Ideotype based genotype selection in a multivariate dataset of sweet potato (Ipomoea batatas L.).

The dataset extensively examines the factors considered when choosing sweet potato genotypes, considering various characteristics. Notably, Moz1.15 demonstrated the highest marketable root yield at 46.46 t/ha, H5.ej.10 exhibited the highest beta-carotene level at 48.94 mg/100 g, and Moz1.9 recorded the highest vitamin C content at 23.89 mg/100 g. Moreover, there were significant correlations (ranging from 0.21 to 0.84) among the yield and quality traits studied in sweet potatoes. Principal component analysis (PCA) confirmed the connections among these traits, identifying four distinct clusters of genotypes, each characterized by specific significant combinations of traits. Factor analysis using the multi-trait genotype-ideotype index (MGIDI) highlighted the considerable impact of sweet potato traits across two growing seasons (2020-21 and 2021-22), facilitating the selection of genotypes with potential genetic gains ranging from 1.86 % to 75.4 %. Broad-sense heritability (h2) varied from 64.9 % to 99.8 %. The use of the MGIDI index pinpointed several promising genotypes, with BARI Mistialu-12 and H9.7.12 consistently performing well over both years. These genotypes exhibited both strengths and weaknesses.

Genetic trends in the Zimbabwe's national maize breeding program over two decades.

Monitoring genetic gains within breeding programs is a critical component for continuous improvement. While several national breeding programs in Africa have assessed genetic gain using era studies, this study is the first to use two decades of historical data to estimate genetic trends within a national breeding program. The objective of this study was to assess genetic trends within the final two stages of Zimbabwe's Department of Research & Specialist Services maize breeding pipeline between 2002 and 2021. Data from 107 intermediate and 162 advanced variety trials, comprising of 716 and 398 entries, respectively, was analyzed. Trials were conducted under optimal, managed drought stress, low nitrogen stress, low pH, random stress, and disease pressure (maize streak virus (MSV), grey leaf spot (GLS), and turcicum leaf blight under artificial inoculation. There were positive and significant genetic gains for grain yield across management conditions (28-35 kg ha-1 yr-1), under high-yield potential environments (17-61 kg ha-1 yr-1), and under low-yield potential environments (0-16 kg ha-1 yr-1). No significant changes were observed in plant and ear height over the study period. Stalk and root lodging, as well as susceptibility to MSV and GLS, significantly decreased over the study period. New breeding technologies need to be incorporated into the program to further increase the rate of genetic gain in the maize breeding programs and to effectively meet future needs.

Genetic trends in the Kenya Highland Maize Breeding Program between 1999 and 2020.

Optimization of a breeding program requires assessing and quantifying empirical genetic trends made through past efforts relative to the current breeding strategies, germplasm, technologies, and policy. To establish the genetic trends in the Kenyan Highland Maize Breeding Program (KHMP), a two-decade (1999-2020) historical dataset from the Preliminary Variety Trials (PVT) and Advanced Variety Trials (AVT) was analyzed. A mixed model analysis was used to compute the genetic gains for traits based on the best linear unbiased estimates in the PVT and AVT evaluation stages. A positive significant genetic gain estimate for grain yield of 88 kg ha-1 year-1 (1.94% year-1) and 26 kg ha-1 year-1 (0.42% year-1) was recorded for PVT and AVT, respectively. Root lodging, an important agronomic trait in the Kenya highlands, had a desired genetic gain of -2.65% year-1 for AVT. Results showed improvement in resistance to Turcicum Leaf Blight (TLB) with -1.19% and -0.27% year-1 for the PVT and AVT, respectively. Similarly, a significant genetic trend of -0.81% was noted for resistance to Gray Leaf Spot (GLS) in AVT. These findings highlight the good progress made by KHMP in developing adapted maize hybrids for Kenya's highland agroecology. Nevertheless, the study identified significant opportunities for the KHMP to make even greater genetic gains for key traits with introgression of favorable alleles for various traits, implementing a continuous improvement plan including marker-assisted forward breeding, sparse testing, and genomic selection, and doubled haploid technology for line development.

Genetic Gain and Inbreeding in Different Simulated Genomic Selection Schemes for Grain Yield and Oil Content in Safflower.

