Impact of malocclusion and oral habits on oral health-related quality of life and sleep disturbance in young adults : A cross-sectional study.

PURPOSE: The aim of this study was to investigate the impact of malocclusion and oral habits on oral health-related quality of life and sleep disturbance in young adults. METHODS: A cross-sectional study was conducted with a sample of 213 young adults aged 18-30 years. Dental occlusion data were assessed through clinical examination. A questionnaire was used to collect data on oral habits. Outcomes were collected using the Oral Health Impact Profile (OHIP-14) and Mini Sleep Questionnaire. RESULTS: Anterior open bite (adjusted odds ratio [OR] = 2.41, 95% confidence interval [CI] = 1.02-5.67, p = 0.044), swallowing disorders (adjusted OR = 2.39, 95% CI = 1.13-5.05, p = 0.022), and sleeping on hands were associated with a negative impact on oral health-related quality of life. Females (adjusted OR = 2.61, 95% CI = 1.10-6.17, p = 0.029), teeth grinding (adjusted OR = 2.78, 95% CI = 1.08-7.14, p = 0.034), biting lips or cheeks (adjusted OR = 4.28, 95% CI = 1.49-12.29, p = 0.007), and self-perception of need for orthodontic treatment (adjusted OR = 7.88, 95% CI = 2.12-29.30, p = 0.002) were associated as a risk for sleep disturbances. CONCLUSION: The findings suggest that oral habits and some types of malocclusions can impact oral health-related quality of life. In addition, sleep disturbances were associated with a greater need for orthodontic treatment and a habit of grinding teeth in young adults.

Comparison of full-arch mandibular reconstruction with dental implants using completely splinted or segmentally splinted prostheses with two different occlusal schemes: A finite-element analysis.

PURPOSE: This study aimed to comparatively analyze full-arch mandibular reconstruction using dental implants. It focused on two distinct prosthesis configurations: completely splinted and segmentally splinted. These configurations were evaluated under two different occlusal schemes-group function and canine guidance-utilizing finite element analysis (FEA). MATERIALS AND METHODS: The methodology involved developing three-dimensional finite element models from computed tomography data acquired from an edentulous patient. Six dental implants were utilized to complete the mandibular reconstruction. Prosthetic reconstruction was conducted with completely and segmentally splinted prostheses, each employing group function and canine guidance occlusal schemes. Consequently, four distinct models were analyzed. Following meshing, a 200 N load was applied at a 30-degree angle. Subsequent evaluation encompassed stress, strain distribution, and the overall deformation of the implants, crowns, and underlying bone structure assessment. RESULTS: The group function occlusal scheme generally exhibited lower stress values than the canine guidance occlusal scheme, with three-piece prostheses demonstrating even lower stress levels than one-piece prostheses. Conversely, the canine guidance occlusal scheme exhibited higher stress values overall. CONCLUSION: The findings of this study may assist clinicians in selecting the most effective occlusal scheme and prosthetic configuration for implant-supported mandibular restorations, potentially enhancing treatment outcomes and reducing the risk of mechanical complications. In summary, results indicated that group function loading, irrespective of prosthesis type, offers more uniform load distribution and lower stress values, making it a preferable choice over canine guidance. Within the group function occlusal scheme, three-piece prostheses demonstrated lower stress values than one-piece prostheses, but the clinical significance of this difference appears to be minimal.

Vascular Anomalies and Congenital Infiltrating Lipomatosis May Affect Dental Maturation and Development - a Case Control Study.

