Modular and Portable System Design for 3D Imaging of Breast Tumors Using Electrical Impedance Tomography.

This paper presents a prototype of a portable and modular electrical impedance tomography (EIT) system for breast tumor detection. The proposed system uses MATLAB to generate three-dimensional representations of breast tissue. The modular architecture of the system allows for flexible customization and scalability. It consists of several interconnected modules. Each module can be easily replaced or upgraded, facilitating system maintenance and future enhancements. Testing of the prototype has shown promising results in preliminary screening based on experimental studies. Agar models were used for the experimental stage of this project. The 3D representations provide clinicians with valuable information for accurate diagnosis and treatment planning. Further research and refinement of the system is warranted to validate its performance in future clinical trials.

Utilidad de la tomografía de impedancia eléctrica para la programación del ventilador mecánico en paciente crítico pediátrico, una alternativa dinámica y no invasiva: revisión de dos casos clínicos / Utility of electrical impedance tomography for mechanical ventilator programming in pediatric critical patients, a dynamic and non-invasive alternative: a review of two clinical cases

La tomografía por impedancia eléctrica (TIE) es una modalidad de monitorización funcional respiratoria por imagen, no invasiva y libre de radiación, que permite visualizar en tiempo real la ventilación pulmonar regional y global en pacientes adultos y pediátricos conectados a Ventilación Mecánica (VM). OBJETIVO: Se describe la utilidad de la TIE en dos pacientes críticos pediátricos, en quienes no fue factible realizar medición de mecánica pulmonar, como herramienta para el ajuste de parámetros ventilatorios. CASOS CLÍNICOS: Se presentan dos pacientes pediátricos de 27 y 11 meses con condiciones clínicas diferentes, conectados a VM, en quienes se utilizó la TIE como método de monitoreo de la distribución pulmonar y titulación de la presión positiva al final de la espiración (PEEP) óptima, con el objetivo de obtener una ventilación pulmonar más homogénea. Se presentan mediciones funcionales con diferentes niveles de PEEP y valores de distribución en las distintas regiones de interés (ROI), además de un flujograma de situaciones en las que la TIE podría resultar útil para el ajuste ventilatorio. CONCLUSIÓN: La información funcional proporcionada por la TIE, permitió monitorizar de forma dinámica la VM y optimizar los parámetros ventilatorios, facilitando la implementación de estrategias de protección pulmonar en ambos pacientes, imposibilitados de realizar una medición estática de la mecánica respiratoria.

The Electrical Impedance Tomography (EIT) is a non-invasive and radiation-free respiratory functional imaging monitoring modality that allows real-time visualization of regional and global lung ventilation in adult and pediatric patients connected to mechanical ventilation (MV). OBJECTIVE: This paper describes the utility of EIT in two critical pediatric patients for whom measuring pulmonary mechanics was not feasible. EIT is used as a tool for adjusting ventilatory parameters. CLINICAL CASES: Two pediatric patients aged 27 and 11 months, with different clinical conditions, connected to MV are presented. EIT was used to monitor lung distribution and titrate the optimal Positive End-Expiratory Pressure (PEEP), to achieve more homogeneous lung ventilation. Functional measurements are presented with different PEEP levels and distribution values in different regions of interest (ROI), along with a flowchart illustrating situations where EIT could be useful for ventilatory adjustment. CONCLUSION: The functional information provided by EIT, allowed dynamic monitoring of MV, optimizing ventilatory parameters and facilitating the implementation of lung protective strategies in both patients, unable to undergo static respiratory mechanics measurements.

First real-time imaging of bronchoscopic lung volume reduction by electrical impedance tomography.