Safflower (Carthamus tinctorius L.) is a multipurpose minor crop consumed by developed and developing nations around the world with limited research funding and genetic resources. Genomic selection (GS) is an effective modern breeding tool that can help to fast-track the genetic diversity preserved in genebank collections to facilitate rapid and efficient germplasm improvement and variety development. In the present study, we simulated four GS strategies to compare genetic gains and inbreeding during breeding cycles in a safflower recurrent selection breeding program targeting grain yield (GY) and seed oil content (OL). We observed positive genetic gains over cycles in all four GS strategies, where the first cycle delivered the largest genetic gain. Single-trait GS strategies had the greatest gain for the target trait but had very limited genetic improvement for the other trait. Simultaneous selection for GY and OL via indices indicated higher gains for both traits than crossing between the two single-trait independent culling strategies. The multi-trait GS strategy with mating relationship control (GS_GY + OL + Rel) resulted in a lower inbreeding coefficeint but a similar gain compared to that of the GS_GY + OL (without inbreeding control) strategy after a few cycles. Our findings lay the foundation for future safflower GS breeding.

Genetics of phenological development and implications for seed yield in lentil.

Understanding phenology, its genetics and agronomic consequences, is critical for crop adaptation. Here we aim at (1) characterising lentil response to photoperiod with a focus on five loci: the lentil ELF3 ortholog Sn, two loci linked to clusters of lentil FT orthologs and two loci without candidates in chromosomes 2 and 5 (exp. 1: 36 lines, short and long day in phytotron); (2) establishing phenology-yield relationship (exp. 2: 25 lines, 11 field environments). A vintage perspective, where we quantify time trends in phenotype over three decades of breeding, links both experiments. Yield increased linearly from older to newer varieties at 29 kg ha-1 yr-1 or 1.5% yr-1, correlated negatively with flowering time in both winter- and summer-rainfall regimes, and decoupled from biomass in favourable environments. Time to flowering shortened from older to newer varieties at -0.56 % yr-1 in the field, and -0.42 % yr-1 (short day) and -0.99 % yr-1 (long day) in the phytotron. Early-flowering lines of diverse origin carried multiple early alleles for the five loci, indicating that at least some of these loci affect phenology additively. Current germplasm primarily features the early flowering haplotype for an FTb cluster region, hence the potential to increase phenological diversity with yield implications.

Harnessing monocrop breeding strategies for intercrops.

Intercropping is considered advantageous for many reasons, including increased yield stability, nutritional value and the provision of various regulating ecosystem services. However, intercropping also introduces diverse competition effects between the mixing partners, which can negatively impact their agronomic performance. Therefore, selecting complementary intercropping partners is the key to realizing a well-mixed crop production. Several specialized intercrop breeding concepts have been proposed to support the development of complementary varieties, but their practical implementation still needs to be improved. To lower this adoption threshold, we explore the potential of introducing minor adaptations to commonly used monocrop breeding strategies as an initial stepping stone towards implementing dedicated intercrop breeding schemes. While we acknowledge that recurrent selection for reciprocal mixing abilities is likely a more effective breeding paradigm to obtain genetic progress for intercrops, a well-considered adaptation of monoculture breeding strategies is far less intrusive concerning the design of the breeding programme and allows for balancing genetic gain for both monocrop and intercrop performance. The main idea is to develop compatible variety combinations by improving the monocrop performance in the two breeding pools in parallel and testing for intercrop performance in the later stages of selection. We show that the optimal stage for switching from monocrop to intercrop testing should be adapted to the specificity of the crop and the heritability of the traits involved. However, the genetic correlation between the monocrop and intercrop trait performance is the primary driver of the intercrop breeding scheme optimization process.

The predicted benefits of genomic selection on pig breeding objectives.