OBJECTIVE: Vascular anomalies are often associated with hypertrophy and asymmetry of soft tissues and bony structures. The aim of this retrospective cross-sectional radiographic study was to evaluate dental maturation and development in patients with facial vascular anomalies and congenital infiltrating lipomatosis. DESIGN: A sample of 342 patients with different vascular anomalies or congenital infiltrating lipomatosis involving the head and neck area was narrowed down to 31 patients with dental panoramic radiographs taken in the mixed dentition. A control group of 172 age-matched healthy subjects was used. Individual permanent teeth were given a maturation score from 1 to 12 and alveolar eruption stage according to Haavikko et al. 1970. The laterality of the anomaly was noted if applicable. Differences in dental development between affected and unaffected sides were recorded. RESULTS: The study data included both syndromic and non-syndromic vascular anomalies as well as congenital infiltrating lipomatosis and segmental odontomaxillary dysplasia. Teeth on the side of the anomaly were more developed and the eruption of teeth was accelerated with canines, premolars and second molars being most affected. Interestingly all the patients with Sturge-Weber syndrome (n = 4) and infiltrating lipomatosis (n = 2) showed accelerated dental maturation of multiple permanent teeth on the side of the anomaly. Hypodontia, dental root resorption and macrodontia were also found. CONCLUSIONS: Accelerated development and eruption of permanent teeth unilaterally in patients with vascular anomalies and congenital infiltrating lipomatosis may have a significant impact on the developing occlusion and should be thus followed by an orthodontist.

Occlusal Plane, Mandibular Position and Dentoalveolar Changes during the Orthodontic Treatment with the Use of Mini-Screws.

This study aimed to describe the changes produced on the occlusal plane (OP), the mandibular position and the dentoalveolar compensations of patients with distalization of the maxillary/mandibular arch assisted by mini-screws (MS). A descriptive case-series study was performed using the digital lateral cephalograms (DLC) of nine patients who underwent orthodontic treatment and required the use of MS for a complete distalization of the maxillary/mandibular arch. Records were collected at three different times (T1-T2-T3) and digitally analyzed (variables: Skeletal diagnosis; maxillary occlusal plane; position of the maxilla/mandible; and dentoalveolar changes of the distalization arch tracing the longitudinal axis of incisors/molars regarding the palatal/mandibular plane). Findings show that the OP varied from T1-T2-T3 in all cases, indicating its stepping or flattening. ODI, APDI, SNA, SNB, and ANB changed minimally in all cases, without variations in the mandibular position or in the skeletal diagnosis. Dentoalveolar measurements also showed differences between T1-T2-T3. In summary, conventional orthodontic treatment modified the OP during the first phase of treatment. Moreover, the distalization mechanics with MS changed the OP and produced dentoalveolar changes, mainly in the inclination of incisors and molars. Other measures considered in the study did not change substantially.

Association of Malocclusion with Temporomandibular Disorders: A Cross-Sectional Study.

Background/Objectives: Temporomandibular disorders (TMD) encompass a range of musculoskeletal and neuromuscular conditions affecting the temporomandibular joint (TMJ) and associated structures. This cross-sectional study, conducted in a Portuguese TMD department, aimed to assess the relationship between malocclusion and TMD severity. Methods: Data on demographic variables, TMD clinical symptoms, and malocclusion classes were collected using the EUROTMJ database. The Chi-square test (χ2) identified associations, with their intensity measured by Cramér's V (φc). Results: The study included 1170 patients (932 females and 238 males), with a mean age of 41.73 ± 16.80 years. Most patients exhibited Angle Class I malocclusion (85.5%), followed by Angle Class II (13.5%) and Angle Class III (1.1%). Class II malocclusion was associated with increased TMD severity (p < 0.001), higher myalgia levels (p = 0.002), more frequent disc displacement without reduction (p = 0.002) and lower maximum mouth opening values (Class II: 38.13 ± 7.78 mm, Class I: 39.93 ± 8.67 mm). Significant associations were also found between malocclusion type and arthralgia (p = 0.021), mouth-opening limitation (p = 0.016), and TMJ crepitus (p = 0.017). In cases of malocclusion, the presence of oral signs of bruxism explained the degree of myalgia, disc displacement, and severity (p = 0.003; p = 0.048; p = 0.045). Conclusions: This study highlights that (1) the most common type of dental malocclusion in TMD patients was Class I; (2) Class II malocclusion was associated with increased TMD severity and oral signs of bruxism; and (3) Class III was rarely observed in TMD consultation. The findings suggest that bruxism behavior in cases of malocclusion may be significant in TMD.

Malocclusion in deciduous dentition: a cross-sectional study in a Portuguese preschool population.

