Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Influence of viscosity and fiber reinforcement of resin composite on fracture strength and failure mode of restored molars.

OBJECTIVE: To evaluate the fracture behavior of human molars with extensive MOD restorations using short-fiber-reinforced resin composite of varying viscosities. MATERIALS AND METHODS: Human molars were randomly divided into seven groups (n = 12): intact teeth (control); restoration using conventional high-viscosity resin composite without (Filtek Z350XT, 3M) or with fibers (everX Posterior, GC); conventional low-viscosity resin composite without (Filtek Supreme Flowable, 3M) or with fibers (everX Flow Dentin Shade, GC); bulk-fill low-viscosity resin composite (Filtek Bulk Fill Flow, 3M) or with fibers (everX Flow Bulk Shade, GC). Restorations were performed on extensive MOD preparations, following the manufacturers' recommendations for each material. Specimens underwent fracture strength testing (N) and fracture pattern (%) categorized as repairable, possibly repairable, or non-repairable. Results were analyzed using a generalized linear model (N) and Fisher's exact test (%), with α = 0.05. RESULTS: Restorations performed with high-viscosity materials showed fracture strength values similar to the control and higher than those of restorations using low-viscosity resin composites (p < 0.0001), except for the bulk-fill low-viscosity resin composite with fibers (p > 0.05). Teeth restored using low-viscosity resin composite with fibers showed a higher % of repairable and possibly repairable fractures than the control (p = 0.0091). CONCLUSIONS: The viscosity of materials mediated the fracture strength, with restorations using high-viscosity resin composites promoting values similar to the intact tooth; however, the presence of fibers influenced the fracture pattern. CLINICAL SIGNIFICANCE: Teeth with MOD cavities restored with high-viscosity resin composites showed similar fracture strength to intact teeth. Fiber-reinforced low-viscosity resin composite for the base of restoration resulted in a more repairable/possibly repairable fracture pattern.

Color Stability of Single-Shade Resin Composites in Direct Restorations: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Effect of different design and surface treatment on the load-to-failure of ceramic repaired with composite.

Glass ceramics are widely used to manufacture esthetic veneers, inlays, onlays, and crowns. Although the clinical survival rates ofglass-ceramic restorations arefavorable,fractures or chips are common. Certain cases can be repaired with direct composite. AIM: The aim of this study was to investigate the interaction effect of different designs and surface treatments on the load-to-failure of lithium disilicate glass-ceramic repaired with nanofilled composite. MATERIALS AND METHOD: Lithium-disilicate glass-ceramic slabs (IPS e.max Press, Ivoclar Vivadent) with three different designs of the top surface (flat, single plateau, or doubleplateau) (n=U) received 'no treatment', '5% HF etching', or "AI2O3 sandblasting". HF-etched and sandblasted slabs also received silane and universal one-step adhesive application. All slabs were incrementally repaired with nanofilled composite (Filtek Z350, 3M ESPE) up to6 mm above the highest ceramic top plateau. Specimens were stored in artificial saliva at 37 °C for 21 days and then subjected to 1,000 thermocycles between 5 and 55 °C. The interface composite-ceramic of each specimen was tensile tested until failure in a universal testing machine and the mode of failure was determined under a stereomicroscope. The ceramic surface morphology of one representative tested specimen from each subgroup (design/surface treatment) was observed through scanning electron microscopy (SEM). RESULTS: Regardless of ceramic design, the absence of surface treatment resulted in significantly lower load-to-failure values. No significant differences in load-to-failure values were observed between HF-etched and sandblasted specimens for the flat design; however, HF etching resulted in significantly higher load-to-failure values than sandblasting for both single plateau and double plateau designs. The majority (60%) of HF-etched specimens with single plateau or double plateau presented mixed failures. SEM photomicrographs showed that HF-etched specimens had smoother surfaces than sandblasted specimens. CONCLUSION: The surface treatment of a defective lithium disilicate glass-ceramic restoration has more influence than its macroscopic design on the retention of the composite repair. HF etching seems to provide higher bond strength to the composite repair.

