Clinical performance of implant-assisted removable partial dentures using implant surveyed crowns: a systematic review and meta-analysis.

PURPOSE: This study aimed to evaluate the clinical performance of implant-assisted removable partial dentures (IARPD) with surveyed crowns, also known as implant-crown-retained removable partial dentures (ICRPDs). MATERIALS AND METHODS: Electronic searches of MEDLINE/PubMed, the Cochrane Central Register of Controlled Trials, the Web of Science, and the Korea Citation Index were performed according to the established search terms for ICRPD. A literature search was conducted for studies published in English or Korean until September 2023, using the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines. RESULTS: A total of 216 journals were searched, and 31 eligible studies were selected based on the inclusion and exclusion criteria. One systematic review included five case reports of ICRPD. Nine retrospective studies evaluated implant survival/success rate, implant failure cases, marginal bone loss, periodontal status, clinical complications, and patient satisfaction. Twenty-one case reports published in Korea showed good prognoses. CONCLUSION: According to the findings of this systematic review, ICRPD has a reasonable survival/success rate, minimal bone loss, and high patient satisfaction.

An Innovative Approach for Management of Unfavorable Bilateral Mandibular Lingual Undercuts With Collapsible Type Complete Denture: A Case Report.

Advanced and uneven residual ridge resorption in mandibular edentulous arches leads to non-retentive and unstable dentures. The hardness of traditional heat-cured acrylic resin makes extending the denture base into bilateral lingual undercuts challenging. This can cause supporting tissue damage, pain, and ulcerations during denture insertion and removal. Although clinical challenges related to limited mouth opening were addressed by modifying the impression technique, incorporating hinges, swing lock attachments, and stainless-steel posts to form collapsible denture bases, there are no documented case reports with proper follow-up regarding the use of such type dentures in cases of mandibular lingual undercuts. A 68-year-old male patient reported, with the chief complaint of missing teeth in the upper and lower jaws for five years and wanting replacement. The intraoral clinical examination yielded findings of a severely compromised mandibular ridge (ACP Class IV) and a moderately compromised maxillary ridge (ACP Class II). In the maxillary arch, the presence of anterior labial undercut, and bilateral undercuts lateral to tuberosity were evident. The patient reported pain on palpation bilaterally in the tuberosity region. Prolonged mandibular edentulism and uneven bone resorption resulted in unfavorable bilateral lingual undercuts, with class III (M.M. House) border tissue attachment in the labial and buccal aspects of the basal tissue area. After enumerating the treatment options, the patient opted for a removable prosthesis for the maxillary and mandibular arch. Pre-prosthetic surgery was done to eliminate tuberosity undercuts. Since the patient was unwilling to take up pre-prosthetic surgical corrections for the mandibular lingual undercuts, a significant challenge emerged: creating a retentive mandibular complete denture without compromising the peripheral seal and retention. A conventional complete denture was fabricated after blocking the unfavorable undercut and reducing the height of the flange. On the recall appointment, the patient complained of reduced retention and food lodgment in the intaglio surface of the denture and pain due to denture movement on mastication. In this case report, stainless steel hinges have been added to the lingual flange of the mandibular complete denture to make it collapsible. The resultant denture facilitated reduced tissue trauma and discomfort during denture removal and insertion and had satisfactory retention and stability compared to the former denture. These collapsible type dentures can be used as an alternative to flexible dentures, wherein patients can't afford surgeries or flexible dentures.

Dental prosthesis plaque index of Augsburger and Elahi: Expansion and standardisation in community-dwelling frail older people.