PURPOSE: To determine the prevalence of malocclusion in Portuguese preschool children, to characterise occlusion in the deciduous dentition, and to study the relationship between malocclusion, sex, and age. METHODS: This cross-sectional study included 3-6 years old children, from 25 randomly selected kindergartens from the Lisbon district. Data were collected through an oral examination. Malocclusion was defined as the presence of any type of occlusion anomaly (anterior crossbite, edge-to-edge, increased overjet, open bite, deep overbite, posterior crossbite, scissor bite), spacing anomaly (crowding), or dentition anomaly (supernumerary teeth, agenesis, malformations). Canine class, terminal plane of the deciduous second molars and type of Baume arch were also recorded. Statistical analysis included descriptive and chi-squared test (α = 0.05). RESULTS: The sample included 426 children with a global prevalence of malocclusion of 60.6%. Occlusion anomalies were the most prevalent (59.2%), the most frequent being deep overbite (27%), increased overjet (22.1%) and posterior crossbite (14.1%). Crowding had a prevalence of 1.6% and agenesis of 1.4%. Class I canine (57.3%), straight second molar terminal plane (60.1%) and type I Baume arch (53.3%) were the most common. The mean overjet was 2.6 mm (sd = 2.1) and the mean overbite was 2.2 mm (sd = 2.1). Age was associated with the presence of occlusion anomalies (p = 0.03), and increased overjet prevalence was found to be higher in girls (p = 0.03). CONCLUSIONS: The prevalence of malocclusion was high, with occlusion anomalies being the most prevalent. It is important to identify modifiable risk factors associated with malocclusion to prevent this condition in both the deciduous and permanent dentitions.

Reverse chewing patterns in patients with bilateral posterior crossbite are related to the occlusal features of the malocclusion.

BACKGROUND: Bilateral posterior crossbite (BPXB) is a severe malocclusion associated with maxillary hypoplasia. BPXB may involve the same or a different number of teeth between the sides. OBJECTIVES: To evaluate the masticatory function in BPXB and the association between the masticatory alterations and the occlusal features of BPXB. METHODS: This observational study included 170 participants: 130 patients with BPXB (65 occlusally symmetric BPXB, i.e. same number and type of posterior teeth in crossbite between the sides, F = 33, M = 32, median age 9.6 (8.2-13) [years.months]; 65 patients occlusally asymmetric BPXB, F = 30, M = 35, median age 9.9 (8.3-13.6)) and 40 controls (F = 25, M = 15, median age 10.2 (9.4-11.6)). The masticatory function was evaluated by the detection of the Reverse Chewing Cycles (RCCs) recorded with a kinesiograph using standardised soft and hard boluses. RESULTS: The frequency of RCCs was significantly increased in all BPXB patients compared to controls (p < .000). In symmetric BPXB patients, there were no significant differences in the frequency of RCCs during chewing on the left or the right side. In asymmetric BPXB patients, the frequency of RCCs was significantly increased during chewing on the side with relatively more teeth in crossbite (p < .000). CONCLUSIONS: The masticatory function was significantly altered in all BPXB patients and it was differently affected by symmetric or asymmetric occlusal features of the malocclusion.

The relationship of anterior occlusion and skeletal variables with the frontal sinus index: An analytical cross-sectional study.

OBJECTIVE: To determine the relationship of anterior occlusion and skeletal variables with the frontal sinus index. METHODS: The retrospective, analytical, cross-sectional, study was conducted from July to November 2020 at Dr Ishratul- Ebad Khan Institute of Oral Health Sciences and Dow Dental College, Dow University of Health Sciences, Karachi, and comprised data from 2015 to 2018 related to pre-treatment lateral cephalograms for determining frontal sinus index and other cephalometric variables. The dental casts were observed for incisor classification. Patients with Class I incisors formed the comparison group, while the rest comprised 5 malocclusion groups. The frontal sinus was traced, and the sinus index was calculated. Data was analysed using STATA 15 and R 3.5.1. RESULTS: Of the 240 subjects, there were 40(16.66%) in each of the 6 groups; 155(64.6%) females and 85(35.4%) males. The mean age of the sample was 21.33±3.52 years (range: 16-29 years). The mean sinus index was higher in all malocclusion groups than the comparison group, but it was significantly higher only in Class II division 2 and anterior open bite groups (p<0.05). The only exception to the trend was Class II division 1 with and without contact in which the value was lower (p>0.05). The anterior cranial base length, sella-nasion mandibular plane angle, and upper incisor palatal plane angle significantly affected the frontal sinus index (p<0.05). CONCLUSIONS: The frontal sinus index could be considered an indicator of harmonious anterior occlusion.

