A multicriteria decision analysis for selecting rainwater harvesting systems in rural areas: a tool for developing countries.

Global water provision challenges have promoted decentralized water supply alternatives such as rainwater harvesting systems (RWHS). RWHS sustainability demands involve social, technical, and economic criteria in planning. Generally, in rural areas, water provision is more complex due to multiple uses of water, scattering of households, and low economies of scale. This research proposes a multicriteria tool for selecting RWHS in rural areas, considering social, technical, and economic criteria. The tool was developed by systematically identifying subcriteria and their hierarchization through the analytical hierarchy process (AHP), the technique for order of preference by similarity to ideal solution (TOPSIS), and a case study validation. Seven subcriteria were identified. The hierarchy of criteria was social (49.7%), technical (26.4%), and economic (23.9%). The tool involved: (i) users' consultation about the perceived ease of use and availability of water sources other than rainwater; (ii) system dimensioning to establish supply size, maintenance requirements, and required water quality; and (iii) costs and benefits estimation. Tool validation in a rural area included the evaluation of the alternatives proposed: (a) alternative 1: potable domestic uses (PD) and non-potable (NPD); (b) alternative 2: PD and NPD, irrigation of crops and chicken farming for self-consumption; and alternative 3: PD and NPD and chicken farming for profit sale. The sensitivity analysis showed the tool's consistency and robustness. Tool validation highlights the importance of integrating the three dimensions in selecting RWHS. The study provides a systematic methodology to assess and prioritize RWHS, appealing to policymakers, engineers, and practitioners facilitating water management and supply processes in rural areas.

Optimizing Harvesting Efficiency: Development and Assessment of a Pneumatic Air Jet Excitation Nozzle for Delicate Biostructures in Food Processing.

This study presents a new pneumatic air jet excitation nozzle, specifically designed for food processing applications. The device, which uses compressed air equipment and a precision solenoid valve, controls air discharge through a parametric air jet nozzle. Tests showed that the device could achieve shooting frequencies in the 40-45 Hz range, with operational pressures between 5 and 7 bar. A sensor system was used to measure the force generated by the device at different frequencies and pressures. Using the Design of Experiments (DOE) methodology, we identified optimal cavity designs for 5 and 6 bar pressures. These designs outperformed others in generating uniform force and maintaining consistent vibration voltage behavior. This highlights the efficacy of our approach in enhancing device performance under different conditions. The device's practical application in food processing was demonstrated, particularly in delicate tasks such as the selective harvesting of sensitive crops like coffee fruits. The precise vibrations generated by the device could potentially enhance harvesting efficiency while significantly reducing mechanical damage to plants. The results position the device as a compelling proof of concept, offering an alternative method for exciting biostructures in food processing. This device opens up new possibilities in agricultural and biological fields, providing a non-intrusive and practical approach to manipulating and interacting with delicate, contactless structures, with a specific focus on improving food processing efficiency and quality.

Effect of Pod Storage and Drying Temperature on Fermentation Dynamics and Final Bean Quality of Cacao Nacional in Ecuador.

The impact of pod storage (PS) and two drying temperatures of fermented cocoa beans was investigated in Ecuador. Therefore, four variations were simultaneously carried out three times at two locations, independently: 0, 3, and 5 days of PS, dried at 60 °C and 0 days of PS, dried at 80 °C. Pod weight during storage, pulp content, pH, temperature, microbial counts, total free amino acids, protein profiles, sugars, organic acids, cut-test, fermentation index, and sensory profiles were analyzed. Minor differences in fermentation dynamics and bean quality were found between variations with and without PS. A rather accelerated fermentation with pod-stored beans was observed (e.g., faster color change, slightly lower pH in cotyledon after 48 h), along with a significantly higher maximal temperature during 24-42 h (43.1 ± 3.2 °C compared to 39.2 ± 2.0 °C without PS). More well-fermented beans were reached with PS (52.3 ± 22.6%) than without (62.7 ± 9.2%). Differences during fermentation were observed between the locations (e.g., pH, acids, sugars), but sensory evaluation indicated that the impact of location was mitigated with PS. Drying at 80 °C showed no adverse effects, as evidenced by the results of the cut-test and fermentation index. However, sensory evaluations revealed significant differences between 80 °C and 60 °C, with the former exhibiting more bitter and astringent cocoa liquor.

