tooth to be asymptomatic and functionally normal, with radiographic evidence of osseous repair and complete apical closure. This case underscores the efficacy of a multimodal approach utilizing DMBM, PRF, and MTA in successfully managing open apex cases. Further research and long-term follow-up studies are warranted to validate this treatment modality's predictability and long-term success.
ABSTRACT
Bone is remodeled through a dynamic process facilitated by biophysical cues that support cellular signaling. In healthy bone, signaling pathways are regulated by cells and the extracellular matrix and transmitted via electrical synapses. To this end, combining electrical stimulation (ES) with conductive scaffolding is a promising approach for repairing damaged bone tissue. Therefore, "smart" biomaterials that can provide multifunctionality and facilitate the transfer of electrical cues directly to cells have become increasingly more studied in bone tissue engineering. Herein, 3D-printed electrically conductive composite scaffolds consisting of demineralized bone matrix (DBM) and polycaprolactone (PCL), in combination with ES, for bone regeneration were evaluated for the first time. The conductive composite scaffolds were fabricated and characterized by evaluating mechanical, surface, and electrical properties. The DBM/PCL composites exhibited a higher compressive modulus (107.2 MPa) than that of pristine PCL (62.02 MPa), as well as improved surface properties (i.e., roughness). Scaffold electrical properties were also tuned, with sheet resistance values as low as 4.77 × 105 Ω/sq for our experimental coating of the highest dilution (i.e., 20%). Furthermore, the biocompatibility and osteogenic potential of the conductive composite scaffolds were tested using human mesenchymal stromal cells (hMSCs) both with and without exogenous ES (100 mV/mm for 5 min/day four times/week). In conjunction with ES, the osteogenic differentiation of hMSCs grown on conductive DBM/PCL composite scaffolds was significantly enhanced when compared to those cultured on PCL-only and nonconductive DBM/PCL control scaffolds, as determined through xylenol orange mineral staining and osteogenic protein analysis. Overall, these promising results suggest the potential of this approach for the development of biomimetic hybrid scaffolds for bone tissue engineering applications.
Subject(s)
Biocompatible Materials , Bone Matrix , Electric Stimulation , Materials Testing , Printing, Three-Dimensional , Tissue Engineering , Tissue Scaffolds , Tissue Scaffolds/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Humans , Bone Matrix/chemistry , Electric Conductivity , Polyesters/chemistry , Osteogenesis , Particle Size , Mesenchymal Stem Cells/cytologyABSTRACT
There is concern for cementless total knee arthroplasty (TKA) in patients with decreased bone mineral density (BMD) due to the potential increase in complications, namely failed in-growth or future aseptic loosening. Some data suggest that advances in cementless prostheses mitigate these risks; however this is not yet born out in long-term registry data. It is crucial to expand our understanding of the prevalence and etiology of osteoporosis in TKA patients, survivorship of cementless implants in decreased BMD, role of bone-modifying agents, indications and technical considerations for cementless TKA in patients with decreased BMD. The purpose of this study is to review current literature and expert opinion on such topics.
Subject(s)
Arthroplasty, Replacement, Knee , Bone Density , Osteoporosis , Humans , Arthroplasty, Replacement, Knee/methods , Arthroplasty, Replacement, Knee/adverse effects , Osteoporosis/complications , Knee Prosthesis/adverse effects , Prosthesis Failure , Prosthesis DesignABSTRACT
Although a demineralized bone matrix (DBM) is often used as an alternative to an autologous bone graft, its clinical application is still hampered by easy dispersion of DBM particles and insufficient osteoinductivity in the defect site. Herein, we designed a self-healing hydrogel for DBM that can rapidly restore its structural integrity after damage based on amino-rich black phosphorus (BP) nanosheets and aldehyde-functionalized hyaluronic acid (AHA). Given the increased expression of bone morphogenetic protein (BMP) antagonists by DBM stimulation, the osteogenic potency of DBM in the hydrogel carrier was further enhanced by abrogating the BMP antagonism. The BP/AHA hydrogel provided dynamic polymer-nanosheet networks that combine injectability, modability, and physical stability with high DBM loading, where the BP nanosheets served as osteogenic cross-linkers to promote biomineralization and deliver siRNA to suppress undesirable expression of BMP antagonist noggin by DBM. As a result, the BP/AHA hydrogel integrated with DBM and noggin-targeting siRNA synergistically promoted osteogenic differentiation of mesenchymal stem cells by enhancing BMP/Smad signaling. This work demonstrates a promising strategy to improve the efficacy of bone regeneration using bone graft.