Digital-assisted multidisciplinary treatment for complex occlusal rehabilitation: an 18-month follow-up case report.

BACKGROUND: This case report highlights the importance of standardized and fully digital sequential treatment in complex occlusal rehabilitation cases. To fully resolve the patient's dental needs, such cases often require multidisciplinary interventions including periodontal therapy, endodontic treatment, anterior esthetics, implant restoration, and prosthetic rehabilitation. A fully digital workflow (including facial scanners, intraoral scanners, jaw motion tracking systems, virtual articulators, and computer-aided design software) streamlined the complex treatment, enhancing workflow simplicity, efficiency, visibility, and precision. CASE PRESENTATION: The patient presented with decreased chewing efficiency of the upper and lower prostheses, along with unsatisfactory esthetic appearance of the anterior teeth. After physical examination and radiological assessment, this complex occlusal rehabilitation case required periodontal therapy, anterior esthetic enhancement, implant restoration, and fixed prosthetic rehabilitation. Therefore, a fully digital workflow was adopted. Full-crown prostheses were placed on teeth 13, 23, and 34; a fixed bridge encompassed positions 32 to 42, and single implant crowns were placed on teeth 35 and 36. Implant-supported fixed bridges were constructed for teeth 12 to 22 and 44 to 46, anchored by implants at teeth 12, 22, 44, and 46. All definitive prostheses were fabricated from zirconia ceramics, chosen for their durability and esthetic characteristics. Finally, restorations with satisfactory esthetic and functional characteristics were seated, preserving the tooth and its supporting structures. During treatment and follow-up, the T-scan occlusal analysis system was utilized to continuously monitor and guide the adjustment of occlusal distribution across the patient's dental arches. After 18 months, the patient remains satisfied with the definitive restorations. CONCLUSIONS: This report is intended to help dentists understand and implement standardized and fully digital workflows during the management of complex occlusal rehabilitation cases; it may also facilitate harmonious integration of esthetic and functional characteristics.

Occlusal trauma aggravates periodontitis through the plasminogen/plasmin system.

OBJECTIVES: Periodontitis is a common oral disease that is aggravated by occlusal trauma. Fibrin is a protein that participates in blood clotting and is involved in several human diseases. The deposition of fibrin in periodontal tissues can induce periodontitis, while mechanical forces may regulate the degradation of fibrin. Our study investigated how occlusal trauma aggravating periodontitis through regulating the plasminogen/plasmin system and fibrin deposition. MATERIALS AND METHODS: This study included 84 C57BL/6 mice in which periodontitis was induced with or without occlusal trauma. Micro-computed tomography was used to assess bone resorption. Fibrin, fibrinogen, plasminogen, plasmin, tissue plasminogen activator (t-PA), and urokinase plasminogen activator (u-PA) levels were measured using Frazer-Lendrum staining, quantitative reverse transcription polymerase chain reaction, enzyme-linked immunosorbent assay, western blotting, immunofluorescence staining, and immunohistochemistry staining. RESULTS: Occlusal trauma aggravated inflammation and bone resorption. The periodontitis group showed significant fibrin deposition. Occlusal trauma increased fibrin deposition and neutrophil aggregation. The periodontitis with occlusal trauma group had decreased fibrinogen, t-PA, and u-PA expression and plasmin and fibrin degradation product levels, as well as increased plasminogen levels. CONCLUSION: Occlusal trauma promotes excessive fibrin deposition by suppressing the plasminogen/plasmin system, thus exacerbating periodontitis.