BACKGROUND: Bronchoscopic lung volume reduction (BLVR) with one-way endobronchial valves (EBV) has better outcomes when the target lobe has poor collateral ventilation, resulting in complete lobe atelectasis. High-inspired oxygen fraction (FIO2) promotes atelectasis through faster gas absorption after airway occlusion, but its application during BLVR with EBV has been poorly understood. We aimed to investigate the real-time effects of FIO2 on regional lung volumes and regional ventilation/perfusion by electrical impedance tomography (EIT) during BLVR with EBV. METHODS: Six piglets were submitted to left lower lobe occlusion by a balloon-catheter and EBV valves with FIO2 0.5 and 1.0. Regional end-expiratory lung impedances (EELI) and regional ventilation/perfusion were monitored. Local pocket pressure measurements were obtained (balloon occlusion method). One animal underwent simultaneous acquisitions of computed tomography (CT) and EIT. Regions-of-interest (ROIs) were right and left hemithoraces. RESULTS: Following balloon occlusion, a steep decrease in left ROI-EELI with FIO2 1.0 occurred, 3-fold greater than with 0.5 (p < 0.001). Higher FIO2 also enhanced the final volume reduction (ROI-EELI) achieved by each valve (p < 0.01). CT analysis confirmed the denser atelectasis and greater volume reduction achieved by higher FIO2 (1.0) during balloon occlusion or during valve placement. CT and pocket pressure data agreed well with EIT findings, indicating greater strain redistribution with higher FIO2. CONCLUSIONS: EIT demonstrated in real-time a faster and more complete volume reduction in the occluded lung regions under high FIO2 (1.0), as compared to 0.5. Immediate changes in the ventilation and perfusion of ipsilateral non-target lung regions were also detected, providing better estimates of the full impact of each valve in place. TRIAL REGISTRATION: Not applicable.

Pulmonary strain and end-expiratory lung volume during apnea test: a comparative analysis using electrical impedance tomography / Stress pulmonar y volumen pulmonar de fin de es piración durante el test de apnea: estudio compara tivo utilizando tomografía por impedancia eléctrica

Abstract The apnea test, employed for brain death assessment, aims to demonstrate the absence of respiratory drive due to hypercapnia. The tracheal oxygen insufflation apnea test mode (I-AT) involves disconnecting the pa tient from invasive mechanical ventilation (iMV) for ap proximately 8 minutes while maintaining oxygenation. This test supports the diagnosis of brain death based on a specified increase in PaCO2. Common complications include hypoxemia and hemodynamic instability, and lung collapse-induced reduction in end-expiratory lung volume (EELV). In our case series utilizing electrical impedance to mography (EIT), we observed that continuous positive airway pressure during the apnea test (CPAP-AT) effec tively mitigated lung collapse. This resulted in improved pulmonary strain compared to the disconnection of iMV. These findings suggest the potential benefits of routine CPAP-AT, particularly for potential lung donors, emphasizing the relevance of our study in providing quantitative insights into EELV loss and its association with pulmonary strain and potential lung injury.

Resumen La prueba de apnea es una técnica diagnóstica am pliamente utilizada para la evaluación de la muerte cerebral, con el objetivo de demostrar la ausencia de impulso respiratorio debido a la hipercapnia. La variante de la prueba de apnea con insuflación de oxígeno traqueal (I-AT) implica desconectar al pacien te de la ventilación mecánica invasiva (iVM) durante aproximadamente 8 minutos, manteniendo la oxigena ción mediante un catéter de insuflación. Esta prueba respalda el diagnóstico de muerte cerebral cuando se determina un aumento de la PaCO2 superior a 20 mmHg en comparación con el valor inicial o un nivel de PaCO2 superior a 60 mmHg al final de la prueba. En nuestra serie de casos, la implementación de la tomografía de impedancia eléctrica (EIT) reveló que la prueba de apnea con presión positiva continua (CPAP-AT) mitiga eficazmente el colapso pulmonar. Este enfo que resulta en una mejora en la tensión pulmonar en comparación con la desconexión de iMV, demostrando su relevancia en el contexto de potenciales donantes de pulmones.

Pulmonary strain and end-expiratory lung volume during apnea test: a comparative analysis using electrical impedance tomography.

The apnea test, employed for brain death assessment, aims to demonstrate the absence of respiratory drive due to hypercapnia. The tracheal oxygen insufflation apnea test mode (I-AT) involves disconnecting the patient from invasive mechanical ventilation (iMV) for approximately 8 minutes while maintaining oxygenation. This test supports the diagnosis of brain death based on a specified increase in PaCO2. Common complications include hypoxemia and hemodynamic instability, and lung collapse-induced reduction in end-expiratory lung volume (EELV). In our case series utilizing electrical impedance tomography (EIT), we observed that continuous positive airway pressure during the apnea test (CPAP-AT) effectively mitigated lung collapse. This resulted in improved pulmonary strain compared to the disconnection of iMV. These findings suggest the potential benefits of routine CPAP-AT, particularly for potential lung donors, emphasizing the relevance of our study in providing quantitative insights into EELV loss and its association with pulmonary strain and potential lung injury.

