The importance of factorial design on the optimization of biosensor performance: immobilization of glucose oxidase as a case study.

Conventionally, the optimization of glucose biosensors is achieved by varying the concentrations of the individual reagents used to immobilize the enzyme. In this work, the effect and interaction between glucose oxidase enzyme (GOx), ferrocene methanol (Fc), and multi-walled carbon nanotubes (MWCNTs) at different concentrations were investigated by a design of experiments (DoE). For this analysis, a factorial design with three factors and two levels each was used with the software RStudio for statistical analysis. The data were obtained by electrochemical experiments on the immobilization of GOx-Fc/MWCNT at different concentrations. The results showed that the factorial DoE method was confirmed by the non-normality of the residuals and the outliers of the experiment. When examining the effects of the variables, analyzing the half-normal distribution and the effects and contrasts for GOx-Fc/MWCNT, the factors that showed the greatest influence on the electrochemical response were GOx, MWCNT, Fc, and MWCNT:Fc, and there is a high correlation between the factors GOx, MWCNT, Fc, and MWCNT:Fc, as shown by the analysis of homoscedasticity and multicollinearity. With these statistical analyses and experimental designs, it was possible to find the optimal conditions for different factors: 10 mM mL-1 GOx, 2 mg mL-1 Fc, and 15 mg mL-1 MWCNT show a greater amperometric response in the glucose oxidation. This work contributes to advancing enzyme immobilization strategies for glucose biosensor applications. Systematic investigation of DoE leads to optimized immobilization for GOx, enables better performance as a glucose biosensor, and allows the prediction of some outcomes.

Chondroitin Sulfate for Cartilage Regeneration, Administered Topically Using a Nanostructured Formulation.

In the pharmaceutical sector, solid lipid nanoparticles (SLN) are vital for drug delivery incorporating a lipid core. Chondroitin sulfate (CHON) is crucial for cartilage health. It is often used in osteoarthritis (OA) treatment. Due to conflicting results from clinical trials on CHON's efficacy in OA treatment, there has been a shift toward exploring effective topical systems utilizing nanotechnology. This study aimed to optimize a solid lipid nanoparticle formulation aiming to enhance CHON permeation for OA therapy. A 3 × 3 × 2 Design of these experiments determined the ideal parameters: a CHON concentration of 0.4 mg/mL, operating at 20,000 rpm speed, and processing for 10 min for SLN production. Transmission electron microscopy analysis confirmed the nanoparticles' spherical morphology, ensuring crucial uniformity for efficient drug delivery. Cell viability assessments showed no significant cytotoxicity within the tested parameters, indicating a safe profile for potential clinical application. The cell internalization assay indicates successful internalization at 1.5 h and 24 h post-treatment. Biopharmaceutical studies supported SLNs, indicating them to be effective CHON carriers through the skin, showcasing improved skin permeation and CHON retention compared to conventional methods. In summary, this study successfully optimized SLN formulation for efficient CHON transport through pig ear skin with no cellular toxicity, highlighting SLNs' potential as promising carriers to enhance CHON delivery in OA treatment and advance nanotechnology-based therapeutic strategies in pharmaceutical formulations.

Sustainable application of modified Luffa cylindrica biomass for removal of trimethoprim in water by adsorption with process optimization.

