Bioaccessibility and bioavailability of essential and potentially toxic trace elements in potato cultivars: A comprehensive nutritional evaluation.

Among the most consumed foods in the world is potato, which occupies the first place as a non-grain commodity, demonstrating the importance of its assessment concerning the population's food safety. In this study, the nutrients Ca, Mg, K, P, Cu, Mn, Fe, and Zn and the potentially toxic trace elements Cd, Cr, and Pb were evaluated considering their total contents, bioaccessible and bioavailable fractions in different potato cultivars, in an unpublished approach in the literature. The in vitro standard gastrointestinal digestion method (INFOGEST) and a model of the intestinal epithelial barrier using the Caco-2 cell line were applied for investigate the presence of metals in potato. For the macroelements, the bioaccessibility (% w/w) varied in the ranges: K (57-72 %), P (59-76 %), Mg (83-103 %), and Ca (30-123 %), whereas for the microelements were: Cu (27-74 %) and Mn (4.22-12.02, 60-119 %). The potentially of trace toxic elements, Cd and Pb, were found in 75 % of the samples, however, all the concentration values were below the maximum levels allowed of 0.10 µg/g. Chromium was determined only in potato peels and has no maximum established level. The bioaccessible and bioavailable fractions of Cd, Cr, and Pb were below the limits of quantification of the spectrometric methods (LOQ - µg/L: 0.063 Cd, 0.65 Cr, and 0.44 Pb). The potato samples were considered safe for consumption regarding the presence of potentially toxic trace elements, with a remarkable nutritional contribution.

Profile of inorganic elements of seaweed from the Brazilian Northeast coast.

The contents of 24 elements were determined in seven species of macroalgae collected in Ceara-Brazil, in the rainy and dry seasons of 2022. The samples were digested, and the analytes were quantified by ICP-OES and Hg by direct analyzer. The CRM CD-200 was analyzed for accuracy and obtained recoveries were higher than 95 %. The seaweed species have different inorganic element profiles with predominant elements being: Ca, K, Na, Mg and P. The Sargassum vulgare species stood out for its Hg and As contents (1.479 ± 0.005 mg kg-1 and 172 ± 6 mg kg-1, both in the rainy seasons). Ulva lactuca attracted attention for its high concentration of V (46.4 ± 3.4 mg kg-1, rainy season). In general, the elemental content levels in the macroalgae samples were higher in the rainy season. Long-term studies to comprehend the effect of seasonality on the elemental composition of seaweed must be carried out.

Novel NARC-G1 garlic: comparative allicin quantification with morpho-biochemical & genetic profiling / O raro NARC-G1 alho: quantificação comparativa de alicina com perfil morfo-bioquímico e genético

Garlic (Allium sativum) is an important cash food crop, and the biotechnology industry has considerable interest in the plant because of its medicinal importance. These medicinal properties are attributed to organosulphur compounds as the accumulation of these compounds varies according to genotype, locality, light quality, and cultivation practices. In this study, we compared a newly developed garlic variety NARC-G1 by National Agricultural Research Centre (NARC), Islamabad, Pakistan with three different garlic cultivars and highlighted the distinctive attributes like phenotypic characteristics, the content of allicin, elemental profile, and gene polymorphism. Phenotypic analysis showed NARC-G1 has significantly higher bulb weight (66.36g ± 18.58), single clove weight (5.87g ± 1.041), and clove width (17.41mm ± 0.95) which directly correlates to the size of the garlic. The analytical analysis showed the highest allicin content (4.82 ± 0.001) in NARC-G1. Genotyping of the alliinase in all four cultivars showed indels in the gene resulting in distinguishable changes in organosulphur compounds' profile. NARC-G1 is unique from other garlic cultivars and could be the best choice for mass production with proper cultivation and irrigation management. Moreover, for Pakistan NARC-G1 could be a potential contender to earn the industrial benefits with inland cultivation instead of importing garlic alleviating the economic burden.

