Comparative Evaluation of Microtensile Bond Strength in Three Different Dentin Luting Agents: An In vitro Study.

Aim: Long-term clinical success on indirect restorations is largely determined by bonding efficiency of the luting agent, with adhesion to dentin being the main challenge. Therefore, aim of this study was to assess the microtensile bond strength when using flowable resin composite, preheated resin composite and dual self-adhesive resin cement as dentin luting agents. Materials and Methods: Occlusal thirds of molar teeth were cut and randomly divided into 3 groups to be cemented: RelyX™U200, Filtek™ Z250 XT- preheated to 70° and Filtek Flow™ Z350XT. They were then thermocycled 5000 times between 5+/-2°C and 55+/-2°C. Subsequently, 10 microbars per group were prepared. The 30 samples were placed in saline solution for 24 hours at room temperature prior to microtensile test. This was performed with a digital universal testing machine at a crosshead speed of 0.5 mm/min. The bond strength values obtained were analyzed in Megapascals (MPa). Measures of central tendency such mean and measures of dispersion such standard deviation were used. In addition, the Kruskall Wallis non-parametric test with Bonferroni post hoc test was applied, considering a significance value of 5% (P < 0.05), with type I error. Results: The dentin microtensile bond strengths of preheated resin composite, flowable resin composite and dual self-adhesive cement were 6.08 ± 0.66 Mpa, 5.25 ± 2.60Mpa and 2.82 ± 1.26Mpa, respectively. In addition, the preheated resin composite exhibited significantly higher microtensile bond strength compared to the dual self-adhesive cement (P < 0.001). While the flowable resin composite showed no significant difference with the dual self-adhesive cement (P = 0.054) and the preheated resin composite (P = 0.329). Conclusions: The microtensile bond strength in dentin was significantly higher when using a preheated resin composite at 70°C as a luting agent compared to dual self-adhesive cement. However, the preheated resin composite showed similar microtensile bond strength compared to the flowable resin composite.

Comparing the effectiveness of caries arrest by micro-operative treatment to operative treatment: A 2-year randomized controlled clinical trial.

OBJECTIVES: To compare the effectiveness of caries arrest by micro-operative treatment (sealing) to operative treatment (flowable resin composite restoration) through a 2-year randomized controlled clinical trial. MATERIALS AND METHODS: A prospective randomized controlled trial was conducted among 7-9-year-old children. At baseline, 630 subjects were screened and 92 children who had at least one carious lesion classified as ICDAS 3 on the pit and fissure of first permanent molar were included. Then they were randomly assigned to the sealant group (73 lesions) and the flowable resin composite group (76 lesions) to receive the corresponding intervention. Lesions status in each group was evaluated every 6 months up to 24 months. Clinical progression of dental caries and materials retention were the outcomes used for group comparisons at p-value < 0.05. RESULTS: After 24 months, three lesions (4.1%) in the sealant group clinically progressed to dentin caries. No lesion in the flowable composite group was observed a progression. The results of Life-table survival analysis show that the cumulative caries arrest rate had no statistically significant difference between the two groups (p = 0.075). However, the cumulative retention rate was 57.5% in the sealant group and 92.1% in the flowable composite group, with significant differences (p < 0.001). The multilevel mixed model showed the sealant had higher risk of retention failure than the flowable composite (OR = 8.66, p < 0.001), while tooth position did not influence material retention (p = 0.083). In addition, the results of Fisher Exact test show that dentin lesions had more retention failure than enamel lesions in the sealant group (p = 0.026). CONCLUSION: Although sealing microcavitated carious lesions of the first permanent molar achieved lower retention rate than resin composite restoration, both sealing and restoration effectively arrested caries progression for two years. CLINICAL RELEVANCE: To preserving dental structure and delaying or eliminating the need for operative procedures, microcavitated carious lesion can be arrested by sealing. TRIAL REGISTRATION: Registered at http://www.chictr.org.cn ; Feb 15th, 2020; No. ChiCTR2000029862.

Transitioning from injectable resin composite restorations to resin composite CAD/CAM veneers: A clinical report.