La prueba de apnea es una técnica diagnóstica ampliamente utilizada para la evaluación de la muerte cerebral, con el objetivo de demostrar la ausencia de impulso respiratorio debido a la hipercapnia. La variante de la prueba de apnea con insuflación de oxígeno traqueal (I-AT) implica desconectar al paciente de la ventilación mecánica invasiva (iVM) durante aproximadamente 8 minutos, manteniendo la oxigenación mediante un catéter de insuflación. Esta prueba respalda el diagnóstico de muerte cerebral cuando se determina un aumento de la PaCO 2 superior a 20 mmHg en comparación con el valor inicial o un nivel de PaCO 2 superior a 60 mmHg al final de la prueba. En nuestra serie de casos, la implementación de la tomografía de impedancia eléctrica (EIT) reveló que la prueba de apnea con presión positiva continua (CPAPAT) mitiga eficazmente el colapso pulmonar. Este enfoque resulta en una mejora en la tensión pulmonar en comparación con la desconexión de iMV, demostrando su relevancia en el contexto de potenciales donantes de pulmones.

Electrical impedance tomography: Usefulness for respiratory physiotherapy in critical illnesses.

Respiratory physiotherapy, including the management of invasive mechanical ventilation (MV) and noninvasive mechanical ventilation (NIV), is a key supportive intervention for critically ill patients. MV has potential for inducing ventilator-induced lung injury (VILI) as well as long-term complications related to prolonged bed rest, such as post-intensive care syndrome and intensive care unit acquired weakness. Physical and respiratory therapy, developed by the critical care team, in a timely manner, has been shown to prevent these complications. In this pathway, real-time bedside monitoring of changes in pulmonary aeration and alveolar gas distribution associated with postural positioning, respiratory physiotherapy techniques and changes in MV strategies can be crucial in guiding these procedures, providing safe therapy and prevention of potential harm to the patient. Along this path, electrical impedance tomography (EIT) has emerged as a new key non-invasive bedside strategy free of radiation, to allow visualization of lung recruitment. This review article presents the main and potential applications of EIT in relation to physiotherapy techniques in the ICU setting.

Physiological effect of high flow oxygen therapy measured by electrical impedance tomography in single-lung transplantation.

In patients with chronic obstructive pulmonary disease (COPD), single lung transplantation (SLT) is sometimes performed as an alternative to bilateral lung transplantation due to limited organ availability. However, the postoperative management of SLT presents challenges, including complications related to the distinct compliance of each lung. This case report presents the case of a 65-year-old male patient who underwent SLT and was in the weaning period from mechanical ventilation. High-flow oxygen therapy (HFOT) was administered, and the physiological effects were measured using electrical impedance tomography (EIT). The results demonstrated that the application of HFOT increased air trapping and overdistention in the native lung without benefiting the transplanted lung. HFOT through a tracheostomy tube or nasal cannula resulted in a more heterogeneous distribution of ventilation, with increased end expiratory lung impedance, prolonged expiratory time constants, and an increase in silent spaces. The drop in tidal impedance after applying HFOT did not indicate hypoventilation but rather overdistention and air trapping in the native lung, while the transplanted lung showed evidence of hypoventilation. These findings suggest that HFOT may not be beneficial for SLT patients and could potentially worsen outcomes. However, due to the limited scope of this case report, further prospective studies with larger patient cohorts are needed to confirm these results.

En pacientes con enfermedad pulmonar obstructiva crónica (EPOC), el trasplante pulmonar unilateral (SLT, por sus siglas en inglés) se realiza como alternativa a la disponibilidad limitada de donantes para el trasplante pulmonar bilateral. Sin embargo, el manejo postoperatorio del SLT presenta desafíos, incluyendo complicaciones relacionadas con la distinta complacencia de cada pulmón. Este reporte presenta el caso de un paciente varón de 65 años que fue sometido a un SLT y se encontraba en el proceso de destete de la ventilación mecánica. Se administró terapia de oxígeno de alto flujo (HFOT, por sus siglas en inglés) y se midieron los efectos fisiológicos utilizando la tomografía de impedancia eléctrica (EIT, por sus siglas en inglés). Los resultados demostraron que la aplicación de HFOT aumentó la retención de aire y la hiperinflación en el pulmón nativo sin beneficiar al pulmón trasplantado. Tanto la HFOT a través de un tubo de traqueostomía como a través de cánula nasal resultaron en una distribución más heterogénea de la ventilación, con un aumento en la impedancia pulmonar al final de la espiración, prolongación de las constantes de tiempo espiratorias y un aumento en los espacios silentes. La disminución de la impedancia tidal después de aplicar HFOT no indicó hipoventilación, sino más bien hiperinsuflación y retención de gas en el pulmón nativo, mientras que el pulmón trasplantado mostró evidencia de hipoventilación. Estos hallazgos sugieren que el HFOT puede no ser beneficioso para los pacientes con SLT y podría empeorar los resultados. Sin embargo, debido al alcance limitado de este informe de caso, se necesitan estudios prospectivos con cohortes de pacientes más amplias para confirmar estos resultados.

