Influence of photothermal nanomaterials localization within the electrospun membrane structure on purification of saline oily wastewater based on photothermal vacuum membrane distillation.

Today, synergistic combination of special nanomaterials (NMs) and electrospinning technique has emerged as a promising strategy to address both water scarcity and energy concerns through the development of photothermal membranes for wastewater purification and desalination. This work was organized to provide a new perspective on membrane design for photothermal vacuum membrane distillation (PVMD) through optimizing membrane performance by varying the localization of photothermal NMs. Poly(vinylidene fluoride) omniphobic photothermal membranes were prepared by localizing graphene oxide nanosheets (GO NSh) (1) on the surface (0.2 wt%), (2) within the nanofibers structure (10 wt%) or (3) in both positions. Considering the case 1, after 7 min exposure to the 1 sun intensity light, the highest temperature (∼93.5 °C) was recorded, which is assigned to the accessibility of GO NSh upon light exposure. The case 3 yielded to a small reduction in surface temperature (∼90.4 °C) compared to the case 1, indicating no need to localize NMs within the nanofibers structure when they are localized on the surface. The other extreme belonged to the case 2 with the lowest temperature of ∼71.3 °C, which is consistent with the less accessibility of GO NSh during irradiation. It was demonstrated that the accessibility of photothermal NMs plays more pronounced role in the membrane surface temperature compared to the light trapping. However, benefiting from higher surface temperature during PVMD due to enhanced accessibility of photothermal NMs is balanced out by decrease in the permeate flux (case 1: 1.51 kg/m2 h and case 2: 1.83 kg/m2 h) due to blocking some membrane surface pores by the binder. A trend similar to that for flux was also followed by the efficiency. Additionally, no change in rejection was observed for different GO NSh localizations.

Anisotropy Dependence of Material Deformation Mechanisms in Nanoscratching Monocrystalline BaF2: Experiments and Atomic Simulations.

Monocrystalline barium fluoride (BaF2), known for its exceptional optical properties in the infrared spectrum, exhibits anisotropy that influences surface quality and material removal efficiency during ultraprecision machining. This research explores the impact of anisotropy on the deformation and removal mechanisms of monocrystalline BaF2 by integrating nanoscratch tests with molecular dynamics (MD) simulations. Nanoscratch tests conducted on variously oriented monocrystalline BaF2 surfaces using a ramp loading mode facilitated the identification of surface cracks and a systematic description of material removal behaviors. This study elucidates the effect of crystal orientation on the ductile-brittle transition (DBT) of monocrystalline BaF2, further developing a critical depth prediction model for DBT on the (111) crystal plane to reveal the underlying anisotropy mechanisms. Moreover, nanofriction and wear behaviors in monocrystalline BaF2 are found to be predominantly influenced by scratch direction, crystal surface, and applied load, with the (110) and (100) planes showing pronounced frictional and wear anisotropy. A coefficient of friction model, accounting for the material's elastic recovery, establishes the intrinsic relationship between anisotropic friction and wear behaviors, the size effect, and scratch direction. Lastly, MD modeling of nanoscratched monocrystalline BaF2 reveals the diversity of dislocations and strain distributions along the (111) [-110] and [-1-12] crystal directions, offering atomic scale insights into the origins of BaF2 anisotropy. Thus, this study provides a theoretical foundation for the efficient processing of fluorine-based infrared optic materials exhibiting anisotropy.

Experimental and DFT calculation study on the efficient removal of high fluoride wastewater from metallurgical wastewater by kaolinite.