The present study describes a set of methodological procedures (seldom applied together), including (i) development of an alternative adsorbent derived from abundant low-cost plant biomass; (ii) use of simple low-cost biomass modification techniques based on physical processing and chemical activation; (iii) design of experiments (DoE) applied to optimize the removal of a pharmaceutical contaminant from water; (iv) at environmentally relevant concentrations, (v) that due to initial low concentrations required determination by ultra-performance liquid phase chromatography coupled to mass spectrometry (UPLC-MS/MS). A central composite rotational design (CCRD) was employed to investigate the performance of vegetable sponge biomass (Luffa cylindrica), physically processed (crushing and sieving) and chemically activated with phosphoric acid, in the adsorption of the antibiotic trimethoprim (TMP) from water. The optimized model identified pH as the most significant variable, with maximum drug removal (91.1 ± 5.7%) achieved at pH 7.5, a temperature of 22.5 °C, and an adsorbent/adsorbate ratio of 18.6 mg µg-1. The adsorption mechanisms and surface properties of the adsorbent were examined through characterization techniques such as scanning electron microscopy (SEM), point of zero charge (pHpzc) measurement, thermogravimetric analysis (TGA), specific surface area, and Fourier-transform infrared spectroscopy (FTIR). The best kinetic fit was obtained by the Avrami fractional-order model. The hypothesis of a hybrid behavior of the adsorbent was suggested by the equilibrium results presented by the Langmuir and Freundlich models and reinforced by the Redlich-Peterson model, which achieved the best fit (R2 = 0.982). The thermodynamic study indicated an exothermic, spontaneous, and favorable process. The maximum adsorption capacity of the material was 2.32 × 102 µg g-1 at an equilibrium time of 120 min. Finally, a sustainable and promising adsorbent for the polishing of aqueous matrices contaminated by contaminants of emerging concern (CECs) at environmentally relevant concentrations is available for future investigations.

Quality-by-design driven approach in the formulation of an anti-ulcer and gastro-protective oral suspension.

OBJECTIVE: This work aims to present a Quality-by-Design (QbD) step-by-step methodology to formulate anti-ulcer and gastro-protective oral suspensions. METHODS: Sucralfate was used as a drug model. The Quality Target Product Profile was established early during preformulation. Viscosity, resuspendability, pH, and density were assessed through the screening of several suspension platforms based on different prototype compositions. A compatibility study between the active pharmaceutical ingredient and the excipients was performed by thermal analysis and infrared spectroscopy. An Ishikawa fishbone diagram and Failure Mode and Effect Analysis were employed to identify the Critical Material Attributes (CMAs), Critical Process Parameters (CPPs), and Critical Quality Attributes (CQAs). CMAs' and CPPs' impact on identified CQAs was further assessed through a 22 full factorial experimental design at normal conditions after manufacture and one month at super-accelerated stress conditions. Results: The lead prototype exhibited no physicochemical incompatibilities. The risk assessment tools revealed that the concentration of the wetting agent and the total concentration of thickening agents represented critical factors for the quality profile of the preparation in terms of viscosity. The optimized formulation comprising 1.125 w/v% total concentration of Natrosol 250 HX and Avicel RC 591 exhibited an enhanced performance according to the established profile. CONCLUSIONS: The analytical and physicochemical tests showed the robustness and compliance of the final preparation with the quality profile. The proposed step-by-step methodology based on QbD, Design of Experiments, and Quality Risk Management presented in our research holds practical implications for local industries and formulation scientists involved in the development of oral suspensions.

Sustainable and Biomimetic Methodology for Extraction of High-Value-Added Compounds in Almond Hulls.

Almond trees are the most cultivated nut tree in the world. The production of almonds generates large amounts of by-products, much of which goes unused. Herein, this study aimed to develop a green chemistry approach to identify and extract potentially valuable compounds from almond by-products. Initially, a screening was performed with 10 different Natural Deep Eutectic Solvents (NADESs). The mixture lactic acid/glycerol, with a molar ratio 1:1 (1:50 plant material to NADES (w/v) with 20% v/v of water) was identified as the best extraction solvent for catechin, caffeoylquinic acid, and condensed tannins in almond hulls. Subsequently, a method was optimized by a Design of Experiment (DoE) protocol using a miniaturized extraction technique, Microwave-Assisted Extraction (MAE), in conjunction with the chosen NADESs. The optimal conditions were found to be 70 °C with 15 min irradiation time. The optimal extraction conditions determined by the DoE were confirmed experimentally and compared to methods already established in the literature. With these conditions, the extraction of metabolites was 2.4 times higher, according to the increase in total peak area, than the established literature methods used. Additionally, by applying the multiparameter Analytical Greenness Metric (AGREE) and Green Analytical Process Index (GAPI) metrics, it was possible to conclude that the developed method was greener than the established literature methods as it includes various principles of green analytical chemistry.