Physiological effect of high flow oxygen therapy measured by electrical impedance tomography in single-lung transplantation / Efectos fisiológicos del alto flujo de oxígeno medido por tomografía de impedancia eléctrica en trasplante unipulmonar

Abstract In patients with chronic obstructive pulmonary dis ease (COPD), single lung transplantation (SLT) is some times performed as an alternative to bilateral lung trans plantation due to limited organ availability. However, the postoperative management of SLT presents challenges, including complications related to the distinct compli ance of each lung. This case report presents the case of a 65-year-old male patient who underwent SLT and was in the weaning period from mechanical ventilation. High-flow oxygen therapy (HFOT) was administered, and the physiological effects were measured using electrical impedance tomography (EIT). The results demonstrated that the application of HFOT increased air trapping and overdistention in the native lung without benefiting the transplanted lung. HFOT through a tracheostomy tube or nasal cannula resulted in a more heterogeneous distri bution of ventilation, with increased end expiratory lung impedance, prolonged expiratory time constants, and an increase in silent spaces. The drop in tidal impedance after applying HFOT did not indicate hypoventilation but rather overdistention and air trapping in the native lung, while the transplanted lung showed evidence of hypoventilation. These findings suggest that HFOT may not be beneficial for SLT patients and could potentially worsen outcomes. However, due to the limited scope of this case report, further prospective studies with larger patient cohorts are needed to confirm these results.

Resumen En pacientes con enfermedad pulmonar obstructiva crónica (EPOC), el trasplante pulmonar unilateral (SLT, por sus siglas en inglés) se realiza como alternativa a la disponibilidad limitada de donantes para el trasplante pulmonar bilateral. Sin embargo, el manejo postoperato rio del SLT presenta desafíos, incluyendo complicaciones relacionadas con la distinta complacencia de cada pul món. Este reporte presenta el caso de un paciente varón de 65 años que fue sometido a un SLT y se encontraba en el proceso de destete de la ventilación mecánica. Se administró terapia de oxígeno de alto flujo (HFOT, por sus siglas en inglés) y se midieron los efectos fisiológicos utilizando la tomografía de impedancia eléctrica (EIT, por sus siglas en inglés). Los resultados demostraron que la aplicación de HFOT aumentó la retención de aire y la hiperinflación en el pulmón nativo sin beneficiar al pulmón trasplantado. Tanto la HFOT a través de un tubo de traqueostomía como a través de cánula nasal resultaron en una distribución más heterogénea de la ventilación, con un aumento en la impedancia pulmonar al final de la espiración, prolongación de las constantes de tiempo espiratorias y un aumento en los espacios silentes. La disminución de la impedancia tidal después de aplicar HFOT no indicó hipoventilación, sino más bien hiperinsuflación y retención de gas en el pulmón nativo, mientras que el pulmón trasplantado mostró evidencia de hipoventilación. Estos hallazgos sugieren que el HFOT puede no ser beneficioso para los pacientes con SLT y podría empeorar los resultados. Sin embargo, debido al alcance limitado de este informe de caso, se necesitan estudios prospectivos con cohortes de pacientes más amplias para confirmar estos resultados.

Dynamic relative regional lung strain estimated by computed tomography and electrical impedance tomography in ARDS patients.