Fluoride pollution and water scarcity are urgent issues. Reducing fluoride concentration in water is crucial. Kaolinite has been used to study adsorption and fluoride removal in water and to characterize material properties. The experimental results showed that the adsorption capacity of kaolinite decreased with increasing pH. The highest adsorption of fluoride occurred at pH 2, with a capacity of 11.1 mg/g. The fluoride removal efficiency remained high after four regeneration cycles. The fitting results with the Freundlich isotherm model and the external diffusion model showed that the non-homogeneous adsorption of kaolinite fit the adsorption behavior better. Finally, the adsorption mechanism was analyzed by FT-IR and XPS. The binding energies of various adsorption sites and the chemical adsorption properties of atomic states were discussed in relation to DFT calculations. The results showed that Al and H sites were the main binding sites, and the bonding stability for different forms of fluoride varies, with the size of Al-F (-7.498 eV) > H-F (-6.04 eV) > H-HF (-3.439 eV) > Al-HF (-3.283 eV). Furthermore, the density of states and Mulliken charge distribution revealed that the 2p orbital of F was found to be active in the adsorption process and was the main orbital for charge transfer.

Association between fluoride exposure and psychiatric disorders in adults.

To explore the association between fluoride exposure and depression / anxiety in adults, the 1,169 participants were recruited. The demographic information of participants was obtained through questionnaire survey and physical measurements. Morning urine samples were collected, and urinary fluoride (UF) level was determined. Changes in depression and anxiety levels were evaluated using the Patient Health Questionnaire-2 and General Anxiety Disorder-2 scales. The association between psychiatric disorders and UF levels was analyzed. In the total population, the prevalence of depression and anxiety were 3.17% and 4.19%, respectively. These results showed no significant association between depression / anxiety scale scores and UF levels. Logistic regression suggested no significant association between depression / anxiety levels, and UF levels, but there was an interaction between UF and income on depression. Our findings highlighted the interaction between fluoride exposure and monthly income, which may affect depression in adults.

Organochlorine pesticide residues and urinary arsenic and fluoride levels in mothers and their newborns who are residents of rural areas in Durango State, Mexico.

Maternal and prenatal exposure to organochlorine pesticides (OCP), arsenic (As), and fluoride (F-) is a critical public health concern. The present study assessed serum OCP residues and urinary As and F- levels in mother and newborn pairs who are residents of rural areas of Durango State, Mexico, from August 2018 to February 2019. Levels of OCP, As, and F- were measured in serum and urine samples by Gas chromatography - Tandem mass spectrometry (GC - MS/MS), Hydride generation - Atomic fluorescent spectrometry (HG-AFS, and ion-selective electron analysis (ISE), respectively, in 60 binomial mothers - newborns. Dieldrin, endrin aldehyde, and endosulfan-II were significantly higher in newborns than in mothers (p ˂0.05). Meanwhile, no significant differences were observed for As and F- concentrations between mother - newborn pairs. Differences were observed in ∑Dienes and ∑DDTs comparing newborns with normal and low birth weights and a positive relationship in Æ©Dienes, Æ©Chlordanes, and Æ©DDTs between mother and newborn pairs (p ˂ 0.05). These findings highlight the importance of extensive research regarding the influence of pollution.

Examining the association between untreated caries in children and parent fluoride treatment refusal.

BACKGROUND: In this case-control study, the authors examined the relationship between untreated caries in children and parent fluoride treatment refusal. The authors hypothesized that parents of children with a history of untreated caries would be less likely to refuse topical fluoride for their children than parents of children with no history of untreated caries. METHODS: The study included children (≤ 18 years old) who were patients at a university dental clinic from January 2016 through June 2020. Children whose parents refused fluoride treatment were age-matched with children whose parents did not refuse fluoride treatment (n = 356). The outcome variable was parent topical fluoride refusal for their children (no, yes). The predictor variable was a history of untreated caries (no, yes). Confounding variable-adjusted modified Poisson regression models were used to estimate the prevalence ratio of parent fluoride refusal by means of children's untreated caries status. RESULTS: Approximately 46.3% of children had a history of untreated caries. The prevalence of parent fluoride refusal for children with a history of untreated caries was significantly lower than that for children with no history of untreated caries (adjusted prevalence ratio, 0.79; 95% CI, 0.63 to 0.98; P = .03). CONCLUSIONS: Parents of children with a history of caries are less likely to refuse topical fluoride treatment, which suggests that untreated caries may motivate parents to accept preventive dental treatments like fluoride. PRACTICAL IMPLICATIONS: Dental care professionals should assess caries risk and communicate a child's caries risk before making a recommendation regarding topical fluoride treatment.

