Longitudinal evaluation of laboratory results and method precision in worldwide erythropoietin external quality assessments.

Introduction: This study presents a longitudinal analysis of external quality assessment (EQA) results for erythropoietin (EPO) determinations conducted between 2017 and 2022 with a continuously increasing number of participating laboratories. The aim of this work was to evaluate participant performance and methodological aspects. Methods: In each of the eleven EQA surveys, a blinded sample set of lyophilized human serum containing one sample with lower EPO concentrations (L) and one with higher EPO concentrations (H) was sent to the participating laboratories. Results: A total of 1,256 measurements were included. The median (interquartile range) fraction of participants not meeting the criteria of acceptance set at 20% around the robust mean of the respective survey was 9.5% (6.1%-10.7%) (sample L) and 9.1% (5.8%-11.8%) (sample H) but lacked a clear trend in the observed period. Some surveys exhibited unusually high interlaboratory variation, suggesting interfering components in the EQA samples. Different immunological methods and reagent manufacturers also showed variability in measurement outcomes to some extent. Conclusion: These findings highlight the need for continuous quality assessment in EPO measurements to ensure patient safety and identify areas for further research and investigation.

Evaluating the Commutability of Reference Materials for α-Fetoprotein: Accurate Value Assignment With Multiple Systems and Trueness Verification.

Background: The accurate measurement of α-fetoprotein (AFP) is critical for clinical diagnosis. However, different AFP immunoassays may yield different results. Appropriate AFP reference materials (RMs) were selected and assigned accurate values for applications with external quality assessment (EQA) programs to standardize AFP measurements. Methods: Forty individual clinical samples and six different concentrations of candidate RMs (Can-RMs, L1-L6) were prepared by the Beijing Center for Clinical Laboratories. The Can-RMs were assigned target values by performing five immunoassays, using WHO International Standard 72/225 as a calibrator, and sent to 45 clinical laboratories in Beijing for AFP measurements. The commutability of all RMs was assessed based on CLSI and the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) approaches. Analytical performance was assessed for compliance based on accuracy (total error, TE), trueness (bias), and precision (CV). Results: The Can-RMs were commutable for all immunoassays using the CLSI approach and for 6 of 10 assay combinations using the IFCC approach. RMs diluted in WHO RM 72/225 were commutable among all assays with the CLSI approach, except for serum matrix (Autolumo vs. Roche analyzer) and diluted water matrix (Abbott vs. Roche/Mindray analyzer), whereas some inconclusive and non-commutable results were found using the IFCC approach. The average pass rates based on the TE, bias, and CV were 91%, 81%, and 95%, respectively. Conclusions: The commutability of the RMs differed between both evaluation approaches. The Can-RMs exhibited good commutability with the CLSI approach, suggesting their suitability for use with that approach as commutable EQA materials with assigned values and for monitoring the performance of AFP measurements.

Longitudinal evaluation of external quality assessment results for CA 15-3, CA 19-9, and CA 125.

Background: Tumor markers are established laboratory tools that help to diagnose, estimate prognosis, and monitor the course of cancer. For meaningful decision-making in patient care, it is essential that methods and analytical platforms demonstrate high sensitivity, specificity, precision, and comparability. Regular participation at external quality assessment (EQA) schemes is mandatory for laboratories. Here, a longitudinal evaluation of EQA data was performed to assess the performance of tumor marker assays over time. Methods: Longitudinal data of the cancer antigens (CA) 15-3 (n = 5,492), CA 19-9 (n = 6,802), and CA 125 (n = 5,362) from 14 INSTAND EQAs conducted between 2019 and 2023 were evaluated. A median of 197, 244 and 191 laboratories participated at the EQAs for CA 15-3, CA 19-9 and CA 125, respectively. Data evaluation encompasses intra- and inter-manufacturer specific variations over time, assay precision, and adherence to the EQA limits of ±24% for CA 15-3, ±27% for CA 19-9 and ±36% for CA 125. Results: The study showed median manufacturer-dependent differences of up to 107% for CA 15-3, 99% for CA 125, and even 549% for CA 19-9 between the highest and the lowest methods over the studied period. Regarding the normalized median of all methods, the values of the most deviant methods were 0.42 for CA 15-3, 7.61 for CA 19-9, and 1.82 for CA 125. Intra-manufacturer variability was generally low, with median coefficients of variation (CV) below 10%. As the methods were evaluated according to method-specific consensus values, most participants passed the EQAs within the acceptance criteria. When the criteria were consistently set at 24%, the central 90% of participants passed the EQAs in 78.6%-100% for CA 15-3 (with exception of AX), 89.3%-100% for CA 125, and 64.3%-100% for CA 19-9. Conclusion: While intra-method precision of most analytical platforms is acceptable for all three tumor markers, considerable inter-method variability was observed over the whole studied period demonstrating the necessity for better standardization and harmonization of the methods, development of international reference materials, and comprehensive commutability studies with patient samples.

