Digital-assisted multidisciplinary treatment for complex occlusal rehabilitation: an 18-month follow-up case report.

BACKGROUND: This case report highlights the importance of standardized and fully digital sequential treatment in complex occlusal rehabilitation cases. To fully resolve the patient's dental needs, such cases often require multidisciplinary interventions including periodontal therapy, endodontic treatment, anterior esthetics, implant restoration, and prosthetic rehabilitation. A fully digital workflow (including facial scanners, intraoral scanners, jaw motion tracking systems, virtual articulators, and computer-aided design software) streamlined the complex treatment, enhancing workflow simplicity, efficiency, visibility, and precision. CASE PRESENTATION: The patient presented with decreased chewing efficiency of the upper and lower prostheses, along with unsatisfactory esthetic appearance of the anterior teeth. After physical examination and radiological assessment, this complex occlusal rehabilitation case required periodontal therapy, anterior esthetic enhancement, implant restoration, and fixed prosthetic rehabilitation. Therefore, a fully digital workflow was adopted. Full-crown prostheses were placed on teeth 13, 23, and 34; a fixed bridge encompassed positions 32 to 42, and single implant crowns were placed on teeth 35 and 36. Implant-supported fixed bridges were constructed for teeth 12 to 22 and 44 to 46, anchored by implants at teeth 12, 22, 44, and 46. All definitive prostheses were fabricated from zirconia ceramics, chosen for their durability and esthetic characteristics. Finally, restorations with satisfactory esthetic and functional characteristics were seated, preserving the tooth and its supporting structures. During treatment and follow-up, the T-scan occlusal analysis system was utilized to continuously monitor and guide the adjustment of occlusal distribution across the patient's dental arches. After 18 months, the patient remains satisfied with the definitive restorations. CONCLUSIONS: This report is intended to help dentists understand and implement standardized and fully digital workflows during the management of complex occlusal rehabilitation cases; it may also facilitate harmonious integration of esthetic and functional characteristics.

Fully digital workflow of occlusal reconstruction treatment in a patient with congenital dentition defects.

OBJECTIVE: Occlusal reconstruction is a critical intervention for patients with dental hard tissue defects, temporomandibular joint (TMJ) disorders, and jaw position abnormalities. Clinical efficiency and outcomes of these procedures have improved with advances in digital technologies. This case report aims to illustrate a comprehensive digital workflow for occlusal reconstruction in a patient with congenital dentition defects, emphasizing the application of digital technologies to enhance treatment outcomes. CLINICAL CONSIDERATIONS: A 28-year-old woman with previously installed porcelain-fused-to-metal bridge restorations presented with a fractured prosthesis and TMJ symptoms. A multidisciplinary approach was adopted involving the use of digital facebow, intraoral scanners, digital smile design, and CAD/CAM technologies. The process included the extraction of defective restorations, temporary restorations to refine jaw position, and final permanent restorations. The digital workflow facilitated precise diagnostics and treatment, culminating in the successful installation of permanent restorations. Regular follow-ups at one- and three-months post-treatment confirmed stable occlusal function and high patient satisfaction. CONCLUSIONS: This case report showcases the potential of multiple digital technologies to streamline complex dental treatments and achieve high-quality results. CLINICAL SIGNIFICANCE: The integration of digital technologies in occlusal reconstruction treatments offers significant benefits in terms of precision, patient comfort, and esthetic outcomes.

Restoration of a dental defect in a patient with ectodermal dysplasia: a case report and literature review / 口腔疾病防治

Objective@#To explore the treatment options for congenitally missing teeth in patients with ectodermal dysplasia and provide a clinical reference.@*Methods@#A patient with ectodermal dysplasia with a concave midface, anterior protrusion of the chin, and underdevelopment of the lower third of the face presented with congenital loss of multiple maxillary teeth, malocclusion of the remaining teeth, congenital loss of mandibular dentition, small dental arches, and upper and lower alveolar bone hypoplasia. The patient was treated by means of a removable partial maxillary prosthesis, implants in the anterior region of the lower mandible designed with the assistance of digital guides, and bar-clamped implant-overlay prostheses. A literature review of the protocol for the treatment of this condition was also conducted.@*Results@#In addition to good retention and stability after denture wear, an excellent occlusal relationship, improvement of the patient's facial appearance, including upper and lower lip fullness, more equal balancing of the lower and middle 1/3 of the face, and improved masticatory function were achieved. The results of the literature review showed that patients with ectodermal dysplasia who are congenitally edentulous usually have a complex intraoral situation that makes restoration difficult, and common restorative modalities for these patients include fixed bridges, removable partial dentures, complete dentures, overdentures, and implant prostheses, which need to be selected according to the actual intraoral situation of each patient. Currently, there is no consensus on the treatment of congenitally missing teeth in patients with ectodermal dysplasia, and some scholars have suggested that fixed restorations be recommended for patients with fewer missing teeth, while the option of removable or implant-covered denture restorations should be given to patients with more missing teeth, with removeable prostheses for underage patients that are replaced with permanent fixed prostheses when the jaws have stabilized.@*Conclusion@#In patients with ectodermal dysplasia with congenital tooth loss, all factors should be taken into account, and an individualized restorative plan should be developed.