OBJECTIVE: To describe a shift from injectable resin composite technique to composite resin computer-aided design and computer-aided manufacturing (CAD/CAM) veneers in addressing esthetic concerns associated with diastemas between anterior lower teeth in a clinical case. CLINICAL CONSIDERATIONS: Among several techniques proposed for direct resin composite restoration, the "Injectable resin composite technique" has gained popularity for its time-efficiency, reduced technique sensitivity, and diminished reliance on clinician skills. However, challenges such as staining and the need for frequent polishing follow-ups may prompt the consideration of more stable alternatives such as indirect veneer restorations. While ceramic veneers offer superior mechanical and optical properties, resin ceramic veneers, especially those milled from CAD/CAM resin ceramic blocks, offer advantages such as rapid, cost-effective production, simplified intra-oral repairs, less susceptibility to fracture, superior stress absorption, and requires minimal tooth preparation, making them an appealing option for many patients. Moreover, a fully-digital approach not only streamlines the process but also saves time and labor while ensuring the delivery of high-quality restorations to patients. CONCLUSION: In addressing a patient's dissatisfaction with constant polishing of direct resin composite restorations, a shift to resin composite CAD/CAM veneers was implemented. Utilizing a fully-digital approach with CAD/CAM resin ceramic restorations successfully restored both esthetics and function. CLINICAL SIGNIFICANCE: While the injectable resin composite technique achieves immediate esthetic results, its low color stability necessitates frequent polishing sessions. The replacement of direct resin composite restorations with CAD/CAM resin composite veneers becomes a viable option for patients seeking more stable restorations that require fewer follow-ups. This transition addresses both esthetic concerns and the need for enduring solutions in restorative dentistry.

Repair of monolithic zirconia restorations with different direct resin composites: effect on the fatigue bonding and mechanical performance.

OBJECTIVE: The study aims to evaluate the shear bond and flexural strength fatigue behavior of yttrium-stabilized zirconia (4YSZ) repaired using different resin composites. MATERIALS AND METHODS: Cylindric specimens of 4YSZ were obtained for the bond strength (Ø = 6 mm, 1.5 mm of thickness) and biaxial flexural strength (Ø = 15 mm, 1 mm of thickness) fatigue tests and divided into 3 groups according to the repair resin composite: EVO (nanohybrid), BULK (bulk-fill), and FLOW (flowable). The zirconia surface was air-abraded with alumina particles, a 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) primer was applied, and the resin composite was build-up over the zirconia. Fatigue shear bond strength and flexural fatigue strength tests were performed (n = 15). One-way ANOVA and Tukey post hoc tests were carried out for both outcomes, besides scanning electron microscopy and finite element analysis. RESULTS: The repair material affected the fatigue shear bond strength of zirconia ceramic. The BULK group (18.9 MPa) depicted higher bond strength values than FLOW (14.8 MPa) (p = 0.04), while EVO (18.0 MPa) showed similar results to both groups. No effect was observed for the mechanical behavior (p = 0.53). The stress distribution was similar for all groups. CONCLUSION: The repair of yttrium-stabilized zirconia (4YSZ) ceramics with bulk-fill resin composites was the best option for high fatigue bond strength. However, the fatigue mechanical performance was similar regardless of the applied repair material. CLINICAL RELEVANCE: The repair of yttrium-stabilized zirconia (4YSZ) monolithic restorations may be performed with nanohybrid and bulk-fill resin composites in order to promote longevity in the treatment.

Injectable Composite Resin Technique: An Alternative for Anterior Esthetic Restorations - Case Report / Técnica de Resina Compuesta Inyectable: Una Alternativa para Restauraciones Estéticas Anteriores - Reporte de Caso

