Utilizing Laser-Induced Fluorescence to Evaluate the Efficiency of Carbon Dioxide and Diode Lasers in Dentin Sealing after Tooth Preparation: An in-vitro Study.

Adhesive dentistry has made it feasible to design restorations with high aesthetic qualities and little invasiveness. However, the freshly cut dentin after the tooth preparation needs to be sealed to prevent its contaminations, bacterial leakage, and hypersensitivity. Consequently, the immediate dentin sealing (IDS) method has been advised. This study examines different dentinal tubule sealing methods via CO2 laser, diode laser (980-nm) and a two-step self-etch adhesive system applied directly to the fresh cut dentin preceding the placement of the provisional phase. The sealing efficiency of each laser and bond system was evaluated based on the laser-induced fluorescence (LIF) properties and image analysis by scanning electron microscopy. Moreover, the obtained LIF spectra were evaluated using partial least square progression. A two-step adhesive containing a high concentration of S-PRG fillers produced a thick layer that was not perfectly uniform at all sites due to uneven filler distribution in the bond with totally and partially closed dentinal tubules. However, the peaks of the LIF spectra dropped after applying laser because of its sealing effectiveness. Accordingly, CO2 and diode lasers have strong evidence in dentinal tubule sealing and a definitive treatment modality for dentinal hypersensitivity. Moreover, IDS with an adhesive system is superior in occluding dentinal tubules in a biomimetic manner based on its filler content and bioactive properties.

Using a three-dimensional-printed device with the patient's maxillary dental impression allows to perform minimally invasive brain biopsies in dogs and cats: a preliminary study.

OBJECTIVE: To develop an innovative process for stereotactic brain biopsies in dogs and cats that would provide a definitive diagnosis and optimize the management of patients with brain lesions. ANIMALS: 4 dogs and 1 cat diagnosed with 1 or more brain lesion(s) underwent brain biopsies between March 24, 2023, and October 25, 2023. METHODS: Based on trajectories selected on images of MRI and CT scan performed on each patient, a computerized software program was used to design a 3-D-printed patient-specific device with maxillary dental impression located on a baseplate to secure the patient's head and with insertion ports for the biopsy instrumentations located on a C-arm. As proof of concept, the device was successfully used in 2 cadavers before being used on clinical patients. All biopsy samples were submitted for histopathological examination. RESULTS: Histological diagnosis was obtained in 80% (4/5) of the cases (choroid plexus tumor, astrocytoma, meningioma, and chronic meningoencephalitis of unknown origin). In 1 patient, the results of biopsy were nondiagnostic; postmortem diagnosis was consistent with a low-grade oligodendroglioma. All the patients were discharged within 24 hours after the procedure without complications. This novel stereotactic system allows the surgeon to perform safe, easy-to-use, inexpensive, and minimally invasive precise brain biopsies in dogs and cats, without complications. CLINICAL RELEVANCE: This unique technique could be applied to any size and type of skull and for any type of brain lesions and would provide diagnostic information that would be valuable for future treatment planning and prognosis.

Dimensional Accuracy of Two-Step Impressions Relined with Extra-Light Addition Silicone Material.

Objectives: Some small defects may remain in the impression after making a two-step putty-light body impression. The aim of this study was to evaluate and compare the dimensional accuracy of 2-step and relined 2-step (3-step) putty-light body impressions. Materials and Methods: In this in vitro study, 30 impressions were made with putty, light body, and extra-light body addition silicone materials using the 2-step and 3-step impression techniques (N=15). An epoxy resin master model was made duplicating a maxillary typodont with left first premolar and first molar teeth prepared with a shoulder finish line and truncated pyramidal-shaped indices in the mid-palate and third molar sites. In addition to creating a reference digital model by scanning the master model, 30 master casts were scanned to produce digital models. The anteroposterior (AP) and cross-sectional (CS) dimensional accuracy of the models were compared with the master model using linear measurements. Moreover, tooth size measurements were made and compared using the root mean square (RMS). Two-sample t-test was applied to analyze the data (α=0.05). Results: The mean AP and RMS differences between the two study groups were not significant (P>0.05). However, the CS difference between the two groups was significant (P<0.001), and the 3-step impression technique showed smaller discrepancies in comparison to the master model. Conclusion: There was no significant difference in accuracy of the two techniques for single-unit and multiple-unit preparations. The 3-step impression technique had a higher CS dimensional accuracy.