Embora fraturas e lascamento de restauragoes vitrocerámicas sejam comuns, alguns casos podem ser reparados com compósito direto. OBJETIVO: investigar o efeito da interagao de diferentes formas e tratamentos de superficie na carga de ruptura de uma vitrocerámica reforgada com dissilicato de litio reparada com compósito nanoparticulado. MATERIAIS E MÉTODOS: A superficie superior de espécimes de vitroceramica (IPS e.max Press, Ivoclar Vivadent) foi preparada com tres formas (plana, plato único, ou duplo) e recebeu (n=11): 'nenhum tratamento', 'condicionamento com ácido hidrofluoridrico 5%', ou 'jateamento com AfOf. Ambos espécimes condicionados e jateados receberam silano e adesivo universal. Todos os espécimes foram reparados incrementalmente com compósito (Filtek Z350, 3M ESPE) até6 mm acima do plato cerámico mais alto, armazenados em saliva artificial á 37 °C por 21 dias, e submetidos á 1.000 termociclos (5 e 55 °C). A interface compósito-cerámica de cada amostra foi testada á tragao até sua falha em máquina universal e o modo de falha foi determinado com estereomicroscópio. A morfologia da superficie de uma amostra representativa de forma/tratamento de superficie foi observada através de microscopia eletronica de varredura (MEV). RESULTADOS: Independentemente da forma ceramica, a ausencia de tratamento superficial resultou em valores de carga de ruptura significativamente menores. Nao foi observada differenga significativa entre os espécimes planos condicionados ou jateados; no entanto, o condicionamento resultou em valores significativamente maiores que o jateamento para espécimes com plato único e duplo. A maioria (60%) dos espécimes condicionados e com plato único ou duplo apresentou falhas mistas. Imagens SEM demonstraram rugosidade superficial mais regular dos espécimes condicionados que os jateados. CONCLUSÕES: O tratamento superficial de uma restauragao defeituosa de vitrocerámica reforgada por dissilicato de litio tem maior influencia na retengao do reparo de compósito do que sua forma macroscópica; ainda, o condicionamento com ácido hidrofluoridrico parece proporcionar maior resistencia de uniao ao reparo com compósito.

Adding mechanobiological cell features to finite element analysis of an immediately loaded dental implant.

Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies have tried to simulate the biological characteristics of the healing process of loaded implants. This study used the rule of mixtures to simulate the biological healing process of immediate implants in an alveolus socket and bone-implant junction interface through FEA. Three-dimensional geometric models of the structures were obtained, and material properties were derived from the literature. The rule of mixtures was used to simulate the healing periods-immediate and early loading, in which the concentration of each cell type, based on in vivo studies, influenced the final elastic moduli. A 100 N occlusal load was simulated in axial and oblique directions. The models were evaluated for maximum and minimum principal strains, and the bone overload was assessed through Frost's mechanostat. There was a higher strain concentration in the healing regions and cortical bone tissue near the cervical portion. The bone overload was higher in the immediate load condition. The method used in this study may help to simulate the biological healing process and could be useful to relate FEA results to clinical practice.

Influence of size-anatomy of the maxillary central incisor on the biomechanical performance of post-and-core restoration with different ferrule heights.

PURPOSE: The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS: Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS: Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION: Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.

Progressive Tooth Wear Against Resin-Based Restorative Composites.