BACKGROUND: In the acute distress respiratory syndrome (ARDS), specific lung regions can be exposed to excessive strain due to heterogeneous disease, gravity-dependent lung collapse and injurious mechanical ventilation. Computed tomography (CT) is the gold standard for regional strain assessment. An alternative tool could be the electrical impedance tomography (EIT). We aimed to determine whether EIT-based methods can predict the dynamic relative regional strain (DRRS) between two levels of end-expiratory pressure (PEEP) in gravity-non-dependent and dependent lung regions. METHODS: Fourteen ARDS patients underwent CT and EIT acquisitions (at end-inspiratory and end-expiratory) at two levels of PEEP: a low-PEEP based on ARDS-net strategy and a high-PEEP titrated according to EIT. Three EIT-based methods for DRRS were compared to relative CT-based strain: (1) the change of the ratio between EIT ventilation and end-expiratory lung impedance in arbitrary units ([ΔZAU low-PEEP/EELIAU low-PEEP]/[ΔZAU high-PEEP/EELIAU high-PEEP]), (2) the change of ΔZ/EELI ratio calibrated to mL ([ΔZml low-PEEP/EELIml low-PEEP]/[ΔZml high-PEEP/EELIml high-PEEP]) using CT data, and (3) the relative change of ∆ZAU (∆ZAU low-PEEP/∆ZAU high-PEEP). We performed linear regressions analysis and calculated bias and limits of agreement to assess the performance of DRRS by EIT in comparison with CT. RESULTS: The DRRS assessed by (ΔZml low-PEEP/EELIml low-PEEP)/(ΔZml high-PEEP/EELIml high-PEEP) and ∆ZAU low-PEEP/∆ZAU high-PEEP showed good relationship and agreement with the CT method (R2 of 0.9050 and 0.8679, respectively, in non-dependent region; R2 of 0.8373 and 0.6588, respectively, in dependent region; biases ranging from - 0.11 to 0.51 and limits of agreement ranging from - 0.73 to 1.16 for both methods and lung regions). Conversely, DRRS based on EELIAU ([ΔZAU low-PEEP/EELIAU low-PEEP]/[ΔZAU high-PEEP/EELIAU high-PEEP]) exhibited a weak negative relationship and poor agreement with the CT method for both non-dependent and dependent regions (R2 ~ 0.3; bias of 3.11 and 2.08, and limits of agreement of - 2.13 to 8.34 and from - 1.49 to 5.64, respectively). CONCLUSION: Changes in DRRS during a PEEP trial in ARDS patients could be monitored using EIT, based on changes in ΔZmL/EELIml and ∆ZAU. The relative change ∆ZAU offers the advantage of not requiring CT data for calibration.

Positive end-expiratory pressure induced changes in airway driving pressure in mechanically ventilated COVID-19 Acute Respiratory Distress Syndrome patients.

BACKGROUND: The profile of changes in airway driving pressure (dPaw) induced by positive-end expiratory pressure (PEEP) might aid for individualized protective ventilation. Our aim was to describe the dPaw versus PEEP curves behavior in ARDS from COVID-19 patients. METHODS: Patients admitted in three hospitals were ventilated with fraction of inspired oxygen (FiO2) and PEEP initially adjusted by oxygenation-based table. Thereafter, PEEP was reduced from 20 until 6 cmH2O while dPaw was stepwise recorded and the lowest PEEP that minimized dPaw (PEEPmin_dPaw) was assessed. Each dPaw vs PEEP curve was classified as J-shaped, inverted-J-shaped, or U-shaped according to the difference between the minimum dPaw and the dPaw at the lowest and highest PEEP. In one hospital, hyperdistention and collapse at each PEEP were assessed by electrical impedance tomography (EIT). RESULTS: 184 patients (41 including EIT) were studied. 126 patients (68%) exhibited a J-shaped dPaw vs PEEP profile (PEEPmin_dPaw of 7.5 ± 1.9 cmH2O). 40 patients (22%) presented a U (PEEPmin_dPaw of 12.2 ± 2.6 cmH2O) and 18 (10%) an inverted-J profile (PEEPmin_dPaw of 14,6 ± 2.3 cmH2O). Patients with inverted-J profiles had significant higher body mass index (BMI) and lower baseline partial pressure of arterial oxygen/FiO2 ratio. PEEPmin_dPaw was associated with lower fractions of both alveolar collapse and hyperinflation. CONCLUSIONS: A PEEP adjustment procedure based on PEEP-induced changes in dPaw is feasible and may aid in individualized PEEP for protective ventilation. The PEEP required to minimize driving pressure was influenced by BMI and was low in the majority of patients.

A low-cost, portable 32-channel EIT system with four rings based on AFE4300 for body composition analysis.