This article aims to describe a clinical case of the use of the injectable restorative technique with composite resin in a patient with an esthetic complaint in the anterior teeth. Producing direct restorations in anterior teeth when performed with composite resin demands a long clinical time. Results often depend on the operator's ability to reproduce proper form, function, and esthetics. Lately, the versatility of composite resins has increased. As this material evolved, new techniques were introduced to simplify the restorative process and save time. The restorative technique with injectable fluid composite resin, in addition to delivering faster and with a certain ease, is capable of increasing the predictability of treatment results. However, it is known that flowable resins have lower wear resistance and color stability compared to conventional resins. Thus, a version of this material with a higher filler content in its composition was introduced to the market, to improve wear resistance and gloss retention. Long-term studies evaluating the use of low-viscosity resins are needed. The injectable technique can accurately reproduce the morphology obtained in the wax-up of the case, generating a satisfactory esthetic and functional result. Despite simplifying the fabrication of restorations when compared to the conventional technique, it is still necessary for the operator to have some experience and aptitude. The clinical time for the production of restorations has been considerably reduced. The material showed good flow, shine, and polish in the immediate result. However, the finishing and polishing of the restorations required a longer clinical period than usual and in the short- term follow-up, flaws in the gingival margins and a new finishing and polishing procedure were necessary. Therefore, the technique described in this article can be considered a restorative alternative, but it is still not able to replace the tradit ional method of making previous esthetic restorations.

Este artículo tiene como objetivo describir un caso clínico del uso de la técnica restauradora inyectable con resina compuesta en un paciente con una queja estética en los dientes anteriores. Producir restauraciones directas en dientes anteriores cuando se realizan con resina compuesta demanda un largo tiempo clínico. Los resultados a menudo dependen de la capacidad del operador para reproducir la forma, la función y la estética adecuadas. Últimamente, la versatilidad de las resinas compuestas ha aumentado. A medida que este material evolucionó, se introdujeron nuevas técnicas para simplificar el proceso de restauración y ahorrar tiempo. La técnica restauradora con resina compuesta fluida inyectable, además de una entrega más rápida y segura, es capaz de aumentar la previsibilidad de los resultados del tratamiento. Sin embargo, se sabe que las resinas fluidas tienen menor resistencia al desgaste y estabilidad del color en comparación con las resinas convencionales. Así, se introdujo en el mercado una versión de este material con un mayor contenido de relleno en su composición, con el objetivo de mejorar la resistencia al desgaste y la retención del brillo. Se necesitan estudios a largo plazo que evalúen el uso de resinas de baja viscosidad. La técnica inyectable es capaz de reproducir fielmente la morfología obtenida en el encerado del caso, generando un resultado estético y funcional satisfactorio. A pesar de simplificar la fabricación de restauraciones en comparación con la técnica convencional, todavía es necesario que el operador tenga cierta experiencia y aptitud. El tiempo clínico para la producción de restauraciones se ha reducido considerablemente. El material mostró buena fluidez, brillo y pulido en el resultado inmediato. Sin embargo, el acabado y pulido de las restauraciones requirió de un período de tiempo clínico más largo de lo habitual y en el seguimiento a corto plazo, fueron necesarios defectos en los márgenes gingivales y un nuevo procedimiento de acabado y pulido. Por lo tanto, la técnica descrita en este artículo puede considerarse una alternativa restauradora, pero aún no es capaz de reemplazar el método tradicional de realizar restauraciones estéticas previas.

12-Month flexural mechanical properties of conventional and self-adhesive flowable resin composite materials.

The aim of this study was to investigate the 12-month flexural mechanical properties of 23 flowable resin-based composites (FRBC) that included 5 self-adhesive FRBC materials. Specimens were evaluated following ISO 4049:2019 guidelines, but additionally stored in physiologic 0.2M phosphate buffered saline solution being tested at 24 h, 1 week, 1 month, and at 3-, 6-, 9-, and 12-months. While some deviation and degradation were noted at testing intervals, conventional FRBC materials overall demonstrated greater flexural strength than the self-adhesive and compomer materials. Three self-adhesive materials and the compomer were below recommended ISO 4049:2019 flexural strength values at 24 h with another after 6 months storage. Conventional FRBC materials, except at 1 month, overall demonstrated increased flexural modulus than the self-adhesive FRBC materials. Although results were material dependent, conventional FRBC materials demonstrated overall greater flexural mechanical properties as compared to the self-adhesive FRBC materials and the compomer evaluated.

Color Assessment of Feldspathic Ceramic with Two Different Thicknesses, Using Multiple Polymeric Cements.