BACKGROUND: Inadequate daily oral hygiene care of dental prostheses could worsen general health of frail older people. The index of Augsburger and Elahi is often recommended to assess maxillary dental prosthesis plaque (DPP). OBJECTIVE: To assess the reliability of an expanded and standardised DPP index of Augsburger and Elahi in trained and untrained examiners, and to determine the applicability of the index in community-dwelling frail older people. METHODS: Ten community-dwelling frail older persons with complete and partial removable dental prostheses (RDPs) (mean ± SD age = 87.9 ± 8.4 years) participated. Seven persons were revisited after 3 months. The index was expanded with mandibular RDPs. Standardisation was achieved with a specially designed reference sheet. The RDPs were photographed after plaque colouring. Two trained examiners scored the photographs; thereafter, two untrained examiners. One trained examiner scored the photographs again after 3 weeks. Changes in DPP over the 3-month period were assessed with Wilcoxon signed-rank test. Inter- and intra-examiner reliability was assessed with intraclass correlation coefficients (ICCs). RESULTS: The DPP scores did not change significantly over time (Z = -0.594, p = 0.553). Inter-examiner reliability was excellent in the trained examiners (ICC = 0.859-0.947), and fair-to-good in the untrained examiners (ICC = 0.671-0.703). Intra-examiner reliability was excellent (ICC = 0.941-0.962). CONCLUSION: The proposed expansion and standardisation of the DPP index has an excellent inter- and intra-examiner reliability when performed by trained examiners, and a fair-to-good inter-examiner reliability by untrained examiners. Therefore, the index could be recommended for application in dental prostheses-wearing older persons and could be useful for awareness and education of professional and informal caregivers and the older persons themselves. TRAIL REGISTRATION: The Netherlands Trail Register NTR6159.

Influence of denture-bearing conditions on masticatory function and patient-reported outcomes measures.

PURPOSE: To investigate the influence of different denture-bearing conditions on the masticatory function and patient-reported outcome measures (PROMs) of complete denture wearers. METHODS: Sixty edentulous patients were selected and allocated into two groups according to the American College of Prosthodontics' (ACP) classification: non-atrophic (NAT) (Classes I and II) (n = 24) and atrophic (AT) (Classes III and IV) (n = 36). All patients received new complete dentures (CDs). The objective variables (masticatory performance and swallowing threshold) were assessed as well as the PROMs (oral health-related quality of life (OHIP-EDENT), patient satisfaction) and quality of the prosthesis, at baseline (using the old CD) and after 4 months new prostheses use. Data were analyzed by Mann-Whitney test followed by the Generalized Equations Estimation (GEE), linear regression and Chi-square test. RESULTS: Higher masticatory performance was observed in the NAT group (p < .05) for both time points, baseline and after 4 months. However, compared to baseline, both groups showed significant masticatory improvement after 4 months (p < .05). Satisfaction and overall quality of life improved after 4 months with no difference between groups (p > .05). Regarding the quality of the CD, baseline results were significantly (p < .05) lower in the AT group, but after 4 months, no significant differences were found between groups and in intragroup analysis (p > .05). CONCLUSIONS: The denture-bearing conditions seems to impact masticatory function, but the PROMs are barely affected.

Improving accuracy and efficiency of the machined PEEK denture based on NSGA-II integrated GABP neural network.

OBJECTIVES: The polymer polyetheretherketone (PEEK) is gradually being used in dental restorations because of its excellent mechanical properties, chemical resistance, fatigue resistance, thermal stability, radiation translucency and good biocompatibility. To process PEEK dentures with lower surface roughness as quickly as possible, the non-dominated sorting genetic algorithm-II (NSGA-II) integrated genetic algorithm back propagation (GABP) neural network was proposed, which can adjust the combination of process parameters for milling PEEK dentures. METHODS: The PEEK machining was conducted using a four-axis dental milling machine at different process parameters. The surface roughness of PEEK dentures was characterized using surface roughness profiler and scanning electron microscopy (SEM). The optimum machining performance of milling PEEK dentures was investigated using a multi-objective optimization model named as NSGA-II integrated GABP neural network algorithm. The surface roughness (Ra) and material removal rate (MRR) were used as optimization objectives. RESULTS: The multi-objective optimization model effectively improved surface roughness and machining efficiency for milling PEEK dentures. The validation experiments showed that the surface roughness of all PEEK dentures was less than 0.2µm, which was within the range of surface roughness set in this paper. The GABP surface roughness prediction model had an average error of 6 %. For the same surface roughness value, the optimized milling parameters all had a greater material removal rate. SIGNIFICANCE: The research results can improve current PEEK denture CAD/CAM technology by providing appropriate milling parameters using NSGA-II integrated GABP algorithm.

