Inhibiting dissolution strategy achieving high-performance sodium titanium phosphate hybrid anode in seawater-based dual-ion battery.

Aqueous sodium-ion batteries (ASIBs) show great promise as candidates for large-scale energy storage. However, the potential of ASIB is impeded by the limited availability of suitable anode types and the occurrence of dissolution side reactions linked to hydrogen evolution. In this study, we addressed these challenges by developing a Bi-coating modified anode based on a sodium titanium phosphate (NTP)-carbon fibers (CFs) hybrid electrode (NTP-CFs/Bi). The Bi-coating effectively mitigates the localized enrichment of hydroxyl anion (OH-) near the NTP surface, thus addressing the dissolution issue. Notably, the Bi-coating not only restricts the local abundance of OH- to inhibit dissolution but also ensures a higher capacity compared with other NTP-based anodes. Consequently, the NTP-CFs/Bi anode demonstrates an impressive specific capacity of 216.8 mAh/g at 0.2 mV/s and maintains a 90.7 % capacity retention after 1000 cycles at 6.3 A/g. This achievement sets a new capacity record among NTP-based anodes for sodium storage. Furthermore, when paired with a cathode composed of hydroxy nickel oxide directly grown on Ni foam, we assembled a seawater-based cell exhibiting high energy and power densities, surpassing the most recently reported ASIBs. This groundbreaking work lays the foundation for a potential method to develop long-life NTP-based anodes.

Chemico-nutritional characterization and anti-inflammatory potential of Chirabilva (Holoptelea integrifolia Roxb.) seed: alternate source of protein supplement and fatty acids.

Exploring unconventional protein sources can be an alternative strategy to meet the deficiency. The seeds of Chirabilva (Holoptelea integrifolia Roxb., Family- Ulmaceae) are eaten raw by the ethnic communities of Southeast Asian countries. The present study assessed the chemical, nutritional, and biological potential of the seeds (HIS) and pericarp (HISP) of H. integrifolia. The seeds contain mainly fixed and very few essential oils. The fixed oil of HIS is composed primarily of unsaturated oleic (47%) and saturated palmitic (37%) acids. The HIS are exceptional due to a high content of lipid (50%), protein (24%), carbohydrates (19%), fiber (4%), and anti-nutritional components within permissible limits. The high content (in mg/Kg) of phosphorus (6000), magnesium (422), Calcium (279), and essential nutrients (Ni, Co, Zn, Fe, Cu, Mn, and Cr) in the range of (0.04-6.69) were observed. The moderate anti-oxidant potential of HISP was evident in single electron transfer in-vitro assays. Moreover, HISP extract and HIS solvent-extracted fixed oil showed anti-inflammatory action in lipopolysaccharide-induced HaCaT cells by significantly attenuating pro-inflammatory cytokines (TNF-α) without causing cytotoxicity. Results support de-oiled HIS cake as an alternative source of a high-protein diet and its oil with anti-inflammatory attributes for topical applications.

A Proposed Device for Controlling the Flow of Information Based on Weyl Fermions.

In this work we propose a novel device for controlling the flow of information using Weyl fermions. Based on a previous work by our group, we show that it is possible to fully control the flow of Weyl fermions on several different channels by applying an electric field perpendicular to the direction of motion of the particles on each channel. In this way, we can transmit information as logical bits, depending on the existence or not of a Weyl current on each channel. We also show that the response time of this device is exceptionally low, less than 1 ps, for typical values of its parameters, allowing for the control of the flow of information at extremely high rates of the order of 100 Petabits per second. Alternatively, this device could also operate as an electric field sensor. In addition, we demonstrate that Weyl fermions can be efficiently guided through the proposed device using appropriate magnetic fields. Finally, we discuss some particularly interesting remarks regarding the electromagnetic interactions of high-energy particles.

Neutron dose evaluation inside high-energy accelerator irradiation vault using LR-115.

Recently, a new radiation therapy using a high-energy accelerator irradiation vault has attracted significant attention. This therapy is very effective in destroying cancer cells because it uses much higher energy than conventional radiation therapy. Nevertheless, it also has disadvantages due to its high energy and dose, resulting in the generation of secondary radiation such as X-rays and neutrons. In particular, neutrons have a higher radiation weighting factor than photons; therefore, they are more harmful to normal tissues. However, the popular neutron dosimeter CR-39 cannot evaluate high-dose neutrons. This paper proposes a novel method for measuring high-dose neutrons generated during cancer treatment. LR-115, which has low detection efficiency but is expected to be useful for evaluating high-dose neutrons, was used to evaluate the effective dose of neutrons in a high-energy accelerator irradiation room. The results were verified using MCNP 6.2, a Monte Carlo-based particle transport code. This study provides the lower limit for evaluating neutron effective dose using LR-115. The experimental results showed that the neutron effective dose increased linearly with beam current. These findings provide basic data for evaluating neutron effective dose for radiation protection.

