Aumento de coroa clínica: reparação do desequilíbrio dentogengival com finalidade estética / Clinical crow augmentum: repair of the dentogengival imbalance with aesthetic purpose

O anseio por um sorriso harmônico tem se tornado cada vez maior, uma vez que muitos pacientes relatam desconforto ao sorrir, pois correlacionam a estética do sorriso a problemas de baixa autoestima e em alguns casos suscetibilidade a alterações psicossociais decorrente aos padrões estéticos impostos pela sociedade. O sorriso gengival é uma das grandes queixas relatadas por pacientes. A exposição excessiva de gengiva maxilar pode ser decorrente a fatores gengivais, ósseos, dentários e musculares. Dentre os tratamentos disponíveis para diminuir essa exposição, contamos com cirurgias periodontais, aplicação de toxina botulínica, tratamentos ortodônticos, cirurgia ortognática e reposicionamento labial. O tratamento adequado será definido de acordo com o fator etiológico de cada caso. Diante disso o objetivo do trabalho é realizar um relato de caso sobre aumento de coroa clínica estética. A paciente estava descontente com a exibição de uma grande quantidade gengival ao sorrir. Após estudos clínicos e de imagem o diagnóstico foi de erupção passiva alterada, tipo IB. O tratamento de escolha foi a gengivoplastia associada a remodelação óssea osteotomia e osteoplastia. O tratamento estético vai além de uma boa aparência, através deste trabalho, foi possível evidenciar impactos benéficos que o sorriso harmônico pode acarretar na vida do indivíduo, atendendo suas expectativas e a do cirurgião-dentista(AU)

The desire for a harmonic smile has become increasing, since many patients report discomfort when smiling, as they correlate smile aesthetics to problems of low self-esteem and in some cases susceptibility to psychosocial changes due to aesthetic standards imposed by society. Gummy smile is one of the major complaints reported by patients. Excessive exposure of the maxillary gingiva may be due to gingival, bone, dental and muscular factors. Among the treatments available to reduce this exposure, we have periodontal surgeries, botulinum toxin application, orthodontic treatments, orthognathic surgery and lip repositioning. The appropriate treatment will be defined according to the etiological factor of each case. Therefore, the objective of this work is to carry out a case report on aesthetic clinical crown augmentation. Patient discount with the display of a large amount of gingival when smiling. After clinical and imaging studies, the diagnosis was an altered passive eruption, type IB. The treatment of choice was gingivoplasty associated with bone remodeling, osteotomy and osteoplasty. Final comments and conclusions: The aesthetic treatment goes beyond a good appearance, through this work, it was possible to evidence beneficial impacts that the harmonic smile can have on the individual's life, meeting their expectations and that of the dentist(AU)

Establishment of a 3D esthetic analysis workflow on 3D virtual patient and preliminary evaluation.

BACKGROUND: In esthetic dentistry, a thorough esthetic analysis holds significant role in both diagnosing diseases and designing treatment plans. This study established a 3D esthetic analysis workflow based on 3D facial and dental models, and aimed to provide an imperative foundation for the artificial intelligent 3D analysis in future esthetic dentistry. METHODS: The established 3D esthetic analysis workflow includes the following steps: 1) key point detection, 2) coordinate system redetermination and 3) esthetic parameter calculation. The accuracy and reproducibility of this established workflow were evaluated by a self-controlled experiment (n = 15) in which 2D esthetic analysis and direct measurement were taken as control. Measurement differences between 3D and 2D analysis were evaluated with paired t-tests. RESULTS: 3D esthetic analysis demonstrated high consistency and reliability (0.973 < ICC < 1.000). Compared with 2D measurements, the results from 3D esthetic measurements were closer to direct measurements regarding tooth-related esthetic parameters (P<0.05). CONCLUSIONS: The 3D esthetic analysis workflow established for 3D virtual patients demonstrated a high level of consistency and reliability, better than 2D measurements in the precision of tooth-related parameter analysis. These findings indicate a highly promising outlook for achieving an objective, precise, and efficient esthetic analysis in the future, which is expected to result in a more streamlined and user-friendly digital design process. This study was registered with the Ethics Committee of Peking University School of Stomatology in September 2021 with the registration number PKUSSIRB-202168136.

Accuracy of three types of digital guides for crown lengthening surgery: An in vitro study.

Background/purpose: The guided protocols always yield a higher accuracy than freehand surgery. However, the accuracy of digital guides for crown lengthening surgery (CLS) is unknown. The purpose of this study was to evaluate the trueness of 3 types of digital guides for CLS. Materials and methods: Twenty individually designed maxillary models were divided into 4 groups according to surgical guides: type I (T1), type II (T2), type III (T3), and free-hand. T1 comprised a planed gingival margin at the tissue level. T2 included both the planed gingival margin and alveolar crest at the tissue level. T3 consisted of a planed gingival margin at the tissue level and an alveolar crest at the bone level. CLS was performed under the indication of the guides. Trueness of the guides was evaluated through the deviation of the gingival zenith and alveolar crest height. Results: The control group had higher vertical and horizontal distance deviations of gingival zenith compared to the 3 digital guide groups (P < 0.001). There were no significant differences among the 3 test groups in terms of gingival zenith deviations (P > 0.05). With regard to height deviation of alveolar crest, the control and T1 groups were higher than T2 group (P < 0.001), while T3 group had the lowest deviations among the 4 groups (P < 0.001). Conclusion: The digital guides assisted CLS procedures are more accurate than free-hand method. The trueness of type III guide was better than type I and type II.