Factors influencing the accuracy of intraoral impression in implant restoration / 口腔疾病防治

@#Due to advances in digital technology, intraoral impressions have been increasingly used to fabricate implant restorations because of its simplicity, high efficiency, comfortableness and convenience. In clinical practice, the accuracy of intraoral impressions depends on various factors, including scanner technique, status of dentition and implants, auxiliary devices, materials and environment, which might influence its accuracy and limit its application. When applied to patients missing more teeth, its accuracy may be insufficient. It is suggested that intraoral impressions be used cautiously when there are multiple and far apart implants and that the scan body not be tightened excessively and that maintain appropriate environmental conditions. In this article, we have reviewed recent relevant literature and the factors affecting the accuracy of intraoral impressions for implant restoration.

Dental implant restoration for dentition defects improves clinical efficacy, masticatory function and patient comfort.

OBJECTIVE: The aim of this study is to demonstrate if dental implant restoration can improve the clinical efficacy, masticatory function and comfort in patients with dentition defects. METHODS: The clinical data of 90 patients with single tooth loss treated in Yuyao People's Hospital of Zhejiang Province from May 2018 to May 2020 were analyzed retrospectively. The patients were enrolled and divided into two groups. The control group (CG; n=45) was intervened by traditional fixed partial denture (FPD) restoration, and the observation group (OG; n=45) was treated with dental implant restoration. The clinical efficacy was evaluated, and amelioration of tooth-related indexes and clinical indicators 2 years after treatment were observed. The improvement of masticatory function and comfort scores were compared. The adverse reactions during treatment were recorded, and patients' satisfaction with the treatment was calculated. Logistic regression was performed to assess the independent risk factors for inefficacy of the treatments. RESULTS: After treatment, the OG presented with lower gingival index, plaque index and sulcus bleeding index.

Peri-implant crevicular fluid SIRT1 levels decrease in patients with peri-implant inflammatory: A prospective observational study.

BACKGROUND: A dental Implant is a prosthetic device made of alloplastic materials implanted into the bone to provide retention and support for a dental prosthesis. Sirtuin1 (SIRT1) molecule, a nicotinamide adenine dinucleotide (NAD)-dependent histone deacetylase, regulates a variety of physiological and pathological processes, including oxidative stress, metabolism, cell proliferation, cell differentiation, inflammatory, and apoptosis. We explored whether the expression of SIRT1 correlates in patients receiving implants with peri-implant mucositis (PIM) and peri-implantitis (PI) in comparison to patients with healthy peri-implant area (PIH). METHODS: A number of 198 patients with dentition defects were enrolled in the study after their implants were functional for at least 6 months. All 198 subjects were divided into 3 groups: 1) control patients with PIH healthy implants; 2) patients with PIM mucositis; and 3) patients with PI implantitis. To distinguish these three groups, peri-implant crevicular fluid (PICF) was collected by inserting a sterile paper strip into the gap around the implant and the levels of SIRT1 and cytokines were measured by the enzyme linked immunosorbent assay (ELISA). Demographic and clinical data included age, sex, Body Mass Index (BMI), probing depth (PD), plaque index (PLI), bleeding on probing (BOP), oral health impact profile (OHIP-14), history of periodontitis and the use time of implants. RESULTS: The PD, PLI, OHIP-14 evaluation scores in patients with periodontitis of PIM mucositis and PI implantitis were all significantly higher than in patients with PIH healthy implants. Overall, the SIRT1 levels in PICF of the PIM and PI patients were significantly lower than of the PIH patients. In comparison with PIM patients, SIRT1 levels of the PI patients were remarkably lower than the PIH patients. Pearson's analysis showed that SIRT1 levels were negatively correlated with levels of interleukin (IL)-6, C-reactive protein (CRP) and IL-1ß in patients with PIM and PI. We suggest that SIRT1 levels could serve as a potential diagnostic biomarker of PI or PIM. The PICF levels of SIRT1, CRP, IL-6, IL-1ß and the history of periodontitis were the risk factors for patients with peri-implant inflammatory process. CONCLUSION: The measurement of SIRT1 expression in PICF may serve as a biomarker for the ongoing inflammatory process in patients with dental implants. The low SIRT1 levels correlated with PI implantitis and PIM mucositis as well as the elevated levels of pro-inflammatory cytokines (CRP, IL-6 and IL-1ß).

