Rehabilitation of mandibular resected patients using fixed immediately loaded corticobasal implant -supported prostheses. A case series.

INTRODUCTION AND IMPORTANCE: Aliments such as congenital conditions, pathological, and iatrogenic circumstances may result in mandibular defects that can severely disturb the patients' oral health, functions (mastication, speech), aesthetics, and quality of life and present a rehabilitating challenge. CASE PRESENTATION: we present a multidisciplinary treatment approach for three cases presented with mandibular resection as a consequence of cystic, benign, and malignant tumour eradication that were rehabilitated with immediately loaded fixed corticobasal implant-supported prostheses and a follow-up period of 5,5 and 4 years. The reported cases present with excellent implant survival, along with healthy peri-implant tissues, stable prostheses, enhanced speech, chewing ability, aesthetics, superior patient satisfaction, and improved overall self-esteem. CLINICAL DISCUSSION: A multidisciplinary oral and maxillofacial team is mandatory for the successful rehabilitation of patients with mandibular resection and to restore soft and hard tissue loss. The reported treatment modality offers the patient immediate fixed implant-supported prostheses omitting the need for a bone grafting procedure, with optimum peri-implant tissue health, excellent biomechanical and prosthetic results, and significant improvement in function and satisfaction. CONCLUSION: Corticobasal fixed implant-supported prostheses can be a reliable treatment modality for mandibular resection, resulting in notable enhancements in the patients' oral health, appearance, mastication, speech, and self-esteem.

Wear at the implant-framework interface between titanium implant platform and the additively manufactured titanium and cobalt-chromium frameworks.

PURPOSE: To measure the wear at the implant interface between the Grade 4 titanium (Ti) of the implant and frameworks fabricated using two additively manufactured alloys (Ti alloy and cobalt-chromium [Co-Cr]) pre- and post-artificial aging. MATERIAL AND METHODS: Three-unit frameworks supported by two implants were additively manufactured (Atlantis; Dentsply Sirona) using Ti and Co-Cr dental alloys. Two implants (OsseoSpeed EV, Astra Tech; Dentsply Sirona) were torqued on each non-engaging framework. The assembled implant-frameworks were secured into polyurethane foam blocks. Groups were created based on the material and surface assessed: framework (Ti-framework and Co-Cr-framework groups) and implant (Ti-implant group). Two subgroups were created depending on the location: premolar (PM) and molar (M). Computed tomography images were obtained pre- (as manufactured) and post-simulated mastication procedures. The pre- and post-simulated mastication files of each specimen were aligned using the best-fit algorithm using a metrology program. Wear was measured by calculating the volumetric discrepancies at the implant interface on 64 measurement points per area analyzed. Three-way ANOVA and Tukey tests were used to analyze the data (α = 0.05). RESULTS: The mean volumetric discrepancy values ranged from 0.8 to 3.1 µm among all the subgroups tested. The group (framework vs. implant) (p < 0.001) and tooth location (p < 0.001) were significant factors of the mean volumetric discrepancy values obtained. The framework group presented with significantly lower volumetric discrepancy mean values (1 µm) compared with the implant group (3 µm), whereas the premolar area obtained significantly lower mean volumetric discrepancy values (1.9 µm) compared with the molar location (2.3 µm). CONCLUSIONS: Volumetric discrepancies were found at the implant-framework interface tested between the pre- and post-artificial aging measurements ranging from 1 to 3 µm after 1,200,000 cyclic loading that simulated approximately 12 months of function.

A biologically oriented preparation technique (BOPT) for immediate posterior implant placement, immediate provisionalization, and definitive implant crown fabrication: A complete digital workflow.