Synthesis, Characterization and Energetic Properties of Hydroxymethyl-Bishomocubanone Derivatives.

The present work reports synthesis, characterization and theoretical insights on novel hydroxymethyl-bishomocubanone derivatives. Twelve new bishomocubanes (BHCs) were synthesized and fully characterized by various spectroscopic techniques and single crystal X-ray analysis. The densities of the title compounds were found in the range of 1.34-1.59 g/cm3. Density-functional theory (DFT) based calculations at B3LYP/6-311++G(d,p) level of theory were performed on  ten selected BHC based cage compounds. Propulsive and ballistic properties of newly synthesized hydroxymethyl-bishomocubanone derivatives in solid and liquid propulsion systems were calculated, and the results suggested that these compounds are superior to conventional fuel RP1 and binder HTPB. The detonation parameters revealed that these compounds are not explosive in nature and safe to use as solid propellants. Furthermore, kinetic and thermal stabilities of the title compounds were determined by HOMO-LUMO energy gap, ESP maps, impact sensitivity (h50) and bond dissociation energies (BDEs) followed by thermogravimetric analysis (TGA) and differential thermogravimetry analysis (DTA). Three compounds, a dinitroazide (Isp,vac= 310.98s), a dinitrate (Isp,vac = 309.51s), and a dinitronitrate (Isp,vac= 309.20s) were found to be excellent candidates for volume limited applications.

VHEE FLASH sparing effect measured at CLEAR, CERN with DNA damage of pBR322 plasmid as a biological endpoint.

Ultra-high dose rate (UHDR) irradiation has been shown to have a sparing effect on healthy tissue, an effect known as 'FLASH'. This effect has been studied across several radiation modalities, including photons, protons and clinical energy electrons, however, very little data is available for the effect of FLASH with Very High Energy Electrons (VHEE). pBR322 plasmid DNA was used as a biological model to measure DNA damage in response to Very High Energy Electron (VHEE) irradiation at conventional (0.08 Gy/s), intermediate (96 Gy/s) and ultra-high dose rates (UHDR, (2 × 109 Gy/s) at the CERN Linear Electron Accelerator (CLEAR) user facility. UHDRs were used to determine if the biological FLASH effect could be measured in the plasmid model, within a hydroxyl scavenging environment. Two different concentrations of the hydroxyl radical scavenger Tris were used in the plasmid environment to alter the proportions of indirect damage, and to replicate a cellular scavenging capacity. Indirect damage refers to the interaction of ionising radiation with molecules and species to generate reactive species which can then attack DNA. UHDR irradiated plasmid was shown to have significantly reduced amounts of damage in comparison to conventionally irradiated, where single strand breaks (SSBs) was used as the biological endpoint. This was the case for both hydroxyl scavenging capacities. A reduced electron energy within the VHEE range was also determined to increase the DNA damage to pBR322 plasmid. Results indicate that the pBR322 plasmid model can be successfully used to explore and test the effect of UHDR regimes on DNA damage. This is the first study to report FLASH sparing with VHEE, with induced damage to pBR322 plasmid DNA as the biological endpoint. UHDR irradiated plasmid had reduced amounts of DNA single-strand breaks (SSBs) in comparison with conventional dose rates. The magnitude of the FLASH sparing was a 27% reduction in SSB frequency in a 10 mM Tris environment and a 16% reduction in a 100 mM Tris environment.

An Ultralight Composite Current Collector Enabling High-Energy-Density and High-Rate Anode-Free Lithium Metal Battery.