The premise was tested that the additional genetic gain was achieved in the overall breeding objective in a pig breeding program using genomic selection (GS) compared to a conventional breeding program, however, some traits achieved larger gain than other traits. GS scenarios based on different reference population sizes were evaluated. The scenarios were compared using a deterministic simulation model to predict genetic gain in scenarios with and without using genomic information as an additional information source. All scenarios were compared based on selection accuracy and predicted genetic gain per round of selection for objective traits in both sire and dam lines. The results showed that GS scenarios increased overall response in the breeding objectives by 9% to 56% and 3.5% to 27% in the dam and sire lines, respectively. The difference in response resulted from differences in the size of the reference population. Although all traits achieved higher selection accuracy in GS, traits with limited phenotypic information at the time of selection or with low heritability, such as sow longevity, number of piglets born alive, pre- and post-weaning survival, as well as meat and carcass quality traits achieved the largest additional response. This additional response came at the expense of smaller responses for traits that are easy to measure, such as back fat and average daily gain in GS compared to the conventional breeding program. Sow longevity and drip loss percentage did not change in a favourable direction in GS with a reference population of 500 pigs. With a reference population of 1000 pigs or onwards, sow longevity and drip loss percentage began to change in a favourable direction. Despite the smaller responses for average daily gain and back fat thickness in GS, the overall breeding objective achieved additional gain in GS.

Community-based breeding programs can realize sustainable genetic gain and economic benefits in tropical dairy cattle systems.

Implementing an appropriate breeding program is crucial to control fluctuation in performance, enhance adaptation, and further improve the crossbred population of dairy cattle. Five alternative breeding programs (BPs) were modeled considering available breeding units in the study area, the existing crossbreeding practices, and the future prospects of dairy research and development in Ethiopia. The study targeted 143,576 crossbred cows of 54,822 smallholder households in the Arsi, West Shewa, and North Shewa zones of the Oromia Region, as well as the North Shewa zone of the Amhara Region. The alternative BPs include conventional on-station progeny testing (SPT), conventional on-farm progeny testing (FPT), conventional on-station and on-farm progeny testing (SFPT), genomic selection (GS), and genomic progeny testing (GPT). Input parameters for modeling the BPs were taken from the analysis of long-term data obtained from the Holetta Agricultural Research Center and a survey conducted in the study area. ZPLAN+ software was used to predict estimates of genetic gain (GG) and discounted profit for goal traits. The predicted genetic gains (GGs) for milk yield (MY) per year were 34.52 kg, 49.63 kg, 29.35 kg, 76.16 kg, and 77.51 kg for SPT, FPT, SFPT, GS, and GPT, respectively. The GGs of the other goal traits range from 0.69 to 1.19 days per year for age at first calving, from 1.20 to 2.35 days per year for calving interval, and from 0.06 to 0.12 days per year for herd life. Compared to conventional BPs, genomic systems (GPT and GS) enhanced the GG of MY by 53%-164%, reduced generation interval by up to 21%, and improved the accuracy of test bull selection from 0.33 to 0.43. The discounted profit of the BPs varied from 249.58 Ethiopian Birr (ETB, 1 USD = 39.55696 ETB) per year in SPT to 689.79 ETB per year in GS. Genomic selection outperforms SPT, SFPT, and FPT by 266, 227%, and 138% of discounted profit, respectively. Community-based crossbreeding accompanied by GS and gradual support with progeny testing (GPT) is recommended as the main way forward to attain better genetic progress in dairy farms in Ethiopia and similar scenarios in other tropical countries.

Genetic gains in forage sorghum for adaptive traits for non - conventional area through multi-trait-based stability selection methods.

Introduction: In the Asian tropics, unpredictable weather increases the risk of abiotic stresses in sorghum areas, making it harder to meet predicted demand. Genotype-by environment interaction (GEI) and the lack of an effective multi-trait-based selection approach make it challenging to breed climateresilient forage sorghum that adapts to nonconventional areas. Methods: The present investigation carried out to estimate genetic parameters, inter trait associations, genetic gain under selection (SGs) of 95 diverse forage sorghum genotypes. Fourteen forage yield and other secondary traits were evaluated at five different growing seasons at two locations. Negative and positive genetic gains under selection were estimated across different growing seasons including Kharif, Rabi and Summer in the year 2020 and 2021. Results and discussion: The GEI effects were significant (P < 0.001) for all the studied traits. The multi trait based stability indices have been said to assist breeders in ensuring sustained progress in primary traits likeforage yield without sacrificing genetic advancement in secondary traits. Fourteen genotypes were selected through each evaluation methods including genotype - ideotype distance index (MGIDI), multi-trait stability index (MTSI), multi-trait stability and mean performance (MTMPS) and multi-trait index based on factor analysis and genotype-ideotype distance (FAIBLUP Index), assuming 15% selection intensity. According to MGIDI, the selected genotypes exhibited desired positive genetic gains for dry forage yield per plant, inter-nodal length, green forage yield per plant, and plant height and negative genetic gains for days to 50% flowering. The strength and weakness plot is a potential graphical tool as portrayed by MGIDI, to identify and develop desirable genotype for particular environment. Two genotypes, G36 (302B) and G89 (348B) were found to be common across all four evaluation methods based on all the studied traits. Background: Multi-trait stability evaluation approaches are reliable and accessible for selecting multiple traits under varied testing environments with low multicollinearity issues. These tools proved effective in enhancing selection strategies and optimising breeding schemes for the development of climate-resilient forage sorghum genotypes. The aforementioned genotypes were found to be the most reliable, high-yielding, and earlymaturing and could be suggested for variety and hybrid development and ideotype breeding programmes to ensure the food and nutritional security.