A proposed low-cost, portable, 32-channel (4 rings of 8-channel) Electrical Impedance Tomography (EIT) system based on the AFE4300 analog front-end for body composition measurement. Each ring allows obtaining the conductivity distribution of 4 cross sections, 4 cm apart; to analyze the behavior of conductivity in a volume. The switching of the 4 rings and the current injection and voltage measurement patterns are done with three Texas Instruments 74HC4067 multiplexers, which are managed by an ESP32 board. The proposed system has an average signal-to-noise ratio of 74.71 dB and a frame rate of 50 fps. The sensitivity tests to impedance and volume changes consisted of introducing 4 tubes of different diameters (2 steel and 2 polyvinyl chloride) into a tank with saline solution; then conductivity distribution images were generated in 4 cross-sections of the tank, using the algorithms Gauss-Newton and Noser. Finally, the global impedance index (GI) is calculated to estimate the volume of each tube inside the tank. The results show that the proposed system is highly sensitive to impedance and volume changes, being a promising system for monitoring tissues, and fluids biological.

The optimal PEEP after alveolar recruitment maneuver assessed by electrical impedance tomography in healthy horses.

Background: Electrical impedance tomography (EIT) has been an essential tool for assessing pulmonary ventilation in several situations, such as the alveolar recruitment maneuver (ARM) in PEEP titration to maintain the lungs open after atelectasis reversion. In the same way as in humans and dogs, in horses, this tool has been widely used to assess pulmonary aeration undergoing anesthesia, mechanical ventilation, recruitment maneuver, standing horses, or specific procedures. Objectives: The present study aimed to evaluate the distribution of regional ventilation during ARM based on lung monitoring assessment by EIT, with a focus on better recruitment associated with less or no overdistention. Methods: Fourteen horses of 306 ± 21 kg undergoing isoflurane anesthesia in dorsal recumbency were used. The animals were mechanically ventilated with a tidal volume of 14 ml kg-1 and a respiratory rate of 7-9. An alveolar recruitment maneuver was instituted, increasing the PEEP by five cmH2O every 5 min until 32 cmH2O and decreasing it by five cmH2O every 5 min to 7 cmH2O. At each step of PEEP, arterial blood samples were collected for blood gas analysis, EIT images, hemodynamic, and respiratory mechanics. Results: Associated with the CoV-DV increase, there was a significant decrease in the DSS during the ARM and a significant increase in the NSS when PEEP was applied above 12 cmH2O compared to baseline. The ComplROI showed a significant increase in the dependent area and a significant decrease in the non-dependent area during ARM, and both were compared to their baseline values. The driving pressure decreased significantly during the ARM, and Cst, PaO2, and PaO2/FiO2 ratio increased significantly. The VD/VT decreased significantly at DEPEEP17 and DEPEEP12. There was an HR increase at INPEEP27, INPEEP 32, and DEPEEP17 (p < 0.0001; p < 0.0001; and p < 0.05, respectively), those values being above the normal reference range for the species. The SAP, MAP, DAP, CI, and DO2I significantly decreased INPEEP32 (p < 0.05). Conclusion: The ARM by PEEP titration applied in the present study showed better ventilation distribution associated with better aeration in the dependent lung areas, with minimal overdistention between PEEP 17 and 12 cmH2O decreasing step. Those changes were also followed by improvements in static and regional compliance associated with increased oxygenation and pulmonary ventilation. ARM promoted a transitory decrease in arterial blood pressure and depression in CI with a concomitant drop in oxygen delivery, which should be best investigated before its routine use in clinical cases.

Electrical Impedance Tomography to Measure Spirometry Parameters in Chronic Obstructive Pulmonary Disease Patients / Tomografía por Impedancia Eléctrica para Medir Parámetros de Espirometría en Pacientes con Enfermedad Pulmonar Obstructiva Crónica

ABSTRACT Spirometry is a test for the diagnosis of chronic obstructive pulmonary disease. It is a technique that can be intolerant due to the essential use of a mouthpiece and a clamp. This study proposes the use of electrical impedance tomogra phy to measure respiratory parameters. Patients underwent spirometry and three respiratory exercises. The imped ance signals were convolved, and the resultant was analyzed by fast Fourier transform. The frequency spectrum was divided into seven segments (R1 to R7). Each segment was represented in terms of quartiles (Q25%, Q50%, Q75%). Each quartile of each segment was correlated with the spirometric parameters to obtain a fitting equation. FVC was correlated 70% with the 3 quartiles of R7, 3 equations were obtained with a fit of 60%. FEV1 correlated 70% with the Q50% of R7, obtaining an equation with a fit of 40%. FEV1/FVC correlated 69% with Q75% of R2, obtaining an equation with a fit of 60%. Spirometric parameters can be estimated from the implied carrier frequency components of the ventilatory impedance signal.