Anode-free lithium (Li) metal batteries are promising alternatives to current Li-ion batteries due to their advantages such as high energy density, low cost, and convenient production. However, the copper (Cu) current collector accounts for more than 25 wt% of the total weight of the anode-free battery without capacity contribution, which severely reduces the energy and power densities. Here, a new family of ultralight composite current collectors with a low areal density of 0.78 mg cm-2, representing significant weight reduction of 49%-91% compared with the Cu-based current collectors for high-energy Li batteries, is presented. Rational molecular engineering of the polyacylsemicarbazide substrate enables enhanced interfacial interaction with the sputtered Cu layer, which results in excellent interfacial stability, flexibility, and safety for the obtained anode-free batteries. The battery-level energy density has been significantly improved by 36%-61%, and a maximum rate capability reaches 5 C (10 mA cm-2) attributed to the homogeneous Li+ flux and smooth Li deposition on the nanostructured Cu layer. The results not only open a new avenue to improve the energy and power densities of anode-free batteries via composite current collector innovation but, in a broader context, provide a new paradigm to pursue high-performance, high-safety, and flexible batteries.

Zwitterionic Energetic Materials: Synthesis, Structural Diversity and Energetic Properties.

Zwitterionic compounds are an emergent class of energetic materials and have gained synthetic interest of many in the recent years. Due to their better packing efficiencies and strong inter/intramolecular electrostatic interactions, they often ensue superior energetic properties than their salt analogues. A systematic review from the perspective of design, synthesis, and physicochemical properties evaluation of the zwitterionic energetic materials is presented. Depending on the parent ring(s) used for the synthesis and the type of moieties bearing positive and negative charges, different classes of energetic materials, such as primary explosives, secondary explosives, heat resistant explosives, oxidizers, etc., may result. The properties of some of the energetic zwitterionic compounds are also compared with analogous energetic salts. This review will encourage readers to explore the possibility of designing new zwitterionic energetic materials.

Doping Engineering in Electrode Material for Boosting the Performance of Sodium Ion Batteries.

In recent years, sodium ion batteries (SIBs) emerged as promising alternative candidates for lithium ion batteries (LIBs) due to the high abundance and low cost of sodium resources. However, their commercialization has been hindered by inherent limitations, such as low energy density and poor cycling stability. To address these issues, doping methodology is one of the most promising approaches to boosting the structural and electrochemical properties of SIB electrodes. This review provides a comprehensive overview of recent advancements in doping strategies, focusing on the improvement of the performance of SIBs. Various dopants including s- and p-block elements, transition metals, oxides, carbonaceous materials, and many more dopants are discussed in terms of their effects on enhancing the electrochemical properties of SIBs. Furthermore, the mechanisms responsible for the improvement in the performance of doped SIBs materials are also discussed. It also highlights the importance of doping sites in the crystal lattice, which also play a crucial role in doping in optimizing electrode structure, enhancing ion diffusion kinetics, and stabilizing electrode/electrolyte interfaces. The review ends by looking at the recent studies in simultaneous multiple heteroatom doping, offering valuable perspectives for a high performance SIB. This study provides valuable insight into the researchers and battery industries striving for advancements in energy storage technologies.

High-accuracy measurement, advanced theory and analysis of the evolution of satellite transitions in manganese Kα using XR-HERFD.

Here, the novel technique of extended-range high-energy-resolution fluorescence detection (XR-HERFD) has successfully observed the n = 2 satellite in manganese to a high accuracy. The significance of the satellite signature presented is many hundreds of standard errors and well beyond typical discovery levels of three to six standard errors. This satellite is a sensitive indicator for all manganese-containing materials in condensed matter. The uncertainty in the measurements has been defined, which clearly observes multiple peaks and structure indicative of complex physical quantum-mechanical processes. Theoretical calculations of energy eigenvalues, shake-off probability and Auger rates are also presented, which explain the origin of the satellite from physical n = 2 shake-off processes. The evolution in the intensity of this satellite is measured relative to the full Kα spectrum of manganese to investigate satellite structure, and therefore many-body processes, as a function of incident energy. Results demonstrate that the many-body reduction factor S02 should not be modelled with a constant value as is currently done. This work makes a significant contribution to the challenge of understanding many-body processes and interpreting HERFD or resonant inelastic X-ray scattering spectra in a quantitative manner.

Lightweight Electrolyte Design for Li/Sulfurized Polyacrylonitrile (SPAN) Batteries.