The purpose of this study was to evaluate the color changes of feldspathic ceramics CEREC Blocs (Dentsply Sirona, Milford, DE, USA) when cemented with different luting agents, while varying the ceramic thickness. Seventy ceramic discs of feldspathic ceramic (A2 shade) were obtained with 0.5 and 0.8 mm thicknesses. Seventy composite discs (A3 shade) 1 mm in thickness were used as substrates. After being polished and conditioned, the ceramic and composite discs were cemented with different resin cements and a flowable composite: Variolink® Esthetic Light, Neutral and Warm (Ivoclar Vivadent, Schaan, Liechtenstein); RelyXTM Veneer B0.5, Translucent and A3 Opaque/yellow shades (3M Oral Care, St. Paul, MN, USA); G-aenial® Universal Flow A2 (GC Europe, Leuven, Belgium). Color difference (ΔE) was determined using a spectrophotometer. A two-way ANOVA and multiple comparisons were performed using the Bonferroni method with a 95% confidence interval. Variolink® Neutral showed the highest ΔE (15.12 ± 0.71) and RelyXTM Veneer A3 the lowest value (1.59 ± 0.33). There are no statistically significant differences between the two ceramic thicknesses for Variolink® Light (p = 0.230) and RelyXTM Veneer B0.5 (p = 0.318) cements. The feldspathic ceramic final color is influenced by the cement used and the ceramic thickness. The use of different cements in a thin ceramic has a clinically significant impact on the final esthetic result.

Effects of nanohybrid flowable resin-based composites on fibroblast viability using different light-curing units.

PURPOSE: To investigate the in vitro cytotoxic effects of Bis-GMA-containing and Bis-GMA-free flowable resin-based composites (RBCs) on primary human gingival fibroblast cells (hGFc) using direct and indirect curing methods and three different light-curing units (LCUs). MATERIALS AND METHODS: Cells were isolated and cultured in vitro in 24-well plates. The plates were divided into treatment (cells with RBC), control (cells only), and blank (media only) groups. In the treatment groups, two types of nanohybrid flowable RBCs were used: Bis-GMA-free and Bis-GMA groups. Each treatment group was subdivided according to the curing method, i.e., direct curing (RBC was injected into the wells and cured directly on the attached cells) and indirect curing (the samples were pre-cured outside of the well plate and then added to the well plate with cells). To vary the LCU, the subgroups were further divided into three groups: multiple-emission peak light-emitting diode, single-emission peak light-emitting diode, and quartz-tungsten-halogen units. Curing was conducted for 20 seconds. The hGFc cytotoxicity was evaluated via 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay after 24, 48, and 72 hours of culturing. RESULTS: The MTT assay results showed that both RBCs were significantly cytotoxic toward hGFc compared to the control group (p < 0.0001). The Bis-GMA group was significantly more cytotoxic to the cells compared to the Bis-GMA-free group. In addition, the curing method and time interval affected cell viability regardless of the LCU used. CONCLUSION: The Bis-GMA flowable RBC and direct curing method had the highest cytotoxic effects on hGFc regardless of the LCU used. Careful selection of flowable RBCs and proper curing techniques are required to decrease the cytotoxic effects on hGFc and improve the clinical handling of oral tissues.

Digital technology for fluid resin injection to close anterior diastema after orthodontic treatment.

Anterior diastema and tooth defects are common clinical issues in restorative dentistry and are often restored by veneers or crowns based on the results of digital smile design and wax-up. Traditional direct resin restoration for closing a diastema is relatively minimally invasive but is time consuming and laborious, and shape control depends on experience. Digital technology can be used to design and transfer the shape of aesthetic restoration more accurately and quickly; thus, it could close anterior diastema and restore defects easily. According to the workflow, this technical process integrates virtual design and practical wax-up, transfers the designed restoration shape by templates, and injects through the preset channel after the template is in place. This clinical technique simplifies the clinical operation and saves clinical time, which can effectively improve the predictability and accuracy of the restoration and reduce technical sensitivity. This digital workflow provides a new technology for closing diastema quickly and effectively.