Amiodarone chewable gels as a potential appproach for paediatric congenital cardiopathies treatment: Comparison between animal and vegetal gelling agents.

The difficulty in swallowing is a frequent problem when oral solid dosage forms (conventional tablets or capsules) are administered to paediatric population or patients with dysphagia. An interesting alternative to overcome these problems are non-conventional formulations like chewable gels, commonly known as 'gummies'. Therefore, this work addresses the design, development and characterization of gummies using gelatine and pectin, for the vehiculization of the antiarrhythmic amiodarone (AMIO). Applying a Design of Experiments (DoE) approach, four gelatine (GG1-GG4) and eight pectin formulations (PG1-PG8) were developed. Considering the obtained results for responses during DoE evaluation (i.e., volume, syneresis, hardness, and gumminess), GG3 and PG8 were selected for complete characterization. Water activity, pH, drug content, texture parameters (adhesiveness, springiness, cohesiveness, and fracturability), disintegration time, in vitro dissolution, and microbiological features were evaluated. The obtained results were within the expected values for this type of formulation. The dissolution profiles showed a 94 % - 99 % of the AMIO content released for GG3 and PG8, respectively, so they could be considered suitable as immediate release dosage forms. In conclusion, the chewable gels were successfully developed and characterised, suggesting a potential means to accomplish a final prototype for the improvement of congenital cardiopathies treatment.

Extraction of bioactive compounds from pecan nutshell: An added-value and low-cost alternative for an industrial waste.

The pecan nutshell [Carya illinoinensis (Wangenh) C. Koch] (PNS) is a source of bioactives with important beneficial properties for the human health. PNS represents between 40-50 % of total mass of the nut, resulting as waste without any added value for the food industry. Even though a variety of methods were already developed for bioactive extraction from this waste, unconventional methodologies, or those which apart from green chemistry principles, were discarded considering the cost of production, the sustainable development goals of United Nations and the feasibility of real inclusion of the technology in the food chain. Then, to add-value to this waste, a low-cost, green and easy-scalable extraction methodology was developed based on the determination of seven relevant factors by means of a factorial design and a Response Surface Methodology, allowing the extraction of bioactives with antioxidant capacity. The pecan nutshell extract had a high concentration of phenolic compounds (166 mg gallic acid equivalents-GAE/g dry weight-dw), flavonoids (90 mg catechin equivalent-CE/g dw) and condensed tannins (189 mg CE/g dw) -related also to the polymeric color (74.6 %)-, with high antioxidant capacities of ABTS+. radical inhibition (3665 µmol Trolox Equivalent-TE/g dw) and of iron reduction (1305 µmol TE/g dw). Several compounds associated with these determinations were identified by HPLC-ESI-MS/MS, such as [Epi]catechin-[Epi]catechin-[Epi]gallocatechin, myricetin, dihydroquercetins, dimers A and B of protoanthocyanidins, ellagitannins and ellagic acid derivatives. Hence, through the methodology developed here, we obtained a phenolic rich extract with possible benefits for human health, and of high industrial scalability for this co-product transformation.

The Effect of Ultrasound on the Extraction and Functionality of Proteins from Duckweed (Lemna minor).