O alho (Allium sativum) é uma importante cultura alimentar de rendimento e a indústria biotecnológica tem um interesse considerável na planta devido à sua importância medicinal. As propriedades medicinais são atribuídas aos compostos organossulfurados, enquanto o acúmulo de sulfóxidos de cisteína (CSOs) varia de acordo com genótipo, localidade, qualidade da luz e práticas de cultivo. Neste estudo, comparamos uma variedade de alho recém-desenvolvida NARC-G1 pelo Centro Nacional de Pesquisa Agropecuária (NARC), Islamabade, Paquistão, com três diferentes cultivares de alho, e destacamos os atributos distintivos, como características fenotípicas, conteúdo de alicina, perfil elementar e gene polimorfismo. A análise fenotípica mostrou que o NARC-G1 tem peso de bulbo significativamente maior (66.36g ± 18.58), peso de um único dente (5.87g ± 1.041) e largura do dente (17.41mm ± 0.95), o que se correlaciona diretamente com o tamanho do alho. A análise analítica indicou maior teor de alicina (4.82 ± 0.001) no NARC-G1. A genotipagem do gene da aliinase em todas as quatro cultivares mostrou indels no gene, resultando em mudanças distinguíveis no perfil das CSOs. O NARC-G1 é único em relação a outras cultivares de alho e pode ser a melhor escolha para produção em massa com cultivo adequado e manejo de irrigação. Além disso, para o Paquistão, o NARC-G1 pode ser um potencial candidato para obter os benefícios industriais com o cultivo no interior, em vez de importar alho, aliviando o ônus econômico.

The importance of the pretreatment of samples in Nd quantification from NdFeB magnets through inductively coupled plasma atomic emission spectroscopy (ICP-OES)-a rapid and streamlined methodology.

In this study, we emphasize the critical role of sample pretreatment. We report on the behavior of NdFeB magnet samples exposed to four different acid media for digestion. NdFeB magnets are becoming a significant source of neodymium, a rare-earth element critical to many technologies and a potential substitute for traditional mining of the element. To address this, we meticulously tested nitric acid, hydrochloric acid, acetic acid, and citric acid, all at a concentration of 1.6 M, as economical and environmentally friendly alternatives to the concentrated mineral acids commonly used in the leaching of these materials. The pivotal stage involves the initial characterization of samples in the solid state using SEM-EDX and XPS analysis to obtain their initial composition. Subsequently, the samples are dissolved in the four aforementioned acids. Finally, neodymium is quantified using ICP-OES. Throughout our investigation, we evaluated some analytical parameters to determine the best candidate for performing the digestion, including time, limits of detection and quantification, accuracy, recovery of spike samples, and robustness. After careful consideration, we unequivocally conclude that 1.6 M nitric acid stands out as the optimal choice for dissolving NdFeB magnet samples, with the pretreatment of the samples being the critical aspect of this report.

Trace Elements in Soy-Based Beverages: A Comprehensive Study of Total Content and In Vitro Bioaccessibility.

Soy-based beverages are one of the most consumed plant-based beverages, which have been used as a substitute for dairy products. Soy is a source of several nutrients (vitamins, minerals, and phenolic compounds, etc.) and its consumption is usually associated with several benefits, such as the prevention of cardiovascular diseases, cancer, and osteoporosis. However, non-essential trace elements can be found in these beverages. Thus, a comprehensive study concerning trace elements Al, As, Cd, Co, Cr, Cu, Fe, Li, Mn, Ni, Pb, Sb, Se, Sn, Sr, and Zn in soy-based beverages was proposed. In vitro digestion allowed to simulate the gastrointestinal juice (bioaccessibility) and the Caco-2 cells culture model was applied for the bioavailability assay. Trace elements measures were performed by inductively coupled plasma optical emission spectrometry (ICP OES). Multivariate analysis classified soy-based beverages according to their soy source (isolate protein, hydrosoluble extract, and beans); Al, Cu, Fe, Mn, Sr, Se, and Zn bioaccessible fractions corresponded to approximately 40%-80% of their total content, and soy-based beverages were found to be a good Fe, Se, and Zn source. However, our results showed risk exposure assessment from daily consumption of one glass of soy-based beverage can contribute to 3.5% and 0.9% of Al Provisional Tolerable Weekly Intake (PTWI) for children and adults, respectively.