Construction of a novel rabbit model of ureteral calculi implanted with flowable resin.

BACKGROUND: The purpose of this study was to characterize the pathophysiological changes of hydronephrosis caused by ureteral calculi obstruction in a new rabbit ureteral calculi model by implanting flowable resin. METHODS: Forty New Zealand rabbits were randomly divided into two groups: the calculi group and the sham control group. In the calculi group (n = 20), rabbits were operated at left lower abdomen and the left ureter was exposed. Then flowable resin (flowable restorative dental materials) was injected into the left ureter using a 0.45 mm diameter intravenous infusion needle. Then light-cured for 40 s by means of a dental curing light to form calculi. In the sham control group, normal saline was injected into the ureter. Rabbits underwent X-ray and routine blood and urine tests preoperatively, as well as X-ray, CT, dissection, HE staining and routine blood and urine tests on 1, 3, 5 and 7 days postoperatively. Stone formation was assessed by X-ray and unenhanced CT scan after surgery. The pathophysiological changes were evaluated through dissection, HE staining and routine blood and urine tests. RESULTS: Ureteral calculi models were successfully constructed in 17 rabbits. In calculi group, high-density shadows were observed in the left lower abdomen on postoperative day 1st, 3rd, 5th and 7th by X-ray and CT scan. Dissection found obstruction formation of the left ureters, dilatation of the renal pelvis and upper ureter during 7 days after surgery. The renal long-diameters of the left ureters increased only on the 1st postoperative day. HE staining found ureteral and kidney damage after surgery. In calculi group and sham group,the serum creatinine, urea nitrogen, white blood cells and urine red blood cells were raised at day 1 after surgery. However, the indicators returned to normal at day 3, 5, and 7. CONCLUSIONS: This is a stable, less complicated operation and cost-effective ureteral calculi model by implanting flowable resin. And this novel model may allow us to further understand the pathophysiology changes caused by ureteral calculi obstruction.

Evaluation of Color and Spectral Behavior of a Novel Flowable Resin Composite after Water Aging: An In Vitro Study.

BACKGROUND: This study aimed to evaluate the color matching, light transmittance, and reflectance characteristics of the novel flowable resin composite OCF-001 (OCF). METHODS: Fifty-four resin composite molds were made with simulated class I cavities of A2, A3, and A4 shades by filling the rubber mold interspace with Estelite Sigma Quick (ESQ), Gracefil Putty (GP) and Filtek Supremme Ultra (FSU). After applying the adhesive, three different flowable resin composites (n = 6), OCF, Gracefil LoFlo (GLF), and Supreme Ultra Flowable (SUF), were used to fill the cavities. A colorimeter was used to measure the color parameters (CIEDE2000). The color measurements were taken immediately and after 28 days. Data were analyzed using the nonparametric Kruskal-Wallis (α = 0.05) and Wilcoxon tests. The light transmittance and reflection characteristics were measured with a black background using a spectrophotometer under D65 illumination. RESULTS: The ΔE00, and ΔC of OCF was lower than other tested materials in A2 and A3 shades both immediately and after 28 days. OCF showed the highest transmittance characteristic, and a relatively stable reflectance curve in all the wavelengths. CONCLUSIONS: OCF showed better shade matching with the surrounding shades of A2 and A3, a relative uniform reflectance and higher light transmission properties.

Eight-year clinical evaluation of two types of resin composite in non-carious cervical lesions.