The inclusion of protein in the regular human diet is important for the prevention of several chronic diseases. In the search for novel alternative protein sources, plant-based proteins are widely explored from a sustainable and ecological point of view. Duckweed (Lemna minor), also known as water lentil, is an aquatic plant with potential applications for human consumption due to its protein content and carbohydrate contents. Among all the conventional and novel protein extraction methods, the utilization of ultrasound has attracted the attention of scientists because of its effects on improving protein extraction and its functionalities. In this work, a Box-Behnken experimental design was proposed to optimize the alkaline extraction of protein from duckweed. In addition, an exploration of the effects of ultrasound on the morphological, structural, and functional properties of the extracted protein was also addressed. The optimal extraction parameters were a pH of 11.5 and an ultrasound amplitude and processing time of 60% and 20 min, respectively. These process conditions doubled the protein content extracted in comparison to the value from the initial duckweed sample. Furthermore, the application of ultrasound during the extraction of protein generated changes in the FTIR spectra, color, and structure of the duckweed protein, which resulted in improvements in its solubility, emulsifying properties, and foaming capacity.

Sol-gel and Pechini niobium modified: synthesis, characterization and application in the 2,4-D herbicide degradation.

In this work, a comparison was made between the synthesis of niobium-based materials (Nb2O5), both in terms of material characterization and catalytic performance. The methods used were chemical mixtures: modified sol-gel and Pechini. The materials were calcined at different temperatures (753, 873 and 993K) and characterized by the following techniques: photoacousticspectroscopy (PAS), zero charge point (pHPZC), scanning electron microscopy (SEM/EDS), thermogravimetric analysis (TGA/DTG) and X-ray diffraction (XRD). The photocatalytic process was carried out to evaluate the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) under UV radiation (250 W mercury vapor lamp) and different experimental conditions. In addition, to better understand the influence of parameters such as pH, catalyst concentration (0.2, 0.5 and 0.8 g L-1) and calcination temperature, a Design of Experiments (DoE) was used. The results indicated that despite having similar structures and phases in the XRD analysis, the morphology presents two distinct surfaces, due to the preparation method. Differences in the synthesis method affected the catalytic activity in the parameters studied. Although the zero charge point values are close (6.18-6.36), we observed differences in the band gap depending on the calcination temperature. In the optimal condition studied, the catalyst prepared by the sol-gel method obtained the best results.

Influence of biopolymer composition and crosslinking agent concentration on the micro- and nanomechanical properties of hydrogel-based filaments.

Hydrogel filaments were manufactured using wet spinning technique, incorporating variations in the concentrations of sodium alginate, gelatin, and calcium chloride (crosslinking agent). The combination of biopolymer concentrations was determined using design of experiments (DoE) approach. The resulting filaments were produced from the developed hydrogels. Tensile and vertical strength analyses of the filaments were conducted using an electromechanical extensor. Atomic force microscopy was employed to evaluate the roughness, viscoelasticity, retraction, and deflection of the hydrogels. By employing DoE, a total of seventeen different combinations of biopolymers and crosslinkers were generated to construct the hydrogels. The filaments exhibited variations in electromechanical traction (measured in kPa) and produced distinct stress peaks. Furthermore, diverse roughness values were observed among the tested materials, with the combinations featuring higher concentrations of sodium alginate displaying the highest Young's modulus. This study demonstrates that manipulating the concentrations of biopolymers and crosslinking agents can modulate the micro and nanomechanical properties of biopolymeric filaments.

Enhancing analytical development in the pharmaceutical industry: A DoE-QSRR model for virtual Method Operable Design Region assessment.

Recently, the pharmaceutical industry has increasingly adopted the Analytical Quality by Design (AQbD) approach for analytical development. To facilitate AQbD approach implementation in the development of chromatographic methods for determining cephalosporin antibiotics, an in silico tool capable of performing virtual DoEs was developed enabling to obtain virtual operable regions of method. To this end, the drugs cephalexin, cefazolin, cefotaxime and ceftriaxone were analyzed using four experimental designs, deriving a DoE-QSRR model and employing Monte Carlo method. The DoE-QSRR model and virtual DoEs were validated using data not used in model's construction, obtaining coefficients of determination of 84.72 % for DoE-QSRR model and over 77 % for virtual DoEs. Virtual MODRs were constructed using data from the virtual DoEs. The virtual MODRs were validated by comparing them with experimental MODRs under various scenarios, with overlap areas reaching values exceeding 84 %. Therefore, the in silico tool was considered suitable for indicating analyte trends under different analytical conditions, being capable of performing virtual DoEs for cephalosporin drugs with sufficient assertiveness to guide analytical development and allow obtaining a MODR capable of providing results of adequate quality.