Prosthodontic Rehabilitation of the Flabby Edentulous Maxilla Using Hobkirk's Technique: A Case Report.

Edentulism is characterized by the loss of teeth, which can significantly impact oral health and the quality of life of older patients. Among the challenges faced by individuals with edentulism is the occurrence of flabby ridges, a common consequence of prolonged tooth loss. Flabby ridges, characterized by soft, compressible tissue in the edentulous ridge area, present unique management challenges for dental professionals. Fibrous or flabby alveolar ridges present challenges in the fabrication of predictable prostheses. Impression making, a critical step in prosthodontic treatment, becomes particularly problematic as forces exerted during the process can distort the mobile denture-bearing tissues, which will cause the denture to become unstable and loose. This case report aims at an impression technique that can enhance the treatment outcomes for edentulous patients with fibrous alveolar ridges as this decreases the pressure over flabby tissue.

In vitro evaluation of the impact of intraoral scanner, scanning aids, and the scanned arch on the scan accuracy of edentulous arches.

PURPOSE: To assess the accuracy of complete maxillary and mandibular edentulous arch scans obtained using two different intraoral scanners (IOSs), with and without scanning aids, and to compare these results to those obtained using conventional impression methods. MATERIALS AND METHODS: Two IOSs were used (TRIOS 4 [TRI] and Emerald S [EMR]) to scan maxillary and mandibular typodonts. The typodonts were scanned without scanning aids [TRI_WSA and EMR_WSA groups] (n = 10). The typodonts were then scanned under four scanning aid conditions (n = 10): composite markers [TRI_MRK and EMR_MRK groups], scanning spray [TRI_SPR and EMR_SPR groups], pressure indicating paste [TRI_PIP and EMR_PIP groups], and liquid-type scanning aid [TRI_LQD and EMR_LQD groups]. Conventional impressions of both arches were also made using irreversible hydrocolloids in stock trays [IHC] and using polyvinyl siloxane (PVS) impression material in custom trays (n = 10) which were digitized using a laboratory scanner. Using a metrology software program, all scans were compared to a reference scan in order to assess trueness and to each other to assess precision. Trueness and precision were expressed as the root mean square (RMS) of the absolute deviation values and the statistical analysis was modeled on a logarithmic scale using fixed-effects models to meet model assumptions (α = 0.05). RESULTS: The main effect of arch (p = 0.004), scanner (p < 0.001), scanning aid (p = 0.041), and the interaction between scanner and scanning aid (p = 0.027) had a significant effect on mean RMS values of trueness. The arch (p = 0.015) and scanner (p < 0.001) had a significant effect on the mean RMS values of precision. The maxillary arch had better accuracy compared to the mandible. The TRIOS 4 scanner had better accuracy than both the Emerald S scanner and conventional impressions. The Emerald S had better precision than conventional impressions. The scanning spray and liquid-type scanning aids produced the best trueness with the TRIOS 4 scanner, while the liquid-type scanning aid and composite markers produced the best trueness for the Emerald S scanner. CONCLUSION: The scanned arch and the type of scanner had a significant effect on the accuracy of digital scans of completely edentulous arches. The scanning aid had a significant effect on the trueness of digital scans of completely edentulous arches which varied depending on the scanner used.

Machine learning judged neutral facial expressions as key factors for a "good therapist" within the first five minutes: An experiment to simulate online video counselling.

Objective: Machine learning models were employed to discern patients' impressions from the therapists' facial expressions during a virtual online video counselling session. Methods: Eight therapists simulated an online video counselling session for the same patient. The facial emotions of the therapists were extracted from the session videos; we then utilized a random forest model to determine the therapist's impression as perceived by the patients. Results: The therapists' neutral facial expressions were important controlling factors for patients' impressions. A predictive model with three neutral facial features achieved an accuracy of 83% in identifying patients' impressions. Conclusions: Neutral facial expressions may contribute to patient impressions in an online video counselling environment with spatiotemporal disconnection. Innovation: Expression recognition techniques were applied innovatively to an online counselling setting where therapists' expressions are limited. Our findings have the potential to enhance psychiatric clinical practice using Information and Communication Technology.

