Genotoxicity of Formaldehyde: Effect of Whole-Body Exposure on Polychromatic Erythrocyte/Normochromatic Erythrocyte Ratio in Male and Female Rats.

Every day, millions of individuals are exposed to formaldehyde (FA) due to its extensive presence and versatile use. Many in vivoand in vitroexperiments revealed that the mechanism of genotoxicity induced by FA exposure is complex yet toxicity upon whole-body exposure (WBE) to FA is less. As teachers, students, and skilled assistants in the health care sectors are also extensively exposed to FA vapors, it might result in genotoxicity. However, the effects of subchronic exposure to FA at low concentrations are not clear. Hence, analysis of the micronucleus (MN) was necessary to study the genetic toxicity triggered by FA in the bone marrow of male and female experimental rats. The present study is a gender- and duration of exposure-based assessment of the geno- and cytotoxicity in bone marrow cells of Wistar rats to study the effect of WBE to 10% FA on polychromatic erythrocytes/normochromatic erythrocytes (PCE/NCE) ratio and micronucleated polychromatic erythrocytes (MnPCE) in experimental rats. The obtained result clearly showed that WBE to FA for 60 days at concentrations between 1 and 1.1 ppm (0, 1, and 1.5 h) induced genotoxic effects in both male and female rats by altering the MnPCE% and significantly increasing the ratio of PCE/NCE (1.07 ± 0.23, 1.20 ± 0.20, 1.22 ± 0.14). The PCE/NCE ratio in male rats was lesser (0.98, 1.12, and 1.18) when compared with female rats (1.17, 1.29, and 1.26) with 0, 1, and 1.5 h exposure, respectively. Thus, the genetic/cellular sensitivity to FA differs among the sexes and also depends on the exposure duration.

Metabolite analysis of 14C-labeled chloromethylisothiazolinone/methylisothiazolinone for toxicological consideration of inhaled isothiazolinone biocides in lungs.

5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT) used as preservatives in various products, including humidifier disinfectants, presents substantial health hazards. This research delves into the toxicological assessments of CMIT/MIT in the respiratory system using animal models. Through the synthesis of radiolabeled [14C]CMIT and [14C]MIT, we investigated the biological uptake and in vivo behaviors of CMIT/MIT in the respiratory tissues following intratracheal exposure. Quantitative whole-body autoradiography (QWBA) revealed significant persistence of CMIT/MIT in lung tissue. In addition, radio high-performance liquid chromatography (radio-HPLC) with tandem mass spectrometry (LC-MS/MS) was employed for metabolite profiling and identification. Notably, around 28% of the radiolabel was retained in tissue after the extraction step, suggesting covalent binding of CMIT/MIT and their metabolites with pulmonary biomolecules. This observation demonstrates the propensity of the electrophilic isothiazolinone ring in CMIT/MIT to undergo chemical interactions with biothiols in proteins and enzymes, fostering irreversible alterations of biomolecules. Such accumulations of transformations could result in direct toxicity at both cellular and organ levels. Additionally, the detection of metabolites, including a MIT dimer conjugated with glutathione (GSH), as analyzed by mass spectrometry indicates the possible reduction of cellular GSH levels and subsequent oxidative stress. This investigation offers an in-depth insight into the toxic mechanisms of CMIT/MIT, underlying their capability to engage in complex formations with biomacromolecules and induce pronounced respiratory toxicity. These results highlight the imperative for stringent safety assessments of these chemicals, advocating for improved public health and safety measures in the use of chemicals.

Differences in the anatomy and physiology of the human and rat respiratory tracts and impact on toxicological assessments.