External Quality Assessment (EQA) scheme for serological diagnostic test for SARS-CoV-2 detection in Sicily Region (Italy), in the period 2020-2022.

OBJECTIVES: Since December 2019, worldwide public health has been exposed to a severe acute respiratory syndrome caused by Coronavirus-2. Serological testing is necessary for retrospective assessment of seroprevalence rates, and the determination of vaccine response and duration of immunity. For this reason, it was necessary to introduce a panel of tests able to identify and quantify Covid-19 antibodies. METHODS: As a Regional Reference Centre, the CRQ Laboratory (Regional Laboratory for the Quality Control) developed and conducted an External Quality Assessment (EQA) panel of assays, to evaluate the quality of various methods, that were used by 288 Sicilian laboratories, previously authorized on behalf of the Public Health Service. RESULTS: The performance test was based on pooled samples with different levels of concentration of antibodies. 97 , 98, and 95 % of the participating laboratories tested all samples correctly in 2020, 2021, and 2022 respectively. The best performance was observed in the test of total Ig. The general performance of laboratories improved over the years. CONCLUSIONS: The incorrect diagnosis had and could still have important implications on vaccination cycles. Only through the effort of laboratory professionals, and the extension of the EQA scheme, a better harmonization of methods, protocols, and thus results, to guarantee a better healthcare system, will be possible.

Quantitative Evaluation of the Real-World Harmonization Status of Laboratory Test Items Using External Quality Assessment Data.

Background: In recent decades, the analytical quality of clinical laboratory results has substantially increased because of collaborative efforts. To effectively utilize laboratory results in applications, such as machine learning through big data, understanding the level of harmonization for each test would be beneficial. We aimed to develop a quantitative harmonization index that reflects the harmonization status of real-world laboratory tests. Methods: We collected 2021-2022 external quality assessment (EQA) results for eight tests (HbA1c, creatinine, total cholesterol, HDL-cholesterol, triglyceride, alpha-fetoprotein [AFP], carcinoembryonic antigen [CEA], and prostate-specific antigen [PSA]). This EQA was conducted by the Korean Association of External Quality Assessment Service, using commutable materials. The total analytical error of each test was determined according to the bias% and CV% within peer groups. The values were divided by the total allowable error from biological variation (minimum, desirable, and optimal) to establish a real-world harmonization index (RWHI) at each level (minimum, desirable, and optimal). Good harmonization was arbitrarily defined as an RWHI value ≤ 1 for the three levels. Results: Total cholesterol, triglyceride, and CEA had an optimal RWHI of ≤ 1, indicating an optimal harmonization level. Tests with a desirable harmonization level included HDL-cholesterol, AFP, and PSA. Creatinine had a minimum harmonization level, and HbA1c did not reach the minimum harmonization level. Conclusions: We developed a quantitative RWHI using regional EQA data. This index may help reflect the actual harmonization level of laboratory tests in the field.

The development and implementation of a proficiency testing program for SARS-CoV-2 using dried tube specimens in resource-limited countries.