Evaluation of the accuracy of conventional and digital implant impression techniques in bilateral distal extension cases: a randomized clinical trial.

BACKGROUND: This clinical study aims to evaluate the accuracy of the conventional implant impression techniques compared to the digital impression ones in bilateral distal extension cases. METHODS: A total of 32 implants were placed in eight patients missing all mandibular posterior teeth except the first premolars. Each patient received a total of four implants, with two implants placed on each side, in order to provide support for three units of screw-retained zirconia restorations. Following osteointegration, the same patient underwent two implant-level impression techniques: Conventional open-tray impressions CII (splinted pick-up) and digital implant impressions DII with TRIOS 3 Shape intraoral scanner. The accuracy of impressions was evaluated utilizing a three-dimensional superimposition analysis of standard tessellation language (STL) files. Subsequently, the scan bodies were segmented using Gom inspect software to measure three-dimensional deviations in a color-coding map. Data were statistically analyzed using the Kruskal Wallis test and then a post-hoc test to determine the significance level (P < 0.05). RESULTS: The study revealed that higher angular and positional deviations were shown toward distal scan bodies compared to mesial ones for both impression techniques. However, this difference was not statistically significant (P > 0.05). CONCLUSION: Splinted open-tray conventional impression and intraoral scanning implant impression techniques have demonstrated comparable accuracy. TRIAL REGISTRATION: Clinical Trials.gov Registration ID NCT05912725. Registered 22/06/ 2023- Retrospectively registered, https://register. CLINICALTRIALS: gov .

The motivations and reputational consequences of spreading conspiracy theories.

Some people deliberately spread conspiracy theories. What are the reputational benefits and costs of doing so? The Adaptive-Conspiracism hypothesis proposes that it pays to be vigilant against possible conspiracies, especially in case of intergroup threat. Those who spread conspiracy theories may therefore be seen as valuable group members. Few studies have focused on the reputational impact of spreading a conspiracy theory. We conducted five studies (NPilot = 303; NStudy1 = 388; NStudy2 = 560; NStudy3 = 391; NStudy4 = 373) where participants rated a conspiracy spreader (vs. a neutral person) on a range of personality traits in different intergroup contexts. The results indicated that conspiracy spreaders were consistently perceived as more dominant and less warm than people making non-conspiratorial claims about certain events. Moreover, intergroup conflict attenuated the negative effects of spreading conspiracy theories on competence and warmth. These findings support the notion that besides drawbacks, spreading conspiracy theories can have benefits for the spreader's reputation, particularly during an intergroup conflict.

Impact of politeness and performance quality of android robots on future interaction decisions: a conversational design perspective.

Despite robots being applied in various situations of modern society, some people avoid them or do not feel comfortable interacting with them. Designs that allow robots to interact appropriately with people will make a positive impression on them resulting in a better evaluation of robots, which will solve this problem. To establish such a design, this study conducted two scenario-based experiments focusing on the politeness of the robot's conversation and behavior, and examined the impressions caused when the robot succeeds or slightly fails at a task. These two experiments revealed that regardless of whether the partner is a robot or a human, politeness not only affected the impression of interaction but also the expectations for better task results on the next occasion. Although the effect of politeness on preference toward robot agents was smaller than those toward human agents when agents failed a task, people were more likely to interact with polite robots and human agents again because they thought that they would not fail the next time. This study revealed that politeness motivates people to interact with robots repeatedly even if they make minor mistakes, suggesting that the politeness design is important for encouraging human-robot interaction.

Influence of Repeated Cut-off and Rescanning on the Trueness of the Intraoral Digital Scans.