Inhalation is a critical route through which substances can exert adverse effects in humans; therefore, it is important to characterize the potential effects that inhaled substances may have on the human respiratory tract by using fit for purpose, reliable, and human relevant testing tools. In regulatory toxicology testing, rats have primarily been used to assess the effects of inhaled substances as they-being mammals-share similarities in structure and function of the respiratory tract with humans. However, questions about inter-species differences impacting the predictability of human effects have surfaced. Disparities in macroscopic anatomy, microscopic anatomy, or physiology, such as breathing mode (e.g., nose-only versus oronasal breathing), airway structure (e.g., complexity of the nasal turbinates), cell types and location within the respiratory tract, and local metabolism may impact inhalation toxicity testing results. This review shows that these key differences describe uncertainty in the use of rat data to predict human effects and supports an opportunity to harness modern toxicology tools and a detailed understanding of the human respiratory tract to develop testing approaches grounded in human biology. Ultimately, as the regulatory purpose is protecting human health, there is a need for testing approaches based on human biology and mechanisms of toxicity.

A review of the toxicity of ingredients in e-cigarettes, including those ingredients having the FDA's "Generally Recognized as Safe (GRAS)" regulatory status for use in food.

INTRODUCTION: Some firms and marketers of electronic cigarettes (e-cigarettes; a type of electronic nicotine delivery system (ENDS)) and refill liquids (e-liquids) have made claims about the safety of ingredients used in their products based on the term "GRAS or Generally Recognized As Safe" (GRAS). However, GRAS is a provision within the definition of a food additive under section 201(s) (21 U.S.C. 321(s)) of the U.S. Federal Food Drug and Cosmetic Act (FD&C Act). Food additives and GRAS substances are by the FD&C Act definition intended for use in food, thus safety is based on oral consumption; the term GRAS cannot serve as an indicator of the toxicity of e-cigarette ingredients when aerosolized and inhaled (i.e., vaped). There is no legal or scientific support for labeling e-cigarette product ingredients as "GRAS". This review discusses our concerns with the GRAS provision being applied to e-cigarette products and provides examples of chemical compounds that have been used as food ingredients but have been shown to lead to adverse health effects when inhaled. The review provides scientific insight into the toxicological evaluation of e-liquid ingredients and their aerosols to help determine the potential respiratory risks associated with their use in e-cigarettes. IMPLICATIONS: The rise in prevalence of e-cigarette use and emerging evidence of adverse effects, particularly on lung health, warrant assessing all aspects of e-cigarette toxicity. One development is manufacturers' stated or implied claims of the safety of using e-cigarette products containing ingredients determined to be "Generally Recognized As Safe" (GRAS) for use in food. Such claims, typically placed on e-cigarette product labels and used in marketing, are unfounded, as pointed out by the United States Food and Drug Administration (FDA)1 and the Flavor and Extract Manufacturers Association (FEMA)2. Assessment of inhalation health risks of all ingredients used in e-liquids, including those claimed to be GRAS, is warranted.

A novel in vitro high-content imaging assay for the prediction of drug-induced lung toxicity.

The development of inhaled drugs for respiratory diseases is frequently impacted by lung pathology in non-clinical safety studies. To enable design of novel candidate drugs with the right safety profile, predictive in vitro lung toxicity assays are required that can be applied during drug discovery for early hazard identification and mitigation. Here, we describe a novel high-content imaging-based screening assay that allows for quantification of the tight junction protein occludin in A549 cells, as a model for lung epithelial barrier integrity. We assessed a set of compounds with a known lung safety profile, defined by clinical safety or non-clinical in vivo toxicology data, and were able to correctly identify 9 of 10 compounds with a respiratory safety risk and 9 of 9 compounds without a respiratory safety risk (90% sensitivity, 100% specificity). The assay was sensitive at relevant compound concentrations to influence medicinal chemistry optimization programs and, with an accessible cell model in a 96-well plate format, short protocol and application of automated imaging analysis algorithms, this assay can be readily integrated in routine discovery safety screening to identify and mitigate respiratory toxicity early during drug discovery. Interestingly, when we applied physiologically-based pharmacokinetic (PBPK) modelling to predict epithelial lining fluid exposures of the respiratory tract after inhalation, we found a robust correlation between in vitro occludin assay data and lung pathology in vivo, suggesting the assay can inform translational risk assessment for inhaled small molecules.

Toxicological inhalation studies in rats to substantiate grouping of zinc oxide nanoforms.