OBJECTIVE: Immediate implants and immediate alveolar sealing have been a widely utilized treatment with high predictability and biological advantages. The improvement in technology has made it possible to simplify clinical processes. The aim of the present report was to describe the complete digital workflow of the Biologically oriented preparation technique for immediate posterior implant, immediate provisionalization and fabrication of definitive implant crowns. CLINICAL CONSIDERATIONS: The surgical process and prosthetic management to preserve the gingival contours of the extracted natural tooth during immediate implant placement and provisionalization are described. Additionally, during the same clinical intervention, the definitive intraoral digital implant scans for capturing the implant position, peri-implant tissue contours, adjacent and antagonist dentition, and profile emergence of the interim implant crown are captured for the fabrication of the definitive crown. CONCLUSIONS: Based on the technique described, the immediate implant placement and provisionalization in the posterior area provides biological and clinical advantages, reducing the number of abutment-implant disconnections and the number of clinical appointments, as well as increases patient comfort. CLINICAL SIGNIFICANCE: The present article describes a technique for an immediate implant placement and provisionalization in the posterior region for maintaining the gingival architecture of the extracted tooth. During the same appointment, the implant position, peri-implant tissue contours, and adjacent and antagonist dentition, and profile emergence of the interim implant crown are captured by using an intraoral scanner and used for the fabrication of the definitive crown. This technique aims to reduce the number of abutment-implant disconnections and clinical appointments.

Anterior Hyperfunction by Mandibular Anterior Teeth: A Narrative Review.

"Combination syndrome", defined by Kelly in 1972, is a challenging condition observed in a patient with an edentulous maxilla and a partially edentulous mandible with only mandibular anterior teeth. "Anterior hyperfunction syndrome" is regarded as a synonym of combination syndrome and was first described in 1994. Although these terms have been well known, the definition of "anterior hyperfunction" has not been described yet. This narrative review focused on anterior hyperfunction and discussed the etiology and the clinical managements. An electronic bibliographic search for this literature review was conducted in addition to the review of our clinical cases. The previous reports indicated that combination syndrome with all five features was rarely observed. The patients with anterior hyperfunction generally showed the loss of posterior occlusal supports and the loss of vertical dimension of occlusion. To manage anterior hyperfunction, these conditions should be improved using conventional removable prostheses and implant-supported prostheses. Anterior hyperfunction is attributed to mandibular anterior teeth and some interventions for mandibular anterior teeth are required in many cases. Additionally, it must be noted that implant-supported prostheses may lead to anterior hyperfunction. In conclusion, comprehensive approaches for the remaining teeth and the prostheses will be required to manage this complex condition.

Comparison of the Surface Roughness of CAD/CAM Metal-Free Materials Used for Complete-Arch Implant-Supported Prostheses: An In Vitro Study.

The roughness of the intra-oral surfaces significantly influences the initial adhesion and the retention of microorganisms. The aim of this study was to analyze the surface texture of four different CAD-CAM materials (two high-performance polymers and two fifth-generation zirconia) used for complete-arch implant-supported prostheses (CAISPs), and to investigate the effect of artificial aging on their roughness. A total of 40 milled prostheses were divided into 4 groups (n = 10) according to their framework material, bio.HPP (B), bio.HPP Plus (BP), zirconia Luxor Z Frame (ZF), and Luxor Z True Nature (ZM). The areal surface roughness "Sa" and the maximum height "Sz" of each specimen was measured on the same site after laboratory fabrication (lab as-received specimen) and after thermocycling (5-55 °C, 10,000 cycles) by using a noncontact optical profilometer. Data were analyzed using SPSS version 28.0.1. One-way ANOVA with multiple comparison tests (p = 0.05) and repeated measures ANOVA were used. After thermocycling, all materials maintained "Sa" values at the laboratory as-received specimen level (p = 0.24). "Sz" increased only for the zirconia groups (p = 0.01). B-BP exhibited results equal/slightly better than ZM-ZF. This study provides more realistic surface texture values of new metal-free materials used in real anatomical CAISPs after the manufacturing and aging processes and establishes a detailed and reproducible measurement workflow.

Milled PMMA, a Material for Long-Term Implant Supported Fixed Complete Dental Prostheses.

Traditionally, metal-ceramics, metal-reinforced acrylics, and more recently full-contour or layered zirconia have been the materials of choice for definitive fixed implant-supported rehabilitations. Polymethyl Methacrylate (PMMA) is commonly used in implant dentistry for the fabrication of implant-supported interim prostheses and as milled or 3D printed prototypes. This article describes a novel protocol to prosthetically restore a completely edentulous patient following a digital workflow, with fixed, screw-retained, implant-supported prostheses fabricated from CAD/CAM milled polymethyl methacrylate (PMMA), with no metal substructure. After two years follow up in terms of esthetics, phonetics, function and biological tissue response, the outcome remains functional and free of mechanical, biomechanical or biological complications. The aim of this article is to illustrate the feasibility of using milled PMMA as viable definitive prosthetic material for the fixed implant rehabilitation of edentulous patients.

