Customized passive-dynamic ankle-foot orthoses can improve walking economy and speed for many individuals post-stroke.

BACKGROUND: Passive-dynamic ankle-foot orthoses (PD-AFOs) are often prescribed to address plantar flexor weakness during gait, which is commonly observed after stroke. However, limited evidence is available to inform the prescription guidelines of PD-AFO bending stiffness. This study assessed the extent to which PD-AFOs customized to match an individual's level of plantar flexor weakness influence walking function, as compared to No AFO and their standard of care (SOC) AFO. METHODS: Mechanical cost-of-transport, self-selected walking speed, and key biomechanical variables were measured while individuals greater than six months post-stroke walked with No AFO, with their SOC AFO, and with a stiffness-customized PD-AFO. Outcomes were compared across these conditions using a repeated measures ANOVA or Friedman test (depending on normality) for group-level analysis and simulation modeling analysis for individual-level analysis. RESULTS: Twenty participants completed study activities. Mechanical cost-of-transport and self-selected walking speed improved with the stiffness-customized PD-AFOs compared to No AFO and SOC AFO. However, this did not result in a consistent improvement in other biomechanical variables toward typical values. In line with the heterogeneous nature of the post-stroke population, the response to the PD-AFO was highly variable. CONCLUSIONS: Stiffness-customized PD-AFOs can improve the mechanical cost-of-transport and self-selected walking speed in many individuals post-stroke, as compared to No AFO and participants' standard of care AFO. This work provides initial efficacy data for stiffness-customized PD-AFOs in individuals post-stroke and lays the foundation for future studies to enable consistently effective prescription of PD-AFOs for patients post-stroke in clinical practice. TRIAL REGISTRATION: NCT04619043.

Suitable Heel Height, a Potential Method for Musculoskeletal Problems during the Third Trimester: A Pilot Study.

BACKGROUND: The treatment options for third-trimester musculoskeletal issues are limited. This study aims to examine how heel height affects gait biomechanics and provides heel height recommendations for various musculoskeletal problems. METHODS: Five third-trimester gravidas were recruited wearing uniform footwear with four heel heights (0 mm, 15 mm, 30 mm, and 45 mm). Lower-limb muscle forces, joint angles, joint torques, joint contact forces, and ground reaction forces (GRF) at specific moments (the first peak, valley, and second peak of GRF) were collected for one-way analysis of variance with repeated measures. RESULTS: The soleus, gastrocnemius, tibialis posterior, plantaris, obturator externus, gluteus maximus, gemellus superior, and obturator internus were the smallest at heel heights of 45 mm and 15 mm at the valley of GRF. Hip extension and knee flexion displayed the smallest joint angle and joint torques at a height of 15 mm. Ankle joint contact force decreased with increased heel height. CONCLUSIONS: The height of the heel significantly impacts muscle force, joint angles, joint torques, and joint contact force. A heel of 15 mm might be the most suitable heel height to potentially avoid or alleviate musculoskeletal problems during the third trimester.

The Biomechanical Influence of Step Width on Typical Locomotor Activities: A Systematic Review.

BACKGROUND: Step width is a spatial variable in the frontal plane, defined as the mediolateral distance between the heel (forefoot during sprinting) of bilateral feet at initial contact. Variations in step width may impact the lower limb biomechanics. This systematic review aimed to synthesize the published findings to determine the influence of acute changes in step width on locomotion biomechanics and provide implications for injury prevention and enhanced sports performance. METHODS: Literature was identified, selected, and appraised in accordance with the methods of a systematic review. Four electronic databases (Web of Science, MEDLINE via PubMed, Scopus, and ScienceDirect) were searched up until May 2023 with the development of inclusion criteria based on the PICO model. Study quality was assessed using the Downs and Black checklist and the measured parameters were summarized. RESULTS: Twenty-three articles and 399 participants were included in the systematic review. The average quality score of the 23 studies included was 9.39 (out of 14). Step width changed the kinematics and kinetics in the sagittal, frontal, and transverse planes of the lower limb, such as peak rearfoot eversion angle and moment, peak hip adduction angle and moment, knee flexion moment, peak knee internal rotation angle, as well as knee external rotation moment. Alteration of step width has the potential to change the stability and posture during locomotion, and evidence exists for the immediate biomechanical effects of variations in step width to alter proximal kinematics and cues to impact loading variables. CONCLUSION: Short-term changes in step width during walking, running, and sprinting influenced multiple lower extremity biomechanics. Narrower step width may result in poor balance and higher impact loading on the lower extremities during walking and running and may limit an athlete's sprint performance. Increasing step width may be beneficial for injury rehabilitation, i.e., for patients with patellofemoral pain syndrome, iliotibial band syndrome or tibial bone stress injury. Wider steps increase the supporting base and typically enhance balance control, which in turn could reduce the risks of falling during daily activities. Altering the step width is thus proposed as a simple and non-invasive treatment method in clinical practice.