Assessment of Triboelectric Nanogenerators for Electric Field Energy Harvesting.

Electric-field energy harvesters (EFEHs) have emerged as a promising technology for harnessing the electric field surrounding energized environments. Current research indicates that EFEHs are closely associated with Tribo-Electric Nano-Generators (TENGs). However, the performance of TENGs in energized environments remains unclear. This work aims to evaluate the performance of TENGs in electric-field energy harvesting applications. For this purpose, TENGs of different sizes, operating in single-electrode mode were conceptualized, assembled, and experimentally tested. Each TENG was mounted on a 1.5 HP single-phase induction motor, operating at nominal parameters of 8 A, 230 V, and 50 Hz. In addition, the contact layer was mounted on a linear motor to control kinematic stimuli. The TENGs successfully induced electric fields and provided satisfactory performance to collect electrostatic charges in fairly variable electric fields. Experimental findings disclosed an approximate increase in energy collection ranging from 1.51% to 10.49% when utilizing TENGs compared to simple EFEHs. The observed correlation between power density and electric field highlights TENGs as a more efficient energy source in electrified environments compared to EFEHs, thereby contributing to the ongoing research objectives of the authors.

Eco-friendly, compact, and cost-efficient triboelectric nanogenerator for renewable energy harvesting and smart motion sensing.

In recent years, the growth of Internet of Things devices has increased the use of sustainable energy sources. An alternative technology is offered by triboelectric nanogenerators (TENGs) that can harvest green energy and convert it into electrical energy. Herein, we assessed three different nopal powder types that were used as triboelectric layers of eco-friendly and sustainable TENGs for renewable energy harvesting from environmental vibrations and powering electronic devices. These nanogenerators were fabricated using waste and recycled materials with a compact design for easy transportation and collocation on non-homogeneous surfaces of different vibration or motion sources. In addition, these TENGs have advantages such as high output performance, stable output voltage, lightweight, low-cost materials, and a simple fabrication process. These nanogenerators use the contact-separation mode between two triboelectric layers to convert the vibration energy into electrical energy. TENG with the best output performance is based on dehydrated nopal powder, generating an output power density of 2.145 mWm-2 with a load resistance of 39.97 MΩ under 3g acceleration and 25 Hz operating frequency. The proposed TENGs have stable output voltages during 22500 operating cycles. These nanogenerators can light 116 ultra-bright blue commercial LEDs and power a digital calculator. Also, the TENGs can be used as a chess clock connected to a mobile phone app for smart motion sensing. These nanogenerators can harvest renewable vibration energy and power electronic devices, sensors, and smart motion sensing.

Aspectos económicos del aprovechamiento de los huevos de parlama Lepidochelys olivacea (Eschscholtz, 1829): de las cuotas de conservación hacia la sostenibilidad / Economic aspects of the use of olive ridley eggs Lepidochelys olivaceae (Eschscholtz, 1829): from conservation quotas towards sustainability

En Guatemala, los huevos de tortuga parlama son aprovechados para su comercialización. El esquema de conservación se basa en un sistema de cuotas, en la que se establece que el 20% de los huevos recolectados deberán ser entregados a un tortugario registrado. Se estima que alrededor de 673,304 huevos son puestos por año en la Costa Pacífica con un valor en playa aproximado de Q1,124,869.00. En Guatemala, el aprovechamiento de huevos de tortuga funciona como un amortiguador clave en las economías de las comunidades. En los últimos años, la compra de huevos por parte de los tortugarios ha aumentado. Estos criaderos, además de recibir la cuota de conservación, compran el resto de la carga de huevos del nido. Como resultado, el número de nidos plantados en los tortugarios también ha aumentado. Sin embargo, esto también ha provocado que haya un mercado mas grande para los huevos de tortuga. La venta de huevos se ha convertido en una fuente de ingresos muy exitosa con menos riesgo y costos que la pesca. Esto ha llevado a algunos pescadores artesanales a cambiar a la recolección de huevos como su actividad principal. Es necesario evaluar los esquemas de conservación actuales y la efectividad de los incentivos de manera integral, tomando en cuenta impactos ambientales, rentabilidad y efectos sociales. El presente análisis aporta información útil para identificar la calidad de los incentivos, para poder reformar o eliminar los incentivos ineficientes o perversos, de manera que los escasos recursos de conservación se puedan invertir de la manera más efectiva