Orthodontic treatment combined with 3D printing guide plate implant restoration for edentulism and its influence on mastication and phonic function.

BACKGROUND: Dentition defect, a common clinical oral disease developed in humans, not only causes masticatory dysfunction and articulation difficulties but also affects facial appearance and increases the burden on the intestinal tract. Restorative treatment is the primary option for this disease. However, traditional restorations have many drawbacks, such as mismatch with the body, low reliability, and incomplete occlusal function recovery. AIM: to analyze the efficacy of orthodontics combined with 3D printing guide plate implant restoration in treating patients with dentition defects and its influence on masticatory and phonic functions. METHODS: A prospective study was carried out in 86 patients with dentition defects who received implant prosthesis after orthodontic treatment in our hospital between January 2018 and January 2019. Those patients were divided into a control group and an intervention group with 43 patients in each group using a random number table. The control group received traditional implant restoration, whereas the intervention group received 3D printing guide plate implant restoration. Treatment outcomes, cosmetic appearance, dental function, implant deviation, and quality of life were compared between the two groups. RESULTS: The overall response rate in the intervention group was significantly higher than that in the control group (95.35% vs 81.40%, χ 2 = 4.071, P = 0.044). The number of cases with neatly trimmed cosmetic appearance (χ 2 = 4.497, P = 0.034), complete coverage (χ 2 = 4.170, P = 0.041), and normal occlusion (χ 2 = 5.512, P = 0.019) in the intervention group was higher than that in the control group. After treatment, mastication, swallowing, and articulation were significantly improved in both groups. Masticatory (t = 2.980, P = 0.004), swallowing (t = 2.199, P = 0.031), and phonic functions (t = 3.950, P = 0.004) were better in the intervention group than those in the control group. The deviation value and the deviation angle (t = 5.440, P = 0.000) at the top (t = 6.320, P = 0.000) and middle parts of the implants (t = 22.295, P = 0.000) in the intervention group were lower than those in the control group after treatment. Functional limitations, psychosocial and physical pain and discomfort, and total scores decreased in both groups. The functional limitation (t = 2.379, P = 0.020), psychosocial (t = 2.420, P = 0.000), physical pain and discomfort (t = 6.581, P = 0.000), and total scores (t = 2.140, P = 0.035) were lower in the intervention group than those in the control group. CONCLUSION: Orthodontic treatment combined with 3D printing guide plate implant restoration can significantly improve the masticatory and phonic functions, quality of life, and psychological health of patients with dentition defects. Therefore, it is highly recommended in clinic application.

Analysis of factors related to early failure of 1 001 implants with 3.3 mm narrow-diameter / 口腔疾病防治

Objective@# To explore the early failure of narrow-diameter implants (NDIs) and to provide a reference for clinical implant restoration.@*Methods@# From April 2017 to April 2020, data from a total of 725 patients (with 1 001 NDIs) who accepted implant restoration due to dentition defects were collected from the department of dental implantology in a stomatological hospital; 353 males and 372 females were included. The early failure rate of 1 001 NDIs was retrospectively analyzed. Univariate generalized estimated equation (GEE) and multivariate GEE were used to explore risk factors, including age, sex, implant location, materials, surface modification, length, bone augmentation and healing procedure, associated with early failure of NDIs.@*Results@#There were 34 cases of early failure among 725 patients, including 38 NDIs. The early failure rate of NDIs was 4.69% at the patient level and 3.80% at the implant level. There was no significant difference in the early failure rate of NDIs among different age groups, sexes, implant materials, surface modifications, lengths, and healing procedures (P>0.05). Univariate analysis showed that there was a significant difference between the early failure rate of NDIs in the anterior maxilla group (2.16%) and the anterior mandible group (8.64%) at the implant level (P<0.001). However, there was no significant difference in the early failure rate between the anterior maxilla group and the posterior group (3.35%) (P>0.05). In addition, in the anterior region, the early failure rate of NDIs in the group with simultaneous bone augmentation was significantly lower than that of the group without bone augmentation (P<0.05). However, multivariate GEE analysis showed that the early failure rate of NDIs was only significantly positively correlated with implants in the mandibular anterior region (P<0.01). @*Conclusion @#The overall early survival rate of Straumann 3.3 mm NDIs is greater than 95%. The early failure of NDIs in the anterior mandible region is much higher than that in the anterior maxilla region and posterior region.