BACKGROUND: Significant variations exist in the forms of ZnO, making it impossible to test all forms in in vivo inhalation studies. Hence, grouping and read-across is a common approach under REACH to evaluate the toxicological profile of familiar substances. The objective of this paper is to investigate the potential role of dissolution, size, or coating in grouping ZnO (nano)forms for the purpose of hazard assessment. We performed a 90-day inhalation study (OECD test guideline no. (TG) 413) in rats combined with a reproduction/developmental (neuro)toxicity screening test (TG 421/424/426) with coated and uncoated ZnO nanoforms in comparison with microscale ZnO particles and soluble zinc sulfate. In addition, genotoxicity in the nasal cavity, lungs, liver, and bone marrow was examined via comet assay (TG 489) after 14-day inhalation exposure. RESULTS: ZnO nanoparticles caused local toxicity in the respiratory tract. Systemic effects that were not related to the local irritation were not observed. There was no indication of impaired fertility, developmental toxicity, or developmental neurotoxicity. No indication for genotoxicity of any of the test substances was observed. Local effects were similar across the different ZnO test substances and were reversible after the end of the exposure. CONCLUSION: With exception of local toxicity, this study could not confirm the occasional findings in some of the previous studies regarding the above-mentioned toxicological endpoints. The two representative ZnO nanoforms and the microscale particles showed similar local effects. The ZnO nanoforms most likely exhibit their effects by zinc ions as no particles could be detected after the end of the exposure, and exposure to rapidly soluble zinc sulfate had similar effects. Obviously, material differences between the ZnO particles do not substantially alter their toxicokinetics and toxicodynamics. The grouping of ZnO nanoforms into a set of similar nanoforms is justified by these observations.

Enhanced study design for acute inhalation studies with hydrophobic surface-treated particles to determine toxicological effects including suffocation.

High concentrations of low-density particles may cause effects in acute inhalation toxicity studies which can be easily underestimated or misinterpreted following strictly the OECD TG 436, i.e., limited parameters as mortality and gross lesions will be evaluated only. Seven particle types (synthetic amorphous silica (SAS) HMDZ-SAS, silica gel, pyrogenic SAS, and precipitated SAS, calcium carbonate, aluminum oxide pyrogenic alumina, organic red pigment) were chosen at the highest technically feasible concentration of approximately 500 mg/m3 for acute inhalation studies with an expanded endpoint setup. Therefore additional parameters and a thorough histopathological evaluation of an extensive set of organs, including the respiratory tract emphasizing the nasal cavities were added. Six Crl:WI rats per study were exposed for four hours from which three animals were sacrificed after 24 hours and three animals after 14 days. HMDZ-SAS caused early death in all animals due to blockage of the nasal passages caused by its hydrophobicity. For all other Si-containing compounds, histology revealed minor inflammatory and reactive lesions in lungs after 24 hours that were still present after 14 days, except in silica gel-treated animals. After 14 days, for pyrogenic SAS, precipitated SAS, and pyrogenic alumina, granulomas formed in the BALT and lung-associated lymph nodes. In contrast, the calcium carbonate induced almost no findings, and the red pigment (also tested for the additional dose of 1000 mg/m3) stuck partially to the nasal mucosa without causing pathological damage and partly entered the lungs without showing any adverse effects. The results of the present study highlight the advantage of improving the rather simple study design of acute inhalation studies by implementing an extended study design.

Particle aerosol generation and potential altering in airflow used for acute/repeated inhalation toxicity testing.

Reproducible aerosol generation in combination with stable aerosol properties are essential prerequisites for compliant performance of acute or repeated inhalation toxicity tests of particulate materials according to OECD TG 403, 436, 412, or 413. A frequent problem of powder aerosol generation is the formation of coarse agglomerates with low shear resistance, which are beyond the tolerable size range but not detected by the prescribed aerodynamic measurement techniques by cascade impactor as the measurement conditions cause a disintegration into smaller fragments. But such agglomerates are observed during the transport to the inhalation chambers. These effects particularly apply to high mass concentrations and low-density powders, i.e., pyrogenic oxides. This study describes the transport influence in the airflow on the change of powder aerosols and on their respirability. A simplified short tube set-up was developed for the aerosol transport pre-tests, which allows the determination of the optimal aerosol formation conditions for the inhalation tests. The particles were measured with low shear using laser diffraction measurement or optical particle counters. The calculation of the aerodynamic particle sizes prescribed in the guidelines requires knowledge of the effective particle density of the porous aerosol particles. A practicable method for determining these is presented and described. In the outlook, first low concentration measurements show that clear agglomeration effects can also occur at particle concentrations around 20 mg/m³.