PURPOSE: The composition and properties of resin-based composite materials could affect tooth wear and lead to clinical problems. Therefore, the study objective was to characterize human tooth wear behavior against a bulk-fill restorative (BF) compared to a conventional resin composite (RC) and a CAD/CAM resin nano ceramic (RN). METHODS: Square-shaped specimens of each material were prepared and sub-divided according to the number of testing cycles (n=8): 100,000, 250,000, and 500,000 cycles. An occlusal wear test was performed using a chewing machine with 49 N, 2 Hz, in 37°C distilled water. Human premolar cusps were used as antagonists. Micro-CT and laser scanner were used to scan antagonists and specimens, respectively. Wear volume was assessed using a software and the wear pattern was examined with SEM. Softening in solvent analysis was performed by measuring the materials' Knoop microhardness (KHN) before and after immersion in ethanol. Wear volume data were analyzed with two-way ANOVA and Student-Neuman-Keuls test (α=0.05). RESULTS: For tooth and specimen wear volume, there was statistical significance for material and number of cycles, but not for the interaction between factors. BF resulted in less tooth (p=0.008) and specimen (p=0.030) wear than RN and RC, which were similar (p⟩0.05). Volume loss increased from 100,000 to 500,000 cycles. BF showed the lowest microhardness (KHN1); and %ΔKHN similar to RC, but greater than RN. CONCLUSION: BF induced less volume loss to the tooth than RC and RN, while presenting greater wear resistance. The tooth wear pattern and damage progression were mild for all materials. CLINICAL SIGNIFICANCE: Resin composites show favorable wear behavior, leading to low volume loss and mild structural damage of the tooth. Regular bulk-fill resin composite stands out for its efficient restorative technique, low wear susceptibility and reduced capacity to wear down the tooth.

Adhesive restorations in primary dentition: A retrospective analysis of survival rate and associated factors.

BACKGROUND: Several clinical and individual factors may play a role in the survival rate of dental restorations, such as characteristics related to the child's age and oral hygiene, and factors associated with the tooth, such as the type of material and number of surfaces to be restored. AIM: To analyse the survival rate of adhesive restorations on primary teeth and factors associated with restoration survival. DESIGN: The study included dental records of children aged 3-12 years having received adhesive restorations on primary teeth at a Brazilian dental school between 2009 and 2019. A Kaplan-Meier survival curve was used to plot survival rates using the log-rank test. A multivariate Cox regression model was run to identify individual and dental factors associated with restoration failure. RESULTS: The sample comprised 269 restored teeth in 111 children. Survival curves were similar for all materials (p = .20) and types of isolation (p = .05). The annual failure rate was 3.60% for glass ionomer cement, 1.23% for resin-modified glass ionomer cement and 0.40% for composite resin. The following variables were associated with more failures: Class II restoration compared with Class I (HR = 1.96; 95%CI: 1.28-2.99, p < .001), proportion of decayed teeth (HR = 11.89; 95%CI: 2.80-50.57, p < .001) and child's age (HR = 1.17; 95%CI: 1.06-1.29, p < .001). CONCLUSION: The different materials and types of isolation had similar survival rates. Children with more decayed teeth have an increased risk of restoration failure.

Effect of brushing simulation on the wear behavior of repaired CAD-CAM restorations.

OBJECTIVE: The aim of the present study was to evaluate the influence of multidirectional brushing on the surface roughness, morphology, and bonding interface of resin-repaired CAD-CAM ceramic and composite restorations. MATERIALS AND METHODS: Twelve (N = 12) blocks (4 mm × 4 mm × 2 mm for parallel axis; 5 mm × 4 mm × 2 mm for perpendicular axis) of lithium disilicate glass-ceramic (IPS e.max CAD, Ivoclar AG) and CAD-CAM resin composite (Tetric CAD, Ivoclar AG) were obtained and repaired with direct resin composite (Clearfil AP-X, Kuraray). An abrasive slurry was prepared and the brushing was performed according to each restorative material and axis of brushing (n = 6; perpendicular to repair interface and parallel to repair interface) during 3,650 cycles (240 strokes per minute) to simulate 3 years of brushing. The surface roughness (Ra) and the profile variation for each material (restoration and direct repair resin composite) were measured at the baseline condition and after brushing, and the mean roughness and presence of steps at the repair interface were evaluated through factorial analysis of Variance (ANOVA). Scanning Electron Microscopy (SEM) images were taken to evaluate the surface topography of the repaired materials after brushing. RESULTS: The mean roughness of the repaired CAD-CAM restorations was affected by the brushing (P < .05), mainly when evaluating the repair material and the interface (P < .05), while the restorative CAD-CAM materials presented more stable values. The profile evaluation showed higher steps at the interface when repairing lithium disilicate than for CAD-CAM resin composite. CONCLUSION: Repaired CAD-CAM restorations were susceptible to wear after brushing simulation. The surface roughness of the direct resin composite was the most affected leading to step development at the interface, particularly in the repaired lithium disilicate samples. Cinical maintenance recalls and polishing protocols must be considered to enhance the longevity of such restorations.