RESUMEN La espirometría es una prueba para el diagnóstico de enfermedad pulmonar obstructiva crónica. Es una técnica que puede resultar intolerante debido al uso imprescindible de una boquilla y una de pinza. Este estudio propone el uso de la tomografía de impedancia eléctrica para medir los parámetros respiratorios. Los pacientes realizaron una espi rometría y tres ejercicios respiratorios. Las señales de impedancia fueron convolucionadas, y la resultante se analizó mediante una transformada rápida de Fourier. El espectro en frecuencias se dividió en siete segmentos (R1 a R7). Cada segmento se representó en términos de cuartiles (Q25%, Q50%, Q75%). Cada cuartil de cada segmento se co rrelacionó con los parámetros espirométricos para obtener una ecuación de ajuste. La FVC se correlacionó en un 70% con los 3 cuartiles de R7, se obtuvieron 3 ecuaciones con un ajuste del 60%. El FEV1 se correlacionó en un 70% con el Q50% de R7, obteniéndose una ecuación con un ajuste del 40%. El FEV1/FVC se correlacionó en un 69% con el Q75% de R2, obteniéndose una ecuación con un ajuste del 60%. Los parámetros espirométricos pueden ser estimados a partir de los componentes de frecuencia portadora implícitos de la señal de impedancia ventilatoria.

Effect of flow rate on the end-expiratory lung volume in infants with bronchiolitis using high-flow nasal cannula evaluated through electrical impedance tomography.

OBJECTIVES: To evaluate the effects of four flow rates on the functional residual capacity (FRC) and pulmonary ventilation distribution while using a high-flow nasal cannula (HFNC). WORKING HYPOTHESIS: Our hypothesis is that flow rates below 1.5 L·kg-1 ·min-1 lead to FRC loss and respiratory distress. STUDY DESIGN: A single-center, prospective clinical study. PATIENT SELECTION: Infants diagnosed with acute viral bronchiolitis were given HFNC. METHODOLOGY: Through a prospective clinical study, the effects of four different flow rates, 2.0, 1.5, 1.0, and 0.5 L·kg-1 ·min-1 , on FRC and the pulmonary ventilation pattern were evaluated using electrical impedance tomography. The impedance variation (delta Z), end-expiratory lung volume (EELZ), respiratory rate, heart rate, respiratory distress score, and saturation/fraction of inspired oxygen ratio (SpO2 /FI O2 ), were also evaluated at each flow rate. RESULTS: Among the 11 infants included, There was a decrease in respiratory distress score at a flow rate of 1.5 L·kg-1 ·min-1 (*p = 0.021), and at a flow rate of 2.0 L·kg-1 ·min-1 (**p = 0.003) compared to 0.5 L·kg-1 ·min-1 . There was also a small but significant increase in SpO2 /FiO2 at flow rates of 1.5 (*p = 0.023), and 2.0 L·kg-1 ·min-1 (**p = 0.008) compared to 0.5 L·kg-1 ·min-1 . There were no other significant changes in the clinical parameters. In the global EELZ measurements, there was a significant increase under a flow rate of 2.0 L·kg-1 ·min-1 as compared to 0.5 L·kg-1 ·min-1 (p = 0.03). In delta Z values, there were no significant variations between the different flow rates. CONCLUSION: The ∆EELZ increases at the highest flow rates were accompanied by decreased distress scores and improved oxygenation.

Electrical impedance tomography clues to detect pulmonary thrombosis in a teenager with COVID-19.

We report a case of pulmonary thrombosis in a teenager during a hypercoagulable state associated with COVID-19 (coronavirus disease 2019) caused by SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2). A condition rare in children and adolescents, pulmonary thrombosis underdiagnosis likely increases morbidity and mortality. A pulmonary thrombosis diagnosis requires a high level of suspicion and relies on the combination of clinical presentation, D-dimer elevation, and computed tomography (CT) pulmonary angiography or ventilation/perfusion scans, imaging techniques that are difficult to perform. Electrical impedance tomography (EIT) has gained attention, as it provides real-time ventilation distribution analysis. In addition, lung pulsatility images can be obtained through this technique using electrocardiogram gating to filter out ventilation. In this case report, the reduced EIT pulsatility corresponded to the perfusion defect found on the CT scan, information that was obtained at the bedside without radiation or contrast exposure.