An Analysis of the Esthetic Proportions of Anterior Maxillary Teeth in a School of Dentistry in Ar Rass.

BACKGROUND: There are several facets of esthetic dentistry, such as the shade and color of teeth, but the geometric or mathematical proportion aspect is among the most crucial. Theories such as the golden percentage, golden proportion, and recurring esthetic dental are presented in esthetic dentistry. MATERIAL AND METHODS: The present prospective observational research was undertaken between January 2022 and January 2023. The volunteers' cohort included individuals aged 18 to 45 years without periodontal disease, free of carious cavities and restorations in the anterior teeth, with a complete set of anterior teeth and at least one quadrant of well-aligned anterior maxillary teeth. We utilized an iPhone mobile lens (Apple Inc., Cupertino, CA) to take photos. The maximum circumference on the mesial and distal contacts of anterior teeth was used as a reference point for measurements. After data collection, a customized Excel spreadsheet (Microsoft Corporation, Redmond, WA) was formulated to facilitate mathematical analysis. RESULTS: This study was conducted on 60 dental students, 43 being male subjects and 17 female subjects. The best results in this study were seen in relation to perceived central incisor width and perceived lateral width as seen from the front. It was found that the unidentified group appears to be the most relevant group with 33 participants (52%), and Preston's proportion was the least frequent with 0 participants (0%). As expected, males appeared to have larger anterior teeth dimensions than females. CONCLUSIONS: The actual correlation between maxillary teeth width as perceived from the front view is unidentified. Golden percentage and modified Golden percentage ranked second and third. Preston's proportion did not exist. Based on our study, a new formula for calculating the relation between maxillary anterior teeth width could be raised and should be tested on a wider population.

Current state about root coverage using soft-tissue substitutes in the presence of noncarious cervical lesions: A literature review.

About half of the cases of gingival recession are associated with the noncarious cervical lesion (NCCL), resulting in combined defects (CDs). NCCL negatively affects the root coverage outcomes. In addition, considering the morbidity associated with graft harvesting, soft-tissue substitutes (STSs) appeared as a suitable option for connective tissue grafts for surgical root coverage. Currently, the literature addressing the therapy of CDs employing STSs is scarce. Thus, the present review aimed to update the literature and outline the future perspectives about root coverage of CDs using STSs. A detailed literature search was conducted on MEDLINE, Web of Science, EMBASE, LILACS, Scopus, and Google Scholar databases using keywords and Boolean operators. Randomized clinical trials (2) and case reports (6) were included. None of the selected studies reported any adverse effect using STSs. Based on the limited evidence available, we cannot state that STSs may benefit the periodontal clinical and patient-centered outcomes. Randomized controlled trials are needed to assess the long-term outcomes, surgical approaches, and restorative protocols.

Multiple gingival recessions associated with non-carious cervical lesions treated by partial restoration and modified coronally advanced flap with either connective tissue graft or xenogeneic acellular dermal matrix: A randomized clinical trial.

BACKGROUND: This study aimed to compare a connective tissue graft (CTG) to a (porcine) xenogeneic acellular dermal matrix (XDM), both associated with modified coronally advanced flap (MCAF) and partial resin composite restoration to treat multiple combined defects (CDs). METHODS: Seventy-eight defects in 38 patients presenting multiple combined defects, that is, gingival recession associated with non-carious cervical lesions, were treated by partial resin composite restoration (apical margin up to 1 mm of the estimated cement-enamel junction) and MCAF along with CTG or XDM. After 6 months, the groups were compared with regard to clinical, patient-centered, and esthetic outcomes. RESULTS: CD coverage was 72.9% for CTG versus 50.7% for XDM (P < 0.001). Recession reduction was 2.3 mm for CTG versus 1.5 mm for XDM (P < 0.001). CTG resulted in a greater increase in keratinized tissue width (CTG: 0.96 mm vs. XDM: 0.3 mm, P = 0.04) and gingival thickness (CTG: 0.9 mm vs. XDM: 0.3 mm, P < 0.001). Both treatments successfully reduced dentin hypersensitivity and increased esthetics satisfaction, with no statistically significant intergroup differences. Moreover, XDM patients experienced a shorter surgery duration (CTG: 57.2 min vs. XDM: 37.4 min, P < 0.001) and less time to no pain (visual analog scale  =  0; CTG: 6.5 days vs. XDM: 3.5 days, P = 0.04). CONCLUSION: CTG resulted in significantly greater root coverage and increased keratinized tissue width compared to XDM for treating multiple partially restored CDs. However, increased root coverage at the CTG sites was accounted for by increased probing depth compared to the XDM sites.