Quality control of psychoactive substances in human breastmilk samples from a human milk bank by disposable pipette extraction-gas chromatography-mass spectrometry.

The lack of data regarding infant exposure to drugs of abuse consumed by lactating mothers has become a major health concern. Investigating psychoactive substances and their metabolites in breastmilk is an analytical approach to estimate the rate at which drugs of abuse are excreted and how much infants are exposed to them. In this study, we have developed and validated a GC-MS method using disposable pipette tips for simultaneously extracting ten analytes from breastmilk samples obtained from a milk bank in the city of Ribeirão Preto, Brazil. All the 67 analyzed samples tested negative for all the analytes. This is the first study that has applied disposable pipette extraction to analyze drugs of abuse in breastmilk samples.

Breastfeeding, the most effective single strategy to reduce child mortality, provides numerous benefits for both the mother and the infant. The mother's consumption habits during breastfeeding strongly influence breastmilk quality and the newborn's nutrition. Given that drugs of abuse negatively affect both the mother's and the infant's health, analyzing breastmilk samples helps to estimate infant exposure to these drugs and to evaluate how severe this public health issue is. We have developed a new method to monitor ten substances in breastmilk, to improve our understanding of this issue in Brazil. None of the substances were detected in the few samples obtained from a milk bank, which showed that this organization successfully analyzes the donor's profile and conducts effective anamnesis. Future analysis of a larger number of samples and hence more data could help to describe the current scenario in more detail.

Optimizing adjuvant inhaled chemotherapy: Synergistic enhancement in paclitaxel cytotoxicity by flubendazole nanocrystals in a cycle model approach.

Lung cancer is the leading cause of cancer-related death. In addition to new innovative approaches, practical strategies that improve the efficacy of already available drugs are urgently needed. In this study, an inhalable dry powder formulation is used to repurpose flubendazole, a poorly soluble anthelmintic drug with potential against a variety of cancer lineages. Flubendazole nanocrystals were obtained through nanoprecipitation, and dry powder was produced by spray drying. Through fractional factorial design, the spray drying parameters were optimized and the impact of formulation on aerolization properties was clarified. The loading limitations were clarified through response surface methodology, and a 15% flubendazole loading was feasible through the addition of 20% L-leucine, leading to a flubendazole particle size of 388.6 nm, median mass aerodynamic diameter of 2.9 µm, 50.3% FPF, emitted dose of 83.2% and triple the initial solubility. Although the cytotoxicity of this formulation in A549 cells was limited, the formulation showed a synergistic effect when associated with paclitaxel, leading to a surprising 1000-fold reduction in the IC50. Compared to 3 cycles of paclitaxel alone, a 3-cycle model combined treatment increased the threshold of cytotoxicity by 25% for the same dose. Our study suggests, for the first time, that orally inhaled flubendazole nanocrystals show high potential as adjuvants to increase cytotoxic agents' potency and reduce adverse effects.

Development and Pharmacokinetic Evaluation of Two Parenteral Formulations of Albendazole Using Prodrug and Cosolvent Approaches.