In Guatemala, olive ridley sea turtle (Lepidochelys olivacea) eggs are harvested. The conservation scheme is based Modelo de publicación sin fines de lucro para conservar la naturaleza académica y abierta de la comunicación científica on a quota system, which requires that 20% of the collected eggs be delivered to a registered turtle nursery. It is estimated that approximately 673,304 eggs are laid annually on the Pacific coast, with an approximate beach value of Q1,124,869.00. In Guatemala, the harvesting of turtle eggs serves as a key buffer in the economies of coastal communities. In recent years, the purchase of eggs by turtle nurseries has increased. These nurseries, in addition to receiving the conservation fee, buy the rest of the load of eggs from the nest. As a result, the number of planted nests in nurseries has also increased. However, this has also led to a larger market for turtle eggs. The sale of eggs. The sale of eggs has become a highly successful source of income, with fewer risks and costs than fishing. This has led some artisanal fishermen to switch to egg collection as their main activity. This analysis provides useful infromation for identifying the quality of incentives, in order to reform or elinate inefficient or perverse incentives, so that scarce conservation resource will allow for the identification of the quality of the incentives, aiming to reform or eliminate inefficient or perverse incentives so that scarce conservation resources can be invested in the most effective way

Clinging fauna associated with nearshore pelagic sargassum rafts in the Eastern Caribbean: Implications for coastal in-water harvesting.

Tropical Atlantic blooms of pelagic Sargassum species are associated with severe inundation events along the coasts of Caribbean and West African nations that cause extensive ecological and socioeconomic harm. The use of in-water harvesting as a management strategy avoids the plethora of challenges associated with shoreline inundations. Moreover, with a growing interest in the valorisation of this raw material, in-water harvesting provides the best opportunity to collect substantial amounts of 'fresh' sargassum that can be used in a variety of applications. However, in-water harvesting of sargassum will remove organisms associated with the floating habitat, resulting in loss of biodiversity, thus creating a potential management dilemma. To address this management concern, we assessed the clinging fauna associated with sargassum rafts at various distances from shore. From a total of 119 dipnet samples of sargassum, we recorded 18 taxa, across 6 phyla (Arthropoda, Mollusca, Chordata, Platyhelminthes, Nemathelminthes, Annelida) with the phylum Arthropoda being the most speciose (n = 10). Our multivariate and model selection analyses support that distance from shore and season are the most important drivers of variability in community composition and that season is the most important driver of individual abundance and number of taxa across samples. Overall, rafts within 0-3000 m of the shoreline of Barbados harbored low biodiversity and were dominated by small invertebrates (mean size: 5.5 mm) of no commercial value. Results suggest that biodiversity trade-offs associated with in-water sargassum harvesting in coastal areas are likely to be negligible.

Spatial distribution of degradation and deforestation of palm swamp peatlands and associated carbon emissions in the Peruvian Amazon.