Effect of thermocycling on tensile bond strength of autopolymerized, heat-polymerized, milled, and 3D printed denture base materials bonded to 4 different denture liners: an in vitro study.

BACKGROUND: Digitally fabricated dentures may require relining due to continual alveolar ridge resorption. However, studies evaluating the tensile bond strength (TBS) of digitally fabricated dentures bonded to denture liners are lacking. This study aimed to evaluate the TBS of autopolymerized, heat-polymerized, milled, and 3D printed denture base materials bonded to 2 acrylic-based and 2 silicone-based denture liners, both before and after thermocycling. Additionally, the impact of thermocycling on the TBS were also evaluated. METHODS: The TBS of 4 different denture base materials (Palapress (PL), Vertex Rapid Simplified (VR), Smile CAM total prosthesis (SC), and NextDent denture 3D+ (ND)) bonded to 2 acrylic-based (GC Soft-Liner (GC) and Tokuyama Rebase II (RB)) and 2 silicone-based (Ufi Gel P (UP) and Sofreliner Tough M (ST)) denture liners were tested. Specimens (n = 8) were divided into non-thermocycling and thermocycling groups. Non-thermocycling specimens were tested after 24-hours water immersion, while thermocycling specimens were underwent 5000 cycle and were immediately tested. Mode of failure was examined under a stereomicroscope. Data were analyzed using 2-way ANOVA and Tukey HSD tests (α = 0.05), and independent samples t test (α = 0.05) for TBS between non-thermocycling and thermocycling groups. RESULTS: For the non-thermocycling groups, within the same denture liner material, no significant differences were found between denture base materials, except the ND + RB group, which had significantly lower TBS. For the thermocycling groups, within the same denture liner material, the TBS in the PL group exhibited the highest and the ND group exhibited the lowest. Within the same denture base material, in both non-thermocycling and thermocycling groups, the TBS in the ST group exhibited the highest; in contrast, that in the GC group exhibited the lowest. No significant differences were observed in TBS between non-thermocycling and thermocycling groups, except for denture base materials bonded to the ST group, SC + UP, and ND + UP groups. CONCLUSIONS: Milled denture base can be relined with acrylic-based or silicone-based denture liner. However, cautions should be exercised when relining 3D printed denture base. Thermocycling did not affect TBS between acrylic-based denture liners and denture bases. In contrast, it affected the bond between silicone-based denture liner and denture base.

Comparative Assessment of the Adhesion Forces of Soft Silicone Materials to the Denture Base Material (PMMA) Conditioned with Sandblasting.

BACKGROUND: In patients undergoing surgery for oral cancer, soft support materials are used to minimise trauma to the soft tissues. Silicone-based liners are widely used in prosthetic dentistry. A prerequisite for long-term Adhesion of the liner to the denture base is largely dependent on the surface preparation of the denture material. OBJECTIVES: The aim of the present study was to investigate whether surface preparation of the acrylic material by sandblasting increases the adhesion of the silicone support material to the acrylic denture plate. MATERIAL AND METHODS: The study included adhesion testing of four silicone-based soft cushioning materials (Silagum Comfort, Elite Soft Re-lining, Ufi Gel SC, Mucopren Soft) on a total of 270 samples. Each material was tested on 15 samples. Three subgroups with different surfaces were separated: 1 raw-standard surface treatment with a cutter, and 2 sandblasted, with 100 and 350 µm alumina grain at 90°. The samples were subjected to seasoning: 24 h and six weeks. The adhesion force of silicone to acrylic was measured by performing a tensile test using a universal two-column testing machine. RESULTS: The highest bond strength was recorded for Silagum on the surface prepared using 100 µm abrasive and seasoned for 6 weeks (291.5 N). The smallest among the maximum forces was recorded for the Mucopren material (81.1 N). For the Mucopren system with a raw and sand-blasted surface (350 µm), the adhesion strength increased after six weeks. In contrast, the durability of the joint decreased for the 100 µm sandblasted surface. The Elite material exhibited similar values for maximum forces (271.8 N) and minimum forces (21.1 N). The highest strength (226.1 N) was recorded for the sample from the group prepared with 350 µm abrasive and seasoned for 24 h. The lowest value (72.6 N) occurred for the sample from the group with 100 µm abrasive and seasoned for 6 weeks. CONCLUSIONS: Sandblasting of acrylic plastic improves adhesion to selected relining silicones. 2. The size of the abrasive employed has an impact on the adhesion between the acrylic plastic and the bedding silicone. 3. In the case of some relining systems (Mucopren), an increase in roughness through sandblasting has the effect of reducing the durability of the bonded joint.