Conservative smile enhancement: a case report and brief review on multidisciplinary approach in aesthetic dentistry / Tratamento conservador de sorriso: um relato de caso e breve revisão sobre abordagem multidiscplinar na odontologia estética

ABSTRACT The gingival contour, the color of the teeth and the presence of interincisal diastema are seen as unsightly factors, being highly harmful from a social point of view. The present study aimed to report a comprehensive and conservative esthetic treatment executed with a multidisciplinary approach in a 20-year-old female patient that presented darkened teeth with poor spacing and excessive gingival display while smiling, as well as present a brief literature review on multidisciplinary approach in esthetic dentistry. After clinical examination and diagnosis, a treatment plan was elaborated to meet the patient's expectations with a conservative approach. After patient consent, therapy began with supervised home-based tooth whitening with 22% carbamide peroxide applied one hour/daily for 14 days, followed with gingival recontouring surgery and, after a healing period of 30 days, diastemas closure with direct composite resin technique, occlusal adjustment, finishing, and polishing. The multidisciplinary approach was fundamental for the accomplishment of the proposed treatment, achieving satisfactory esthetic and functional results.

RESUMO O contorno gengival, a cor dos dentes e a presença de diastemas interincisivos são vistos como fatores antiestéticos, sendo altamente prejudicial do ponto de vista social. O presente estudo teve como objetivo relatar um tratamento estético conservador executado com abordagem multidisciplinar em uma paciente do sexo feminino de 20 anos que apresentava dentes escurecidos com pouco espaçamento e exposição gengival excessiva ao sorrir, bem como apresentar uma breve revisão de literatura sobre à abordagem multidisciplinar em odontologia estética. Após exame clínico e diagnóstico, foi elaborado um plano de tratamento para atender as expectativas do paciente com abordagem conservadora. Após consentimento do paciente, foi iniciada o clareamento dental supervisionado com peróxido de carbamida 22% aplicado uma hora/dia por 14 dias, seguido de cirurgia de recontorno gengival e, após um período de cicatrização de 30 dias, fechamento de diastemas com técnica de resina composta direta. Neste caso, a abordagem multidisciplinar foi fundamental para a realização do tratamento proposto, alcançando resultados estéticos e funcionais satisfatórios.

Digital approaches to facially guided orthodontic and periodontal rehabilitation in the anterior esthetic zone: A case report.

OBJECTIVE: The present case report describes digital approaches to plan an orthodontic and periodontal rehabilitation at the anterior esthetic zone. CLINICAL CONSIDERATIONS: A young patient attended to the dental practice with esthetic concerns. The facially driven digital planning showed the need of an interdisciplinary treatment to improve smile harmony. Orthodontic treatment was conducted with aligners, followed by periodontal and restorative approaches. Tooth alignment was performed with 31 aligners, whereas eight aligners were used for refinement. Harmony between pink and white esthetics was improved with crown lengthening, followed by bleaching. CONCLUSION: By using a conservative approach, a successful esthetic result was achieved respecting functional and biological principles. CLINICAL SIGNIFICANCE: Digital resources can be used to the interdisciplinary esthetic planning taking into consideration the harmony between smile and face. This approach allows a predictable outcome of the treatment.

Microabrasión e infiltración como alternativa de tratamiento para Fluorosis Dental severa: reporte de caso / Microabrasão e infiltração como tratamento alternativo para Fluorose Dentária severa: relato de caso / Microabrasion and resin infiltration for treatment of severe Dental Fluorosis: a case report

Resumen La Fluorosis Dental (FD) es un defecto del desarrollo del esmalte tipo hipomineralización atribuido a la exposición crónica y excesiva de fluoruro durante el período de amelogénesis. Clínicamente, en los casos más leves se pueden observar finas líneas blancas y opacas, mientras que en casos moderados y severos las líneas se pueden fundir y formar bandas más gruesas comprometiendo toda la superficie del diente pudiendo estar asociadas con pérdidas de estructura y cambios de color. El tratamiento de la FD puede incluir desde microabrasión, infiltración, aclaramiento y restauraciones con resina compuesta hasta carillas y coronas. El objetivo de este caso clínico fue asociar la técnica de microabrasión e infiltración como alterantiva de tratamiento estético para el manejo de la FD. Paciente de sexo femenino y 9 años que presentaba opacidades blancas en forma de bandas gruesas y pérdidas de estructura dental en los incisivos superiores permanentes (FD severa). Para el tratamiento se optó por realizar microabrasión con ácido clorhídrico, seguido de infiltración con resina de baja viscosidad, logrando un resultado estético favorable y estable a tres meses. Se concluye que la combinación de estas dos técnicas micro-invasivas es una estrategia viable y efectiva para enmascarar efectivamente opacidades producidas por la FD.