OBJECTIVES: To evaluate the effects of repeated cut-off and rescan procedures on the trueness of three intraoral scanners (IOS). METHODS: A tooth model (#16) with a standard class II cavity was prepared, and the complete-arch was scanned using a laboratory scanner (D2000, 3Shape A/S) to obtain a reference scan. Then the typodont was scanned with three IOSs (3Shape TRIOS 3, CEREC Omnicam, and Medit i500) under two rescanning strategies (full-cut and partial-cut), with varying numbers of repeated cut-off and rescanning procedures (0, 1, 3, 5, 7, or 10). The trueness discrepancy between the reference and experimental digital scan was estimated using root mean square (RMS) calculations. Three regions of interest were selected to represent the rescanning, identification, and non-rescan area. And the discrepancies were analyzed using a linear mixed model (α=.05). RESULTS: Cut-off and rescanning procedures significantly decreased the trueness of digital scans in all test conditions compared to the reference. However, no progressive increase in discrepancy was observed under any rescan conditions. Significant influences on trueness were found based on the IOS used, with the 3Shape system exhibiting lower RMS values. The partial-cut strategy showed lower RMS values compared to the full-cut strategy, albeit without statistical significance. CONCLUSIONS: While repeated cut-off and rescanning procedures led to a decline in the quality of digital impressions, they did not result in discrepancy accumulation with repeated rescanning. CLINICAL SIGNIFICANCE: To ensure high scanning accuracy in dental practice, it is advisable to minimize the rescanning area when correcting imperfections in digital scans. Additionally, selecting an appropriate scanner can help mitigate the negative effects of the rescanning technique.

Trueness of Extraoral Digital Impressions for Full-Arch Implant Impressions-In Vitro Study.

Direct scanning of silicone impressions is a valid technique. However, studies in implant-supported rehabilitations are lacking. This in vitro study aims to compare the trueness of impressions obtained with two types of silicone and their corresponding stone casts, using two laboratory scanners in a full-arch implant rehabilitation. A master cast with six dental implants was scanned with a 12-megapixel scanner to obtain a digital master cast. Ten implant impressions were made using two silicones (Zhermack and Coltene) with the open-tray technique. The impressions and stone casts were scanned by two extraoral scanners (Identica T500, Medit; and S600 ARTI, Zirkonzhan). Trueness was assessed by comparing linear and angular distances in digital casts with the master cast. A p < 0.05 significance level was considered. The results showed that for the linear measurements, 72% were higher than the master cast measurements, and no consistent pattern was observed in the angular measurements. The greatest deviations were detected between the most posterior implants, with mean values ranging between 173 and 314 µm. No significant differences were found between scanners. However, differences were observed in the distances between silicones (46.7%) and between impressions and stone casts (73.3%). This work demonstrates that the direct scanning of silicone impressions yields results comparable to those obtained from scanning gypsum casts in full-arch implant-supported rehabilitation.

Research progress on accuracy of intraoral digital impressions for implant-supported full-arch prostheses. / æ— ç‰™é¢Œç§æ¤ä¿®å¤å£å† æ•°å­—åŒ–å°æ¨¡å‡†ç¡®æ€§ç ”ç©¶è¿›å±•.

With the rapid development of implant techniques and digital technology, digital impressions have become a commonly used impression method in implant restoration. At present, the accuracy of intraoral digital impressions directly applied to implant-supported full-arch prostheses remains inadequate, which is due to the high accuracy requirement of full-arch implant impressions, while there are still technical challenges in intraoral digital impressions about recognition and stitching. In this regard, scholars have proposed a variety of scanning strategies to improve the accuracy of intraoral scan, including mucosal modifications, auxiliary devices and novel scan bodies. At the same time photogrammetry, as a new digital impression technique, has been developing steadily and exhibits promising accuracy. This article reviews the research progress on the accuracy of edentulous full-arch implant impressions and techniques which can improve the accuracy of intraoral digital impressions, to provide reference for clinical application.

Evaluation of the accuracy of full-arch impressions between three different intraoral scanners and conventional impressions: A prospective in vivo study.

Background: This in-vivo study evaluated the accuracy of full-arch digital impressions obtained through different intraoral scanning technologies regarding trueness and efficiency against the standard alginate impressions. Methods: Alginate impressions were taken from 50 subjects, and the resulting stone casts were scanned using the Trios 3Shape desktop scanner. In-vivo scans were conducted on each participant using three intraoral scanners: Medit, CEREC Primescan, and 3Shape Trios. The scanned files were superimposed onto two software platforms: the 3Shape Orthoanalyser and Geomagic software. This superimposition was performed against the reference model to calculate 3D and 2D deviations, enabling efficiency comparisons between digital and traditional workflows based on work time in minutes. Measurements and comparisons were made in three planes: transverse, sagittal, and vertical dimensions for all the models and stone casts. Statistical analysis employed SPSS 23, with the significance level set at P<0.05. Results: Significant deviations were observed between the three intraoral scanners and the alginate impression, with molar and premolar areas showing greater imprecision across dental arches. Compared to the alginate technique, Medit i500 tended to reduce the transverse dimension in the areas mentioned above, while CEREC exhibited higher precision. Molar and premolar areas emerged as the regions with the greatest discrepancies, both in excess and deficiency, compared to the alginate impression. This difference in dimensions was, however, statistically insignificant overall. 3Shape Trios exhibited the shortest scan times, indicating higher efficiency. Among the intraoral scanners, Medit recorded the longest scanning duration. Conclusion: Accepting the null hypothesis, the scans obtained using all three scanners were comparable with statistically insignificant differences in the measurements. The three scanners differed in the total scan time taken, with the Medit scanner requiring the longest scan time and the 3Shape TRIOS 3 scanner demonstrating the shortest scan duration.