Magnetic solid phase extraction as a nonchromatographic method for the quantification of ultratrace inorganic arsenic in rice by inductively coupled plasma-optical emission spectrometry (ICP OES).

An alternative analytical method was developed for the quantification of inorganic arsenic (iAs) in rice by ICP OES. Iron nanoparticles modified with an organophosphorus compound were used as the solid phase for MSPE of iAs from the plant matrix. The MSPE procedure was performed using 4 mL of a buffer solution with pH 4.0, 20 mg of the nanomaterial, and a 15-min extraction time. The total As (tAs) by ICP OES was also quantified using the same MSPE procedure after solubilization of the samples by a block digester. The accuracy of tAs and iAs quantification was verified using CRM NIST 1568b (97 % and 101 % recovery, respectively). The precision (RSD < 15 %) and LOD and LOQ (1.08 and 3.70 µg kg-1, respectively) of the proposed method were satisfactory. The rice samples had tAs contents between 0.090 and 0.295 mg kg-1 and iAs mass fractions between 0.055 and 0.109 mg kg-1.

Effect of Crude Glycerin in the Feed of Lactating Goats on Concentrations of Essential and Toxic Metals in Serum, Urine, Milk, and Artisanal "Coalho" Cheese.

Goat farming is concentrated in semi-arid and tropical regions in Brazil. From 2006 to 2017, the number of goats sold in the country increased by 65.7%. The dairy products from these animals present higher digestibility, high vitamin A and B content, hypoallergenicity, and less lactose compared to dairy products from cows, in addition to having a higher sales value. Since corn and soybean meal generate an expense for feed management, crude glycerin, originating from the manufacture of biodiesel, has been studied as an energy substitute. However, this product contains heavy metals, posing risks to animal and human health. Few data are available on trace elements in biological samples and products derived from goats' milk with the dietary introduction of glycerin. The objective was to quantify aluminum (Al), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), nickel (Ni), lead (Pb), and zinc (Zn) in the serum, urine, milk, and artisanal "coalho" cheese of dairy goats fed different levels of crude glycerin in feed management. In total, 16 Saanen goats were selected, lactating females, that were distributed in four Latin squares and randomly treated with different levels of crude glycerin (0, 5, 10, and 15%). After the end of each experiment cycle, serum, urine, milk, and artisanal "coalho" cheese samples were collected at the four moments. The samples were submitted to digestion assisted by microwave radiation. The multi-element analysis was carried out using inductively coupled plasma optical emission spectrometry (ICP OES). There was no influence of crude glycerin levels replacing corn in serum, milk, urine, and artisanal "coalho" cheese. The serum concentration of the metals Cu, Fe, Zn, and Mn; urine concentrations of Cu, Zn, Mn, Mo, and Cr; and milk and artisanal "coalho" cheese concentrations of Cu, Zn, and Mn remained within the standards found in the literature. The inclusion of 5 to 15% of crude glycerin, derived from cotton oil, in the diets of dairy goats in partial replacement of corn, does not alter the concentration of essential and toxic metals in serum, urine, milk, and artisanal "coalho" cheese and does not, therefore, present a risk factor for intoxication.

Dynamics of Major and Trace Elements in Water-Soil-Tree Interaction: Translocation in Pyrus malus in Chihuahua, Mexico Using ICP-OES and Its Health Risk Implications.

The transference of metals from water irrigation and soil to plants is a possible pathway of contamination for the trophic chain. This research is focused on the distribution of 16 analytes in the water-soil-tree (Pyrus malus) interaction in an agricultural region in the state of Chihuahua in Mexico from August 2019 (first sampling) to August 2020 (second sampling). The apple variety under investigation was Golden Delicious; it was found that the trace elements of As (0.18-0.34 mg·kg-1) and Cd (0.11-0.14 mg·kg-1) in the apple were above the corresponding permissible limit, according to FAO/WHO, and Cr (0.08-0.86 mg·kg-1) was below the limit. Furthermore, the health risk implications were estimated by the Hazard Quotients (HQ) and carcinogenic risk (CR). For carcinogenic risk, As, Cd, and Cr exceeded the risk limit (CR > 10-4). This investigation as well provides a link for similar research around the globe. Major and trace elements detection was performed with the Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) technique, along with a prior homogenization of samples and microwave acid digestion. To obtain the statistical behavior, an analysis of variance and correlation was performed.

