The structure and diversity of macroinvertebrate assemblages associated with the understudied pseudo-kelp Saccorhiza polyschides in the Western English Channel (UK).

We examined spatiotemporal variability in the structure of faunal assemblages associated with the warm-temperate pseudo-kelp Saccorhiza polyschides towards its range centre (Western English Channel, southwest UK), to better understand its role as a habitat-former in the northeast Atlantic. A total of 180 sporophytes and their associated fauna were sampled across three months, three sites, and two depths. Assemblage abundance and biomass varied markedly between three morpho-functional sporophyte components (i.e., holdfast, stipe, blade). We recorded rich and abundant macroinvertebrate assemblages, comprising nine phyla, 28 coarse taxonomic groups, and 57 species of molluscs, which consistently dominated assemblages. We observed pronounced seasonality in faunal assemblage structure, marked variability between sites and depths, and strong positive relationships between biogenic habitat availability and faunal abundance/biomass. S. polyschides sporophytes are short-lived and offer temporary, less-stable habitat compared with dominant perennial Laminaria species, so shifts in the relative abundances of habitat-formers will likely alter local biodiversity patterns.

The screening and expression of polysaccharide deacetylase from Caulobacter crescentus and its function analysis.

The bacterium Caulobacter crescentus secretes an adhesive polysaccharide called holdfast, which is the known strongest underwater adhesive in nature. The deacetylase encoded by hfs (holdfast synthesis) H gene is a key factor affecting the adhesion of holdfast. Its structure and function are not yet clear, and whether other polysaccharide deacetylases exist in C. crescentus is still unknown. The screening of both HfsH and its structural analogue as well as their purification from the artificial expression products of Escherichia coli is the first step to clarify these questions. Here, we determined the conserved domains of HfsH via sequence alignment among carbohydrate esterase family 4 enzymes and screened out its structural analogue (CC_2574) in C. crescentus. The recombinant HfsH and CC_2574 were effectively expressed in E. coli. Both of them were purified by chromatography from their corresponding productions in E. coli and were then functionally analyzed. The results indicated that a high deacetylase activity (61.8 U/mg) was observed in recombinant HfsH but not in CC_2574, which suggesting that HfsH might be the irreplaceable gene mediating adhesion of holdfast in C. crescentus. Moreover, the divalent metal ions Zn2+ , Mg2+ , and Mn2+ could promote the activity of recombinant HfsH at the concentration from 0.05 to 1 mM, but inhibit its activity when the concentration exceeds 1 mM. In sum, our study first realized the artificial production of polysaccharide deacetylase HfsH and its structural analogue, and further explored their functions, both of which laid the foundation for the development of new adhesive materials.

Could the annual Saccorhiza polyschides replace a sympatric perennial kelp (Laminaria ochroleuca) when it comes to supporting the holdfast-associated fauna?

Kelp forests dominate temperate rocky shores worldwide but are declining globally with consequences for organisms that depend on them. In NW Iberia, the golden kelp (Laminaria ochroleuca) commonly occurs alongside a fast-growing annual that, unlike the golden kelp, does not seem to have receded in recent times (Saccorhiza polyschides). Here, we assessed whether the bulbous holdfast of S. polyschides could replace the intricate holdfast of L. ochroleuca as epifaunal habitat provider. Richness, diversity and total abundance of epifauna was similar in both seaweeds, while colonial/encrusting fauna was more abundant in L. ochroleuca. More importantly, each host supported a distinctive assemblage structure, indicating that S. polyschides seems an unsuitable replacement for L. ochroleuca as habitat provider for holdfast epifauna. Therefore, while S. polyschides may contribute substantially to the kelp forest canopy in some seasons, a regional decline of L. ochroleuca will likely alter the patterns of biodiversity within kelp stands.

What Glues the Glue to the Cell Surface?

In the Caulobacterales, a highly adhesive polysaccharide called the holdfast mediates attachment to exogenous surfaces. The mechanism by which this polysaccharide is anchored to the cell envelope is not well defined. N. K. Chepkwony, G. G. Hardy, and Y. V. Brun (J Bacteriol 204:e00273-22, 2022, https://doi.org/10.1128/jb.00273-22) report the characterization of HfaE, a localized surface protein with amyloid-like properties that is required for robust holdfast anchoring. This study expands our understanding of the protein factors that attach a bacterial "superglue" to the surface of the cell.