INTRODUCTION: When COVID-19 hit the world in 2019, an enhanced focus on diagnostic testing for SARS-CoV-2 was essential for a successful pandemic response. Testing laboratories stretched their capabilities for the new coronavirus by adopting different test methods. The necessity of having external quality assurance (EQA) mechanisms was even more critical due to this rapid expansion. However, there was a lack of experience in providing the necessary SARS-CoV-2 EQA materials, especially in locations with constrained resources. OBJECTIVE: We aimed to create a PT (Proficiency testing) programme based on the Dried Tube Specimens (DTS) method that would be a practical option for molecular based SARS-CoV-2 EQA in Low- and Middle-Income Countries. METHODS: Based on previous ISO/IEC 17043:2010 accreditation experiences and with assistance from the US Centers for Disease Control and Prevention, The Supranational Reference Laboratory of Uganda (adapted the DTS sample preparation method and completed a pilot EQA program between 2020 and 2021. Stability and panel validation testing was conducted on the designed materials before shipping to pilot participants in six African countries. Participants received a panel containing five SARS-CoV-2 DTS samples, transported at ambient conditions. Results submitted by participants were compared to validation results. Participants were graded as satisfactory (≥ 80%) or unsatisfactory (< 80%) and performance reports disseminated. RESULTS: Our SARS-CoV-2 stability experiments showed that SARS-CoV-2 RNA was stable (-15 to -25 °C, 4 to 8 °C, (18 to 28 °C) room temperature and 35 to 38 °C) as well as DTS panels (4 to 8 °C, 18 to 28 °C, 35 to 38 °C and 45 °C) for a period of 4 weeks. The SARS-CoV-2 DTS panels were successfully piloted in 35 test sites from Zambia, Malawi, Mozambique, Nigeria, and Seychelles. The pilot results of the participants showed good accuracy, with an average of 86% (30/35) concordance with the original SARS CoV-2 expectations. CONCLUSION: The SARS-CoV-2 DTS PT panel is reliable, stable at ambient temperature, simple to prepare and requires minimal resources.

External quality assessment schemes in bacteriology support public health in Germany-results from 2006 to 2023.

External Quality Assessment schemes (EQAS) are mandatory to ensure quality standards in diagnostic methods and achieve laboratory accreditation. As host institution for two German culture-based bacteriology EQAS (RV-A and RV-B), we investigated the obtained data of 590 up to 720 surveys per year in RV-A and 2,151 up to 2,929 in RV-B from 2006 to 2023. As educational instruments, they function to review applied methodology and are valuable to check for systemic- or method-dependent failures in microbiology diagnostics or guidelines. Especially, containment of multi-resistant bacteria in times of rising antibiotic resistance is one major point to assure public health. The correct identification and reporting of these strains is therefore of high importance to achieve this goal. Moreover, correct antimicrobial susceptibility testing (AST) per se is important for selecting appropriate therapy, to restrict broad-spectrum antibiotics and minimize resistance development. The reports of participating laboratories displayed a high level of correct identification results in both schemes with mostly consistent failure rates around 2.2% (RV-A) and 3.9% (RV-B) on average. In contrast, results in AST revealed increasing failure rates upon modification of AST requirements concerning adherence to standards and subsequent bacterial species-specific evaluation. Stratification on these periods revealed in RV-A a moderate increase from 1.3% to 4.5%, while in RV-B failure rates reached 14% coming from 4.3% on average. Although not mandatory, subsequent AST evaluation and consistent reporting are areas of improvement to benefit public health.

Diagnostic performance of mpox virus (MPXV) real-time PCR assays: multicenter assessment and extended sensitivity analysis.