Antibacterial, Antibiofilm, and Tooth Color Preservation Capacity of Magnesium Oxide Nanoparticles Varnish (in vitro Study).

Purpose: Antibacterial and antibiofilm properties of magnesium oxide nanoparticles (MgONPs) mixture assessed against Streptococcus mutans (S. mutans), in addition to examining MgONPs varnish impact on the preservation of the tooth color and inhibition of methylene blue diffusion to the enamel. Methods: MgONPs mixture was prepared in deionized water (DW), absolute ethanol (E), and rosin with ethanol (RE), named varnish. The antibacterial and antibiofilm capacities of MgONPs mixtures were tested by agar well diffusion, colony-forming unit (CFU), and biofilm inhibition microtiter methods in triplicate and compared to sodium fluoride varnish (NaF) and chlorhexidine mouthwash (ChX). A spectrophotometer was used to record basic tooth color. The artificial demineralization was initiated for 96 h. Then, experimental materials were applied to the corresponding group, and 10-day pH cycles proceeded. Then, the color was recorded in the same ambient environment. The methylene blue diffusion was evaluated by staining the samples for 24 h. After that, the diffusion test was calculated by a digital camera attached to the stereomicroscope. Results: The agar well diffusion test expressed a significant inhibition zone with all MgONPs mixtures (p = 0.000), and maximum inhibition zone diameter associated with MgONPs-RE. The same finding was observed in the CFU test. Additionally, 2.5%, 5%, and 10% MgONPs-RE varnish showed strong biofilm inhibition capacity (p = 0.039) compared to NaF and ChX groups that inhibit biofilm formation moderately (p = 0.003). The study shows that the 5% MgONPs-RE varnish maintains basic tooth color with minimal methylene blue diffusion compared to NaF varnish (p = 0.00). Conclusion: Evaluating MgONPs as a mixture revealed antibacterial and antibiofilm capacity against S. mutans with a higher effect of MgONPs-RE varnish. Also, examining the topical effect of MgONPs-RE varnish on the preservation of the tooth color after pH cycle challenges and methylene blue diffusion to enamel confirmed the high performance of MgONPs-RE varnish at 5%.

High-Performance Pomegranate-Like CuF2 Cathode Derived from Spent Lithium-Ion Batteries.

With the large-scale application of lithium-ion batteries (LIBs), a huge amount of spent LIBs will be generated each year and how to realize their recycling and reuse in a clean and effective way poses a challenge to the society. In this work, using the electrolyte of spent LIBs as solvent, we in-situ fluorinate the conductive three-dimensional porous copper foam by a facile solvent-thermal method and then coating it with a cross-linked sodium alginate (SA) layer. Benefiting from the solid-electrolyte interphase (SEI) that accommodating the volume change of internal CuF2 core and SA layer that inhibiting the dissolution of CuF2, the synthesized CuF2@void@SEI@SA cathode with a pomegranate-like structure (yolk-shell) exhibits a large reversible capacity of ~535 mAh g-1 at 0.05 A g-1 and superb cycling stability. This work conforms to the development concept of green environmental protection and comprehensively realizes the unity of environmental, social and economic benefits.

Insight into Fluoride Additives to Enhance Ammonia Production from Lithium-Mediated Electrochemical Nitrogen Reduction Reaction.