Temporary Hydrostatic Splint Therapy and Its Effects on Occlusal Forces.

Background and objectives: This study analyzed and compared the distribution patterns of occlusal forces using T-Scan III before and after the hydrostatic temporary oral splint (Aqualizer Ultra) therapy in healthy subjects and subjects with temporomandibular disorders (TMDs). Materials and Methods: Fifty-one subjects were divided into groups based on anamnesis and responses to the Fonseca questionnaire. The first group, non-TMDs group (n = 19), and the second group, TMDs group (n = 32), had mild-to-severe TMDs, as identified by the Fonseca questionnaire. The non-TMDs group had an average age of 25.4 years (SD = 4.8, range 20-38) with 15 females (78.95%) and 4 males (21.05%). The TMDs group had an average age of 27.4 years (SD = 7.0, range 22-53) with 25 females (78.125%) and 7 males (21.875%). T-Scan III device was used for occlusal analysis before and after hydrostatic splint usage. Results: Significant differences were observed in the TMDs group for anterior and posterior right percentages of forces before and after hydrostatic splint usage. The analysis of force distribution per sector before and after hydrostatic splint therapy showed no significant differences in the non-TMDs group. Analysis of force distributions in the entire study population before and after hydrostatic splint therapy showed significant differences in the anterior and posterior right regions. Occlusal force increased by 32-56% in the front region and decreased in the posterior area after hydrostatic splint usage. Conclusions: Hydrostatic splint therapy is recommended as a part of full-mouth rehabilitation treatment for all patients regardless of the severity of TMDs.

Contact point marking with the OccluSense system-an in vitro study on reliability and validity.

BACKGROUND: Occlusal contacts can be stained and thereby visualised employing occlusal indicators. Qualitative and quantitative indicators are differentiated. The hybrid system OccluSense supposedly combines analogue contact marking and digital registration of contacts. The reliability and validity of its contact marking have not yet been validated. OBJECTIVES: The aim of this controlled randomised in-vitro study was to examine the reliability and validity of analogue contact staining with OccluSense compared to Arti-Fol and the reference standard Gnatho-Film. MATERIALS AND METHODS: An experimental apparatus was designed to simulate static occlusion. The occlusal contacts were stained 50 times with Gnatho-Film to determine the average number and location of contacts registered. For comparison, the contacts were pre-stained with Gnatho-Film and then registered with Arti-Fol or OccluSense 50 times each. Every staining was statistically evaluated and compared to Gnatho-Film alone, regarding the number and location of contacts. Based on the observed characteristic staining behaviour of OccluSense, a modified evaluation strategy was developed for its colour markings (OccluSense (mod.)). RESULTS: Both evaluations of OccluSense determine that the same number of contacts was registered in over 94% of all cases. Neither OccluSense nor Arti-Fol stain the exact same number of contacts as Gnatho-Film, but the modified evaluation OccluSense (mod.) did improve the results for validity. CONCLUSION: When employing the modified evaluation strategy, OccluSense staining achieves similar reliability and validity as the reference standard. Pre-colouring of occlusal contacts with Gnatho-Film and the modified evaluation strategy, might become standard for analysing occlusal contacts stained by OccluSense in the future.

Relationship between the mandibular curve of Spee and the maxillary compensating curve with dentoskeletal morphology : A cross-sectional study in Chinese young adults with normal occlusion.