Adhesion and sealing of different universal adhesive systems associated with bulk-fill resins after using endodontic irrigation solutions: An in vitro study.

This study aimed to evaluate the interface of universal adhesive (UA) with bulk-fill resin (BF) and dentin, after endodontic irrigation. The pulp chamber of 96 molars was irrigated with chlorhexidine 2% (CHX) or sodium hypochlorite 5.25% (NaOCl) and restored according to three restorative protocols. Microtensile bond strength (µTBS) and nanoleakage tests were performed after 24 h of thermocycling. Kruskal Wallis, Mann-Whitney and Wilcoxon were performed (p < 0.05). Comparing restorative systems, a difference was found only when irrigated with CHX after 24 h. CHX provided higher µTBS than NaOCl after 24 h for two restorative protocols; after thermocycling, NaOCl provided the greatest µTBS than CHX for one group. Decreased µTBS was observed for all restorative systems when CHX was used after thermocycling. NaOCl demonstrated the highest nanoleakage. The composition of UA influenced the immediate adhesion and sealing to BF when CHX was used; ageing has a deteriorating effect on adhesion and sealing for all restorative systems.

Effect of different design and surface treatment on the load-to-failure of ceramic repaired with composite / Efeito de diferentes tratamentos de superficie e formas do preparo de cerámicas na resistencia de uniao de reparos em resina composta

ABSTRACT Glass ceramics are widely used to manufacture esthetic veneers, inlays, onlays, and crowns. Although the clinical survival rates ofglass-ceramic restorations arefavorable,fractures or chips are common. Certain cases can be repaired with direct composite. Aim The aim of this study was to investigate the interaction effect of different designs and surface treatments on the load-to-failure of lithium disilicate glass-ceramic repaired with nanofilled composite. Materials and Method Lithium-disilicate glass-ceramic slabs (IPS e.max Press, Ivoclar Vivadent) with three different designs of the top surface (flat, single plateau, or doubleplateau) (n=U) received 'no treatment', '5% HF etching', or "AI2O3 sandblasting". HF-etched and sandblasted slabs also received silane and universal one-step adhesive application. All slabs were incrementally repaired with nanofilled composite (Filtek Z350, 3M ESPE) up to6 mm above the highest ceramic top plateau. Specimens were stored in artificial saliva at 37 °C for 21 days and then subjected to 1,000 thermocycles between 5 and 55 °C. The interface composite-ceramic of each specimen was tensile tested until failure in a universal testing machine and the mode of failure was determined under a stereomicroscope. The ceramic surface morphology of one representative tested specimen from each subgroup (design/surface treatment) was observed through scanning electron microscopy (SEM). Results Regardless of ceramic design, the absence of surface treatment resulted in significantly lower load-to-failure values. No significant differences in load-to-failure values were observed between HF-etched and sandblasted specimens for the flat design; however, HF etching resulted in significantly higher load-to-failure values than sandblasting for both single plateau and double plateau designs. The majority (60%) of HF-etched specimens with single plateau or double plateau presented mixed failures. SEM photomicrographs showed that HF-etched specimens had smoother surfaces than sandblasted specimens. Conclusion The surface treatment of a defective lithium disilicate glass-ceramic restoration has more influence than its macroscopic design on the retention of the composite repair. HF etching seems to provide higher bond strength to the composite repair.