A method for measuring the bioaccessibility of polycyclic aromatic hydrocarbons in cell culture media.

Airborne polycyclic aromatic hydrocarbons (PAHs) and their derivatives are of particular concern for population health due to their abundance and toxicity via inhalation. Lung toxicity testing includes exposing lung epithelial cell lines to PAHs in a culture medium containing inorganic species, lipids, proteins, and other biochemicals where the cell response is influenced among others by the toxic chemical accessibility in the medium. While inhalation bioaccessibility of PAHs and other toxicants was previously studied in surrogate lung fluids, studies measuring bioaccessibility in cell culture media are rare. In this work, a method was developed to characterize PAH bioaccessibility in a culture medium used for mouse lung epithelial (FE1) cells. Further, the optimised method was tested using commercially available standard reference material of urban particulate matter (PM) as well as polyurethane foam passive air samplers (PUF-PAS). The method provided a high precision and recovery of analytes, indicating no losses during sample processing and analysis. PAHs had non-linear concentration-responses, with the culture medium approaching saturation with PM concentration of 500 µg mL-1. The results showed that phenanthrene, a 3-ring PAH, was significantly more bioaccessible than ≥4-ring congeners in the culture medium (up to ∼2.5 folds; p < 0.05). Finally, using pre-deployed PUF-PAS from a residential and an industrial site, five PAHs were found in the culture medium, including naphthalene, phenanthrene, anthracene, fluoranthene, and pyrene. This work provides a proof of concept to enable future studies to assess the inhalation bioaccessibility of polycyclic aromatic compounds and other airborne pollutants collected using PUF-PAS.

Drosophila melanogaster as potential alternative animal model for evaluating acute inhalation toxicity.

Drosophila melanogaster (D. melanogaster) is a promising model biological system. It has a short life cycle and can provide a substantial number of specimens suitable for comprehensive genetic and molecular analyses in a short time. In this study, we investigated the acute inhalation toxicity of methylisothiazolinone (MIT) and chloromethylisothiazolinone (CMIT) in a D. melanogaster model. During exposure, environmental conditions, mass median aerodynamic and geometric standard diameters were measured. After inhalation exposure, the survival rate, climbing ability, and bang sensitivity were measured on days 1, 2, and 7. Notably, the survival rate of flies decreased in an exposure concentration-dependent manner. Climbing ability and bang sensitivity were also altered in the MIT/CMIT group, compared with the negative control group. Overall, these results provide a reliable D. melanogaster model system for inhalation toxicity study.

Conventional and multi-omics assessments of subacute inhalation toxicity due to propylene glycol and vegetable glycerin aerosol produced by electronic cigarettes.

Propylene glycol (PG) and vegetable glycerin (VG) are the most common solvents used in electronic cigarette liquids. No long-term inhalation toxicity assessments have been performed combining conventional and multi-omics approaches on the potential respiratory effects of the solvents in vivo. In this study, the systemic toxicity of aerosol generated from a ceramic heating coil-based e-cigarette was evaluated. First, the aerosol properties were characterized, including carbonyl emissions, the particle size distribution, and aerosol temperatures. To determine toxicological effects, rats were exposed, through their nose only, to filtered air or a propylene glycol (PG)/ glycerin (VG) (50:50, %W/W) aerosol mixture at the target concentration of 3 mg/L for six hours daily over a continuous 28-day period. Compared with the air group, female rats in the PG/VG group exhibited significantly lower body weights during both the exposure period and recovery period, and this was linked to a reduced food intake. Male rats in the PG/VG group also experienced a significant decline in body weight during the exposure period. Importantly, rats exposed to the PG/VG aerosol showed only minimal biological effects compared to those with only air exposure, with no signs of toxicity. Moreover, the transcriptomic, proteomic, and metabolomic analyses of the rat lung tissues following aerosol exposure revealed a series of candidate pathways linking aerosol inhalation to altered lung functions, especially the inflammatory response and disease. Dysregulated pathways of arachidonic acids, the neuroactive ligand-receptor interaction, and the hematopoietic cell lineage were revealed through integrated multi-omics analysis. Therefore, our integrated multi-omics approach offers novel systemic insights and early evidence of environmental-related health hazards associated with an e-cigarette aerosol using two carrier solvents in a rat model.