ABSTRACT
OBJECTIVES: Demineralized bone matrix (DBM) is a well-established bone graft material widely accepted by dentists and the public for its favorable osteoconductivity and osteoinductive potential. This article aimed to provide a narrative review of the current therapeutic applications and limitations of DBM in maxillofacial bone defects. STUDY SELECTION, DATA, AND SOURCES: Randomized controlled trials, prospective or retrospective clinical studies, case series and reports, and systematic reviews. MEDLINE, PubMed, and Google Scholar were searched using keywords. CONCLUSIONS: Some evidence supported the therapeutic application of DBM in periodontal intrabony defects, maxillary sinus lifts, ridge preservation, ridge augmentation, alveolar cleft repair, orthognathic surgery, and other regional maxillofacial bone defects. However, the limitations of DBM should be considered when using it, including potential low immunogenicity, instability of osteoinductive potential, handling of the graft material, and patient acceptance. CLINICAL SIGNIFICANCE: With the increasing demand for the treatment of maxillofacial bone defects, DBM is likely to play a greater role as a promising bone graft material. Safe and effective combination treatment strategies and how to maintain a stable osteoinductive potential will be the future challenges of DBM research.
Subject(s)
Bone Matrix , Bone Regeneration , Humans , Bone Matrix/transplantation , Prospective Studies , Retrospective Studies , Treatment Outcome , Bone TransplantationABSTRACT
Demineralized bone matrix (DBM) has been regarded as an ideal bone substitute as a native carrier of bone morphogenetic proteins (BMPs) and other growth factors. However, the osteoinductive properties diverse in different DBM products. We speculate that the harvest origin further contributing to variability of BMPs contents in DBM products besides the process technology. In the study, the cortical bone of femur, tibia, humerus, and ulna from a signal donor were prepared and followed demineralizd into DBM products. Proteins in bone martix were extracted using guanidine-HCl and collagenase, respectively, and BMP-2 content was detected by sandwich enzyme-linked immunosorbent assay (ELISA). Variability of BMP-2 content was found in 4 different DBM products. By guanidine-HCl extraction, the average concentration in DBMs harvested from ulna, humerus, tibia, and femur were 0.613 ± 0.053, 0.848 ± 0.051, 3.293 ± 0.268, and 21.763 ± 0.344, respectively (p < 0.05), while using collagenase, the levels were 0.089 ± 0.004, 0.097 ± 0.004, 0.330 ± 0.012, and 1.562 ± 0.008, respectively (p < 0.05). In general, the content of BMP-2 in long bones of Lower limb was higher than that in long bones of upper limb, and GuHCl had remarkably superior extracted efficiency for BMP-2 compared to collagenase. The results suggest that the origin of cortical bones harvested to fabricate DBM products contribute to the variability of native BMP-2 content, while the protein extracted method only changes the measured values of BMP-2.
Subject(s)
Bone Matrix , Bone Morphogenetic Protein 2 , Bone Morphogenetic Protein 2/analysis , Bone Morphogenetic Protein 2/metabolism , Humans , Bone Matrix/chemistry , Bone Demineralization Technique , Bone and Bones/chemistryABSTRACT
A 17-month-old domestic short-hair cat was referred due to a non-union in the left tibia. The initial repair, conducted 3 months prior at another animal hospital, involved an intramedullary (IM) pin and wire to address a comminuted fracture. Unfortunately, the wire knot caused a skin tract, resulting in osteomyelitis. Although the wire knot was removed at that hospital, the draining tract persisted, continuously discharging exudate. Upon evaluation, the first surgery was reassessed and revised, involving the removal of the IM pin and the application of external skeletal fixation alongside an antibiotic susceptibility test. After 118 days post-revision surgery, while some cortical continuity was observed, a significant bone defect persisted, posing a substantial risk of refracture should the implant be removed. A second revision surgery was performed, utilizing a bone plate combined with cancellous bone autograft, recombinant human bone morphogenetic protein-2, and xenograft featuring a canine-derived cancellous chip mixed with demineralized bone matrix. Remarkably, the bone completed its healing within 105 days following the subsequent surgery. Radiography demonstrated successful management of the large bone defect up to the 2-year postoperative check-up. During telephone follow-ups for 3.5 years after surgery, no complications were identified, and the subject maintained a favorable gait.