RESUMO Embora fraturas e lascamento de restauragoes vitrocerámicas sejam comuns, alguns casos podem ser reparados com compósito direto. Objetivo investigar o efeito da interagao de diferentes formas e tratamentos de superficie na carga de ruptura de uma vitrocerámica reforgada com dissilicato de litio reparada com compósito nanoparticulado. Materials e Método A superficie superior de espécimes de vitroceramica (IPS e.max Press, Ivoclar Vivadent) foi preparada com tres formas (plana, plato único, ou duplo) e recebeu (n=11): 'nenhum tratamento', 'condicionamento com ácido hidrofluoridrico 5%', ou 'jateamento com AfOf. Ambos espécimes condicionados e jateados receberam silano e adesivo universal. Todos os espécimes foram reparados incrementalmente com compósito (Filtek Z350, 3M ESPE) até6 mm acima do plato cerámico mais alto, armazenados em saliva artificial á 37 °C por 21 dias, e submetidos á 1.000 termociclos (5 e 55 °C). A interface compósito-cerámica de cada amostra foi testada á tragao até sua falha em máquina universal e o modo de falha foi determinado com estereomicroscópio. A morfologia da superficie de uma amostra representativa de forma/tratamento de superficie foi observada através de microscopia eletronica de varredura (MEV). Resultados Independentemente da forma ceramica, a ausencia de tratamento superficial resultou em valores de carga de ruptura significativamente menores. Nao foi observada differenga significativa entre os espécimes planos condicionados ou jateados; no entanto, o condicionamento resultou em valores significativamente maiores que o jateamento para espécimes com plato único e duplo. A maioria (60%) dos espécimes condicionados e com plato único ou duplo apresentou falhas mistas. Imagens SEM demonstraram rugosidade superficial mais regular dos espécimes condicionados que os jateados. Conclusoes O tratamento superficial de uma restauragao defeituosa de vitrocerámica reforgada por dissilicato de litio tem maior influencia na retengao do reparo de compósito do que sua forma macroscópica; ainda, o condicionamento com ácido hidrofluoridrico parece proporcionar maior resistencia de uniao ao reparo com compósito.

The use of fiberglass posts in dentistry: a literature review / O uso de pinos de fibra de vidro na odontologia: uma revisão de literatura

The choice of retaining material that will replace the lost properties of the tooth, in which it is fragile and with loss of dentin structure, is important. The success of the treatment will depend on the qualities presented in it. Therefore, the objective of this work, through a literature review, is to present the advantages and disadvantages observed in the use of fiberglass post intraradicular retainer. This paper reviews the most relevant articles on the specificities presented in the fiberglass post retaining material, published in the period (2003 to 2020). The bibliographic search was performed in PubMed, Lilacs, Scielo, Google Scholar databases. In view of the selected articles on the subject, it is possible to observe the authors' acceptance of the application of the use of retainers, highlighting that in the treatment of cases with extensive coronary destruction, the aim is to have the functional and retentive capacity returned, in addition to the tension resistance. Therefore, theThe use of fiberglass posts in weakened teeth is effective as the material of choice. In cases that require reconstruction and return of tissue integrity, it has sufficient advantages for its selection. Despite the disadvantages it has, these do not outweigh the benefits to the point of making its use unfeasible. However, knowing when, where and how to treat is always important in any procedure for a satisfactory final outcome.

A escolha do material retentor que irá substituir as propriedades perdidas do dente, no qual este se apresenta de forma fragilizada e com perca de estrutura dentinária é importante. O sucesso do tratamento irá depender das qualidades apresentadas no mesmo. Sendo assim, o objetivo deste trabalho por meio de uma revisão de literatura é apresentar as vantagens e desvantagens observadas no uso do retentor intrarradicular de pino de fibra de vidro. Este trabalho revisa os artigos mais relevantes sobre as especificidades apresentadas no material retentor de pino de fibra de vidro, publicadas no período (2003 até 2020). A busca bibliográfica foi realizada nos bancos de dados PubMed, Lilacs, Scielo, Google Scholar. Diante dos artigos selecionados referentes ao tema, pode-se observar a aceitação dos autores sobre a aplicação do uso de retentores, destacando-se que no tratamento de casos com destruição coronária extensa o intuito é dispor da devolução da capacidade funcional, retentiva, além da resistência a tensão. Portanto, a utilização de pinos de fibra de vidro em dentes fragilizados apresenta efetividade como material de escolha. Em casos que necessitam de reconstrução e devolução de sua integridade tecidual, possui consigo vantagens suficientes para sua seleção. Apesar das desvantagens que possui, essas não se sobrepõem aos benefícios a ponto de tornarem inviáveis ao seu uso. Entretanto, saber quando, onde e como tratar é sempre importante em qualquer procedimento para um desfecho final satisfatório.