PURPOSE: To comprehensively investigate the diagnostic performance of routinely used assays in MPXV testing, the National Center of Clinical Laboratories in China conducted a nationwide external quality assessment (EQA) scheme and an evaluated nine assays used by ≥ 5 laboratories in the EQA. METHODS: MPXV virus-like particles with 2700, 900 and 300 copies/mL were distributed to 195 EQA laboratories. For extended analysis, triple-diluted samples from 9000 to 4.12 copies/mL were repeated 20 times using the assays employed by ≥ 5 laboratories. The diagnostic performance was assessed by analyzing EQA data and calculating the limits of detection (LODs). RESULTS: The performance was competent in 87.69% (171/195) of the participants and 87.94% (175/199) of the datasets. The positive percentage agreements (PPAs) were greater than 99% for samples at 2700 and 900 copies/mL, and 95.60% (761/796) for samples at 300 copies/mL. The calculated LODs for the two clades ranged from 228.44 to 924.31 copies/mL and were greater than the LODs specified by the respective kits. EasyDiagnosis had the lowest calculated LODs and showed superior performance in EQA, whereas BioGerm and Sansure, with higher calculated LODs, did not perform well in EQA. CONCLUSION: This study provides valuable information from the EQA data and evaluation of the diagnostic performance of MPXV detection assays. It also provided insights into reagent optimization and enabled prompt public health interventions for the outbreak.

Establishing Quality Assurance for HIV-1 Rapid Test for Recent Infection in Thailand through the Utilization of Dried Tube Specimens.

The present study focuses on establishing the quality assurance of laboratories for recent infections (RTRI) in Thailand. We developed a cold-chain independent method, using fully characterized plasma obtained from the Thai Red Cross Society, and prepared as dried tube specimens (DTS). Twenty microliters of HIV-seronegative, recent, and long-term infected samples were aliquoted into individual tubes and dried at room temperature, 20-30 degrees Celsius, in a biosafety cabinet overnight to ensure optimal preservation. The DTS external quality control and external quality assessment were tested for homogeneity and stability following the ISO/Guide 35 guidelines. The DTS panels were distributed to 48 sites (FY 2022) and 27 sites (FY 2023) across 14 and 9 provinces, respectively, in Thailand. The results from participating laboratories were collected and evaluated for performance. The results were scored, and acceptable performance criteria were defined as the proportion of panels correctly tested, which was set at 100%. The satisfactory performance ranged from 96% to 100% and was not significantly different among the 13 health regions. The developed and implemented DTS panels can be used to monitor the quality of RTRI testing in Thailand.

OILVEQ: an Italian external quality control scheme for cannabinoids analysis in galenic preparations of cannabis oil.

OBJECTIVES: Italy legalized cannabis oil for specific medical conditions (neuropathic pain, refractory epilepsy and other established pathologies) in 2015, but mandates titration of principal cannabinoids before marketing each batch using iphenated techniques coupled with mass spectrometry. To assess reliability of laboratories from the Italian National Health Service in charge of titrating the batches, the Italian National Institute of Health set up an quality control program on determination of Δ9-tetrahydrocannabinol l (THC), cannabidiol (CBD), Δ9-tetrahydrocannabinolic acid A (THCA-A) and cannabidiolic acid (CBDA) in cannabis oil preparations. METHODS: Two rounds of exercises have been carried out since 2019, involving sixteen Italian laboratories. Five different cannabis oil samples (19-1A and 19-1B for the first round and 22-1A, 22-1B and 22-1C for the second one were prepared and 1 mL amount of each sample was sent to the laboratories. The quantitative performance of each laboratory was assessed calculating the z-score value, a statistical measurement for value's relationship to the mean of a group of values. RESULTS: In the first round, eight out of fourteen laboratories employed an LC-MS while the remaining six used GC-MS. Differently, in the second round, six out of eleven laboratories employed a GC-MS while the remaining five used LC-MS. In the first round, only 28.6 % laboratories achieved an acceptable performance (z-score±2), and all of them used LC-MS as analytical method. In the second round, none of the laboratories achieved an acceptable performance. Satisfactory results, based on z-scores, were generally low (0.0-75.0 %), with only one exception of 100 % for THCA-A determination in sample 22-1B. In the second round, three false negatives (two THC and one CBD by GC-MS determination) were reported while no false positives were described in the blank sample. The two rounds yielded a mean ERR% of 42 % approximately and a mean CV% around 70 % in GC-MS determination. When applying LC-MS determination, the two rounds yielded a mean ERR% of 36 % approximately and a mean CV% around 33 %. CONCLUSIONS: The obtained results underline the need for a clear and consistent protocol to be adopted by all laboratories intending to include the titration of oily cannabis-based products into their routinely analytical techniques. This emphasis on methodology standardization and participation to quality control schemes is essential for ensuring reliable and accurate measurements, ultimately enhancing the overall effectiveness and reliability of medical cannabis treatments.