HfaE Is a Component of the Holdfast Anchor Complex That Tethers the Holdfast Adhesin to the Cell Envelope.

Bacteria use adhesins to colonize different surfaces and form biofilms. The species of the Caulobacterales order use a polar adhesin called holdfast, composed of polysaccharides, proteins, and DNA, to irreversibly adhere to surfaces. In Caulobacter crescentus, a freshwater Caulobacterales species, the holdfast is anchored at the cell pole via the holdfast anchor (Hfa) proteins HfaA, HfaB, and HfaD. HfaA and HfaD colocalize with holdfast and are thought to form amyloid-like fibers that anchor holdfast to the cell envelope. HfaB, a lipoprotein, is required for the translocation of HfaA and HfaD to the cell surface. Deletion of the anchor proteins leads to a severe defect in adherence resulting from holdfast not being properly attached to the cell and shed into the medium. This phenotype is greater in a ΔhfaB mutant than in a ΔhfaA ΔhfaD double mutant, suggesting that HfaB has other functions besides the translocation of HfaA and HfaD. Here, we identify an additional HfaB-dependent holdfast anchoring protein, HfaE, which is predicted to be a secreted protein. HfaE is highly conserved among Caulobacterales species, with no predicted function. In planktonic culture, hfaE mutants produce holdfasts and rosettes similar to those produced by the wild type. However, holdfasts from hfaE mutants bind to the surface but are unable to anchor cells, similarly to other anchor mutants. We showed that fluorescently tagged HfaE colocalizes with holdfast and that HfaE forms an SDS-resistant high-molecular-weight species consistent with amyloid fiber formation. We propose that HfaE is a novel holdfast anchor protein and that HfaE functions to link holdfast material to the cell envelope. IMPORTANCE For surface attachment and biofilm formation, bacteria produce adhesins that are composed of polysaccharides, proteins, and DNA. Species of the Caulobacterales produce a specialized polar adhesin, holdfast, which is required for permanent attachment to surfaces. In this study, we evaluate the role of a newly identified holdfast anchor protein, HfaE, in holdfast anchoring to the cell surface in two different members of the Caulobacterales with drastically different environments. We show that HfaE plays an important role in adhesion and biofilm formation in the Caulobacterales. Our results provide insights into bacterial adhesins and how they interact with the cell envelope and surfaces.

Epidermal cell-patterning genes of the stem parasitic plant Cuscuta campestris are involved in the development of holdfasts.

Cuscuta campestris, a stem parasitic plant, commences its parasitic behavior by forming a specialized disk-like adhesive structure called a holdfast, which facilitates tight adhesion to the stem surface of the host plant. The morphology of epidermal cells in the holdfast is similar to that of the leaf trichome and root hairs of dicotyledonous plants. However, the regulatory network underlying the development of the holdfast has not been elucidated to date. In this study, we assessed the roles of epidermal cell-patterning genes in the development of a holdfast. Epidermal cell-patterning genes of C. campestris, including CcWER, CcGL3, CcTTG1, CcGL2, and CcJKD, were expressed slightly before the initiation of the outgrowth of stem epidermal cells. CcJKD-silencing repressed CcJKD, CcWER, CcGL3, CcTTG1, CcGL2; therefore, CcJKD is an upstream regulator of other epidermal cell-patterning genes. Unlike other genes, CcCPC was not upregulated after attachment to the host, and was not repressed by CcJKD-silencing. Protein interaction assays demonstrated that CcJKD interacted with CcTTG1 and CcCPC. Furthermore, CcJKD-silencing repressed the outgrowth of holdfast epidermal cells. Therefore, C. campestris invokes epidermal cell-patterning genes for the outgrowth of holdfast epidermal cells, and their regulatory mechanism is different from those for leaf trichome or root hairs.

Flagellar Perturbations Activate Adhesion through Two Distinct Pathways in Caulobacter crescentus.