Sulfurized polyacrylonitrile (SPAN) recently emerges as a promising cathode for high-energy lithium (Li) metal batteries owing to its high capacity, extended cycle life, and liberty from costly transition metals. As the high capacities of both Li metal and SPAN lead to relatively small electrode weights, the weight and specific energy density of Li/SPAN batteries are particularly sensitive to electrolyte weight, highlighting the importance of minimizing electrolyte density. Besides, the large volume changes of Li metal anode and SPAN cathode require inorganic-rich interphases that can guarantee intactness and protectivity throughout long cycles. This work addresses these crucial aspects with an electrolyte design where lightweight dibutyl ether (DBE) is used as a diluent for concentrated lithium bis(fluorosulfonyl)imide (LiFSI)-triethyl phosphate (TEP) solution. The designed electrolyte (d = 1.04 g mL-1) is 40%-50% lighter than conventional localized high-concentration electrolytes (LHCEs), leading to 12%-20% extra energy density at the cell level. Besides, the use of DBE introduces substantial solvent-diluent affinity, resulting in a unique solvation structure with strengthened capability to form favorable anion-derived inorganic-rich interphases, minimize electrolyte consumption, and improve cell cyclability. The electrolyte also exhibits low volatility and offers good protection to both Li metal anode and SPAN cathode under thermal abuse.

π-π Stacked Nigrosine@Carbon Nanotube Nanocomposite as an All-in-One Additive for High Energy Flexible Batteries.

The pursuit of high energy density in lithium batteries has driven the development of efficient electrodes with low levels of inactive components. Herein, a facile approach involving the use of π-π stacked nigrosine@carbon nanotube nanocomposites as an all-in-one additive for a LiFePO4 cathode has been developed. This design significantly reduces the proportion of inactive substances within the cathode, resulting in a battery that exhibits a high specific capacity of 143 mAh g-1 at a 1 C rate and shows commendable cyclic performance. Furthermore, the elimination of rigid current collectors endows the electrode with flexibility, offering avenues for future wearable energy storage devices.

Construction and Modification of Nitrogen-Rich Polycyclic Frameworks: A Promising Fused Tricyclic Host-Guest Energetic Material with Heat Resistance, High Energy, and Low Sensitivity.

The construction and modification of novel energetic frameworks to achieve an ideal balance between high energy density and good stability are a continuous pursuit for researchers. In this work, a fused [5,6,5]-tricyclic framework was utilized as the energetic host to encapsulate the oxidant molecules for the first time. A series of new pyridazine-based [5,6] and [5,6,5] fused polycyclic nitrogen-rich skeletons and their derivatives were designed and synthesized. Two strategies, amino oxidation and host-guest inclusion, were used to modify the skeleton in only one step. All compounds exhibit good comprehensive properties (Td (onset) > 200 °C, ρ > 1.85 g cm-3, Dv > 8400 m s-1, IS > 20 J, FS > 360 N). Benefiting from the pyridazine-based fused tricyclic structure with more hydrogen bonding units and larger conjugated systems, the first example of [5,6,5]-tricyclic host-guest energetic material triamino-9H-pyrazolo[3,4-d][1,2,4]triazolo[4,3-b]pyridazine-diperchloric acid (10), shows high decomposition temperature (Td (onset) = 336 °C), high density and heats of formation (ρ = 1.94 g cm-3, ΔHf = 733.4 kJ mol-1), high detonation performance (Dv = 8820 m s-1, P = 36.2 GPa), high specific impulse (Isp = 269 s), and low sensitivity (IS = 30 J, FS > 360 N). The comprehensive performance of 10 is superior to that of high-energy explosive RDX and heat-resistant explosives such as HNS and LLM-105. 10 has the potential to become a comprehensive advanced energetic material that simultaneously satisfies the requirements of high-energy and low-sensitivity explosives, heat-resistant explosives, and solid propellants. This work may give new insights into the construction and modification of a nitrogen-rich polycyclic framework and broaden the applications of fused polycyclic framework for the development of host-guest energetic materials.

Bosentan monohydrate and sildenafil base as two companions in enabling formulations.

HYPOTHESIS: Sildenafil base and bosentan monohydrate are co-administered in a chronic therapy of pulmonary arterial hypertension (PAH). Both drugs are poorly soluble in water, and their bioavailability is limited to ca. 50 %. Since bosentan is a weak acid, whereas sildenafil is a weak base, we assumed that their co-amorphization could: (i) improve their solubility in the gastrointestinal fluids, (ii) enable to reach supersaturation and (iii) ensure stabilization of supersaturated solutions. If successful, this could accelerate the development of new fixed-dose combination drugs. EXPERIMENTS: The co-amorphous formulations were prepared using high energy ball milling. Their solid state properties were assessed using XRD, DSC, FT-MIR, and dielectric spectroscopy. Particle size distribution and surface wetting were also analyzed. Polarizing optical microscopy and scanning electron microscopy were applied to assess the microstructure of these powders. A new HPLC-DAD method was developed for a simultaneous quantification of both drugs. FINDINGS: It was shown that binary formulations in which bosentan was molecularly dispersed in sildenafil base (Tg = 64-78 °C) could be manufactured in the high energy ball milling process. When the sildenafil load was below 50 wt. %, the formulations showed the greatest thermal stability and formed long-lasting bosentan supersaturation in PBS.