The effect of denture restoration and dental implant restoration in the treatment of dentition defect: a systematic review and meta-analysis.

BACKGROUND: Dentition defect is a common symptom in clinical dental patients. This study compared the clinical effects of denture restoration and dental implant restoration in the treatment of dentition defects through meta-analysis. METHODS: Data retrieval was conducted through the PubMed, Web of Science, Embase, CNKI, and Wanfang databases. A total of 479 related literatures published in English or Chinese from 2013 to 2020 were included. Literature screening, data extraction and comprehensive evaluation, and analysis by meta-analysis was performed by 3 authors. RESULTS: A total of 17 studies and 1,459 patients were included. Among the 17 studies, the effective rate of treatment between the two groups was compared and the experimental group rate was significantly higher than that of the control group [odds ratio (OR) =6.149, 95% confidence interval (CI): 4.103-9.215, P<0.001]; the mastication function score was compared, and was higher in the experimental group than in the control group [standardized mean difference (SMD) =1.632, 95% CI: 1.039-2.224, P<0.001]; the retention function score was compared, and was higher in the experimental group than in the control group (SMD =1.775, 95% CI: 1.095-2.455), P<0.001); the aesthetics score was also compared, and was higher in the experimental group than in the control group (SMD =1.300, 95% CI: 0.499-2.100, P=0.001). Among 17 studies, 15 compared the comfort score, which was higher in the experimental group than in the control group (SMD =1.357, 95% CI: 0.455-2.258, P=0.003). CONCLUSIONS: Compared with denture restoration, dental implant restoration is more effective in the treatment of dentition defect with a higher comprehensive score of functional restoration.

Research progress on the relationship between occlusal overload and peri-implantitis / 口腔疾病防治

@#Implant dentures have become the main method for the treatment of dentition defects or complete edentulism. However, due to the lack of periodontal ligament and periodontal ligament proprioceptors, implant dentures have very limited cushioning and sensing capabilities and are prone to occlusal overload. As a risk factor for peri-implantitis, occlusal overload seriously threatens the stability and success rate of implant dentures. This paper reviews the occlusal overload of implant dentures, the causal relationship between occlusal overload and plaque biofilms in peri-implantitis, the mechanism by which occlusal overload promotes peri-implantitis, and the effect of reasonable clinical occlusal adjustment on healing. This review shows that occlusal overload is closely related to the occurrence of peri-implantitis. Occlusal overload can promote the process of peri-implantitis by increasing the release of inflammatory factors and mechanical transduction mechanisms. The intervention of the patients’ bad bite habits and occlusal adjustment can promote the healing of peri-implantitis. At present, there is no uniform standard ideal experimental model for occlusal overload. The phenomenon and mechanism of bone resorption around the implant caused by overload force still need further observation and research, which will help determine the intensity, direction and timing of occlusal loading to guide clinical occlusal adjustment.

Differences in implant osseointegration in the jaw and femur in animal experiments / 口腔疾病防治

@#The jaw and femur are commonly used sites in basic research for modeling bone defects or inserting implants. An increasing number of studies have identified that the jaw and femur indeed show great differences in embryonic development and growth, histomorphology and bone metabolism. A literature review showed that, compared with the femur, the main osteogenic pathway of the jaw may have better osteogenic ability, and its stem cells have better proliferation and osteogenic differentiation ability. However, the jaw structure is less regular, the osteogenic differentiation ability of its osteoblasts is mineralization slightly weak, and the immune cells of the jaw are more sensitive to cytokines. These may be the reasons why the osseointegration of the jaw implant is different from that of the femur in animal experiments, but its specific mechanism has not been clarified.