Analysis of color stability and degree of conversion of different types of resin composites

Abstract Resin composites containing surface pre-reacted glass (S-PRG) have been introduced to reduce demineralization and improve remineralization of the tooth structure. However, water diffusion within the material is necessary for its action, which can impair its overall physicomechanical properties over time, including color stability. This study aimed to evaluate the color stability and related degree of conversion (DC) of four resin composites. Discs (6 x 4 mm, n = 5/group) of microhybrid (MH), nanofilled (NF), nanohybrid (NH), and S-PRG-based nanohybrid (S-PRG-NH) composites with two opacities (A2/A2E and A2O/A2D) were prepared. Color (CIELab and CIEDE2000) was evaluated with a spectrophotometer after aging in grape juice (2 x 10 min/10mL/7days). The DC was analyzed by using Fourier transform infrared spectroscopy before and after light-curing. Data were statistically analyzed by using two-way analysis of variance and post-hoc least significant difference tests (p<0.05). In the color stability analysis, the interaction between filler type and opacity was significant (CIELab, p = 0.0015; CIEDE2000, p = 0.0026). NH presented the highest color stability, which did not differ from that of MH. The greatest color alteration was observed for S-PRG-NH. S-PRG fillers also influenced DC (p < 0.05). The nanohybrid resin composite presented favorable overall performance, which is likely related to its more stable organic content. Notwithstanding the benefits of using S-PRG-based nanohybrid resins, mostly in aesthetic procedures, professionals should consider the susceptibility of such resins to color alteration, probably due to the water-based bioactive mechanism of action.

Restoration-repair potential of resin-modified glass ionomer cement

Abstract: This in vitro study aimed to evaluate the repair bond strength of resin-modified glass ionomer cement using either the same material or a universal adhesive in the etch-and-rinse and self-etch modes plus resin composite. Twenty-four resin-modified glass ionomer cement blocks were stored in distilled water for 14 d and thermocycled. Sandpaper ground specimens were randomly assigned to three experimental groups according to the repair protocol: resin-modified glass ionomer cement (Riva Light Cure, SDI) and universal adhesive (Scotchbond Universal Adhesive, 3M Oral Care) in etch-and-rinse or self-etch modes and nanohybrid resin composite (Z350 XT, 3M Oral Care). After 24 h of water storage, the blocks were sectioned, and bonded sticks were subjected to the microtensile bond strength (μTBS) test. One-way ANOVA and Tukey's test were used to analyze the data. The failure mode was descriptively analyzed. The highest μTBS values were obtained when the resin-modified glass ionomer cement was repaired using the same material (p < 0.01). In addition, the mode of application of the universal adhesive system did not influence the repair bond strength of the resin-modified glass ionomer cement. Adhesive/mixed failures prevailed in all groups. Repair of resin-modified glass ionomers with the same material appears to be the preferred option to improve bond strength.

Effects of solvent type and UV post-cure time on 3D-printed restorative polymers.

OBJECTIVES: This study evaluated the impact of different solvents and UV post-curing times on properties of 3D printing resins for provisional restorations. METHODS: The post-processing methods were tested using two solvents (isopropyl alcohol or absolute ethanol) and three UV times (5, 10, or 30 min). The resins tested were Resilab 3D Temp, Printax Temp, and Prizma Bioprov. Microhardness (kgf/mm2), fracture toughness (KIC, MPa√m), surface roughness (Ra, µm), gloss (gloss units), and degree of CC conversion (%DC) were measured (n = 8). All response variables were collected from the same specimen. The specimens were 3D printed using an SLA/LCD printer (150° angulation, 50 µm layer thickness). Light exposure times were adjusted for each material, and the post-processing methods were applied using an all-in-one machine immediately after printing. Data were analyzed using Three-Way ANOVA (α = 0.05). RESULTS: Microhardness was affected by UV post-cure time and 3D resin. Resilab showed higher microhardness with isopropyl alcohol and 30-min UV time, while Printax had higher microhardness with absolute ethanol. KIC was influenced by solvent type, UV time, and 3D resin, with varying effects on different resins. Roughness was affected by 3D resin and UV time, but no significant differences were seen for Resilab or Prizma. Gloss was influenced by 3D resin, and for Prizma, it was lower with specific solvent/UV time combinations. DC was influenced by 3D resin, with each resin behaving differently. SIGNIFICANCE: Tailoring the combination of 3D resin, solvent washing type, and UV post-curing time is important to achieve optimal mechanical and aesthetic outcomes for restorations.