ABSTRACT
STUDY DESIGN: Systematic literature review. OBJECTIVES: To analyze the evidence available reporting complications in single or two-level anterior cervical discectomy and fusion (ACDF) using a demineralized bone matrix (DBM), hydroxyapatite (HA), or beta-tricalcium phosphate (ß-TCP). METHODS: A systematic review of the literature using PubMed, EMBASE, Cochrane Library, and ClinicalTrials.gov databases was performed in August 2020 to identify studies reporting complications in one or two-level ACDF surgery using DBM, HA, or ß-TCP. The study was reported following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. RESULTS: A total of 1857 patients were included, 981 male and 876 female, across 17 articles; 5 prospective, and 12 retrospectives. We noted heterogeneity among the included studies concerning the study design and combination of graft materials utilized in them. However, we noted a higher incidence of adjacent segment disease (17.7%) and pseudoarthrosis (9.3%) in fusion constructs using DBM. Studies using ß-TCP reported a higher incidence of pseudoarthrosis (28.2%) and implant failures (17.9%). CONCLUSIONS: Degenerative cervical conditions treated with one or two-level ACDF surgery using DBM, HA, or ß-TCP with or without cervical plating are associated with complications such as adjacent segment disease, dysphagia, and pseudarthrosis. However, consequent to the study designs and clinical heterogeneity of the studies, it is not possible to correlate these complications accurately with any specific graft material employed. Further well-designed prospective studies are needed to correctly know the related morbidity of each graft used for achieving fusion in ACDF.
ABSTRACT
STUDY DESIGN: Systematic literature review. OBJECTIVES: In this study we assessed evidence for the use of osteobiologics in single vs multi-level anterior cervical discectomy and fusion (ACDF) in patients with cervical spine degeneration. The primary objective was to compare fusion rates after single and multi-level surgery with different osteobiologics. Secondary objectives were to compare differences in patient reported outcome measures (PROMs) and complications. METHODS: After a global team of reviewers was selected, a systematic review using different repositories was performed, confirming to PRISMA and GRADE guidelines. In total 1206 articles were identified and after applying inclusion and exclusion criteria, 11 articles were eligible for analysis. Extracted data included fusion rates, definition of fusion, patient reported outcome measures, types of osteobiologics used, complications, adverse events and revisions. RESULTS: Fusion rates ranged from 87.7% to 100% for bone morphogenetic protein 2 (BMP-2) and 88.6% to 94.7% for demineralized bone matrix, while fusion rates reported for other osteobiologics were lower. All included studies showed PROMs improved significantly for each osteobiologic. However, no differences were reported when comparing osteobiologics, or when comparing single vs multi-level surgery specifically. CONCLUSION: The highest fusion rates after 2-level ACDF for cervical spine degeneration were reported when BMP-2 was used. However, PROMs did not differ between the different osteobiologics. Further blinded randomized trials should be performed to compare the use of BMP-2 in single vs multi-level ACDF specifically.
ABSTRACT
Background and Objectives: Posterior lumbar interbody fusion (PLIF) plays a crucial role in addressing various spinal disorders. The success of PLIF is contingent upon achieving bone fusion, as failure can lead to adverse clinical outcomes. Demineralized bone matrix (DBM) has emerged as a promising solution for promoting fusion due to its unique combination of osteoinductive and osteoconductive properties. This study aims to compare the effectiveness of three distinct DBMs (Exfuse®, Bongener®, and Bonfuse®) in achieving fusion rates in PLIF surgery. Materials and Methods: A retrospective review was conducted on 236 consecutive patients undergoing PLIF between September 2016 and February 2019. Patients over 50 years old with degenerative lumbar disease, receiving DBM, and following up for more than 12 months after surgery were included. Fusion was evaluated using the Bridwell grading system. Bridwell grades 1 and 2 were defined as 'fusion', while grades 3 and 4 were considered 'non-fusion.' Clinical outcomes were assessed using visual analog scale (VAS) scores for pain, the Oswestry disability index (ODI), and the European quality of life-5 (EQ-5D). Results: Fusion rates were 88.3% for Exfuse, 94.3% for Bongener, and 87.7% for Bonfuse, with no significant differences. All groups exhibited significant improvement in clinical outcomes at 12 months after surgery, but no significant differences were observed among the three groups. Conclusions: There were no significant differences in fusion rates and clinical outcomes among Exfuse, Bongener, and Bonfuse in PLIF surgery.