Multielement determination (essential and potentially toxic elements) in eye shadows exposed to consumption in Brazil using ICP OES.

Worldwide, cosmetics (especially eye shadows) are widely consumed and have a great impact on the economy. The aim of this study was to determine the multielement composition, focusing on essential and potentially toxic elements, in cosmetics (eye shadow) exposed to consumption in Brazil. Concentrations of 17 elements (Al, As, Ba, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, V and Zn) were determined in samples (produced in China and Brazil) using a sequential optical emission spectrometer with inductively coupled plasma (ICP OES) after acid digestion, assisted by a closed digester block (6 mL of HNO3 + 2 mL of H2O2 + 1 mL of Triton ×-100 + 1 mL of ultrapure water). The method was validated by linearity, precision, accuracy, limits of detection (LoD) and quantification (LoQ). The elements were quantified (in µg g-1): Al (852-21,900), Ba (3.47-104), Cd (1.70-6.93), Cr (< 8.53-66.6), Cu (< 0.480-14.5), Mn (92.20-1,190), Ni (< 4.23-40.7), Pb (< 2.16-5.06), Sb (1.10-10.5), Sr (0.760-46.0), Ti (32.0-440), V (< 0.85-1.7) and Zn (24.90-2,600). As, Co, Mo and Se in all the investigated samples were found to be below the LoQ values of ICP OES. In this study, regardless of sample compositions and origins (Brazilian or Chinese), high levels of Al, Cd, Cr, Cu, Mn, Ni, Pb, Sb, Ti, V and Zn were observed, exceeding the recommended maximum tolerable limits, according to Brazilian and global legislations, which may present potential risks to human health and the environment.

Multivariate optimization of microwave-assisted digestion methods for Cu and Sn determination in antifouling paints using inductively coupled plasma optical emission spectrometry.

Antifouling paints containing Cu, Zn, organotins, and many organic booster biocides may be found in ships and watercraft hulls to avoid the fouling of marine organisms. This type of paint can be harmful to the environment, therefore, the monitoring of toxic elements and compounds in antifouling paints are of great importance to access its quality and potential toxicity to the environment. Hence, this work describes the development of microwave-assisted digestion methods for the determination of Cu and Sn in antifouling paints by inductively coupled plasma optical emission spectrometry (ICP OES). The factors: sample mass and solutions of HNO3, HF, and HCl were optimized using the central composite design (CCD). Dry ashing with a muffle furnace and laser ablation-ICP-MS were used for methodological comparison with the microwave digestion-assisted ICP-OES methods. All the mixtures of acids allowed efficient extraction of the analytes; however, the one that stood out was the use of HF, HNO3, and H2O2.

Effect of losartan potassium, metformin hydrochloride, and simvastatin on in vitro bioaccessibility of Cu, Fe, Mn, and Zn in oat flour from Brazil.