Bacteria carry out sophisticated developmental programs to colonize exogenous surfaces. The rotary flagellum, a dynamic machine that drives motility, is a key regulator of surface colonization. The specific signals recognized by flagella and the pathways by which those signals are transduced to coordinate adhesion remain subjects of debate. Mutations that disrupt flagellar assembly in the dimorphic bacterium Caulobacter crescentus stimulate the production of a polysaccharide adhesin called the holdfast. Using a genomewide phenotyping approach, we compared surface adhesion profiles in wild-type and flagellar mutant backgrounds of C. crescentus We identified a diverse set of flagellar mutations that enhance adhesion by inducing a hyperholdfast phenotype and discovered a second set of mutations that suppress this phenotype. Epistasis analysis of the flagellar signaling suppressor (fss) mutations demonstrated that the flagellum stimulates holdfast production via two genetically distinct pathways. The developmental regulator PleD contributes to holdfast induction in mutants disrupted at both early and late stages of flagellar assembly. Mutants disrupted at late stages of flagellar assembly, which assemble an intact rotor complex, induce holdfast production through an additional process that requires the MotAB stator and its associated diguanylate cyclase, DgcB. We have assigned a subset of the fss genes to either the stator- or pleD-dependent networks and characterized two previously unidentified motility genes that regulate holdfast production via the stator complex. We propose a model through which the flagellum integrates mechanical stimuli into the C. crescentus developmental program to coordinate adhesion.IMPORTANCE Understanding how bacteria colonize solid surfaces is of significant clinical, industrial and ecological importance. In this study, we identified genes that are required for Caulobacter crescentus to activate surface attachment in response to signals from a macromolecular machine called the flagellum. Genes involved in transmitting information from the flagellum can be grouped into separate pathways, those that control the C. crescentus morphogenic program and those that are required for flagellar motility. Our results support a model in which a developmental and a mechanical signaling pathway operate in parallel downstream of the flagellum and converge to regulate adhesion. We conclude that the flagellum serves as a signaling hub by integrating internal and external cues to coordinate surface colonization and emphasize the role of signal integration in linking complex sets of environmental stimuli to individual behaviors.

Identification and first insights into the structure of chitin from the endemic freshwater demosponge Ochridaspongia rotunda (Arndt, 1937).

Studies on the identification, properties and function of chitin in sponges (Porifera), which are recognized as the first multicellular organisms on Earth, continue to be of fundamental scientific interest. The occurrence of chitin has so far been reported in 21 marine sponge species and only in two inhabiting fresh water. In this study, we present the discovery of α-chitin in the endemic demosponge Ochridaspongia rotunda, found in Lake Ohrid, which dates from the Tertiary. The presence of chitin in this species was confirmed using special staining, a chitinase test, FTIR, Raman and NEXAFS spectroscopy, and electrospray ionization mass spectrometry (ESI-MS). In contrast to the case of marine sponges, chitin in O. rotunda has been found only within its holdfast, suggesting a role of chitin in the attachment of the sponge to the hard substratum. Isolated fibrous matter strongly resemble the shape and size of the sponge holdfast with membrane-like structure.

The Two Chemotaxis Clusters in Caulobacter crescentus Play Different Roles in Chemotaxis and Biofilm Regulation.

The holdfast polysaccharide adhesin is crucial for irreversible cell adhesion and biofilm formation in Caulobacter crescentus Holdfast production is tightly controlled via developmental regulators, as well as via environmental and physical signals. Here, we identify a novel mode of regulation of holdfast synthesis that involves chemotaxis proteins. We characterized the two identified chemotaxis clusters of C. crescentus and showed that only the previously characterized major cluster is involved in the chemotactic response toward different carbon sources. However, both chemotaxis clusters encoded in the C. crescentus genome play a role in biofilm formation and holdfast production by regulating the expression of hfiA, the gene encoding the holdfast inhibitor HfiA. We show that CheA and CheB proteins act in an antagonistic manner, as follows: while the two CheA proteins negatively regulate hfiA expression, the CheB proteins are positive regulators, thus providing a modulation of holdfast synthesis and surface attachment.IMPORTANCE Chemosensory systems constitute major signal transduction pathways in bacteria. These systems are involved in chemotaxis and other cell responses to environment conditions, such as the production of adhesins to enable irreversible adhesion to a surface and surface colonization. The C. crescentus genome encodes two complete chemotaxis clusters. Here, we characterized the second novel chemotaxis-like cluster. While only the major chemotaxis cluster is involved in chemotaxis, both chemotaxis systems modulate C. crescentus adhesion by controlling expression of the holdfast synthesis inhibitor HfiA. Here, we identify a new level in holdfast regulation, providing new insights into the control of adhesin production that leads to the formation of biofilms in response to the environment.