Self-Reported Oral Diseases and Their Association with the Frailty index among Older Japanese People: Four-Year Follow-Up.

BACKGROUND: Oral health is a relevant component for overall health. Oral disease onset at an early age and may harm several health dimensions, especially among older people, and has been associated with frailty. OBJECTIVE: To evaluate associations between the Frailty Index (FI) and self-reported oral diseases among older, community-dwelling Japanese people. DESIGN: Cross-sectional and prospective analyses were performed. SETTING AND PARTICIPANTS: We analyzed data from 2,529 participants at the baseline and four-year follow-up of the Nihon University Japanese Longitudinal Study of Aging, which had a four-year follow-up. MEASUREMENTS: We used the self-reported number of teeth, self-reported satisfaction with dentures, and self-reported ability to chew hard food as independent variables. We computed an FI that included 40 deficits as the dependent variable. The FI score ranged from 0 to 1, with a higher score associated with adverse health outcomes and mortality. Considering a gamma distribution and controlling for age, gender, marital status, education, working status, and residence area, we fitted generalized linear models. RESULTS: We found that dissatisfied denture users had a 2.1% (95% CI 1.006-3.279) higher frailty score than non-denture users at the baseline and a 2.1% (95% CI 0.629-3.690) higher frailty score than non-denture users at the four-year follow-up. In the cross-sectional analysis, with each additional reported tooth at the baseline, the FI score was lower by 1.5% (95% CI -2.878 to -0.208) at the four-year follow-up. In both the cross-sectional and the prospective analyses, the FI scores increased as the ability to chew hard food decreased. CONCLUSIONS: Self-reported oral diseases are associated with the FI score cross-sectionally and prospectively. Identifying factors prospectively associated with frailty may improve strategies for the next generation of older people. Considering oral diseases may help clinicians personalize treatment plans for older people.

Effect of treatment with implant-supported fixed partial dentures on oral health-related quality of life in patients with unilateral shortened dental arch.

Background/purpose: Implant-supported fixed partial dentures (IFPDs) are a treatment option for partially edentulous dentition with missing posterior-most molars despite the concept of a shortened dental arch (SDA). This study aimed to evaluate the effect of IFPD treatment on oral health-related quality of life (OHRQoL) in patients with unilateral SDA missing two adjacent molars and to compare the effects of single- and two-unit IFPDs. Materials and methods: Forty patients with unilateral SDA missing two adjacent molars (Kennedy Class II) participated in this study; 11 patients received one implant placement in the first molar and were treated with a single-unit IFPD (single-unit group), and 29 received two implant placements and were treated with a two-unit IFPD (two-unit group). The Oral Health Impact Profile (OHIP) questionnaire for OHRQoL assessment and the gummy jelly test for objective masticatory performance were administered before and after IFPD treatment. The Wilcoxon signed-rank test for all patients and Mann-Whitney U test were performed for pre- and post-treatment comparisons and between-group comparisons, respectively. Results: The OHIP summary score and gummy jelly glucose concentration in all patients showed significant improvements after treatment (all P < 0.05). No significant differences were observed between the single- and two-unit groups for any of the items. Using the minimal important difference in the OHIP summary score, 63.6 % and 58.6 % of patients in the single- and two-unit groups, respectively, showed improvement by 6 points or more. Conclusion: IFPD treatment for patients with SDA missing two adjacent molars may provide clinically meaningful improvements in OHRQoL.