BACKGROUND: The simultaneous administration of drugs with food can compromise the bioaccessibility and absorption of nutrients. The objective of this study was to evaluate the influence of the use of losartan potassium (LP), metformin hydrochloride (MH), and simvastatin (S) on the in vitro bioaccessibility of micronutrients (Cu, Fe, Mn, and Zn) in oat flour from Bahia, Brazil. METHODS: The experimental procedure consisted of the in vitro extraction of the bioaccessible fraction of Cu, Fe, Mn, and Zn in oat flour-with and without LP (50 mg), MH (500 mg), and S (20 mg)-using the unified bioaccessibility method (UBM), simulating the conditions of the gastrointestinal tract. For decomposition of the samples (oat flour and residue), a digester block with a closed system was used. To determine the total content (flour and residual fraction) and bioaccessible micronutrients, inductively coupled plasma optical emission spectrometry (ICP OES) was used. RESULTS: The bioaccessible contents (µg g-1) without the addition of drugs were: Cu 5.86 ± 0.21, Fe 32.80 ± 1.32, Mn 87.90 ± 1.90, and Zn 30.33 ± 2.05, with bioaccessibility ranging from 31.5 % for Fe to 99 % for Mn. The in vitro extraction method was validated by mass balance with recovery values from 89.78 % for Cu to 101.94 % for Mn. The range of bioaccessible contents (µg g-1) were: Cu (<4.14), Fe (32.10 ± 0.20-54.10 ± 2.03), Mn (81.40 ± 0.93-93.22 ± 0.80), and Zn (<10.80-29.11 ± 2.20). The estimation of the bioaccessibility of Cu, Mn, and Zn in oat flour were compromised in the presence of LP, MH, and S (p < 0.05). CONCLUSION: Chemical interactions can occur between drugs and micronutrients. Taken together, our results highlight that LP, MH, and S can interfere with the bioaccessibility of Cu, Fe, Mn, and Zn in oat flour in patients who use these drugs, suggesting its rational use in further investigations.

Determining the geographical origin of lettuce with data mining applied to micronutrients and soil properties

Lettuce (Lactuca sativa) is the main leafy vegetable produced in Brazil. Since its production is widespread all over the country, lettuce traceability and quality assurance is hampered. In this study, we propose a new method to identify the geographical origin of Brazilian lettuce. The method uses a powerful data mining technique called support vector machines (SVM) applied to elemental composition and soil properties of samples analyzed. We investigated lettuce produced in São Paulo and Pernambuco, two states in the southeastern and northeastern regions in Brazil, respectively. We investigated efficiency of the SVM model by comparing its results with those achieved by traditional linear discriminant analysis (LDA). The SVM models outperformed the LDA models in the two scenarios investigated, achieving an average of 98 % prediction accuracy to discriminate lettuce from both states. A feature evaluation formula, called F–score, was used to measure the discriminative power of the variables analyzed. The soil exchangeable cation capacity, soil contents of low crystalized Al and Zn content in lettuce samples were the most relevant components for differentiation. Our results reinforce the potential of data mining and machine learning techniques to support traceability strategies and authentication of leafy vegetables.

Determining the geographical origin of lettuce with data mining applied to micronutrients and soil properties

Lettuce (Lactuca sativa) is the main leafy vegetable produced in Brazil. Since its production is widespread all over the country, lettuce traceability and quality assurance is hampered. In this study, we propose a new method to identify the geographical origin of Brazilian lettuce. The method uses a powerful data mining technique called support vector machines (SVM) applied to elemental composition and soil properties of samples analyzed. We investigated lettuce produced in São Paulo and Pernambuco, two states in the southeastern and northeastern regions in Brazil, respectively. We investigated efficiency of the SVM model by comparing its results with those achieved by traditional linear discriminant analysis (LDA). The SVM models outperformed the LDA models in the two scenarios investigated, achieving an average of 98 % prediction accuracy to discriminate lettuce from both states. A feature evaluation formula, called F­score, was used to measure the discriminative power of the variables analyzed. The soil exchangeable cation capacity, soil contents of low crystalized Al and Zn content in lettuce samples were the most relevant components for differentiation. Our results reinforce the potential of data mining and machine learning techniques to support traceability strategies and authentication of leafy vegetables.(AU)

Efficiency of two digestion methods in determining the presence of metals (Cd, Cu, Cr, Pb and Zn) in geopropolis produced by Melipona scutellaris / Eficacia de dos métodos de digestión para determinar metales (Cd, Cu, Cr, Pb y Zn) en geopropóleos producidos por Melipona scutellaris / Eficiência de dois métodos de digestão para determinar metais (Cd, Cu, Cr, Pb e Zn) na geoprópolis produzida por Melipona scutellaris