The effect of bioelectric and manual impressions on quality of complete dentures and quality of life: A cross over pilot study.

Purpose: To compare the quality of complete dentures and quality of life of participants rehabilitated by using TENS (Transcutaneous electric nerve stimulation) facilitated impression making with manual impressions. Material and methods: Ten completely edentulous participants were enrolled in the crossover, pilot study. Participants were randomized in 2 groups. Five participants in each group were rehabilitated by dentures fabricated with TENS facilitated definitive impression technique (group T) and conventional impression technique (group C). In group T, Bioelectric border molding was done for the participants, that uses electric stimulation of the nerves supplying the muscles. In group C, incremental border molding using modeling plastic impression compound was carried out. Participants in each group used the dentures for 3 months. After 3 months, OHIP-EDENT questionnaire responses were obtained from the participants to observe the oral health related quality of life. A dental specialist recorded denture quality by Kapur scoring criteria. After one month wash period, the treatment was swapped between the groups. OHIP-EDENT scores and Kapur score were recorded for the alternate dentures after 3 months of use. Descriptive analysis was followed by Mann Whitney test to compare the overall scores between group T and group C for OHIP-EDENT, the scores for individual domains of OHIP-EDENT, and Kapur score for denture evaluation (α = 0.05). Results: The overall OHIP-EDENT scores within each domain were less in group T when compared with the scores in group C and Kapur score for group T was more than group C. The difference was statistically significant i.e. P = 0.002 & 0.003 respectively. Conclusions: Less OHIP-EDENT scores in group T imply better perception of quality of life of individuals due to better performance of stomatognathic system. The higher Kapur scores in group T signifies better quality of dentures when TENS was used for definitive impression making.

No evidence for an other-race effect in dominance and trustworthy judgements from faces.

A variety of evidence shows that social categorization of people based on their race can lead to stereotypical judgements and prejudicial behaviour. Here, we explore the extent to which trait judgements of faces are influenced by race. To address this issue, we measured the reliability of first impressions for own-race and other-race faces in Asian and White participants. Participants viewed pairs of faces and were asked to indicate which of the two faces was more dominant or which of the two faces was more trustworthy. We measured the consistency (or reliability) of these judgements across participants for own-race and other-races faces. We found that judgements of dominance or trustworthiness showed similar levels of reliability for own-race and other-race faces. Moreover, an item analysis showed that the judgements on individual trials were very similar across participants from different races. Next, participants made overall ratings of dominance and trustworthiness from own-race and other-race faces. Again, we found that there was no evidence for an ORE. Together, these results provide a new approach to measuring trait judgements of faces and show that in these conditions there is no ORE for the perception of dominance and trustworthiness.

Accuracy of digital and conventional implant-level impression techniques for maxillary full-arch screw-retained prosthesis: A crossover randomized trial.