The vast peat deposits in the Peruvian Amazon are crucial to the global climate. Palm swamp, the most extensive regional peatland ecosystem faces different threats, including deforestation and degradation due to felling of the dominant palm Mauritia flexuosa for fruit harvesting. While these activities convert this natural C sink into a source, the distribution of degradation and deforestation in this ecosystem and related C emissions remain unstudied. We used remote sensing data from Landsat, ALOS-PALSAR, and NASA's GEDI spaceborne LiDAR-derived products to map palm swamp degradation and deforestation within a 28 Mha area of the lowland Peruvian Amazon in 1990-2007 and 2007-2018. We combined this information with a regional peat map, C stock density data and peat emission factors to determine (1) peatland C stocks of peat-forming ecosystems (palm swamp, herbaceous swamp, pole forest), and (2) areas of palm swamp peatland degradation and deforestation and associated C emissions. In the 6.9 ± 0.1 Mha of predicted peat-forming ecosystems within the larger 28 Mha study area, 73% overlaid peat (5.1 ± 0.9 Mha) and stored 3.88 ± 0.12 Pg C. Degradation and deforestation in palm swamp peatlands totaled 535,423 ± 8,419 ha over 1990-2018, with a pronounced dominance for degradation (85%). The degradation rate increased 15% from 15,400 ha y-1 (1990-2007) to 17,650 ha y-1 (2007-2018) and the deforestation rate more than doubled from 1,900 ha y-1 to 4,200 ha y-1. Over 1990-2018, emissions from degradation amounted to 26.3 ± 3.5 Tg C and emissions from deforestation were 12.9 ± 0.5 Tg C. The 2007-2018 emission rate from both biomass and peat loss of 1.9 Tg C yr-1 is four times the average biomass loss rate due to gross deforestation in 2010-2019 reported for the hydromorphic Peruvian Amazon. The magnitude of emissions calls for the country to account for deforestation and degradation of peatlands in national reporting.

Economic attractiveness of domestic rainwater harvesting in Brazilian cities.

Brazil is the fifth largest country by area in the world, with a variety of climates in its territory. This work assesses the economic attractiveness of domestic rainwater harvesting direct feed systems, for the replacement of non-drinking water, in 148 locations of the Brazilian territory considering hourly rainfall data for the 14-year period between 2008 and 2021. The water tariff and consumption data for each location were also considered along with estimated hourly and monthly consumption patterns. With annual operating expenses at 1% of the capital expenditure and an annual discount rate of 8%, the net present value for the 14-year period is positive in only 15 locations, which are among those with the highest water tariffs in the country. The results of these base case simulations discourage the installation of domestic RWH systems in most of the Brazilian locations considered. However, the results also show that, depending on house occupancy, filtration equipment cost, water tariff, and catchment area, outcomes more favorable to the installation of RWH systems are obtained, especially in cities of Brazil's southern and southeastern regions.

Influence of different growing stages of whole-plant soybeans on their nutrient content and silage quality for cattle.

The objective of this study was to determine the effects of growing stage (GS) on morphological and chemical composition of whole-plant soybean (WPS), and fermentative profile and chemical composition of whole-plant soybean silage (SS). This study was divided into two trials conducted in a complete randomised block design. The first trial evaluated the effect of GS from R1 to R8 (59-135 d after sowing) on morphological and chemical composition of WPS and its botanical components. The second trial determined the effects of GS from R3 (71 d after sowing) to R7 (124 d after sowing) on dry matter (DM) losses, fermentative profile, chemical composition and aerobic stability of SS. The proportion of leaves in WPS was reduced, while stem and pod proportions were increased as the GS progressed. Ensiling WPS at R6 and R7 decreased the contents of acetic acid, lactic acid and branched-chain fatty acids, and ethanol, and increased the contents of propionic acid and NH3-N. However, silage butyric acid concentrations in R6 and R7 were relatively high (18.1 and 19.9 g/kg DM, respectively). Butyric acid and buffering capacity varied according to GS with the lowest values observed in silages derived from GS R3, R5 and R7, and the highest values observed in silages made from GS R5. Later GS resulted in greater contents of DM, crude protein and ether extract, and lower contents of acid detergent fibre and non-fibre carbohydrate in SS. The high fat of SS produced from later GS limits high inclusion levels in ruminant diets. Morphological components impacted chemical composition of SS, whereas the R7 stage improved fermentative profile and resulted in an SS with greater in situ degradability of DM and neutral detergent fibre.

Densification of Synechococcus subsalsus biomass by chitosan coagulation for biogas production.