Albendazole is a broad-spectrum anthelmintic drug used for parasitic infections. In addition, due to its mechanism of action, it has been studied as an anticancer agent. However, poor and highly variable bioavailability are limiting factors for its use in systemic illnesses. The present study aimed to develop two parenteral formulations of albendazole and to compare its pharmacokinetic profile with the conventional oral administration. Parenteral formulations were developed using two different approaches: a phosphonooxymethylated prodrug and cosolvents. For the albendazole prodrug, once synthetized, its solubility and hydrolysis with alkaline phosphatase were evaluated. A factorial design of experiments was used for the cosolvent formulation. Stability and hemolytic activity were assessed. A pharmacokinetic study was performed on New Zealand rabbits. Both formulations were administered intravenously, and the prodrug was also administered intramuscularly. Results were compared with those obtained after the oral administration of albendazole. A 20,000-fold and 6000-fold increase in albendazole solubility was found with the prodrug and cosolvent formulations, respectively. Both parenteral formulations displayed higher albendazole plasma concentrations for the first 2 h compared with oral administration, even when the oral dose was doubled. The absolute bioavailability of oral albendazole was 15.5% while for the intramuscular administration of the prodrug was 102.6%. Both parenteral formulations showed a significant decrease in the formation of albendazole sulfoxide (ANOVA p<0.05) and allowed greater exposure to albendazole. Albendazole cosolvent parenteral formulation could be a promising option in systemic illnesses considering its ease of preparation and superb pharmacokinetic performance.

Characterization of the antioxidant activity, carotenoid profile by HPLC-MS of exotic colombian fruits (goldenberry and purple passion fruit) and optimization of antioxidant activity of this fruit blend.

The consumption of antioxidants can prevent chronic non-communicable diseases and the exotic Colombian fruits, goldenberry (Physalis peruviana L.) and purple passion fruit (Passiflora edulis f. Edulis Sims), are rich in bioactive compounds. The aim of this work was to characterize and optimize the antioxidant activity of these fruits blend. The fruits were classified according to their maturity stages, the freeze-dried extracts were physiochemically characterized, and polyphenols, carotenoids and antioxidant activity were quantified, and an experimental mixture design was applied to optimize the antioxidant activity of the bend. For the goldenberry the maturity stage 3 had higher iron-reducing capacity and higher content of polyphenols. Meanwhile, for the purple passion fruit, this maturity stage had higher antioxidant activity by all methodologies and a higher concentration of polyphenols; the ultrasound-assisted extraction showed statistical differences for polyphenols, ABTS and FRAP. Antioxidant activity showed significant differences (p < 0.05) between samples (TBARS (3.98 ± 0.14 and 7.03 ± 0.85 µM-MDA/g), ABTS (36.53 ± 2.66 and 29.4 ± 4.88 µMTrolox/g), DPPH (36.53 ± 2.66 and 23.90 ± 0.96µMTrolox/g), ORAC (23.02 ± 0.36 and 32.44 ± 0.94 µM Trolox/g) and total polyphenols (5, 29 ± 0.34 and 9.12 ± 0.37mgGA/g). Some of the carotenoids identified by HPLC-MS in both fruits were lutein, α and ß-carotene, phytoene and lycopene. The optimum bend was goldenberry 0.83 and purple passion fruit 0.17.

Multivariate Optimization of Electrochemical Biosensors for the Determination of Compounds Related to Food Safety-A Review.

We summarize the application of multivariate optimization for the construction of electrochemical biosensors. The introduction provides an overview of electrochemical biosensing, which is classified into catalytic-based and affinity-based biosensors, and discusses the most recent published works in each category. We then explore the relevance of electrochemical biosensors for food safety analysis, taking into account analytes of different natures. Then, we describe the chemometrics tools used in the construction of electrochemical sensors/biosensors and provide examples from the literature. Finally, we carefully discuss the construction of electrochemical biosensors based on design of experiments, including the advantages, disadvantages, and future perspectives of using multivariate optimization in this field. The discussion section offers a comprehensive analysis of these topics.

Optimization of microfibrillated cellulose isolation from cocoa pod husk via mild oxalic acid hydrolysis: A response surface methodology approach.