Conventional and Digital Impressions for Fabrication of Complete Implant-Supported Bars: A Comparative In Vitro Study.

Obtaining accurate models and well-fitting prostheses during the fabrication of complete implant-supported prostheses has been a significant challenge. Conventional impression methods involve multiple clinical and laboratory steps that can lead to distortions, potentially resulting in inaccurate prostheses. In contrast, digital impressions may eliminate some of these steps, leading to better-fitting prostheses. Therefore, it is important to compare conventional and digital impressions for producing implant-supported prostheses. This study aimed to compare the quality of digital intraoral and conventional impressions by measuring the vertical misfit of implant-supported complete bars obtained using both types of techniques. Five digital impressions using an intraoral scanner and five impressions using elastomer were made in a four-implant master model. The plaster models produced with conventional impressions were scanned in a laboratory scanner to obtain virtual models. Screw-retained bars (n = five) were designed on the models and milled in zirconia. The bars fabricated using digital (DI) and conventional (CI) impressions were screwed to the master model, initially with one screw (DI1 and CI1) and later with four screws (DI4 and CI4), and were analyzed under a SEM to measure the misfit. ANOVA was used to compare the results (p < 0.05). There were no statistically significant differences in the misfit between the bars fabricated using digital and conventional impressions when screwed with one (DI1 = 94.45 µm vs. CI1 = 101.90 µm: F = 0.096; p = 0.761) or four screws (DI4 = 59.43 µm vs. CI4 = 75.62 µm: F = 2.655; p = 0.139). Further, there were no differences when the bars were compared within the same group screwed with one or four screws (DI1 = 94.45 µm vs. DI4 = 59.43 µm: F = 2.926; p = 0.123; CI1 = 101.90 µm vs. CI4 = 75.62 µm: F = 0.013; p = 0.907). It was concluded that both impression techniques produced bars with a satisfactory fit, regardless of whether they were screwed with one or four screws.

The Effects of a Mandibular Overdenture on Edentulous Patients' Quality of Life: A Clinical Study.

Edentulous patients' quality of life can be greatly diminished by the use of a badly fitting removable prosthesis, as many aspects of social life become notably impaired. The object of this study was to evaluate if treating these patients with a two implants mandibular overdenture could improve their quality of life as measured with the Italian version of the OHIP-14 (Oral Health Impact Profile). Edentulous patients, in good clinical condition, were selected. Two implants were placed following the recommended guidelines and three months after new mandibular dentures were manufactured, implants were uncovered and connected to the prosthesis using LOCATOR abutments. OHIP-14 was measured at baseline, one month after delivery and one year after delivery. An improvement was observed even after one month (with a mean reduction of 17 points in OHIP) and that improvement appeared to be stable at the one-year follow-up. Mandibular overdentures can improve a patient's quality of life when compared to a tissue-supported removable complete denture, as long as the patient is subjected to an appropriate follow-up as the retentive rings of the attachment can deteriorate even after two years and lose a great deal of retentive capabilities.

EFFECT OF FRAMEWORK MATERIAL ON THE CLINICAL OUTCOMES OF FULL ARCH IMPLANT SUPPORTED PROSTHESES REMAINS UNQUANTIFIABLE.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Delucchi, F.; De Giovanni, E.; Pesce, P.; Bagnasco, F.; Pera, F.; Baldi, D.; Menini, M. Framework Materials for Full-Arch Implant-Supported Rehabilitations: A Systematic Review of Clinical Studies. Materials 2021, 14, 3251. https:// doi.org/10.3390/ma14123251 SOURCE OF FUNDING: This research received no funding. TYPE OF STUDY/DESIGN: Systematic Review (SR).

Electromyographic Evaluation of Muscle Activity in Patients Rehabilitated with Full Arch Fixed Implant-Supported Prostheses.