This study evaluated the coagulation/flocculation process using chitosan as a natural coagulant to concentrate suspensions of the cyanobacterium Synechococcus subsalsus and enable biogas production from concentrated biomass. The chitosan performance was tested and compared with the inorganic ferric chloride (FeCl3) coagulant. Using the liquid fraction of the coagulation/flocculation process in subsequent biomass cultivations proved viable, with similar growths in culture media with up to 80% of the liquid fraction. At pH 6 and 400 mg/L FeCl3, the biomass concentrated almost seven times, increasing the total suspended solids (TSS) of the suspension from 0.4-0.6 g/L to 2.6-4.0 g/L. With 80 mg/L chitosan and pH 7, the TSS concentration attained values in the range of 7.0-9.7 g/L, an increase of more than 30 times, clearly showing that chitosan has a much higher capacity for biomass concentration at a lower concentration. A ratio of 0.3 g chitosan/g dry mass of the biomass was established to reach the maximum densification. The production of methane from chitosan-densified biomass proved to be feasible. Chitosan-densified biomass showed a two-phase cumulative methane production when digested, with slower methane production and 23% lower methane yield after 30 days of digestion (207 NmL CH4/g CODi) compared to the biomass from cultivation (non-densified, 270 NmL CH4/g CODi). However, optimizing the digestion conditions of the densified biomass should increase the methane yield and reduce process time.

Quantum Entanglement and State-Transference in Fenna-Matthews-Olson Complexes: A Post-Experimental Simulation Analysis in the Computational Biology Domain.

Fenna-Mathews-Olson complexes participate in the photosynthetic process of Sulfur Green Bacteria. These biological subsystems exhibit quantum features which possibly are responsible for their high efficiency; the latter may comprise multipartite entanglement and the apparent tunnelling of the initial quantum state. At first, to study these aspects, a multidisciplinary approach including experimental biology, spectroscopy, physics, and math modelling is required. Then, a global computer modelling analysis is achieved in the computational biology domain. The current work implements the Hierarchical Equations of Motion to numerically solve the open quantum system problem regarding this complex. The time-evolved states obtained with this method are then analysed under several measures of entanglement, some of them already proposed in the literature. However, for the first time, the maximum overlap with respect to the closest separable state is employed. This authentic multipartite entanglement measure provides information on the correlations, not only based on the system bipartitions as in the usual analysis. Our study has led us to note a different view of FMO multipartite entanglement as tiny contributions to the global entanglement suggested by other more basic measurements. Additionally, in another related trend, the initial state, considered as a Förster Resonance Energy Transfer, is tracked using a novel approach, considering how it could be followed under the fidelity measure on all possible permutations of the FMO subsystems through its dynamical evolution by observing the tunnelling in the most probable locations. Both analyses demanded significant computational work, making for a clear example of the complexity required in computational biology.

Ultrasonic Energy and Data Transfer through a Metal-Liquid Multi-Layer Channel Enhanced by Automatic Gain and Carrier Control.

Ultrasonic communication and power transfer are attractive solutions when conventional electromagnetic-based or wired connections are unfeasible. Most ultrasonic communication applications concern a single-solid barrier. Nevertheless, some relevant scenarios can be composed of several fluid-solid media, through which communication and power transfer are intended. Due to its multi-layer nature, insertion loss and, consequently, the system efficiency considerably decrease. This paper presents an ultrasonic system capable of simultaneously power transferring and transmitting data through a set of two flat steel plates separated by a fluid layer using a pair of co-axially aligned piezoelectric transducers on opposite sides of the barrier. The system is based on frequency modulation and adopts a novel technique for automatic gain and automatic carrier control. The modems used herein were developed specifically for this application, rendering the system able to transfer data at a rate of 19,200 bps, using the frequency shift keying (FSK) modulation scheme and simultaneously transferring 66 mW of power through two flat steel plates (5 mm) separated by a fluid layer (100 mm), which completely supplied a pressure and temperature sensor. The proposed automatic gain control allowed a higher data transmission rate and the automatic carrier control reduced power consumption. The former reduced the transmission error from 12% to 5%, while the latter reduced the global power consumption from 2.6 W to 1.2 W. The proposed system is promising for monitoring applications such as oil wellbore structural health monitoring systems.

MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications.