Factors leading to falls in transfemoral prosthesis users: a case series of prosthesis-side stumble recovery responses.

BACKGROUND: Falls due to stumbling are prevalent for transfemoral prosthesis users and may lead to increased injury risk. This preliminary case series analyzes the transfemoral prosthesis user stumble recovery response to highlight key deficits in current commercially-available prostheses and proposes potential interventions to improve recovery outcomes. METHODS: Six transfemoral prosthesis users were perturbed on their prosthetic limb at least three times while walking on a treadmill using obstacle perturbations in early, mid and late swing. Kinematic data were collected to characterize the response, while fall rate and key kinematic recovery metrics were used to assess the quality of recovery and highlight functional deficits in current commercially-available prostheses. RESULTS: Across all participants, 13 (54%) of the 24 trials resulted in a fall (defined as > 50% body-weight support) with all but one participant (83%) falling at least once and two participants (33%) falling every time. In contrast, in a previous study of seven young, unimpaired, non-prosthesis users using the same experimental apparatus, no falls occurred across 190 trials. For the transfemoral prosthesis users, early swing had the highest rate of falling at 64%, followed by mid-swing at 57%, and then late swing at 33%. The trend in falls was mirrored by the kinematic recovery metrics (peak trunk angle, peak trunk angular velocity, forward reach of the perturbed limb, and knee angle at ground contact). In early swing all four metrics were deficient compared to non-prosthesis user controls. In mid swing, all but trunk angular velocity were deficient. In late swing only forward reach was deficient. CONCLUSION: Based on the stumble recovery responses, four potential deficiencies were identified in the response of the knee prostheses: (1) insufficient resistance to stance knee flexion upon ground contact; (2) insufficient swing extension after a perturbation; (3) difficulty initiating swing flexion following a perturbation; and (4) excessive impedance against swing flexion in early swing preventing the potential utilization of the elevating strategy. Each of these issues can potentially be addressed by mechanical or mechatronic changes to prosthetic design to improve quality of recovery and reduce the likelihood a fall.

Prolonged quadriceps latency during gait early after anterior cruciate ligament injury predicts radiographic knee osteoarthritis 6-years after anterior cruciate ligament reconstruction.

BACKGROUND: The purpose was to explore quadriceps electromechanical function (quadriceps latency) during gait after anterior cruciate ligament injury as a predictor for radiographic knee osteoarthritis 6-years after anterior cruciate ligament reconstruction. Change in latency after preoperative physical therapy was also examined. METHODS: Quadriceps latency (time between peak knee moment and quadriceps electromyography) was calculated before preoperative physical therapy (2.4 [0.5-7.5] months after anterior cruciate ligament injury) and after preoperative physical therapy in 24 athletes. Participants were dichotomized into osteoarthritis (Kellgren and Lawrence grade ≥ 2) and non-osteoarthritis groups at 6-years. Forward selection logistic regression was performed using z-score normalized quadriceps latency and demographics. A 2 × 2 repeated measure ANOVA was performed for quadriceps latency between groups before and after preoperative physical therapy. FINDINGS: Quadriceps latency before preoperative physical therapy was the only predictor of 6-year radiographic osteoarthritis (p = 0.014, odds ratio [95% confidence interval] = 5.859 [1.435-23.924]). Time by group interaction was observed for quadriceps latency (p = 0.039, η2p = 0.179). In the osteoarthritis group, latency may reduce after training (before preoperative physical therapy = 115.7 ± 20.6 ms, after preoperative physical therapy = 99.5 ± 24.0 ms, p = 0.082). INTERPRETATION: Prolonged latency after anterior cruciate ligament injury may predict post-traumatic knee osteoarthritis 6-years after anterior cruciate ligament reconstruction. Latency may shorten with preoperative physical therapy, yet athletes still moved on to develop osteoarthritis. Quadriceps function may need intervention immediately following anterior cruciate ligament injury for prevention of post-traumatic knee osteoarthritis.