Background and Objectives: Implant rehabilitation of complete edentulous arches has become more and more popular because of the increased access of the population to this type of treatment. Furthermore, the development of new rehabilitation procedures can be applied in most clinical cases, including in those with severe atrophy. Hence, this study aimed to assess the functional changes that can occur in the stomatognathic system after implant rehabilitation procedures. Materials and Methods: A total of 63 patients were accepted in the study. They were divided into a first control (dentate) group (CG) and a second study group (edentulous, SG). For the latter, 30 patients received 204 two-stage implants immediately loaded with provisional prostheses. Surface electromyography (EMG) was assessed at the time of prostheses fixation, while for some patients it was applied six months after the fixation of the fixed prostheses, as well. These supplemental investigated patients formed a third, follow-up study group (FSG). All assessments were performed during the processes of clenching and mastication. The obtained data of the two study groups, SG and FSG, were compared with those of the control group, CG. Results: No statistical differences were found in the electrical muscular activity between the study and control groups during both clenching and mastication (p > 0.05). In addition, there were no differences within the same study group, both initially and after 6 months. The only changes were noticed between static and dynamic values for the right masseter muscle in the follow-up group FSG (p = 0.008). Deviations of the overlapping coefficients were similar for all groups (p = 0.086): for CG, 20.5%, median 11.1 (min. 0, max. 104); for SG, 21.4%, median 12.2 (min. 0, max. 103); for FSG, 36.1%, median 26.9 (min. 0, max. 160). This revealed no neuromuscular adaption to the prostheses. Conclusions: Implant-prosthetic rehabilitation led to an EMG activity that was similar to that of dentate patients immediately after the placement of the fixed implant-supported prostheses. Moreover, the measured values did not change after six months of functioning for all evaluated parameters. This may point to an immediate restoration of the muscle contraction capacity, without the necessity of adaptation over time. The study serves as an argument for the application and reliability of the immediate fixed implant-supported prostheses from the perspective of muscle adaptation and functioning.

Evaluation of physical changes due to simulated loading on prosthetic screw supporting 4- and 6-unit implant prosthesis: An in vitro study.

Aim: Screw loosening is a very common cause of failures in implant prosthodontics. In order to avoid screw fracture, it is imperative to understand the mechanical behavior of the screw and the dynamics it is subjected to intraorally. The present study was conducted to qualitatively evaluate and compare the morphological changes, surface defects, and cracks observed under a scanning electron microscope (SEM) in the prosthetic screw. Settings and Design: Two Stainless steel edentulous mandible models were fabricated on the basis of all on four and all on six concepts by using CAD design. Screw retained prosthesis were fabricated for both the models and total number of 80 prosthetic screws were made up of Ti6Al4V. Materials and Methods: Eighty prosthetic screws (N = 80) used in four- and six-unit implant-retained cast hybrid denture were subjected to cyclic loading of 1.5 million cycles and 3 million cycles, simulating a 5 and 10 years of usage, respectively. Once the simulated cycles had been completed in all subgroups, each prosthetic screw was inspected under SEM (×150-×1000) for any changes. Statistical Analysis: The data thus obtained were statistically analyzed using SPSS 12.0 software and P < 0.005 was considered statistically significant. Results: The study revealed statistically significant (P < 0.005) changes (like morphological changes, surface defects, crack initiation, and propagation) in the prosthetic screws after exposing them to predefined test conditions (P < 0.001). Conclusion: It can be concluded that the prosthetic screws need to be changed after a period of clinical use of 5 years irrespective of the number of implants used for rehabilitation. Further, the tilt of the abutment and numbers of implants also contribute to the stresses on the implant-supported prostheses.

Orthognathic correction and corticobasal implant-supported prostheses as a treatment modality for partial edentulism with mandibular prognathism: A case report and review of literature.