Due to its superior advantages in terms of electronegativity, metallic conductivity, mechanical flexibility, customizable surface chemistry, etc., 2D MXenes for nanogenerators have demonstrated significant progress. In order to push scientific design strategies for the practical application of nanogenerators from the viewpoints of the basic aspect and recent advancements, this systematic review covers the most recent developments of MXenes for nanogenerators in its first section. In the second section, the importance of renewable energy and an introduction to nanogenerators, major classifications, and their working principles are discussed. At the end of this section, various materials used for energy harvesting and frequent combos of MXene with other active materials are described in detail together with the essential framework of nanogenerators. In the third, fourth, and fifth sections, the materials used for nanogenerators, MXene synthesis along with its properties, and MXene nanocomposites with polymeric materials are discussed in detail with the recent progress and challenges for their use in nanogenerator applications. In the sixth section, a thorough discussion of the design strategies and internal improvement mechanisms of MXenes and the composite materials for nanogenerators with 3D printing technologies are presented. Finally, we summarize the key points discussed throughout this review and discuss some thoughts on potential approaches for nanocomposite materials based on MXenes that could be used in nanogenerators for better performance.

Study of the Electronic Interaction between NiO and Short Polythiophene Chains towards Solar Photon Harvesting.

The sustainable production of energy is a field of interest to which a new requirement is now imposed: the need to be respectful of the environment. New materials and techniques are being developed, but environmental concerns impose the necessity of keeping research active towards the development of green energy. For this reason, we present the study of short polythiophene (PTh) chains (three and five monomers) and their interaction with nickel oxide, looking for properties related to solar photon harvesting in order to produce electricity. The models of the molecules were developed, and the calculations were performed with an M11-L meta-GGA functional, specially developed for electronic structure calculations. The theoretical explorations demonstrated that the geometry of the PTh molecules suffer little distortion when interacting with the NiO molecule. The calculated value of Eg lies between 2.500 and 0.412 eV for a three-ring PTh chain and between 1.944 and 0.556 eV for a five-ring PTh chain. The chemical parameters indicated that, depending on the geometry of the system, the chemical potential varies from 81.27 to 102.38 kcal/mol and the highest amount of electronic charge varies from -2.94 to 21.56 a.u. for three-monomer systems. For five-monomer systems, the values lie within similar ranges as those of the three-monomer systems. The Partial Density of States (PDOS) showed that the valence and conduction electronic bands were composed of states in the NiO and PTh rings, except for a system where there was a non-bonding interaction.

A Portable Triboelectric Nanogenerator Based on Dehydrated Nopal Powder for Powering Electronic Devices.

Triboelectric nanogenerators (TENGs) based on organic materials can harvest green energy to convert it into electrical energy. These nanogenerators could be used for Internet-of-Things (IoT) devices, substituting solid-state chemical batteries that have toxic materials and limited-service time. Herein, we develop a portable triboelectric nanogenerator based on dehydrated nopal powder (NOP-TENG) as novel triboelectric material. In addition, this nanogenerator uses a polyimide film tape adhered to two copper-coated Bakelite plates. The NOP-TENG generates a power density of 2309.98 µW·m-2 with a load resistance of 76.89 MΩ by applying a hand force on its outer surface. Furthermore, the nanogenerator shows a power density of 556.72 µW·m-2 with a load resistance of 76.89 MΩ and under 4g acceleration at 15 Hz. The output voltage of the NOP-TENG depicts a stable output performance even after 27,000 operation cycles. This nanogenerator can light eighteen green commercial LEDs and power a digital calculator. The proposed NOP-TENG has a simple structure, easy manufacturing process, stable electric behavior, and cost-effective output performance. This portable nanogenerator may power electronic devices using different vibration energy sources.

Development of a Pavement-Embedded Piezoelectric Harvester in a Real Traffic Environment.

Road pavements are spread over large areas and convey various possibilities for energy sources such as high thermal gradients due to their materials and colors, wind corridors, large flat areas for solar harvesting, and heavy loading from traffic. The latest advances in road energy generation have been discretely implemented and have mainly focused on photovoltaic surface applications; other studies have explored the use of piezoelectric transducers with high stresses for better energy-production performance but limited life span. This study explores the stresses on pavement surfaces from traffic loading shockwaves that yield to the natural frequency vibration a piezoelectric harvester using a cantilever array. The passing vehicles triggered 16 piezoelectric sensors divided into four embedded steel profiles. The peak electrical power obtained in the experiment was 55.6 µW with a single transducer using a tip mass of 16 g. The proposed harvester demonstrated potential for applications in micro-generation of energy with limited infrastructure modification and high endurance under traffic loading over time. Its generation capacity is around 50 mWh a month with 16 piezoelectric cantilevers installed (for a commercial traffic volume of 1500 vehicles a day), enough to power a 200 m flashing LED raised marker strip to guide drivers for lane alignment during night shifts.