Electrical impedance tomography in pediatric patients with COVID-19, the first reports.

INTRODUCTION: Electrical impedance tomography (EIT) is a noninvasive, radiation-free, bedside tool to monitor ventilation distribution in real time. OBJECTIVE: To evaluate, in pediatric COVID-19 patients, the ventilation distribution using EIT and compare it to thoracic computed tomography (TCT) or chest radiograph results obtained in these patients. METHODS: This was a prospective, observational clinical study including pediatric patients admitted to the intensive care unit of a private hospital. The patients monitored with EIT tested positive for COVID-19 and were submitted to the previously mentioned radiation exams. EIT monitoring lasted 15 min and no sedation was used. RESULTS: Six patients were included in this study. The main differences observed in the EIT were in the right-left distribution and were compatible with the morphological changes found in the TCT or radiograph images due to COVID-19 infection. CONCLUSION: We conclude that EIT is ready to investigate the ventilatory profile present at different lung diseases, including COVID-19, and might postpone or mitigate the need of repeated ionizing radiation exams in the pediatric population, although larger pediatric cohorts comparing to standard radiological imaging are needed.

Anatomical atlas of the upper part of the human head for electroencephalography and bioimpedance applications.

Objective.The objective of this work is to develop a 4D (3D+T) statistical anatomical atlas of the electrical properties of the upper part of the human head for cerebral electrophysiology and bioimpedance applications.Approach.The atlas was constructed based on 3D magnetic resonance images (MRI) of 107 human individuals and comprises the electrical properties of the main internal structures and can be adjusted for specific electrical frequencies. T1w+T2w MRI images were used to segment the main structures of the head while angiography MRI was used to segment the main arteries. The proposed atlas also comprises a time-varying model of arterial brain circulation, based on the solution of the Navier-Stokes equation in the main arteries and their vascular territories.Main results.High-resolution, multi-frequency and time-varying anatomical atlases of resistivity, conductivity and relative permittivity were created and evaluated using a forward problem solver for EIT. The atlas was successfully used to simulate electrical impedance tomography measurements indicating the necessity of signal-to-noise between 100 and 125 dB to identify vascular changes due to the cardiac cycle, corroborating previous studies. The source code of the atlas and solver are freely available to download.Significance.Volume conductor problems in cerebral electrophysiology and bioimpedance do not have analytical solutions for nontrivial geometries and require a 3D model of the head and its electrical properties for solving the associated PDEs numerically. Ideally, the model should be made with patient-specific information. In clinical practice, this is not always the case and an average head model is often used. Also, the electrical properties of the tissues might not be completely known due to natural variability. Anatomical atlases are important tools forin silicostudies on cerebral circulation and electrophysiology that require statistically consistent data, e.g. machine learning, sensitivity analyses, and as a benchmark to test inverse problem solvers.

Estimation of changes in cyclic lung strain by electrical impedance tomography: Proof-of-concept study.

RATIONALE: Cyclic strain may be a determinant of ventilator-induced lung injury. The standard for strain assessment is the computed tomography (CT), which does not allow continuous monitoring and exposes to radiation. Electrical impedance tomography (EIT) is able to monitor changes in regional lung ventilation. In addition, there is a correlation between mechanical deformation of materials and detectable changes in its electrical impedance, making EIT a potential surrogate for cyclic lung strain measured by CT (StrainCT ). OBJECTIVES: To compare the global StrainCT with the change in electrical impedance (ΔZ). METHODS: Acute respiratory distress syndrome patients under mechanical ventilation (VT 6 mL/kg ideal body weight with positive end-expiratory pressure 5 [PEEP 5] and best PEEP according to EIT) underwent whole-lung CT at end-inspiration and end-expiration. Biomechanical analysis was used to construct 3D maps and determine StrainCT at different levels of PEEP. CT and EIT acquisitions were performed simultaneously. Multilevel analysis was employed to determine the causal association between StrainCT and ΔZ. Linear regression models were used to predict the change in lung StrainCT between different PEEP levels based on the change in ΔZ. MAIN RESULTS: StrainCT was positively and independently associated with ΔZ at global level (P < .01). Furthermore, the change in StrainCT (between PEEP 5 and Best PEEP) was accurately predicted by the change in ΔZ (R2 0.855, P < .001 at global level) with a high agreement between predicted and measured StrainCT . CONCLUSIONS: The change in electrical impedance may provide a noninvasive assessment of global cyclic strain, without radiation at bedside.