Abstract This study evaluates the efficiency of acid extraction and total digestion to determine the presence of metals in geopropolis produced by the stingless bee Melipona scutellaris. Geopropolis samples were collected at five meliponaries in the city and in the metropolitan region of Salvador, Bahia State, Brazil. The sample treatment methods comprised acid extraction and total digestion. The Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) technique was used to quantify Cd, Cu, Cr, Pb, and Zn. Geopropolis samples submitted to both digestion methods showed statistical differences. For both methods, Cr and Zn showed the highest concentrations, while those of Cd were the lowest. The Cr concentration for determination by total digestion was 37.53 mg/kg, while for acid extraction it was 32.90 mg/kg. For Zn, the concentration was 17.65 mg/kg and 8.85 mg/kg for total digestion and acid extraction, respectively. The total digestion method showed the highest concentrations of the metals evaluated; however, acid extraction (USEPA 3050b) is a more straightforward procedure for metal evaluation in geopropolis samples and presented values that support the use of geopropolis as a bioindicator. The acid extraction method USEPA 3050b, in combination with detection using ICP OES, showed efficiency in analyses carried out to determine metals in geopropolis.

Resumen El objetivo de este artículo fue evaluar la eficacia da extracción ácida y de la digestión total para determinación de metales absorbidos en geopropóleos producidos por Melipona scutellaris. Se colectaron muestras de geopropóleos en cinco meliponarios localizadas en la región metropolitana del Salvador, estado de Bahia, Brasil. Se utilizaron como métodos de tratamiento para muestras, la extracción ácida y la digestión total. Para determinar los metales Cd, Cu, Cr, Pb y Zn se utilizó Espectroscopia de Emisión Óptica con Plasma Acoplado Inductivamente (ICP OES). Se encontraron diferencias estadísticas en la concentración de metales hallados en las muestras de geopropóleos sometidas a los diferentes métodos de digestión. Para ambos métodos de digestión, las mayores concentraciones de metal fueron observadas para Cr y Zn. Entre los metales evaluados Cd presentó la menor concentración. La concentración de Cr para la determinación por digestión total fue de 37,53 mg/kg y para la extracción ácida fue de 32,90 mg/ kg. Para el Zn, la concentración fue de 17,65 mg/kg y 8,85 mg/kg para la digestión total y la extracción ácida, respectivamente. El método de digestión total mostró los mayores valores para concentraciones de los metales evaluados. Entretanto, la extracción ácida, USEPA 3050b, es un procedimiento más simple para la evaluación de metales en muestras de geopropóleos y también mostró valores que pueden satisfacer la necesidad de su uso en evaluaciones de colmenas como bio-indicador. El método de extracción ácida USEPA 3050b en combinación con la detección a través de ICP OES se mostró eficiente para el análisis de metales en geopropóleos.

Resumo O objetivo deste estudo foi avaliar a eficiência da extração ácida e da digestão total para determinação de metais adsorvidos na geoprópolis produzida por Melipona scutellaris. Foram coletadas amostras de geoprópolis em cinco meliponários, situados em Salvador, Estado da Bahia e região metropolitana. Foram utilizados como métodos de tratamento das amostras a extração ácida e a digestão total. Para determinação dos metais Cd, Cu, Cr, Pb e Zn utilizou-se a Espectrometria de Emissão Óptica com Plasma Indutivamente Acoplado (ICP OES). Houve diferença estatística na concentração de metais encontrados nas amostras de geoprópolis submetidas aos diferentes métodos de digestão. Para ambos os métodos de digestão as maiores concentrações de metais foi observada para o Cr e Zn. Dentre os metais avaliados o Cd apresentou a menor concentração. A concentração de Cr para determinação por digestão total foi de 37,53 mg/kg e para extração ácida de 32,90 mg/ kg. Para o Zn, a concentração foi de 17,65 mg/kg e 8,85 mg/kg para digestão total e extração ácida, respectivamente. O método de digestão total apresentou os maiores valores para concentrações dos metais avaliados. No entanto, a extração ácida, USEPA 3050b, é um procedimento mais simples para a avaliação dos metais em amostras de geoprópolis e também apresentou valores que podem satisfazer a necessidade de utilização na avaliação deste produto da colmeia como bioindicador. O método de extração ácida USEPA 3050b em combinação com a detecção por ICP OES mostrou eficiência para análise de metais em geoprópolis.