INTRODUCTION: Mandibular prognathism manifests as elongation of the mandible in the anteroposterior direction, resulting in a sunken appearance of the middle third of the face and sad look of the eyes. It adversely affects esthetics, function, and oral health, reducing the patients' self-esteem. It therefore presents a significant challenge. PRESENTATION OF CASE: A 23-year-old woman presented with prognathic features characterized by mandibular protrusion, maxillary retrusion, a prominent chin, and reduce self-esteem. Intraoral examination revealed multiple extracted teeth, severe fracture of the crown at 23, mobility of the fixed prosthesis on 13, 14, 15, and 16, a root stump of 18, and periodontally compromised teeth (31, 32, 33, 41, and 42). A multidisciplinary team formulated the following treatment plan: stage 1, orthognathic osteotomy to retrude the mandible at 34 and 44; stage II, fabrication of transitional acrylic partial dentures; and stage III: fabrication of definitive corticobasal implant-supported prostheses. The patient was delighted with the treatment and complied with the oral hygiene instructions and follow-up program. After 7 years of function, the patient presented without complaints and exhibited significant improvement in oral health, self-esteem, and quality of life. DISCUSSION: The management of mandibular prognathism requires a multidisciplinary approach. The treatment implemented was considered the optimal option that aligned with the recommendations of several researchers to reduce facial disfigurement and rehabilitate the edentulous state. CONCLUSION: The use of corticobasal implant-supported prostheses for the rehabilitation of patients with partial edentulism can significantly improve the treatment outcome following orthognathic surgery in cases with mandibular prognathism.

Comparison of porcelain veneer fracture in implant-supported fixed full-arch prostheses with a framework of either titanium, cobalt-chromium, or zirconia: An in vitro study.

OBJECTIVES: The aim of this study was to compare porcelain veneer strength on screw-retained implant-supported fixed full-arch prostheses with a framework of either milled titanium (Ti), cobalt-chromium (CoCr), and yttria-stabilized zirconia (Y-TZP) in an in vitro loading model. MATERIALS AND METHODS: Fifteen screw-retained maxillary implant-supported full-arch prostheses (FDP), five each of Ti, CoCr, and Y-TZP frameworks with porcelain veneers were included. All FDPs were subjected to thermocycling before loading until fracture of the veneer. The load was applied at the distal fossa of the occlusal area of the pontic replacing 24. Fracture loads were analyzed, and the fracture quality was assessed. Statistical analysis on the fracture load was performed using Kruskal-Wallis test. The statistical significance was set at p < .05. RESULTS: There was no statistical significance found between the groups regarding fracture load. The highest and lowest load was seen within the CoCr FDP, varying between 340 and 1484 N. Different types of fracture appearances were seen. The Y-TZP FDPs had a higher number of fractures locally in the loaded area while CoCr and Ti more often showed cracks in the anterior region, at a distance from the loaded area. CONCLUSIONS: Within the limitations of this study, the conclusion was that framework material may affect the fracture behavior of maxillary full-arch bridges; however, there were no differences in veneer fracture strength when frameworks of Ti, CoCr, or Y-TZP were compared.

Biomechanical finite element analysis of short-implant-supported, 3-unit, fixed CAD/CAM prostheses in the posterior mandible.

OBJECTIVE: To assess the biomechanical effects of different prosthetic/implant configurations and load directions on 3-unit fixed prostheses supported by short dental implants in the posterior mandible using validated 3-D finite element (FE) models. METHODS: Models represented an atrophic mandible, missing the 2nd premolar, 1st and 2nd molars, and rehabilitated with either two short implants (implant length-IL = 8 mm and 4 mm) supporting a 3-unit dental bridge or three short implants (IL = 8 mm, 6 mm and 4 mm) supporting zirconia prosthesis in splinted or single crowns design. Load simulations were performed in ABAQUS (Dassault Systèmes, France) under axial and oblique (30°) force of 100 N to assess the global stiffness and forces within the implant prosthesis. Local stresses within implant/prosthesis system and strain energy density (SED) within surrounding bone were determined and compared between configurations. RESULTS: The global stiffness was around 1.5 times higher in splinted configurations vs. single crowns, whereby off-axis loading lead to a decrease of 39%. Splinted prostheses exhibited a better stress distribution than single crowns. Local stresses were larger and distributed over a larger area under oblique loads compared to axial load direction. The forces on each implant in the 2-implant-splinted configurations increased by 25% compared to splinted crowns on 3 implants. Loading of un-splinted configurations resulted in increased local SED magnitude. CONCLUSION: Splinting of adjacent short implants in posterior mandible by the prosthetic restoration has a profound effect on the magnitude and distribution of the local stress peaks in peri-implant regions. Replacing each missing tooth with an implant is recommended, whenever bone supply and costs permit.