Demands for green ammonia production increase due to its application as a proton carrier, and recent achievements in electrochemical Li-mediated nitrogen reduction reactions (Li-NRRs) show promising reliability. Here, it is demonstrated that F-containing additives in the electrolyte improve ammonia production by modulating the solid electrolyte interphase (SEI). It is suggested that the anionic additives with low lowest unoccupied molecular orbital levels enhance efficiency by contributing to the formation of a conductive SEI incorporated with LiF. Specifically, as little as 0.3 wt.% of BF4 - additive to the electrolyte, the Faradaic efficiency (FE) for ammonia production is enhanced by over 15% compared to an additive-free electrolyte, achieving a high yield of 161 ± 3 nmol s-1 cm-2. The BF4 - additive exhibits advantages, with decreased overpotential and improved FE, compared to its use as the bulk electrolyte. The observation of the Li3N upper layer implies that active Li-NRR catalytic cycles are occurring on the outermost SEI, and density functional theory simulations propose that an SEI incorporated with LiF facilitates energy profiles for the protonation by adjusting the binding energies of the intermediates compared to bare copper. This study unlocks the potential of additives and offers insights into the SEIs for efficient Li-NRRs.

Integrating deep learning and regression models for accurate prediction of groundwater fluoride contamination in old city in Bitlis province, Eastern Anatolia Region, Türkiye.

Groundwater resources in Bitlis province and its surroundings in Türkiye's Eastern Anatolia Region are pivotal for drinking water, yet they face a significant threat from fluoride contamination, compounded by the region's volcanic rock structure. To address this concern, fluoride levels were meticulously measured at 30 points in June 2019 dry period and September 2019 rainy period. Despite the accuracy of present measurement techniques, their time-consuming nature renders them economically unviable. Therefore, this study aims to assess the distribution of probable geogenic contamination of groundwater and develop a robust prediction model by analyzing the relationship between predictive variables and target contaminants. In this pursuit, various machine learning techniques and regression models, including Linear Regression, Random Forest, Decision Tree, K-Neighbors, and XGBoost, as well as deep learning models such as ANN, DNN, CNN, and LSTM, were employed. Elements such as aluminum (Al), boron (B), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), phosphorus (Pb), lead (Pb), and zinc (Zn) were utilized as features to predict fluoride levels. The SelectKbest feature selection method was used to improve the accuracy of the prediction model. This method identifies important features in the dataset for different values of k and increases model efficiency. The models were able to produce more accurate predictions by selecting the most important variables. The findings highlight the superior performance of the XGBoost regressor and CNN in predicting groundwater quality, with XGBoost consistently outperforming other models, exhibiting the lowest values for evaluation metrics like mean squared error (MSE), mean absolute error (MAE), and root mean squared error (RMSE) across different k values. For instance, when considering all features, XGBoost attained an MSE of 0.07, an MAE of 0.22, an RMSE of 0.27, a MAPE of 9.25%, and an NSE of 0.75. Conversely, the Decision Tree regressor consistently displayed inferior performance, with its maximum MSE reaching 0.11 (k = 5) and maximum RMSE of 0.33 (k = 5). Furthermore, feature selection analysis revealed the consistent significance of boron (B) and cadmium (Cd) across all datasets, underscoring their pivotal roles in groundwater contamination. Notably, in the machine learning framework evaluation, the XGBoost regressor excelled in modeling both the "all" and "rainy season" datasets, while the convolutional neural network (CNN) outperformed in the "dry season" dataset. This study emphasizes the potential of XGBoost regressor and CNN for accurate groundwater quality prediction and recommends their utilization, while acknowledging the limitations of the Decision Tree Regressor.

Synthesis of aminopropyl triethoxysilane/melamine incorporated superhydrophilic membranes for simultaneous removal of oil, metals, and Salt ions from produced water.