Association between the treatment choice of implant-supported fixed partial dentures and oral health-related quality of life in patients with a shortened dental arch: A preliminary observational study.

Background/purpose: In cases of missing posterior teeth, treatment modalities based on the shortened dental arch (SDA) concept may be a viable alternative. However, the association between oral health-related quality of life (OHRQoL) and patients' treatment decisions remains unclear. This study aimed to investigate the association between OHRQoL and the decision to be treated with implant-supported fixed partial dentures (IFPDs) or take a wait-and-see approach in patients with an SDA missing a single second molar and to clarify the impact of IFPD treatment on the OHRQoL. Materials and methods: The Oral Health Impact Profile (OHIP) questionnaire was administered twice (pre- and post-treatment) and once to 41 patients with a unilateral SDA missing a single second molar who chose IFPD treatment (IFPD group, n = 22) and the wait-and-see approach (no treatment group, n = 19), respectively. Logistic regression analysis was performed with IFPD treatment choice as the objective variable and the four OHIP dimension scores, age, and sex as covariates. The pre- and post-treatment values of the OHIP summary and four-dimension scores were compared using a paired t-test. Results: The IFPD treatment choice was significantly associated with sex (male), higher Oral Function dimension scores, and lower Psychosocial Impact dimension scores (all P < 0.05). The OHIP summary and four-dimension scores were significantly lower following IFPD treatment (all P < 0.05). Conclusion: IFPD treatment for a single missing second molar may be clinically beneficial for improving the OHRQoL of patients with an SDA who experience a decline in masticatory function.

Full-Arch Rehabilitation With Mucosa-Supported Prostheses Utilizing a Digital Workflow: A Case Report.

The advent of digital workflows has revolutionized oral rehabilitation, offering excellent prosthesis and restoration adaptation while reducing work time. This case report aims to describe a full-arch rehabilitation protocol using mucosa-supported prostheses through a digital workflow. The technique begins with scanning the upper jaw and taking an impression of the lower jaw, followed by scanning to create a digital cast. Next, border molding and the final impression of both arches are performed using a closed-mouth technique, during which the patient is guided to perform lateral and protrusive movements. Subsequently, intraoral scanning of the occlusion and both impressions is conducted, leading to the design of the final dentures with the established occlusion. Finally, the dentures are printed in Formlabs resin specifically designed for dentures. The digital workflow facilitates the manufacturing of mucosa-supported full-arch prostheses effectively. This method allows for the adjustment of the vertical dimension of occlusion, ensures excellent adaptation of the prosthesis to the soft tissues, and provides aesthetic satisfaction for the patient. Additionally, it reduces the number of sessions required to install the definitive prosthesis.

Longevity of acrylic and cobalt-chromium removable partial dentures-A ten-year retrospective survival analysis of 1246 denture-wearing patients.