A Multiprotein Complex Anchors Adhesive Holdfast at the Outer Membrane of Caulobacter crescentus.

Adhesion allows microbes to colonize surfaces and is the first stage in biofilm formation. Stable attachment of the freshwater alphaproteobacterium Caulobacter crescentus to surfaces requires an adhesive polysaccharide called holdfast, which is synthesized at a specific cell pole and ultimately found at the tip of cylindrical extensions of the cell envelope called stalks. Secretion and anchoring of holdfast to the cell surface are governed by proteins HfsDAB and HfaABD, respectively. The arrangement and organization of these proteins with respect to each other and the cell envelope, and the mechanism by which the holdfast is anchored on cells, are unknown. In this study, we have imaged a series of C. crescentus mutants using electron cryotomography, revealing the architecture and arrangement of the molecular machinery involved in holdfast anchoring in cells. We found that the holdfast is anchored to cells by a defined complex made up of the HfaABD proteins and that the HfsDAB secretion proteins are essential for proper assembly and localization of the HfaABD anchor. Subtomogram averaging of cell stalk tips showed that the HfaABD complex spans the outer membrane. The anchor protein HfaB is the major component of the anchor complex located on the periplasmic side of the outer membrane, while HfaA and HfaD are located on the cell surface. HfaB is the critical component of the complex, without which no HfaABD complex was observed in cells. These results allow us to propose a working model of holdfast anchoring, laying the groundwork for further structural and cell biological investigations.IMPORTANCE Adhesion and biofilm formation are fundamental processes that accompany bacterial colonization of surfaces, which are of critical importance in many infections. Caulobacter crescentus biofilm formation proceeds via irreversible adhesion mediated by a polar polysaccharide called holdfast. Mechanistic and structural details of how the holdfast is secreted and anchored on cells are still lacking. Here, we have assigned the location and described the arrangement of the holdfast anchor complex. This work increases our knowledge of the relatively underexplored field of polysaccharide-mediated adhesion by identifying structural elements that anchor polysaccharides to the cell envelope, which is important in a variety of bacterial species.

Role of Caulobacter Cell Surface Structures in Colonization of the Air-Liquid Interface.

In aquatic environments, Caulobacter spp. can be found at the boundary between liquid and air known as the neuston. I report an approach to study temporal features of Caulobacter crescentus colonization and pellicle biofilm development at the air-liquid interface and have defined the role of cell surface structures in this process. At this interface, C. crescentus initially forms a monolayer of cells bearing a surface adhesin known as the holdfast. When excised from the liquid surface, this monolayer strongly adheres to glass. The monolayer subsequently develops into a three-dimensional structure that is highly enriched in clusters of stalked cells known as rosettes. As this pellicle film matures, it becomes more cohesive and less adherent to a glass surface. A mutant strain lacking a flagellum does not efficiently reach the surface, and strains lacking type IV pili exhibit defects in organization of the three-dimensional pellicle. Strains unable to synthesize the holdfast fail to accumulate at the boundary between air and liquid and do not form a pellicle. Phase-contrast images support a model whereby the holdfast functions to trap C. crescentus cells at the air-liquid boundary. Unlike the holdfast, neither the flagellum nor type IV pili are required for C. crescentus to partition to the air-liquid interface. While it is well established that the holdfast enables adherence to solid surfaces, this study provides evidence that the holdfast has physicochemical properties that allow partitioning of nonmotile mother cells to the air-liquid interface and facilitate colonization of this microenvironment.IMPORTANCE In aquatic environments, the boundary at the air interface is often highly enriched with nutrients and oxygen. Colonization of this niche likely confers a significant fitness advantage in many cases. This study provides evidence that the cell surface adhesin known as a holdfast enables Caulobacter crescentus to partition to and colonize the air-liquid interface. Additional surface structures, including the flagellum and type IV pili, are important determinants of colonization and biofilm formation at this boundary. Considering that holdfast-like adhesins are broadly conserved in Caulobacter spp. and other members of the diverse class Alphaproteobacteria, these surface structures may function broadly to facilitate colonization of air-liquid boundaries in a range of ecological contexts, including freshwater, marine, and soil ecosystems.