Fourier Analysis of the Vertical Ground Reaction Force During Walking: Applications for Quantifying Differences in Gait Strategies.

Time series biomechanical data inform our understanding of normal gait mechanics and pathomechanics. This study examines the utility of different quantitative methods to distinguish vertical ground reaction forces (VGRFs) from experimentally distinct gait strategies. The goals of this study are to compare measures of VGRF data-using the shape factor method and a Fourier series-based analysis-to (1) describe how these methods reflect and distinguish gait patterns and (2) determine which Fourier series coefficients discriminate normal walking, with a relatively stiff-legged gait, from compliant walking, using deep knee flexion and limited vertical oscillation. This study includes a reanalysis of previously presented VGRF data. We applied the shape factor method and fit 3- to 8-term Fourier series to zero-padded VGRF data. We compared VGRF renderings using Euclidean L2 distances and correlations stratified by gait strategy. Euclidean L2 distances improved with additional harmonics, with limited improvement after the seventh term. Euclidean L2 distances were greater in shape factor versus Fourier series renderings. In the 8 harmonic model, amplitudes of 9 Fourier coefficients-which contribute to VGRF features including peak and local minimum amplitudes and limb loading rates-were different between normal and compliant walking. The results suggest that Fourier series-based methods distinguish between gait strategies.

The effect of amplitude normalization technique, walking speed, and reporting metric on whole-body angular momentum and its interpretation during normal gait.

Whole-body angular momentum (WBAM) represents the cancellations of angular momenta that are produced during a reciprocal gait pattern. WBAM is sensitive to small changes and is used to compare dynamic gait patterns under different walking conditions. Study designs and the normalization techniques used to define WBAM vary and make comparisons between studies difficult. To address this problem, WBAM about each anatomical axis of rotation from a healthy control population during normal gait were investigated within four metrics: 1) range of WBAM, 2) integrated WBAM, 3) statistical parametric mapping (SPM), and 4) principal component analysis (PCA). These data were studied as a function of walking speed and normalization. Normalization techniques included: 1) no normalization, 2) normalization by height, body mass and walking speed, and 3) normalization by height, body mass and a scalar number, gravity×height, that is independent of walking velocity. Significant results were obtained as a function of walking speed regardless of normalization technique. However, the interpretation of significance within each metric was dependent on the normalization technique. Method 3 was the most robust technique as the differences were not altered from the expected relationships within the raw data. Method 2 actually inverted the expected relationship in WBAM amplitude as a function of walking speed, which skewed the results and their interpretation. Overall, SPM and PCA statistical methods provided better insights into differences that may be important. However, depending on the normalization technique used, caution is advised when interpreting significant findings when comparing participants with disparate walking speeds.

Human-in-the-loop optimization of rocker shoes via different cost functions during walking.