OBJECTIVES: to assess the survival rates of removable partial dentures (RPDs) and identify factors impacting their longevity. METHODS: electronic health records were retrieved of patients aged ≥18 who received RPDs between 2010 - 2021 with a follow-up of ≥ three months. Data extracted included demographics, medical history, dental charting, periodontal screening and recording scores, prostheses details and related interventions, including new dentures/denture remakes, and maintenance. Multivariate Mixed-Effect Cox regression was performed to identify potential RPD survival risk factors. Reduced model selection was reached using a backward step-down by comparing the performance of these multivariable models using the ANOVA test. RESULTS: 1893 RPDs from 1246 patients were included, with a median follow-up of 21.8 months (range from 3 to 131.3 months). Three hundred and twelve patients received a maxillary RPD, 460 received a mandibular RPD, and the remaining 474 patients received both maxillary and mandibular RPDs. Metal-based RPDs had a median survival of 73 months (95%CI: 70 - 82) versus 45 months (95% CI: 37-67) for acrylic ones. Multivariable mixed effects Cox model showed that the lifespans of RPDs were longer amongst patients receiving more maintenance care within three months [Hazards Ratio (HR)=0.89 (0.83, 0.96)] and after three months [HR=0.53 (0.46, 0.61)] of denture delivery, patients wearing both maxillary and mandibular RPDs [HR=0.67 (0.52, 0.87)], and patients receiving metal-based RPDs [HR=0.31 (0.23, 0.42)]. CONCLUSIONS: Metal-based dentures, dual arch restoration, and increased maintenance positively impact the survival of RPDs. CLINICAL SIGNIFICANCE: Adapting consent and warranty practices is advised to reflect RPD performance variations.

Application of digital impression and model in removable partial dentures for Kennedy classâ andâ ¡dentition defects.

OBJECTIVES: This study aimed to evaluate the application of digital impression and resin model technology in removable partial dentures (RPD) for Kennedy classⅠandⅡdentition defects. METHODS: Patients with Kennedy classⅠorⅡdental defect were selected and grouped in accordance with the following denture production processes: digital impression/resin model/cast cobalt-chromium alloy framework group (group A), digital impression/resin model/laser printed titanium framework group (group B), alginate impression/plaster model/cast cobalt-chromium alloy framework group (group C), and alginate impression/plaster model/laser printed titanium framework group (group D), with 40 cases in each group. The final RPD was examined in place in the mouth, and the evaluation indicators included the retention force of clamp ring, the tightness of connector and base, and the accuracy of occlusion. The evaluation scores of each index were used for analysis on the Kruskal-Wallis rank-sum test. RESULTS: No statistically significant difference in the score of each index was found among the four groups in RPD. CONCLUSIONS: The cast cobalt-chromium alloy and laser-printed titanium framework RPD using digital impression and resin model can meet the clinical restoration requirements of patients with Kennedy classⅠandⅡdentition defects.

A swallowed denture leading to misdiagnosis with esophageal neoplasm: a case report.

Introduction: Foreign body ingestion can lead to esophageal complications, including perforation and impaction, in up to 20% of cases, making it a critical situation. Misdiagnosis or delayed diagnosis can cause severe complications. Case presentation: We present the case of a 78-year-old female who swallowed an acrylic partial denture leading to progressive dysphagia and a vegetative ulcerative lesion on endoscopy. The lesion was initially misdiagnosed as a neoplasm of the esophagus. CT scan and a repeat endoscopy revealed the presence of a denture in the esophagus. The denture was successfully removed with a rigid esophagoscope, and no evidence of complications was reported in follow-up visits. Discussion: Diagnosis of esophageal foreign bodies involves imaging studies and endoscopy, which is the gold standard for diagnosis and management. CT scans also have an important role in diagnosing controversial cases. Treatment depends on the size, shape, and location of the object.

Stereophotometric facial changes in edentulous older adults after rehabilitation with complete dentures.

OBJECTIVES: To evaluate the facial characteristics of edentulous older adults who underwent rehabilitation using complete dentures, and to compare them with dentate individuals. BACKGROUND: Edentulism rehabilitation with complete dentures aims to restore occlusion and facial aesthetics. MATERIALS AND METHODS: The study included 102 edentulous participants needing prosthodontic rehabilitation with complete dentures and 30 with a natural dentition (aged >65). The 3D facial scans were performed using an Artec optical scanner. Superficial facial landmarks were identified, and 16 parameters were calculated. Regional analysis with the superimposition of two scans was used to calculate the average distances and percentage of non-matching surfaces in the 11 regions. Paired and independent t-tests (α = .05) were used to test for group differences, as appropriate. RESULTS: After rehabilitation with complete dentures, facial changes were most noticeable in the perioral region: wider rima oris, longer upper lip, wider upper vermilion, and more protruded profile. The comparison of facial regions without and with dentures showed fuller and curvier cheeks, with no direct influence of dentures. The edentulous faces with dentures appeared shorter and more retruded than those of dentate individuals. A narrower lower vermilion, retruded upper lip, and more flattened facial profile were observed in females with dentures than in their dentate peers. CONCLUSION: Besides the expected positive influence of rehabilitation with complete dentures on facial appearance in the perioral region, there are some unexpected changes, such as fuller cheeks, but there is still deficiency in vertical facial dimensions and a more flattened facial profile.