Resumo A Fluorose Dentária (FD) é um defeito de desenvolvimento do esmalte do tipo hipomineralização atribuído à exposição crônica e excessiva de fluoreto durante a amelogênese. Clinicamente, os casos leves apresentam finas linhas brancas que acompanham a formação dentária, enquanto casos moderados ou severos apresentam faixas brancas mais amplas acometendo toda a superfície e podem estar associados à perdas estruturais e pigmentações. O tratamento da FD inclui desde microabrasão, infiltração e aclaramento até restaurações com resina composta, facetas e coroas. O objetivo deste caso clínico foi associar as técnicas de microabrasão e infiltração como alternativa de tratamento estético para a abordagem da FD. Paciente do sexo feminino de 9 anos que apresentava nos incisivos superiores permanentes áreas brancas opacas e perda de estrutura (FD severa). Para o tratamento, optou-se por realizar microabrasão com ácido clorídrico, seguido de infiltração com uma resina de baixa viscosidade, atingindo um resultado estético e favorável. Conclui-se que a combinação da microabrasão e da infiltração é uma estratégia viável e efetiva para mascar efetivamente opacidades produzidas pela FD.

Abstract Dental Fluorosis (DF) is a developmental defect of the enamel type hypomineralization attributed to chronic and excessive fluoride exposure during the period of amelogenesis. Clinically, in the mildest cases fine white and opaque lines can be observed, while in moderate and severe cases the lines can melt and form thicker bands, compromising the entire tooth surface, which may be associated with loss of structure and color changes. Treatment of DF can range from microabrasion, infiltration, dental whitening, and composite resin restorations to veneers and crowns. The objective of this clinical case was to associate the microabrasion and infiltration technique as an alternative to aesthetic treatment for the management of dental fluorosis. A 9-year-old female patient presented white opacities in the form of thick bands and loss of tooth structure in the permanent upper incisors (severe dental fluorosis). For the treatment, it was decided to perform microabrasion with hydrochloric acid, followed by infiltration with low viscosity resin, achieving a favorable and stable aesthetic result after three months. It is concluded that the combination of these two micro-invasive techniques is a viable and effective strategy to effectively mask opacities produced by DF.

Dual Digitally Guided Crown Lengthening in Esthetic Area Compromised by Disharmonic Implant Crown.

INTRODUCTION: A disharmonious smile results from excessive gingival exposure or gingival margin misalignment is a frequent finding in patients. The most common cause is altered passive eruption; however, in the case presented here, the esthetics of the smile is compromised also due to an inadequate implant placement and crown fabrication. CASE PRESENTATION: This case presented a combination of altered passive eruption and a buccally as well as deeply placed implant crown (#10) that led to disproportionate dimensions of an upper lateral incisor. Dual digitally guided crown lengthening surgical procedure for teeth #5 to #12 was performed aiming a better harmony of the smile. Treatment also included placement of tooth veneers and re-made of implant crown. A pleasant smile with appropriate colors and proportions was achieved. All esthetic and periodontal health parameters were maintained throughout the follow-up period (1 year). CONCLUSION: The use of dual digitally guided crown lengthening help to accomplish precision and stability of esthetic outcome, as it guides for both, bone and soft tissue removal. Particularly, in challenging cases with high esthetic demand and complicated factors present, such as the case presented here, the digital approach provides tools to attain excellent treatment outcome.

Uma nova perspectiva na Ortodontia, tratamento híbrido 3DBOT e alinhadores ­ relato de caso / A new perspective in Orthodontics: 3DBOT hybrid treatment and aligners ­ case report

Abstract Among the most varied orthodontic techniques in orthodontics, the 3DBOT technique (Three-Dimensional Orthodontic Treatment without Brackets) stands out because it uses technology, the 3D set up, in a mandatory manner. By definition, the technique enables movements in the three dimensions of space, with high predictability of movement, does not requiring brackets as support for dental correction. The aligners ensure torque control and an excellent final detailing. This study aims to describe a clinical case of Angle Class I, with crowding of the teeth, treated with the 3DBOT fixed technique and aligners. The results were achieved in the first stage lasting 8 months, followed by the final aligners by 3 months period time. The 3DBOT technique proved to be an effective, efficient and mainly comfortable optionm (AU)

Resumo Diante das mais variadas técnicas ortodônticas existentes na Ortodontia, a técnica 3DBOT (Tratamento Tridimensional Ortodôntico sem Bráquetes) se destaca por utilizar a tecnologia, o set up 3D, de forma obrigatória. Por definição, a técnica possibilita movimentos nas três dimensões do espaço, com alta previsibilidade dos movimentos, não necessitando dos bráquetes como suporte para a correção dentária. Os alinhadores asseguram o controle dos torques e um excelente detalhamento final. O presente estudo visa descrever um caso clínico de Classe I de Angle, com apinhamentos dentários, tratada com a técnica fixa 3DBOT e alinhadores. Os resultados foram alcançados na primeira etapa com duração de 8 meses, seguidos dos alinhadores finais por 3 meses. A técnica 3DBOT demonstrou ser uma opção eficaz, eficiente e principalmente confortável. (AU)

Effect of Zirconia Silica Nanofibers on Flexural Strength of Feldspathic Ceramic - An Experimental Study.