Genomic selection in plant breeding: Key factors shaping two decades of progress.

Genomic selection, the application of genomic prediction (GP) models to select candidate individuals, has significantly advanced in the past two decades, effectively accelerating genetic gains in plant breeding. This article provides a holistic overview of key factors that have influenced GP in plant breeding during this period. We delved into the pivotal roles of training population size and genetic diversity, and their relationship with the breeding population, in determining GP accuracy. Special emphasis was placed on optimizing training population size. We explored its benefits and the associated diminishing returns beyond an optimum size. This was done while considering the balance between resource allocation and maximizing prediction accuracy through current optimization algorithms. The density and distribution of single-nucleotide polymorphisms, level of linkage disequilibrium, genetic complexity, trait heritability, statistical machine-learning methods, and non-additive effects are the other vital factors. Using wheat, maize, and potato as examples, we summarize the effect of these factors on the accuracy of GP for various traits. The search for high accuracy in GP-theoretically reaching one when using the Pearson's correlation as a metric-is an active research area as yet far from optimal for various traits. We hypothesize that with ultra-high sizes of genotypic and phenotypic datasets, effective training population optimization methods and support from other omics approaches (transcriptomics, metabolomics and proteomics) coupled with deep-learning algorithms could overcome the boundaries of current limitations to achieve the highest possible prediction accuracy, making genomic selection an effective tool in plant breeding.

Comparison of pooled semen insemination and single colony insemination as sustainable honeybee breeding strategies.

Instrumental insemination of honeybees allows for two opposing breeding strategies. In single colony insemination (SCI), all drones to inseminate a queen are taken from one colony. In pooled semen insemination (PSI), sperm of many genetically diverse drones is mixed and queens are fertilized from the resulting drone pool. While SCI allows for maximum pedigree control, proponents of PSI claim to reduce inbreeding and maintain genetic variance. Using stochastic simulation studies, we compared genetic progress and inbreeding rates in small honeybee populations under SCI and PSI. Four different selection criteria were covered: estimated breeding values (EBV), phenotypes, true breeding values (TBV) and random selection. Under EBV-based truncation selection, SCI yielded 9.0% to 44.4% higher genetic gain than PSI, but had vastly increased inbreeding rates. Under phenotypical or TBV selection, the gap between SCI and PSI in terms of genetic progress narrowed. Throughout, PSI yielded lower inbreeding rates than SCI, but the differences were only substantial under EBV truncation selection. As a result, PSI did not appear as a viable breeding strategy owing to its incompatibility with modern methods of genetic evaluation. Instead, SCI is to be preferred but instead of strict truncation selection, strategies to avoid inbreeding need to be installed.

Genomic selection for growth characteristics in Korean red pine (Pinus densiflora Seibold & Zucc.).