Water treatment has turned out to be more important in most societies due to the expansion of most economies and to advancement of industrialization. Developing efficient materials and technologies for water treatment is of high interest. Thin film nanocomposite membranes are regarded as the most effective membranes available for salts, hydrocarbon, and environmental pollutants removal. These membranes improve productivity while using less energy than conventional asymmetric membranes. Here, the polyvinylidene fluoride (PVDF) membranes have been successfully modified via dip single-step coating by silica-aminopropyl triethoxysilane/trimesic acid/melamine nanocomposite (Si-APTES-TA-MM). The developed membranes were evaluated for separating the emulsified oil/water mixture, the surface wettability of the membrane materials is therefore essential. During the conditioning step, that is when the freshwater was introduced, the prepared membrane reached a flux of about 27.77 L m-2 h-1. However, when the contaminated water was introduced, the flux reached 18 L m-2 h-1, alongside an applied pressure of 400 kPa. Interestingly, during the first 8 h of the filtration test, the membrane showed 90 % rejection for ions including Mg2+, and SO42- and ≈100 % for organic pollutants including pentane, isooctane, toluene, and hexadecane. Also, the membrane showed 98 % rejection for heavy metals including strontium, lead, and cobalt ions. As per the results, the membrane could be recommended as a promising candidate to be used for a mixture of salt ions, hydrocarbons, and mixtures of heavy metals from wastewater.

Defluoridation by positive single-pulse current electrocoagulation from photovoltaic wastewater: Energy consumption assessment and mechanism analysis.

The presence of fluoride ions (F-) in photovoltaic (PV) wastewater significantly affects the integrity of the ecological environment. In contrast to direct current electrocoagulation (DC-EC), positive single-pulse electrocoagulation (PSPC-EC) shows a significant reduction in both the formation of passivation films on electrodes and the consumption of electrical energy. Under the experimental conditions of an Al-Al-Al-Al electrode combination, an electrode spacing of 1.0 cm, a NaCl concentration of 0.05 mol L-1, an initial pH of 5.6, an initial F- concentration of 5 mg L-1, a current density of 5 A m-2, a pulse frequency of 500 Hz, and a 40 % duty cycle, the achieved equilibrium F- removal efficiencies were 84.0 % for DC-EC and 88.0 % for PSPC-EC, respectively, accompanied by power consumption of 0.0198 kWh·mg-1 and 0.0073 kWh·mg-1. The flocs produced in the PSPC-EC process were characterized using scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy and it is revealed that the F- removal mechanisms in the PSPC-EC process include co-precipitation, hydrogen bond complexation, and ion exchange. When the actual PV wastewater was finally subjected to treatment under the optimal PSPC-EC conditions, the F- concentration in the wastewater was reduced from 4.6 mg L-1 to 1.4 mg L-1. This paper provides both a theoretical framework and a technological basis for the application of PSPC-EC in the advanced treatment of PV wastewater.

The combination of arginine and fluoride-containing bioactive glass acted synergistically in inhibiting enamel demineralization in permanent teeth.

OBJECTIVES: To evaluate the in-vitro efficacy of inhibiting enamel demineralization using arginine in combination with fluoride-containing bioactive glass (FBG). METHODS: In this study, the healthy enamel blocks were first demineralized in acetic acid for 24h, then soaked in anti-demineralization treatment solutions containing either arginine or FBG or both for 96h.The specimens treated in acetic acid were applied as the control group. The pH, calcium and phosphorus ion concentrations of the solutions were measured before and after treatment. Changes in enamel mineral weight, microhardness, and composition were also analyzed. RESULTS: The present of arginine facilitated fluorine release from treatment solutions with the presence of FBG. Both arginine and FBG significantly increased the pH of treatment solutions and prevented the further mineral weight loss compared to the control group. All anti-demineralization treatment groups showed significant increases in microhardness, but there was no statistical difference among the treatment groups. The SEM analysis showed enamel restoration in the arginine and FBG groups upon treatment, while the combined groups showing a superior anti-demineralization efficacy. 19F NMR showed the formation of fluorapatite in samples treated with solutions containing FBG. CONCLUSIONS: Both arginine and FBG could inhibit enamel demineralization to some extent, and their combination demonstrated an enhanced anti-demineralization efficacy. The low-concentration combination group exhibited anti-demineralization effects comparable to those of high-concentration ones. CLINICAL SIGNIFICANCE: This study introduces a new approach for caries prevention by combining the application of arginine and FBG. The release of fluorine promoted by the presented arginine along with calcium and phosphorus ions from FBG facilitated FAP formation. Additionally, the increment of pH resulting from arginine and FBG degradation further prevents enamel demineralization.