PURPOSE: The purpose of this cross-sectional study was to use multiple regression analysis to evaluate the relationship between the mandibular curve of Spee (COS) and the maxillary compensating curve with dentoskeletal morphology in young Chinese adults with normal occlusion. METHODS: This study comprised 62 young adults (31 males, mean age: 24.1 ± 2.2 years; 31 females, mean age: 23.3 ± 3.3 years) with Angle class I normal occlusion. For every subject, intraoral scan models of the maxillary and mandibular arches and lateral cephalograms were acquired. The depth of the COS and compensating curve were assessed on the intraoral scan models. Multiple dental arch dimensional and cephalometric variables were screened by univariate analysis. Subsequently, a multiple linear regression model (forward stepwise selection) was constructed to determine which variables were significantly correlated with the two curve depths. RESULTS: In the mandible, the COS depth was deepest at the mesiobuccal cusp of the first molar. Overjet, mandibular arch width and mandibular-occlusal plane angle significantly correlated with the COS depth (P < 0.05), accounting for 33.1% of the variation in the mandibular COS. In the maxilla, the deepest point of the compensating curve was at the distobuccal cusp of the first molar. Mandibular arch perimeter and overbite significantly correlated with the maxillary compensating curve (P < 0.05), explaining 23.3% of the variation. CONCLUSIONS: Overjet, overbite, mandibular-occlusal plane angle, mandibular arch width and perimeter should be considered when reconstructing occlusal curves in clinical orthodontic treatment and in prosthetic restoration.

Prediction of surgery-first approach orthognathic surgery using deep learning models.

The surgery-first approach (SFA) orthognathic surgery can be beneficial due to reduced overall treatment time and earlier profile improvement. The objective of this study was to utilize deep learning to predict the treatment modality of SFA or the orthodontics-first approach (OFA) in orthognathic surgery patients and assess its clinical accuracy. A supervised deep learning model using three convolutional neural networks (CNNs) was trained based on lateral cephalograms and occlusal views of 3D dental model scans from 228 skeletal Class III malocclusion patients (114 treated by SFA and 114 by OFA). An ablation study of five groups (lateral cephalogram only, mandible image only, maxilla image only, maxilla and mandible images, and all data combined) was conducted to assess the influence of each input type. The results showed the average validation accuracy, precision, recall, F1 score, and AUROC for the five folds were 0.978, 0.980, 0.980, 0.980, and 0.998 ; the average testing results for the five folds were 0.906, 0.986, 0.828, 0.892, and 0.952. The lateral cephalogram only group had the least accuracy, while the maxilla image only group had the best accuracy. Deep learning provides a novel method for an accelerated workflow, automated assisted decision-making, and personalized treatment planning.

Trueness of maxillomandibular relationship in 3D-printed and conventional casts.

OBJECTIVES: To compare the trueness of maxillomandibular relationship between articulated 3D-printed and conventional diagnostic casts in maximum intercuspation (MIP). METHODS: Reference casts were articulated in MIP, and scanned using a Coordinate Measurement Machine (CMM, n = 1). Digital scans were made from the reference casts by using an intraoral scanner (IOS, n = 10) (Trios 4; 3Shape A/S). IOS scans were processed to create 3D-printed casts by using MAX UV385 (Asiga) and NextDent 5100 (3DSystems) 3D-printers. The conventional workflow implemented vinylpolysiloxane (VPS) impressions and Type IV stone. Stone and 3D-printed casts were articulated and digitized with a laboratory scanner (E4; 3Shape A/S). The 3D-printed casts were scanned on two occasions: with and without positioning pins. Inter-arch distances and 3D-contact area were measured and compared. Statistical tests used were Shapiro-Wilk, Levene's, Welch's t-test, and 2-way ANOVA (α=0.05). RESULTS: IOS group showed similar or better maxillomandibular relationship trueness than stone casts and 3D-printed casts (p < 0.05). 3D-contact area analysis showed similar deviations between 3D-printed and stone casts (p > 0.05). The choice of 3D-printer and presence of positioning pins on the casts significantly influenced maxillomandibular relationship trueness (p < 0.05). CONCLUSIONS: Articulated 3D-printed and stone casts exhibited similar maxillomandibular relationship trueness. CLINICAL SIGNIFICANCE: Although 3D-printing methods can introduce a considerable amount of deviations, the maxillomandibular relationship trueness of articulated 3D-printed and stone casts in MIP can be considered similar.

Influence of occlusal thickness on the fracture resistance of chairside milled lithium disilicate posterior full-coverage single-unit prostheses containing virgilite: A comparative in vitro study.