BACKGROUND: Dental ceramics exhibit good optical and esthetic properties due to their translucency. Feldspathic ceramic is the most widely used veneering ceramic with brittleness, which accounts for most of its failure. Hence, this study was done to evaluate and compare the flexural strength of feldspathic ceramic reinforced with zirconia-silica nanofibers in the ratio of 2.5, 5, and 7.5 wt% with conventional feldspathic ceramic. MATERIALS AND METHODS: According to ISO 6872, a master die was prepared from which resin bars were fabricated with 4.0 mm in width × 1.2 mm thickness × 25.0 mm length, Zirconia-silica nanofibers were produced by sol-gel electrospinning go around with calcination and blended with feldspathic ceramic through ball milling method. The samples were prepared with 0, 2.5, 5, 7.5 wt% nanofibers reinforced ceramic. The flexural strength of the samples was evaluated using three-point bending test. RESULTS: The flexural strength values of zirconia-silica nanofibers reinforced ceramic groups were higher than control group. There was a gradual increase in the flexural strength values of felspathic ceramic groups with increase in wt% of nanofibers. CONCLUSION: The flexural strength of feldspathic ceramic samples reinforced with zirconia-silica nanofibers by 5 and 7.5 wt% were statistically significant compared to control, whereas the flexural strength of 2.5 wt% was statistically insignificant compared to the control group.

Central incisors shape and proportions prevalence in Argentinian university students: by visual assessment and a new standardized method.

The aim of this study was to analyze the dimensions of the clinical crown of upper central incisors and the prevalence of tooth shapes by two different protocols. Assessment was performed on each of the 111 dental stone type V maxillae models of students of dentistry from Buenos Aires University [93 females and 18 males, mean age 23.70 (± 2.26) years] The mesial and distal-vestibular angles were defined on each right upper incisor, and the following segments were defined: AB (zenith - incisal edge), CD, EF, GH (apical, middle, and incisal thirds - vestibule - mesial and vestibule-distal angles) and their lengths were determined with a precision caliper. Then, the CD/AB, EF/AB and mean CD-EF/AB ratios were calculated. Shapes were assessed by four independent observers, three of whom evaluated digital images of the models, while the fourth had no access to the images, and determined the shapes using an algorithm developed from the dimensions of the studied segments. Rates and confidence intervals were determined, and Fleiss' Kappa was calculated to assess the agreement among the evaluators who worked with the images and among all of them. Average incisor length was 10 mm, and widths at CD and EF were 7.35 mm (0.65) and 8.27 mm (0.58), respectively. Regarding shapes, 51.58% (47.90-55.20) of the incisors were identified as square, 18.02% (14.50-21.90) as ovoid and 30.41% (30.00-30.90) as triangular. Fleiss' Kappa agreement was 0.71 (0.62-0.80). The application of the proposed algorithm provided a considerable level of agreement among the observers. Regarding tooth size, both the average segment length and the proportions were similar to those reported by various authors.

El objetivo de este trabajo fue analizar las dimensiones de las coronas clínicas de incisivos centrales superiores, y la prevalencia de cada una de las formas dentarias según diferentes formas de determinación. Se utilizaron modelos de yeso tipo V de 111 estudiantes (93 mujeres y 18 varones) con una media de edad de 23,70 (± 2,26) años. Se definieron los ángulos vestíbulo - mesial y distal para los incisivos centrales superiores derechos (1.1), se definieron los siguientes segmentos: AB (cenit - borde incisal), CD, EF, GH (tercios apical, medio e incisal - ángulos vestíbulo - mesial y vestíbulo- distal) y se determinaron sus longitudes con un calibre de precisión. Se calcularon las proporciones CD/AB, EF/AB y media CDEF/ AB. Las formas de las piezas dentarias fueron identificadas por cuatro observadores independientes, tres lo hicieron mediante la evaluación de imágenes digitales de los modelos confeccionados. El cuarto observador, sin acceso a las imágenes, asignó a cada pieza una de las formas determinadas mediante la aplicación de un algoritmo elaborado ad-hoc. Se obtuvieron tasas e intervalos de confianza y se calculó Kappa de Fleiss para valorar la concordancia entre evaluadores. La longitud promedio fue de 10 mm y el ancho en los segmentos CD y EF fueron de 7.35 mm (0.65) y 8.27 mm (0.58) respectivamente. En cuanto a formas el 51,58% (47.90-55.20) de los incisivos estudiados fueron identificados como cuadrados, el 18.02% (14.50-21.90) como ovoides y el 30,41% (30.00-30.90) triangulares. La concordancia de Kappa de Fleiss fue de 0.71 (0.62-0.80). La aplicación del algoritmo propuesto alcanzó un nivel de concordancia considerable entre los evaluadores. En cuanto al tamaño dentario, tanto la longitud promedio de los segmentos estudiados como las proporciones halladas son similares a las reportadas por diversos autores.

Color assessment of resin composite by using cellphone images compared with a spectrophotometer.