Personalised footwear could be used to enhance the function of the foot-ankle complex to a person's maximum. Human-in-the-loop optimization could be used as an effective and efficient way to find a personalised optimal rocker profile (i.e., apex position and angle). The outcome of this process likely depends on the selected optimization objective and its responsiveness to the rocker parameters being tuned. This study aims to explore whether and how human-in-the-loop optimization via different cost functions (i.e., metabolic cost, collision work as measure for external mechanical work, and step distance variability as measure for gait stability) affects the optimal apex position and angle of a rocker profile differently for individuals during walking. Ten healthy individuals walked on a treadmill with experimental rocker shoes in which apex position and angle were optimized using human-in-the-loop optimization using different cost functions. We compared the obtained optimal apex parameters for the different cost functions and how these affected the selected gait related objectives. Optimal apex parameters differed substantially between participants and optimal apex positions differed between cost functions. The responsiveness to changes in apex parameters differed between cost functions. Collision work was the only cost function that resulted in a significant improvement of its performance criteria. Improvements in metabolic cost or step distance variability were not found after optimization. This study showed that cost function selection is important when human-in-the-loop optimization is used to design personalised footwear to allow conversion to an optimum that suits the individual.

Obesity-Specific Considerations for Assessing Gait with Inertial Measurement Unit-Based vs. Optokinetic Motion Capture.

Adults with obesity experience high rates of disability and rapid functional decline. Identifying movement dysfunction early can direct intervention and disrupt disability development; however, subtle changes in movement are difficult to detect with the naked eye. This study evaluated how a portable, inertial measurement unit (IMU)-based motion capture system compares to a laboratory-based optokinetic motion capture (OMC) system for evaluating gait kinematics in adults with obesity. Ten adults with obesity performed overground walking while equipped with the OMC and IMU systems. Fifteen gait cycles for each participant were extracted for the 150 total cycles analyzed. Kinematics were compared between OMC and IMU across the gait cycles (coefficient of multiple correlations), at clinically significant time points (interclass correlations), and over clinically relevant ranges (Bland-Altman plots). Sagittal plane kinematics were most similar between systems, especially at the knee. Sagittal plane joint angles at clinically meaningful timepoints were poorly associated except for ankle dorsiflexion at heel strike (ρ = 0.38) and minimum angle (ρ = 0.83). All motions except for ankle dorsiflexion and hip abduction had >5° difference between systems across the range of angles measured. While IMU-based motion capture shows promise for detecting subtle gait changes in adults with obesity, more work is needed before this method can replace traditional OMC. Future work should explore standardization procedures to improve consistency of IMU motion capture performance.

Peripheral artery disease causes consistent gait irregularities regardless of the location of leg claudication pain.

BACKGROUND: The most common symptom of peripheral artery disease (PAD) is intermittent claudication that involves the calf, thigh, and/or buttock muscles. How the specific location of this leg pain is related to altered gait, however, is unknown. OBJECTIVES: We hypothesized that because the location of claudication symptoms uniquely affects different leg muscle groups in people with PAD, this would produce distinctive walking patterns. METHODS: A total of 105 participants with PAD and 35 age-matched older volunteers without PAD (CTRL) were recruited. Participants completed walking impairment questionnaires (WIQ), Gardner-Skinner progressive treadmill tests, the six-minute walk test, and we performed an advanced evaluation of the biomechanics of their overground walking. Participants with PAD were categorized into 4 groups according to their stated pain location(s): calf only (C, n = 43); thigh and calf (TC, n = 18); buttock and calf (BC, n = 15); or buttock, thigh, and calf (BTC, n = 29). Outcomes were compared between CTRL, C, TC, BC and BTC groups using a one-way ANOVA with post-hoc comparisons to identify and assess statistically significant differences. RESULTS: There were no significant differences between CTRL, C, TC, BC and BTC groups in distances walked or walking speed when either pain-free or experiencing claudication pain. Each participant with PAD had significantly dysfunctional biomechanical gait parameters, even when pain-free, when compared to CTRL (pain-free) walking data. During pain-free walking, out of the 18 gait parameters evaluated, we only identified significant differences in hip power generation during push-off (in C and TC groups) and in knee power absorption during weight acceptance (in TC and BC groups). There were no between-group differences in gait parameters while people with PAD were walking with claudication pain. CONCLUSIONS: Our data demonstrate that PAD affects the ischemic lower extremities in a diffuse manner irrespective of the location of claudication symptoms. DATABASE REGISTRATION: ClinicalTrials.gov NCT01970332.

The Influence of Materials on Footwear Behaviour: A Finite Element Simulation Study.