OBJECTIVES: This study aimed to compare the accuracy of implant-level conventional and digital impressions for atrophied maxillary ridges. MATERIALS AND METHODS: Twelve participants with atrophied edentulous maxillary ridges received six implants. Six months later and after soft tissue maturation around healing abutments, a control cast was constructed using the final passive restoration for each patient. Two types of implant-level impression techniques were carried out for each patient: (1) conventional (splinted open-tray) impression technique and (2) digital impression technique. For both techniques, scan bodies were labeled from the most distal implant on the left side (A, B, C, D, E, and F) and scanning was made. Accuracy of both techniques was measured using in vitro (two-dimensional and three-dimensional) and in vivo (clinical) methods. Two-dimensional methods include measurement of the difference in linear distances AB, AC AD, AE, and AF. Geomagic software was used to assess the three-dimensional deviation between the two impression techniques using the superimposition of standard tessellation language files. The incidence and percentage of nonpassive frameworks and framework misfits of final restorations for both types of impression techniques were assessed using the single screw test. RESULTS: For all distances, digital impressions recorded significantly higher deviation from control measurements than conventional impressions. The highest two-dimensional linear deviation was noted for AF distance and the lowest difference was noted for AB distance. For all scan bodies, digital impressions recorded significantly higher three-dimensional deviation than conventional impressions. The highest three-dimensional deviation was noted with scan bodies C and D. Digital impressions recorded a significantly higher incidence of nonpassive frameworks and framework misfits than digital impressions. CONCLUSION: Within the limitations of this study, it could be concluded that the conventional implant-level impression technique showed greater in vitro and in vivo accuracy than the digital impression technique when used for full-arch maxillary fixed restorations on inclined implants.

Basilar Impression: A Systematic Review and Meta-Analysis of Clinical Features, Operative Strategies, and Outcomes.

OBJECTIVE: Basilar impression (BI) is a rare yet debilitating abnormality of the craniovertebral junction, known to cause life-threatening medullary brainstem compression. Our study analyzes surgical approaches for BI and related outcomes. METHODS: A systematic review was conducted using PubMed, Google Scholar, and Web of Science electronic databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines to critically assess primary articles examining BI. RESULTS: We analyzed 87 patients from 65 articles, mostly female (55.17%) with a mean age of 46.31 ± 17.94 years, commonly presenting with motor (59.77%) and sensory deficits (55.17%). Commonly employed procedures included posterior occipitocervical fusion (24.14%), anterior decompression (20.69%), and combined anterior decompression with posterior fusion (21.84%). Patients who underwent anterior approaches were found to be older (55.38 ± 17.67 vs. 45.49 ± 18.78 years, P < 0.05) and had a longer duration from symptom onset to surgery (57.39 ± 64.33 vs. 26.02 ± 29.60 months, P < 0.05) compared to posterior approaches. Our analysis revealed a significant association between a longer duration from symptom onset to surgery and an increased likelihood of undergoing odontoidectomy and decompression (odds ratio: 1.02, 95% confidence interval: 1.00-1.03, P < 0.05). Furthermore, after adjusting for all other covariates, a history of rheumatoid arthritis and the use of a posterior approach were significantly associated with an elevated risk of postoperative complications (P < 0.05). CONCLUSIONS: The treatment approach to complex craniovertebral junction disease should be tailored to the surgeon's experience and the nature of the compressive pathology.

Effect of different impression coping and scan body designs on the accuracy of conventional versus digital implant impressions: An in vitro study.

OBJECTIVES: This in vitro study compared the accuracy of conventional versus digital impression techniques for angulated and straight implants using two different impression coping and scan body designs. METHODS: Two implant systems were used: Straumann and Dentegris. Two implants were placed for each system, straight and angulated at 15 degrees mesiodistally. Conventional impressions were made using the splinted open-tray technique using narrow impression coping (NIC) and wide impression coping (WIC). The stone casts produced from the conventional impression were digitized with a lab scanner (3Shape D2000). Digital impressions were made using four intraoral scanners (IOS): 3Shape Trios 3, Medit i700, Cerec Omnicam, and Emerald Planmeca using short scanbodies (SSB) and long scanbodies (LSB). The scanning was repeated ten times to generate the Standard Tessellation Language (STL) files. The distance and angle deviations between impression copings and scanbodies were measured in reference to the master model. RESULTS: The trueness and precision of SSB and WIC were significantly better than LSB and NIC (p<0.001). The range trueness of the platform deviation was better with SSB (37.1 to 51.9) than LSB (89.6 to 127.9 µm) and for WIC than NIC in conventional impressions (58.2 and 75.1 µm, respectively). The trueness of the angle deviation of digital scans with SSB (0.11 to 0.25 degrees) was significantly better than scans with LSB (0.31 to 0.57 degrees) and for WIC than NIC (0.21 and 0.52 degrees, respectively). The precision of the platform deviation of digital scans with SSB (12.4 to 34.5 µm) was higher than other scans and conventional impressions (42.9 to 71.4 µm). The precision of the angle deviation of Medit i700 and Trios 3 with SSB (0.17 and 0.20 degrees, respectively) was higher than other scans with SSB and conventional impressions (0.54 to 1.63 degrees). CONCLUSIONS: Digital scans with SSB were more accurate than conventional splinted open-tray impressions. The type of impression coping and scanbody significantly affected the impression accuracy. CLINICAL SIGNIFICANCE: The use of a short scanbody can increase the accuracy of digital impressions, and wide impression coping can increase the accuracy of conventional impressions, resulting in improved clinical outcomes.