OBJECTIVES: In this clinical study, the 8-year clinical performances of a flowable resin composite was compared with that of a conventional resin composite. MATERIALS AND METHODS: Ninety non-carious cervical lesions (NCCLs) in 19 participants were involved in this trial. NCCLs were restored with a flowable composite (Clearfil Flow FX: FX, Kuraray Noritake, Japan) or a conventional resin composite (Clearfil AP-X: AP) in conjunction with a one-step self-etch adhesive (Clearfil S3 Bond). Each participant had both types of resin composite restorations that were randomly allocated. The restorations were evaluated at baseline and annually up to 8 years using modified USPHS criteria. The data were statistically analyzed using the Fisher's exact test, Kaplan-Meier method, and a multivariate Cox-regression with frailty models (p < 0.05). RESULTS: The 8-year participant recall rate was 95%. One hundred percent retention was recorded for AP, whereas four out of 46 restorations were lost for FX during the 8 years. The incidence of marginal staining increased over time regardless of the type of resin composite, showing 48% for AP and 57% for FX after 8 years. Wear of the resin composite occurred only for the flowable material and there was a significant difference between the types of resin composite (p = 0.024). Overall survival rates at 8 years for AP and FX were 98% and 82% respectively (p = 0.110). CONCLUSIONS: The flowable resin composite presented lower wear resistance and showed a lower survival rate compared with the conventional composite after eight years of clinical service. CLINICAL RELEVANCE: Flowable resin composites may show greater wear after long-term clinical service. TRIAL REGISTRATION NUMBER: UMIN000028745, Date of registration: August 19, 2017.

Toothbrush Abrasion of Restorations Fabricated with Flowable Resin Composites with Different Viscosities In Vitro.

The purpose of this study was to examine toothbrush-induced abrasion of resin composite restorations fabricated with flowable resin composites of different viscosities in vitro. In this study, six types of flowable resin composites with different flowability (Beautifil Flow F02, F02; Beautifil Flow F10, F10; Beautifil Flow Plus F00, P00; Beautifil Flow Plus F03, P03; Beautifil Flow Plus X F00, X00; and Beautifil Flow Plus X F03, X03) were used. For the toothbrush abrasion test, the standard cavity (4 mm in diameter and 2 mm in depth) formed on the ceramic block was filled with each flowable resin composite (n = 10) and brushed for up to 40,000 strokes in a suspension containing commercial toothpaste under the conditions of 500 g load, 60 strokes/min, and 30 mm stroke distance. After every 10,000 strokes, the brushed surface of the specimen was impressed with a silicone rubber material. The amount of toothbrush-induced abrasion observed on each impression of the specimen was measured using a wide-area 3D measurement device (n = 10). The viscosity was determined using a cone-and-plate rotational measurement system. Because of the effect of different shear rates on viscosity and clinical use, the values 1.0 and 2.0 s-1 were adopted as data (n = 6). In this study, the results of the toothbrush abrasion test demonstrated no significant differences in the amount of toothbrush-induced abrasion among flowable resin composites used (p > 0.05). No significant correlation was reported between toothbrush-induced abrasion and viscosities of flowable resin composites.

Use of flowable resin composite as an intermediate layer in class II restorations: a systematic review and meta-analysis.

OBJECTIVE: To investigate the influence of an intermediate layer of a flowable resin composite in class II resin composite restorations. MATERIALS AND METHODS: The authors searched MEDLINE via PubMed, Scopus, LILACS, Embase, and Web of Science electronic databases, and the ClinicalTrials.gov website to identify laboratory and clinical studies that evaluated class II cavities with resin composite restorations with or without an intermediate layer of flowable resin composite. Two authors independently selected the studies, extracted the data, and assessed the risk of bias and the quality of the evidence. Meta-analyses were performed using RevMan5.3 with fixed-effects model comparing bond strength (MPa), fracture strength (Newton), and clinical (number of failures) outcomes between restorative techniques (with or without flowable resin composite as an intermediate layer). RESULTS: From 1707 potentially eligible studies, 140 in vitro studies and 14 clinical studies were selected for full-text analysis, and 11 were included in the systematic review, being 7 in vitro and 4 clinical studies. There was no statistically significant difference between the restorative techniques considering the outcomes evaluated. The heterogeneity found was null. The risk of bias was classified as medium for in vitro studies and unclear in most clinical studies. The quality of the evidence of the clinical studies was low. CONCLUSION: The use of flowable resin composite as an intermediate layer does not improve the effectiveness of the class II restorations based on laboratory and clinical outcomes. CLINICAL RELEVANCE: Flowable resin composite as an intermediate layer may be used for class II restorations; however, this technique does not improve the effectiveness of the class II restorations.

Dentin bond strengths of all-in-one adhesives combined with different manufacturers' flowable resin composites.