The objective of this study was to analyse the influence of materials and their position within the upper assembly on the behaviour of casual footwear using finite element simulation tools. The study was carried out on three models of casual footwear, which are identical in terms of design lines, varying only in the materials of the upper assembly, namely calfskin leather (M1), knitted fabric (M2), and combination of knitted fabric and calfskin leather (M3). The footwear models were designed according to the design constraints specific to casual footwear. The foot was reconstructed based on the shoe last obtained based on anthropometric data. Material definition, 3D models editing, setting up analysis conditions, and constraints were performed using the Ansys 17.2 software. Gait biomechanics were taken into account to define the loading model, force distribution, force values, and constraints. The study evaluates footwear behaviour in terms of directional deformation (Z axis), equivalent von Mises stress, and equivalent elastic strain distribution. This paper explores a methodology that has the potential to enhance the footwear design and manufacturing process, providing designers with information about the deformations and stress distribution on upper parts of the footwear product.

Acceleration-Based Estimation of Vertical Ground Reaction Forces during Running: A Comparison of Methods across Running Speeds, Surfaces, and Foot Strike Patterns.

Twenty-seven methods of estimating vertical ground reaction force first peak, loading rate, second peak, average, and/or time series from a single wearable accelerometer worn on the shank or approximate center of mass during running were compared. Force estimation errors were quantified for 74 participants across different running surfaces, speeds, and foot strike angles and biases, repeatability coefficients, and limits of agreement were modeled with linear mixed effects to quantify the accuracy, reliability, and precision. Several methods accurately and reliably estimated the first peak and loading rate, however, none could do so precisely (the limits of agreement exceeded ±65% of target values). Thus, we do not recommend first peak or loading rate estimation from accelerometers with the methods currently available. In contrast, the second peak, average, and time series could all be estimated accurately, reliably, and precisely with several different methods. Of these, we recommend the 'Pogson' methods due to their accuracy, reliability, and precision as well as their stability across surfaces, speeds, and foot strike angles.

Understanding the form and function in Chinese bound foot from last-generation cases.

Purpose: Foot adaptation in the typically developed foot is well explored. In this study, we aimed to explore the form and function of an atypical foot, the Chinese bound foot, which had a history of over a thousand years but is not practised anymore. Methods: We evaluated the foot shape and posture via a statistical shape modelling analysis, gait plantar loading distribution via gait analysis, and bone density adaptation via implementing finite element simulation and bone remodelling prediction. Results: The atypical foot with binding practice led to increased foot arch and vertically oriented calcaneus with larger size at the articulation, apart from smaller metatarsals compared with a typically developed foot. This shape change causes the tibia, which typically acts as a load transfer beam and shock absorber, to extend its function all the way through the talus to the calcaneus. This is evident in the bound foot by i) the reduced center of pressure trajectory in the medial-lateral direction, suggesting a reduced supination-pronation; ii) the increased density and stress in the talus-calcaneus articulation; and iii) the increased bone growth in the bound foot at articulation joints in the tibia, talus, and calcaneus. Conclusion: Knowledge from the last-generation bound foot cases may provide insights into the understanding of bone resorption and adaptation in response to different loading profiles.

Virtual reality-enhanced walking in people post-stroke: effect of optic flow speed and level of immersion on the gait biomechanics.