National tertiary public hospital performance appraisal: Using FOCUS-PDCA to improve external quality assessment.

PURPOSE: To innovatively use the FOCUS-PDCA quality improvement strategy to establish an external quality assessment (EQA) working group to continuously improve EQA performance, an important indicator of the national tertiary public hospital performance appraisal. METHODS: The project was carried out at the National Center for Clinical Laboratories. Using FOCUS-PDCA, which combines problem-focused steps (FOCUS) and improvement steps (PDCA), a project team was established to carry out improvement work. Root cause analysis was carried out to analyze the problems in quality control from EQA project application to results analysis and an improvement plan was implemented according to the steps of FOCUS-PDCA. The project was executed in three cycles from 2019 to 2021 to obtain more satisfactory results. RESULTS: After implementing three cycles of FOCUS-PDCA, the EQA participation rate increased from 66.5% in 2018 to 100% in 2021, and the EQA pass rate increased from 94.9% in 2018 to 99.3% in 2021. Consequently, the hospital moved into the top 50 in performance assessment for the first time in 2020 and ranked 27th in 2021. CONCLUSION: The use of the FOCUS-PDCA quality improvement strategy can improve the EQA performance of national tertiary public hospitals and help them achieve satisfactory results in the national examination.

Improving drinking water quality through proficiency testing-the impact of testing method and accreditation status on Escherichia coli detection by Canadian environmental testing laboratories.

Water quality testing is crucial for protecting public health, especially considering the number of boil water advisories annually issued across Canada that impact daily life for residents in affected areas. To overcome these challenges, the development of drinking water safety plans and accessibility to regular testing using simple, rapid, and accurate materials are necessary. However, the significance of monitoring the accuracy of environmental microbiology testing laboratories cannot be overlooked. Participation in external quality assessment programs, such as those that include proficiency testing (PT), is a necessary risk management resource that ensures the effectiveness of these testing processes. Proficiency Testing Canada (PTC), in collaboration with the Canadian Microbiological Proficiency Testing (CMPT) program based at the University of British Columbia, have implemented a drinking-water microbiology PT program since 1996. Both PTC and CMPT are ISO/IEC 17043:2010-accredited EQA providers. The drinking water program provided PT challenges to subscribing testing laboratories twice per year. Each challenge consisted of four samples containing unknown concentrations of Escherichia coli (E. coli) and Enterobacter spp. Results from participants were assessed for accuracy based on the method of testing. This cross-sectional study evaluated 150 rural and metropolitan testing sites across Canada between 2016 and 2022. Multivariable logistic regression analysis was conducted to examine the impact of different testing methods and laboratory accreditation status on the proficiency scores. This approach enabled us to assess the association between multiple independent variables and the likelihood of achieving specific proficiency scores, providing insights into how testing methods and accreditation status affect overall performance. After adjusting for rural residence, testing time, and survey year, the membrane filtration method was positively associated with the likelihood of scoring satisfactory results compared to the enzyme-substrate method (OR: 1.75; CI: 1.37-2.24), as well as accreditation status (OR: 1.47; CI: 1.16-1.85). The potential for improvement in environmental laboratory testing performance through the implementation of regulated PT in drinking water safety plans is proposed, along with the need for reliable testing methods applicable to rapid drinking water microbiology testing.

Technical and health governance aspects of the external quality assessment system for classical and new psychoactive substances analysis testing in blood.