Effect of silver diamine fluoride combined with photodynamic therapy on primary enamel microhardness.

OBJECTIVES: This study aimed to assess the effect of silver diamine fluoride (SDF) combined with photodynamic therapy (PDT) on primary enamel microhardness. MATERIALS AND METHODS: This in vitro, experimental study was conducted on 40 extracted primary molars with sound buccal/lingual surfaces. The baseline enamel microhardness of the teeth was initially measured by a Vickers hardness tester. Next, the teeth were randomly assigned to four groups (n=10) for treatment with SDF, PDT, SDF plus PDT, and control (no intervention). After the intervention, the teeth underwent a 14-day pH-cycling, and enamel microhardness was measured again. The change in microhardness was calculated for each group, and comparisons were made by two-way ANOVA and t-test (alpha=0.05). RESULTS: The mean secondary microhardness of the three intervention groups was significantly higher than that of the control group (P<0.05). Despite slightly higher microhardness in SDF + PDT group, followed by the SDF group, the difference in secondary microhardness was not significant among the three intervention groups (P>0.05). CONCLUSION: Treatment of primary enamel with SDF or PDT can increase its microhardness and enhance remineralization. However, combined use of SDF and PDT had no additional advantage over the use of SDF alone.

Underlying Mechanism of Fluoride Inhibits Colonic Gland Cells Proliferation by Inducing an Inflammation Response.

The integrity of colonic gland cells is a prerequisite for normal colonic function and maintenance. To evaluate the underlying injury mechanisms in colonic gland cells induced by excessive fluoride (F), forty-eight female Kunming mice were randomly allocated into four groups and treated with different concentrations of NaF (0, 25, 50, and 100 mg F-/L) for 70 days. As a result, the integrity of the colonic mucosa and the cell layer was seriously damaged after F treatment, as manifested by atrophy of the colonic glands, colonic cell surface collapse, breakage of microvilli, and mitochondrial vacuolization. Alcian blue and periodic acid Schiff staining revealed that F decreased the number of goblet cells and glycoprotein secretion. Furthermore, F increased the protein expression of TLR4, NF-κB, and ERK1/2 and decreased IL-6, interfered with NF-κB signaling, following induced colonic gland cells inflammation. The accumulation of F inhibited proliferation via the JAK/STAT signaling pathway, as characterized by decreased mRNA and protein expression of JAK, STAT3, STAT5, PCNA, and Ki67 in colon tissue. Additionally, the expression of CDK4 was up-regulated by increased F concentration. In conclusion, excessive F triggered colonic inflammation and inhibited colonic gland cell proliferation via regulation of the NF-κB and JAK/STAT signaling pathways, leading to histopathology and barrier damage in the colon. The results explain the damaging effect of the F-induced inflammatory response on the colon from the perspective of cell proliferation and provide a new idea for explaining the potential mechanism of F-induced intestinal damage.

Stannous fluoride forms aggregates between outer and inner membranes leading to membrane rupture of Porphyromonas gingivalis and Prevotella pallens.