Traditionally, selective breeding has been used to improve tree growth. However, traditional selection methods are time-consuming and limit annual genetic gain. Genomic selection (GS) offers an alternative to progeny testing by estimating the genotype-based breeding values of individuals based on genomic information using molecular markers. In the present study, we introduced GS to an open-pollinated breeding population of Korean red pine (Pinus densiflora), which is in high demand in South Korea, to shorten the breeding cycle. We compared the prediction accuracies of GS for growth characteristics (diameter at breast height [DBH], height, straightness, and volume) in Korean red pines under various conditions (marker set, model, and training set) and evaluated the selection efficiency of GS compared to traditional selection methods. Training the GS model to include individuals from various environments using genomic best linear unbiased prediction (GBLUP) and markers with a minor allele frequency larger than 0.05 was effective. The optimized model had an accuracy of 0.164-0.498 and a predictive ability of 0.018-0.441. The predictive ability of GBLUP against that of additive best linear unbiased prediction (ABLUP) was 0.86-5.10, and against the square root of heritability was 0.19-0.76, indicating that GS for Korean red pine was as efficient as in previous studies on forest trees. Moreover, the response to GS was higher than that to traditional selection regarding the annual genetic gain. Therefore, we conclude that the trained GS model is more effective than the traditional breeding methods for Korean red pines. We anticipate that the next generation of trees selected by GS will lay the foundation for the accelerated breeding of Korean red pine.

Economic benefits of herd genotyping and using sexed semen for pure and beef-on-dairy breeding in dairy herds.

The cost benefits of herd genotyping and the benefits of using sexed semen have been affected by recent improvements in sexing technologies, incorporation of direct health traits in the German total merit index for Holstein cattle, deteriorating prices for purebred heifer calves and bull calves, and introduction of herd genotyping programs. Inseminating genetically superior dams with female-sexed Holstein semen increases the mean breeding value of heifer calves and can produce more Holstein heifer calves than are needed for replacement. This provides an opportunity to increase the selection response in health and production traits at the farm level. A deterministic model is introduced that predicts the increase or decrease in net profit when a farmer takes part in a herd genotyping program and follows a certain insemination strategy. The types of semen allocated to cows and heifers may be sexed or unsexed and Holstein or beef breed. Genetically superior heifers and cows are inseminated with female-sexed Holstein semen, intermediate dams with unsexed Holstein semen, and genetically inferior dams with unsexed or male-sexed beef breed semen. In general, participating in a herd genotyping program is beneficial for German Holstein breeders. The optimum proportions of cows and heifers that should be inseminated with a certain type of semen are sensitive to farm-specific peculiarities. A small price difference between crossbred bull calves and crossbred heifer calves often makes the use of male-sexed beef breed semen uneconomic. Under the conditions considered, it was found to be advantageous to inseminate approximately 50% of heifers and 10% of cows with the highest genetic merit with female-sexed Holstein semen. The optimum proportion of cows that should be inseminated with unsexed beef breed semen was found to be approximately 40%. In a herd with a low replacement rate, the selected heifers can exhibit their genetic superiority over a longer period of time, and a larger proportion of cows can be inseminated with beef breed semen. Participation in a herd genotyping program is, therefore, particularly beneficial for herds with low replacement rates.

Realized Genetic Gain in Rice: Achievements from Breeding Programs.

Genetic improvement is crucial for ensuring food security globally. Indeed, plant breeding has contributed significantly to increasing the productivity of major crops, including rice, over the last century. Evaluating the efficiency of breeding strategies necessitates a quantification of this progress. One approach involves assessing the genetic gain achieved through breeding programs based on quantitative traits. This study aims to provide a theoretical understanding of genetic gain, summarize the major results of genetic gain studies in rice breeding, and suggest ways of improving breeding program strategies and future studies on genetic gain. To achieve this, we present the concept of genetic gain and the essential aspects of its estimation. We also provide an extensive literature review of genetic gain studies in rice (Oryza sativa L.) breeding programs to understand the advances made to date. We reviewed 29 studies conducted between 1999 and 2023, covering different regions, traits, periods, and estimation methods. The genetic gain for grain yield, in particular, showed significant variation, ranging from 1.5 to 167.6 kg/ha/year, with a mean value of 36.3 kg/ha/year. This translated into a rate of genetic gain for grain yield ranging from 0.1% to over 3.0%. The impact of multi-trait selection on grain yield was clarified by studies that reported genetic gains for other traits, such as plant height, days to flowering, and grain quality. These findings reveal that while breeding programs have achieved significant gains, further improvements are necessary to meet the growing demand for rice. We also highlight the limitations of these studies, which hinder accurate estimations of genetic gain. In conclusion, we offer suggestions for improving the estimation of genetic gain based on quantitative genetic principles and computer simulations to optimize rice breeding strategies.