Subject(s)
Spinal Diseases , Spinal Fusion , Humans , Middle Aged , Bone Matrix , Quality of Life , Lumbar Vertebrae/surgery , Retrospective Studies , Treatment OutcomeABSTRACT
This study examined the effectiveness of coating demineralized bone matrix (DBM) with amorphous calcium phosphate (DBM + CaP), as well as a composite of DBM, calcium phosphate, and serum albumin (DBM + CaP + BSA). The intact structure of DBM promotes the transformation of amorphous calcium phosphate (CaP) into dicalcium phosphate dihydrate (DCPD) with a characteristic plate shape and particle size of 5-35 µm. The inclusion of BSA in the coating resulted in a better and more uniform distribution of CaP on the surface of DBM trabeculae. MG63 cells showed that both the obtained forms of CaP and its complex with BSA did not exhibit cytotoxicity up to a concentration of 10 mg/mL in vitro. Ectopic (subcutaneous) implantation in rats revealed pronounced biocompatibility, as well as strong osteoconductive, osteoinductive, and osteogenic effects for both DBM + CaP and DBM + CaP + BSA, but more pronounced effects for DBM + CaP + BSA. In addition, for the DBM + CaP + BSA samples, there was a pronounced full physiological intrafibrillar biomineralization and proangiogenic effect with the formation of bone-morrow-like niches, accompanied by pronounced processes of intramedullary hematopoiesis, indicating a powerful osteogenic effect of this composite.
ABSTRACT
Demineralized bone matrix (DBM) has been widely used as an allogeneic alternative to autologous bone graft for bone repair. However, more extensive use of DBM is limited due to its particulate nature after demineralization and rapid particle dispersion following irrigation, resulting in unpredictable osteoinductivity. Here, a new design of injectable hydrogel carriers for DBM that combine self-healing ability and osteogenic properties based on the self-assembly of guanidinylated hyaluronic acid and silica-rich nanoclays is reported. The nanoclays serve as reversible linkages to form a dynamic hydrogel network with the guanidine moieties on the polymer chains. Gelation kinetics and mechanical properties can be controlled by altering nanoclay content in the hydrogel. The resulting hydrogel exerts self-healing ability due to its dynamic crosslinks and well retains its overall performance with high DBM loading. The hydrogel exhibits great cytocompatibility and osteogenic effects mediated by the nanoclays. In vivo delivery of DBM using the nanocomposite hydrogel further demonstrates robust bone regeneration in a mouse calvarial defect model in comparison to DBM delivered with aqueous HA. This work suggests a promising hydrogel platform for many applications including therapeutic delivery and tissue engineering.
Subject(s)
Bone Matrix , Bone and Bones , Mice , Animals , Nanogels , Hydrogels/pharmacology , OsteogenesisABSTRACT
Allogenic demineralized bone matrix (DBM), processed to expose bioactive proteins imbedded by calcium salts, is widely used for bone repair and regeneration as an alternative to the autologous bone graft. However, demineralized bone matrices from tissue banks vary significantly in residual calcium content and osteogenicity for clinical bone regeneration. The present study produced DBM with various residual calcium contents by partial demineralization using ethylenediaminetetraacetic acid disodium (EDTA) and hydrochloric acid. Compositional analysis reveals that, as the percent weight loss of bone materials increases from 0% to 74.9% during demineralization, the residual calcium content of DBM decreases from 24.8% to 0.2% and collagen content increases from 29.7% to 92.6%. Calorimetrical analysis and Fourier transform infrared (FTIR) analysis demonstrated that demineralization to the residual calcium content of <4% enables the complete exposure and/or release of bone collagen fibers and other bioactive molecules. In order to evaluate the relationship between the extent of demineralization and the osteogenicity of DBM, DBM particles were fabricated with the aid of acellular dermal matrix (ADM) microfibers to form flexible foam-like DBM/ADM composites. Proteomic analysis identified various type collagens and bone formation-related bioactive molecules in both ADM and DBM. Using the rat bilateral Φ = 5 mm calvarium defect repair model, the study had shown that the DBM/ADM composite with ~20% DBM residual calcium (e.g., ~40% calcium being removed) maximized the osteogenicity for bone defect repair after 4 and 8 weeks. DBM with ~40% calcium removal had the maximal osteogenicity presumably through the sustained release of bioactive molecules during the process of bone regeneration.