BACKGROUND: Optic flow-the apparent visual motion experienced while moving-is absent during treadmill walking. With virtual reality (VR), optic flow can be controlled to mediate alterations in human walking. The aim of this study was to investigate (1) the effects of fully immersive VR and optic flow speed manipulation on gait biomechanics, simulator sickness, and enjoyment in people post-stroke and healthy people, and (2) the effects of the level of immersion on optic flow speed and sense of presence. METHODS: Sixteen people post-stroke and 16 healthy controls performed two VR-enhanced treadmill walking sessions: the semi-immersive GRAIL session and fully immersive head-mounted display (HMD) session. Both consisted of five walking trials. After two habituation trials (without and with VR), participants walked three more trials under the following conditions: matched, slow, and fast optic flow. Primary outcome measures were spatiotemporal parameters and lower limb kinematics. Secondary outcomes (simulator sickness, enjoyment, and sense of presence) were assessed with the Simulator Sickness Questionnaire, Visual Analogue Scales, and Igroup Presence Questionnaire. RESULTS: When walking with the immersive HMD, the stroke group walked with a significantly slower cadence (-3.69strides/min, p = 0.006), longer stride time (+ 0.10 s, p = 0.017) and stance time for the unaffected leg (+ 1.47%, p = 0.001) and reduced swing time for the unaffected leg (- 1.47%, p = 0.001). Both groups responded to the optic flow speed manipulation such that people accelerated with a slow optic flow and decelerated with a fast optic flow. Compared to the semi-immersive GRAIL session, manipulating the optic flow speed with the fully immersive HMD had a greater effect on gait biomechanics whilst also eliciting a higher sense of presence. CONCLUSION: Adding fully immersive VR while walking on a self-paced treadmill led to a more cautious gait pattern in people post-stroke. However, walking with the HMD was well tolerated and enjoyable. People post-stroke altered their gait parameters when optic flow speed was manipulated and showed greater alterations with the fully-immersive HMD. Further work is needed to determine the most effective type of optic flow speed manipulation as well as which other principles need to be implemented to positively influence the gait pattern of people post-stroke. TRIAL REGISTRATION NUMBER: The study was pre-registered at ClinicalTrials.gov (NCT04521829).

Walking speed differentially affects lower extremity biomechanics in individuals with anterior cruciate ligament reconstruction compared to uninjured controls.

BACKGROUND: Walking biomechanics are commonly affected after anterior cruciate ligament reconstruction and differ compared to uninjured controls. Manipulating task difficulty has been shown to affect the magnitude of walking impairments in those early after knee surgery but it is unclear if patients in later phases post-op are similarly affected by differing task demands. Here, we evaluated the effects of manipulating walking speed on between-limb differences in ground reaction force and knee biomechanics in those with and without anterior cruciate ligament reconstruction. METHODS: We recruited 28 individuals with anterior cruciate ligament reconstruction and 20 uninjured control participants to undergo walking assessments at three speeds (self-selected, 120%, and 80% self-selected speed). Main outcomes included sagittal plane knee moments, angles, excursions, and ground reaction forces (vertical and anterior-posterior). FINDINGS: We observed walking speed differentially impacted force and knee-outcomes in those with anterior cruciate ligament reconstruction. Between-limb differences increased at fast and decreased at slow speeds in those with anterior cruciate ligament reconstruction while uninjured participants maintained between-limb differences regardless of speed (partial η2 = 0.13-0.33, p < 0.05). Anterior cruciate ligament reconstruction patients underloaded the surgical limb relative to both the contralateral, and uninjured controls in GRFs and sagittal plane knee moments (partial η2 range = 0.13-0.25, p < 0.05). INTERPRETATION: Overall, our findings highlight the persistence of walking impairments in those with anterior cruciate ligament reconstruction despite completing formal rehabilitation. Further research should consider determining if those displaying larger changes in gait asymmetries in response to fast walking also exhibit poorer strength and/or joint health outcomes.

Interacting effects of AFO stiffness, neutral angle and footplate stiffness on gait in case of plantarflexor weakness: A predictive simulation study.