New psychoactive substances (NPS) are uncontrolled analogues of existing drugs or newly synthesized chemicals that exhibit psychopharmacological effects. Due to their diverse nature, composition, and increasing prevalence, they present significant challenges to the healthcare system and drug control policies. In response, healthcare system laboratories have developed analytical methods to detect NPS in biological samples. As a Regional Reference Centre, the Sicilian CRQ Laboratory (Regional Laboratory for Quality Control) developed and conducted an External Quality Assessment (EQA) study to assess, in collaboration with the Istituto Superiore di Sanità (ISS), the ability of different Italian laboratories to identify NPS and traditional drugs of abuse (DOA) in biological matrices. Two blood samples were spiked with substances from various drug classes, including synthetic cannabinoids, cathinones, synthetic opiates, and benzodiazepines, at concentrations ranging from 2 to 10 ng/mL. The blood samples were freeze-dried to ensure the stability of DOA and NPS. Twenty-two laboratories from the Italian healthcare system participated in this assessment. The information provided by the laboratories during the registration in an in-house platform included a general description of the laboratory, analytical technique, and the chosen panels of analytes. The same platform was employed to collect and statistically analyze the data and record laboratory feedback and comments. The evaluation of the results revealed that the participating laboratories employed three different techniques for analyzing the samples: GC-MS, LC-MS, and immunoenzymatic methods. Approximately 90 % of the laboratories utilized LC-MS techniques. Around 40 % of false negative results were obtained, with the worst results in the identification of 5-chloro AB PINACA. The results showed that laboratories that used LC-MS methods obtained better specificity and sensitivity compared to the laboratories using other techniques. The results obtained from this first assessment underscore the importance of external quality control schemes in identifying the most effective analytical techniques for detecting trace molecules in biological matrices. Since the judicial authorities have not yet established cut-off values for NPS, this EQA will enable participating laboratories to share their analytical methods and expertise, aiming to establish common criteria for NPS identification.

Evaluating proficiency testing implementation and identifying challenges that government comprehensive specialized hospital laboratories in northwest Ethiopia faced as they participated in the external quality assessment scheme: A document-based, interview-driven evaluation.

OBJECTIVES: To assess the implementation of proficiency testing in the northwest Ethiopian government comprehensive specialized hospital laboratories, with a focus on identifying and understanding the challenges encountered during their participation in the external quality assessment scheme. METHODS: A cross-sectional study was conducted among 3 comprehensive specialized hospitals in northwest Ethiopia, analyzing 41 documented laboratory test parameters from 2020 to 2022. In addition, face-to-face, in-depth interviews were carried out to identify the major challenges the participating institutions faced. RESULTS: The study covered a total of 41 tests across 9 cycles. Overall, proper implementation of proficiency testing was observed in 59.3% of the tests, with 61.8% maintaining consistent implementation status over 3 consecutive years. In addition, the overall performance of the laboratory was 54.3%, with a 68.7% participation rate. The predominantly identified challenges included the lack of participation, insufficient reagents and supplies, inadequacy of suitable proficiency testing materials, equipment malfunction and downtime, lack of management support, insufficient budget, and inadequate training and awareness. CONCLUSIONS: The results of this study highlight the ineffective implementation of proficiency testing. Contributing factors include personnel issues, equipment and supplies challenges, managerial shortcomings, difficulties with proficiency testing providers, budgetary constraints, and a lack of training and motivation.

Understanding the limitations of your assay using EQA data with serum creatinine as an example.

OBJECTIVES: Laboratories need to take into consideration the specificity and imprecision of assays not only in verification, but also of quality assessment. This study investigates the composition of serum used in EQA materials by comparing material from a single and multiple donors (pooled material), across multiple methods, using creatinine as an example. METHODS: Sixteen different serum matrices were distributed as 36 specimens through the UK NEQAS for Acute and Chronic Kidney Disease Scheme from March 2022 to March 2023. Male-only and female-only serum was used as single donations, pooled donations, unmanipulated or with added exogenous creatinine. Specimens were distributed to primarily UK participants (approximately n=500) for creatinine analysis. Data has been reviewed by method compared to the enzymatic creatinine method principle mean. RESULTS: From the 16 different matrices, only the enzymatic creatinine assay systems from Roche Cobas and Siemens Atellica met the minimum acceptable bias goal, from biological data, of 5.6 %, in all specimens. Pooled material showed less variation in bias across all methods. CONCLUSIONS: Since Laboratories invest a lot of time and money in quality management, they need to know the limitations of their assays so that they are not investigating 'apparent' EQA/IQC problems which are purely due to non-specific, imprecise assay, rather than an analytical issue in their laboratory. When large numbers of individual donations are combined, interferents are essentially diluted out. Therefore, if EQA material is of this type it will be very difficult to determine the actual assay's bias and variability.