Experience acquired after 34 years of the first heart transplantation in Mexico.

On July 21, 1988, a successful heart transplant was carried out for the first time in Mexico; 34 years later, several hospitals in the country have performed this procedure. We present information and comments on the results obtained within this period at Mexican Social Security Institute La Raza National Medical Center "Dr. Gaudencio González Garza" General Hospital, where 234 transplants have been performed (one out of every three carried out throughout the country), with a short- and mid-term survival comparable to that reported in the rest of the world. This hospital is the only center that performs simultaneous heart-kidney transplantation and elective heart re-transplantation, with favorable results.

El 21 de julio de 1988, en México se realizó con éxito el primer trasplante de corazón; 34 años después, diversos centros hospitalarios del país efectúan este procedimiento. Aquí se presenta información y comentarios de los resultados obtenidos en este periodo en el Hospital General "Dr. Gaudencio González Garza", Centro Médico Nacional La Raza, Instituto Mexicano del Seguro Social, donde se han llevado a cabo 234 trasplantes (uno de cada tres efectuados en el país), con una supervivencia a corto y mediano plazo equiparable a la reportada en el resto del mundo. Ese hospital es el único centro que realiza trasplante simultá de corazón-riñón y retrasplante cardiaco electivo, con resultados favorables.

Environmental Sensing in High-Altitude Mountain Ecosystems Powered by Sedimentary Microbial Fuel Cells.

The increasing need for fresh water in a climate change scenario requires remote monitoring of water bodies in high-altitude mountain areas. This study aimed to explore the feasibility of SMFC operation in the presence of low dissolved oxygen concentrations for remote, on-site monitoring of physical environmental parameters in high-altitude mountainous areas. The implemented power management system (PMS) uses a reference SMFC (SMFCRef) to implement a quasi-maximum power point tracking (quasi-MPPT) algorithm to harvest energy stably. As a result, while transmitting in a point-to-point wireless sensor network topology, the system achieves an overall efficiency of 59.6%. Furthermore, the control mechanisms prevent energy waste and maintain a stable voltage despite the microbial fuel cell (MFC)'s high impedance, low time response, and low energy production. Moreover, our system enables a fundamental understanding of environmental systems and their resilience of adaptation strategies by being a low-cost, ecological, and environmentally friendly alternative to power-distributed and dynamic environmental sensing networks in high-altitude mountain ecosystems with anoxic environmental conditions.

La experiencia adquirida a 34 años del primer trasplante de corazón en México / Experience acquired after 34 years of the first heart transplantation in Mexico

Resumen El 21 de julio de 1988, en México se realizó con éxito el primer trasplante de corazón; 34 años después, diversos centros hospitalarios del país efectúan este procedimiento. Aquí se presenta información y comentarios de los resultados obtenidos en este periodo en el Hospital General "Dr. Gaudencio González Garza", Centro Médico Nacional La Raza, Instituto Mexicano del Seguro Social, donde se han llevado a cabo 234 trasplantes (uno de cada tres efectuados en el país), con una supervivencia a corto y mediano plazo equiparable a la reportada en el resto del mundo. Ese hospital es el único centro que realiza trasplante simultáneo de corazón-riñón y retrasplante cardiaco electivo, con resultados favorables.

Abstract On July 21, 1988, a successful heart transplant was carried out for the first time in Mexico; 34 years later, several hospitals in the country have performed this procedure. We present information and comments on the results obtained within this period at Mexican Social Security Institute La Raza National Medical Center "Dr. Gaudencio González Garza" General Hospital, where 234 transplants have been performed (one out of every three carried out throughout the country), with a short- and mid-term survival comparable to that reported in the rest of the world. This hospital is the only center that performs simultaneous heart-kidney transplantation and elective heart re-transplantation, with favorable results.