'Role of the modulating factors on the self-perceived OHRQoL of fully dentate subjects and wearers of screw-retained and cement-retained implant-supported FPDs: A cross-sectional study'.

OBJECTIVES: This research aimed to compare the oral health-related quality of life (OHRQoL) between fully dentate subjects and edentulous patients wearing implant-supported fixed partial dentures (i-FPDs). The clinical conditions of both types of restorations were evaluated. METHODS: Participants were assigned to: Group-1 (SR, n = 50): screw-retained i-FPD wearers; Group-2 (CR, n = 50): cement-retained i-FPD wearers; and Group-3 (ND, n = 50): dentate subjects with a healthy natural dentition (controls). Patients answered the OHIP-14sp and QoLIP-10 questionnaires. Data related to sociodemographics, prosthesis features, peri­implant status, complications, and subjective evaluations, were compiled. Potential modulators of the OHRQoL and the i-FPDs' clinical conditions were assessed using non-parametric tests (α= 0.05). RESULTS: ND individuals were the least satisfied (OHIP-14sp; p< 0.001). Both prosthodontic groups reported similar levels of wellbeing, excluding the speaking difficulties, which were lower for SR wearers as shown by both scales (p = 0.001). The most discontented patients (OHIP-14sp) were: women (p = 0.022), under 65 years (p = 0.03), without partner (p< 0.001) and having a crown (p = 0.033). The level of education/schooling also affected the OHIP-14sp scores (p< 0.001). Implant mobility and peri­implantitis were more frequent among CR wearers (p-values= 0.008 and 0.05, respectively). CONCLUSIONS: The OHRQoL of both prosthodontic groups was comparably higher than that of the dentate subjects, who were the most nonconformist. The self-perceived satisfaction was mainly modulated by sociodemographic factors. CLINICAL SIGNIFICANCE: Overall, the retention system did not impact the OHRQoL, prosthetic problems, and subjective evaluations of i-FPD wearers. However, the cementation may increase the risk of peri­implant diseases.

Digital Workflow for Full-Arch Immediate Implant Placement Using a Stackable Surgical Guide Fabricated Using SLM Technology.

The failing dentition of partially edentulous individuals may be used as an initial reference for stackable restrictive surgical guides during full-arch immediate implant placement. The stackable guide option derived from a digital workflow increases the predictability of the performance of bone reduction, immediate implant placement, and immediate loading of provisional implant-supported fixed dental prostheses. The present paper aims to report a practical approach to design and produce a metal framework with occlusal rests to facilitate the use of a tooth-supported surgical guide when full-arch immediate implant placement is indicated in patients with failing dentition.

Clinical Behavior and Complications of Mandibular Full-Arch Fixed Dental Prostheses Supported by Three Dental Implants. A Systematic Review and Meta-Analysis.

This systematic review and meta-analysis set out to assess the clinical behavior of mandibular implant-supported fixed complete dental prostheses (ISFCDP) on three dental implants by analyzing implant and prosthetic survival rates, marginal bone loss, biological/technical complications, and patient-reported outcomes. The review was conducted according to PRISMA guidelines. Electronic searches were conducted in the Medline (PubMed), Web of Science, and Cochrane databases, complimented by a manual search in specialist journals for relevant articles published up to February 2021. The Newcastle-Ottawa Quality Assessment Scale tool was used to assess the quality of evidence in the studies reviewed. The study included 13 articles with 728 patients treated with 2184 implants. A mean implant survival rate of 95.9% (95% CI: 94.6-97.3%) and a prosthetic survival rate of 97.0% (95% CI: 95.7-98.3%) were obtained over 1-6-year follow-up periods. Mandibular implant-supported fixed complete dental prostheses on three dental implants would appear to be a viable option for restoring the edentulous mandible in comparison with mandibular ISFCDP on more than three implants. Further comparative studies are needed, with adequate protocols, as well as sufficient sample sizes and follow-up periods to confirm these findings.

Shear bond strength between gingival composite resin and glazed gingival porcelain for implant-supported prostheses.