Increasing confidence in new approach methodologies for inhalation risk assessment with multiple end point assays using 5-day repeated exposure to 1,3-dichloropropene.

New Approach Methodologies (NAMs) are being widely used to reduce, refine, and replace, animal use in studying toxicology. For respiratory toxicology, this includes both in silico and in vitro alternatives to replace traditional in vivo inhalation studies. 1,3-Dichloropropene (1,3-DCP) is a volatile organic compound that is widely used in agriculture as a pre-planting fumigant. Short-term exposure of humans to 1,3-DCP can result in mucous membrane irritation, chest pain, headache, and dizziness. In our previous work, we exposed differentiated cells representing different parts of the respiratory epithelium to 1,3-DCP vapor, measured cytotoxicity, and did In Vitro to In Vivo Extrapolation (IVIVE). We have extended our previous study with 1,3-DCP vapors by conducting transcriptomics on acutely exposed nasal cultures and have implemented a separate 5-day repeated exposure with multiple endpoints to gain further molecular insight into our model. MucilAir™ Nasal cell culture models, representing the nasal epithelium, were exposed to six sub-cytotoxic concentrations of 1,3-DCP vapor at the air-liquid interface, and the nasal cultures were analyzed by different methodologies, including histology, transcriptomics, and glutathione (GSH) -depletion assays. We observed the dose-dependent effect of 1,3-DCP in terms of differential gene expression, change in cellular morphology from pseudostratified columnar epithelium to squamous epithelium, and depletion of GSH in MucilAir™ nasal cultures. The MucilAir™ nasal cultures were also exposed to 3 concentrations of 1,3-DCP using repeated exposure 4 h per day for 5 days and the histological analyses indicated changes in cellular morphology and a decrease in ciliated bodies and an increase in apoptotic bodies, with increasing concentrations of 1,3-DCP. Altogether, our results suggest that sub-cytotoxic exposures to 1,3-DCP lead to several molecular and cellular perturbations, providing significant insight into the mode-of-action (MoA) of 1,3-DCP using an innovative NAM model.

A review of pulmonary neutrophilia and insights into the key role of neutrophils in particle-induced pathogenesis in the lung from animal studies of lunar dusts and other poorly soluble dust particles.