EVIDENCE-PRACTICE GAP IN TREATMENT DECISIONS ABOUT DEFECTIVE COMPOSITE AND AMALGAM RESTORATIONS AMONG BRAZILIAN DENTISTS.

Better understanding of dentists' decision-making about defective restorations is needed to close the evidence-practice gap (EPG). Aim: this study aimed to quantify the EPG about defective restorations and identify dentist factors associated with this EPG. Methods: 216 dentists from São Paulo State, Brazil, completed a questionnaire about three clinical case scenarios involving defective composite restorations with cementum-dentin margins (case 1) and enamel margins (case 2), and an amalgam (case 3) restoration. Dentists were asked what treatment, if any, they would recommend, including preventive treatment, polishing, re-surfacing, or repairing the restoration, or replacing the entire restoration. Replacing the entire restoration in any of these three scenarios was classified as inconsistent with the evidence, comprising an EPG. Bivariate analyses using Chi-square, ANOVA, or multiple comparison tests were performed (p<.05). Results: for defective composite restorations, 49% and 55% of dentists chose to replace the entire restoration for cases 1 and 2, respectively. Twenty-nine percent of dentists chose to replace the entire amalgam restoration. Dentists were significantly more likely to choose to replace the defective amalgam restoration than the composite restoration with a defect at the cementum-dentin margins or the enamel margins (both at p < .001). Female dentists were more likely to choose a conservative treatment than male dentists for cases 1 (p=.034) and 2 (p=.009). Dentists with a higher percentage of patients interested in individualized caries prevention were also more conservative in case 1 (p=.045). Conclusion: a substantial EPG regarding treatment decisions for defective restorations exists, especially for composite restorations. This study adds to the international evidence that an EPG exists in this clinical area and that global strategies need to be developed to close the gap.

Do bioactive materials show greater retention rates in restoring permanent teeth than non-bioactive materials? A systematic review and network meta-analysis of randomized controlled trials.

OBJECTIVES: To answer the following research question: does the clinical evaluation of restorations on permanent teeth with bioactive materials show greater retention rates than those with non-bioactive materials? MATERIALS AND METHODS: A search strategy was used in the following databases: MEDLINE via PubMed, Scopus, Web of Science, LILACS, BBO, Embase, The Cochrane Library, and OpenGrey. Randomized controlled trials (RCTs), with a minimum of 2-year follow-up and evaluating at least one bioactive material in permanent teeth were included. Risk of bias was detected according to the Cochrane Collaboration tool for assessing the risk of bias (RoB 2.0), and network meta-analysis was performed using a random-effects Bayesian-mixed treatment comparison model. RESULTS: Twenty-seven studies were included. The success of the restorations was assessed using modified USPHS system in 24 studies and the FDI criteria in 3 studies. Network meta-analysis revealed three networks based on restoration preparations. Resin composites were ranked with higher SUCRA values, indicating a greater likelihood of being the preferred treatment for class I, II, and III restorations. In class V, resin-modified glass ionomer cement was ranked with the highest value. CONCLUSION: Bioactive restorative materials showed similar good clinical performance in terms of retention similarly to conventional resin composites. CLINICAL SIGNIFICANCE: The findings must be interpreted with caution because many RCT on restorative materials aim to verify the equivalence of new materials over the gold standard material rather than their superiority. The present systematic review also suggests that new RCT with longer follow-up periods are necessary.

Fatigue and marginal adaptation of bulk fill restoratives: Effect of the layering technique and cavity dimension of extensively damaged teeth.