PURPOSE: To evaluate the fracture resistance of chairside computer-aided design and computer-aided manufacturing (CAD-CAM) lithium disilicate mandibular posterior crowns with virgilite of different occlusal thicknesses and compare them to traditional lithium disilicate crowns. MATERIALS AND METHODS: Seventy-five chairside CAD-CAM crowns were fabricated for mandibular right first molars, 60 from novel lithium disilicate with virgilite (CEREC Tessera, Dentsply Sirona), and 15 from traditional lithium disilicate (e.max CAD, Ivoclar Vivadent). These crowns were distributed across five groups based on occlusal thickness and material: Group 1 featured CEREC Tessera crowns with 0.8 mm thickness, Group 2 had 1.0 mm thickness, Group 3 had 1.2 mm thickness, Group 4 with 1.5 mm thickness, and Group 5 included e.max CAD crowns with 1.0 mm thickness. These crowns were luted onto 3D-printed resin dies using Multilink Automix resin cement (Ivoclar Vivadent). Subsequently, they underwent cyclic loading (2,000,000 cycles at 1 Hz with a 275 N force) and loading until fracture. Scanning electron microscopy (SEM) assessed the fractured specimens. Statistical analysis involved one-way ANOVA and the Kruskal-Wallis Test (α = 0.05). RESULTS: Fracture resistance varied significantly (<0.001) across mandibular molar crowns fabricated from chairside CAD-CAM lithium disilicate containing virgilite, particularly between crowns with 0.8 mm and those with 1.2 and 1.5 mm occlusal thickness. However, no significant differences were found when comparing crowns with 1, 1.2, and 1.5 mm thicknesses. CEREC Tessera crowns with 1.5 mm thickness exhibited the highest resistance (2119 N/mm2), followed by those with 1.2 mm (1982 N/mm2), 1.0 mm (1763 N/mm2), and 0.8 mm (1144 N/mm2) thickness, whereas e.max CAD crowns with 1.0 mm occlusal thickness displayed the lowest resistance (814 N/mm2). CONCLUSIONS: The relationship between thickness and fracture resistance in the virgilite lithium disilicate full-coverage crowns was directly proportional, indicating that increased thickness corresponded to higher fracture resistance. No significant differences were noted among crowns with thicknesses ranging from 1 to 1.5 mm. This novel ceramic exhibited superior fracture resistance compared to traditional lithium disilicate.

Use of a novel three-dimensional anatomical plating system for treatment of caudal mandibular fractures in cats: 13 cases (2019-2023).

CASE SERIES SUMMARY: A total of 13 cases of cats with a caudal mandibular fracture treated with a novel surgical technique using the Ramus Anatomical Plate system were reviewed. Preoperative, immediate postoperative and a minimum of 8 weeks postoperative CT images were required as inclusion criteria. The outcome and complications were determined from clinical data and radiographic follow-up examinations. All cases achieved adequate anatomical reduction, resulting in a functional and atraumatic occlusion postoperatively. No intraoperative complications were reported. Time to voluntary food intake was in the range of 1-25 days. No evidence of disruptions to the implants or screw loosening was observed in the 8-week postoperative CT imaging, with radiographic evidence of complete osseous union in all fractures. The most common postoperative complication was swelling at the surgical site. Two cats had postoperative exophthalmos due to retrobulbar haemorrhage, and one cat exhibited partial wound dehiscence 5 days postoperatively, which resolved with medical management. Longer-term complications included intraoral plate exposure in one cat, which required plate removal 10 months postoperatively. RELEVANCE AND NOVEL INFORMATION: In this case series, rigid internal fixation of caudal mandibular fractures using the Ramus Anatomical Plate osteosynthesis system was associated with a minimal complication rate, and satisfactory radiographic and clinical outcomes. The reported outcomes of this novel technique are favourable when compared with previous techniques described for the management of these fracture types.