The mechanisms of particle-induced pathogenesis in the lung remain poorly understood. Neutrophilic inflammation and oxidative stress in the lung are hallmarks of toxicity. Some investigators have postulated that oxidative stress from particle surface reactive oxygen species (psROS) on the dust produces the toxicopathology in the lungs of dust-exposed animals. This postulate was tested concurrently with the studies to elucidate the toxicity of lunar dust (LD), which is believed to contain psROS due to high-speed micrometeoroid bombardment that fractured and pulverized lunar surface regolith. Results from studies of rats intratracheally instilled (ITI) with three LDs (prepared from an Apollo-14 lunar regolith), which differed 14-fold in levels of psROS, and two toxicity reference dusts (TiO2 and quartz) indicated that psROS had no significant contribution to the dusts' toxicity in the lung. Reported here are results of further investigations by the LD toxicity study team on the toxicological role of oxidants in alveolar neutrophils that were harvested from rats in the 5-dust ITI study and from rats that were exposed to airborne LD for 4 weeks. The oxidants per neutrophils and all neutrophils increased with dose, exposure time and dust's cytotoxicity. The results suggest that alveolar neutrophils play a critical role in particle-induced injury and toxicity in the lung of dust-exposed animals. Based on these results, we propose an adverse outcome pathway (AOP) for particle-associated lung disease that centers on the crucial role of alveolar neutrophil-derived oxidant species. A critical review of the toxicology literature on particle exposure and lung disease further supports a neutrophil-centric mechanism in the pathogenesis of lung disease and may explain previously reported animal species differences in responses to poorly soluble particles. Key findings from the toxicology literature indicate that (1) after exposures to the same dust at the same amount, rats have more alveolar neutrophils than hamsters; hamsters clear more particles from their lungs, consequently contributing to fewer neutrophils and less severe lung lesions; (2) rats exposed to nano-sized TiO2 have more neutrophils and more severe lesions in their lungs than rats exposed to the same mass-concentration of micron-sized TiO2; nano-sized dust has a greater number of particles and a larger total particle-cell contact surface area than the same mass of micron-sized dust, which triggers more alveolar epithelial cells (AECs) to synthesize and release more cytokines that recruit a greater number of neutrophils leading to more severe lesions. Thus, we postulate that, during chronic dust exposure, particle-inflicted AECs persistently release cytokines, which recruit neutrophils and activate them to produce oxidants resulting in a prolonged continuous source of endogenous oxidative stress that leads to lung toxicity. This neutrophil-driven lung pathogenesis explains why dust exposure induces more severe lesions in rats than hamsters; why, on a mass-dose basis, nano-sized dusts are more toxic than the micron-sized dusts; why lung lesions progress with time; and why dose-response curves of particle toxicity exhibit a hockey stick like shape with a threshold. The neutrophil centric AOP for particle-induced lung disease has implications for risk assessment of human exposures to dust particles and environmental particulate matter.

Heterogeneous aggregation of carbon and silicon nanoparticles with benzo[a]pyrene modulates their impacts on the pulmonary surfactant film.

Inhaled nanoparticles (NPs) can deposit in alveoli where they interact with the pulmonary surfactant (PS) and potentially induce toxicity. Although nano-bio interactions are influenced by the physicochemical properties of NPs, isolated NPs used in previous studies cannot accurately represent those found in atmosphere. Here we used molecular dynamics simulations to investigate the interplay between two types of NPs associated with benzo[a]pyrene (BaP) at the PS film. Silicon NPs (SiNPs), regardless of aggregation and adsorption, directly penetrated through the PS film with minimal disturbance. Meanwhile, BaPs adsorbed on SiNPs were rapidly solubilized by PS, increasing the BaP's bioaccessibility in alveoli. Carbon NPs (CNPs) showed aggregation and adsorption-dependent effects on the PS film. Compared to isolated CNPs, which extracted PS to form biomolecular coronas, aggregated CNPs caused more pronounced PS disruption, especially around irregularly shaped edges. SiNPs in mixture exacerbated the PS perturbation by piercing PS film around the site of CNP interactions. BaPs adsorbed on CNPs were less solubilized and suppressed PS extraction, but aggravated biophysical inhibition by prompting film collapse under compression. These results suggest that for proper assessment of inhalation toxicity of airborne NPs, it is imperative to consider their heterogeneous aggregation and adsorption of pollutants under atmospheric conditions.

Profiling alveolar macrophage responses to inhaled compounds using in vitro high content image analysis.