Subject(s)
Calcium , Osteogenesis , Animals , Rats , Calcium/pharmacology , Delayed-Action Preparations/pharmacology , Proteomics , Collagen/pharmacologyABSTRACT
Formation of bony fusion after arthrodesis depends on osteoinduction, osteoconduction, and osteogenesis. Traditionally, the patient's own bone, or autograft, has been used to provide biological material necessary for these steps. However, the amount of autograft obtainable is often inadequate. Modern spine surgery has adopted the use of many autograft extenders or replacements, such as demineralized bone matrix or fibers. The present article covers the history of bone grafting, the production and technical details of demineralized bone matrix, and the evidence supporting its use in spine fusions.
ABSTRACT
Demineralized bone matrix (DBM) has been widely used clinically for dental, craniofacial and skeletal bone repair, as an osteoinductive and osteoconductive material. 3D printing (3DP) enables the creation of bone tissue engineering scaffolds with complex geometries and porosity. Photoreactive methacryloylated gelatin nanoparticles (GNP-MAs) 3DP inks have been developed, which display gel-like behavior for high print fidelity and are capable of post-printing photocrosslinking for control of scaffold swelling and degradation. Here, novel DBM nanoparticles (DBM-NPs, â¼400 nm) were fabricated and characterized prior to incorporation in 3DP inks. The objectives of this study were to determine how these DBM-NPs would influence the printability of composite colloidal 3DP inks, assess the impact of ultraviolet (UV) crosslinking on 3DP scaffold swelling and degradation and evaluate the osteogenic potential of DBM-NP-containing composite colloidal scaffolds. The addition of methacryloylated DBM-NPs (DBM-NP-MAs) to composite colloidal inks (100:0, 95:5 and 75:25 GNP-MA:DBM-NP-MA) did not significantly impact the rheological properties associated with printability, such as viscosity and shear recovery or photocrosslinking. UV crosslinking with a UV dosage of 3 J/cm2 directly impacted the rate of 3DP scaffold swelling for all GNP-MA:DBM-NP-MA ratios with an â¼40% greater increase in scaffold area and pore area in uncrosslinked versus photocrosslinked scaffolds over 21 days in phosphate-buffered saline (PBS). Likewise, degradation (hydrolytic and enzymatic) over 21 days for all DBM-NP-MA content groups was significantly decreased, â¼45% less in PBS and collagenase-containing PBS, in UV-crosslinked versus uncrosslinked groups. The incorporation of DBM-NP-MAs into scaffolds decreased mass loss compared to GNP-MA-only scaffolds during collagenase degradation. An in vitro osteogenic study with bone marrow-derived mesenchymal stem cells demonstrated osteoconductive properties of 3DP scaffolds for the DBM-NP-MA contents examined. The creation of photoreactive DBM-NP-MAs and their application in 3DP provide a platform for the development of ECM-derived colloidal materials and tailored control of biochemical cue presentation with broad tissue engineering applications.