The present study aimed to evaluate the dentin bond strengths of all-in-one adhesives in combination with flowable-resin-composites of different manufacturers. The materials used in this study were two all-in-one adhesives (BeautiBond Multi, BM, and Clearfil Bond SE ONE, SE) and four flowable resin composites (Clearfil Majesty ES Flow, CME; Estelite Flow Quick, EFQ; MI Flow II, MIF; and Beautifil Flow Plus F03, BFP). By combining each all-in-one adhesive and flowable resin composite, eight experimental groups were established. The shear bond strengths (SBSs) in each group were measured, and the data were statistically analyzed using one-way analysis of variance. The SBSs of the group that used SE showed no significant differences among all flowable resin composites (p>0.05), whereas those of the group that used BM showed significant differences between BFP and CME, and CME and EFQ. The combinations showed dentin bond strength ranging approximately from 20 to 30 MPa.

The injectable resin composite restorative technique: A case report.

OBJECTIVE: To describe the use of the injectable resin composite restorative technique with a flowable resin material, in a clinical case with esthetic problems associated with irregular tooth anatomies, allied with a finishing, and polishing protocol due to staining after 1 year of use. CLINICAL CONSIDERATIONS: The presented case report helped to achieve an immediate highly esthetic restoration with appropriate width proportions based on a previous wax-up. After 1 year of use, restorations presented staining; therefore, finishing and polishing procedures were required to re-achieve acceptable esthetic results and thus increase restoration's survival. CONCLUSIONS: The use of the presented technique allowed to obtain a simple and predictable workflow; however, care must be taken on the follow up of the restorations due to intrinsic characteristics of the flowable resin material. CLINICAL SIGNIFICANCE: The use of the presented injectable technique helped on obtaining a precise anatomy replicating a diagnostic wax-up, thus improving marginal precision and achieving a highly esthetic and functional immediate outcome, with an easy workflow when appropriately planned and executed. However, it also presented low color stability after 1 year of use only, thus, requiring attention from clinicians in regard to its maintenance over time.

The effect of different light curing units on Vickers microhardness and degree of conversion of flowable resin composites.

This study aimed to assess the influence of different light curing units (LCUs) on the polymerization of various flowable resin composites. Three LCUs (Optilux 501, Elipar™ DeepCure-L LED and Bluephase®20i) and eight flowable resin composites: MI FIL Flow, Estelite Flow Quick, Estelite Universal Flow (medium), Estelite Universal Flow (super low), Beautifil Flow Plus, Clearfil Majesty ES Flow, Filtek Supreme Ultra flowable and TetricEvo Flow were tested. For Vickers microhardness (VHN) test and degree of conversion (DC), specimens were prepared and polymerized for 20 s. VHN test was performed at top surfaces (3 indentations) and DC for each specimen was measured using Fourier transform infrared (FT-IR) spectroscopy after 24 h dry storage in dark at 37˚C. The data were analyzed with 2-way ANOVA and t-test with Bonferroni correction. DC and hardness values showed a relationship between materials and LCUs. The curing efficacy of LCU type may depend on the material composition.

Evaluation of structural coloration of experimental flowable resin composites.

OBJECTIVE: To examine the effect of filler contentTo examine the effect of filler content on structural coloration of experimental flowable resin composites. OVERVIEW: Experimental composites containing spherical fillers and different filler contents (30, 40, 50, 60 and 70 wt%), a structural colored resin composite (Omnichroma), and a nanohybrid flowable resin composite (Gracefil LoFlo) were used. The optical characteristics of the specimens were measured on standard black and white backgrounds using a spectrophotometer under CIE D65 illuminant and the L*a*b* values were determined. The color matching abilities to artificial teeth were evaluated using the ΔE*ab and ΔE00 color difference formulas. One-way analysis of variance and Tukey's post hoc test were used. The spectral reflectance of experimental composites showed different trends in different backgrounds, plate thickness, and filler contents. In particular, higher spectral reflectance was observed on the white background at wavelengths ranging from 450 to 700 nm in both 1.5 and 3.0 mm plates when compared to the black background. The percent reflectivity tended to decrease with a decrease of the filler contents. The color matching abilities of the experimental composites improved with the increase in the filler contents. CONCLUSIONS: Structural coloration of the flowable resin composites were affected by the filler contents. CLINICAL SIGNIFICANCE: Clinical Significance: Higher filler contents might be needed to achieve the optimal color properties of structural colored flowable resin composites, thereby improving the restoration esthetics.