Comparative Analysis of Ionic Strength Tolerance between Freshwater and Marine Caulobacterales Adhesins.

Bacterial adhesion is affected by environmental factors, such as ionic strength, pH, temperature, and shear forces. Therefore, marine bacteria must have developed adhesins with different compositions and structures than those of their freshwater counterparts to adapt to their natural environment. The dimorphic alphaproteobacterium Hirschia baltica is a marine budding bacterium in the clade CaulobacteralesH. baltica uses a polar adhesin, the holdfast, located at the cell pole opposite the reproductive stalk, for surface attachment and cell-cell adhesion. The holdfast adhesin has been best characterized in Caulobacter crescentus, a freshwater member of the Caulobacterales, and little is known about holdfast compositions and properties in marine Caulobacterales Here, we use H. baltica as a model to characterize holdfast properties in marine Caulobacterales We show that freshwater and marine Caulobacterales use similar genes in holdfast biogenesis and that these genes are highly conserved among the species in the two genera. We determine that H. baltica produces a larger holdfast than C. crescentus and that the holdfasts have different chemical compositions, as they contain N-acetylglucosamine and galactose monosaccharide residues and proteins but lack DNA. Finally, we show that H. baltica holdfasts tolerate higher ionic strength than those of C. crescentus We conclude that marine Caulobacterales holdfasts have physicochemical properties that maximize binding in high-ionic-strength environments.IMPORTANCE Most bacteria spend a large part of their life spans attached to surfaces, forming complex multicellular communities called biofilms. Bacteria can colonize virtually any surface, and therefore, they have adapted to bind efficiently in very different environments. In this study, we compare the adhesive holdfasts produced by the freshwater bacterium C. crescentus and a relative, the marine bacterium H. baltica We show that H. baltica holdfasts have a different morphology and chemical composition and tolerate high ionic strength. Our results show that the H. baltica holdfast is an excellent model to study the effect of ionic strength on adhesion and provides insights into the physicochemical properties required for adhesion in the marine environment.

A Genome-Wide Analysis of Adhesion in Caulobacter crescentus Identifies New Regulatory and Biosynthetic Components for Holdfast Assembly.

Due to their intimate physical interactions with the environment, surface polysaccharides are critical determinants of fitness for bacteria. Caulobacter crescentus produces a specialized structure at one of its cell poles called the holdfast that enables attachment to surfaces. Previous studies have shown that the holdfast is composed of carbohydrate-based material and identified a number of genes required for holdfast development. However, incomplete information about its chemical structure, biosynthetic genes, and regulatory principles has limited progress in understanding the mechanism of holdfast synthesis. We leveraged the adhesive properties of the holdfast to perform a saturating screen for genes affecting attachment to cheesecloth over a multiday time course. Using similarities in the temporal profiles of mutants in a transposon library, we defined discrete clusters of genes with related effects on cheesecloth colonization. Holdfast synthesis, flagellar motility, type IV pilus assembly, and smooth lipopolysaccharide (SLPS) production represented key classes of adhesion determinants. Examining these clusters in detail allowed us to predict and experimentally define the functions of multiple uncharacterized genes in both the holdfast and SLPS pathways. In addition, we showed that the pilus and the flagellum control holdfast synthesis separately by modulating the holdfast inhibitor hfiA. This report defines a set of genes contributing to adhesion that includes newly discovered genes required for holdfast biosynthesis and attachment. Our data provide evidence that the holdfast contains a complex polysaccharide with at least four monosaccharides in the repeating unit and underscore the central role of cell polarity in mediating attachment of C. crescentus to surfaces.IMPORTANCE Bacteria routinely encounter biotic and abiotic materials in their surrounding environments, and they often enlist specific behavioral programs to colonize these materials. Adhesion is an early step in colonizing a surface. Caulobacter crescentus produces a structure called the holdfast which allows this organism to attach to and colonize surfaces. To understand how the holdfast is produced, we performed a genome-wide search for genes that contribute to adhesion by selecting for mutants that could not attach to cheesecloth. We discovered complex interactions between genes that mediate surface contact and genes that contribute to holdfast development. Our genetic selection identified what likely represents a comprehensive set of genes required to generate a holdfast, laying the groundwork for a detailed characterization of the enzymes that build this specialized adhesin.