Clinical application and complications of short implants (≤6 mm) / 口腔疾病防治

@#Short implants can be used as an alternative in cases of insufficient vertical bone volume after dentition defect or absence of dentition to simplify or avoid bone augmentation procedures. Short implants (≤ 6 mm) are reported to have a mean survival rate of 96% after a period of 1-5 years in function and have been widely used in cases of dentition defects or absence of dentition. Compared with conventional implants (≥ 10 mm) combined with bone augmentation procedures, short implants have fewer surgery-related complications, less marginal bone loss, shortened treatment times and reduced costs, and are preferred by patients. Due to a lack of evidence, a high crown-implant ratio should not be an obstacle for the use of short implants. In addition, most of the current literature has not enough follow-up time, the long-term implant survival data of short implants remain unclear. To improve the clinical outcomes of short implants, attention should be paid to the implant site, bone quality, and occlusal force as well as to the presence of oral health maintenance, periodontal diseases and habits through a careful intraoral and radiographic examination. The choices of wider implant use and splint restoration are recommended, occlusal force should be paid attention during implant maintenance. Inappropriate stress on restorations should be avoided. Future studies should be focused on the long-term clinical outcomes of short implants.

Clinical application and new progress of dynamic navigation system in the field of oral implantology / 口腔疾病防治

@#Currently, computer-aided implant surgeries include implant placement surgery under the guidance of a dynamic navigation system. With the use of software inherent in the navigation system, doctors can make a preoperative plan including the ideal position of the implant. Then the plan can be accurately transferred to the surgery, during which the real-time condition of the drill and its relationship with the surgical region will be visualized by the surgeon and the drill can be adjusted in a timely manner. Currently the dynamic navigation system is increasingly widely utilized, especially in cases of esthetic zones or surgical sites with important anatomical structures. However, the clinical workflow of the navigation system is complicated, including CBCT taken after the registration device placement, prosthetic-driven 3D design, calibration, registration, navigated borehole preparation and implant placement surgery. Many details should be considered when the device is applied, including implant position design, fixation of the tracking device, registration, and stable borehole preparation under the guidance of dynamic navigation. Therefore, this article introduces the dynamic navigation system into the clinical workflow and evaluates, the effects of the application and the clinical features. The new progress of the navigation system in the field of implantology is demonstrated at the same time, including navigated surgery in fully edentulous arches and in the zygomatic zone. Further improvements in the navigation system in terms of the accuracy and simplification of the workflow are needed in the future.

Dental implant progress in children and adolescents / 口腔疾病防治

@#With the rapid development of implant technology, implant restoration is a conventional treatment option for adult patients with tooth loss. Severe dental lesions, trauma, tumors, abnormal development and other reasons can cause dental defects and even dentition loss in children and adolescents. There has been hesitation to perform implant therapy for growing children because of the growth period; thus, little is known about the outcomes of the osseointegration procedure in young patients. Therefore, this article reviews the current literature to discuss the use of dental implants in children and adolescents. According to current studies, orthodontic treatment or transitional restoration should be undertaken based on the characteristics of the children and adolescents. Implant surgery should be performed after the end of the peak growth period. For patients with severe dentition defects, relevant criteria should be established before implant surgery to evaluate the effect of implant therapy in children and adolescents. The patients should be treated with a multidisciplinary, staged and long-term treatment approach. Most of the recent literature consists of case reports and short-term studies. There is an urgent need for more studies in this field with long-term follow-up.

Clinical application of laser selective melting titanium alloy for removable partial denture frameworks / 口腔疾病防治

Objective@#To investigate the effect of denture stomatitis of selective laser melting (SLM) titanium alloy for removable partial denture frameworks.@*Methods @#Twenty patients with dentition defects in our hospital were divided into two groups according to the different methods of creating a removable partial denture framework: the SLM group and casting group. The success rate, placement rate, masticatory efficiency and incidence of denture stomatitis were compared. Experimental data were analyzed with SPSS20.0.@*Results @# The success rate of the SLM framework group was 100.00%, which was higher than that of the casting group (90.00%) (P ＜ 0.01). The rate of framework placement in the SLM group was slightly lower than that in the casting group (P ＜ 0.05). The masticatory efficiency of the SLM group was higher than that of the casting group (0.783 ± 0.030 vs. 0.699 ± 0.037, P ＜ 0.001). The incidence of denture stomatitis (10.00%) in the SLM group was significantly lower than that in the casting group (30.00%) (P ＜ 0.001). @*Conclusion @#SLM is superior to the traditional casting method in mastication efficiency and reducing the incidence of denture stomatitis. This method can meet the clinical requirements, but the accuracy of the long-term stent needs to be improved.