External quality assurance program for diagnostic complement laboratories: evaluation of the results of the past seven years.

Introduction: The complement external quality assurance (EQA) program was first organized in 2010 by a group of researchers working in diagnostic complement laboratories. Starting in 2016, INSTAND e.V., a German, non-profit interdisciplinary scientific medical society dedicated to providing expert EQA programs for medical laboratories, started organizing the EQAs for complement diagnostic laboratories together with the same group of experienced scientists and doctors who also work as EQA experts. The aim of the current work is to provide descriptive analysis of the past seven years' complement EQA results and evaluate timeline changes in proficiency testing. Methods: Each year, in March and October, blinded samples (normal, pathological) were sent to the participating diagnostic laboratories, where complement parameters were evaluated exactly as in daily routine samples. Since no reference method/target values exist for these parameters, and participants used different units for measurement, the reported results were compared to the stable mean (Algorithm A) of the participants using the same method/measurement units. A reported result was qualified as "passed" if it fell into the 30-50% evaluation/target range around the mean of reported results (depending on the given parameter). Results: While the number of participating laboratories has increased in the past years (from around 120 to 347), the number of complement laboratories providing multiple determinations remained mostly unchanged (around 30 worldwide). C3, C4, C1-inhibitor antigen and activity determinations provided the best proficiency results, with >90% passing quotas in the past years, independent of the applied method. Determination of the functional activity of the three activation pathways was good in general, but results showed large variance, especially with the pathological samples. Complement factor C1q and regulators FH and FI are determined by only a few laboratories, with variable outcomes (in general in the 85-90% pass range). Activation products sC5b-9 and Bb were determined in 30 and 10 laboratories, respectively, with typical passing quotas in the 70-90% range, without a clear tendency over the past years. Conclusion: With these accumulated data from the past seven years, it is now possible to assess sample-, method-, and evaluation related aspects to further improve proficiency testing and protocolize diagnostic complement determinations.

The European Organisation of External Quality Assurance Providers in Laboratory Medicine (EQALM) Statement: guidelines for publishing about interlaboratory comparison studies (PubILC).

Data and results from interlaboratory comparison (ILC) studies, external quality assessment (EQA) and proficiency testing (PT) activities are important and valuable contributions both to the further development of all disciplines of medical laboratory diagnostics, and to the evaluation and comparison of in vitro diagnostic assays. So far, however, there are no recommendations as to which essential items should be addressed in publications on interlaboratory comparisons. The European Organization of External Quality Assurance Providers in Laboratory Medicine (EQALM) recognized the need for such recommendations, and these were developed by a group of experts. The result of this endeavor is the EQALM Statement on items recommended to be addressed in publications on interlaboratory comparison activities (PubILC), in conjunction with a user-friendly checklist. Once adopted by authors and journals, the EQALM Statement will ensure essential information and/or study-related facts are included within publications on EQA/PT activities.

Performance of direct oral anticoagulant (DOAC) testing by hemostasis laboratories: The Australasian/Asia-Pacific experience.