Study on the Application of Fluorinated Polyimide in the Acidic Corrosion Protection of 3-nitro-1,2,4-trizole-5-one (NTO)-Based Explosive Formulations.

3-nitro-1,2,4-triazol-5-one (NTO) has been widely used as a kind of insensitive single-compound explosive owing to its excellent balance between safety and explosive energy. To reduce its possible acid corrosion and extend its application to insensitive ammunition, acid protection research on NTO-based explosives is significant. Traditionally, the acid protection effect was evaluated by metal corrosion, which is time-consuming and qualitative. An efficient and quantitative method is desirable for evaluating the acid protection effect and exploring novel protection materials. Herein, a polyimide of 4,4'-(hexafluoroisopropene)diphthalic anhydride (6FDA)/2,2-bis(trifluoromethyl)-4,4-diaminobiphenyl (TFMB) was synthesized by replacing the 4,4'-diaminodiphenyl ether (ODA) monomer with a TFMB monomer to act as an acid-protective coating material for NTO-based explosives. Compared with three other coating materials, polyvinylidene fluoride (PVDF), polyetherimide (PEI), and copolyimide (P84), the fluorinated polyimide exhibits the best acid protection effect. Moreover, a new method was constructed to obtain the pH time-dependent curve in order to evaluate efficiently the acid protection effect of the polymer materials. By the virtue of molecular dynamic simulation (Materials Studio 2023), the interfacial effects of the coating materials with NTO-based explosives were obtained. The study provides an interpretation of the acid protection effect on the molecular level, suggesting that the higher content of fluorine atoms is beneficial for stabilizing the active hydrogen atom of the NTO by forming intermolecular hydrogen bonds.

Incidence of intra-abdominal injuries in hemodynamically stable blunt trauma patients with a normal computed tomography scan admitted to the emergency department.

OBJECTIVES: Blunt abdominal trauma is a common cause of emergency department admission. Computed tomography (CT) scanning is the gold standard method for identifying intra-abdominal injuries in patients experiencing blunt trauma, especially those with high-energy trauma. Although the diagnostic accuracy of this imaging technique is very high, patient admission and prolonged observation protocols are still common practices worldwide. We aimed to evaluate the incidence of intra-abdominal injury in hemodynamically stable patients with high-energy blunt trauma and a normal abdominal CT scan at a Level-1 Trauma Center in Colombia, South America, to assess the relevance of a prolonged observation period. METHODS: We performed a retrospective study of patients admitted to the emergency department for blunt trauma between 2021 and 2022. All consecutive patients with high-energy mechanisms of trauma and a normal CT scan at admission were included. Our primary outcomes were the incidence of intra-abdominal injury identified during a 24-hour observation period or hospital stay, ICU admission, and death. RESULTS: We included 480 patients who met the inclusion criteria. The median age was 33 (IQR 25.5, 47), and 74.2% were male. The most common mechanisms of injury were motor vehicle accidents (64.2%), falls from height (26%), and falls from bikes (3.1%). A total of 99.2% of patients had a Revised Trauma Score of 8. Only 1 patient (0.2%) (95% CI: 0.01-1.16) presented with an abdominal injury during the observation period. No ICU admissions or deaths were reported. CONCLUSION: The incidence of intra-abdominal injury in patients with hemodynamically stable blunt trauma and a negative abdominal CT scan is extremely low, and prolonged observation may not be justified in these patients.

JWST detection of a supernova associated with GRB 221009A without an r-process signature.