[Correlation of TMJ structures and craniocervical area position in partial dental loss]. / Osobennosti vzaimootnosheniia polozheniia strukturnykh élementov visochno-nizhnecheliustnogo sustava i kraniotservikal'noi oblasti pri defektakh zubnykh riadov.

The purpose of the study was to determine the correlation features in position of the TMJ and the atlantoaxial compound in presence of dentition defects. The study included 20 patients (10 males and 10 females) aged 37 to 59 years with mandible terminal dentition defects. The comparison group included 20 patients of men and women equally, aged from 18 to 29 years with intact dentition. All patients were diagnosed with CT scan of the maxillofacial area, including the craniovertebral zone. In the analysis of the TMJ, the ratio of bone structures were determined by studying the CT scan in sagittal plane. The position of the elements of the atlantoaxial compound were evaluated on CT scan in frontal and transversal plane along the distance from the lateral masses of the CI vertebrae to the dens CII process. In persons with one-sided terminal dentition defect any changes of the position of the TMJ elements were not determined except for the right L1 parameter (8.91±0.45 mm and 6.8±0.77 mm, respectively, p=0.020). At the same time, the L1 distance on the left significantly changed to 6.86±0.40 mm relative to the comparison group (8.21±0.77 mm, p=0.030). In contrast to the ratio of the bony structures of the TMJ on the analysis of the craniocervical zone we determined the differences in the relationships of all elements of the atlantoaxial compound. The asymmetry index of CI-CII in the study group was 1.12±0.15 mm, in the comparison group 0.1±0.02 mm, p=0.001. The correlation analysis of the investigated structures showed different variants of the relation (direct and inverse) between the L1, L5 parameters of the TMJ and the distance from the lateral masses CI to dens CII. The structures of the TMJ in the presence of dentition defects remain practically unchanged and are more stable, it can be assumed that the primary link which undergo the changes considering the relationship between bone structures is the atlantoaxial junction.

Comparison of the effect of oral cavity repair and implant repair in the treatment of dentition defect / 中国基层医药

Objective To compare the therapeutic effect of conventional dental prosthesis and implant repair in the treatment of dentition defect.Methods From March 2016 to December 2017,110 patients with dental defects in the First People＇s Hospital of Yongkang were selected and divided into control group and observation group according to different treatment methods,with 55 cases in each group.The control group received oral routine repair,and the observation group was treated with implant repair.The therapeutic effect of the two groups was analyzed.Results The total effective rate of the observation group was 96.36%,which was significantly higher than 81.82% of the control group (χ2＝3.168,P＜0.05).After treatment,the scores of fixation function,chewing function,language function,degree of comfort,degree of aesthetics in the observation group were (18.06 ±1.32)points,(17.97 ±1.12) points,(18.41 ±1.06) points,(18.24 ±1.03) points and (18.37 ±1.21) points,respectively,which in the control group were (12.51 ±2.43) points,(13.19 ±2.55) points,(13.76 ±2.46) points,(11.64 ±2.12) points,(13.16 ± 2.45)points,respectively,the differences between the two groups were statistically significant (t＝8.957,11.235,10.369,11.036,13.554,all P＜0.05).After treatment for 1 week,the denture plaque index,gingival index and gingival bleeding index in the observation group were (0.81 ±0.11) points,(0.92 ±0.14 ) points,(1.33 ± 0.17) points,respectively,which in the control group were (1.58 ±0.49) points,(1.65 ±0.58) points and (2.67 ±0.62) points,respectively,and the differences between the two groups were statistically significant ( t ＝14.512,10.647,11.354,all P＜0.05).Conclusion The effect of implant repair in the treatment of dentition defect better than conventional dental prosthesis,which can improve the repair effect of patients and maintain the healthy periodontal health,it is worthy of clinical application.