Layered Structure and Complex Mechanochemistry Underlie Strength and Versatility in a Bacterial Adhesive.

While designing synthetic adhesives that perform in aqueous environments has proven challenging, microorganisms commonly produce bioadhesives that efficiently attach to a variety of substrates, including wet surfaces. The aquatic bacterium Caulobacter crescentus uses a discrete polysaccharide complex, the holdfast, to strongly attach to surfaces and resist flow. The holdfast is extremely versatile and has impressive adhesive strength. Here, we used atomic force microscopy in conjunction with superresolution microscopy and enzymatic assays to unravel the complex structure of the holdfast and to characterize its chemical constituents and their role in adhesion. Our data support a model whereby the holdfast is a heterogeneous material organized as two layers: a stiffer nanoscopic core layer wrapped into a sparse, far-reaching, flexible brush layer. Moreover, we found that the elastic response of the holdfast evolves after surface contact from initially heterogeneous to more homogeneous. From a composition point of view, besides N-acetyl-d-glucosamine (NAG), the only component that had been identified to date, our data show that the holdfast contains peptides and DNA. We hypothesize that, while polypeptides are the most important components for adhesive force, the presence of DNA mainly impacts the brush layer and the strength of initial adhesion, with NAG playing a primarily structural role within the core. The unanticipated complexity of both the structure and composition of the holdfast likely underlies its versatility as a wet adhesive and its distinctive strength. Continued improvements in understanding of the mechanochemistry of this bioadhesive could provide new insights into how bacteria attach to surfaces and could inform the development of new adhesives.IMPORTANCE There is an urgent need for strong, biocompatible bioadhesives that perform underwater. To strongly adhere to surfaces and resist flow underwater, the bacterium Caulobacter crescentus produces an adhesive called the holdfast, the mechanochemistry of which remains undefined. We show that the holdfast is a layered structure with a stiff core layer and a polymeric brush layer and consists of polysaccharides, polypeptides, and DNA. The DNA appears to play a role in the structure of the brush layer and initial adhesion, the peptides in adhesive strength, and the polysaccharides in the structure of the core. The complex, multilayer organization and diverse chemistry described here underlie the distinctive adhesive properties of the holdfast and will provide important insights into the mechanisms of bacterial adhesion and bioadhesive applications.

Mutations in Sugar-Nucleotide Synthesis Genes Restore Holdfast Polysaccharide Anchoring to Caulobacter crescentus Holdfast Anchor Mutants.