Identifying the sites of r-process nucleosynthesis, a primary mechanism of heavy element production, is a key goal of astrophysics. The discovery of the brightest gamma-ray burst (GRB) to date, GRB 221009A, presented an opportunity to spectroscopically test the idea that r-process elements are produced following the collapse of rapidly rotating massive stars. Here we present James Webb Space Telescope observations of GRB 221009A obtained +168 and +170 rest-frame days after the gamma-ray trigger, and demonstrate that they are well described by a SN 1998bw-like supernova (SN) and power-law afterglow, with no evidence for a component from r-process emission. The SN, with a nickel mass of approximately 0.09 M ⊙, is only slightly fainter than the brightness of SN 1998bw at this phase, which indicates that the SN is not an unusual GRB-SN. This demonstrates that the GRB and SN mechanisms are decoupled and that highly energetic GRBs are not likely to produce significant quantities of r-process material, which leaves open the question of whether explosions of massive stars are key sources of r-process elements. Moreover, the host galaxy of GRB 221009A has a very low metallicity of approximately 0.12 Z ⊙ and strong H2 emission at the explosion site, which is consistent with recent star formation, hinting that environmental factors are responsible for its extreme energetics.

Utilization of shea butter waste-derived hierarchical activated carbon for high-performance supercapacitor applications.

In this work, carbonization and subsequent activation procedures were adopted to synthesize waste shea butter shells into oxygen-rich interconnected porous activated carbon (SAC_x, x is the mass ratio of KOH used for activation). The SAC_1.5 electrode material showed outstanding electrochemical performance with high specific capacitance (286.6F/g) and improved rate capability, owing to various synergistic effects originating from a high specific surface area (1233.5 m2/g) and O-rich content. The SAC_1.5-based symmetric device delivered an impressive specific capacitance of 91.6F/g with a high energy density of 12.7 Wh/kg at 0.5 A/g. The device recorded 99.9 % capacitance retention after 10,000 charge-discharge cycles. The symmetric supercapacitor device successfully lit an LED bulb for more than 1 h, signifying the potential of bio-waste as an efficient carbon precursor for electrode material in practical supercapacitors. This work offers an efficient, affordable, and environmentally friendly strategy for potential renewable energy storage devices.

Cobalt-Imidazole Complexes: Effect of Anion Nature on Thermochemical Properties.

A solvent-free method was proposed for the synthesis of hexaimidazolecobalt(II) nitrate and perchlorate complexes-[Co(C3H4N2)6](NO3)2 and [Co(C3H4N2)6](ClO4)2-by adding cobalt salts to melted imidazole. The composition, charge state of the metal, and the structure of the resulting complexes were confirmed by elemental analysis, XPS, IR spectroscopy, and XRD. The study of the thermochemical properties of the synthesized complexes showed that [Co(C3H4N2)6](NO3)2 and [Co(C3H4N2)6](ClO4)2 are thermally stable up to 150 and 170 °C, respectively. When the critical temperature of thermal decomposition is reached, oxidative two-stage gasification is observed. In this case, the organic component of the [Co(C3H4N2)6](NO3)2 complex undergoes almost complete gasification to form Co3O4 with a slight admixture of CoO, which makes it attractive as a component of gas-generation compositions, like airbags.

High-throughput and high-resolution powder X-ray diffractometer consisting of six sets of 2D CdTe detectors with variable sample-to-detector distance and innovative automation system.

The demand for powder X-ray diffraction analysis continues to increase in a variety of scientific fields, as the excellent beam quality of high-brightness synchrotron light sources enables the acquisition of high-quality measurement data with high intensity and angular resolution. Synchrotron powder diffraction has enabled the rapid measurement of many samples and various in situ/operando experiments in nonambient sample environments. To meet the demands for even higher throughput measurements using high-energy X-rays at SPring-8, a high-throughput and high-resolution powder diffraction system has been developed. This system is combined with six sets of two-dimensional (2D) CdTe detectors for high-energy X-rays, and various automation systems, including a system for automatic switching among large sample environmental equipment, have been developed in the third experimental hutch of the insertion device beamline BL13XU at SPring-8. In this diffractometer system, high-brilliance and high-energy X-rays ranging from 16 to 72 keV are available. The powder diffraction data measured under ambient and various nonambient conditions can be analysed using Rietveld refinement and the pair distribution function. Using the 2D CdTe detectors with variable sample-to-detector distance, three types of scan modes have been established: standard, single-step and high-resolution. A major feature is the ability to measure a whole powder pattern with millisecond resolution. Equally important, this system can measure powder diffraction data with high Q exceeding 30 Å-1 within several tens of seconds. This capability is expected to contribute significantly to new research avenues using machine learning and artificial intelligence by utilizing the large amount of data obtained from high-throughput measurements.