Knowledge, attitudes, and practice related to tooth loss and dentures among patients with dental arch deficiencies.

BACKGROUND: Tooth loss is a common problem that affects many people worldwide. Exploring knowledge, attitude, and practice (KAP) among patients can identify barriers and challenges in following recommended practices, providing valuable insights for dental healthcare providers, policymakers, and researchers. This study aimed to explore the KAP of patients with dental arch deficiencies regarding tooth loss and dentures. METHODS: This web-based, cross-sectional study was conducted among patients with dental arch deficiencies using a self-designed questionnaire. RESULT: 3166 valid questionnaires were included. Participants' mean KAP scores were 6.84 ± 2.27 (possible range: 0 ~ 12), 39.4 ± 3.72 (possible range: 9 ~ 45), and 27.7 ± 4.36 (possible range: 8 ~ 40), respectively. Multivariable logistic regression analysis showed that knowledge (OR = 1.383), employed (OR = 1.805), family history (OR = 2.158), and treatment (OR = 1.683) were independently associated with attitude. Moreover, knowledge (OR = 1.239), attitude (OR = 1.250), female (OR = 0.619), age (OR = 0.967), college/bachelor (OR = 0.373), and master and above degree (OR = 0.418), employed (OR = 0.554) or student (OR = 0.434), with 10,001-20,000 Yuan household income per month (OR = 0.492), have been married (OR = 0.609), smoking (OR = 0.595), drinking (OR = 0.397), disease duration (OR = 0.972), with family history (OR = 1.676), and with treatment (OR = 3.492) were independently associated with practice (all P < 0.05). CONCLUSION: Patients with dental arch deficiencies have insufficient knowledge, positive attitudes, and moderate practice toward tooth loss and dentures, which might be affected by multiple demographic factors.

Comparison of Conventional and Digital Workflows in the Fabrication of Fixed Prostheses: A Systematic Review.

When considering dental restorations, the use of fixed partial dentures is one of the most widely accepted treatment options. In the past, fabrication was done using traditional techniques and the conventional workflow was by far the popular method; however, nowadays digital workflows are being used as a means to produce the prosthesis. This systematic review aims to compare the workflows by considering their respective qualities, such as precision, efficiency, cost-effectiveness, and clinical performance. A complete search has been carried out to incorporate any relevant studies published between the years 2012 and 2023 in databases such as Scopus, Web of Science, PubMed, ScienceDirect, and Cochrane Library. Two independent reviewers screened articles for inclusion and assessed the studies' methodological quality rating via the NIH Tool. A total of 22 relevant articles were reviewed after a systematic search strategy. The main outcome of the review was digital workflows were found to reduce working time, eliminate the selection of trays, minimize material consumption, and enhance patient comfort and acceptance. The studies also showed that digital workflows resulted in greater patient satisfaction and higher success rates than conventional workflows. Workflows for digital dentistry demonstrated to be better than traditional ones due to the cost-effectiveness, accuracy, and time optimization for the fabrication of fixed prostheses.

Causal effects of denture wearing on epigenetic age acceleration and the mediating pathways: a mendelian randomization study.