Aspectos clinicoepidemiológicos de adultos con guía anterior de la oclusión dentaria disfuncional

Introducción: Los dientes anteriores tienen una función predominante en el sistema estomatognático, esencial para la estética, la fonación y la masticación. Objetivo: Caracterizar a los adultos con guía anterior de la oclusión dentaria disfuncional según variables clínicas y epidemiológicas. Métodos: Se realizó un estudio descriptivo y transversal, desde octubre de 2021 hasta abril de 2022, en la Clínica Estomatológica Docente 3 de Octubre de Las Tunas. El universo estuvo conformado por 825 historias clínicas que contenían el diagnóstico de pacientes con bruxismo, oclusión traumática y trastornos temporomandibulares, quienes presentaban disfunción de la guía anterior de la oclusión dentaria. Mediante el muestreo no probabilístico intencional, fue seleccionada una muestra de 615 con fórmula dentaria íntegra o desdentamiento parcial de clase III de Kennedy y atención estomatológica concluida o inactivación de los procesos de caries e inflamatorios agudos. Resultados: Primaron el sexo femenino (54,8 %) y las edades de 40-49 años (33,5 %). El bruxismo prevaleció como diagnóstico clínico (41,9 %) con predominio del correspondiente al sueño (39,1 %), el secundario (51,2 %), el probable (59,7 %) y el moderado (69,4 %); entre sus clasificaciones más relevantes se destacó el sistema estomatognático disfuncional (84,4 %). Las manifestaciones clínicas dentarias predominantes fueron las facetas de desgaste (87,5 %). Conclusiones: La caracterización de los pacientes con guía anterior de la oclusión dentaria disfuncional permite establecer una panorámica actualizada de esta problemática de salud para un mejor seguimiento y tratamiento a dichos pacientes.

Introduction: Anterior teeth have a predominant function in the stomatognatic system, essential for the aesthetics, phonation and mastication. Objective: To characterize adults with anterior guide of dysfunctional dental occlusion according to clinical and epidemiological variables. Methods: A descriptive and cross-sectional study, was carried out from October, 2021 to April, 2022, in the 3 de Octubre Teaching Stomatological Clinic from Las Tunas. The universe was formed by 825 medical records that contained the diagnosis of patients with bruxism, traumatic occlusion and temporomandibular disorders who presented anterior guide of the dysfunctional dental occlusion. By means of the intentional non probabilistic sampling, a sample of 615 with entire dental formula or class III partial toothlessness of Kennedy and concluded stomatologic care or inactivation of the cavity and acute inflammatory processes was selected. Results: There was a prevalence of the female sex (54.8%) and the 40-49 age group (33.5%). Bruxism prevailed as clinical diagnosis (41.9%) with prevalence of the corresponding to sleep (39.1%), secondary (51.2%), probable (59.7%) and moderate (69.4%); among the most outstanding classifications was the dysfunctional stomatognatic system (84.4%). The predominant dental clinical manifestations were the wear facets (87.5%). Conclusions: The characterization of patients with anterior guide of the dysfunctional dental occlusion allows to establish an up-to-date panoramic of this health problem, for a better follow-up and treatment to these patients.

Adjacent Implant Influence on Tooth Restoration in a Gastro-Esophageal Reflux Disease (GERD) Patient Using Monoblock Post-Fused Crown: A Case Report.

This case report explores how the presence of an adjacent implant influenced the restoration of a tooth with pulpitis in a gastro-esophageal reflux disease (GERD) patient. A patient with GERD requires a tooth-colored crown not only for aesthetics but also to address potential galvanic concerns arising from an adjacent implant. GERD, a condition causing non-cavity erosion, weakens tooth structure over time, presenting significant challenges in treatment. It resulted in bite relapse and insufficient occlusal clarity over time. A comprehensive treatment approach was needed to restore both function and appearance. This involved managing galvanism using non-metallic materials to ensure optimal occlusal clarity, as well as meticulously reinforcing and restoring tooth structure. Monoblock post-fused crowns were chosen for their superior durability, stability, and comfort. The ceramic layering not only effectively prevented galvanic issues by insulating the tooth structure but also significantly improved the natural appearance of teeth, thereby promoting long-term oral health and successfully managing complex dental concerns. The dental team successfully restored the damaged tooth by considering specific factors that influenced the treatment plan, including achieving optimal aesthetic outcomes.