ABSTRACT
Objective: This study aims to determine the optimal dose of recombinant-human Bone Morphogenic Protein-2 (rhBMP-2) for successful bone fusion in minimally invasive Lateral Lumbar Interbody Fusion (MIS LLIF). Previous studies show that rh-BMP is an effective alternative to autologous iliac crest bone graft, but the optimal dose remains uncertain. The study analyzes the fusion rates associated with different rh-BMP doses to provide a recommendation for the optimal dose in MIS LLIF. Methods: 93 patients underwent MIS LLIF using demineralized bone matrix (DBM) or a mixture of rhBMP-2 and DBM as fusion material. The group was divided into the following three groups according to the rhBMP-2 usage. Group A (only DBM was used, n: 27). Group B (1mg of rhBMP-2 per 5cc of DBM paste, n: 41). Group C (2mg of rhBMP-2 per 5cc of DBM paste, n: 25). Demographic data, clinical outcomes, postoperative complication and fusion were assessed. Results: At 12 months post-surgery, the overall fusion rate was 92.3% according to Bridwell fusion grading system. Group B and C, who received rhBMP-2, had significantly higher fusion rates than group A, who received only DBM. However, there was no significant increase in fusion rate when the rhBMP-2 dosage was increased from group B to group C. The group B and C showed significant improvement in back pain and ODI compared to the group A. The incidence of screw loosening was decreased in group B and C, but there was no significant difference in the occurrence of other complications. Conclusion: Usage of rhBMP-2 in LLIF surgery leads to early and increased final fusion rates, which can result in faster pain relief and return to daily activities for patients. The benefits of using rhBMP-2 were not significantly different between the groups that received 1mg/5cc and 2mg/5cc of rhBMP-2. Therefore, it is recommended to use 1mg of rhBMP-2 with 5cc of DBM, taking both economic and clinical aspects into consideration.
ABSTRACT
This comparative study investigated the tissue regeneration and inflammatory response induced by xenografts comprised of hydroxyapatite (HA) and demineralized bone matrix (DBM) extracted from porcine (P) and bovine (B) sources. First, extraction of HA and DBM was independently conducted, followed by chemical and morphological characterization. Second, mixtures of HA/DBM were prepared in 50/50 and 60/40 concentrations, and the chemical, morphological, and mechanical properties were evaluated. A rat calvarial defect model was used to evaluate the tissue regeneration and inflammatory responses at 3 and 6 months. The commercial allograft DBM Puros® was used as a clinical reference. Different variables related to tissue regeneration were evaluated, including tissue thickness regeneration (%), amount of regenerated bone area (%), and amount of regenerated collagen area (%). The inflammatory response was evaluated by quantifying the blood vessel area. Overall, tissue regeneration from porcine grafts was superior to bovine. After 3 months of implantation, the tissue thickness regeneration in the 50/50P compound and the commercial DBM was significantly higher (~99%) than in the bovine materials (~23%). The 50/50P and DBM produced higher tissue regeneration than the naturally healed controls. Similar trends were observed for the regenerated bone and collagen areas. The blood vessel area was correlated with tissue regeneration in the first 3 months of evaluation. After 6 months of implantation, HA/DBM compounds showed less regenerated collagen than the DBM-only xenografts. In addition, all animal-derived xenografts improved tissue regeneration compared with the naturally healed defects. No clinical complications associated with any implanted compound were noted.
ABSTRACT
High efficiency of hybrid implants based on calcium-magnesium silicate ceramic, diopside, as a carrier of recombinant BMP-2 and xenogenic demineralized bone matrix (DBM) as a scaffold for bone tissue regeneration was demonstrated previously using the model of critical size cranial defects in mice. In order to investigate the possibility of using these implants for growing autologous bone tissue using in vivo bioreactor principle in the patient's own body, effectiveness of ectopic osteogenesis induced by them in intramuscular implantation in mice was studied. At the dose of 7 µg of BMP-2 per implant, dense agglomeration of cells, probably skeletal muscle satellite precursor cells, was observed one week after implantation with areas of intense chondrogenesis, initial stage of indirect osteogenesis, around the implants. After 12 weeks, a dense bone capsule of trabecular structure was formed covered with periosteum and mature bone marrow located in the spaces between the trabeculae. The capsule volume was about 8-10 times the volume of the original implant. There were practically no signs of inflammation and foreign body reaction. Microcomputed tomography data showed significant increase of the relative bone volume, number of trabeculae, and bone tissue density in the group of mice with BMP-2-containing implant in comparison with the group without BMP-2. Considering that DBM can be obtained in practically unlimited quantities with required size and shape, and that BMP-2 is obtained by synthesis in E. coli cells and is relatively inexpensive, further development of the in vivo bioreactor model based on the hybrid implants constructed from BMP-2, diopside, and xenogenic DBM seems promising.