Impact of rising temperatures on historical wheat yield, phenology, and grain size in Catalonia.

Introduction: Climate change poses significant challenges to agriculture, impacting crop yields and necessitating adaptive strategies in breeding programs. This study investigates the genetic yield progress of wheat varieties in Catalonia, Spain, from 2007 to 2021, and examines the relationship between genetic yield and climate-related factors, such as temperature. Understanding these dynamics is crucial for ensuring the resilience of wheat crops in the face of changing environmental conditions. Methods: Genetic yield progress was assessed using a linear regression function, comparing the average yield changes of newly released wheat varieties to benchmark varieties. Additionally, a quadratic function was employed to model genetic yield progress in winter wheat (WW). The study also analyzed correlations between genetic yield (GY) and normalized values of hectoliter weight (HLW) and the number of grains (NG) for both spring wheat (SW) and WW. Weather data were used to confirm climate change impacts on temperature and its effects on wheat growth and development. Results: The study found that genetic yield was stagnant for SW but increased linearly by 1.31% per year for WW. However, the quadratic function indicated a possible plateau in WW genetic yield progress in recent years. Positive correlations were observed between GY and normalized values of HLW and NG for both SW and WW. Climate change was evident in Catalonia, with temperatures increasing at a rate of 0.050 °C per year. This rise in temperature had detrimental effects on days to heading (DH) and HLW, with reductions observed in both SW and WW for each °C increase in annual minimum and average temperature. Discussion: The findings highlighted the urgent need to address the impact of climate change on wheat cultivation. The stagnation of genetic yield in SW and the potential plateau in WW genetic yield progress call for adaptive measures. Breeding programs should prioritize phenological adjustments, particularly sowing date optimization, to align with the most favorable months of the year. Moreover, efforts should be made to enhance HLW and the number of grains per unit area in new wheat varieties to counteract the negative effects of rising temperatures. This research underscores the importance of ongoing monitoring and adaptation in agricultural practices to ensure yield resilience in the context of a changing climate.

Optimization Strategies to Adapt Sheep Breeding Programs to Pasture-Based Production Environments: A Simulation Study.

Strong differences between the selection (indoor fattening) and production environment (pasture fattening) are expected to reduce genetic gain due to possible genotype-by-environment interactions (G × E). To investigate how to adapt a sheep breeding program to a pasture-based production environment, different scenarios were simulated for the German Merino sheep population using the R package Modular Breeding Program Simulator (MoBPS). All relevant selection steps and a multivariate pedigree-based BLUP breeding value estimation were included. The reference scenario included progeny testing at stations to evaluate the fattening performance and carcass traits. It was compared to alternative scenarios varying in the progeny testing scheme for fattening traits (station and/or field). The total merit index (TMI) set pasture-based lamb fattening as a breeding goal, i.e., field fattening traits were weighted. Regarding the TMI, the scenario with progeny testing both in the field and on station led to a significant increase in genetic gain compared with the reference scenario. Regarding fattening traits, genetic gain was significantly increased in the alternative scenarios in which field progeny testing was performed. In the presence of G × E, the study showed that the selection environment should match the production environment (pasture) to avoid losses in genetic gain. As most breeding goals also contain traits not recordable in field testing, the combination of both field and station testing is required to maximize genetic gain.

Optimization of breeding program design through stochastic simulation with kernel regression.

In recent years, breeding programs have increased significantly in size and complexity, with various highly interdependent parameters and many contrasting breeding goals. As a result, resource allocation in these programs has become more complex, and deriving an optimal breeding strategy has become increasingly challenging. To address this, a common practice is to reduce the optimization problem to a set of scenarios that differ only in a few parameters and can therefore be analyzed in detail. The goal of this article is to provide a framework for the numerical optimization of breeding programs that goes beyond the simple comparison of scenarios. For this, we first determine the space of potential breeding programs only limited by basic constraints like the budget and housing capacities. Subsequently, the goal is to identify the optimal breeding program by finding the parametrization that maximizes the target function by combining different breeding goals. To assess the value of the target function for a parametrization, we propose using stochastic simulations and the subsequent use of a kernel regression method to cope with the stochasticity of simulation outcomes. This procedure is performed iteratively to narrow down the most promising areas of the search space and perform more and more simulations in these areas of interest. In a simplified example applied to a dairy cattle program, our proposed framework has shown its ability to identify an optimal breeding strategy that aligns with a target function aiming at genetic gain and genetic diversity conservation limited by budget constraints.