Development of a Bioactive Flowable Resin Composite Containing a Zinc-Doped Phosphate-Based Glass.

Flowable resins used for dental restoration are subject to biofilm formation. Zinc has antibacterial properties. Thus, we prepared a zinc-doped phosphate-based glass (Zn-PBG) to dope a flowable resin and evaluated the antibacterial activity of the composite against Streptococcus mutans (S. mutans) to extrapolate the preventative effect toward secondary caries. The composites were prepared having 0 (control), 1.9, 3.8, and 5.4 wt.% Zn-PBG. The flexural strength, elastic modulus, microhardness, depth of cure, ion release, inhibition zone size, and number of colony-forming units were evaluated and analyzed using ANOVA. The flexural strength of the control was significantly higher than those of Zn-PBG samples (p < 0.05). However, all samples meet the International Standard, ISO 4049. The microhardness was not significantly different for the control group and 1.9 and 3.8 wt.% groups, but the 5.4 wt.% Zn-PBG group had a significantly lower microhardness (p < 0.05). Further, the composite resins increasingly released P, Ca, Na, and Zn ions with an increase in Zn-PBG content (p < 0.05). The colony-forming unit count revealed a significant reduction in S. mutans viability (p < 0.05) with increase in Zn-PBG content. Therefore, the addition of Zn-PBG to flowable composite resins enhances antibacterial activity and could aid the prevention of secondary caries.

Solving color irregularities with a bioactive bulk-fill restorative system: case report and 24-months follow up / Resolución de irregularidades de color con un sistema restaurador bulk-fill bioactivo: reporte de caso y seguimiento de 24 meses

Bulk-fill resin composites represent an excellent alternative to the conventional incremental layering technique for the reduction of polymerization stress on the adhesive interface. Marginal seal can be further improved by the incorporation of bioactive fillers, such as those encountered in Giomers. However, the high translucency required for the adequate polymerization of bulk-fill materials can seriously jeopardize the final aesthetic outcome of the restorations, especially in the presence of inhomogeneous or stained dentin substrates. The aim of this case report was to present the combined use of two bulk-fill Giomer materials (Beautifil Bulk Flowable and Beautifil II LS, Shofu) for the restoration of three posterior maxillary teeth displaying a black stained dentin substrate due to amalgam corrosion products. This technique allowed completion of the restorations with a satisfactory aesthetic and biomimetic outcome. The adequate preservation of the anatomy and function of the three restorations after 24-months follow-up, provides evidence of the enhanced marginal sealing capacity of these bioactive materials and the success of bulk-fill techniques over time.

Las resinas compuestas de tipo bulk-fill representan una excelente alternativa a la técnica incremental para la reducción de la tensión de polimerización sobre la interfaz adhesiva. La incorporación de rellenos bioactivos, como los que se encuentran en los materiales con tecnología giomer, refuerzan aún más el sellado marginal de estas restauraciones. Sin embargo, la alta translucidez, necesaria para la adecuada polimerización de los materiales tipo bulk-fill, puede comprometer seriamente el resultado estético final de las restauraciones, especialmente en presencia de sustratos dentarios no homogéneos u oscurecidos. El objetivo de este reporte de caso fue presentar el uso combinado de dos materiales giomer tipo bulk-fill (Beautifil Bulk Flowable y Beautifil II LS, Shofu) para la restauración de tres dientes maxilares posteriores con un sustrato dentinario ennegrecido debido a productos de corrosión de amalgama. Esta técnica permitió completar las restauraciones con un resultado estético y biomimético satisfactorio. La adecuada conservación de la anatomía y la función de las tres restauraciones tras un período de 24 meses, aporta evidencia sobre la adecuada capacidad de sellado marginal de estos materiales bioactivos y el éxito de las técnicas de restauración tipo bulk-fill en el tiempo.