Theobroma cacao L. species, cultivated worldwide for its valuable beans, generates up to 72% weight of the fruit as waste. The lack of reutilization technologies in the cocoa agroindustry has hindered the exploitation of valuable bio-components applicable to the generation of high value added bioproducts. One such bioproduct is microfibrillated cellulose (MFC), a biopolymer that stands out for its desirable mechanical properties and biocompatibility in biomedical, packing, 3D printing, and construction applications. In this study, we isolated microfibrillated cellulose (MFC) from cocoa pod husk (CPH) via oxalic acid hydrolysis combined with a steam explosion. MFC isolation started with the Solid/Liquid extraction via Soxhlet, followed by mild citric acid hydrolysis, diluted alkaline hydrolysis, and bleaching pre-treatments. A Response Surface Methodology (RSM) was used to optimize the hydrolysis reaction at levels between 110 and 125 °C, 30-90 min at 5-10% (w/v) oxalic acid concentration. The cellulose-rich fraction was characterized by Fourier-Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) analyses. Characterization analyses revealed a cellulose-rich polymer with fibers ranging from 6 to 10 µm, a maximum thermal degradation temperature of 350 °C, and a crystallinity index of 63.4% (peak height method) and 29.0% (amorphous subtraction method). The optimized hydrolysis conditions were 125 °C, 30 min, at 5% w/v oxalic acid: with a 75.7% yield. These results compare with MFC obtained through highly concentrated inorganic acid hydrolysis from different biomass sources. Thus, we show a reliable and greener alternative chemical treatment for the obtention of MFC.

An updated procedure for zeaxanthin and lutein quantification in corn grains based only in water and ethanol.

Corn grains are a major source of both the bioactive carotenoids zeaxanthin and lutein. Current methods to quantify these substances have some disadvantages related to sustainability and sample throughput. This work aimed to develop a green, efficient, rapid, and reproducible analytical method to quantify these xanthophylls in corn grains. Solvents recommended by the CHEM21 solvent selection guide were screened. The extraction by dynamic maceration and separation by ultra-high-performance liquid chromatography were optimized by design of experiments. Then, the entire analytical procedure was validated and compared with procedures used for the same purpose, including an official one, and applied to different corn samples. The proposed method was demonstrated to be greener, equal to or more efficient, faster, and more reproducible than the comparative methods. The extraction step could be scaled up for industrial production of zeaxanthin- and lutein-enriched extracts, as it uses only compatible food grade ethanol and water.

Optimization of a medium composition for the heterologous production of Alcaligenes faecalis penicillin G acylase in Bacillus megaterium.

Penicillin G acylase (PGA) is a strategic enzyme in the production processes of beta-lactam antibiotics. High demand for ß-lactam semisynthetic antibiotics explain the genetic and biochemical engineering strategies devoted towards novel ways for PGA production and application. This work presents a fermentation process for the heterologous production of PGA from Alcaligenes faecalis in Bacillus megaterium with optimization. The thermal stability from A. faecalis PGA is considerably higher than other described PGA and the recombinant enzyme is secreted to the culture medium by B. megaterium, which facilitates the separation and purification steps. Media optimization using fractional factorial design experiments was used to identify factors related to PGA activity detection in supernatant and cell lysates. The optimized medium resulted in almost 6-fold increased activity in the supernatant samples when compared with the basal medium. Maximum enzyme activity in optimized medium composition achieves values between 135 and 140 IU/ml. The results suggest a promising model for recombinant production of PGA in B. megaterium with possible extracellular expression of the active enzyme.

Experimental air conditioning energy evaluation under Caribbean climate conditions.

A 23 factorial design was performed to analyze the performance of a mini-split air conditioning system under several psychrometric air conditions at the evaporator inlet, similar to Tropical Caribbean region conditions. In addition, a search for new energy-saving opportunities was performed. The results showed that interactions between the temperature of the air inlet, the humidity of the air inlet, and the fan speed level are significant in the mini-split energy performance under Caribbean climate conditions. Hence, working on an oriented energy savings control strategy is necessary. Therefore, this study recommends developing a fan speed control scheme, generating energy savings of around 10% in the air conditioning unit.