Evaluation of Linear Programming and Optimal Contribution Selection Approaches for Long-Term Selection on Beef Cattle Breeding.

The optimized selection method can maximize the genetic gain in offspring under the premise of controlling the inbreeding level of the population. At present, genetic gain has been largely improved by using genomic selection in multiple farm animals. However, the design of the optimal selection method and assessment of its effects during long-term selection in beef cattle breeding are yet to be fully explored. In this study, a simulated beef cattle population was constructed, and 15 generations of simulated breeding were carried out using the linear programming breeding strategy (LP) and optimal contribution selection strategy (OCS), respectively. The truncation selection strategy (TS-I and TS-II) was used as the control. During the breeding process, genetic parameters including genetic gain, average kinship coefficient, QTL effect variance, and average observed heterozygosity were calculated and compared across generations. Our results showed that the LP method can significantly improve the genetic gain in the population, especially the genetic performance of the traits with high heritability and the traits with high weight in the breeding process, but the inbreeding level of the population is higher under LP strategy. Although the genetic gain in the population under the OCS strategy is lower than the TS-II strategy, this method can effectively control the inbreeding level of the population. Our findings also suggest that the LP and OCS method can be used as an effective means to improve genetic gain, while the OCS method is a more ideal method to obtain sustainable genetic gain during long-term selection.

The Potential of Instrumental Insemination for Sustainable Honeybee Breeding.

Mating control is crucial in honeybee breeding and commonly guaranteed by bringing virgin queens to isolated mating stations (IMS) for their nuptial flights. However, most breeding programs struggle to provide sufficiently many IMS. Research institutions routinely perform instrumental insemination of honeybees, but its potential to substitute IMS in breeding programs has not been sufficiently studied. We performed stochastic simulations to compare instrumental insemination strategies and mating on IMS in terms of genetic progress and inbreeding development. We focused on the role of paternal generation intervals, which can be shortened to two years with instrumental insemination in comparison to three years when using IMS. After 70 years, instrumental insemination yielded up to 42% higher genetic gain than IMS strategies-particularly with few available mating sites. Inbreeding rates with instrumental insemination and IMS were comparable. When the paternal generation interval in instrumental insemination was stretched to three years, the number of drone producers required for sustainable breeding was reduced substantially. In contrast, when shortening the interval to two years, it yielded the highest generational inbreeding rates (up to 2.28%). Overall, instrumental insemination with drones from a single colony appears as a viable strategy for honeybee breeding and a promising alternative to IMS.

Comparison of genomic-enabled cross selection criteria for the improvement of inbred line breeding populations.

A crucial step in inbred plant breeding is the choice of mating design to derive high-performing inbred varieties while also maintaining a competitive breeding population to secure sufficient genetic gain in future generations. In practice, the mating design usually relies on crosses involving the best parental inbred lines to ensure high mean progeny performance. This excludes crosses involving lower performing but more complementary parents in terms of favorable alleles. We predicted the ability of crosses to produce putative outstanding progenies (high mean and high variance progeny distribution) using genomic prediction models. This study compared the benefits and drawbacks of 7 genomic cross selection criteria (CSC) in terms of genetic gain for 1 trait and genetic diversity in the next generation. Six CSC were already published, and we propose an improved CSC that can estimate the proportion of progeny above a threshold defined for the whole mating plan. We simulated mating designs optimized using different CSC. The 835 elite parents came from a real breeding program and were evaluated between 2000 and 2016. We applied constraints on parental contributions and genetic similarities between selected parents according to usual breeder practices. Our results showed that CSC based on progeny variance estimation increased the genetic value of superior progenies by up to 5% in the next generation compared to CSC based on the progeny mean estimation (i.e. parental genetic values) alone. It also increased the genetic gain (up to 4%) and/or maintained more genetic diversity at QTLs (up to 4% more genic variance when the marker effects were perfectly estimated).