The short-term efficacy of implant in the treatment of patients with dentition defect caused by chronic periodontitis / 口腔疾病防治

Objective @#To investigate the short-term efficacy of implant in the treatment of patients with dentition defect caused by chronic periodontitis. @*Methods @#53 patients with mild to moderate chronic periodontitis treated in our hospital from June 2014 to May 2015 were selected as observation group, and 53 patients without periodontal diseases in the same period were selected as control group. The plaque index (PLI), sulcus bleeding index (SBI), periodontal probing depth (PD) and gingival papilla index (PIS) were measured at six months and one year after operation, respectively. Interleukin-6 (IL-6), interleukin-8 (IL-8), high sensitive C-reactive protein (hs-CRP) and tumor necrosis factor-α (TNF-α) were detected at six months and one year after operation, respectively. At the last follow-up, the survival rate of two groups were calculated.@*Results @#One year after operation, 5 of the 64 implants in the observation group failed compared with 2 of the 71 implants in the control group. There was no statistical difference in the implant survival rate between the two groups (92.19% vs 97.18%, P=0.191). There was no significant difference in SBI (t=0.936, P=0.351)、 PLI (t=0.457, P=0.649)、PIS (t=1.132, P=0.217)、PD (t=0.957, P=0.341) between the two groups at six months after operation. One year after operation, the periodontal index of the observation group was higher than that of the control group SBI (t=5.297, P=0.000)、 PLI (t=2.341, P=0.021)、 PIS (t=8.218, P=0.000) and PD (t=6.492, P=0.000). The levels of IL-6 (t=6.463, P=0.000)、 IL-8 (t=7.202, P=0.000)、 hs-CRP (t=4.237, P=0.000) and TNF-α (t=6.194, P=0.000) in the observation group were higher than those in the control group at six months after operation. One year after operation, the level of inflammatory factors in the observation group was higher than that in the control group IL-6 (t=12.835, P=0.000)、 IL-8 (t=13.207, P=0.000)、 hs-CRP (t=11.319, P=0.000) and TNF-α (t=8.117, P=0.000). @*Conclusion @# Implant as the treatment of patients with dentition defect caused by chronic periodontitis obtained satisfied short-term effect, but its long-term efficacy remains to be further verified.

Immediate repair of All-on-4 implants: a clinical retrospective study / 口腔疾病防治

Objective@#To analyze implant survival rate and incidence rate of complications after All-on-4 implantation, and to discuss the technical points and consideration of All-on-4.@*Methods @#According to the criteria of inclusion and exclusion, 23 cases treated with All-on-4 immediate restoration were referred, from January 2007 to December 2015, including 5 cases of edentulous maxillary, 14 cases of edentulous mandibular and 4 cases of both maxillary and mandibular were edentulous. All the patients received immediate function with provisional prostheses at the surgery day. Definitive prostheses were delivered to patients after 3-6 months post operation and follow-up visits were performed up to 9 years (average 3 years) after placement of definitive prostheses.@*Results @# In this study, the rate of implant retention of 108 implants and 27 final restorations was 100% until the last review. Among the 23 patients, 3 patients had complications and the incidence of complications was 13.0%. @*Conclusion@# All-on-4 is an effective and reliable method in the treatment of dentures denture. The incidence of complications is low. All-on-4 is a practical method.

[Clinical application on restoration of dentition defects using tooth-alveolar bone grafts].

OBJECTIVE: To evaluate the clinical effectiveness of tooth-alveolar bone grafts in repairing dentition defects. METHODS: Forty-five patients with dentition defect were divided into two groups according to different operation methods. In group A (n=24), the tooth-alveolar bone grafts of the transplanted tooth and its surrounding alveolar bone were cut using modified surgical orthodontics and then embedded into the designated planting hole. In group B (n=21), the teeth were extracted through conventional tooth transplantation and then embedded into the prepared planting holes. The transplanted teeth were fixed for about 4-6 weeks using the orthodontic method. During the postoperation, which lasted for 2-12 weeks, root canal treatments were administered selectively. The medical effect was regularly followed up and evaluated. RESULTS: No significant difference was found in the change of color and the periodontal ligament image between the two groups (P>0.05) whereas significant differences were observed in the degree of tooth mobility, the absorption of root and alveolar bone, and the rate of root canal treatment (P<0.05). The curative effect in group A was superior to group B. CONCLUSIONS: Tooth-alveolar bone graft transplantation has overcome some of the limitations of traditional tooth transplantation. Therefore, it is an effective means of repairing dentition defect.