OBJECTIVES: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone. MATERIALS AND METHODS: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters. The color of the specimens was measured in the images using RGB system and converted to CIELab system using image processing software. Whiteness index (WID) and color differences (ΔE00) were calculated for each color measurement method. For the cellphone, the ΔE00 was calculated between the pairs of shades in separate images and in the same image. Data were analyzed using 2-way repeated-measures analysis of variance (α = 0.05). Linear regression models were used to predict the reference ΔE00 values of those calculated using color measured in the images. RESULTS: Images captured with the cellphone resulted in different WID values from the spectrophotometer only for shades A3 and A4. No difference to the reference ΔE00 was observed when individual images were used. In general, a similar ranking of ΔE00 among resin composite shades was observed for all methods. Stronger correlation coefficients with the reference ΔE00 were observed using individual than pairwise images. CONCLUSIONS: This study showed that the use of cellphone images to measure the color difference seems to be a feasible alternative providing outcomes similar to those obtained with the spectrophotometer.

Central incisors shape and proportions prevalence in Argentinian university students / Prevalencia de forma y tamaño de los incisivos centrales en estudiantes universitarios argentinos

ABSTRACT The aim of this study was to analyze the dimensions of the clinical crown of upper central incisors and the prevalence of tooth shapes by two different protocols. Assessment was performed on each of the 111 dental stone type V maxillae models of students of dentistry from Buenos Aires University [93 females and 18 males, mean age 23.70 (± 2.26) years] The mesial and distal-vestibular angles were defined on each right upper incisor, and the following segments were defined: AB (zenith - incisal edge), CD, EF, GH (apical, middle, and incisal thirds - vestibule - mesial and vestibule-distal angles) and their lengths were determined with a precision caliper. Then, the CD/AB, EF/AB and mean CD-EF/AB ratios were calculated. Shapes were assessed by four independent observers, three of whom evaluated digital images of the models, while the fourth had no access to the images, and determined the shapes using an algorithm developed from the dimensions of the studied segments. Rates and confidence intervals were determined, and Fleiss' Kappa was calculated to assess the agreement among the evaluators who worked with the images and among all of them. Average incisor length was 10 mm, and widths at CD and EF were 7.35 mm (0.65) and 8.27 mm (0.58), respectively. Regarding shapes, 51.58% (47.90-55.20) of the incisors were identified as square, 18.02% (14.50-21.90) as ovoid and 30.41% (30.00-30.90) as triangular. Fleiss' Kappa agreement was 0.71 (0.62-0.80). The application of the proposed algorithm provided a considerable level of agreement among the observers. Regarding tooth size, both the average segment length and the proportions were similar to those reported by various authors.

RESUMEN El objetivo de este trabajo fue analizar las dimensiones de las coronas clínicas de incisivos centrales superiores, y la prevalencia de cada una de las formas dentarias según diferentes formas de determinación. Se utilizaron modelos de yeso tipo V de 111 estudiantes (93 mujeres y 18 varones) con una media de edad de 23,70 (± 2,26) años. Se definieron los ángulos vestíbulo - mesial y distal para los incisivos centrales superiores derechos (1.1), se definieron los siguientes segmentos: AB (cenit - borde incisal), CD, EF, GH (tercios apical, medio e incisal - ángulos vestíbulo - mesial y vestíbulo- distal) y se determinaron sus longitudes con un calibre de precisión. Se calcularon las proporciones CD/AB, EF/AB y media CDEF/ AB. Las formas de las piezas dentarias fueron identificadas por cuatro observadores independientes, tres lo hicieron mediante la evaluación de imágenes digitales de los modelos confeccionados. El cuarto observador, sin acceso a las imágenes, asignó a cada pieza una de las formas determinadas mediante la aplicación de un algoritmo elaborado ad-hoc. Se obtuvieron tasas e intervalos de confianza y se calculó Kappa de Fleiss para valorar la concordancia entre evaluadores. La longitud promedio fue de 10 mm y el ancho en los segmentos CD y EF fueron de 7.35 mm (0.65) y 8.27 mm (0.58) respectivamente. En cuanto a formas el 51,58% (47.90-55.20) de los incisivos estudiados fueron identificados como cuadrados, el 18.02% (14.50-21.90) como ovoides y el 30,41% (30.00-30.90) triangulares. La concordancia de Kappa de Fleiss fue de 0.71 (0.62-0.80). La aplicación del algoritmo propuesto alcanzó un nivel de concordancia considerable entre los evaluadores. En cuanto al tamaño dentario, tanto la longitud promedio de los segmentos estudiados como las proporciones halladas son similares a las reportadas por diversos autores.

Influence of toothbrush abrasion and surface treatments on the color and translucency of resin infiltrated hybrid ceramics.

PURPOSE: The study compared the color change, lightness, and translucency of hybrid resin ceramics exposed to toothbrush abrasion and surface treatment. MATERIALS AND METHODS: Four hybrid ceramics [Lava Ultimate (LU), Vita Enamic (EN), Shofu HC (SH), and Crystal Ultra (CU)] were compared with a glass-ceramic (Vita Mark II) control. One hundred and twenty specimen blocks were prepared using a precision saw machine. Specimens in each material were divided into four subgroups based on the surface treatment (polishing or staining) and a storage medium (water or citric acid). Simulated tooth brushing with a mixture of 100 RDA (radioactive abrasives) with 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Measurements for the color change, lightness, and translucency were measured after toothbrushing using a spectrophotometer. Statistical analysis compared outcomes using paired t-test, ANOVA, and Tukey post hoc test. RESULTS: The maximum color change was identified in SH (stained acid) [1.44 (0.40)], whereas the lowest was identified in EN (polished water) [0.66 (0.16)] material. The maximum and minimum loss of surface translucency was observed in SH (polished water) [12.3 (0.52)] and EN (stained acid) [6.5 (0.55)] specimens, respectively. Lastly, loss of lightness was the highest in VM (polished acid) [69 (0.95)], whereas the lowest was observed in CU (stained water) [56.7 (0.86)]. CONCLUSION: The comparison presented a significant effect of toothbrush abrasion on translucency and lightness of the hybrid resin ceramics. Color change was not significantly influenced irrespective of the storage medium employed. Surface staining demonstrated the preservation and stability of color and optical properties under the influence of toothbrush abrasion and chemical trauma.