Attachment is essential for microorganisms to establish interactions with both biotic and abiotic surfaces. Stable attachment of Caulobacter crescentus to surfaces requires an adhesive polysaccharide holdfast, but the exact composition of the holdfast is unknown. The holdfast is anchored to the cell envelope by outer membrane proteins HfaA, HfaB, and HfaD. Holdfast anchor gene mutations result in holdfast shedding and reduced cell adherence. Translocation of HfaA and HfaD to the cell surface requires HfaB. The Wzx homolog HfsF is predicted to be a bacterial polysaccharide flippase. An hfsF deletion significantly reduced the amount of holdfast produced per cell and slightly reduced adherence. A ΔhfsF ΔhfaD double mutant was completely deficient in adherence. A suppressor screen that restored adhesion in the ΔhfsF ΔhfaD mutant identified mutations in three genes: wbqV, rfbB, and rmlA Both WbqV and RfbB belong to a family of nucleoside-diphosphate epimerases, and RmlA has similarity to nucleotidyltransferases. The loss of wbqV or rfbB in the ΔhfsF ΔhfaD mutant reduced holdfast shedding but did not restore holdfast synthesis to parental levels. Loss of wbqV or rfbB did not restore adherence to a ΔhfsF mutant but did restore adherence and holdfast anchoring to a ΔhfaD mutant, confirming that suppression occurs through restoration of holdfast anchoring. The adherence and holdfast anchoring of a ΔhfaA ΔhfaD mutant could be restored by wbqV or rfbB mutation, but such mutations could not suppress these phenotypes in the ΔhfaB mutant. We hypothesize that HfaB plays an additional role in holdfast anchoring or helps to translocate an unknown factor that is important for holdfast anchoring.IMPORTANCE Biofilm formation results in increased resistance to both environmental stresses and antibiotics. Caulobacter crescentus requires an adhesive holdfast for permanent attachment and biofilm formation, but the exact mechanism of polysaccharide anchoring to the cell and the holdfast composition are unknown. Here we identify novel polysaccharide genes that affect holdfast anchoring to the cell. We identify a new role for the holdfast anchor protein HfaB. This work increases our specific knowledge of the polysaccharide adhesin involved in Caulobacter attachment and the general knowledge regarding production and anchoring of polysaccharide adhesins by bacteria. This work also explores the interactions between different polysaccharide biosynthesis and secretion systems in bacteria.

Organization and evolution of the proboscis musculature in avian parasites of the genus Apororhynchus (Acanthocephala: Apororhynchida).

The highly enlarged proboscis in adult thorny-headed worms of the genus Apororhynchus suggests that its inner organization might be specialized as well. However, what kind of changes occurred in the stem line of monogeneric Apororhynchida is widely unknown and there are different conceptions regarding the presence/absence of several muscles. To expand our knowledge on this topic, I examined ethanol-fixed specimens, whole mounts, and semi-thin sections of three Apororhynchus species using the light microscope. Incorporation of previously published data increased the overall sample to five out of six Apororhynchus species known to date. Combined data suggest that Apororhynchida kept the full set of muscles which already evolved in the stem line of Acanthocephala: proboscis receptacle, a receptacle surrounding muscle (receptacle protrusor), retinacula, neck retractor, proboscis and receptacle retractors, circular and longitudinal musculature under the metasomal tegument, and a single muscular layer beneath the proboscis wall. However, especially proboscis receptacle and receptacle protrusor underwent considerable re-organization in the apororhynchid stem line: both muscles are subdivided into sail-like strands extending from the cerebral ganglion to the proboscis wall. This reorganization reflects that the two muscles still suspend the cerebral ganglion but are not implicated in the eversion of the proboscis. Spatially separated subtegumental longitudinal muscle cords and a sphincter at the posterior proboscis margin could be additional apomorphies of Apororhynchida. Finally, lack of a muscle plate, a midventral longitudinal muscle, and of lateral receptacle flexors and the absence of an apical sensory organ indicate a basally branching position of Apororhynchida relative to other Archiacanthocephala.

A Rhizobiales-Specific Unipolar Polysaccharide Adhesin Contributes to Rhodopseudomonas palustris Biofilm Formation across Diverse Photoheterotrophic Conditions.