This study determined the shear bond strength (SBS) between an indirect gingival composite resin and glazed gingival porcelain after various surface treatments. A total of 176 porcelain disks with natural glazing were used and assigned to one of four groups: no surface treatment, airborne-particle abrasion, hydrofluoric acid etching, or a combination of airborne-particle abrasion followed by hydrofluoric acid etching. Each group was divided into two subgroups: one subgroup was unprimed, and the other was silanized. An indirect composite resin was then bonded to the porcelain disks. Half of the specimens in each group (n = 11) were exposed to 5000 thermocycles. SBSs were measured, and data were analyzed with the Kruskal-Wallis and Steel-Dwass tests. Among silanized specimens, those treated with the combination of airborne-particle abrasion and hydrofluoric acid etching exhibited the highest bond strengths both before and after thermocycling. However, the SBS values of the silanized and unprimed hydrofluoric acid etched specimens did not differ significantly. Airborne-particle abrasion followed by hydrofluoric acid etching with silane application yielded stronger, more durable bonds between the indirect gingival composite resin and glazed gingival porcelain.

Comparative Analysis of Peri-Implant Bone Loss in Extra-Short, Short, and Conventional Implants. A 3-Year Retrospective Study.

OBJECTIVE: To evaluate the influence of implant length on marginal bone loss, comparing implants of 4 mm, 6 mm, and >8 mm, supporting two splinted crowns after 36-month functional loading. MATERIALS AND METHODS: this retrospective clinical trial evaluated the peri-implant behavior of splinted crowns (two per case) on pairs of implants of the same length placed in the posterior maxilla (molar area). Implants were divided into three groups according to length (Group 1: extra-short 4 mm; Group 2: short 6 mm; Group 3: conventional length >8 mm). Marginal bone loss was analyzed using standardized periapical radiographs at the time of loading and 36 months later. RESULTS: 24 patients (19 women and 5 men) were divided into three groups, eight rehabilitations per group, in the position of the maxillary first and second molars. The 48 Straumann® Standard Plus (Regular Neck (RN)/Wide Neck (WN)) implants were examined after 36 months of functional loading. Statistical analysis found no significant differences in bone loss between the three groups (p = 0.421). No implant suffered biological complications or implant loss. Long implants were associated with less radiographic bone loss. CONCLUSIONS: extra-short (4 mm); short (6 mm); and conventional length (>8 mm) implants in the posterior maxilla present similar peri-implant bone loss and 100% survival rates in rehabilitation, by means of two splinted crowns after 36 months of functional loading. Implants placed in posterior positions present better bone loss results than implants placed in anterior positions, regardless of the interproximal area where bone loss is measured. Conventional length (>8 mm) implants show better behavior in terms of distal bone loss than short (6 mm) and extra-short (4 mm) implants.

Rehabilitation of an irradiated marginal mandibulectomy patient using immediately loaded basal implant-supported fixed prostheses and hyperbaric oxygen therapy: A 2-year follow-up.

INTRODUCTION: The prosthetic rehabilitation of mandibular defects owing to tumor resection is challenging, especially when the patient has undergone subsequent radiotherapy. PRESENTATION OF CASE: A 46-year old male presented with a marginal mandibular resection. Following surgery, the patient received adjunctive radiation therapy with a total dose of 70 grays. On clinical examination, the patient presented with severely resorbed edentulous jaws, with an anterior marginal mandibular resection and an obliterated vestibular sulcus. The panoramic radiograph showed a hypocellularity of the maxillary and mandibular bones. A multidisciplinary team was formed, and a treatment plan was formulated which involved the construction of a vestibuloplast stent, and the application of 20 hyperbaric oxygen sessions before implant treatment and 10 more sessions after implant insertion. A total of 16 basal cortical screw implants were inserted to support the fixed prostheses, and a vestibuloplasty was performed to improve esthetics. No complications were observed, and at the 2-year follow-up, the patient presented with excellent peri-implant soft tissue health; increased bone-implant contact; and stable, well-functioning prostheses. DISCUSSION: The construction of a stable, retentive, well-supported removable prosthesis may be complicated in cases of comprehensive mandibular resection. Basal implants can eliminate the need for bone grafting, and reduce the treatment period required for providing a fixed prosthesis. CONCLUSION: To our knowledge this is the first evidence reporting the use of fixed basal implant-supported prostheses in irradiated bone, in conjunction with hyperbaric oxygen therapy. A treatment modality that significantly improves the peri-implant tissue health, and ensures an excellent implant-bone contact.