Evaluation of the Stability of Open-Tray Impression Coping Using Two Different Impression Materials at Three Different Subgingival Implant Placement Depths.

Objective To evaluate and compare the stability of the open tray impression coping within the set impression while attaching the lab analog when polyether (PE) heavy body and polyvinyl siloxane (PVS) putty impression materials were used and the implant platform was placed sub-gingivally at three different depths. Methods Two impression materials, PE and PVS, and custom-made plexiglass models with embedded single implants to simulate implant positioning depths of 0 mm, 2 mm, and 4 mm, sub-gingivally, were used in the study. Open tray impressions were made after attaching impression coping to the implant embedded in the model. Implant lab analog was attached to the impression coping in the set impression, and its stability was measured using a universal testing machine. Forty-two open tray impressions were made in six groups, with seven impressions in each group. Descriptive statistics such as mean and standard deviation were calculated. A comparison of the mean stability between the two impression materials at each depth was done using an independent t-test. Comparison of the mean stability between the three different subgingival implant depths in each material was done by one-way ANOVA with the Scheffe multiple comparison test (post-hoc analysis). The level of significance was set at p<0.05. Results The stability of the impression coping was measured as the force in Newtons required for the displacement of the analog attached to the impression coping embedded in the set impression. PE with the embedded impression coping at a depth of 0 mm gave the highest mean stability value (4.37+/-0.41), and the least mean stability was offered by PVS with the embedded impression coping at 4 mm depth (1.88+/-0.37). When an independent t-test was done to compare the mean stability values of PE and PVS, there was a statistically significant difference at 0 mm, 2 mm, and 4 mm. On doing one-way ANOVA to compare the mean stability between the different depth groups, there was a statistically significant difference between the three depth groups in PE and PVS. Scheffe multiple comparison tests (post-hoc analysis) revealed a statistically significant difference between 0 mm, 2 mm, and 4 mm subgingival depths of the impression coping placement in both PE and PVS. Conclusion The accuracy of the master cast is an important determinant for the precise fit and long life of the final prosthesis. In the case of maxillary anterior implant placements where deep subgingival placement of the implant platform is needed for aesthetic and functional reasons, the impression material should be selected carefully to ensure the stability of the impression coping. Among the materials included in the present study, the PE impression material offered the maximum stability for impression coping compared to PVS.

Comparison of Intraoral Scanning Modes in Three Distinct Full- Arch Digital Implant Impression Scenarios: An In Vitro Study.

PURPOSE: The purpose of this study was to analyze the effect of scanning modes on the accuracy of the Trios for full-arch digital implant impressions. MATERIALS AND METHODS: The trueness and precision of the intraoral scanning mode (IOSM) and the intraoral edentulous scanning mode (IOEM) of the Trios were evaluated in three edentulous models, each featuring 4, 6, and 8 implant analogues. Reference scanning data were obtained by scanning each model with a desktop scanner. Each model was scanned 10 times using the IOSM and IOEM modes of the Trios to establish the test groups. The scan bodies in the test and reference scans were isolated and exported in the reverse engineering program. The scan bodies in each group were superimposed with the corresponding reference scan (trueness) or with each other (precision). The overall 3D deviation between the aligned scan bodies was computed by the root-meansquare (RMS) values. RESULTS: As a result of the trueness and precision evaluation, no significant difference was found between scanning modes in any of the models. When comparing models, the 8-implant model showed significantly lower trueness than the 4-implant model. However, it also exhibited significantly higher precision when compared to both the 4-implant and 6-implant models. There were no significant differences in other pairwise comparisons between the models. CONCLUSION: Trueness and precision values were similar between the IOSM and IOEM groups across all the models. An increase in the number of implants in complete edentulous arches may have a negative impact on digital impression accuracy.