Green reduction of ZnO nanoparticles using cationic dialdehyde cellulose (cDAC) for efficient Congo red dye removal.

More sustainable materials have been becoming an important concern of worldwide scientists, and cellulosic materials are one alternative in water decontamination. An efficient strategy to improve removal capacity is functionalizing or incorporating nanomaterials in cellulose-based materials. The new hybrid cDAC/ZnONPs was produced by green synthesis of zinc oxide nanoparticles (ZnONPs), promoting the in situ reduction and immobilization on the cationic dialdehyde cellulose microfibers (cDAC) surface to remove Congo red dye from water. cDAC/ZnONPs was characterized by scanning electron microscopy (SEM-EDS) and infrared spectroscopy (FTIR), which showed efficient nanoparticles reduction. Adsorption efficiency on cationic cellulose surface was investigated by pH, contact time, initial concentration, and dye selectivity tests. The material followed the H isotherm model, which resulted in a maximum adsorption capacity of 1091.16 mg/g. Herein, was developed an efficient and ecologically correct new adsorbent, highly effective in Congo red dye adsorption even at high concentrations, suitable for the remediation of contaminated industrial effluents.

Hydrogel Applicability for the Industrial Effluent Treatment: A Systematic Review and Bibliometric Analysis.

In recent decades, hydrogels, as adsorption materials, have received important attention due to their characteristics and properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. In the actual framework of sustainable development, it has been imperative to develop practical studies of hydrogels in the treatment of actual industrial effluents. Accordingly, the current work has, as its objective, to make evident hydrogels' applicability in the treatment of actual industrial effluents. For this purpose, a bibliometric analysis and systematic review based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method were conducted. The relevant articles were selected from the Scopus and Web of Science databases. Some important findings were that: (1) China is the leading country when it comes to hydrogel application in actual industrial effluents, (2) the motor studies are focalized on the treatment of wastewater by hydrogels, (3) the fixed-bed columns are suitable unit equipment for the treatment of industrial effluents of using hydrogels, and (4) the hydrogels show excellent adsorption capacities of ion and dye contaminants present in industrial effluents. In summary, since the implementation of sustainable development in 2015, the progress of practical hydrogel applications in the treatment of industrial effluent has been receiving more attention, and the selected studies demonstrate the implementation viability of these materials.

Biosorption mechanisms of cationic and anionic dyes in a low-cost residue from brewer's spent grain.

The brewer's spent grain (BSG) is a byproduct of the brewing industry produced in large quantities and with few ecological disposal options. The use of this low-cost residue was investigated for the removal of methylene blue (MB) and tartrazine yellow (TY) dyes. The BSG has been extensively characterized to obtain its physicochemical characteristics. Batch experiments were conducted to investigate the effects of biosorption parameters: initial pH, kinetics, equilibrium isotherms and adsorption thermodynamics. The characterization showed high carbon content and heterogeneous morphology with the presence of meso and macropores. The best experimental conditions were obtained as pH 11 for MB and pH 2 for TY. Kinetics resulted in an equilibrium time of 240 min for MB and 300 min for TY and was best represented by the pseudo-second order model. Different interaction mechanisms were suggested, such as electrostatic interactions, electron donors and electron acceptors, hydrogen bonds, π-π dispersion interactions and the dye molecules aggregation. Equilibrium data were better represented by Langmuir isotherm. The maximum adsorbed amount of MB and TY was 284.75 and 26.18 mg/g, respectively, in each better experimental condition. Through the thermodynamic analysis, it was observed that the adsorption of the dyes was spontaneous and favourable. MB is preferentially retained through chemisorption, whereas TY followed a physical process. Considering the characteristics and results found compared to the recent literature, it was verified that BSG can be used as an effective and innovative biosorbent for removal purposes of dyeing effluent.

Adsorption of methylene blue on agroindustrial wastes: Experimental investigation and phenomenological modelling.

In this work, agro-wastes coming from soursop (peel, seeds and pulp fiber) and sugarcane (bagasse) are used as low-cost biosorbents to remove methylene blue (MB) from aqueous media. Batch experiments are performed under different experimental conditions investigating the effects of biosorbent amount, dye concentration and stirring rate. The best results were found using soursop wastes for a MB concentration of 100 mg L-1, using 0.75 g of residue and a stirring rate of 110 rpm, removing a percentage above 90%. Theoretically, adsorption kinetic can be successfully described by the pseudo-second order model. Redlich-Peterson and Sips models are adopted to interpret the equilibrium adsorption of MB on sugarcane bagasse and soursop residue, respectively. Interestingly, the monolayer model with single energy derived by statistical physics theory is also applied for a deeper explanation of the adsorption mechanism of MB on both the adsorbents. The application of this model allows defining the adsorption geometry of the investigated adsorbate and provides important information about the interactions between the adsorbate and sorbents. In particular, the modelling analysis by statistical physics allows defining that the dye molecules are adsorbed in vertical position and the adsorption process is multi-molecular (i.e. n > 1). Finally, the estimation of adsorption energy suggested that MB adsorption on biosorbent is a physisorption process.