One of the main hurdles in the development of new inhaled medicines is the frequent observation of foamy macrophage (FM) responses in non-clinical studies in experimental animals, which raises safety concerns and hinders progress into clinical trials. We have investigated the potential of a novel multi-parameter high content image analysis (HCIA) assay as an in vitro safety screening tool to predict drug induced FM. Rat (NR8383) and human U937-derived alveolar macrophages were exposed in vitro to a panel of model compounds with different biological activity, including inhaled bronchodilators, inhaled corticosteroids (ICS), phospholipidosis inducers and proapoptotic agents. An HCIA was utilized to produce drug-induced cell response profiles based on individual cell health, morphology and lipid content parameters. The profiles of both rat and human macrophage cell lines differentiated between cell responses to marketed inhaled drugs and compounds known to induce phospholipidosis and apoptosis. Hierarchical clustering of the aggregated data allowed identification of distinct cell profiles in response to exposure to phospholipidosis and apoptosis inducers. Additionally, in NR8383 cell responses formed two distinct clusters, associated with increased vacuolation with or without lipid accumulation. U937 cells presented a similar trend but appeared less sensitive to drug exposure and presented a narrower range of responses. These results indicate that our multi-parameter HCIA assay is suitable to generate characteristic drug-induced macrophage response profiles, thus enabling differentiation of foamy macrophage phenotypes associated with phospholipidosis and apoptosis. This approach shows great potential as pre-clinical in vitro screening tool for safety assessment of candidate inhaled medicines.

Evaluation of in vitro rat and human airway epithelial models for acute inhalation toxicity testing.

In vivo models (mostly rodents) are currently accepted by regulatory authorities for assessing acute inhalation toxicity. Considerable efforts have been made in recent years to evaluate in vitro human airway epithelial models (HAEM) as replacements for in vivo testing. In the current work, an organotypic in vitro rat airway epithelial model (RAEM), rat EpiAirway, was developed and characterized to allow a direct comparison with the available HAEM, human EpiAirway, in order to address potential interspecies variability in responses to harmful agents. The rat and human models were evaluated in 2 independent laboratories with 14 reference chemicals, selected to cover a broad range of chemical structures and reactive groups, as well as known acute animal and human toxicity responses, in 3 replicate rounds of experiments. Toxicity endpoints included changes in tissue viability (MTT assay), epithelial barrier integrity (TEER, transepithelial electrical resistance), and tissue morphology (histopathology). The newly developed rat EpiAirway model produced reproducible results across all replicate experiments in both testing laboratories. Furthermore, a high level of concordance was observed between the RAEM and HAEM toxicity responses (determined by IC25) in both laboratories, with R2=0.78 and 0.88 when analyzed by TEER; and R2=0.92 for both when analyzed by MTT. These results indicate that rat and human airway epithelial tissues respond similarly to acute exposures to chemicals. The new in vitro RAEM will help extrapolate to in vivo rat toxicity responses and support screening as part of a 3Rs program.

Toxicity and human health assessment of an alcohol-to-jet (ATJ) synthetic kerosene developed under an international agreement with Sweden.

Alcohol-to-jet (ATJ) Synthetic Kerosene with Aromatics (SKA) fuels are produced by dehydration and refining of alcohol feed stocks. ATJ SKA fuel known as SB-8 was developed by Swedish Biofuels as a cooperative agreement between Sweden and AFRL/RQTF. SB-8 including standard additives was tested in a 90-day toxicity study with male and female Fischer 344 rats exposed to 0, 200, 700, or 2000 mg/m3 fuel in an aerosol/vapor mixture for 6 hr/day, 5 days/week. Aerosols represented 0.04 and 0.84% average fuel concentration in 700 or 2000 mg/m3 exposure groups. Examination of vaginal cytology and sperm parameters found no marked changes in reproductive health. Neurobehavioral effects were increased rearing activity (motor activity) and significantly decreased grooming (functional observational battery) in 2000 mg/m3 female rats. Hematological changes were limited to elevated platelet counts in 2000 mg/m3 exposed males. Minimal focal alveolar epithelial hyperplasia with increased number of alveolar macrophages was noted in some 2000 mg/m3 males and one female rat. Additional rats tested for genotoxicity by micronucleus (MN) formation did not detect bone marrow cell toxicity or alterations in number of MN; SB-8 was not clastogenic. Inhalation results were similar to effects reported for JP-8. Both JP-8 and SB fuels were moderately irritating under occlusive wrapped conditions but slightly irritating under semi-occlusion. Exposure to SB-8, alone or as 50:50 blend with petroleum-derived JP-8, is not likely to enhance adverse human health risks in the military workplace.