Objective: Stannous has been shown to bind to free lipopolysaccharides, thus preventing them from binding to TLR receptors. This study was undertaken to determine the histomorphological mechanism of stannous binding to anaerobic bacteria. Methods: Two bacteria associated with gingivitis and advanced periodontal disease, Porphyromonas gingivalis (P. gingivalis) and Prevotella pallens (P. pallens), were cultured in 25-1,000 µM of stannous fluoride and stannous chloride for 48 h. The growth rate was estimated using absorbance OD600. Bacterial cells were then fixed and processed for transmission electron microscopy (TEM) analysis. Results: Stannous fluoride inhibited proliferation of both P. gingivalis and P. pallens in a dose-dependent manner. There was a statistically significant suppression of the growth curve starting at 100 µM for P. pallens (P = 0.050) and 200 µM for P. gingivalis (P = 0.039). TEM analysis revealed a thick layer of polysaccharides (19.8 nm) in P. gingivalis. The outer and inner membranes were clearly visible with low electron densities in both bacteria. Stannous diffused into bacterial membranes and formed precipitates in the areas spanning outer and inner membranes and below inner membranes. Precipitates varied in size ranging from 46.4 to 84.5 nm in length, and 18.4 to 35.9 nm in width. The membranes were disintegrated in the region where stannous formed precipitates. Cytosolic contents were leaked out, and in several cases, small vesicles were formed. Stannous precipitates were more abundant in numbers and larger in size in bacteria treated with high concentrations (100-300 µM) than in low concentrations (25-50 µM) of stannous fluoride. Furthermore, most of the bacteria were disintegrated in the groups treated with 100-300 µM stannous fluoride. At low concentrations (25 µM), stannous fluoride formed complexes primarily around outer membranes, to which lipopolysaccharides are anchored. Stannous chloride results showed similar trends, but it was less potent than stannous fluoride. Conclusion: Stannous fluoride can penetrate bacteria, bind to the constituents of the membrane and form precipitates between outer and inner membranes and beneath inner membranes. These large precipitates damaged the integrity of membranes and allowed cytosolic contents to be leaked out. Stannous complexes formed at the outer membranes, even at low concentrations (25 µM).

High Performance Piezoelectric Nanogenerators Based on Polyvinylidene Fluoride-Graphene Nanoribbon Composite Thin Films.

In this study, a highly efficient, sensitive, and lightweight piezoelectric nanogenerator (PENG) is developed using graphene nanoribbons (GNRs) incorporated into the polyvinylidene fluoride (PVDF) matrix. Unzipping multi-walled carbon nanotubes is an effective and scalable strategy for synthesizing graphene nanoribbons. The synthesized GNRs are employed to prepare nanometer-scale piezoelectric polymer composite films showing higher piezoelectric performance than neat PVDF. The impact of GNR concentration in the PVDF matrix on the electroactive phase content and piezoelectric properties of the composites is systematically investigated. X-ray diffraction (XRD) and Fourier-transformed infrared spectroscopy (FT-IR) analysis demonstrate an increase in the electroactive ß and γ phases of PVDF by incorporating GNRs in the composites. With the optimized concentration of GNRs (1 wt%), the fabricated piezoelectric device can generate open-circuit voltage and an output power density of 26 V and 16.52 µWcm2, respectively. It is also found that the PVDF-GNR 1 nanogenerator can be used to generate electrical power by converting mechanical energy from different human activities such as wrist bending, palm tapping, and toe tapping. The findings indicate that (PVDF-GNR 1) PENG can be applied in self-powered portable and wearable electronic devices.

The Use of 18F-Fluoride Positron Emission Tomography/Computed Tomography Scanning to Identify Sources of Pain after Posterior Lumbar Interbody Fusion-An Analysis in Patients with and without Symptoms.

BACKGROUND: Identifying the cause of recurrent or persisting pain after posterior lumbar interbody fusion (PLIF) is essential for establishing optimal treatment. In this study, we evaluate patients after PLIF surgery by 18F-fluoride PET/CT scans and patient-reported outcome measures (PROMs). METHODS: A total of 36 PLIF patients were included. Sixty minutes after intravenous injection of 18F-fluoride, PET/CT scanning was performed. Bone graft ingrowth, subsidence, screw loosening and damage of facet joints were scored by quantifying the level of bone metabolism of the vertebral endplates in the disc spaces, around screws and around the facet joints on the PET scans. RESULTS: In contrast to asymptomatic patients, symptomatic patients showed abnormal PET values around pedicle screws and/or facet joints and at the lower endplates of the disc spaces, identifying a possible source of pain. On CT, no significant differences between these two groups were found. CONCLUSION: The PET/CT findings appeared to correlate better with symptoms on PROMs compared to CT findings alone. When interpreting 18F-fluoride PET/CT findings after PLIF surgery, one should realize bone metabolism in the disc spaces of the operated segments and around pedicle screws or facet joint changes during follow-up, reflecting natural recovery.