Methodology to Quantify and Screen the Demineralization of Teeth by Immersing Them in Acidic Drinks (Orange Juice, Coca-Cola™, and Grape Juice): Evaluation by ICP OES.

Oral health problems may occur as a result of the ingestion of acid drinks. The objective of this in vitro study was to quantify and screen the concentration of potassium (K), phosphorus (P), calcium (Ca), magnesium (Mg), manganese (Mn), zinc (Zn), iron (Fe), copper (Cu), barium (Ba), lead (Pb), arsenic (As), cadmium (Cd), aluminum (Al), cobalt (Co), chromium (Cr), molybdenum (Mo), sodium (Na), nickel (Ni), selenium (Se), and vanadium (V) released from bovine incisors during an erosive challenge at different times of exposure when immersed in Coca-Cola™, orange juice, and grape juice. A total of 240 samples of bovine incisor teeth were used for the erosive challenge and allocated in groups. Digestion of drinks was performed using microwave-assisted digestion. The content in acidic drinks was monitored before and after the erosive challenge at exposure times of 1, 5, and 60 min using inductively coupled plasma optical emission spectrometry (ICP OES). The drinks' pH varied slightly during the erosive challenge but remained below the critical value of pH 5 to cause tooth demineralization. The concentrations of elements released from the bovine incisors during the in vitro erosive challenge depend on exposure times when immersed in acidic beverages. For some elements such as Ca, Mn, Zn, Fe, Cu, Ba, Pb, As, and Cd, quantified in acidic drinks, grape juice had greater erosive potential than Coca-Cola™ and orange juice. Quantification and monitoring of chemical elements in bovine teeth can be performed considering a longer erosive time and other types of acidic drinks. Further analysis using human teeth is still not available and must be conducted. The demineralization of teeth not only occurs in acidic beverages; physical and chemical factors play other roles and should be investigated.

Evaluation of slurry sampling preparation of enteral nutrition formulations for multielement determination using inductively coupled plasma optical emission spectrometry.

An analytical procedure for the multielement determination in enteral nutrition formulations employing slurry sampling and inductively coupled plasma optical emission spectrometry (ICP OES) is proposed. A two-level full-factorial design was applied to assess the influence of the presence of stabilizing agents (HNO3, Triton X-100 and ethanol) on the composition of the slurry. Multiple response was established as a dependent variable. The experimental conditions for the preparation of the slurry were: 2.0 mL of sample and 8.0 mL of 10% (v/v) HNO3. The limits of detection (LOD) were 5; 9; and 10 µg L-1 for Cu, Fe, Zn, respectively. For P, and K, the LOD were 8 and 24 mg L-1, respectively. The method was applied for the analysis of three enteral nutrition formulation samples and the obtained concentrations ranges were (in mg L-1): 0.41-0.43 (Cu), 2.0-2.9 (Fe), 1.7-3.1 (Zn), 682-1409 (K), and 217-344 (P).

Simultaneous quantification of Cd(II) and Pb(II) in surface marine sediments using Ag-Hg and Ag-Bi nanoalloys glassy carbon modified electrodes.

The evaluation of glassy carbon (GC) electrodes modified with a Nafion (Nf) film and doped with nanoalloys (Nys) deposits of Ag-Hg and Ag-Bi and their application to determination of Cd (II) and Pb(II) in marine sediments, is described. Deposited Ag-Hg and AgBi Nys have a size of approximately ~80 nm dispersed and embedded inside the booths of the Nf net, while other of them remained on Nf net surface. For the AgBiNysNf-GC electrode, a detection limit (DL), 3 s criterion, slightly higher than for the AgHgNysNf-GC modified electrode was obtained. Accuracy of measurements was asserted by comparison with quantification of Cd and Pb in three sets of marine sediments samples previously analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES). The values of the standard deviation and the coefficients of variation are very low, and also comparable between the different determinations.

Metallic elements in aquatic herpetofauna (Crocodylia; Testudines) from a lentic Atlantic rainforest environment in northeastern Brazil.