Color heterogeneity and individual color changes in dentin and enamel bleached in the presence of a metallic orthodontic bracket.

OBJECTIVE: This in-vitro study evaluated the color changes in enamel and dentin bleached in the presence of an orthodontic bracket, as well as the heterogeneity of the color and contribution of each tissue to the color change (CTCC). MATERIALS AND METHODS: Enamel-dentin specimens from extracted bovine teeth were bleached before or after bracket removal or maintained without any treatment (control). The colors of the dentin and enamel were measured individually and after recombining these substrates. The changes in the color (ΔE00 ) and whitening index (ΔWID) were estimated by the color difference between the bleached specimens and those of the control. The CTCC was also calculated by recombining the tissues from different treatments. Images of specimens obtained from a stereomicroscope were used to analyze the color homogeneity within each tissue. RESULTS: The highest values of ΔE00 and ΔWID were observed in the specimens bleached in the absence of a bracket. Bleaching in the presence of a bracket resulted in enamel with a center that was whiter than the periphery. Dentin and enamel presented similar CTCC values. CONCLUSIONS: Tooth bleaching performed in the presence of a metallic bracket resulted in a reduced bleaching effect and increased color heterogeneity within both tissues. CLINICAL SIGNIFICANCE: Tooth bleaching before the orthodontic bracket removal reduces the bleaching effect in both dentin and enamel. Moreover, a heterogeneous color of enamel surface can be observed after tooth bleaching in the presence of a nickel-free metallic orthodontic bracket.

Assessment of Severity of Malocclusion and Orthodontic Treatment Need Using the Dental Esthetic Index and Angle's Classification: A Retrospective Study.

INTRODUCTION: Angle's classification is the most widely used instrument for evaluation of malocclusion. The dental esthetic index (DAI) is a reliable, valid, and universally accepted cross-cultural index adopted by the World Health Organization (WHO) that links objective, clinical, and subjective esthetic factors to produce a single score that reflects the severity and the treatment needs of the malocclusion. The present study aims to evaluate Angle's classification and DAI to assess the severity of malocclusion and treatment needs. MATERIALS AND METHODS: This retrospective cross-sectional study was done on pretreatment orthodontics records of 145 male patients and 153 female patients in the age-group 9-42 years with malocclusion who had received or were undergoing orthodontic treatment in the orthodontic department clinics of the College of Dentistry, Jazan University. Preorthodontic study casts, orthopantomography, and lateral cephalometric X-rays were analyzed. DAI scores were calculated, and treatment needs were assessed. Angle's classification of malocclusion was also noted. RESULTS: Among patients with normal or minor malocclusion (DAI score ≤25), a significantly higher percentage of patients were class I (58%) than any other class of malocclusion. Among patients determined to have handicapping malocclusion (DAI score ≥36), significantly higher percentage of patients were class II/1 (44%) than any other class of malocclusion. Class II/1 showed the highest percentage of definite (24%) (DAI score 26-30), severe (19%) (DAI score 31-35), and handicapping malocclusions (44%) (DAI score ≥36). A total of 26% of patients had skeletal class I. A total of 38% of patients had skeletal class II. A total of 36% of patients had skeletal class III. Approximately 13% of patients had maxillary canine impactions and 3% of patients had mandibular canine impactions. CONCLUSION: The study reported 35% of patients were having handicapping malocclusion (DAI ≥36) and 14% having severe malocclusion (DAI score 31-35). The malocclusion was characterized by a high frequency of anterior crowding. Thus, the complementary use of DAI and Angle's classification, with improvements, helps establish an all-inclusive criterion for screening and prioritizing of patients eligible for receiving subsidized, publicly funded orthodontic care and thus allows better use of limited available resources.