To maximize effects of dorsal leaf ankle foot orthoses (AFOs) on gait in people with bilateral plantarflexor weakness, the AFO properties should be matched to the individual. However, how AFO properties interact regarding their effect on gait function is unknown. We studied the interaction of AFO bending stiffness with neutral angle and footplate stiffness on the effect of bending stiffness on walking energy cost, gait kinematics and kinetics in people with plantarflexor weakness by employing predictive simulations. Our simulation framework consisted of a planar 11 degrees of freedom model, containing 11 muscles activated by a reflex-based neuromuscular controller. The controller was optimized by a comprehensive cost function, predominantly minimizing walking energy cost. The AFO bending and footplate stiffness were modelled as torsional springs around the ankle and metatarsal joint. The neutral angle of the AFO was defined as the angle in the sagittal plane at which the moment of the ankle torsional spring was zero. Simulations without AFO and with AFO for 9 bending stiffnesses (0-14 Nm/degree), 3 neutral angles (0-3-6 degrees dorsiflexion) and 3 footplate stiffnesses (0-0.5-2.0 Nm/degree) were performed. When changing neutral angle towards dorsiflexion, a higher AFO bending stiffness minimized energy cost of walking and normalized joint kinematics and kinetics. Footplate stiffness mainly affected MTP joint kinematics and kinetics, while no systematic and only marginal effects on energy cost were found. In conclusion, the interaction of the AFO bending stiffness and neutral angle in bilateral plantarflexor weakness, suggests that these should both be considered together when matching AFO properties to the individual patient.

Effect of age and speed on the step-to-step transition strategies in children.

The development and acquisition of mature walking in children is multifactorial, depending among others on foot interaction with the ground, body dynamics and the knowledge of the 'rules' stemming from the gravity field. Indeed, each step the velocity of the centre of mass must be redirected upwards. This redirection may be initiated by the trailing leg, propulsing forward and upward the body before foot contact, or later by the loading limb after the contact with the ground. While it has been suggested that mature walking develops slowly from first independent steps to about 7 years of age, it is still unknown how children acquire the appropriate loading and propulsion forces during the step-to-step transition. To answer that question, twenty-four children (from 3 to 12 years old) and twelve young adults (from 20 to 27 years old) walked on force platforms at different walking speed. The ground reaction forces under each foot were recorded and the vertical velocity of the centre of mass of the body was computed. With decreasing age and increasing velocity (or Froude number), the occurrence of unanticipated transition is higher, related to a different ratio between the vertical support of the front and back leg. The different transition strategy observed in children indicates that body weight transfer from one limb to the other is not fully mature at 12 years old.

Ankle-targeted exosuit resistance increases paretic propulsion in people post-stroke.

BACKGROUND: Individualized, targeted, and intense training is the hallmark of successful gait rehabilitation in people post-stroke. Specifically, increasing use of the impaired ankle to increase propulsion during the stance phase of gait has been linked to higher walking speeds and symmetry. Conventional progressive resistance training is one method used for individualized and intense rehabilitation, but often fails to target paretic ankle plantarflexion during walking. Wearable assistive robots have successfully assisted ankle-specific mechanisms to increase paretic propulsion in people post-stroke, suggesting their potential to provide targeted resistance to increase propulsion, but this application remains underexamined in this population. This work investigates the effects of targeted stance-phase plantarflexion resistance training with a soft ankle exosuit on propulsion mechanics in people post-stroke. METHODS: We conducted this study in nine individuals with chronic stroke and tested the effects of three resistive force magnitudes on peak paretic propulsion, ankle torque, and ankle power while participants walked on a treadmill at their comfortable walking speeds. For each force magnitude, participants walked for 1 min while the exosuit was inactive, 2 min with active resistance, and 1 min with the exosuit inactive, in sequence. We evaluated changes in gait biomechanics during the active resistance and post-resistance sections relative to the initial inactive section. RESULTS: Walking with active resistance increased paretic propulsion by more than the minimal detectable change of 0.8 %body weight at all tested force magnitudes, with an average increase of 1.29 ± 0.37 %body weight at the highest force magnitude. This improvement corresponded to changes of 0.13 ± 0.03 N m kg- 1 in peak biological ankle torque and 0.26 ± 0.04 W kg- 1 in peak biological ankle power. Upon removal of resistance, propulsion changes persisted for 30 seconds with an improvement of 1.49 ± 0.58 %body weight after the highest resistance level and without compensatory involvement of the unresisted joints or limb. CONCLUSIONS: Targeted exosuit-applied functional resistance of paretic ankle plantarflexors can elicit the latent propulsion reserve in people post-stroke. After-effects observed in propulsion highlight the potential for learning and restoration of propulsion mechanics. Thus, this exosuit-based resistive approach may offer new opportunities for individualized and progressive gait rehabilitation.