Evaluation of fluoride exposure using disability-adjusted life years and health risk assessment in south-western Iran: A novel Monte Carlo simulation.

Consumption of fluoride-contaminated water is a worldwide concern, especially in developing countries, including Iran. However, there are restricted studies of non-single-value health risk assessment and the disease burden regarding fluoride intake nationwide. Prolonged exposure to excessive fluoride has been linked to adverse health effects such as dental and skeletal fluorosis. This can lead to under-mineralization of hard tissues, causing aesthetic concerns for teeth and changes in bone structure, increasing the risk of fractures. As such, we aimed to implement probability-based frameworks using Monte Carlo methods to explore the potential adverse effects of fluoride via the ingestion route. This platform consists of two sectors: 1) health risk assessment of various age categories coupled with a variance decomposition technique to measure the contributions of predictor variables in the outcome of the health risk model, and 2) implementing Monte Carlo methods in dose-response curves to explore the fluoride-induced burden of diseases of dental fluorosis and skeletal fractures in terms of disability-adjusted life years (DALYs). For this purpose, total water samples of 8053 (N=8053) from 57 sites were analyzed in Fars and Bushehr Provinces. The mean fluoride concentrations were 0.75 mg/L and 1.09 mg/L, with maximum fluoride contents of 6.5 mg/L and 3.22 mg/L for the Fars and Bushehr provinces, respectively. The hazard quotient of the 95th percentile (HQ>1) revealed that all infants and children in the study area were potentially vulnerable to over-receiving fluoride. Sobol' sensitivity analysis indices, including first-order, second-order, and total order, disclosed that fluoride concentration (Cw), ingestion rate (IRw), and their mutual interactions were the most influential factors in the health risk model. DALYs rate of dental fluorosis was as high as 981.45 (uncertainty interval: UI 95 % 353.23-1618.40) in Lamerd, and maximum DALYs of skeletal fractures occurred in Mohr 71.61(49.75-92.71), in Fars Province, indicated severe dental fluorosis but mild hazard regarding fractures. Residents of the Tang-e Eram in Bushehr Province with a DALYs rate of 3609.40 (1296.68-5993.73) for dental fluorosis and a DALYs rate of 284.67 (199.11-367.99) for skeletal fractures were the most potentially endangered population. By evaluating the outputs of the DALYs model, the gap in scenarios of central tendency exposure and reasonable maximum exposure highlights the role of food source intake in over-receiving fluoride. This research insists on implementing defluoridation programs in fluoride-endemic zones to combat the undesirable effects of fluoride. The global measures presented in this research aim to address the root causes of contamination and help policymakers and authorities mitigate fluoride's harmful impacts on the environment and public health.

Efficient recovery of highly pure CaF2 from fluorine-containing wastewater using an icy lime solution.

Developing a feasible and low-cost strategy for the recovery of calcium fluoride efficiently from fluoride-containing wastewater is very essential for the recycle of fluoride resources. Herein, a modified lime precipitation method was employed to recover CaF2 from fluorinated wastewater using a special icy lime solution. Intriguingly, the highest F- removal was greater than 95% under the optimal condition, leaving a fluoride concentration from 200 to 8.64 mg/L, while the lime dosage was much lower than that of industry. Importantly, spherical-shaped CaF2 particles with a 93.47% purity and size smaller than 600 nm were recovered, which has a high potential for the production of hydrofluoric acid. Besides, the precipitation was significantly affected by Ca/F molar ratio, stirring time, temperature, and solution pH. Furthermore, the thermodynamics and kinetics were investigated in detail to reveal the crystallization process. As a result, the defluorination reaction followed the pseudo-second order reaction kinetics model. Also, CO2 in the air adversely influenced the CaF2 purity. Based on this facile method, a high lime utilization efficiency was applied to defluorination, which contributed to protecting the environment and saving costs. This study, therefore, provides a feasible approach for the green recovery of fluorine resources and has significance for related research.