Effect of different placement techniques on color stability and surface roughness of resin composites / Efeito das técnicas de inserção e alisamento na estabilidade de cor e rugosidade superficial de resinas compostas

Abstract Introduction Longevity and clinical success of dental restorations can be influenced by many factors during the restorative procedures. Objective This study aimed to evaluate the influence of different placement techniques on color stability and surface roughness of two resin composites. Material and method The groups of specimens (n=10) were divided according to resin composite (FiltekTM Z250 XT and FiltekTM Z350 XT) and placement technique: Mylar strip, spatula, dry brush, modeling liquid, and surface sealant. Color stability and surface roughness were accessed using a spectrophotometer (CIELab color space) and a rugosimeter (standard cutoff of 0.8 mm), respectively, after water storage. Subsequently, the specimens were immersed in coffee for 48 h and final color was measured. The data were analyzed using ANOVA and the Tukey's post hoc test (α=5%) and the correlation between surface roughness (Ra) and color change (∆Eab) was assessed using the Pearson's correlation coefficient. Result The different placement techniques influenced Ra and ∆Eab on both resin composites. The groups treated with surface sealant showed greater difference in ∆Eab for both resin composites. The FiltekTM Z250 XT resin showed greater color stability compared with the FiltekTM Z350 XT resin regardless of the placement technique used. Ra of each placement technique was similar among the resin composites except for the FiltekTM Z350 XT modeling liquid group, which presented lower Ra values compared with those of FiltekTM Z250 XT. A correlation between Ra and staining was identified (p=0.268). Conclusion Color stability and Ra are influenced by different placement techniques.

Resumo Introdução A longevidade e o sucesso clínico das restaurações dentárias podem ser influenciados por muitos fatores durante os procedimentos restauradores. Objetivo Avaliar a influência da técnica de alisamento na estabilidade de cor e rugosidade superficial de duas resinas compostas. Material e método Os grupos de amostras (n=10) foram divididos conforme a resina composta (FiltekTM Z250 XT e FiltekTM Z350 XT) e as técnicas empregadas: tira de poliéster, espátula, pincel seco, selante de superfície. A cor e a rugosidade da superfície foram avaliadas por espectrofotômetro (espaço de cor CIELab) e rugosímetro (corte padrão de 0,8 mm), respectivamente, após o armazenamento em água. Posteriormente, as amostras foram imersas em café por 48h e a cor final foi aferida. Os dados foram analisados usando teste ANOVA e Tukey post hoc (α = 5%) e a correlação entre rugosidade da superfície (Ra) e variação de cor (∆Eab) através do coeficiente de correlação de Pearson. Resultado As técnicas de alisamento influenciaram a Ra e a ∆Eab em ambas as resinas compostas. Os grupos tratados com selante de superfície apresentaram maior diferença na ∆Eab. A resina FiltekTM Z250 XT apresentou maior estabilidade de cor comparada à FiltekTM Z350 XT, independentemente da técnica utilizada. A Ra das técnicas de alisamento foi semelhante entre os compósitos, exceto para o grupo do líquido modelador da FiltekTM Z350 XT, que apresentou os menores valores. Uma correlação entre Ra e manchamento (p = 0,268) foi identificada. Conclusão A estabilidade da cor e a Ra são influenciadas pelas técnicas de alisamento utilizadas.

Tratamiento Rehabilitador Estético-Oclusal con Resinas Compuestas en una Paciente con Mordida Profunda y Desgaste Severo / Aesthetic-Occlusal Rehabilitation Treatment with Composite Resins in a Patient with Deep Bite and Dental Wear

RESUMEN: La rehabilitación oral tradicional del paciente con mordida profunda y braquifacial puede ser muy compleja e invasiva, sin embargo, podría involucrar muchas especialidades para su resolución ideal. Un análisis integral estético-oclusal es necesario antes de empezar el tratamiento para hacer propuestas con el menor costo biológico, de tiempo y económico. La odontología adhesiva permite una propuesta aditiva y no invasiva como un tratamiento de mediano plazo o transitorio. Este artículo presenta un caso de una paciente de 46años de edad con mordida profunda anterior y desgaste dental severo en las caras palatinas de los dientes antero-superiores, sin disfunción temporomandibular, ni compromisos sistémicos. Se destaca la rehabilitación estética- oclusal con el mínimo compromiso biológico (ultra-conservadora), mediante restauraciones adhesivas semi-indirectas de resina compuesta con acompañamiento de 12meses. Esta propuesta rehabilitadora con resinas compuestas representa una alternativa de tratamiento para el manejo del paciente con mordida profunda anterior. El control a un año de tratamiento demostró que se siguió una secuencia y resolución que aseguró los principios de la rehabilitación oral, al mismo tiempo, se procedió de la manera menos invasiva posible.

ABSTRACT: The traditional oral rehabilitation of the patient with deep bite and brachifacial can be very complex and invasive, however, a number of treatments could be considered to improve rehabilitation. A comprehensive aesthetic-occlusal analysis is necessary prior to starting treatment in order to consider the best procedure, time involved, and economic cost. Adhesive dentistry allows an additive and non-invasive proposal as a medium-term or transitory treatment. A case of a 46-year-old patient is presented, with anterior deep bite and severe dental wear on palatal surfaces of the antero-superior teeth, without temporomandibular dysfunction, or systemic compromises. The objective was to emphasize the aesthetic and occlusal rehabilitation with the least biological commitment (ultraconservative), through semi-indirect adhesive restorations of composite resin with 12 months follow-up. This restorative proposal with composite resins represents an alternative treatment for patient management with anterior deep bite. Control at one year of treatment showed that a sequence and resolution was followed, that ensured adequate oral rehabilitation in the least invasive manner possible.