In the present study, Fe, Cu, Cr, Cd, Pb, Ni, and Al concentrations in Caiman latirostris and Testudines blood from the Tapacurá reservoir, Pernambuco, Brazil, were investigated. Blood was acid digested with HNO3, and metals were determined by ICP-OES and FAAS. Lead showed concentrations below the established limit of detection. Eighty animals were evaluated, forty from each group. The levels of all elements were statistically significant when compared between the two studied taxa (p < 0.05). In caimans, significant differences between young and adults were observed for chromium (p = 0.0539) and aluminum (p = 0.0515). Testudines showed no statistically significant differences for the variable age structure. Gender did not influence metal concentrations detected in the present study for either group. Differences between species of testudines were significant for Fe between Mesoclemmys tuberculata vs Phrynops geoffroanus (p = 0.0932) and Kinosternon scorpioides vs Phrynops geoffroanus (p = 0.063). The inter-elementary correlations showed statistically significant differences between the elements Cr vs Al (R2 = 0.52), Cr vs Cd (0.43), Cd vs Cu (R2 = 0.41), Ni vs Cu (R2 = 0.31), Ni vs Cr (R2 = 0.30), Al vs Cd (R2 = 0.27), and Cd vs Fe (R2 = 0.26). It is concluded that blood is an excellent predictor of metals in crocodilians and testudines in the Tapacurá reservoir, with statistically significant differences when correlated to concentrations such as size and species studied. In addition, it evidenced data that prove the exposure of these animals to metals, with strong inter-elementary correlations and opening doors for future studies that seek to understand possible biological effects caused in the studied taxa.

Multi-element contamination in soils from major mining areas in Northeastern of Brazil.

Mining has become one of the main factors in the global biogeochemical cycle of potentially toxic elements. Therefore, it is considered one of the anthropogenic activities with the greatest negative impact on the environment. These impacts are maximized in semiarid regions, where mining activities can lead to soil degradation and decrease in land productivity. This study aimed to assess the level of contamination in natural, urban, and agricultural soils of three important mining areas, where approximately 80,000 people live, and pollution levels have never been determined before. For this purpose, soil samples were collected around iron, uranium, and vanadium mines, as well as in the main human settlements of the region. The concentrations of 34 elements were determined by instrumental neutron analysis activation (INAA) and inductively coupled plasma optical emission spectrometry (ICP OES) techniques. Pollution indices (CF, EF, mCd, PLI, and REEP) revealed that there is a moderate to heavy level of pollution for 89% of the analyzed elements. Additionally, an extreme contamination level was observed in 78% of the samples, for at least one element. Statistical analyses were performed to identify patterns in the distribution and common sources of pollution. The results suggest that the concentrations for Al, Ba, Hf, Na, Pb, Rb, REE, Ta, Th, U, Zn, and Zr are associated with geogenic causes. However, the influence of anthropogenic sources such as agriculture and mining on the accumulation of these elements in soils should not be disregarded. In contrast, the contents of As, Br, Cd, Co, Cr, Cs, Cu, Fe, K, Mn, Ni, Sc, Ti, and V reflect the direct impact of anthropogenic sources.

Data on metals, nonmetal, and metalloid in the samples of the canned tuna and canned sardines sold in Brazil.

The safety of food is a matter of global concern today. Continuous monitoring of canned tuna and canned sardines quality is essential regarding metal, nonmetal, and metalloid content. In this article, we present the data on the elemental content obtained in canned tuna and canned sardines by using inductively coupled plasma optical spectrometry (ICP OES), as well as the data on Pollution Index (PI) and Health Risk Index (HRI). Pollution index and health risk index are tools used to assess elemental contamination in the environment and food. A total of 6 metals (Al, Ba, Ca, Cu, Fe, and Zn), one nonmetal (Se), and one metalloid (As) were quantified in the samples of the canned tuna and canned sardines. For elements as Al, Cu, Fe, and Se, PI > 1. In addition, Cd, Co, Cr, Ni, Zn, and Pb have PI values less than 1. The HRI values for some canned tuna samples were above 1 for elements such as Al, Ba, Ca, and As. For canned sardines, the elements Cr, Ni, and As showed HRI values >1.