OBJECTIVES: To evaluate the effect of layering technique and cavity dimension on the fatigue behavior and marginal adaptation of bulk fill (BF) restorations in extensively damaged teeth. METHODS: Seventy-two premolars received class II cavities (MOD) followed by endodontic treatment. Half sample had 1/3 of their palatal cusp removed. Teeth were restored using three techniques: (I) incremental, with conventional resin composite (RC); (C) combined, using BF flow and RC, (B) bulk fill, with regular BF. Specimens were subjected to fatigue (80 N, 2 Hz, 37° C water) for 1 million cycles (n = 12). The test was interrupted every 250,000 cycles to evaluate tooth integrity, restoration fracture and adaptation using FDI criteria. Images of the proximal surfaces were obtained before and after the cycling to measure the gap. Restoration fatigue survival and success were analyzed using Weibull distribution and Maximum Likelihood Estimation. Gap thickness was analyzed with Kruskal-Wallis and Student-Newman-Keuls tests (α = 0.05). RESULTS: For the survival analysis, Weibull modulus (ß) and characteristic lifetime (η) were similar among groups. Yet, for the success analysis, in which only restorations that were free of technical complications were ranked as success, the bulk-fill technique resulted in higher ß, while the combined technique produced restorations with higher η, for teeth that had their cusp removed. C-technique also resulted in smaller gaps than I and B. SIGNIFICANCE: The effect of the layering technique on the success of restorations was dependent on the cavity extension. The combined technique favors the adaptation and the longevity of extensively damaged teeth.

Glutaraldehyde-based desensitizer does not influence postoperative sensitivity and clinical performance of posterior restorations: A 24-month randomized clinical trial.

OBJECTIVES: To evaluate the influence of a glutaraldehyde-based desensitizer (GL) on postoperative sensitivity (POS) in posterior bulk-fill resin composite restorations using an adhesive applied in the self-etch (SE) and etch-and-rinse (ER) strategies; and to assess the clinical performance of the restorations. METHODS: Posterior resin composite restorations (n = 228) at least 3 mm deep were inserted in 57 subjects using a split-mouth design. The adhesive was applied with/without prior application of a GL. A resin composite was used for all restorations. Spontaneous POS (risk and intensity), as well as POS caused by stimulation with an air blast and assess the response to horizontal and vertical percussion was assessed using two scales in the baseline and after 7, 14, and 30 days. In addition, some parameters were evaluated using FDI criteria up to 24 months of clinical service. RESULTS: No significant POS was observed (p > 0.05). A higher absolute risk and intensity of spontaneous POS was observed within 7 days (35.1%), without statistically significant differences among groups. At 24 months 5 restorations were considered clinically unsatisfactory, and 73 restorations showed minor discrepancies in adaptation, with no significant differences between groups (p > 0.05). SIGNIFICANCE: A GL agent does not influence POS in posterior restorations with bulk-fill resin composite. It may be considered a dispensable clinical step in the restorative protocol.

Development of clinical criteria for the evaluation of indirect restorations.

OBJECTIVE: To propose the development and validation of criteria for evaluating the clinical performance of indirect restorations, considering the variables related to the operator, material, and/or patient. MATERIALS AND METHODS: The experimental design of this study was divided into three stages. Stage 1: development of the new criteria items by specialists in Prosthodontics. Step 2: creation of the criteria, named UERJ criteria, with the description of the parameters that indicate the quality of the restoration, the possible associated complications, and a detailed description of each classification. As well as the development of a form of variables. Step 3: validation of the UERJ criteria. RESULTS: Cohen's Kappa statistic registered for both intra- and inter-examiner agreements a coefficient >0.91 with a p-value <0.0001. The validity of the UERJ criteria was evaluated by tests of sensitivity (0.96) and specificity (0.91) and had a satisfactory accuracy (92.7%), a positive (10.99), and negative (0.05) likelihood ratio and high values predictive variables, with positive (PPV) 0.84 (high specificity) and negative (VPN) 0.98 (high sensitivity), with a confidence interval of 95%. CONCLUSION: The UERJ criteria is a valid instrument for evaluating the clinical performance of indirect restorations. CLINICAL SIGNIFICANCE: The UERJ criteria, developed exclusively for the analysis of indirect restorations, elucidates the details necessary to identify the causes of failures and complications of these restorations.