The effects of 4-week inhalation exposure to titanium nitride on lungs of Sprague-Dawley rats.

Titanium nitride (TiN) is a ceramic material with physical properties such as extreme hardness, high decomposition temperature, defect structure, and gold-yellow color. TiN is generally considered non-toxic and safe; however, hazards have not been identified, especially in workers after inhalation exposure. Here, we conducted a four-week inhalation toxicity study of TiN using a nose-only inhalation exposure system in Sprague-Dawley rats. Rats were exposed to TiN for 4 weeks (6 h a day, 5 days per week) at target concentrations of 45, 90, and 180 mg/m3. Clinical signs, mean body weight changes, hematology, blood biochemistry, necropsy, organ weight, bronchoalveolar lavage fluid analysis, and histopathological findings were observed. Analytical concentrations of the low, middle, and high-concentration groups were 45.55 ± 3.18 mg/m3, 90.69 ± 7.30 mg/m3, and 183.87 ± 15.21 mg/m3, respectively. The mass median aerodynamic diameter (MMAD) for the low, middle, and high-concentration groups were 1.44 ± 0.07 µm, 1.47 ± 0.18 µm, and 1.68 ± 0.16 µm, and the geometric standard deviation (GSD) was 2.24 ± 0.03, 2.31 ± 0.16, and 2.43 ± 0.11, respectively. No systemic adverse effects were observed after inhalation exposure to TiN; however, histopathological findings (increased phagocytic macrophages and alveolar/bronchiolar epithelial hyperplasia) and Bronchoalveolar Lavage Fluid (BALF) analysis (elevated lactate dehydrogenase and gamma-glutamyltransferase values) showed adverse effects on the lungs in the middle and high-concentration groups. Based on these results, the no observed adverse effect concentration (NOAEC) is suggested to be 45 mg/m3.

Cyanobacteria, cyanotoxins and lipopolysaccharides in aerosols from inland freshwater bodies and their effects on human bronchial cells.

Components of cyanobacterial water blooms were quantified in aerosols above agitated water surfaces of five freshwater bodies. The thoracic and respirable aerosol fraction (0.1-10 µm) was sampled using a high-volume sampler. Cyanotoxins microcystins were detected by LC-MS/MS at levels 0.3-13.5 ng/mL (water) and < 35-415 fg/m3 (aerosol). Lipopolysaccharides (endotoxins) were quantified by Pyrogene rFC assay at levels < 10-119 EU/mL (water) and 0.13-0.64 EU/m3 (aerosol). Cyanobacterial DNA was detected by qPCR at concentrations corresponding to 104-105 cells eq./mL (water) and 101-103 cells eq./m3 (aerosol). Lipopolysaccharides isolated from bloom samples induced IL-6 and IL-8 cytokine release in human bronchial epithelial cells Beas-2B, while extracted cyanobacterial metabolites induced both pro-inflammatory and cytotoxic effects. Bloom components detected in aerosols and their bioactivities observed in upper respiratory airway epithelial cells together indicate that aerosols formed during cyanobacterial water blooms could induce respiratory irritation and inflammatory injuries, and thus present an inhalation health risk.

Issues in the inhalation toxicity testing and hazard assessment for low density particulate materials such as synthetic amorphous silica (SAS).

Inhalation toxicity testing of particulate materials is mandated for classification. According to CLP, particulate materials should be tested as marketed and many particulate materials are marketed as non-respirable particles. However, OECD TG 413 requires exposure to particle sizes that are respirable and reach the alveoli. The requirement for exposure of rats to respirable particles is thus in contrast to CLP and requires the application of high shear forces. The exposure to artificially small particles causes a number of issues that hamper the interpretation of the results of the testing. These issues are aerosol altering in the exposure system, assessment of the adversity of the inflammatory lung responses, inclusion of recovery groups, and extrapolation of the results to humans exposed under occupational condition. In addition, effects of many particulate materials after testing according to OECD 413 are not intrinsic properties, but a general reaction of the lung to the deposited material, show very similar NOAECs for chemical diverse materials, and often are completely reversible.