BACKGROUND: The epigenetic-age acceleration (EAA) represents the difference between chronological age and epigenetic age, reflecting accelerated biological aging. Observational studies suggested that oral disorders may impact DNA methylation patterns and aging, but their causal relationship remains largely unexplored. This study aimed to investigate potential causal associations between dental traits and EAA, as well as to identify possible mediators. METHODS: Using summary statistics of genome-wide association studies of predominantly European ancestry, we conducted univariable and multivariable Mendelian randomization (MR) to estimate the overall and independent effects of ten dental traits (dentures, bleeding gums, painful gums, loose teeth, toothache, ulcers, periodontitis, number of teeth, and two measures of caries) on four EAA subtypes (GrimAge acceleration [GrimAA], PhenoAge acceleration [PhenoAA], HannumAge acceleration [HannumAA] and intrinsic EAA [IEAA]), and used two-step Mendelian randomization to evaluate twelve potential mediators of the associations. Comprehensive sensitivity analyses were used to verity the robustness, heterogeneity, and pleiotropy. RESULTS: Univariable inverse variance weighted MR analyses revealed a causal effect of dentures on greater GrimAA (ß: 2.47, 95% CI: 0.93-4.01, p = 0.002), PhenoAA (ß: 3.00, 95% CI: 1.15-4.85, p = 0.001), and HannumAA (ß: 1.96, 95% CI: 0.58-3.33, p = 0.005). In multivariable MR, the associations remained significant after adjusting for periodontitis, caries, number of teeth and bleeding gums. Three out of 12 aging risk factors were identified as mediators of the association between dentures and EAA, including body mass index, body fat percentage, and waist circumference. No evidence for reverse causality and pleiotropy were detected (p > 0.05). CONCLUSIONS: Our findings supported the causal effects of genetic liability for denture wearing on epigenetic aging, with partial mediation by obesity. More attention should be paid to the obesity-monitoring and management for slowing EAA among denture wearers.

Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures.

A common challenge encountered with both traditional and digitally produced dentures involves the extraction of artificial teeth from the denture base. This narrative review seeks to present an updated perspective on the adherence of synthetic teeth for denture base materials, employing diverse methods. Dental technicians often employ chemical approaches and mechanical techniques (including abrasion, laser treatment, and abrasive blasting) to augment the retention of denture teeth. However, the efficacy of these treatments remains uncertain. In certain instances, specific combinations of Denture Base Resin (DBR) materials and artificial teeth exhibit improved performance in conventional heat-cured dentures following these treatments. The primary reasons for failure are attributed to material incompatibility and inadequate copolymerization. As new denture fabrication techniques and materials continue to emerge, further research is imperative to identify optimal tooth-DBR combinations. Notably, 3D-printed tooth-DBR combinations have demonstrated reduced bond strength and less favorable failure patterns, while utilizing milled and traditional combinations appears to be a more prudent choice until advancements in additive manufacturing enhance the reliability of 3D-printing methods.

Enhancing 3D-printed denture base resins: A review of material innovations.

The limited physical and mechanical properties of polymethyl methacrylate (PMMA), the current gold standard, necessitates exploring improved denture base materials. While three-dimensional (3D) printing offers accuracy, efficiency, and patient comfort advantages, achieving superior mechanics in 3D-printed denture resins remains challenging despite good biocompatibility and esthetics. This review investigates the potential of innovative materials to address the limitations of 3D-printed denture base materials. Thus, this article is organized to provide a comprehensive overview of recent efforts to enhance 3D-printed denture base materials, highlighting advancements. It critically examines the impact of incorporating various nanoparticles (zirconia, titania, etc.) on these materials' physical and mechanical properties. Additionally, it delves into recent strategies for nanofiller surface treatment and biocompatibility evaluation and explores potential future directions for polymeric composites in denture applications. The review finds that adding nanoparticles significantly improves performance compared to unmodified resins, and properties can be extensively enhanced through specific modifications, particularly silanized nanoparticles. Optimizing 3D-printed denture acrylics requires a multifaceted approach, with future research prioritizing novel nanomaterials and surface modification techniques for a novel generation of superior performance, esthetically pleasing, and long-lasting dentures.