INTRODUCTION: Direct oral anticoagulants (DOACs) reflect anticoagulation agents given to treat or prevent thrombosis, having largely replaced vitamin K antagonists (VKAs) such as warfarin. DOACs are given in fixed daily doses and generally do not need monitoring. However, there may be a variety of reasons that justify measurement of plasma DOAC levels in individual patients. METHODS: We report updated findings for DOAC testing in our geographic region, using recent data from the RCPAQAP, an international external quality assessment (EQA) program, currently with some 40-60 participants in each of the different DOAC (rivaroxaban, apixaban, dabigatran) modules, to assess laboratory performance in this area. Data has been assessed for the past 5 years (2019-2023 inclusive), with 20 samples each per DOAC. RESULTS: Data shows a limited repertoire of assays in use, and mostly consistency in reported numerical values when assessing proficiency samples. Available assays mostly comprised reagents from four manufacturing suppliers. There was good consistency across what participants identified as 'DOAC detected', but some variability when participants attempted to grade DOAC levels as low vs moderate vs high. Inter-laboratory/method coefficient of variation (CVs) were generally <15% for each DOAC, when present at >100 ng/mL. CONCLUSION: We hope our findings, reflecting on mostly consistent reporting of DOAC levels and interpretation provides reassurance for clinicians requesting these measurements, and helps support their implementation in regions where there is a paucity of test availability.

Evaluation of imprecision in the different detection methods of Zn based on 5 years of data from an external quality assessment program in China.

BACKGROUND: This study examines the imprecision of zinc (Zn) measurements across various clinical detection methods by analyzing the external quality assessment (EQA) data from 2018 to 2022. The findings of this study aim to offer recommendations for enhancing Zn measurements. METHODS: Participating laboratories were grouped into peer categories based on the detection methods. The robust mean and coefficient of variation (CV) of the samples were calculated following ISO 13528 guidelines. The evaluation criteria for optimal, desirable, and minimum allowable imprecision in Zn estimation are 2.50%, 5.05%, and 7.55%, respectively, based on biological variation. Furthermore, the study examined inter-lab CVs, inter-method bias, and the passing rate. The impact of sample concentration on CVs and the pass rate was also investigated. RESULTS: Over the past five years, 4283 laboratories participated in the EQA program, showing a high pass rate that improved as sample concentration increased. Differential pulse polarography (DPP) demonstrated stable and low CVs (0.61-1.86%). Although differential pulse stripping (DPS) was less stable than DPP, it still exhibited a low CV (0.71-3.10%). Graphite furnace atomic absorption spectrometry (GFAAS) and flame atomic absorption spectrometry (FAAS) performed similarly and displayed stable CVs (2.39-4.42%) within the acceptable range of desirable imprecision (5.05%). However, the CVs for ICP-MS were unacceptable in three out of the five years (5.28-6.20%). In 2022, the number of participating laboratories for DDP, DPS, GFAAS, FAAS and ICP-MS is 131, 35, 35, 820 and 72, respectively. CONCLUSION: This study provides reliable insights into the imprecision of Zn measurements in clinical laboratories. The findings indicate that additional efforts are required to reduce the imprecision of ICP-MS in Zn measurements.

Navigating Quality Assessment Hurdles in Clinical Laboratory Services: A Comprehensive Review in Resource-Limited Settings.

External quality assessment is the process of evaluating the performance of a laboratory and the competence of professionals. Participation in EQA and standardizing the quality of laboratory services are a mandatory requirements for accreditation. This review is aimed at identifying and discussing challenges that hinder the effective implementation of an EQA program in countries with resource limited setting. To obtain abundant information, articles were identified by searching the literature publishedin English using the National Library of Medicine, PubMed, Science Direct and AMC digital library databases. The articles identified in the references were manually searched and included. After the article was identified, it was imported to Endnote version 8.1 and exported to Microsoft Word for citation. Based on this review, the major identified challenges that hinder the implementation of an EQA program include the high cost of control materials, malfunction and lack of maintenance for equipment failure and breakdown, a knowledge gap among laboratory professionals, noncommutability of control samples, and difficulty in assigning target values. In addition, failing to participate in EQA and failing to take corrective action are the major challenges identified. As a result, applying to an EQA program in resource-limited counties was highly challenging. To attain high performance in the laboratory and to provide quality laboratory service for patient care, the EQA supplier and the user laboratory must pay attention to these issues and take appropriate corrective actions for ongoing quality improvement and accreditation.