Bacteria predominantly exist as members of surfaced-attached communities known as biofilms. Many bacterial species initiate biofilms and adhere to each other using cell surface adhesins. This is the case for numerous ecologically diverse Alphaprotebacteria, which use polar exopolysaccharide adhesins for cell-cell adhesion and surface attachment. Here, we show that Rhodopseudomonas palustris, a metabolically versatile member of the alphaproteobacterial order Rhizobiales, contains a functional unipolar polysaccharide (UPP) biosynthesis gene cluster. Deletion of genes predicted to be critical for UPP biosynthesis and export abolished UPP production. We also found that R. palustris uses UPP to mediate biofilm formation across diverse photoheterotrophic growth conditions, wherein light and organic substrates are used to support growth. However, UPP was less important for biofilm formation during photoautotrophy, where light and CO2 support growth, and during aerobic respiration with organic compounds. Expanding our analysis beyond R. palustris, we examined the phylogenetic distribution and genomic organization of UPP gene clusters among Rhizobiales species that inhabit diverse niches. Our analysis suggests that UPP is a conserved ancestral trait of the Rhizobiales but that it has been independently lost multiple times during the evolution of this clade, twice coinciding with adaptation to intracellular lifestyles within animal hosts. IMPORTANCE: Bacteria are ubiquitously found as surface-attached communities and cellular aggregates in nature. Here, we address how bacterial adhesion is coordinated in response to diverse environments using two complementary approaches. First, we examined how Rhodopseudomonas palustris, one of the most metabolically versatile organisms ever described, varies its adhesion to surfaces in response to different environmental conditions. We identified critical genes for the production of a unipolar polysaccharide (UPP) and showed that UPP is important for adhesion when light and organic substrates are used for growth. Looking beyond R. palustris, we performed the most comprehensive survey to date on the conservation of UPP biosynthesis genes among a group of closely related bacteria that occupy diverse niches. Our findings suggest that UPP is important for free-living and plant-associated lifestyles but dispensable for animal pathogens. Additionally, we propose guidelines for classifying the adhesins produced by various Alphaprotebacteria, facilitating future functional and comparative studies.

Giant kelp vegetative propagation: Adventitious holdfast elements rejuvenate senescent individuals of the Macrocystis pyrifera "integrifolia" ecomorph.

Recent findings on holdfast development in the giant kelp highlighted its key importance for Macrocystis vegetative propagation. We report here for the first time the development of adventitious holdfasts from Macrocystis stipes. Swellings emerge spontaneously from different areas of the stipes, especially in senescent or creeping individuals. After being manually fastened to solid substrata, these swellings elongated into haptera, which became strongly attached after 1 month. Within 4 months, new thalli increased in size and vitality, and developed reproductive fronds. Our results suggest the usage of these structures for auxiliary attachment techniques. These could act as a backup, when primary holdfasts are weak, and thus improve the survival rate of the giant kelp in natural beds.

First report on chitinous holdfast in sponges (Porifera).

A holdfast is a root- or basal plate-like structure of principal importance that anchors aquatic sessile organisms, including sponges, to hard substrates. There is to date little information about the nature and origin of sponges' holdfasts in both marine and freshwater environments. This work, to our knowledge, demonstrates for the first time that chitin is an important structural component within holdfasts of the endemic freshwater demosponge Lubomirskia baicalensis. Using a variety of techniques (near-edge X-ray absorption fine structure, Raman, electrospray ionization mas spectrometry, Morgan-Elson assay and Calcofluor White staining), we show that chitin from the sponge holdfast is much closer to α-chitin than to ß-chitin. Most of the three-dimensional fibrous skeleton of this sponge consists of spicule-containing proteinaceous spongin. Intriguingly, the chitinous holdfast is not spongin-based, and is ontogenetically the oldest part of the sponge body. Sequencing revealed the presence of four previously undescribed genes encoding chitin synthases in the L. baicalensis sponge. This discovery of chitin within freshwater sponge holdfasts highlights the novel and specific functions of this biopolymer within these ancient sessile invertebrates.

A SIMPLE METHOD FOR ISOLATING FILAMENTS AS "ALGAL SEED STOCK" FROM MONOSTROMA LATISSIMUM (CHLOROPHYTA) GERMLINGS, AND APPLICATION FOR MASS CULTIVATION(1).

Germlings were grown from Monostroma latissimum Wittr. reproductive cells on nylon ropes. Holdfast threads and some uniseriate filaments were observed to have penetrated the fibers of the dispersed ropes. The algal filaments were easily isolated and prepared for cultivation, in comparison to the methods of enzymatically isolated algal protoplasts. Under low light (60-100 µmol photons · m(-2) · s(-1) ), the algal filaments grew to form a filamentous mass. When cultivated under stronger light (300-600 µmol photons · m(-2) · s(-1) ), they grew to initially form tubular thalli and then, when cultivated under light intensities >700 µmol photons · m(-2) · s(-1) , formed foliaceous thalli. Consequently, the filaments were homogenized into small sections and then sewed on the nylon rope for algal mass cultivation. Under high-intensity natural light, they grew to form leafy thalli.